Problem installing discoverer applet
Hi All,
The applet for discoverer gets installed on some clients without any problem but on most of other clients it just refuses to do that. Sometimes it throws NullPointerException error and sometimes it just don't say anything. Is there any exe to manually install the applet on a client or is there some better solution for this problem??
Thanks a lot, BS
Hi
We also get an error as follows
oracle.disco.DiscoApplet cant instantiated
Please help us to solve this problem.
Also we get an error called Microsoft JVM should be updated.
Yours,
Sankar.B
Similar Messages
-
Possible problem installing kdeplasma-applets-plasma-nm
When doing pacman -Syu kdeplasma-applets-plasma-nm for the new kde network management package does anyone have any problem installing it? I installed the first released version a few days back which could be installed in parallel with the old kdeplasma-applets-networkmanagement package which was fine, and then once installed the original package could then be removed. However the new version of kdeplasma-applets-plasma-nm (0.9.3.0-2 -> 0.9.3.1-1) now has the same filenames as the original old package and there may be filename conflicts during install.
Does anyone know the best way to install the new package (0.9.3.1-1) on a system where the first version (0.9.3.0-2) was not yet installed?
Last edited by mcloaked (2013-10-15 20:09:19)OK so I guess that the following three commands in sequence should work fine - but I do wonder if a note to the effect would be worth as an announcement?
pacman -Syu
pacman -R kdeplasma-applets-networkmanagement
pacman -S kdeplasma-applets-plasma-nm
Otherwise if trying an install on its own leads to:
pacman -Syu kdeplasma-applets-plasma-nm
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Packages (3): libmm-qt-0.5.1-1 libnm-qt-0.9.0.1-1 kdeplasma-applets-plasma-nm-0.9.3.1-1
Total Download Size: 1.20 MiB
Total Installed Size: 5.62 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages ...
libmm-qt-0.5.1-1-x86_64 98.9 KiB 1163K/s 00:00 [###########################################] 100%
libnm-qt-0.9.0.1-1-x86_64 417.3 KiB 1128K/s 00:00 [###########################################] 100%
kdeplasma-applets-plasma-nm-0.9.3.1-1-x86_64 712.4 KiB 1103K/s 00:01 [###########################################] 100%
(3/3) checking keys in keyring [###########################################] 100%
(3/3) checking package integrity [###########################################] 100%
(3/3) loading package files [###########################################] 100%
(3/3) checking for file conflicts [###########################################] 100%
error: failed to commit transaction (conflicting files)
kdeplasma-applets-plasma-nm: /usr/lib/kde4/kded_networkmanagement.so exists in filesystem
kdeplasma-applets-plasma-nm: /usr/share/apps/networkmanagement/networkmanagement.notifyrc exists in filesystem
kdeplasma-applets-plasma-nm: /usr/share/icons/oxygen/32x32/devices/network-defaultroute.png exists in filesystem
kdeplasma-applets-plasma-nm: /usr/share/kde4/services/kded/networkmanagement.desktop exists in filesystem
kdeplasma-applets-plasma-nm: /usr/share/kde4/services/plasma-applet-networkmanagement.desktop exists in filesystem
Errors occurred, no packages were upgraded.
which is clearly not desirable! -
Problems Installing Discoverer Plus
I am trying to setup Discoverer Plus, but I am having all kinds of problems. I'm looking for the right forum to help with my problems. Here is what I am doing:
1. Installed an Oracle 11.2.0 database. This is OK.
2. Installed WebLogic 10.3.5.0 - Was able to connect to the Admin Server on Port 7001
3. Tried installed Application Server, the Discoverer portion. For some reason it wouldn't create the user accounts.
4. Removed all AS homes and created a Discoverer Account using RCU. It would not create the Portal account.
5. Now when I try to install AS it can't write to the ~rcu directories because of permissions.
I have uninstalled Weblogic, removing the Middleware home , and cleaning up accounts in the database.
I will then install WebLogic again. But I am not sure how to proceed afterwards.
Thanks and if this is the wrong forum, please point to the correct one.
JohnPl provide OS and Discoverer versions. Are you following the steps in the Install Guide ? http://download.oracle.com/docs/cd/E17904_01/install.1111/e10421/toc.htm
HTH
Srini -
Hello. Having a little problem installing my applet. The package loads cleanly, but when I try to install the applet it blows up and returns an OP.error.E6.6A86. I looked this up and found out that it means SW_INCORRECT_P1P2. After looking at my code for the longest time, I can't figure out why this error would be thrown. I throw the error in my process method, but can't understand where it would come from in the install or constructor. Any help figuring this out is greatly appreciated. Thanks. Justin
My code:
package test.justin2;
import javacard.framework.*;
public class UserInformationApplet extends javacard.framework.Applet
   private byte[] userID = {(byte)0x44,(byte)0x45,(byte)0x46,(byte)0x41,(byte)0x55,(byte)0x4C,(byte)0x54};
   private byte[] userType = {(byte)0x45,(byte)0x4D,(byte)0x50};
   private byte[] password = {(byte)0x50,(byte)0x41,(byte)0x53,(byte)0x53,(byte)0x57,(byte)0x4F,(byte)0x52,(byte)0x44};
    private final static short USER_ID = 0;
    private final static short USER_TYPE = 1;
    private final static short PASSWORD = 2;
   
    public UserInformationApplet(byte[] bArray, short bOffset, byte bLength)
    {
       super();
       register();
    }
    private void getField(APDU apdu)
    {
       byte[] buffer = apdu.getBuffer();
       if(buffer[ISO7816.OFFSET_P1] == (byte) USER_ID)
       {
          short le = apdu.setOutgoing();
          apdu.sendBytesLong(userID, (short) 0, (short) userID.length);
       }
       else if(buffer[ISO7816.OFFSET_P1] == (byte) USER_TYPE)
       {
          short le = apdu.setOutgoing();
          apdu.sendBytesLong(userType, (short) 0, (short) userType.length);
       }
       else
       {
          short le = apdu.setOutgoing();
          apdu.sendBytesLong(password, (short) 0, (short) password.length);
       }
    }
    public static void install(byte[] bArray, short bOffset, byte bLength) throws ISOException
    {
       UserInformationApplet me = new UserInformationApplet(bArray, bOffset, (byte)bLength);
       me.register();
    }
    public void process(APDU apdu) throws ISOException
    {
       byte[] buffer = apdu.getBuffer();
       if(buffer[ISO7816.OFFSET_CLA] != (byte) 0x80)
          ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
       if ((buffer[ISO7816.OFFSET_INS] != (byte) 0x02) & (buffer[ISO7816.OFFSET_INS] != (byte) 0x03))
          ISOException.throwIt(ISO7816.SW_DATA_INVALID);
       if ((buffer[ISO7816.OFFSET_P1] != (byte) USER_ID) & (buffer[ISO7816.OFFSET_P1] != (byte) USER_TYPE) & (buffer[ISO7816.OFFSET_P1] != (byte) PASSWORD))
          ISOException.throwIt(ISO7816.SW_INCORRECT_P1P2);
       if(buffer[ISO7816.OFFSET_INS] == (byte) 0x02)
       {
          getField(apdu);
       }
       else if(buffer[ISO7816.OFFSET_INS] == (byte) 0x03)
       {
          setField(apdu);
       }
       else
       {
          ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED);
       }
    }
    private void setField(APDU apdu)
    {
       byte[] buffer = apdu.getBuffer();
       short lc = (short) ((short) 0x00FF & buffer[4]);
       if(buffer[ISO7816.OFFSET_P1] == USER_ID)
       {
          userID = new byte[lc];
          Util.arrayCopy(buffer, (short) 5, userID, (short) 0, lc);
       }
       else if(buffer[ISO7816.OFFSET_P1] == USER_TYPE)
       {
          userType = new byte[lc];
          Util.arrayCopy(buffer, (short) 5, userType, (short) 0, lc);
       }
       else
       {
          password = new byte[lc];
          Util.arrayCopy(buffer, (short) 5, password, (short) 0, lc);
       }
       apdu.setOutgoingAndSend((short) 0, (short) 0);
    }Thanks for the help. I tried sending the 0C to make the applet selectable and then received a 0x6A81, SW_FUNC_NOT_SUPPORTED. I didn't have the select or deselect methods in my applet, so I added those also and then received the same error. So what I currently have is the previous code plus this:
   public boolean select()
   {
      return true;
   }
   public void deselect()
   {
      return;
   }
I can't help but think it's got to be some little thing, because it looks fine to me. I greatly appreciate the help. Justin. -
I cannot install Discoverer, problem of the OraHome
Hi
I have problem with instalation of the discoverer 3.1 or 3i.
