Problem in using Step into and Step Over button in Test Stand user interface development.

hi,
I am developing operator interface in VC++
currently I am facing a problem, I have created Teststand UI button controls dynamically on the dialog, I have assigned the buttons for break, Resume, Break all, Resume all, Step into and step over.
Break, Besume, Break all , Resume all buttons are working fine, the Step into and step over buttons are enabling if I break the execution, but after breaking the execution when I click the Step into button I expect that the current step will be executed and, breaks at the next statement, but when I click the Step Into button It is behaving like resume button, I mean the executioin is going on till the end of the sequence file, it is not breaking at the next statement,
Is my Step into button working the way it is supposed to be?, it is the same case with my step over button alsoI am connecting the TSUI button control to the execution view mgr in the CTestExecDlg:nDisplayExecutionApplicationMgr(LPDISPATCH exec, ExecutionDisplayReasons reason)
message funciton , and nothing I am doing nothing else, this is my code statement how I am connecting the button to the execution view manager.
mExecutionTab.m_pControlPtrArray[0].mExecutionViewMgr->ConnectCommand(mExecutionTab.MiscControls.m_StepInto,CommandKind_StepInto,0,CommandConnection_NoOptions);
mExecutionTab.m_pControlPtrArray[0].mExecutionViewMgr->ConnectCommand(mExecutionTab.MiscControls.m_StepOver,CommandKind_StepOver,0,CommandConnection_NoOptions);
Am I missing anything wrong? Can anyone please help me out.

Al B,
I'm not the original author of this post, but I have encountered a similar problem. My C# application has implemented the following "debug" buttons that work just fine: Run All, Pause, Continue, Stop. But my Step Over button causes the Sequence to run to completion. When the user clicks on the StepOver button, only one line is executed:
this.axExecutionViewMgr.Execution.StepOver();
but it behaves like its calling
this.axExecutionViewMgr.ResumeExecution();
Can you offer any insight into this issue?

Similar Messages

Use of reader and voice over functions

Want/need help using both "reader" and voice over functions. Thank you.

Hi there Joycexy,
You may find the information in the article below helpful.
OS X Mavericks: Use accessibility features
http://support.apple.com/kb/PH14322
-Griff W.

I am using iphone 4 and my home button repsonds slow

I am using iphone 4 and my home button repsonds slow

Hi Naveedfrombangalore.
You're almost definitely correct, this is a hardware issue. What to do about it?
1. If your phone is still under warranty, you could get it replaced at an Apple Store. Their warranty covers hardware issues such as this one. It is known to them that the home button can wear over time and become less responsive to touches. A Genius may try to remove some grease and gunk, if that doesn't work and your phone is under warranty... you get a new iPhone!
2. If your phone is not under warranty, you may decide you want to just live with the minor hardware issue. IF the day comes when you decide you cannot live with the issue, there is a little-known software work-around built into the iPhone called AssistiveTouch that simulates the clicking of the home button.
It i accessible by going to Settings --> General --> Accessibility --> AssistiveTouch --> On.
It's not ideal, but that could hold you over until you upgrade or replace your phone.

Hone turned off . i tried several times to turn it on but i doesnt work even by using the power and the home button. what should i do ?

ive got the iphone 5s 4 weeks ago.today the screen turned blue and the phone turned off . i tried several times to turn it on but i doesnt work even by using the power and the home button. what should i do ?

Hi vanessato,
Thanks for visiting Apple Support Communities.
I recommend these troubleshooting steps if your iPhone does not turn on.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy

I need an application that will turn off my iPhone on the home screen just by a one click since my power button has sank and is no longer working--anyone have ideas?? I don't like having to use assistive touch and hit three buttons to lock my screen

I need an application that will turn off my iPhone on the home screen just by a one click since my power button has sank and is no longer working--anyone have ideas?? I don't like having to use assistive touch and hit three buttons to lock my screen

No such app exisits or can exist. Apple doesn't allow 3rd party apps to access core functions of the phone. Time to get your phone replaced or repaired if assistive touch doesn't needs your needs.

