Problem in updating 300 sequence files.

Hi,
    We have around 300 requirements and each requirement trace to one sequence file. So there are total 300 sequence files. In each sequence file we have a set of variables which hold the address which is present in map file.
    As you know for each release map file updates there by we need to modify all variables in all 300 sequence files and rerun. I would like to know any solution where I can store all variables in one text file and read a variable whenever I required.
   Please help me better solution for this type of problem.
   It would be great help if any sample sequece file attached.
Thanks,
krishna

Hi,
Why do you need 300 sequence files for 300 requirements??? You can keep each requirement in a seperate sequence in a single/multiple sequence files.
With regards to reading your variables, you can read from a file through activeX or easier still, doing it through a code module (say a LabVIEW VI or CVI module).
.......^___________________^
....../ '---_BOT ____________ ]
...../_==O;;;;;;;;_______.:/

Similar Messages

Database Polling - Using Update a Sequence File - Not working

Hi All,
We need to use the Database Adapter Polling feature to poll a table for inserts and updates. In the database configuration page of "After Read" , we have used "Update a Sequencing File".
But the process is not being triggered. Any one has successfully tried this option.
Do we need to do any additional configurations ?
Please respond. Its urgent.
Thanks,
Sayama

If this is your first time working with the Property Loader I recommend the following steps:
- Save the Sequence File and go to Tools-> Import/Export Properties…
- Set the Data Location to be a File (You can change it later if you need to use a Database).
- Enter the file path.
- Select a File Format.
- Go to the Properties Tab and from the Available properties list (tree) select your global variable. The global variable should appear in the selected properties list.
- Click the Export Button.
- If you go back to the Source Destination File and click on View File you will notice that the file you selected was generated and that it has a special format.
You will identify the name of your variable under <File Globals> and the variable value under ‘Variable Value’.
Change the variable value to whatever value you want and save the file.
- Now, if you click the Import Button, the tool will get the value from the source file and set the edit-time copy of the sequence global variable to the value you entered in the file.
- Click the Done button and go and check the value of the sequence global variable. The value should be the value you entered in the file.

Customizing AM Images & Facing Problem in Update & Deploy War files

Hey Guys!
This is Yash Bansal from Gurgaon, India. i am new to access manager. i am now customizing it and facing problem in customizing.
I have customized images which is present in directory path:
opt/SUNWam/web-src/services/images/
and updated services.war file which is present in directory path:
opt/SUNWam/war/
with command
jar -uvf services.war /opt/SUNWam/web-src/services/images/login-backimage.jpg
then deployed configuration from the web server 7.0 admin console.
after that when i open the url
http://<hostname>/amserver/console
then Page Not Found error comes in the browser.
Just wanted to ask you guys am i doing the steps right. please help if someone know how to update and deploy war file on Sun Web server 7.0.
Thanks & Regards,
Yash Bansal

Hi!
Deploying the configuration does not (re)deploy the application. Webserver stores a copy of the deployed application and all configurations in the admin instance. When you change anything in the webserver console it is first written there and only applied to the productive instance when you deploy configuration.
When you add images, jsps or something else to /opt/SUNWam/... and want it redeployed you have to use amconfig command. in /opt/SUNWam/bin there is a file called amsamplesilent. You have to fill the values in this file and then use
./amconfig -s amsamplesilent
I believe for a redeploy you have to set DEPLOY_LEVEL to 21, not sure here, check documentation.
I personally usually do not redeploy for images and such, I simply copy them directly the deployed location.
Why http://.../amserver/console does not work anymore, I have no idea. But at least after a redeploy it should be there again.
hth Chris

Problems with updating old .EPS files

Hi All,
We have a strange need to resave/update old .EPS files with color TIF previews. The problem occurs when Illy files are relink in either Quark/Indy and are updated with the wrong import size and/or positions shifted. My conclusion from varies tests suggest it's the preview that is causing layouts to rethink that it's a new file and therefore reposition the updated links. Does anyone know a working solution that can prevent image import percentage from changing or art positions from shifting?
Thank you!

Bump.
Is there no solution for this problem?

