Problem Installing Lookout 6.1 After Install/Un​install Lookout 6.5

I'm getting the message "You have a higher version of NI Uninstaller in your system" when I was trying to re-install Lookout 6.1 after installing and uninstalling Lookout 6.5.
The error says for me to uninstall the higher version of NI Uninstaller?  Where and how do I do this?
Thanks,
Max

I'm running Windows 7 Professional (64 bit)
1) This is the error I get when installing Lookout 6.5
I then select "Yes" to continue, choose "evaluation mode" and let it complete the install, restart computer and run Lookout 6.5.
But Lookout 6.5 does not run and I get the following error:
2) Now I try and install Lookout 6.1,  the part where it is initializing the installer completes and I click on "Next"
    I go through with the information input for user/company/serial, select complete install, license agreement and then click next and I get the following error:
And now I am at the problem.
So I click on Yes (to continue) and I get the following error:
and I continue and get the next error
and so on...
Thanks for your help.  I'm almost short of formattimg the drive and reinstalling the entire system but I'm hoping it's just a minor item that was overlooked.

Similar Messages

  • Problem with Rescue and Recovery after installing Norton Internet Security 2010

    Hi all.
    It's my first time in this forum.
    I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
    The message I get it:
    "Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
    I tried to close the Norton but I couldn't find how.
    Tanks
    Doron71

    Hi and welcome to the forum,
    the reason for this situation is, that the antivir files are protected from being modified.
    This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
    So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
    This will skip the backup of this file and will fix your situation.
    Please let me know, if you have covered this.
    Cheers

  • Problem installing trial version of After Effects CS4

    Hi,
    I'm trying to install the trial version of After Effects CS4 on Windows Vista Ultimate Service Pack 1 32-bit Operating System, Processor 2.4GHz, RAM 4GB.
    At the initializing stage it gets to 90% on the 'Checking System Profile...' dialog box, something flashes and then it freezes.
    I've downloaded it a second time in case of corruption.
    I've rebooted several times and retried it with no other applications running.
    I've run updates on any existing adobe products I have.
    Any ideas?  I've never had problems installing adobe products before.
    Thanks.

    Not your fault, known issue.
    a) Download the Microsoft Installer Cleanup Utility and install it
    b) Download the CS4 Cleanup Utility from Adobe's support pages
    c) Run the CS4 Cleanup, electing to remove all debris from your failed install
    d) Manually uninstall all instances of Adobe AIR products (Acrobat.com, Adobe Media Palyer) using Add or Remove Programs
    e) Launch the Microsoft Installer Cleanup and look for instances of Adobe Installer 2.0. Have them removed. Optionally, have it remove other Adobe stuff that may have been left over from CS4.
    f) Try to install CS4
    Note: The cleanup utilities will not remove anything physically, only clean out the installer, so they pose no danger to your system. You will only lose the ability to uninstall those programs from Add or Remove Programs.
    Mylenium

  • I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

    I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
    After +/- 10 to 15min my connection is gone.
    Does anyone have a sollution?

    Lots of people are having the same problem, you're not the only one, belieeeeve me.
    Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
    It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
    So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now.  I already posted  a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
    i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
    Site:
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

  • Bought snow leopard 10.6.3.( mac intel i3) having problems installing product. after 15mins computer freezes any ideas?, bought snow leopard 10.6.3.( mac intel i3) having problems installing product. after 15mins computer freezes any ideas?

    Hi recently bought snow leopard 10.6.3. Having problems installing. My i Mac has intel i3 and system 10.6.8 . After about 15mins the computer restarts but freezes with apple logo. Any ideas? thanks alan

    Yes, 10.6.8 update was specifically to ease the Lion installation (apart from some security updates).
    Juat log onto the App Store (Icon would be in the Dock by default) and find the download. If you're not already registered with App Store, you'll need credit card info to hand, and your Apple ID (the one you use to log in here or the iTunes Store if you use it).
    You would only need the retail SL disc if you were running 10.5.8 (Leopard) or earlier.