I have instaled the database Oracle8i on default OraHome with name 'OraHome81' and I use more than one OraHome. One for WebDB with name 'OraHomeWDB' and one for OAS 4.0 with name 'OraHomeAS'
I want to install Discoverer on the same maschine but when I create another one OraHome for example with name 'OraHomeDV' it says that Discoverer do not support the nultiple instalation and therfore it cannot be instaled on orahome 'OraHomeDV'. It can be only instaled on orahome 'OraHome81'.
When I install the Discoverer to orahome 'OraHome81' it says that this place "d:\...\orahome81" is stil as orahome for 'Oracle 816 Production' and it cannot be used for orahome for 'nt'
Does anybody know how can I install Discoverer?
nullLook at the note below
PURPOSE
This document describes how to install Discoverer 3.1 for Windows or Discoverer
3i server on machines where Oracle 8i, or another product installed using the
Oracle Universal Installer already exists.
Installing Discoverer when Oracle 8i already installed.
If you try and install Discoverer (either Discoverer 3.1 for Windows or Discoverer
3i Application Server) on a machine where Oracle 8i (or some other product which
uses the Oracle Universal Installer) already exists you will see the following
error message or something similar:
"Discoverer User Edition does not support multiple installations, and therefore
cannot be installed on 'Default_Home'. It can only be installed on 'OraHome8i'.
In order to install Discoverer User Edition, please run Oracle Installer again,
and select 'OraHome8i'as the target location.",
where Default_Home is the name of the standard Oracle home and OraHome8i is the
name of the Oracle Home for Oracle 8i.
If you do as the message says, you then get the error, or something similar:
"The location specified, 'd:\oracle8i', is already used as an Oracle home for
'Oracle 816 Production'. It cannot be used as an Oracle home for 'nt'."
where d:\oracle8i is the directory of OraHome8i.
You need to install Discoverer in a non-8i home; so in the example above, in the
Oracle Home in the Orant directory rather than in the one in the oracle8i directory.
The problem is that in the registry, the value for the Default_home key has been
set to the Oracle 8i home. You need to change this to point to the standard
Oracle home. Back-up your registry before editing it.
- Run REGEDT32.EXE or REGEDIT.EXE from the command prompt to open the registry and
edit it.
- Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ALL_HOMES and change the value
of DEFAULT_HOME from OraHome8i to Default_Home (or whatever is appropriate in
your situation).
- From the 'Oracle for Windows NT' program group, run the Oracle Home Selector
and select Default_Home. The Oracle Home Selector just makes this home appear
first in your path environment variable.
You shouldn't run into this problem if you create the Default_Home before the one
for Oracle 8i. But if Oracle 8i is already installed, you might find it best to
de-install all Oracle products, delete the registry entries and then re-install, but
create the Default_Home first.
Hope this helps
Sreeram -
Problem while installing discoverer desktop edition
HI
I find few error messages while installing discoverer desktop edition..
When i give oracle home as
name:OracleHome92
Location: DiscovererDesk
it gives me a error
" oracle discoverer doesnot support multiple installations thus it cannot be installed on oracleHome92.It can only be installed on 'OraHome92'"
When i give oracle home as
name:OraHome92
It automatically takes my 9i oracle home path i.e E:\oracle\ora92 and gives me a error like
"The location specified 'E:\Oracle\ora92', is already used an oracle home for an
'Oracle 82 beta'.It cann't be used as an oracle home for nt."
I have oracle 9i and form6i,report 6i installed in my system.
Please suggest me ..
Regards,
SatyaHi
The easiest way to get a fully working TNSNAMES in a version 4 environment is to use the Net 8 Configuration utility.
Here's a workflow:
1. From the Start button, select Start | Oracle for Windows NT | Oracle Net8 Easy Config
2. When it starts, check Add New Service and in the little box to the right type the name by which you want this connection to be known
3. Click the Next button
4. Select TCP/IP (Internet Protocol) and click the Next button
5. Enter the fully qualified domain name or IP address of the server that contains the database
6. In Port, enter the port number - it defaults to 1521
7. Click the Next button
8.In Database SID enter the name of the database, then click the Next button
9.Click the Test Service button
10. Provide a username and password for an account on the database, then click the Test button
11. If you see: Connecting.... The test did not succeed you got the username/password combination wrong or some other part of the setup
12. When you see: Connecting.... The connection test was successful click the Done button
13. Click the Next button
14. Click the Finish button
You should now have a valid TNSNAMES connection for use by Discoverer 4
Best wishes
Michael -
Problem Installing the loaded applet in Samsung java card (S3CC9P9).
Hi all,
Am trying to install the applets already loaded into the Samsung java card(S3CC9P9), because am unable to select the applet which are loaded into the card. I got to know that the applets are only loaded, they are not installed in the card, without installing the applet ,we cannot select the applet. Am using gpj(version 20120310 ) to install the applets into the card.
When i execute : java -jar gpj.jar -list
i get the list of applets in the card as :
AID: A0 00 00 00 03 00 00 00 |........| ISD LC: 1 PR: 0x1A
AID: A0 00 00 00 03 10 |......| Exe LC: 1 PR: 0x00
AID: D4 10 65 09 90 00 10 00 |..e.....| Exe LC: 1 PR: 0x00
AID: 31 50 41 59 2E |1PAY.| Exe LC: 1 PR: 0x00
AID: D4 10 65 09 90 00 30 00 |..e...0.| Exe LC: 1 PR: 0x00
AID: D4 10 65 09 90 00 20 00 |..e... .| Exe LC: 1 PR: 0x00
Here am able to select only the first applet i.e., A0 00 00 00 03 00 00 00
SO, when i try to install the other applets, for example A0 00 00 00 03 10, its fails.
When i execute : java -jar gpj.jar -install -applet A00000000310
i get :
Found terminals: [PC/SC terminal ACS ACR38U 00 00]
Found card in terminal: ACS ACR38U 00 00
ATR: 3B 69 00 00 80 63 31 46 DF 83 FF 90 00
DEBUG: Command APDU: 00 A4 04 00 07 A0 00 00 01 51 00 00
DEBUG: Response APDU: 6A 82
Failed to select Security Domain GP211 A0 00 00 01 51 00 00 , SW: 6A 82
DEBUG: Command APDU: 00 A4 04 00 08 A0 00 00 00 18 43 4D 00
DEBUG: Response APDU: 6A 82
Failed to select Security Domain GemaltoXpressPro A0 00 00 00 18 43 4D 00 , SW: 6A 82
DEBUG: Command APDU: 00 A4 04 00 08 A0 00 00 00 03 00 00 00
DEBUG: Response APDU: 6F 19 84 08 A0 00 00 00 03 00 00 00 A5 0D 9F 6E 06 10 01 76 DE 00 05 9F 65 01 7F 90 00
Successfully selected Security Domain OP201a A0 00 00 00 03 00 00 00
DEBUG: Command APDU: 80 50 00 00 08 AE 2A B8 CE 3A BB E0 B0
DEBUG: Response APDU: 00 00 61 41 01 09 38 2F 09 5A FF 01 3F D9 93 D9 FE 9A FA 3B E4 B7 21 89 6A 34 AB 18 90 00
DEBUG: Command APDU: 84 82 00 00 10 A2 63 07 96 0B D8 A3 A9 93 A2 5C 7C 6D B7 E0 54
DEBUG: Response APDU: 90 00
DEBUG: Command APDU: 84 82 00 00 08 A2 63 07 96 0B D8 A3 A9
DEBUG: Response APDU: 90 00
java.lang.NullPointerException
at net.sourceforge.gpj.cardservices.GlobalPlatformService.installAndMakeSelecatable(Unknown Source)
at net.sourceforge.gpj.cardservices.GlobalPlatformService.main(Unknown Source)
Can anyone please tell me where am wrong and how to make the applets selectable.
Thanks in advancehy
1. do you have a reader with a serial (com1) connection?
if so, the reader has to be connected before starting windows. so windows recognizes it.
