Updating a biar file - database connection

Hi,
I would like to know if there is a way of doing the following:
I have a biar file that was exported from a universe that I don't have access anymore. This original biar file doesn't have database connections set.
I am not able to connect directly to the machine I want to import the biar file using Designer, I can just use an alternative IP that is not the main one linked to machine's hostname (that is the Enterprise name). This alternative IP is the only one I have access to all ports, as you already know, I am not able to connect to it using Designer because it is not the CMS name.
I imported the biar file using command line.
Now I want to update database connection, how can I perform that? Is it there a way?
Thank you in advance,
A.

Hi there,
the full path on the system where it is running must be provided.
The 'Update a Sequencing File' is good for development but storing the value in a file somewhere on your system can quickly become a problem. The option 'Update a Sequencing Table in Another Database' gives you the non-obtrusiveness of the file based approach but stores the value in a database table. It is a little bit more work to set up but likely worth it over time.
Thanks
Steve

Similar Messages

UPDATE VALUE IN ACCESS DATABASE-CONNECTIVITY DATABASE?

Hi to all labviewers,
I'm trying to update some values in my access database with sql and labview connectivity toolset but i got
an error, what is the problem whit my code?
note: when i try to update one colum it's work fine.
regard's
eyal.
Attachments:
UPDATE_ACCESS.JPG ‏79 KB

Hi,
I'm not sure if you can use comma's to seperate criteria. Thy this:
WHERE criteriuma='something' AND criteriumb='something else'
Regards,
Wiebe.
"Discussion Forums" <[email protected]> wrote in message news:[email protected]..
Hi to all labviewers,
I'm trying to update some values in my access database with sql and labview connectivity toolset but i got
an error, what is the problem whit my code?
note: when i try to update one colum it's work fine.
 
regard's
eyal.
UPDATE_ACCESS.JPG:
http://forums.ni.com/attachments/ni/170/152737/1/UPDATE_ACCESS.JPG

How to read a passward protected excel file with the help of database connectivity tool kit

hi, i was reading an excel file with the help of database connectivity tool kit in labview 8.0
i made tabels in the excel file nand made odbc connection and specified the workbbok name.
now my problem is how to read the same file if i specife a pasword to that excel file ?

Hi,
Check out this thread about opening a password-protected Excel file using ActiveX. This should take care of it for you!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

Problem in using javabean database connections file

Hi..I have a javabean file which contains some database connections.I would like to use this file in another javabean file. However, I got this 'cannot resolve symbol' error on the following line.The two javabean files i have here are sqlBean and TransactInfoBean which are contained in the same package.
<coding>
public class TransactInfoBean extends sqlBean {
</coding>

Did you check the class path.
The folder containg the package shold be set to classpath.
If you send your total error messages , i can help you more.
Regards

Database Polling - Using Update a Sequence File - Not working

Hi All,
We need to use the Database Adapter Polling feature to poll a table for inserts and updates. In the database configuration page of "After Read" , we have used "Update a Sequencing File".
But the process is not being triggered. Any one has successfully tried this option.
Do we need to do any additional configurations ?
Please respond. Its urgent.
Thanks,
Sayama

If this is your first time working with the Property Loader I recommend the following steps:
- Save the Sequence File and go to Tools-> Import/Export Properties…
- Set the Data Location to be a File (You can change it later if you need to use a Database).
- Enter the file path.
- Select a File Format.
- Go to the Properties Tab and from the Available properties list (tree) select your global variable. The global variable should appear in the selected properties list.
- Click the Export Button.
- If you go back to the Source Destination File and click on View File you will notice that the file you selected was generated and that it has a special format.
You will identify the name of your variable under <File Globals> and the variable value under ‘Variable Value’.
Change the variable value to whatever value you want and save the file.
- Now, if you click the Import Button, the tool will get the value from the source file and set the edit-time copy of the sequence global variable to the value you entered in the file.
- Click the Done button and go and check the value of the sequence global variable. The value should be the value you entered in the file.

