Problem in updating screen field.
Hi all,
We have a requirement to fill a blank screen field in table control in the screen by taking the value of one of the other fields in the same screen.I have used DYNP_VALUES_READ to read value from one screen field of the screen and DYNP_VALUES_UPDATE to update the read value in another screen field in table control of the same screen.I am able to read the value but unable to update value.
Flow logic.
Value in the Project # field should be updated in the Partner field column in the table control on selecting Sold-To-Party, option. I have created field exit for Sold-To-Party field and in the field exit function module I have written the code.
Thanks and regards
Kiran Vangalapati
It depends on how you have your table control set up. When you say that you are updating the table control field, are you updating the value of the field wherever the table control data is being pulled from (I.e. the original table)? Or are you updating the value in the internal table that is part of the table control definition (I.e. the field shown within the table control if you look at the screen layout)? Make sure that if you are changing the data in the original table that you then also update the actual table control fields as well. Also, are you making your changes in the PBO module before the screen is ever displayed? You may need to use a MODIFY SCREEN statement after you make your changes, depending on when your code is called. I hope this helps.
- April King
Similar Messages
-
How to update screen fields dynamically
Hi,
Can any one help me in updating screen field dynamically using so_expr, so_where,so_fldsHi,
Use this type of logic. Though this code is for selection-screen, but you can use this type of logic for screens by using screen table and implement this logic in PAI.
REPORT z_sdn.
PARAMETERS:
p_num RADIOBUTTON GROUP rad1 DEFAULT 'X' USER-COMMAND abc,
p_char RADIOBUTTON GROUP rad1.
PARAMETERS:
p_num1 TYPE i MODIF ID num,
p_num2 TYPE i MODIF ID num,
p_char1 TYPE c MODIF ID chr,
p_char2 TYPE c MODIF ID chr.
AT SELECTION-SCREEN OUTPUT.
IF p_num EQ 'X'.
LOOP AT SCREEN.
IF screen-group1 EQ 'CHR'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF screen-group1 EQ 'NUM'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
Regards
Abhijeet -
DYNP_VALUES_UPDATE not updating SCREEN FIELD PERNAM
Following code not working. screen field pernam not getting updated. pls advise.
tables:zmara ,DFIES.
PARAMETER: pmatnr LIKE zmara-matnr,
pernam like zmara-ernam.
AT SELECTION-SCREEN ON PMATNR.
perform p2.
FORM P2.
*****READ
DATA: SCREEN_VALUES TYPE TABLE OF DYNPREAD ,
SCREEN_VALUE LIKE LINE OF SCREEN_VALUES.
DATA: MATNR1 LIKE ZMARA-MATNR,
ERNAM1 LIKE ZMARA-ERNAM.
SCREEN_VALUE-FIELDNAME = 'PMATNR' . " Field to be read
APPEND SCREEN_VALUE TO SCREEN_VALUES. " Fill the table
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-CPROG
DYNUMB = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = SCREEN_VALUES.
read TABLE SCREEN_VALUES INDEX 1 INTO SCREEN_VALUE.
MATNR1 = SCREEN_VALUE-FIELDVALUE.
*OVERLAY MATNR1 WITH '000000000000000000'.
*SHIFT MATNR1 RIGHT DELETING TRAILING SPACE.
UNPACK MATNR1 TO MATNR1.
SELECT ERNAM FROM ZMARA INTO ERNAM1 WHERE MATNR = MATNR1.
ENDSELECT.
*message ERNAM1 TYPE 'I'.
**********UPDATE
CLEAR SCREEN_VALUES[].
CLEAR SCREEN_VALUE.
SCREEN_VALUE-FIELDNAME = 'PERNAM' . " Field to be read
SCREEN_VALUE-FIELDVALUE = ERNAM1.
APPEND SCREEN_VALUE TO SCREEN_VALUES. " Fill the table
CLEAR SCREEN_VALUE.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
DYNAME = sy-CPROG
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = SCREEN_VALUES.
loop at screen_values into screen_value.
message SCREEN_VALUE-FIELDVALUE TYPE 'I'.
ENDLOOP.
ENDFORM.
Moderator Message: Put a little more effort from your end. Did you check in Debugger?