  • Problems installing OS  I have an iMac 21.5 (Mid-2010) and in trying to load a new hard drive, after choosing the installation disk the apple logo comes up and then stops and the keyboard and mouse goes dead.  Any help would be appreciated.  Thanks

    Problems installing OS
    I have an iMac 21.5 (mid-2010) and I'm trying to install a new hard drive.  When I choose the installation disk the Apple logo comes up and it stops there.  Then the mouse and keyboard goes dead.  I'm trying to install 10.6.  Any help would be appreciated.  Thanks

    Since you have a new hard drive, there is nothing on it, so you need to boot from an external source (and probably format the hard drive before installing an OS). Are you booting from the 10.6 install disk? Better yet - do you have a bootable backup clone or at least a Time Machine backup?

  • Error when opening itunes : iTunes has stopped working ''A problem caused the program to stop working correctly''. When I repaired damaged files the problem still exists and also after uninstalling and redownloading and installing itunes. I have windows 8

    Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
    When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
    My pc is working with windos 8.
    Is there a solution?

    Hey there Rodney274,
    It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
    Start iTunes in Safe Mode
    Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
    Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
    Click Continue.
    See if the issue you're experiencing persists in Safe Mode.
    If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • 10.6.8 update combined - problems installing

    Hi all,
    Currently having huge problems installing this update on my mac, have been trying for a couple of days now to get this machine back up and running again after I was told by the genius bar 2 years ago that after them spending nearly 900 pounds on new parts, that they "had no idea what the problem was, but could be something to do with the logic board". I finally decided to sell it, but as a parts and repair it will get £100 and fully working it could get a bit more, so it's in my interest to get it up and running again.
    I am by no means a computer expert, but I know a few things and can normally sort problems out by just simply using search, but alas I have finally been beaten, and have come here to ask for some assistance.
    After re-installing my macbook pro 3,1 (mid 2007) with it's original 10.4 tiger software probably 5 times before it worked, then moving on to 10.6 snow leopard which also took a couple of attempts, I am now completely stuck with no way to get this machine up to 10.6.8, so that I can make the jump to mountain lion. The software update program is either an absolute heap of dung, or my computer just won't have any of it. I have tried multiple solutions which I will list below:
    Using software update to install the 10.6.8 combined update - Failed
    Downloading the 10.6.8 combined update from apple support downloads - Failed
    Deleting the library/preferencecom.apple.softwareupdate etc. files - Still software update Failed
    Downloading 10.6.1 update and installing - Success after a few attempts
    Downloading 10.6.8 combined and trying again - Failed
    Downloading 10.6.2 update and installing - Failed
    Now this is where I am at. I have downloaded these files both on the macbook pro itself, and on my windows laptop - then transfering them across. I have never been more frustrated at a computer in my entire life, and am about 20 minutes away from throwing this laptop out of the window onto a poor bystander below. If anyone has any solution - (and don't say reformat and reinstall the OS - I've already tried that), then it would be greatly appreciated!
    I'll post the console message from my last install of just the 10.6.8 combined upate (without using software update) and if someone on here who can make sense of these messages can see a problem or offer a solution, then that would also be greatly appreciated, thanks!
    Console message after attempted install:
    06/03/2013 13:53:17        com.apple.ocspd[185]   dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
    06/03/2013 13:53:25 Installer[182]      <ZeroSliderSplitView: 0x106dc2c70>: the delegate <TargetSelectPage: 0x106d6d9a0> was sent -splitView:resizeSubviewsWithOldSize: and left the subview frames in an inconsistent state:
    06/03/2013 13:53:25 Installer[182]      Split view bounds: {{0, 0}, {402, 104}}
    06/03/2013 13:53:25 Installer[182]          Subview frame: {{0, 0}, {0, 32}}
    06/03/2013 13:53:25 Installer[182]          Subview frame: {{0, 0}, {402, 104}}
    06/03/2013 13:53:25 Installer[182]      The outer edges of the subview frames are supposed to line up with the split view's bounds' edges. NSSplitView is working around the problem, perhaps at the cost of more redrawing. (This message is only logged once per NSSplitView.)
    06/03/2013 13:53:27 [0x0-0x17017].com.apple.installer[182]       dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
    06/03/2013 13:53:37 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Console"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.dashboardlauncher"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.frontrowlauncher"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.exposelauncher"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.QuickTimePlayerX"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.spaceslauncher"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.appstore"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.backup.launcher"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.BluetoothFileExchange"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.PodcastCapture"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.keychainaccess"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.PhotoBooth"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.VoiceOverUtility"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Safari"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Safari"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.remoteinstallmacosx"></bundle>
    06/03/2013 13:53:38 com.apple.installd[198]      dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
    06/03/2013 13:53:50 com.apple.coreservicesd[50]      dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.dashboardlauncher"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.frontrowlauncher"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.exposelauncher"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.QuickTimePlayerX"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.spaceslauncher"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.appstore"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.backup.launcher"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.BluetoothFileExchange"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.PodcastCapture"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.keychainaccess"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.PhotoBooth"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.VoiceOverUtility"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Safari"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Safari"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Console"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.remoteinstallmacosx"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
    06/03/2013 13:53:57 Installer[182]      The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.