2. have a look to the control panel. is there a tool - installed during driver installation - to test and configure the reader?
if so try it.
if all that works, the jcop tools communicate with the reader over the installed driver.
snoopy -
Report service is not working after install Discoverer..............
Hello,
I have installed Oracle Developer Suite 10gR2 (Forms/Reports) on my desktop, they were both working fine for a long time. I installed Discoverer 10gR2 (Administrator and Desktop) on the same machine recently. The Oracle Forms is still good, I can run forms on the local machine after I start OC4J instance. But the Reports is always hanging, even Showjobs. I can access http://host:port/reports/rwservlet, but anything under that is not working, hanging.......
Please help! Thanks in advance.Hello,
The problem may be a PATH problem.
Start the reports server after having set the PATH :
set ORACLE_HOME=d:\oracle\ods1012
set PATH=%ORACLE_HOME%\jdk\jre\bin\classic;%ORACLE_HOME%\jdk\jre\bin;%ORACLE_HOME%\jdk\jre\bin\client;%ORACLE_HOME%\jlib;%ORACLE_HOME%\bin;%ORACLE_HOME%\jdk\bin;%ORACLE_HOME%\jre\1.4.2\bin\client;%ORACLE_HOME%\jre\1.4.2\bin;
Regards -
Hi,
i have the same problem?
Trying to log in with my user id and password at iocbc but was not able to access.
Problem message shown : Applet not initialised or may not be supported. Please refresh the page or check the browser setting
Anyone can advise?You need to install Java for your Mac OS version, and/or make sure it's enabled in the Java Preferences application and your browser's preferences.
-
Directory selection for Discoverer applet on HTTP Server
Hi
I installed Discoverer 3i on NT SP4
My http server is OAS 4.0.8.1
I tried single machine install and while providing the directory for Discoverer applet on HTTP Server i gave a directory which is not root directory for OAS
How do i set virtual path so that discoverer may be configured in my http server (OAS)
What are the steps?
Thanks
nullGo to the Directories section in OAS. You will already have virtual directories set for OAS. Use one of these as an example.
Regards,
Oracle Discoverer Team http://technet.us.oracoe.com -
Trying to install Discoverer 3.1.36.06
on the same machine wich hosts Ora817 enterprise ed. and Oracle Reports.
It refuses to install, says it do doesnt support multiple homes ? and must be isntalled in my ora81 home dir, wich of course also fails, since its allready a home for ora817 and sunch cannot be used for a home for 'nt' ...
What to do ? (besides to run on another machine.. im trying to evaluate this product..)Search the forum for the topic "I cannot install Discoverer, problem of the OraHome" and you should find the solution to your problem. There are also other postings concerning this issue. good luck.
-
Install Discoverer 4i on HP Unix
Folks,
I want to install Discoverer on the middle tier. Middle tier server is HP Unix.
Could anyone help me with documents/steps for installing Discoverer 4i on unix??
I had installed normal Discoverer Adminstrator and Desktop on windows pc(my desktop).
Regards,
Cherrish Vaidiyan
[email protected]The bin file should have the JDK with it. The zip file is the one that says that
you need the JDK1.3.x to install.. The problem was that the tmp space on the
Unix machine was to small. When using the information supplied in the install
about creating the extra tmp space seemed to make the install hang. Today I had
the Unix guy increase the default tmp space and the install ran fine. So something
about using that tmp method was not working for me.
Michael Young <[email protected]> wrote:
Hi.
Try installing JDK 1.3.x and rerun the install with this JDK in your
path.
Regards,
Michael
Kim Harmon wrote:
I am having a problem getting 610 to install on a Unix system. I amrunning
the .bin install file. I have Java 1.2.2 installed on the Unix machine.
running the sh -x weblogic.bin -i console command starts to unloadinto the
tmp directory. Then when the install tries to run a command java -version
it hangs. It seems like it is some kind of path problem or inabilityto get
to some library files that it needs to run the java program from theinstall
directory. Anyone have this problem? I was able to install it underwindows
2000 using the same JDK as I have installed on the Unix machine.
thanks.--
Michael Young
Developer Relations Engineer
BEA Support -
How to install an applet on a Security Domain
Dear all,
I have installed a new SD on my card but I cant install my applet on it! I dont know what is the problem and I havent found any related reference! I was wondering that maybe I am doing sth wrong with my SD and applet installation, here is what I have done:
1.Select ISD
2.Authenticate with ISD keys
3.Install a new instance of ISD with Security Domain privilege
4.Select new SD
5.Authenticate with default keys
6.Put key command
7.Authenticate with new keys
8.install for load my applet ----> (6A86) failed!
Thanks for your helps!that means associating an application (applet instance) with another security domain than the ISD.
an SSD is basically a keystore application, even if its aid can be selected to open a secure channel with the keys it contains.
The main use is to make GPSystem.getSecureChannel() refer to the other (SSD) keys. This way, a card owner can install an applet and delegate secure channel services to the SSD, using dedicated keys.
You can also open a secure channel with the SSD (using its own keys) and use INSTALL FOR PERSONNALIZATION / STORE DATA.
this way you don't have to give the ISD keys to a applet provider for him to be able to personnalize its own applet.
the owner of the ISD keys manages the card contents (install for install / delete) and the applet provider manages the personnalization.
Note that normal SSD are able to manage channels, but generally are not allowed to load/install/delete applets.
DAP requires the applet owner to sign its CAP file and to verify the signature on the card. the card manager loads the cap, the signature ensures the CAP file provided by the applet provider was not tampered.
with DM, the applet provider runs the card management commands, but the card requires these commands to be signed by the card manager. The card manager can choose which commands are allowed. -
10.6.8 update combined - problems installing
Hi all,
Currently having huge problems installing this update on my mac, have been trying for a couple of days now to get this machine back up and running again after I was told by the genius bar 2 years ago that after them spending nearly 900 pounds on new parts, that they "had no idea what the problem was, but could be something to do with the logic board". I finally decided to sell it, but as a parts and repair it will get £100 and fully working it could get a bit more, so it's in my interest to get it up and running again.
I am by no means a computer expert, but I know a few things and can normally sort problems out by just simply using search, but alas I have finally been beaten, and have come here to ask for some assistance.
After re-installing my macbook pro 3,1 (mid 2007) with it's original 10.4 tiger software probably 5 times before it worked, then moving on to 10.6 snow leopard which also took a couple of attempts, I am now completely stuck with no way to get this machine up to 10.6.8, so that I can make the jump to mountain lion. The software update program is either an absolute heap of dung, or my computer just won't have any of it. I have tried multiple solutions which I will list below:
Using software update to install the 10.6.8 combined update - Failed
Downloading the 10.6.8 combined update from apple support downloads - Failed
Deleting the library/preferencecom.apple.softwareupdate etc. files - Still software update Failed
Downloading 10.6.1 update and installing - Success after a few attempts
Downloading 10.6.8 combined and trying again - Failed
Downloading 10.6.2 update and installing - Failed
Now this is where I am at. I have downloaded these files both on the macbook pro itself, and on my windows laptop - then transfering them across. I have never been more frustrated at a computer in my entire life, and am about 20 minutes away from throwing this laptop out of the window onto a poor bystander below. If anyone has any solution - (and don't say reformat and reinstall the OS - I've already tried that), then it would be greatly appreciated!
I'll post the console message from my last install of just the 10.6.8 combined upate (without using software update) and if someone on here who can make sense of these messages can see a problem or offer a solution, then that would also be greatly appreciated, thanks!
Console message after attempted install:
06/03/2013 13:53:17 com.apple.ocspd[185] dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
06/03/2013 13:53:25 Installer[182] <ZeroSliderSplitView: 0x106dc2c70>: the delegate <TargetSelectPage: 0x106d6d9a0> was sent -splitView:resizeSubviewsWithOldSize: and left the subview frames in an inconsistent state:
06/03/2013 13:53:25 Installer[182] Split view bounds: {{0, 0}, {402, 104}}
06/03/2013 13:53:25 Installer[182] Subview frame: {{0, 0}, {0, 32}}
06/03/2013 13:53:25 Installer[182] Subview frame: {{0, 0}, {402, 104}}
06/03/2013 13:53:25 Installer[182] The outer edges of the subview frames are supposed to line up with the split view's bounds' edges. NSSplitView is working around the problem, perhaps at the cost of more redrawing. (This message is only logged once per NSSplitView.)