Changing database connection details aftre WAR file deployment

Hello,
I create a WAR deployment file and distribute this to a Tomcat web container. The package unpacks as expected however the production database details are different from my devlopment environment. The database connection name is the same. I thought if I simply change the connection details in the connections.xml file and restart the web app this would do the trick. It does not. What am I missing?

Maybe your application is using a connection as defined in data-sources.xml. Check there.

Where do I put the .jar file for the database connection?

I am trying to connect to an Oracle 11g database. I see under the coldfusion settings summary that the java version is 1.7.0_55. So I downloaded the ojdbc7.jar file from Abode.com. Now the question is where do I put it so that coldfusion can access it?
Of course I need to set up the database connection (which I still don't have the connection string for), but I still need to know where to put the ojdbc.jar file.
Thanks.

jasonwryan wrote:What does the man page say?
The program has builtin defaults and temperature thresholds but users
can specify their own settings in configuration files
/etc/default/i8kmon and ~/.i8kmon. The daemon defines 4 states with
different fan speeds ({0 0}, {1 0}, {1 1}, {2 2}) and for each state
are defined the temperature thresholds which cause the switching to a
higher or lower state. Furthermore each state can have different
thresholds for operation on ac power or battery. For example the fol‐
lowing configuration:
I've put the following file in /etc/default/i8kmon:
# Run as daemon, override with --daemon option
set config(daemon) 0
# Automatic fan control, override with --auto option
set config(auto) 1
# Report status on stdout, override with --verbose option
set config(verbose) 1
# Status check timeout (seconds), override with --timeout option
set config(timeout) 1
# Temperature thresholds: {fan_speeds low_ac high_ac low_batt high_batt}
set config(0) {{-1 0} -1 50 -1 50
set config(1) {{-1 1} 50 70 50 70}
set config(3) {{-1 2} 70 128 70 128}
But it doesn't seem to do anything. I'm running a Dell Inspiron 3521 with no dedicated GPU, so it only has one fan. I was somehow able to get i8kmon to work in Ubuntu by putting this config in /etc/i8kmon, but can't get it to work in Arch. Putting it in /etc/i8kmon and /etc/default/i8kmon doesn't do anything.

TS3694 help, im trying to update my iphone but it kept saying connect to itunes, i have updated, run the file over and over but its still stuck to connect to itunes, wat can i do? thanx

help, im trying to update my iphone but it kept saying connect to itunes, i have updated, run the file over and over but its still stuck to connect to itunes, wat can i do? thanx

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work

Regarding using a javabean database connections file

Hi..I have a javabean file which contains some database connections.I would like to use this file in another javabean file. However, I got this 'cannot resolve symbol' error on the following line.The two javabean files i have here are sqlBean and TransactInfoBean which are contained in the same package.
<coding>
public class TransactInfoBean extends sqlBean {
</coding>

Are you sure you've got everything right ? One big problem with Java is that there is a difference between myClass and MyClass. A simple capital can make a big difference.

Trying to download update to CoPilot Live and CoPilot GPS with maps. files sizes are large and taking hours to download on wireless connection. How can I download App updates and new maps while connected to PC and Itunes through hard wire internet link?

Trying to download update to CoPilot Live and CoPilot GPS with maps. Files sizes are large and taking hours to download on wireless connection. How can I download updates and new maps while connected to PC and Itunes through hard wire internet link?

I'm on my iPad, so I don't know if this is the page with an actual download. I don't see a button, but assume that is because I am on an iPad. It is in the DL section of Apple downloads.
http://support.apple.com/kb/DL1708

4.1 SP4 Import BIAR File and change connection information

Hi experts,
I have generated an LCMBIAR (contains Dashboard and Webi, Universe) in our current system landscape and we are trying to move this BIAR file to another system. However if we are to import this biar file into another system that is not connected to our current system landscape we need to be able to configure the DB connection information to point to new system DB. Is it possible to change the connection information for the universe when you importing the BIAR file, if yes, could you please give me the STEP by STEP instructions.

Hi,
1. Refer the following KBA -
1759284 - How To: Step-by-Step LCM Override Settings via LCMBIAR file
2. Then promote the reports and connections to the destination using Promotion manager.
Hope this helps.
Regards,
Rukaiya

Dreamweaver PHP file not connecting to SQL Database.

