Problem in the BI system after upgrade

Hi,
We had EHP1 upgrade for BI 7.0 system.
After upgrade to SAPKW70107, we are facing error in mapping units to the keyfigures in transformation.
Before upgrade those objects were perfectly alright.
Please help us with some solution other than implementing SAP Notes.
Thanks in advance,
Geetha.

I'm not sure but have you checked following note?
[1490927 - UNIT CHECK from Note 1366474 too restrictive, RSTRAN 312|https://service.sap.com/sap/support/notes/1490927]

Similar Messages

Problem with the USB-connection after upgrade to P...

Hello to everybody!
After upgrading PC-suite, I can't establish a USB-connection with the phone.
Here are the facts:
1) My phone is the E90. Latest software installed (300.34.84)
2) PC-Suite version 7.0.9.2 english. I also tried the greek version, same problem with it also.
3) Nokia Connectivity Cable Driver 7.0.2.1. I also installed manually a previous version of the driver (7.0.2.0), but this didn't solve the problem.
4) I didn't have any problem with the older version of PC-suite.
5) I don't have a problem with the cable because the data-transfer-mode works fine.
6) Prior to any installation attempt, I always first uninstalled PC-suite and Cable-driver manually with the windows-xp uninstall program. This was not the fact, only in my first attempt, where I upgraded the pc-suite from inside the program itself.
Please help, because I can't backup and this is very important for me!
Solved!
Go to Solution.

Thank you all for your suggestions but nothing of the above worked for me.
After of hours and hours of installing and uninstalling of several versions of the pc-suite I solved the problem as following:
1) Uninstall manually (windows - control panel - add/remove programs)Nokia-PC-Suite, Nokia Connectivity Cable Driver AND PC Connectivity Solution!
2) Restart PC
3) Download and install the new version of Nokia-PC-Suite.
The tricky part is that you have to uninstall the application called "PC Connectivity Solution" manually and since the title of the application dosn't include the Nokia-Name you have first to find out that this program is Nokia-related!
Once again, thanks to everybody who took the time to make suggestions and especially to cricfancy who made me aware of the fact that PC Connectivity Solution is a nokia application!
Finally, I would like to make a statement for Nokia:
People, if you are not sure about an update then keep it in beta and don't make it available to the public!!! I lost hours and hours on search and made countless installs and uninstalls to find out what was wrong. Under the line, I had made no mistakes in my update from the start and the whole problem was based on your software! This is not acceptable!

Problem with the "from" field after upgrading to IOS 7

Dear list members,
For years I have been using multiple e-mail accounts with my iPhone 4 without any trouble. However, after I upgraded to IOS 7, a strange bug is happening.
When I try to send an e-mail from my iPhone, using my iCloud account, to another person or another account of mine, every time I type an address in the "to" field, the "from" field changes automatically to some of my other accounts (most of them from Google). Then I have to correct the "from" field every time, which is very annoying.
Is there a way to solve this bug?
Thank you for your attention.

I have a similar problem, using iPhone 4 and iPad 3. I can connect to the iPhone hotspot (iPhone show the blueish bar on top of its screen and says 1connection is active). So far so good, BUT, the iPad gets no symbol (the chain showing its linked) nor internet access. Sometimes the symbol comes but still no internet. By resetting the iPhones network settings I get it to work immidiately after, but after putting my iPad to sleep there will be the same issue over again. Please come up with a solution. Maybe I need to restore both devices? I don't like the idea though. It just works, huh?!?!?