Edited by: kishan P on Mar 30, 2011 12:21 PMHi Manfred,
Replace all the DYNP_VALUES_UPDATE-related content by the following statement:
SET USER-COMMAND 'xxx'.
While DYNP_VALUES_UPDATE does update the fields, a roundtrip is not triggered so the content of the fields will not be refreshed. The SET USER-COMMAND does that.
Hope this helps you!
Cheers, Roel -
Problem with Update Text fields in Infoset
Hi experts,
Here i would like to rephrase the question. Normaly while working with Infosets, when press "update text fields" button, those fields having text is updated. But one of my field is not updated. I need some help from you for that.
One more question i've that my field is having check table so i would like to know how exactly the text field is updated.
scenario.
Customized IT9320 has field prt_pos added. This field is having check table T528B. But i want text field to be attached is IT1000-STEXT.
How this can be done, because i suspect that just using check table field IT1000-STEXT is not attached to IT9320-prt_pos.
Please help. I'm really got stuck here.
Thanks a lot,
Toral.
Hi,
I'm working on customised Infotype. I need to add one new customised field ie Present Position. This field has number as well as text associated with it. There is a check table attached with this field so that text can be displayed alongwith number.
I need this field in SAP/Adhoc query. But when i go to SQ02 this fields shows only value. Text is disabled for this field. I'm not sure why is it so.
I looked into other infotype which as one field using same data element, and that field shows both value as well as text. Please help me to rectify this issue for present position field.
Thanks,
Toral.
Edited by: Toral Sheth on Jul 4, 2008 2:01 PMYou would be much better off with one multi-line form field.
There are many problems with trying to determine when one is at the end of the display field with text entry. -
Problem with numeric screen field....
hi,
I've gotta situation that,
In sales order we gotto determine WBS element(ps_psp_pnr) based on some conditions, if none of the condition is satisfied then the 'project definition'(prps-pspid) has to be concatenated with '.99' and displayed as WBS element.
Now the actual problem is, WBS element is of numeric character type whereas the projectdefinition(pspid)+.99 is of charcter type. So it throws me a dump. Even then, the screen field of WBS element doesnt shows any non numeric character and shows error message.
So how do i overcome this situation? Can anyone help me? Its quiet urgent.
Prompt answeres will be rewarded with points.
with regards,
praveen.Hi Praveen,
If you take SE16 and PRPS, you can see how SAP store it internally and show externally. In the first screen where it shows the line items, the WBS element value is the one stored internally and if you double click and see the WBS value in the next screen it is the one showed in the transaction screen.
For the conversion routine, even if the parameters are type less, you have to pass the variable with type.
For example
data: w_POSNR type PS_POSNR,
w_wbs(8).
w_wbs = '123.55'.
CALL FUNCTION 'CONVERSION_EXIT_ABPSP_INPUT'
EXPORTING
input = w_wbs
IMPORTING
OUTPUT = w_posnr
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Update screen field through function call
Hi All,
Is there a way to update a screen field Q0016-KONSSL through a function call?
Thanks,
~Mark.
-
Problem in Updating a field in corpNAB resource through workflows
Hi,
I am working in Sun Java system identity manager 7.1 version.
I have created one workflow which sends a list of Ids to a sub work flow,The sub workflow updates a field called user name in person document of corpNAB resource for each user.
Username consists set of values like fullname,certifier etc.
I am appendng each such values to a list and setting in the person document.
The order in which i am appending the values is not reflecting in the corpNAB person document field.
Please refer to the code and help me to solve.
Thanks in advance.
<append name='user.accounts[CorpNAB].FullName'>
<concat>
<ref>short_name</ref>
<s>/Corp/lexmark</s>
</concat>
<concat>
<ref>fullname</ref>
<s>/Corp/lexmark</s>
</concat>
<concat>
<ref>fullname</ref>
<ref>temp_cert</ref>
</concat>
<ref>short_name</ref>
<ref>fullname</ref>
</append>Hi..
Change ur Select statement as below .
<b>select knumv sum(kbetr)</b>
from konv
into table it_konv
for all entries in it_vbrk
where kschl = 'ZFQT'
and knumv = it_vbrk-knumv
<b>group by knumv .</b>
Here you need not to Retrieve the Field KSCHL since it is anyway given in the WHERE clause.