Hi I am using Dreamweaver CC, I have a MYSQL connection set up. I want to create a recordset and when I choose the define my connection option, it comes up with a pop-up screen the says: 'testing database connection' it loads for some time and then quickly closes down and comes back up immediately. It should be connecting fine and I don't know what to do as it isn't even giving me an error message to work off of! Any ideas? Thanks

Jana,
Your TNSNAMES.ORA file will be found in a path similar to this one:
C:\Oracle\Ora81\NETWORK\ADMIN
The file may looks similar to this:
ORA1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.xx.xxx)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ora1)
When you log on to SQL*PLUS try:
USERNAME: system
PASSWORD: manager
HOSTNAME: (leave blank)
If you still get an error, refer to your TNSNAMES.ORA file to see what your host name should be (in my example, it is ORA1).
If you still get an error after filling in the hostname, launch server manager (C:\Oracle\Ora81\BIN\SVRMGRL.EXE), then try to start the database:
SVRMGR> CONNECT INTERNAL
SVRMGR> STARTUP
Good luck,
Emily
[email protected]

How to use JNDI datasource instead of database connection settings JDev 10g

Hi,
In order to use the different database from other environments, we are not able to use the JNDI datasource configuration settings, all the time need to configure the database connection settings from JDeveloper by changing the database connectivity settings in the JDeveloper for each environment separately, need a solution on how to make the database connectivity unique using the JNDI datasource name for all the environments for database connectivity settings through the application server console rather than changing the database adapter configuration in JDeveloper.
Please provide the update at the earliest. Your help is greatly appreciated. Thanks in advance..

What are you not clear on?
What you need to do is get your developers to conform to a database naming standard, as stated above, so if you have an oracle database that is for eBusiness Suite you get all developers to create a DB connection in JDev called, ora_esb as an example.
When the developer creates a DB adapter this will create a JNDI name of eis/DB/ora_ebs. When the BPEL project is deployed it looks for the JNDI name in the oc4j-ra.xml file to see its connection details. If they don't exist then they use the developers connection details. The issue with this is that they generally always point to the development DB. It is best practice for the developers to remove the mcf settings in the DB adapter WSDL. This way if the JNDI name has not been configured it will fail.
So when you migrate from dev-test-prod what you have is the JNDI name eis/DB/ora_ebs. The dev points to the dev instance of ebs, test points to the test instance and so on. This means that you don't need to adjust any code in the BPEL projects.
cheers
James

When using the Database Connectivity Toolset, reads and writes with long binary fields are incompatible.

I am trying to write LabVIEW Variants to long binary fields in a .mdb file using the Database Connectivity Toolset. I get errors when trying to convert the field back to a variant after reading it back from the database.
I next tried flattening the variant before writing it and ultimately wound up doing the following experiments:
1) If I use DB Tools Insert Data to write an ordinary string and read it back using a DB Tools Select Data, the string is converted from ASCII to Unicode.
2) If I use DB Tools Create Parameterized Query to do an INSERT INTO or an UPDATE operation, specifying that the data is BINARY, then read it back using a DB Tools Select Data,
the length of the string is prepended to the string itself as a big-endian four-byte integer.
I can't think of any way to do a parameterized read, although the mechanism exists to return data via parameters.
Presuming that this same problem affects Variants when they are written to the database and read back, I could see why I get an error. At least with flattened strings I have the option of discarding the length bytes from the beginning of the string.
Am I missing something here?

David,
You've missed the point. When a data item is flattened to a string, the first four bytes of the string are expected to be the total length of the string in big-endian binary format. What is happening here is that preceding this four-byte length code is another copy of the same four bytes. If an ordinary string, "abcdefg" is used in place of the flattened data item, it will come back as <00><00><00><07>abcdefg. Here I've used to represent a byte in hexadecimal notation. This problem has nothing to do with flattening and unflattening data items. It has only to do with the data channel consisting of writing to and reading from the database.
I am attaching three files that you can use to demonstrate the problem. The VI file c
ontains an explanation of the problem and instructions for installing and operating the demonstration.
Ron Martin
Attachments:
TestLongBinaryFields.vi ‏132 KB
Sample.UDL ‏1 KB
Sample.mdb ‏120 KB