Problem releasing the application module after upgrade to 11.1.1.2

We have recently upgraded from JDeveloper 11.1.1.1 to 11.1.1.2.
In the "tearDown()" method in our Unit Tests, the Application Module is realeased using:
private ApplicationModule am;
Configuration.releaseRootApplicationModule(am, true);
Alter the upgrade, this produces the following error:
oracle.jbo.JboException: JBO-33025: Failed to release application module MapServiceGlobal. Cookie handle not found.
Please Help.
FYI - this is the code that is used to create the application module:
Hashtable env = new Hashtable(2);
env.put(JboContext.INITIAL_CONTEXT_FACTORY,JboContext.JBO_CONTEXT_FACTORY);
env.put(JboContext.DEPLOY_PLATFORM, JboContext.PLATFORM_LOCAL);
try
InitialContext ic = new InitialContext(env);
ApplicationModuleHome home = (ApplicationModuleHome)ic.lookup(rootAM);
am = home.create();
catch (NamingException nex)
/* Handle the error here if you don't find it */
throw new NamingException("Application Module naming exception " + rootAM + " : " + nex.getMessage());
/* Connect the AM to a database connection */
am.getTransaction().connect(jdbcConnectionURL);
* Set the bundled exception mode so that exceptions are thrown in the
* same way as when we're running in the web application.
am.getTransaction().setBundledExceptionMode(true);
Thanks,
-Spiro

Hi,
I used OCEP 10.3.0.0 and upgraded the wlevs30 domain to PS6(11.1.1.7.0). and it worked without such error.
My experience is:
1) in OCEP 10.3.0.0 it needs not to add the security groups in atnstore.txt
2) you need to add <scratch-directory/> for Jetty in server's config.xml otherwise you will see the visualizer takes a long time to get up on Windows
Thanks
Junger

Does Anyone Have Problems with the Ear Speaker After upgrading to iOS7, 8 or 8.1?

HI. When ther's a voice call, the speaker for the ear has no sound (the mic is good) but they can hear and when I use the speakerphone the speakerphone works. Is this a bug with iOS 8 or 8.1 (or even 7)? or there's a setting I accidentally enabled that only allows the speakerphone with voice calls (for those who can't hold the phone like those who're injured)?
Thank you in advance. Have a great upcoming weekend.
God bless, Rev. 21:4

LOTS of people reporting a range of similar issues.
https://discussions.apple.com/thread/6648856
https://discussions.apple.com/thread/6574287

Problems to reconize the sim card after upgrade itunes, what should I do???

Problems to reconize the sim card after upgrade itunes, what should I do???

Get a SIM card from the carrier to whom the phone is legitimately locked.

Hallo, i have a problem with the intallation about after effects. I have a mac 10.6.8 and they told me I can't installete it because i don't have a system with 64 bit. how can i do? someone told me i can .. but i don't know how. thank you

hallo, i have a problem with the intallation about after effects. I have a mac 10.6.8 and they told me I can't installete it because i don't have a system with 64 bit. how can i do? someone told me i can .. but i don't know how. thank you

You cannot. If someone else told you there is a way then they will need to show you. After Effects requires a 64-bit system and the latest release requires Mac OS X v10.8 or v10.9 minimum

Hello! Help me please, I have a problem with the program occurred after the upgrade to version 3. 6. 16, namely by pressing the button 'Open a new tab' nothing happens. ?

Hello! Help me please, I have a problem with the program occurred after the upgrade to version 3. 6. 16, namely by pressing the button 'Open a new tab' nothing happens. ?

This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
See:
* [[Troubleshooting extensions and themes]]

'A problem with the cooling system' error message on Satellite A660

Hi all,
Hope I can get some help here. I've had about 5 HP laptops after all of them had problems and faults. I got sick of them and therefore got a refund and bought a high spec A660-1FH.
The A660 has been a great laptop for two days until yesterday when I started getting a warning message saying 'A problem with the cooling system has been detected. Please turn off the computer immediately, and return it for service'.
The cpu fan works fine as you can here it spinning and the temperature of the i5-460m processor is around 40 degrees for both cores - which seems normal to me. I've noted that it happens only when running on battery and if you switch from eco utility to power saver mode. Its fine when running on the 'balanced' power setting. The fan is louder before when this message appears.
As its under 28 days my retailer swapped it for a brand new one straight away. Got the new one home, and the same message appears again. Has anyone else experienced this. As two laptops have had this, I'm wondering if this is normal for the A660 series laptop or if there is really a hardware issue?!
I have tried to upgrade eco utility and the bios of the laptop but both are the latest versions. Can anyone help or share if they experience a similar issue with their laptop?
Thanks

In front of me I have Satellite A660-13Q (PSAW3E) and I have it about 6 weeks now. It runs almost 10 hours daily and until now I didnt notice such message or anything else that can be suspect for hardware functionality.
I really dont know why this happen on your notebook and dont think there is anything you can do about it.
I would exchange it again. What you can also try is to contact nearest Toshiba service. Make a call, explain the situation and ask if they can help you with this.