    There really shouldn't be any problem downloading that combo update unless you've got a very slow or flaky connection. And Windows doesn't play as well with Mac files as the Mac does with Windows files; who knows what Windows might have done to the update's file integrity.
    You might also try downloading the file using another browser such as Firefox. And when you have the updater, reboot into Safe Mode and then run the updater. That way you can be sure there isn't third party software somehow interfering with the update while it's tinkering with the guts of OS X.

  • Problems installing Adobe Air and BBC iPlayer Desktop

    Problems installing Adobe Air and BBC iPlayer Desktop
    I'm running Windows 7 32 bit on an ASUS netbook with 2mb ram. I installed both  Air 3.7 and BBC iPlayer Desktop using Google Chrome. I downloaded 3 BBC programmes. Two ran fine but the third wouldn't start and I kept getting a message to try again later. I deleted this programme and downloaded it again, with the same result.
    So I uninstalled both Air and the BBC iPlayer Desktop, the Air exe file and the two folders at the following locations:
    C:\Users\USERNAME\AppData\Roaming\Adobe\AIR\   and
    C:\Users\USERNAME\AppData\Roaming\BBCiPlayerDesktop.xxx
    Since doing this each time I try to install Air either on its own or with the BBC iPlayer software I get the message part way through installation:
    "Sorry, an error has occurred.
    An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator."
    I have run the Microsoft Fix it programme and still get the same result.
    I have tried everything on your Trouble Shooting page apart from the bit about the elevated command prompt, but as I'm the sole user and administrator, that seems unnecessary.
    I have closed Chrome and tried installation using Windows Explorer but with the same result.
    I have tried all the above with Microsoft Security Essentials running and disabled. And I have tried the same with Astrill on and off.
    I have had a response from the BBC with much the same advice as appears on your trouble shooting page.
    Here is the Air installation log, followed by the MSI log.
    [2013-04-25:06:53:46] Runtime Installer begin with version 3.7.0.1530 on
    Windows Vista x86
    [2013-04-25:06:53:46] Commandline is:
    [2013-04-25:06:53:46] No installed runtime detected
    [2013-04-25:06:53:57] Relaunching with elevation
    [2013-04-25:06:53:57] Launching subprocess with commandline c:\users
    \steve\appdata\local\temp\air79c1.tmp\adobe air installer.exe -ei
    [2013-04-25:06:54:02] Runtime Installer begin with version 3.7.0.1530 on
    Windows 7 x86
    [2013-04-25:06:54:02] Commandline is: -stdio \\.\pipe\AIR_1172_0 -ei
    [2013-04-25:06:54:02] No installed runtime detected
    [2013-04-25:06:54:03] Starting silent runtime install. Installing runtime version
    3.7.0.1530
    [2013-04-25:06:54:04] Installing msi at c:\users\steve\appdata\local\temp
    \air79c1.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:06:54:10] Error occurred during msi install operation; beginning
    rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
    text="1603" errorID=0]
    [2013-04-25:06:54:10] Rolling back install of c:\users\steve\appdata\local
    \temp\air79c1.tmp\setup.msi
    [2013-04-25:06:54:10] Rollback complete
    [2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:54:10] Runtime Installer end with exit code 7