Tomcat JDBC Realm Database Connection Error

Hello all,
I am trying to edit the server.xml file on Tomcat so I can use the JDBC Realm instead of the MemoryRealm. Hence, I will be able to read users, passwords and roles from a relational database instead of from the tomcat-users.xml.
I have tried following all the guides on the net I can find, my server.xml looks as follows (after making changes to allow it to use JDBC realm). The only problem is, when I try to run the application the server outputs the following: (after all of these errors have been kicked up a pop-up box then appears titled "Tomcat Manager Application", it asks for a User Name and Password. I have tried the standard user name of "ide" and the password next to it in tomcat-users.xml but it won't accept it. (I am using the netbeans IDE)).
Please could someone suggest any ideas of how I can get the server.xml to work with JDBC realm?
Using CATALINA_BASE:   C:\Documents and Settings\Administrator\.netbeans\5.0beta\jakarta-tomcat-5.5.7_base
Using CATALINA_HOME:   C:\Program Files\netbeans-5.0beta\enterprise2\jakarta-tomcat-5.5.7
Using CATALINA_TMPDIR: C:\Documents and Settings\Administrator\.netbeans\5.0beta\jakarta-tomcat-5.5.7_base\temp
Using JAVA_HOME:       C:\j2sdk1.4.2_08
Created MBeanServer with ID: 1f934ad:107444b1d2b:-8000:ravinder-rdnzoa:1
31-Oct-2005 01:29:33 org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8084
31-Oct-2005 01:29:34 org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8443
31-Oct-2005 01:29:34 org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 2174 ms
31-Oct-2005 01:29:34 org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
31-Oct-2005 01:29:34 org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.7
31-Oct-2005 01:29:34 org.apache.catalina.realm.JDBCRealm start
SEVERE: Exception opening database connection
java.sql.SQLException: org.gjt.mm.mysql.Driver
        at org.apache.catalina.realm.JDBCRealm.open(JDBCRealm.java:646)
        at org.apache.catalina.realm.JDBCRealm.start(JDBCRealm.java:720)
        at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1003)
        at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:440)
        at org.apache.catalina.core.StandardService.start(StandardService.java:450)
        at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
        at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
        at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)
31-Oct-2005 01:29:34 org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
31-Oct-2005 01:29:36 org.apache.catalina.startup.ContextConfig validateSecurityRoles
INFO: WARNING: Security role name IBM used in an <auth-constraint> without being defined in a <security-role>
31-Oct-2005 01:29:36 org.apache.catalina.startup.ContextConfig validateSecurityRoles
INFO: WARNING: Security role name Auditor used in an <auth-constraint> without being defined in a <security-role>
31-Oct-2005 01:29:37 org.apache.struts.tiles.TilesPlugin initDefinitionsFactory
INFO: Tiles definition factory loaded for module ''.
31-Oct-2005 01:29:37 org.apache.struts.validator.ValidatorPlugIn initResources
INFO: Loading validation rules file from '/WEB-INF/validator-rules.xml'
31-Oct-2005 01:29:37 org.apache.struts.validator.ValidatorPlugIn initResources
INFO: Loading validation rules file from '/WEB-INF/validation.xml'
31-Oct-2005 01:29:38 org.apache.catalina.startup.ContextConfig validateSecurityRoles
INFO: WARNING: Security role name IBM used in an <auth-constraint> without being defined in a <security-role>
31-Oct-2005 01:29:38 org.apache.struts.tiles.TilesPlugin initDefinitionsFactory
INFO: Tiles definition factory loaded for module ''.
31-Oct-2005 01:29:38 org.apache.struts.validator.ValidatorPlugIn initResources
INFO: Loading validation rules file from '/WEB-INF/validator-rules.xml'
31-Oct-2005 01:29:38 org.apache.struts.validator.ValidatorPlugIn initResources
INFO: Loading validation rules file from '/WEB-INF/validation.xml'
31-Oct-2005 01:29:39 org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-8084
31-Oct-2005 01:29:39 org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-8443
31-Oct-2005 01:29:40 org.apache.jk.common.ChannelSocket init
INFO: JK2: ajp13 listening on /0.0.0.0:8009
31-Oct-2005 01:29:40 org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/60 config=null
31-Oct-2005 01:29:40 org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
31-Oct-2005 01:29:40 org.apache.catalina.startup.Catalina start
INFO: Server startup in 5738 ms
31-Oct-2005 01:29:40 org.apache.catalina.realm.JDBCRealm authenticate
SEVERE: Exception performing authentication
java.sql.SQLException: org.gjt.mm.mysql.Driver
        at org.apache.catalina.realm.JDBCRealm.open(JDBCRealm.java:646)
        at org.apache.catalina.realm.JDBCRealm.authenticate(JDBCRealm.java:344)
        at org.apache.catalina.authenticator.BasicAuthenticator.authenticate(BasicAuthenticator.java:181)
        at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:446)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
        at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
        at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
        at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:825)
        at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:738)
        at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:526)
        at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
        at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
        at java.lang.Thread.run(Thread.java:534)
31-Oct-2005 01:29:40 org.apache.catalina.realm.JDBCRealm authenticate
SEVERE: Exception performing authentication
java.sql.SQLException: org.gjt.mm.mysql.Driver
        at org.apache.catalina.realm.JDBCRealm.open(JDBCRealm.java:646)
        at org.apache.catalina.realm.JDBCRealm.authenticate(JDBCRealm.java:344)
        at org.apache.catalina.authenticator.BasicAuthenticator.authenticate(BasicAuthenticator.java:181)
        at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:446)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
        at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
        at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
        at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:825)
        at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:738)
        at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:526)
        at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
        at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
        at java.lang.Thread.run(Thread.java:534)The server.xml looks as follows:
<?xml version="1.0" encoding="UTF-8"?>