Let me know incase of any other issue.
<b>Reward if Helpful.</b> -
Problem with updating email fields thru ADRMAS idoc
Hi
I have a ABAP program which calls the function module to create a vendor -ERP_IDOC_INPUT_CREDITOR'.
During the creation of the vendor i can update the adress and telephone numbers but i cant input the email address .
To solve this i am calling the function module (BAPI_IDOC_INPUT1-function module used in ADRMAS idoc).
When i run the idoc it updates the field but when i call the Bapi in the abap program it does not update the data that i have entered in the function module .
I tried doing a BAPI_TRANSACTION_COMMIT but it still does not update it.
Any suggestions to solve it.
Also at the end of submitting the idoc it gives me a message
BAPI SAVEREPLICA has been called successfully
Is that what adrmas should be giving .
ThanksHi ,
Check your BAPI Returen Parameters, if it successfull then goto ADRC,ADR2,ADR6 tables and check your entry...
email address in ADR6 table -
Problem in updating table fields while enhancing screen fields using BDT
Hi all,
I have added some fields in REBE object using BDT. and also appended those fields in standard table(VIBDPR). But Data entered on those fields are not getting updated in table fileld..Can anyone Know the reson....?
Regards,
VijayHi,
I had the same problem. Here is an example code to resolve it:
REPORT ytestfg.
DATA: i_bsid LIKE bsid OCCURS 0,
i_bsid2 LIKE bsid OCCURS 0.
TABLES: bsid.
DATA: doc LIKE vbak-vbeln,
pos(6) TYPE n.
DATA e_fpla LIKE fpla.
DATA e_fplt LIKE fpltvb OCCURS 0 .
DATA: zfpla LIKE fplavb OCCURS 0,
zfplt LIKE fpltvb OCCURS 0.
DATA zfplt2 LIKE fpltvb OCCURS 0 WITH HEADER LINE.
doc = 'G03060619'.
pos = '000010'.
CALL FUNCTION 'SD_SALES_DOCUMENT_READ'
EXPORTING
document_number = doc.
CALL FUNCTION 'SD_SALES_BILLINGPLAN_READ'
EXPORTING
i_vbeln = doc
i_posnr = pos
IMPORTING
e_fpla = e_fpla
TABLES
e_fplt = e_fplt
EXCEPTIONS
no_billingplan_allowed = 1
no_billingplan_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Read the billing plan
CALL FUNCTION 'BILLING_SCHEDULE_READ'
EXPORTING
fplnr = e_fpla-fplnr
I_VFKDAT =
I_BFKDAT =
TABLES
zfpla = zfpla
zfplt = zfplt
Upddate the ZFPLT2 table with the new values
MOVE zfplt[] TO zfplt2[].
READ TABLE zfplt2 INDEX 1.
zfplt2-afdat = '20080927'.
Very important to set field updkz = 'U' ***
zfplt2-updkz = 'U'. "--> UPDATE!!
MODIFY zfplt2 INDEX 1.
CALL FUNCTION 'BILLING_SCHEDULE_SAVE'
TABLES
fpla_new = zfpla
fpla_old = zfpla
fplt_new = zfplt2 " --> NEW
fplt_old = zfplt.
CALL FUNCTION 'SD_SALES_DOCUMENT_SAVE'.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
Regards,
Edited by: PHO_BA on Mar 9, 2009 5:28 PM -
BLOBDestination. Problem in updating BLOB field
hi,
Im trying to customize BLOBDestination package to update a BLOB field. So I modified the method insertBLOB replacing the insert statement with this
stmtStr = "UPDATE " + " " + tab + " " + "SET "+ "'" blobCol "'=" + "'" + "empty_blob()" + "'"+ "WHERE " + "'"+keyCol+"'=" + "'" + key+ "'" ;
stmt.executeUpdate(stmtStr);
calling BLOBDestination from form I got this stmtStr:
UPDATE MYTABLE SET blob_field=empty_blob() WHERE col1 = 'val1' (copied from OC4J_BI_Forms log file)
but the execution returns this error:
REP-50125: blobdestination : exception: java.sql.SQLException: ORA-00933: SQL command not properly ended
I can affirm that the statement works if executed from TOAD or SQL*Plus
what's wrong?It depends on how you have your table control set up. When you say that you are updating the table control field, are you updating the value of the field wherever the table control data is being pulled from (I.e. the original table)? Or are you updating the value in the internal table that is part of the table control definition (I.e. the field shown within the table control if you look at the screen layout)? Make sure that if you are changing the data in the original table that you then also update the actual table control fields as well. Also, are you making your changes in the PBO module before the screen is ever displayed? You may need to use a MODIFY SCREEN statement after you make your changes, depending on when your code is called. I hope this helps.