06/03/2013 13:53:27 [0x0-0x17017].com.apple.installer[182] dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
06/03/2013 13:53:37 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Console"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.dashboardlauncher"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.frontrowlauncher"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.exposelauncher"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.QuickTimePlayerX"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.spaceslauncher"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.appstore"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.backup.launcher"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.BluetoothFileExchange"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.PodcastCapture"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.keychainaccess"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.PhotoBooth"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.VoiceOverUtility"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Safari"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Safari"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.remoteinstallmacosx"></bundle>
06/03/2013 13:53:38 com.apple.installd[198] dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
06/03/2013 13:53:50 com.apple.coreservicesd[50] dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.dashboardlauncher"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.frontrowlauncher"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.exposelauncher"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.QuickTimePlayerX"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.spaceslauncher"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.appstore"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.backup.launcher"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.BluetoothFileExchange"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.PodcastCapture"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.keychainaccess"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.PhotoBooth"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.VoiceOverUtility"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Safari"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Safari"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Console"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.remoteinstallmacosx"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
06/03/2013 13:53:57 Installer[182] The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.There really shouldn't be any problem downloading that combo update unless you've got a very slow or flaky connection. And Windows doesn't play as well with Mac files as the Mac does with Windows files; who knows what Windows might have done to the update's file integrity.
You might also try downloading the file using another browser such as Firefox. And when you have the updater, reboot into Safe Mode and then run the updater. That way you can be sure there isn't third party software somehow interfering with the update while it's tinkering with the guts of OS X. -
Problems installing Adobe Air and BBC iPlayer Desktop
Problems installing Adobe Air and BBC iPlayer Desktop
I'm running Windows 7 32 bit on an ASUS netbook with 2mb ram. I installed both Air 3.7 and BBC iPlayer Desktop using Google Chrome. I downloaded 3 BBC programmes. Two ran fine but the third wouldn't start and I kept getting a message to try again later. I deleted this programme and downloaded it again, with the same result.
So I uninstalled both Air and the BBC iPlayer Desktop, the Air exe file and the two folders at the following locations:
C:\Users\USERNAME\AppData\Roaming\Adobe\AIR\ and
C:\Users\USERNAME\AppData\Roaming\BBCiPlayerDesktop.xxx
Since doing this each time I try to install Air either on its own or with the BBC iPlayer software I get the message part way through installation:
"Sorry, an error has occurred.
An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator."
I have run the Microsoft Fix it programme and still get the same result.
I have tried everything on your Trouble Shooting page apart from the bit about the elevated command prompt, but as I'm the sole user and administrator, that seems unnecessary.
I have closed Chrome and tried installation using Windows Explorer but with the same result.
I have tried all the above with Microsoft Security Essentials running and disabled. And I have tried the same with Astrill on and off.
I have had a response from the BBC with much the same advice as appears on your trouble shooting page.
Here is the Air installation log, followed by the MSI log.
[2013-04-25:06:53:46] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:06:53:46] Commandline is:
[2013-04-25:06:53:46] No installed runtime detected
[2013-04-25:06:53:57] Relaunching with elevation
[2013-04-25:06:53:57] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\air79c1.tmp\adobe air installer.exe -ei
[2013-04-25:06:54:02] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:06:54:02] Commandline is: -stdio \\.\pipe\AIR_1172_0 -ei
[2013-04-25:06:54:02] No installed runtime detected
[2013-04-25:06:54:03] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:06:54:04] Installing msi at c:\users\steve\appdata\local\temp
\air79c1.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:06:54:10] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:06:54:10] Rolling back install of c:\users\steve\appdata\local
\temp\air79c1.tmp\setup.msi
[2013-04-25:06:54:10] Rollback complete
[2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Runtime Installer end with exit code 7
[2013-04-25:06:54:20] Runtime Installer end with exit code 7
[2013-04-25:06:55:38] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:06:55:38] Commandline is:
[2013-04-25:06:55:38] No installed runtime detected
[2013-04-25:06:55:45] Relaunching with elevation
[2013-04-25:06:55:45] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\air30fe.tmp\adobe air installer.exe -ei
[2013-04-25:06:55:48] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:06:55:48] Commandline is: -stdio \\.\pipe\AIR_1264_0 -ei
[2013-04-25:06:55:48] No installed runtime detected
[2013-04-25:06:55:49] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:06:55:51] Installing msi at c:\users\steve\appdata\local\temp
\air30fe.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:06:55:55] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:06:55:55] Rolling back install of c:\users\steve\appdata\local
\temp\air30fe.tmp\setup.msi
[2013-04-25:06:55:55] Rollback complete
[2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Runtime Installer end with exit code 7
[2013-04-25:06:55:59] Runtime Installer end with exit code 7
[2013-04-25:07:05:12] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:07:05:12] Commandline is:
[2013-04-25:07:05:12] No installed runtime detected
[2013-04-25:07:05:18] Relaunching with elevation
[2013-04-25:07:05:18] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\air953.tmp\adobe air installer.exe -ei
[2013-04-25:07:05:24] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:07:05:24] Commandline is: -stdio \\.\pipe\AIR_3888_0 -ei
[2013-04-25:07:05:24] No installed runtime detected
[2013-04-25:07:05:24] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:07:05:26] Installing msi at c:\users\steve\appdata\local\temp
\air953.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:05:29] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:07:05:29] Rolling back install of c:\users\steve\appdata\local
\temp\air953.tmp\setup.msi
[2013-04-25:07:05:29] Rollback complete
[2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Runtime Installer end with exit code 7
[2013-04-25:07:05:31] Runtime Installer end with exit code 7
[2013-04-25:07:06:12] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:07:06:12] Commandline is:
[2013-04-25:07:06:12] No installed runtime detected
[2013-04-25:07:06:21] Relaunching with elevation
[2013-04-25:07:06:22] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\aire916.tmp\adobe air installer.exe -ei
[2013-04-25:07:06:32] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:07:06:32] Commandline is: -stdio \\.\pipe\AIR_5884_0 -ei
[2013-04-25:07:06:32] No installed runtime detected
[2013-04-25:07:06:32] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:07:06:33] Installing msi at c:\users\steve\appdata\local\temp
\aire916.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:06:37] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:07:06:37] Rolling back install of c:\users\steve\appdata\local
\temp\aire916.tmp\setup.msi
[2013-04-25:07:06:37] Rollback complete
[2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Runtime Installer end with exit code 7
[2013-04-25:07:06:40] Runtime Installer end with exit code 7
[2013-04-25:07:26:15] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:07:26:15] Commandline is:
[2013-04-25:07:26:15] No installed runtime detected
[2013-04-25:07:26:28] Relaunching with elevation
[2013-04-25:07:26:28] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\air3063.tmp\adobe air installer.exe -ei
[2013-04-25:07:26:37] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:07:26:37] Commandline is: -stdio \\.\pipe\AIR_2348_0 -ei
[2013-04-25:07:26:37] No installed runtime detected
[2013-04-25:07:26:37] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:07:26:39] Installing msi at c:\users\steve\appdata\local\temp
\air3063.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:26:48] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:07:26:48] Rolling back install of c:\users\steve\appdata\local
\temp\air3063.tmp\setup.msi
[2013-04-25:07:26:48] Rollback complete
[2013-04-25:07:26:48] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:26:48] Runtime Installer end with exit code 7
[2013-04-25:07:46:09] Runtime Installer end with exit code 7
=== Verbose logging started: 25/04/2013 08:34:51 Build type: SHIP UNICODE
5.00.7601.00 Calling process: C:\windows\System32\msiexec.exe ===
MSI (c) (68:6C) [08:34:51:397]: Font created. Charset: Req=0, Ret=0, Font:
Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (68:6C) [08:34:51:397]: Font created. Charset: Req=0, Ret=0, Font:
Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (68:70) [08:34:51:469]: Resetting cached policy values
MSI (c) (68:70) [08:34:51:469]: Machine policy value 'Debug' is 0
MSI (c) (68:70) [08:34:51:469]: ******* RunEngine:
******* Product: C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
******* Action:
******* CommandLine: **********
MSI (c) (68:70) [08:34:51:473]: Machine policy value 'DisableUserInstalls' is 0
MSI (c) (68:70) [08:34:51:653]: SOFTWARE RESTRICTION POLICY: Verifying
package --> 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi' against
software restriction policy
MSI (c) (68:70) [08:34:51:654]: SOFTWARE RESTRICTION POLICY: C:\Users
\Steve\Downloads\MicrosoftFixit50381.msi has a digital signature
MSI (c) (68:70) [08:34:51:966]: SOFTWARE RESTRICTION POLICY: C:\Users
\Steve\Downloads\MicrosoftFixit50381.msi is permitted to run at the
'unrestricted' authorization level.