Problem while using camera connetor and Sony DSC-M1

Dear all
My digital Camera Sony DSC-M1 is able to take pictures and take video into mpeg4 format .
this is the revirew of this camera
http://www.steves-digicams.com/2004_reviews/m1.html
However, I got a problem while using this camera with iPod +Camera connector.
When I plug this camera into camera connector , ipod will transfer all photo from the camera , but do nothing with the video.
I guess that problem is the video file is not inside the "/DCIM" folder
All video file ( *.mp4 ) are all in the folder named " /MP_ROOT/101MNV01/ "
Can anyone help me how to make this sync from camera to ipod automatically both photo and video ?
This problem also bother me while I am using iPhoto to transfer the file when I was home .
pls , help me , thanks a lot

Hi there, I'm having exactly the same problem. Have you found out how to do it?

My problem in using weblogic Datasource and proxy user

Hello
I create a DataSource in Weblogic that connect to the database by a proxy user and I have a client application that use this DataSource and create a proxy session , I've written my client application (it's a stand alone client application) code below :
public static void main(String [] args) {
OracleConnection conn=null;
javax.sql.DataSource ds=null;
Hashtable env = new Hashtable();
env.put( Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory" );
env.put(Context.PROVIDER_URL, "t3://127.0.0.1:7001");
try{
Context context=new InitialContext( env );
ds=(javax.sql.DataSource) context.lookup ("OracleConnection2");
conn=(OracleConnection) ds.getConnection();
java.util.Properties prop = new java.util.Properties();
prop.put(OracleConnection.PROXY_USER_NAME, "web_user1");
prop.put(OracleConnection.PROXY_USER_PASSWORD,"web_user1");
conn.openProxySession(OracleConnection.PROXYTYPE_USER_NAME, prop);
if (conn.isClosed()){
System.out.println("Connection closed");
return;
testJDBC(conn,true);
for(int k=0;k<10;k++){
testJDBC(conn,false);
conn.close(OracleConnection.PROXY_SESSION);
conn.close();
}catch(Exception ex){
ex.printStackTrace();
It works but my problem is that in line "prop.put(OracleConnection.PROXY_USER_PASSWORD,"web_user1")" or line "prop.put(OracleConnection.PROXY_USER_NAME, "web_user1");"
Let me to mention a scenario :
*1- I type a wrong username or password in my client application and I run the client application it shows me this error : invalid username/password*
*this error is acceptable*
*2- then I correct the wrong username or password immediately and run the application again , it shows me this error (at line conn.openProxySession(OracleConnection.PROXYTYPE_USER_NAME, prop)) :*
java.sql.SQLException: Closed Connection
     at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
     at weblogic.jdbc.rmi.internal.ConnectionImpl_weblogic_jdbc_wrapper_JTAConnection_weblogic_jdbc_wrapper_XAConnection_oracle_jdbc_driver_LogicalConnection_1032_WLStub.openProxySession(Unknown Source)
     at weblogic.jdbc.rmi.SerialConnection_weblogic_jdbc_rmi_internal_ConnectionImpl_weblogic_jdbc_wrapper_JTAConnection_weblogic_jdbc_wrapper_XAConnection_oracle_jdbc_driver_LogicalConnection_1032_WLStub.openProxySession(Unknown Source)
     at oracle.HRFacadeClient.main(HRFacadeClient.java:38)
*3- I run the application again (by correct username and password) but this time it shows me this error :*
java.sql.SQLException: Unsupported feature
     at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
     at weblogic.jdbc.rmi.internal.ConnectionImpl_weblogic_jdbc_wrapper_JTAConnection_weblogic_jdbc_wrapper_XAConnection_oracle_jdbc_driver_LogicalConnection_1032_WLStub.openProxySession(Unknown Source)
     at weblogic.jdbc.rmi.SerialConnection_weblogic_jdbc_rmi_internal_ConnectionImpl_weblogic_jdbc_wrapper_JTAConnection_weblogic_jdbc_wrapper_XAConnection_oracle_jdbc_driver_LogicalConnection_1032_WLStub.openProxySession(Unknown Source)
     at oracle.HRFacadeClient.main(HRFacadeClient.java:38)
*4 - if I repeat running the application for multi times every time it shows me the previous error*
*5- I wait about one minute the problem solved and my application can create proxy session *
the result is that if I wanna create proxy session by wrong username or password and I get "Invalid username/password" error message , then after correcting username or password I have to wait about one minute and then run the application again_
Do you know how I can overcome this problem ?
Thank you