- April King -
Fetch screen fields Line item wise
Hi All,
I have a requirement where i've to display some popup messages based on some conditions in MIGO transaction when POST button is clicked.
For that i have done certain changes in a BAdI IF_EX_MB_MIGO_BADI~POST_DOCUMENT .
But i require to read the screen field for G/L account ie GOITEM-KONTO of screen number 0345.
the G/L account can be accessed thru internal table IT_MSEG-SAKTO in the method, but the problem is the screen field has been left blank and when POST is clicked, by the time this BAdi is reached, the value is filled. And i need to add few codes only when the screen field has been left blank.
I found out FM - DYNP_VALUES_READ . But this reads only header screen data, so i'm unable to retrieve the line item wise G/L account screen values.
Please help.
Thanks,
AteetHi Petr,
I dont think u read the question properly.
The problem is the screen field has been left blank and when POST is clicked, by the time that BAdi is reached, the value is filled. And requirement is to execute some part of code only when the screen field for G/L account is left blank/not blank. I want screen field value , not the value which is in IT_MSEG.
While giving inputs in MIGO screen it is blank but by the time it reaches the BAdI where i've written the code its getting filled. I want the values from screen just before it gets filled.
I was hoping to find some FM like DYNP_VALUES_READ which fetches screen elements line item wise too.
I think i will have to try n search a different BAdI where i can get the screen values b4 updation.
Regards,
Ateet -
DYNP_VALUES_UPDATE does not change the value of my screen fields
Hi,
I have a screen with a header area and a control with an ALV.
In my header area i have 2 fields shown as an icon. These icons should change
with an event triggered in the ALV (in handle_user_command)
In handle_user_command I check the values of a column in my ALV - I have 3 possible cases : a green led, a yellow led or a red led.
When i'm debugging the program, everything seems to be ok. In my table i see the new values of the icons, but when I see the screen afterwards the old values have not been replaced. (I also use an refresh of my ALV)
Any help is welcome!
THx,
HelgaHi,
declare the internal table like below:
DATA: i_fieldvalues TYPE dynpread OCCURS 0 WITH HEADER LINE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR field.
PERFORM Display_contion_types.
FORM Display_contion_types.
Search help for Condition Type
PERFORM Display_contion_types.
Update screen fields like below:
Update Screen Field.
CLEAR i_fieldvalues[].
MOVE: 'V_TEXT' TO i_fieldvalues-fieldname .
WRITE i_t685-vtext TO i_fieldvalues-fieldvalue .
APPEND i_fieldvalues.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = sy-cprog
dynumb = sy-dynnr
TABLES
dynpfields = i_fieldvalues.
endif
regards,
Raja -
Selection screen fields order in report painter report..
hi experts,
i have a problem with selection screen fields order in report painter report.
Actually in report painter report selection screen order is different compare to report writer report selection screen.
how should i get the same selection screen fields order For Report painter report compare to Report Writer report ?
For example, Report Writer selection screen order is:
ledger:
company code:
period:
current fiscal year:
previous fiscal yer:
previous quarter end period:
where as Report Painter selection screen order is:
ledger:
previous fis year:
current fis year:
company code:
period:
previous quarter end period:
please help me regarding with this.
Thanks and Regards,
NAGARJUNA.hi nagarjun,
Go to Sq01, select the query and goto to change mode.go to the next screens till u reach Selection fields. Here u enter the NO field in the sequence which u want ot appear in the selection screen and it is done. Save and execute.