    [2013-04-25:06:54:20] Runtime Installer end with exit code 7
    [2013-04-25:06:55:38] Runtime Installer begin with version 3.7.0.1530 on
    Windows Vista x86
    [2013-04-25:06:55:38] Commandline is:
    [2013-04-25:06:55:38] No installed runtime detected
    [2013-04-25:06:55:45] Relaunching with elevation
    [2013-04-25:06:55:45] Launching subprocess with commandline c:\users
    \steve\appdata\local\temp\air30fe.tmp\adobe air installer.exe -ei
    [2013-04-25:06:55:48] Runtime Installer begin with version 3.7.0.1530 on
    Windows Vista x86
    [2013-04-25:06:55:48] Commandline is: -stdio \\.\pipe\AIR_1264_0 -ei
    [2013-04-25:06:55:48] No installed runtime detected
    [2013-04-25:06:55:49] Starting silent runtime install. Installing runtime version
    3.7.0.1530
    [2013-04-25:06:55:51] Installing msi at c:\users\steve\appdata\local\temp
    \air30fe.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:06:55:55] Error occurred during msi install operation; beginning
    rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
    text="1603" errorID=0]
    [2013-04-25:06:55:55] Rolling back install of c:\users\steve\appdata\local
    \temp\air30fe.tmp\setup.msi
    [2013-04-25:06:55:55] Rollback complete
    [2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:55:55] Runtime Installer end with exit code 7
    [2013-04-25:06:55:59] Runtime Installer end with exit code 7
    [2013-04-25:07:05:12] Runtime Installer begin with version 3.7.0.1530 on
    Windows 7 x86
    [2013-04-25:07:05:12] Commandline is:
    [2013-04-25:07:05:12] No installed runtime detected
    [2013-04-25:07:05:18] Relaunching with elevation
    [2013-04-25:07:05:18] Launching subprocess with commandline c:\users
    \steve\appdata\local\temp\air953.tmp\adobe air installer.exe -ei
    [2013-04-25:07:05:24] Runtime Installer begin with version 3.7.0.1530 on
    Windows 7 x86
    [2013-04-25:07:05:24] Commandline is: -stdio \\.\pipe\AIR_3888_0 -ei
    [2013-04-25:07:05:24] No installed runtime detected
    [2013-04-25:07:05:24] Starting silent runtime install. Installing runtime version
    3.7.0.1530
    [2013-04-25:07:05:26] Installing msi at c:\users\steve\appdata\local\temp
    \air953.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:05:29] Error occurred during msi install operation; beginning
    rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
    text="1603" errorID=0]
    [2013-04-25:07:05:29] Rolling back install of c:\users\steve\appdata\local
    \temp\air953.tmp\setup.msi
    [2013-04-25:07:05:29] Rollback complete
    [2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:05:29] Runtime Installer end with exit code 7
    [2013-04-25:07:05:31] Runtime Installer end with exit code 7
    [2013-04-25:07:06:12] Runtime Installer begin with version 3.7.0.1530 on
    Windows Vista x86
    [2013-04-25:07:06:12] Commandline is:
    [2013-04-25:07:06:12] No installed runtime detected
    [2013-04-25:07:06:21] Relaunching with elevation
    [2013-04-25:07:06:22] Launching subprocess with commandline c:\users
    \steve\appdata\local\temp\aire916.tmp\adobe air installer.exe -ei
    [2013-04-25:07:06:32] Runtime Installer begin with version 3.7.0.1530 on
    Windows 7 x86
    [2013-04-25:07:06:32] Commandline is: -stdio \\.\pipe\AIR_5884_0 -ei
    [2013-04-25:07:06:32] No installed runtime detected
    [2013-04-25:07:06:32] Starting silent runtime install. Installing runtime version