Hi Jamshid,
There is same problem observed few days back with us, and we have used the below code, and it got solved. Actually there is a problem observed while using proxy connections on weblogic.
if(conn instanceof weblogic.jdbc.extensions.WLConnection){
     weblogic.jdbc.extensions.WLConnection cn=(weblogic.jdbc.extensions.WLConnection)conn;
     cn.clearStatementCache();
http://rocksolutions.wordpress.com/2010/06/04/connection-pool-issue-on-weblogic/
Hope this helps.
Thanks

Problem combining "use namespace mx_internal" and events

Hi,
I'm using the AutoSizingAdvancedDataGrid from WorkDay
(here)
. I need to extend it so that it dispatches a new event when it
creates the rows and columns.
However, putting [Event(name="heightChanged",
type="mx.events.Event")] after the import statements as normal does
not reveal the heightChanged event in the calling code as it
should. If I comment out the "use namespace mx_internal" line, then
the event is exposed, but obviously the compile fails because it
needs the namespace for the getHeaderInfo() (and other) functions.
Now, I have gotten around this problem by extending the
AutoSizingAdvancedDataGrid again to AutoSizingADG and overriding
the makeRowsAndColumns function, but I would like to know why the
original won't work, and if there's any other way to solve it?
Thanks for your help

quote:
Originally posted by:
peterent
SWF files that are assigned to the local-trusted sandbox can
interact with any other SWF files and can load data from anywhere
(remote or local). "
So how can we do this?
For example, I want to write a flex blog reader, which is
suppose to run locally, and packed it with an installer.
User run the installer and copy the swf to target directory,
but the target directory is not a development environment.
What can we do to deal with this?
The crossdomain.xml is absolutely absent from the blog sites,
at least, not 100% avaiable.
The flash player security is a good thing, but since the user
noticed the installation agreement, so it shouldn't be a major
concern as he/she should be noticed of the blog reader needed to
connect to internet.
Flex absolutely went through the sandbox locally, there
should be way.
The focus is, how can we do this?

Problem when using WEB.SHOW_DOCUMENT and passing in lexical parameter

Hi,
I got a blank page with error "An error has occured while trying to use this document" when I tried to use web.show_document and passing a lexical parameter to 10g report on 10gAS. The URL in the web.show_document is:
http://<srvname>:<portnum>/reports/rwservlet?server=repserver90&report=myrpt.rdf&destype=Cache&desformat=pdf&userid=<usr>/<pw>@<db>&where_clause=where%20product_type%20in%20('REPORT')
If I change the desformat to htmlcss, it is fine to display the report. But doesn't work with desformat=pdf. The pdf file has been generated in the cache. Why can't it display on the screen.
Also I tried to use double quote the value for where_clause. The pdf report showed up. But it ignored the where clause.
Experts please help.
Ying

I use lexical parameters and they work fine, but I use a parameter list. The code is contained in a form that is called by all forms that wish to run a report. This way you only need the logic for printing in a single form. If you want the form, email me at [email protected]

Facing problem while using apps world and games

Hi ,
i bought blackberry z3 1 week ago, when i want to download apps from blackberry world its show a message that " AN ERROR OCCURED WHILE PROCESSING YOUR REQUEST "
AND OTHER PROBLEM WHILE GOING TO GAMES APPS IT SHOWS THAT "AN ERROR OCCURED.PLEASE TRY AGAIN LATER( SC_HTTP_server_ERROR).
PLS HELP ME AS SOON AS POSSIBLE.
THANK YOU

Hi and Welcome to the Community!
First:
http://kathrynvercillo.hubpages.com/hub/What-People-Think-When-You-Type-in-All-Caps
Now, please try this process.
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to pop up
2) Reboot
Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt a harsher method by holding down the up/down volume keys together until the device has fully shut down.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem in using XSQL-session and connecting database

Hello
Let me explain clearly. We have some data entry screens for which we want to use session with time out option. Normally in Servlet, we use to create a session with max age option. Then everytime the browser call the servlet we use to check for session.isnew(). If it is new session then we will forward the page to Relogin (because session is timed out) or we proced with further action.
In XSQLServlet, how will do this. Do I have to create my own servlet extended from XSQLServlet ? Override the Service method and write about the session part and call
super(). Here only I am getting confused. In servlet mapping we have given for every .XSQL call run the XSQLServlet. How will I override this ?
And also we have problem with user id and password. We don't want to use the same id (system id as defined in XSQLConfig.xml) for every database connection. We want to define only the connection information like SID, Server, Port number. But user id and password should be dynamic. How can I achieve this ?
Please help us on solving these problem. Thanks.
Lakshmi
null

You'll need to implement your own classes that implement the:
oracle.xml.xsql.XSQLConnectionManagerFactory
and
oracle.xml.xsql.XSQLConnectionManager
to change the way XSQL handles connections. Using this mechanism, you should be able to implement any alternative connection scheme you choose.
If you run into problems implementing these interfaces, give us a shout here in the forum.