Ex:
Selection fields No
Exclude Cancelled Lots 5
Material number 1
Plant 2
Material type 3
Inspection Lot Origin 4
Regards,
Lokesh -
Adding New Screen Fields Through BDT
Hi All,
In BP transaction there is a concession tab. i want to add 2 new screen fields from z table.
i have added from z table in that concession tab.
But The problem is that screen fields are coming in the last line.but where as i need those all new fields in right corner of first and second lines of the existing fields .plz.. help me
Thanks Inadvance ,
Siva KumarHi Vishnu
I suggest to use EEWB for adding the new field. Follow the following steps
1. Run Transaction EEWB (Easy Enhancement Work Bench)
2. Create new Project.
3. Select the relevent Z package.
4. Create Customizing and Workbench Requests.
5. Select table BUPA
6. Select the type of field you require (single or table) and follow the wizard.
The new fields will appeare on a new tab "Customer Data" on BP Screen.
The Screen Name and Sequence can then be changed with VCT.
Precautions:
1. Your user must have developer's key privilages.
2. There should not be any users working on the system when you are doing this activity.
3. The workbench request created is client independent. The customization request created is client specific.
4. The process is reversable and does not get effected by patch upload.
hope this may help.
Cheers
Avi -
Screen Fields Not getting Updated with DYNP_VALUES_UPDATE
Hi All,
I am using FM DYNP_VALUES_READ to read the screen field values and then modifying those values and passing the modified table to DYNP_VALUES_UPDATE. But the problem is screen fields are not populated with these values . The values I wish to populate are footer values . I am using OO ALV for this wherein I am handling an event for filter of records and accordingly I need to modify my footer. Any Suggestions??
*& Form footer
Caslculate Total items, number of hits/Miss and percent MSP
--> p1 text
<-- p2 text
FORM footer .
CLEAR : io_totitems,
io_tothit,
io_totmiss,
io_permiss.
IF NOT l_flag EQ 1.
Get total items
DESCRIBE TABLE i_outdata LINES io_totitems.
LOOP AT i_outdata INTO wa_outdata.
calculate number of hits
IF wa_outdata-hit_miss = 'HIT'.
io_tothit = io_tothit + 1.
ENDIF.
calculate number of Miss
IF wa_outdata-hit_miss = 'MISS'.
io_totmiss = io_totmiss + 1.
ENDIF.
CLEAR wa_outdata.
ENDLOOP.
calculate percent MSP
io_permiss = ( ( io_totitems - io_totmiss ) / io_totitems ) * 100 .
IF l_flag EQ 1.
wa_dynpread-fieldname = 'IO_TOTITEMS'.
APPEND wa_dynpread TO t_dynpread.
wa_dynpread-fieldname = 'IO_TOTHIT'.
APPEND wa_dynpread TO t_dynpread.
wa_dynpread-fieldname = 'IO_TOTMISS'.
APPEND wa_dynpread TO t_dynpread.
wa_dynpread-fieldname = 'IO_PERMISS'.
APPEND wa_dynpread TO t_dynpread.
CLEAR wa_dynpread.
d020s-prog = sy-repid.
d020s-dnum = sy-dynnr.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = d020s-prog
dynumb = d020s-dnum
translate_to_upper = 'X'
REQUEST = ' '
TABLES
dynpfields = t_dynpread.
MOVE io_totitems TO io_totitem.
CONDENSE io_totitem NO-GAPS.
MOVE io_tothit TO io_tothits.
CONDENSE io_tothits NO-GAPS.
MOVE io_totmiss TO io_totmis.
CONDENSE io_totmis NO-GAPS.
MOVE io_permiss TO io_permis.
CONDENSE io_permis NO-GAPS.
LOOP AT t_dynpread INTO wa_dynpread.
CASE: wa_dynpread-fieldname.
WHEN 'IO_TOTITEMS'.
wa_dynpread-fieldvalue = io_totitem .
MODIFY t_dynpread FROM wa_dynpread.
WHEN 'IO_TOTHIT'.
wa_dynpread-fieldvalue = io_tothits.
MODIFY t_dynpread FROM wa_dynpread.
WHEN 'IO_TOTMISS'.
wa_dynpread-fieldvalue = io_totmis.