Problem with the EFI system partition's file system.

I installed latest yosemite 10.10.2 update - did a verify disk on “WDC WD1001FALS-403AA0 Media” (internal HD on my iMac 21.5-inch, Mid 2011) and got
Problems were found with the partition map which might prevent booting
Error: The partition map needs to be repaired because there’s a problem with the EFI system partition’s file system.
However a verify disk on the volume partition gets a clean bill of health!
I haven't done a 'repair disk' yet. Thought I'd check if anybody else has same message first.
Cheers

I had issues where my MacPro 8-core would not boot after the 10.7.4 upgrade, but my MacBook Air 13" 2011 upgrade worked just fine.
I had to restore my MacPro HD from my TimeMachine back up. Apparently, the Softraid raid drivers that I use on my MacPro are not compatible yet with 10.7.4. See here for more info:
http://macperformanceguide.com/blog/2012/20120511_1-MacOSX-SoftRAID.html
I contacted Softraid and they are already aware of the issues and are working with Apple for a fix.
Cheers.
Bud

CS5 can't preview the fonts image after upgrade the OS X 10.10.1

My CS5 can't preview the fonts image after upgrade the OS X 10.10.1,
Wanna try to reinstall the AI but my disc read error. Anyone has this problem or solution, Many Thanks!!

Thanks but can't find this "system transparency" setting inside the illustrator. Search the key word doesn't work...

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

Unable to get the login page after upgrade from 11.5.10.2 to R12

Hi ,
We are unable to get the login page after upgrade from 11.5.10.2 to R12, all the services are up and running.
Pls let me know if someone has come across this issue.
Thanks&Regards,
Apps DBA

Hi ,
After compile JSP files manually , now we are facing problem after logging.
Error : You have encountered an unexpected error.
Thanks&Regards,
Apps DBA

A problem with the cooling system has been detected

I bought a new computer not to long ago, I've had it for almost a month now. It runs fine, and I've had no problems until not too long ago. I was playing a game, and I got a random error message: "A problem with the cooling system has been detected. Please turn off the computer immdiately, and return it for service." I don't understand how or why this came up, and I don't have any money to return it for any type of repairs. After I got this message, I left my computer off for about an hour. All seems well so far. Any suggestions?

What laptop do you have?
- Peter

Problems with set up disc after upgrading hard drive

I am having problems starting up my Macbook after upgrading the hard drive from 80GB to 160GB. The new hd is SATA, a WDScorpio. The pins on the end look the same, and I've had no problem with the physical install. When I go to start up the Macbook, I get a gray screen and the "flashing manila file w/a question mark" icon. I load the disc while holding down the "C" key, and all that happens is the disc gets ejected. What am I doing wrong? I also have my hd backed up w/time machine in an external hd. Any ideas?

Turns out, my problem is a malfunctioning optical drive. My Macbook couldn't read the set up disc. This is the second time in a week that I have had this Macbook into the apple store for warranty repair work. Last week, It was a defective VGcable. Each trip to the Applestore is 115 miles round trip from where I live. I tried to get Apple to give me a new computer, but no dice. I even had a district manager in Boise Idaho hang up on me. It's too bad when they know they have a product which everyone loves, and wants to use. They can set the terms. How many things must go wrong before they just replace the @#$# thing? I bought the Macbook Feb 12th, so it's not that old. I have handled it with the utmost care. Anyway, I've tasted the forbidden fruit, and will continue to use Apple products. Thanks for your help. I'll probably have a much easier time with a computer that works. (knock on wood)

Problem in the BI system after upgrade

Similar Messages

Maybe you are looking for