    3.7.0.1530
    [2013-04-25:07:06:33] Installing msi at c:\users\steve\appdata\local\temp
    \aire916.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:06:37] Error occurred during msi install operation; beginning
    rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
    text="1603" errorID=0]
    [2013-04-25:07:06:37] Rolling back install of c:\users\steve\appdata\local
    \temp\aire916.tmp\setup.msi
    [2013-04-25:07:06:37] Rollback complete
    [2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:06:37] Runtime Installer end with exit code 7
    [2013-04-25:07:06:40] Runtime Installer end with exit code 7
    [2013-04-25:07:26:15] Runtime Installer begin with version 3.7.0.1530 on
    Windows Vista x86
    [2013-04-25:07:26:15] Commandline is:
    [2013-04-25:07:26:15] No installed runtime detected
    [2013-04-25:07:26:28] Relaunching with elevation
    [2013-04-25:07:26:28] Launching subprocess with commandline c:\users
    \steve\appdata\local\temp\air3063.tmp\adobe air installer.exe -ei
    [2013-04-25:07:26:37] Runtime Installer begin with version 3.7.0.1530 on
    Windows 7 x86
    [2013-04-25:07:26:37] Commandline is: -stdio \\.\pipe\AIR_2348_0 -ei
    [2013-04-25:07:26:37] No installed runtime detected
    [2013-04-25:07:26:37] Starting silent runtime install. Installing runtime version
    3.7.0.1530
    [2013-04-25:07:26:39] Installing msi at c:\users\steve\appdata\local\temp
    \air3063.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:26:48] Error occurred during msi install operation; beginning
    rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
    text="1603" errorID=0]
    [2013-04-25:07:26:48] Rolling back install of c:\users\steve\appdata\local
    \temp\air3063.tmp\setup.msi
    [2013-04-25:07:26:48] Rollback complete
    [2013-04-25:07:26:48] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:26:48] Runtime Installer end with exit code 7
    [2013-04-25:07:46:09] Runtime Installer end with exit code 7
    === Verbose logging started: 25/04/2013  08:34:51  Build type: SHIP UNICODE
    5.00.7601.00  Calling process: C:\windows\System32\msiexec.exe ===
    MSI (c) (68:6C) [08:34:51:397]: Font created.  Charset: Req=0, Ret=0, Font:
    Req=MS Shell Dlg, Ret=MS Shell Dlg
    MSI (c) (68:6C) [08:34:51:397]: Font created.  Charset: Req=0, Ret=0, Font:
    Req=MS Shell Dlg, Ret=MS Shell Dlg
    MSI (c) (68:70) [08:34:51:469]: Resetting cached policy values
    MSI (c) (68:70) [08:34:51:469]: Machine policy value 'Debug' is 0
    MSI (c) (68:70) [08:34:51:469]: ******* RunEngine:
               ******* Product: C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (68:70) [08:34:51:473]: Machine policy value 'DisableUserInstalls' is 0
    MSI (c) (68:70) [08:34:51:653]: SOFTWARE RESTRICTION POLICY: Verifying
    package --> 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi' against
    software restriction policy
    MSI (c) (68:70) [08:34:51:654]: SOFTWARE RESTRICTION POLICY: C:\Users
    \Steve\Downloads\MicrosoftFixit50381.msi has a digital signature
    MSI (c) (68:70) [08:34:51:966]: SOFTWARE RESTRICTION POLICY: C:\Users
    \Steve\Downloads\MicrosoftFixit50381.msi is permitted to run at the
    'unrestricted' authorization level.
    MSI (c) (68:70) [08:34:51:986]: Cloaking enabled.
    MSI (c) (68:70) [08:34:51:986]: Attempting to enable all disabled privileges
    before calling Install on Server