MSI (c) (68:70) [08:34:51:986]: Cloaking enabled.
MSI (c) (68:70) [08:34:51:986]: Attempting to enable all disabled privileges
before calling Install on Server
MSI (c) (68:70) [08:34:52:001]: End dialog not enabled
MSI (c) (68:70) [08:34:52:001]: Original package ==> C:\Users\Steve
\Downloads\MicrosoftFixit50381.msi
MSI (c) (68:70) [08:34:52:001]: Package we're running from ==> C:\Users
\Steve\Downloads\MicrosoftFixit50381.msi
MSI (c) (68:70) [08:34:52:010]: APPCOMPAT: Compatibility mode property
overrides found.
MSI (c) (68:70) [08:34:52:012]: APPCOMPAT: looking for appcompat database
entry with ProductCode '{55D13F49-FCB8-4892-8266-05D373FCAA61}'.
MSI (c) (68:70) [08:34:52:012]: APPCOMPAT: no matching ProductCode found
in database.
MSI (c) (68:70) [08:34:52:041]: MSCOREE not loaded loading copy from
system32
MSI (c) (68:70) [08:34:52:063]: Machine policy value 'TransformsSecure' is 0
MSI (c) (68:70) [08:34:52:063]: User policy value 'TransformsAtSource' is 0
MSI (c) (68:70) [08:34:52:064]: Note: 1: 2262 2: File 3: -2147287038
MSI (c) (68:70) [08:34:52:064]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (c) (68:70) [08:34:52:065]: Machine policy value 'DisablePatch' is 0
MSI (c) (68:70) [08:34:52:065]: Machine policy value 'AllowLockdownPatch' is
0
MSI (c) (68:70) [08:34:52:066]: Machine policy value 'DisableMsi' is 0
MSI (c) (68:70) [08:34:52:066]: Machine policy value 'AlwaysInstallElevated' is
0
MSI (c) (68:70) [08:34:52:066]: User policy value 'AlwaysInstallElevated' is 0
MSI (c) (68:70) [08:34:52:066]: Running product '{55D13F49-FCB8-4892-
8266-05D373FCAA61}' with user privileges: It's not assigned.
MSI (c) (68:70) [08:34:52:067]: Machine policy value 'DisableLUAPatching' is 0
MSI (c) (68:70) [08:34:52:067]: Machine policy value
'DisableFlyWeightPatching' is 0
MSI (c) (68:70) [08:34:52:068]: Enabling baseline caching for this transaction
since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor
update patch is active
MSI (c) (68:70) [08:34:52:071]: APPCOMPAT: looking for appcompat database
entry with ProductCode '{55D13F49-FCB8-4892-8266-05D373FCAA61}'.
MSI (c) (68:70) [08:34:52:072]: APPCOMPAT: no matching ProductCode found
in database.
MSI (c) (68:70) [08:34:52:072]: Transforms are not secure.
MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding MsiLogFileLocation
property. Its value is 'C:\Users\Steve\AppData\Local\Temp\MSIa5745.LOG'.
MSI (c) (68:70) [08:34:52:073]: Command Line: CURRENTDIRECTORY=C:\Users
\Steve\Downloads CLIENTUILEVEL=0 CLIENTPROCESSID=9576
MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding PackageCode
property. Its value is '{1C7C3009-013E-4A16-9A0F-0000FB80A613}'.
MSI (c) (68:70) [08:34:52:073]: Product Code passed to Engine.Initialize:
MSI (c) (68:70) [08:34:52:073]: Product Code from property table before
transforms: '{55D13F49-FCB8-4892-8266-05D373FCAA61}'
MSI (c) (68:70) [08:34:52:073]: Product Code from property table after
transforms: '{55D13F49-FCB8-4892-8266-05D373FCAA61}'
MSI (c) (68:70) [08:34:52:073]: Product not registered: beginning first-time
install
MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding ProductState
property. Its value is '-1'.
MSI (c) (68:70) [08:34:52:073]: Entering
CMsiConfigurationManager::SetLastUsedSource.
MSI (c) (68:70) [08:34:52:073]: User policy value 'SearchOrder' is 'nmu'
MSI (c) (68:70) [08:34:52:073]: Adding new sources is allowed.
MSI (c) (68:70) [08:34:52:074]: PROPERTY CHANGE: Adding
PackagecodeChanging property. Its value is '1'.
MSI (c) (68:70) [08:34:52:074]: Package name extracted from package path:
'MicrosoftFixit50381.msi'
MSI (c) (68:70) [08:34:52:075]: Package to be registered:
'MicrosoftFixit50381.msi'
MSI (c) (68:70) [08:34:52:075]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (68:70) [08:34:52:078]: Note: 1: 2262 2: AdminProperties 3: -
2147287038
MSI (c) (68:70) [08:34:52:078]: Machine policy value 'AlwaysInstallElevated' is
0
MSI (c) (68:70) [08:34:52:078]: User policy value 'AlwaysInstallElevated' is 0
MSI (c) (68:70) [08:34:52:079]: Running product '{55D13F49-FCB8-4892-
8266-05D373FCAA61}' with user privileges: It's not assigned.
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding
CURRENTDIRECTORY property. Its value is 'C:\Users\Steve\Downloads'.
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding CLIENTUILEVEL
property. Its value is '0'.
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding CLIENTPROCESSID
property. Its value is '9576'.
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding
MsiSystemRebootPending property. Its value is '1'.
MSI (c) (68:70) [08:34:52:079]: TRANSFORMS property is now:
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding VersionDatabase
property. Its value is '200'.
MSI (c) (68:70) [08:34:52:081]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming
MSI (c) (68:70) [08:34:52:082]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\Favorites
MSI (c) (68:70) [08:34:52:084]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (c) (68:70) [08:34:52:085]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\Documents
MSI (c) (68:70) [08:34:52:086]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (c) (68:70) [08:34:52:088]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Recent
MSI (c) (68:70) [08:34:52:089]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\SendTo
MSI (c) (68:70) [08:34:52:091]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Templates
MSI (c) (68:70) [08:34:52:092]: SHELL32::SHGetFolderPath returned: C:
\ProgramData
MSI (c) (68:70) [08:34:52:093]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Local
MSI (c) (68:70) [08:34:52:094]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\Pictures
MSI (c) (68:70) [08:34:52:097]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
\Administrative Tools
MSI (c) (68:70) [08:34:52:098]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
\Startup
MSI (c) (68:70) [08:34:52:099]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (c) (68:70) [08:34:52:101]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (c) (68:70) [08:34:52:102]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\Desktop
MSI (c) (68:70) [08:34:52:104]: SHELL32::SHGetFolderPath returned: C:
\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (c) (68:70) [08:34:52:106]: SHELL32::SHGetFolderPath returned: C:
\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (c) (68:70) [08:34:52:106]: SHELL32::SHGetFolderPath returned: C:
\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (c) (68:70) [08:34:52:107]: SHELL32::SHGetFolderPath returned: C:
\ProgramData\Microsoft\Windows\Start Menu
MSI (c) (68:70) [08:34:52:109]: SHELL32::SHGetFolderPath returned: C:
\Users\Public\Desktop
MSI (c) (68:70) [08:34:52:113]: SHELL32::SHGetFolderPath returned: C:
\windows\Fonts
MSI (c) (68:70) [08:34:52:115]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans
Serif 4: 0 5: 16
MSI (c) (68:70) [08:34:52:147]: MSI_LUA: Setting AdminUser property to 1
because this is the client or the user has already permitted elevation
MSI (c) (68:70) [08:34:52:147]: PROPERTY CHANGE: Adding AdminUser
property. Its value is '1'.