Update All Sequence files automatically (Types)

We have a very large number of sequence files that need to be updated. The "Types" have changed.
Is there a way to have TestStand (2010 f1) update all the files in a Directory, or hopefully recursively?
What I'm used to doing is to check all the files out of our Version Control, select about 20 files at a time and open them in TestStand, Save them all and then close them, then do another set...
Is there a faster way? (I would expect to check them out of Version Control.)
Mike
Solved!
Go to Solution.

Take a look at the Sequence File Converter located at Tools >> Update Sequence Files
CTA, CLA, MTFBWY

Problem with loading a Sequence File - Limited Windows Account

Dear Sirs,
I have a problem and a very less time to fix it; so I'm asking for your kind help.
I have a production PC, with a Debug Deploy License of TS 3.1 and LV 7.1; the operating system is Win XP SP2.
No problem when I login the session with my Administrator Windows Account; on the contrary, when I try to login with a Limited Windows Account, I'm not able to load my Sequence File, and the text appearing is attached to this message.
Someone can advise me a solution to quickly solve my problem?
Thank you very much and Best Regards.
Stefano
Attachments:
TS_error_winXP_login_limited_account.jpg ‏224 KB

Stefano,
if you open files in TestStand, TestStand tracks this in different configuration files (for example for the "most recently used" list). Therefore, TestStand tries to save these changes in the ini-files. It seems to me, that the installationdirectory of TestStand is not permitted to be used for writing for your user login in Windows.
So you have different solutions here, the simpliest being:
Give your user the right to write files into the < TestStand >\-folder.
hope this helps,
Norbert B.Message Edited by Norbert B on 11-16-2006 07:28 AM
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Problem in updating a jar file

Hi ...
Anyone help me for updating a jar file in windows.
I am updating a jar file Using Runtime.exec() method.. But it shows an error like this:
java.io.IOException: Error in writing existing jar file
at sun.tools.jar.Main.run(Main.java:198)
at sun.tools.jar.Main.main(Main.java:1022)
I am using jdk1.6 and ant tool for build.

Stick to your old thread please.
[http://forums.sun.com/thread.jspa?threadID=5320704&messageID=10371347#10371347]
I'll delete this one soon.

Update 700 Sequence Files

A couple years ago we created a template for all of our TestStand sequences which included the "Setup" and "Cleanup" using discrete subsequence calls and to simplify and add functionality I've created a new Master Initialize and Cleanup
OLD FORMAT:                                         NEW FORMAT:
Setup:                                         Setup:
Initialize Network                           Master Initialize
Initialize Database
Record Tester Information
    (More exist here as well)
Main:                                           Main:
(Specific Test)                                (Specific Test)
Cleanup:                                      Cleanup:
Report Test Status                         Master Cleanup
Close Database
Close Network
End                                              End
Also, the original templates did NOT include the required Locals.ResultList variable (the author deleted this from all of the templates, and thus from all of the tests). We've changed from a home grown XML reporting (problematic) to use the existing TestStand HTML reporting and this variable is required.
So I need to update all of the test sequences that we have to:
1. Replace the existing Startup steps with the new "Master Initialize".
2. Replace the existing Cleanup steps with the new "Master Cleanup".
3. Add the Locals.ResultList variable back into the scripts.
Problem is that I have nearly 700 test sequences to update with these 3 changes.
   I have considered changing the first sequence in Setup to call the Master Init a and similar to the Cleanup to call the Master Cleanup and make all of the others basically null calls (exit immedately), but we may need these some other functions and I still need to add in the Locals.ResultList variable anyway.
SO the question is:
Is there an easier way to update these 700 sequences besides doing the necessary:
     Delete Setup
     Paste New Setup
     Delete Cleanup
     Paste New Cleanup
     Paste Locals.ResultList variable
Mike

You can use a simple program to automate this for you. You will have to call the TestStand API to do these copy paste and delete work for you.
Are you using LabVIEW...? What is you exact requirement...? From your post what I understand is you have to delete few steps in the setup and cleanup and insert sequence call steps there. Is that correct...?
Thanks,
Sathish

Problem in updating in MDB file

I am using MDB file to store the user name and password. As per my requirement once user name is matched then password needs be updated. But unfortunatelly it is not working.
In my database col1 is user name and col2 is password.
For Update I am using SQL query File name is Write username and pass - Update Using SQL.vi
But I am able to update using update library
Attached vi and database for reference
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet
Attachments:
Database Update.zip ‏795 KB

Stick to your old thread please.
[http://forums.sun.com/thread.jspa?threadID=5320704&messageID=10371347#10371347]
I'll delete this one soon.