<Server port="8025" shutdown="SHUTDOWN">
    
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"/>
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"/>
    <Listener className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/>
    
    <GlobalNamingResources>
        
        <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
        
   
    </GlobalNamingResources>
    
    
    <Service name="Catalina">
        
        
        <Connector port="8084" maxThreads="150" minSpareThreads="25" maxSpareThreads="75" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" URIEncoding="utf-8"/>
        
        
        
        <Connector port="8443"
        maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
        enableLookups="false" disableUploadTimeout="true"
        acceptCount="100" scheme="https" secure="true"
        clientAuth="false" sslProtocol="TLS" />
        
        <Connector port="8009" enableLookups="false" redirectPort="8443" protocol="AJP/1.3"/>
        
        
        
        
        
        
        <Engine name="Catalina" defaultHost="localhost">
            
            
            
            
            
            
            
            
            <Realm className="org.apache.catalina.realm.JDBCRealm"
            driverName="org.gjt.mm.mysql.Driver"
            connectionURL="jdbc:mysql://localhost:3306/tomcatusers"
            connectionName="root" connectionPassword="sikhism1"
            userTable="users" userNameCol="user_name" userCredCol="user_pass"
            userRoleTable="user_roles" roleNameCol="role_name" />
            
            
            
            <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="false" xmlValidation="false" xmlNamespaceAware="false">
                
                
                
                
                
                
                
                
                
                
                
            </Host>
        </Engine>
    </Service>
</Server>Many thanks, and apologies for "dumping" all of the code here.

So looking through the java api docs, I found that the tcUtilJDBCOperations has a connect string for the database. Below is the info it outlines. The questions I have it this. How do you specify the psdriver and URL along with do I need to do this as a persistent instance then add my selectstatement as a part of this or can I just specify this and the select statement will use this connection? Any help you can give would be appreciated.
tcUtilJDBCOperations
public tcUtilJDBCOperations(java.lang.String psDriver,
java.lang.String psUrl,
java.lang.String psUsername,
java.lang.String psPassword)Contructor that sets the parameters for connecting to a database
Parameters:
psDriver - The class name of the jdbc driver
psUrl - The URL of the database
psUsername - The username required to access the database
psPassword - The password for the above username
Nick

Updating a biar file - database connection

Similar Messages

Maybe you are looking for