MSI (c) (68:70) [08:34:52:147]: PROPERTY CHANGE: Adding Privileged
property. Its value is '1'.
MSI (c) (68:70) [08:34:52:148]: Note: 1: 1402 2: HKEY_CURRENT_USER
\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (c) (68:70) [08:34:52:148]: PROPERTY CHANGE: Adding USERNAME
property. Its value is 'Steve'.
MSI (c) (68:70) [08:34:52:149]: Note: 1: 1402 2: HKEY_CURRENT_USER
\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding DATABASE
property. Its value is 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi'.
MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding OriginalDatabase
property. Its value is 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi'.
MSI (c) (68:70) [08:34:52:149]: Machine policy value 'MsiDisableEmbeddedUI' is
0
MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding SourceDir
property. Its value is 'C:\Users\Steve\Downloads\'.
MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding SOURCEDIR
property. Its value is 'C:\Users\Steve\Downloads\'.
MSI (c) (68:6C) [08:34:52:153]: PROPERTY CHANGE: Adding VersionHandler
property. Its value is '5.00'.
=== Logging started: 25/04/2013 08:34:52 ===
MSI (c) (68:70) [08:34:52:171]: Note: 1: 2262 2: PatchPackage 3: -
2147287038
MSI (c) (68:70) [08:34:52:172]: Machine policy value 'DisableRollback' is 0
MSI (c) (68:70) [08:34:52:172]: User policy value 'DisableRollback' is 0
MSI (c) (68:70) [08:34:52:172]: PROPERTY CHANGE: Adding UILevel property.
Its value is '5'.
MSI (c) (68:70) [08:34:52:172]: Note: 1: 2262 2: Font 3: -2147287038
MSI (c) (68:70) [08:34:52:174]: PROPERTY CHANGE: Adding ACTION property.
Its value is 'INSTALL'.
MSI (c) (68:70) [08:34:52:174]: Doing action: INSTALL
Action 08:34:52: INSTALL.
Action start 08:34:52: INSTALL.
MSI (c) (68:70) [08:34:52:176]: UI Sequence table 'InstallUISequence' is
present and populated.
MSI (c) (68:70) [08:34:52:176]: Running UISequence
MSI (c) (68:70) [08:34:52:176]: PROPERTY CHANGE: Adding EXECUTEACTION
property. Its value is 'INSTALL'.
MSI (c) (68:70) [08:34:52:176]: Doing action: Milestone_ERRCA_UIAN726
Action 08:34:52: Milestone_ERRCA_UIAN726.
Action start 08:34:52: Milestone_ERRCA_UIAN726.
MSI (c) (68:70) [08:34:52:177]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_ERRCA_UIAN726'
MSI (c) (68:70) [08:34:52:178]: PROPERTY CHANGE: Adding Milestone
property. Its value is 'ERRCA_UIANDADVERTISED'.
Action ended 08:34:52: Milestone_ERRCA_UIAN726. Return value 1.
MSI (c) (68:70) [08:34:52:178]: Skipping action: ERRCA_UIANDADVERTISED
(condition is false)
MSI (c) (68:70) [08:34:52:178]: Doing action: Milestone_AppSearch122
Action 08:34:52: Milestone_AppSearch122.
Action start 08:34:52: Milestone_AppSearch122.
MSI (c) (68:70) [08:34:52:180]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_AppSearch122'
MSI (c) (68:70) [08:34:52:180]: PROPERTY CHANGE: Modifying Milestone
property. Its current value is 'ERRCA_UIANDADVERTISED'. Its new value:
'AppSearch'.
Action ended 08:34:52: Milestone_AppSearch122. Return value 1.
MSI (c) (68:70) [08:34:52:181]: Doing action: AppSearch
Action 08:34:52: AppSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:52: AppSearch.
MSI (c) (68:70) [08:34:52:182]: Note: 1: 2262 2: AppSearch 3: -2147287038
Action ended 08:34:52: AppSearch. Return value 1.
MSI (c) (68:70) [08:34:52:183]: Doing action: FindRelatedProducts
Action 08:34:52: FindRelatedProducts. {\FinalUIFont}
[PROGRESS_RESTORE_TXT]
Action start 08:34:52: FindRelatedProducts.
Action ended 08:34:52: FindRelatedProducts. Return value 1.
MSI (c) (68:70) [08:34:52:185]: Doing action: Milestone_EulaForm201
Action 08:34:52: Milestone_EulaForm201.
Action start 08:34:52: Milestone_EulaForm201.
MSI (c) (68:70) [08:34:52:186]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_EulaForm201'
MSI (c) (68:70) [08:34:52:187]: PROPERTY CHANGE: Modifying Milestone
property. Its current value is 'AppSearch'. Its new value: 'EulaForm'.
Action ended 08:34:52: Milestone_EulaForm201. Return value 1.
MSI (c) (68:70) [08:34:52:187]: Doing action: EulaForm
Action 08:34:52: EulaForm.
Action start 08:34:52: EulaForm.
MSI (c) (68:70) [08:34:52:193]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'EulaForm'
MSI (c) (68:6C) [08:34:52:205]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VSI_MS_Sans_Serif13.0_0_0 textstyle, the system created a 'MS
Sans Serif' font, in 0 character set, of 13 pixels height.
MSI (c) (68:6C) [08:34:52:221]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VsdDefaultUIFont.524F4245_5254_5341_4C45_534153783400
textstyle, the system created a 'MS Sans Serif' font, in 0 character set, of 13
pixels height.
MSI (c) (68:6C) [08:34:52:225]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VSI_MS_Sans_Serif16.0_1_0 textstyle, the system created a 'MS
Sans Serif' font, in 0 character set, of 20 pixels height.
MSI (c) (68:6C) [08:34:52:301]: Note: 1: 2262 2: CheckBox 3: -2147287038
Action 08:34:52: EulaForm. Dialog created
MSI (c) (68:10) [08:34:52:312]: Note: 1: 2731 2: 0
MSI (c) (68:6C) [08:34:55:670]: PROPERTY CHANGE: Adding EulaForm_Property
property. Its value is '1'.
Action ended 08:34:56: EulaForm. Return value 1.
MSI (c) (68:70) [08:34:56:881]: Doing action: EULAACCEPTED_ACTION
Action 08:34:56: EULAACCEPTED_ACTION.
Action start 08:34:56: EULAACCEPTED_ACTION.
MSI (c) (68:70) [08:34:56:883]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'EULAACCEPTED_ACTION'
MSI (c) (68:70) [08:34:56:883]: PROPERTY CHANGE: Adding EULAACCEPTED
property. Its value is '1'.
Action ended 08:34:56: EULAACCEPTED_ACTION. Return value 1.
MSI (c) (68:70) [08:34:56:884]: Doing action: Milestone_LaunchCond24
Action 08:34:56: Milestone_LaunchCond24.
Action start 08:34:56: Milestone_LaunchCond24.
MSI (c) (68:70) [08:34:56:886]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_LaunchCond24'
MSI (c) (68:70) [08:34:56:887]: PROPERTY CHANGE: Modifying Milestone
property. Its current value is 'EulaForm'. Its new value: 'LaunchConditions'.
Action ended 08:34:56: Milestone_LaunchCond24. Return value 1.
MSI (c) (68:70) [08:34:56:889]: Doing action: LaunchConditions
Action 08:34:56: LaunchConditions. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: LaunchConditions.
Action ended 08:34:56: LaunchConditions. Return value 1.
MSI (c) (68:70) [08:34:56:891]: Doing action: CCPSearch
Action 08:34:56: CCPSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: CCPSearch.
MSI (c) (68:70) [08:34:56:892]: Note: 1: 2262 2: CCPSearch 3: -2147287038
Action ended 08:34:56: CCPSearch. Return value 1.
MSI (c) (68:70) [08:34:56:892]: Doing action: RMCCPSearch
Action 08:34:56: RMCCPSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: RMCCPSearch.
MSI (c) (68:70) [08:34:56:893]: Note: 1: 2262 2: CCPSearch 3: -2147287038
Action ended 08:34:56: RMCCPSearch. Return value 0.
MSI (c) (68:70) [08:34:56:894]: Doing action: ValidateProductID
Action 08:34:56: ValidateProductID. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: ValidateProductID.