Problem in updating files in BPM

Hi ,
I have a question where I need to append two files and send them as one file at the receiver by using a coorelation.
Lets Say we have two files -File A and File B both in delete mode .Both are required to be appended and sent as one file ,say AB on the basis of a correlation on a unique value .(e.g division number ).
Acc to the project requirement ,After sending a file A ,If once again a new file of A (e.g A(1)) is updated before the second file B reaches the BPM ; We should append the latest file( A(1) ) with B ,and send it across the receiver .(In this case the result file should become A(1)B ).To achive this we are using a container operation in assign mode and hoping that every new message of same type is overwritten.
But everytime we are updating the file A it opens a new instance of BPM although the coorelation Id is same .
When we send file B with that coorelation ID as of file A,it closes both the instances and creates two file , AB and A(1)B.
We wish that the BPM discards the old file(A) and uses the updated file( A(1) ) in the same instance and puts it on the receiver .
I would like to know if XI behaves in this way only or we are missing something .
Thanks and Regards ,
Neha.

Hi,
Why do you need 300 sequence files for 300 requirements??? You can keep each requirement in a seperate sequence in a single/multiple sequence files.
With regards to reading your variables, you can read from a file through activeX or easier still, doing it through a code module (say a LabVIEW VI or CVI module).
.......^___________________^
....../ '---_BOT ____________ ]
...../_==O;;;;;;;;_______.:/

Polling for database updates fails to update sequence file/table

I have a small system to poll for changes to a database table of student details. It consists of:
Database adapter, which polls the database for changes, retreives a changed row, and passes the generated XML to -
"receive" router service, which simply passes the retrieved database XML data to -
"execute" router service, which transforms the XML and passes the new message to -
File Adapter, which writes the transformed XML to a file.
The problem is that the database polling is not updating the sequence recorder - I have tried using a sequence file which stores the personnumber, a sequence table which stores the personnumber and a sequence table which stores the last-updated timestamp. In all cases the database adapter successfully reads the sequence file/table and retreives the correct row, based on the sequence value ( I have tested this by manually changing the sequence value), the data is transformed and a correct xml file is created, but the system then fails to update the sequence file/table so that when the next polling time comes around the very same database row is extracted again and again and again.
In the ESB control panel I have one error: "Response payload for operation "receive" is invalid!"
The Trace is:
oracle.tip.esb.server.common.exceptions.BusinessEventRejectionException: Response payload for operation "receive" is invalid! at oracle.tip.esb.server.service.EsbRouterSubscription.processEventResponse(Unknown Source) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(Unknown Source) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscription(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(Unknown Source) at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(Unknown Source) at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.processMessage(Unknown Source) at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.onMessage(Unknown Source) at oracle.tip.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage(MessageEndpointImpl.java:281) at oracle.tip.adapter.db.InboundWork.onMessageImpl(InboundWork.java:1381) at oracle.tip.adapter.db.InboundWork.onMessage(InboundWork.java:1291) at oracle.tip.adapter.db.InboundWork.transactionalUnit(InboundWork.java:1262) at oracle.tip.adapter.db.InboundWork.runOnce(InboundWork.java:501) at oracle.tip.adapter.db.InboundWork.run(InboundWork.java:401) at oracle.tip.adapter.db.inbound.InboundWorkWrapper.run(InboundWorkWrapper.java:43) at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242) at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215) at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819) at java.lang.Thread.run(Thread.java:595)
The payload is:
<PersonCollection xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/ISSSimIN">
<Person>
<name>Bob</name>
<surname>Stupid</surname>
<istatus>2</istatus>
<active>Active</active>
<personnumber>3001</personnumber>
<role>Staff</role>
<organization>TEX</organization>
<updateTimestamp>2007-11-29T14:06:55.000+00:00</updateTimestamp>
</Person>
</PersonCollection>
The payload above is the XML output from the Database adapter, the xsd for which was autogenerated by JDeveloper, so I don't understand how it can be invalid.
I have only been working with ESB for 3 days, but half of that time has now been spent stuck on this issue. Anyone got any ideas??
Richard