MODIFY t_dynpread FROM wa_dynpread.
WHEN 'IO_PERMISS'.
wa_dynpread-fieldvalue = io_permis .
MODIFY t_dynpread FROM wa_dynpread.
ENDCASE.
CLEAR wa_dynpread.
ENDLOOP.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = d020s-prog
dynumb = d020s-dnum
TABLES
dynpfields = t_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
Get all fotter details in a internal table
this is used to download footer in Excel
wa_footer-fldname = 'Total Items '.
wa_footer-value = io_totitems.
APPEND wa_footer TO i_footer.
wa_footer-fldname = 'Number of HIT'.
wa_footer-value = io_tothit.
APPEND wa_footer TO i_footer.
wa_footer-fldname = 'Number of MISS'.
wa_footer-value = io_totmiss.
APPEND wa_footer TO i_footer.
wa_footer-fldname = 'Percentage MISS '.
wa_footer-value = io_permiss.
APPEND wa_footer TO i_footer.
CLEAR wa_footer.
ENDFORM. " footerdata: t_dynfields1 type table of dynpread with header line.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = d020s-prog
dynumb = d020s-dnum
translate_to_upper = 'X'
REQUEST = ' '
TABLES
dynpfields = t_dynfields1.
<b>read table t_dynfields1 index 1</b> I hope this is missing
I will be selecting from a list .
Because once the value is read we need to update the screen field with that value .
Here the selected value will be in the first place
Now
Your operation is to populate the fields with some variables .
In the same when I do this there is only one value then
Im expecting only one entry here
LOOP AT t_dynpread INTO wa_dynpread.
CASE: wa_dynpread-fieldname.
WHEN 'IO_TOTITEMS'.
wa_dynpread-fieldvalue = io_totitem .
MODIFY t_dynpread FROM wa_dynpread.
WHEN 'IO_TOTHIT'.
wa_dynpread-fieldvalue = io_tothits.
MODIFY t_dynpread FROM wa_dynpread.
WHEN 'IO_TOTMISS'.
wa_dynpread-fieldvalue = io_totmis.
MODIFY t_dynpread FROM wa_dynpread.
WHEN 'IO_PERMISS'.
wa_dynpread-fieldvalue = io_permis .
MODIFY t_dynpread FROM wa_dynpread.
ENDCASE.
CLEAR wa_dynpread.
ENDLOOP. */
Comment this for a while and
Change the code as
t_dynfields1-fieldname = ' '. "<--- header name
t_dynfields1-fieldvalue = ' '."<----val
append t_dynfields1.
t_dynfields1-fieldname = ' '.
t_dynfields1-fieldvalue = ' '.
append t_dynfields1.
t_dynfields1-fieldname = ' '.
t_dynfields1-fieldvalue = ' '.
append t_dynfields1.
And check .
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = d020s-prog
dynumb = d020s-dnum
TABLES
dynpfields = t_dynfields1.
regards,
vijay
Maybe you are looking for
-
Itunes match is making itunes non responsive
Hi! Ive been looking into this issue on both the "itunes windows" and the "match" forums with no real luck. I updated my itunes, it is fully updated on all things i use. I left itunes back in Jan2013 because at that point only being able to add my de
-
Get rowns that don't exist in any of the tables.
Hi, I need to implement some views to compare systems. This views will compare tables with the same structure and I want to extract the rows that don't exist in any of the sides. I need to implement some views to compare only two tables, others to co
-
CCC and AMD graphics card failed after updating driver
I have an HP Pavilion dv6 6c-32eg laptop. I recently tried to update my GPU driver, as this was required to run a particular program (oclHashcat, if you're interested). I downloaded the installer from here, and ran it. It appeared to run fine, but a
-
Hi, Recently i came across a tricky interview question regarding spfile . I have a database where i have done changes using my spfile and later I have bounced the database. But while starting , it is throwing an error that it cant read the spfile. I
-
SCCM 2012 Client - missing client actions.
Hi, I am having an issue with a SCCM 2012 client where I am only seeing the actions: Machine Policy & Evaluation Cycle User Policy & Evaluation Cycle. I click on the Machine Policy Evaluation cycle and nothing happens. What log file should I be check