Action ended 08:34:56: ValidateProductID. Return value 1.
MSI (c) (68:70) [08:34:56:895]: Doing action: Milestone_DIRCA_TARG947
Action 08:34:56: Milestone_DIRCA_TARG947.
Action start 08:34:56: Milestone_DIRCA_TARG947.
MSI (c) (68:70) [08:34:56:897]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_DIRCA_TARG947'
MSI (c) (68:70) [08:34:56:897]: PROPERTY CHANGE: Modifying Milestone
property. Its current value is 'LaunchConditions'. Its new value:
'DIRCA_TARGETDIR'.
Action ended 08:34:56: Milestone_DIRCA_TARG947. Return value 1.
MSI (c) (68:70) [08:34:56:897]: Doing action: DIRCA_TARGETDIR
Action 08:34:56: DIRCA_TARGETDIR. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: DIRCA_TARGETDIR.
MSI (c) (68:70) [08:34:56:899]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'DIRCA_TARGETDIR'
MSI (c) (68:70) [08:34:56:900]: PROPERTY CHANGE: Adding TARGETDIR
property. Its value is 'C:\Program Files\Microsoft\Microsoft Fix it 50381'.
Action ended 08:34:56: DIRCA_TARGETDIR. Return value 1.
MSI (c) (68:70) [08:34:56:900]: Doing action: CostInitialize
Action 08:34:56: CostInitialize. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: CostInitialize.
MSI (c) (68:70) [08:34:56:901]: Machine policy value 'MaxPatchCacheSize' is
10
MSI (c) (68:70) [08:34:56:901]: Baseline: Sorting baselines for {55D13F49-
FCB8-4892-8266-05D373FCAA61}.
MSI (c) (68:70) [08:34:56:901]: Baseline: New baseline 2.1.3 from transaction.
MSI (c) (68:70) [08:34:56:902]: Baseline: Sorted order Native: Order 0.
MSI (c) (68:70) [08:34:56:902]: Baseline Data Table:
MSI (c) (68:70) [08:34:56:902]: ProductCode: {55D13F49-FCB8-4892-8266-
05D373FCAA61} Version: 2.1.3 Attributes: 0 PatchId: Native BaselineId: -
2147483648 Order: 0
MSI (c) (68:70) [08:34:56:902]: Baseline File Table:
MSI (c) (68:70) [08:34:56:912]: PROPERTY CHANGE: Adding ROOTDRIVE
property. Its value is 'D:\'.
MSI (c) (68:70) [08:34:56:913]: PROPERTY CHANGE: Adding CostingComplete
property. Its value is '0'.
Action ended 08:34:56: CostInitialize. Return value 1.
MSI (c) (68:70) [08:34:56:914]: Doing action: FileCost
Action 08:34:56: FileCost. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: FileCost.
MSI (c) (68:70) [08:34:56:915]: Note: 1: 2262 2: MsiAssembly 3: -2147287038
MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: RemoveFile 3: -2147287038
MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: MoveFile 3: -2147287038
MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: DuplicateFile 3: -2147287038
MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: Shortcut 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: Class 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: TypeLib 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: IniFile 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: ReserveCost 3: -2147287038
Action ended 08:34:56: FileCost. Return value 1.
MSI (c) (68:70) [08:34:56:917]: Doing action: IsolateComponents
Action 08:34:56: IsolateComponents. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: IsolateComponents.
MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: BindImage 3: -2147287038
MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: IsolatedComponent 3: -
2147287038
MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: Patch 3: -2147287038
Action ended 08:34:56: IsolateComponents. Return value 1.
MSI (c) (68:70) [08:34:56:920]: Skipping action: ResumeForm (condition is
false)
MSI (c) (68:70) [08:34:56:920]: Skipping action: MaintenanceForm (condition
is false)
MSI (c) (68:70) [08:34:56:920]: Doing action: CostFinalize
Action 08:34:56: CostFinalize. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: CostFinalize.
MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding OutOfDiskSpace
property. Its value is '0'.
MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
OutOfNoRbDiskSpace property. Its value is '0'.
MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
PrimaryVolumeSpaceAvailable property. Its value is '0'.
MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
PrimaryVolumeSpaceRequired property. Its value is '0'.
MSI (c) (68:70) [08:34:56:921]: PROPERTY CHANGE: Adding
PrimaryVolumeSpaceRemaining property. Its value is '0'.
MSI (c) (68:70) [08:34:56:921]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (68:70) [08:34:56:921]: Note: 1: 2262 2: Condition 3: -2147287038
MSI (c) (68:70) [08:34:56:923]: PROPERTY CHANGE: Modifying TARGETDIR
property. Its current value is 'C:\Program Files\Microsoft\Microsoft Fix it 50381'.
Its new value: 'C:\Program Files\Microsoft\Microsoft Fix it 50381\'.
MSI (c) (68:70) [08:34:56:923]: Target path resolution complete. Dumping
Directory table...
MSI (c) (68:70) [08:34:56:923]: Note: target paths subject to change (via
custom actions or browsing)
MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: TARGETDIR , Object: C:
\Program Files\Microsoft\Microsoft Fix it 50381\
MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: WindowsFolder , Object: C:
\windows\
MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: ProgramMenuFolder ,
Object: C:\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu
\Programs\
MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: DesktopFolder , Object: C:
\Users\Steve\Desktop\
MSI (c) (68:70) [08:34:56:923]: PROPERTY CHANGE: Adding INSTALLLEVEL
property. Its value is '1'.
MSI (c) (68:70) [08:34:56:923]: Note: 1: 2262 2: IsolatedComponent 3: -
2147287038
MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: BindImage 3: -2147287038
MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: RemoveFile 3: -2147287038
Action ended 08:34:56: CostFinalize. Return value 1.
MSI (c) (68:70) [08:34:56:925]: Doing action: ProgressForm
Action 08:34:56: ProgressForm.
Action start 08:34:56: ProgressForm.
MSI (c) (68:70) [08:34:56:926]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'ProgressForm'
MSI (c) (68:6C) [08:34:56:938]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control Line1 on dialog ProgressForm extends beyond the
boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This
may indicate a problem with this package. The error code is 2826. The
arguments are: ProgressForm, Line1, to the right
MSI (c) (68:6C) [08:34:56:941]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control Line2 on dialog ProgressForm extends beyond the
boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This
may indicate a problem with this package. The error code is 2826. The
arguments are: ProgressForm, Line2, to the right
MSI (c) (68:6C) [08:34:56:948]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control BannerBmp on dialog ProgressForm extends beyond
the boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This
may indicate a problem with this package. The error code is 2826. The
arguments are: ProgressForm, BannerBmp, to the right
Action 08:34:56: ProgressForm. Dialog created
Action ended 08:34:57: ProgressForm. Return value 1.
MSI (c) (68:70) [08:34:57:011]: Doing action: ExecuteAction
Action 08:34:57: ExecuteAction. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
MSI (c) (68:6C) [08:34:57:012]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For FinalUIFont textstyle, the system created a 'Arial' font, in 0
character set, of 15 pixels height.
Action start 08:34:57: ExecuteAction.
MSI (c) (68:70) [08:34:57:035]: PROPERTY CHANGE: Adding SECONDSEQUENCE
property. Its value is '1'.
MSI (c) (68:70) [08:34:57:043]: Grabbed execution mutex.
MSI (c) (68:70) [08:34:57:043]: Incrementing counter to disable shutdown.
Counter after increment: 0
MSI (c) (68:70) [08:34:57:045]: Switching to server: TARGETDIR="C:\Program
Files\Microsoft\Microsoft Fix it 50381\" EULAACCEPTED="1"
CURRENTDIRECTORY="C:\Users\Steve\Downloads" CLIENTUILEVEL="0"
CLIENTPROCESSID="9576" USERNAME="Steve" SOURCEDIR="C:\Users\Steve
\Downloads\" ACTION="INSTALL" EXECUTEACTION="INSTALL" ROOTDRIVE="D:\"
INSTALLLEVEL="1" SECONDSEQUENCE="1" ADDLOCAL=DefaultFeature
MSI (s) (C8:D4) [08:34:57:086]: Running installation inside multi-package
transaction C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
MSI (s) (C8:D4) [08:34:57:086]: Grabbed execution mutex.