You need to be careful. Submit and committing to the database are two different things.
Submit on a page (and autoSubmit the property) are only posting the changes you typed into the field, back down to the application server. NOTHING is happening with the database at this point. So the applications's internal "cache" of records (using something like ADF BC) is holding the changes but the database doesn't know anything. So if you quit now, no changes will go to the database.
These changes onlyget submitted down to the app server when you do some sort of action like press a button. Simply navigating fields will be doing nothing back to the app server. If you add autoSubmit then you will automatically submit the changes on that field down to the app server when you leave the field (but again, this is not touching the database)
You have to explicitly add a COMMIT operation to save those changes to the database.
Maybe if you try in a simple EMP example and send us your findings we can help direct you further.
Regards
Grant

Xml file problems to update

hello experts i have a problem to update my xml file in mime folder im using resourcepath to generate the url then write it in.
so i have an iframe that load an html file in mime folder too. but this html show the xml file content but not show the last changed
can you help me pls !

i make the changes in the xml file using webdynpro:
xmlUrl = WDURLGenerator.getResourcePath
(wdComponentAPI.getComponent().getDeployableObjectPart(), "NOTICIAS/xml/eboseNews.xml");
DocumentBuilderFactory factory;
factory = DocumentBuilderFactory.newInstance();
factory.setValidating(true);
DocumentBuilder builder = factory.newDocumentBuilder();
Document xmldoc = builder.parse(xmlUrl);
xmldoc.getDocumentElement().normalize();
//NUEVO NODO HIJO DE CHANEL
Element itemElement = xmldoc.createElement("item");
IPublicFormularioCust.ICabNoticiaElement elemCab = wdContext.currentCabNoticiaElement();
//NODOSS HIJOS DE ITEM
Element titleElement = xmldoc.createElement("title");
titleElement.appendChild(xmldoc.createCDATASection(elemCab.getTitulo().trim()));
Element linkElement = xmldoc.createElement("link");
linkElement.appendChild(xmldoc.createCDATASection("docs/" + elemCab.getLink().getResourceName().trim()));
Element descripElement = xmldoc.createElement("description");
descripElement.appendChild(xmldoc.createCDATASection(elemCab.getDescripcion().trim()));
Element categoryElement = xmldoc.createElement("category");
categoryElement.appendChild(xmldoc.createCDATASection(elemCab.getCategoria().trim()));
Element pubdateElement = xmldoc.createElement("pubDate");
pubdateElement.appendChild(xmldoc.createCDATASection(new SimpleDateFormat("dd/MM/yyyy").format(Constantes.FECHACTUAL)));
//AGREGANDO NODOS HIJOS A ELEMENTO ITEM
itemElement.appendChild(titleElement);
itemElement.appendChild(linkElement);
itemElement.appendChild(descripElement);
itemElement.appendChild(categoryElement);
itemElement.appendChild(pubdateElement);
//AGREGANDO ELEMENTO ITEM
Node channelNode = xmldoc.getDocumentElement().getElementsByTagName("channel").item(0);
channelNode.insertBefore(itemElement, xmldoc.getElementsByTagName("item").item(0));
//Serializando el XMLDOC en un StringWriter
xmlSerializer.serialize(xmldoc);
FileWriter fw = new FileWriter(new File(xmlUrl));
fw.write(sw.toString());
so later i can see the changes but when i reloaded the page dont appear the changes only have the information when i deployed the project. This xml is show in with javascript. This javascript belongs to html file that is loaded into a iframe.