Problem with Using Spring IoC and Web Start

Greetings Everyone,
I have a small Swing app that runs using spring to load its dependencies. I can run it from a single signed jar file locally, and I setup my .jnlp file to try it with Web Start.
Unfortunately, I get the following:
java.security.AccessControlException: access denied (java.lang.RuntimePermission accessDeclaredMembers)
     at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323)
     at java.security.AccessController.checkPermission(AccessController.java:546)
     at java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
     at java.lang.SecurityManager.checkMemberAccess(SecurityManager.java:1662)
     at java.lang.Class.checkMemberAccess(Class.java:2157)
     at java.lang.Class.getDeclaredMethods(Class.java:1790)
     at org.springframework.util.ReflectionUtils.doWithMethods(ReflectionUtils.java:429)
     at org.springframework.util.ReflectionUtils.doWithMethods(ReflectionUtils.java:412)
     at org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor.findPersistenceMetadata(PersistenceAnnotationBeanPostProcessor.java:363)
     at org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor.postProcessMergedBeanDefinition(PersistenceAnnotationBeanPostProcessor.java:296)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyMergedBeanDefinitionPostProcessors(AbstractAutowireCapableBeanFactory.java:745)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:448)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
     at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
     at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:221)
     at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
     at org.springframework.context.support.AbstractApplicationContext.getBean(AbstractApplicationContext.java:881)
     at org.springframework.context.support.AbstractApplicationContext.registerBeanPostProcessors(AbstractApplicationContext.java:597)
     at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:366)
     at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:139)
     at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:83)
     at org.chibgrant.main.MainPOE.main(MainPOE.java:31)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.javaws.Launcher.executeApplication(Launcher.java:1321)
     at com.sun.javaws.Launcher.executeMainClass(Launcher.java:1267)
     at com.sun.javaws.Launcher.doLaunchApp(Launcher.java:1066)
     at com.sun.javaws.Launcher.run(Launcher.java:116)
     at java.lang.Thread.run(Thread.java:619)
I am running build 1.6.0_13-b03. Anyone run into this before?
Thanks for any insights...!

I suspect you may have solved this yourself by now, but in case not.
I've recently created a desktop application that uses Spring and is launched via Java Web Start and I did have a problem getting it to launch via Web Start until I modified my code to ensure the classloader setup is done before any Spring methods are called.
i.e.
    // This is needed for Java Web Start compatibility.
    UIManager.getLookAndFeelDefaults().put("ClassLoader", Loader.class.getClassLoader());In may application this code is invoked in the class that starts my application (Loader) before I load anything via Spring.
Cheers,
Stephen.

Problems consering use of Chromecast and my Linksys router together

Hi, I have a problem with my Linksys router type CL7B1K148596
Model no: WRTS54GL
Ver. 1.1
I want to use this routher together with my Chromecast wireless unit to stream from my net to my procector, is this router compatible with the Chromecast unit?

Yes. Use the link FurryNutz had provided you. Make sure that you choose the Hardware version to 1.1. You also need to check what's the current firmware version of your router. You may refer to this link on the steps of updating the router firmware: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=e9c2361ee7974d75913e61386a712188_4030.xml&pid=80&r...

Problem in using LIKE expression and mapping relationship: @OTM / @MTO???