MSI (s) (C8:BC) [08:34:57:092]: Resetting cached policy values
MSI (s) (C8:BC) [08:34:57:092]: Machine policy value 'Debug' is 0
MSI (s) (C8:BC) [08:34:57:092]: ******* RunEngine:
******* Product: C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
******* Action: INSTALL
******* CommandLine: **********
MSI (s) (C8:BC) [08:34:57:096]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (C8:BC) [08:34:57:097]: Setting cached product context: User non-
assigned for product: 48945AC3B41AEF24F91FE79A10157D52
MSI (s) (C8:BC) [08:34:57:097]: Using cached product context: User non-
assigned for product: 48945AC3B41AEF24F91FE79A10157D52
MSI (s) (C8:BC) [08:34:57:099]: Setting cached product context: User non-
assigned for product: 6BBFDF96D153C8B4988D68D79C0D2A4A
MSI (s) (C8:BC) [08:34:57:099]: Using cached product context: User non-
assigned for product: 6BBFDF96D153C8B4988D68D79C0D2A4A
MSI (s) (C8:BC) [08:34:57:101]: Setting cached product context: User non-
assigned for product: CAB1E4D953B64F542BD433D9568A0AB6
MSI (s) (C8:BC) [08:34:57:101]: Using cached product context: User non-
assigned for product: CAB1E4D953B64F542BD433D9568A0AB6
MSI (s) (C8:BC) [08:34:57:103]: Setting cached product context: User non-
assigned for product: DED5B648C8CDA1E45B4BF9B5930AACEC
MSI (s) (C8:BC) [08:34:57:103]: Using cached product context: User non-
assigned for product: DED5B648C8CDA1E45B4BF9B5930AACEC
MSI (s) (C8:BC) [08:34:57:104]: Setting cached product context: User non-
assigned for product: E2EE924EC67B3554B8404B55780FF01D
MSI (s) (C8:BC) [08:34:57:104]: Using cached product context: User non-
assigned for product: E2EE924EC67B3554B8404B55780FF01D
MSI (s) (C8:BC) [08:34:57:106]: Setting cached product context: machine
assigned for product: 00002109001001400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:106]: Using cached product context: machine
assigned for product: 00002109001001400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:107]: Setting cached product context: machine
assigned for product: 00002109001031400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:108]: Using cached product context: machine
assigned for product: 00002109001031400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:110]: Setting cached product context: machine
assigned for product: 00002109001070400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:110]: Using cached product context: machine
assigned for product: 00002109001070400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:111]: Setting cached product context: machine
assigned for product: 000021090010C0400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:111]: Using cached product context: machineHi Chris,
The AIR installation log is in my original post - about 12 paras down but here is is:
[2013-04-25:06:53:46] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:06:53:46] Commandline is:
[2013-04-25:06:53:46] No installed runtime detected
[2013-04-25:06:53:57] Relaunching with elevation
[2013-04-25:06:53:57] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air79c1.tmp\adobe air installer.exe -ei
[2013-04-25:06:54:02] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:06:54:02] Commandline is: -stdio \\.\pipe\AIR_1172_0 -ei
[2013-04-25:06:54:02] No installed runtime detected
[2013-04-25:06:54:03] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:06:54:04] Installing msi at c:\users\steve\appdata\local\temp\air79c1.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:06:54:10] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Rolling back install of c:\users\steve\appdata\local\temp\air79c1.tmp\setup.msi
[2013-04-25:06:54:10] Rollback complete
[2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Runtime Installer end with exit code 7
[2013-04-25:06:54:20] Runtime Installer end with exit code 7
[2013-04-25:06:55:38] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:06:55:38] Commandline is:
[2013-04-25:06:55:38] No installed runtime detected
[2013-04-25:06:55:45] Relaunching with elevation
[2013-04-25:06:55:45] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air30fe.tmp\adobe air installer.exe -ei
[2013-04-25:06:55:48] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:06:55:48] Commandline is: -stdio \\.\pipe\AIR_1264_0 -ei
[2013-04-25:06:55:48] No installed runtime detected
[2013-04-25:06:55:49] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:06:55:51] Installing msi at c:\users\steve\appdata\local\temp\air30fe.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:06:55:55] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Rolling back install of c:\users\steve\appdata\local\temp\air30fe.tmp\setup.msi
[2013-04-25:06:55:55] Rollback complete
[2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Runtime Installer end with exit code 7
[2013-04-25:06:55:59] Runtime Installer end with exit code 7
[2013-04-25:07:05:12] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:07:05:12] Commandline is:
[2013-04-25:07:05:12] No installed runtime detected
[2013-04-25:07:05:18] Relaunching with elevation
[2013-04-25:07:05:18] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air953.tmp\adobe air installer.exe -ei
[2013-04-25:07:05:24] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:07:05:24] Commandline is: -stdio \\.\pipe\AIR_3888_0 -ei
[2013-04-25:07:05:24] No installed runtime detected
[2013-04-25:07:05:24] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:07:05:26] Installing msi at c:\users\steve\appdata\local\temp\air953.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:05:29] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Rolling back install of c:\users\steve\appdata\local\temp\air953.tmp\setup.msi
[2013-04-25:07:05:29] Rollback complete
[2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Runtime Installer end with exit code 7
[2013-04-25:07:05:31] Runtime Installer end with exit code 7
[2013-04-25:07:06:12] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:07:06:12] Commandline is:
[2013-04-25:07:06:12] No installed runtime detected
[2013-04-25:07:06:21] Relaunching with elevation
[2013-04-25:07:06:22] Launching subprocess with commandline c:\users\steve\appdata\local\temp\aire916.tmp\adobe air installer.exe -ei
[2013-04-25:07:06:32] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:07:06:32] Commandline is: -stdio \\.\pipe\AIR_5884_0 -ei
[2013-04-25:07:06:32] No installed runtime detected
[2013-04-25:07:06:32] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:07:06:33] Installing msi at c:\users\steve\appdata\local\temp\aire916.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:06:37] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Rolling back install of c:\users\steve\appdata\local\temp\aire916.tmp\setup.msi
[2013-04-25:07:06:37] Rollback complete
[2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Runtime Installer end with exit code 7
[2013-04-25:07:06:40] Runtime Installer end with exit code 7
[2013-04-25:07:26:15] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:07:26:15] Commandline is:
[2013-04-25:07:26:15] No installed runtime detected
[2013-04-25:07:26:28] Relaunching with elevation
[2013-04-25:07:26:28] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air3063.tmp\adobe air installer.exe -ei
[2013-04-25:07:26:37] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:07:26:37] Commandline is: -stdio \\.\pipe\AIR_2348_0 -ei
[2013-04-25:07:26:37] No installed runtime detected
[2013-04-25:07:26:37] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:07:26:39] Installing msi at c:\users\steve\appdata\local\temp\air3063.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:26:48] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:26:48] Rolling back install of c:\users\steve\appdata\local\temp\air3063.tmp\setup.msi
[2013-04-25:07:26:48] Rollback complete
[2013-04-25:07:26:48] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:26:48] Runtime Installer end with exit code 7
[2013-04-25:07:46:09] Runtime Installer end with exit code 7
Maybe you are looking for
-
Hi, I am running FCP 5.1 on a PPC G5 and am (ugently) looking for the manual 5.1.2 upgrade. I found a package (36 MB) for download at a site of a university but it will not install: a error message keeps popping up telling me to use Apple's automatic
-
Final Cut Express HD 3.5 Quits unexpectedly while opening
Hi all. I have Final Cut Express HD 3.5. I bought it several years ago and used it on my Mac Book Pro (2006 model). I bought an iMac a few years later (December 2009). I can't remember what OS the iMac came with, but it's currently running 10.6.8. I
-
My order has been processed - why can I not export PDF files
Is this on-line service a scam?
-
Can you still use GPS on the unlocked Version of the iPhone 3G? I want GPS but no contract or phone service! http://www.maclife.com/article/news/appleoffers_contractfree_iphone_your_richfriends#comment-36767 Message was edited by: iEat, iLive, iPod
-
I really don't understand why the iphone can not be set up like a tv monitor.... we already have Brightness on the iphone why cant a screen be set up as below..... SETTINGS BRIGHTNESS I-------#--I COLOR I--------#-I TINT I--#-------I COOLER I-----#--