Updating a sequential file in Polling - DB adapter

Hi,
I am using DBAdapter to poll a table in the database and i have chosen 'Update a Sequencing File' option as the operation to be performed after the read. I was running the process on my local bpel server and was able to select a file on my system. I need to deploy the process in another Env and i was wondering what kind of format should be followed for the path and the file name? How do i specify a remote file in here?
The process remains in the off state as it is not able to recognize the file path. Please Help.
Thanks,

Hi there,
the full path on the system where it is running must be provided.
The 'Update a Sequencing File' is good for development but storing the value in a file somewhere on your system can quickly become a problem. The option 'Update a Sequencing Table in Another Database' gives you the non-obtrusiveness of the file based approach but stores the value in a database table. It is a little bit more work to set up but likely worth it over time.
Thanks
Steve

Updating a biar file - database connection

Hi,
I would like to know if there is a way of doing the following:
I have a biar file that was exported from a universe that I don't have access anymore. This original biar file doesn't have database connections set.
I am not able to connect directly to the machine I want to import the biar file using Designer, I can just use an alternative IP that is not the main one linked to machine's hostname (that is the Enterprise name). This alternative IP is the only one I have access to all ports, as you already know, I am not able to connect to it using Designer because it is not the CMS name.
I imported the biar file using command line.
Now I want to update database connection, how can I perform that? Is it there a way?
Thank you in advance,
A.

Hi there,
the full path on the system where it is running must be provided.
The 'Update a Sequencing File' is good for development but storing the value in a file somewhere on your system can quickly become a problem. The option 'Update a Sequencing Table in Another Database' gives you the non-obtrusiveness of the file based approach but stores the value in a database table. It is a little bit more work to set up but likely worth it over time.
Thanks
Steve

Update links in file created based on the template page

Hello everyone:
a) I have problems when update links in files crated based on
a template page.
I read Dreamwaver (DW) help menu. Seems to me Dreamwaver is
smart enough to update links based on correct file structure.
I created a template file based on a sample page. Template
file saved to the template folder. Then I crated few pages based on
the template. I checked links in new files and found that link
structures are based on template folder, not based on files current
folder position.
Please give me some suggestions on how to correct this
problem. If you know some good online tutorial or documentations
please share with me.
b) Can DW template update Navigation bar links correctly
based on relative document path?
I have Navbars imported from Fireworks into DW. Files crated
based on template are not updating pop-up menu links correctly. I
manually updated every links. It is time consuming and

> I created a template file based on a sample page.
Template file saved to
> the
> template folder. Then I crated few pages based on the
template. I checked
> links
> in new files and found that link structures are based on
template folder,
> not
> based on files current folder position.
This means that you are entering the links manually, not
using the Property
inspector and browsing to the target file. You should do it
this way until
you understand how templates work. All links in a template
file should
(usually) be one of three kinds -
1. Document relative BASED ON THE TEMPLATE, e.g.,
<a href="../whatever....
2. Root relative, e.g.,
<a href="/whatever....
3. Absolute, e.g.,
<a href=''
http://www.example.com/whatever....
Anything else will always result in the Template folder being
placed in the
path for the link when you create a child page.
> b) Can DW template update Navigation bar links correctly
based on relative
> document path?
Yes, of course.
> I have Navbars imported from Fireworks into DW.
This could easily be one of your problems. Those menus are
definitely
broken and should never be used.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"sjmacro" <[email protected]> wrote in
message
news:[email protected]...
> Hello everyone:
>
> a) I have problems when update links in files crated
based on a template
> page.
>
> I read Dreamwaver (DW) help menu. Seems to me Dreamwaver
is smart enough
> to
> update links based on correct file structure.
>
> I created a template file based on a sample page.
Template file saved to
> the
> template folder. Then I crated few pages based on the
template. I checked
> links
> in new files and found that link structures are based on
template folder,
> not
> based on files current folder position.
>
> Please give me some suggestions on how to correct this
problem. If you
> know
> some good online tutorial or documentations please share
with me.
>
> b) Can DW template update Navigation bar links correctly
based on relative
> document path?
> I have Navbars imported from Fireworks into DW. Files
crated based on
> template are not updating pop-up menu links correctly. I
manually updated
> every
> links. It is time consuming and
>
>

Problem in updating 300 sequence files.

Similar Messages

Maybe you are looking for