Hi there,
I have 2 entity classes:
@Entity
@Table(name = "DT_KHV_DTL", schema = "DTKB", uniqueConstraints = {})
public class VoucherDtlEnt {
bq.      private String id; \\     private DuAnEnt duAnEnt; \\     //... others
bq.      @Id \\     @Column(name = "ID", unique = true, nullable = false, insertable = true, updatable = false)
bq. public String getId() {
bq. bq. return id;
bq.      } \\     public void setId(String _id) {
bq. bq. this.id = _id;
bq. }
bq.      @ManyToOne(targetEntity = DuAnEnt.class) \\     @JoinColumn(name = "DA_ID")
bq. public DuAnEnt getDuAnEnt() {
bq. bq. return this.duAnEnt;
bq.      } \\     public void setDuAnEnt(DuAnEnt _duAnEnt) {
bq. bq. this.duAnEnt = _duAnEnt;
bq. }
bq. //... others
@Entity
@Table(name = "DT_TTDA_C", schema = "DTKB", uniqueConstraints = {})
public class ProjectEnt {
bq. private String id; \\ //... others
bq.      @Id \\     @Column(name = "ID", unique = true, nullable = false, insertable = true, updatable = false)
bq. public String getId() {
bq. bq. return id;
bq.      } \\     public void setId(String _id) {
bq. bq. this.id = _id;
bq. } \\ //... others
bq.
I want to list details-vouchers which have project id like the search parameter. In SQL this will be: SELECT * FROM DT_KHV_DTL a WHERE a.DA_ID LIKE ?
I've tried in JPQL with this query:
bq. SELECT voucherDtlEnt FROM VoucherDtlEnt voucherDtlEnt WHERE voucherDtlEnt.projectEnt.id LIKE :projectId
Of course it's work but it make a big problem: it will generate a JOIN SQL query like that:
bq. SELECT t0.id ... FROM DT_KHV_DTL t0, DT_TTDA_C t1 WHERE t0.DA_ID = t1.ID AND t1.ID LIKE ?
In my real case, the project number is around 10.000, this generation take me from 0.1s in SQL to minutes in JPQL, even in complex situation, it freeze the application server.
In other case without LIKE, this will be done with:
bq. SELECT voucherDtlEnt FROM VoucherDtlEnt voucherDtlEnt WHERE voucherDtlEnt.projectEnt = :projectEnt
which perform a true SQL:
bq. SELECT t0.id ... FROM DT_KHV_DTL t0 WHERE t0.DA_ID = ?
So, I've tested:
bq. SELECT voucherDtlEnt FROM VoucherDtlEnt voucherDtlEnt WHERE voucherDtlEnt.projectEnt LIKE :projectEnt --> Error cause LIKE expression only apply for String type
bq. SELECT voucherDtlEnt FROM VoucherDtlEnt voucherDtlEnt WHERE voucherDtlEnt.projectEnt LIKE :projectId --> Error cause can't compare 2 dif class: ProjectEnt and String
Have any solution ???
+I'd happy if the generator don't check type String in
the query:+
bq. SELECT voucherDtlEnt FROM VoucherDtlEnt voucherDtlEnt WHERE voucherDtlEnt.projectEnt LIKE :projectEnt
instead just check inserted entity have an Id in String type, so can threat this like the '=' expression case.
bq.

After review, I've found the problem is not in JOIN but stupid generator do one like this:
SELECT t0.id ... FROM DT_KHV_DTL t0,{color:#ff0000} DT_KHV_DTL t2{color}, DT_TTDA_C t1 WHERE t0.DA_ID = t1.ID AND t1.ID LIKE ?
In SQL native query, cause t2 don't identify join column with t0, it will make a big problem that must remove this or just add AND t0.ID = t2.ID
I'm using Oracle Application Server 10.0.1.3 and have any fixed this in newer versions???
Still trying to REMOVE

JTree selection problem when using custom renderer and editor

Hello:
I created a JTree with custom renderer and editor.
The customization makes JCheckBox to be the component
responsible for editing and rendering.
The problem is that when I click on the node with the checkbox
the JTree selection model does not get updated.
Without customizations of the editor and renderer the MouseEvent would be fired and BasicTreeUI$MouseHandler.mousePressed() method would call
the selectPathForEvent() method which would be responsible for updating
the selection model. At the same time if I attach a mouse listener to the JTree (customized) I see the events when clicking on the nodes. It seems like the MouseEvent gets lost and somehow as a result of which the selection model does not get updated.
Am I missing something?
Thanks
Alexander

You probably forgot to call super.getTreeCellRendererComponent(...) at the beginning of your getTreeCellRendererComponent(...) method in your custom renderer.
Or maybe in the getTreeCellEditorComponent(...) of the TreeCellEditor...

Problem in using Step into and Step Over button in Test Stand user interface development.

Similar Messages

Maybe you are looking for