    MSI (c) (68:70) [08:34:52:001]: End dialog not enabled
    MSI (c) (68:70) [08:34:52:001]: Original package ==> C:\Users\Steve
    \Downloads\MicrosoftFixit50381.msi
    MSI (c) (68:70) [08:34:52:001]: Package we're running from ==> C:\Users
    \Steve\Downloads\MicrosoftFixit50381.msi
    MSI (c) (68:70) [08:34:52:010]: APPCOMPAT: Compatibility mode property
    overrides found.
    MSI (c) (68:70) [08:34:52:012]: APPCOMPAT: looking for appcompat database
    entry with ProductCode '{55D13F49-FCB8-4892-8266-05D373FCAA61}'.
    MSI (c) (68:70) [08:34:52:012]: APPCOMPAT: no matching ProductCode found
    in database.
    MSI (c) (68:70) [08:34:52:041]: MSCOREE not loaded loading copy from
    system32
    MSI (c) (68:70) [08:34:52:063]: Machine policy value 'TransformsSecure' is 0
    MSI (c) (68:70) [08:34:52:063]: User policy value 'TransformsAtSource' is 0
    MSI (c) (68:70) [08:34:52:064]: Note: 1: 2262 2: File 3: -2147287038
    MSI (c) (68:70) [08:34:52:064]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
    MSI (c) (68:70) [08:34:52:065]: Machine policy value 'DisablePatch' is 0
    MSI (c) (68:70) [08:34:52:065]: Machine policy value 'AllowLockdownPatch' is
    0
    MSI (c) (68:70) [08:34:52:066]: Machine policy value 'DisableMsi' is 0
    MSI (c) (68:70) [08:34:52:066]: Machine policy value 'AlwaysInstallElevated' is
    0
    MSI (c) (68:70) [08:34:52:066]: User policy value 'AlwaysInstallElevated' is 0
    MSI (c) (68:70) [08:34:52:066]: Running product '{55D13F49-FCB8-4892-
    8266-05D373FCAA61}' with user privileges: It's not assigned.
    MSI (c) (68:70) [08:34:52:067]: Machine policy value 'DisableLUAPatching' is 0
    MSI (c) (68:70) [08:34:52:067]: Machine policy value
    'DisableFlyWeightPatching' is 0
    MSI (c) (68:70) [08:34:52:068]: Enabling baseline caching for this transaction
    since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor
    update patch is active
    MSI (c) (68:70) [08:34:52:071]: APPCOMPAT: looking for appcompat database
    entry with ProductCode '{55D13F49-FCB8-4892-8266-05D373FCAA61}'.
    MSI (c) (68:70) [08:34:52:072]: APPCOMPAT: no matching ProductCode found
    in database.
    MSI (c) (68:70) [08:34:52:072]: Transforms are not secure.
    MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding MsiLogFileLocation
    property. Its value is 'C:\Users\Steve\AppData\Local\Temp\MSIa5745.LOG'.
    MSI (c) (68:70) [08:34:52:073]: Command Line: CURRENTDIRECTORY=C:\Users
    \Steve\Downloads CLIENTUILEVEL=0 CLIENTPROCESSID=9576
    MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding PackageCode
    property. Its value is '{1C7C3009-013E-4A16-9A0F-0000FB80A613}'.
    MSI (c) (68:70) [08:34:52:073]: Product Code passed to Engine.Initialize:        
    MSI (c) (68:70) [08:34:52:073]: Product Code from property table before
    transforms: '{55D13F49-FCB8-4892-8266-05D373FCAA61}'
    MSI (c) (68:70) [08:34:52:073]: Product Code from property table after
    transforms:  '{55D13F49-FCB8-4892-8266-05D373FCAA61}'
    MSI (c) (68:70) [08:34:52:073]: Product not registered: beginning first-time
    install
    MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding ProductState
    property. Its value is '-1'.
    MSI (c) (68:70) [08:34:52:073]: Entering
    CMsiConfigurationManager::SetLastUsedSource.
    MSI (c) (68:70) [08:34:52:073]: User policy value 'SearchOrder' is 'nmu'
    MSI (c) (68:70) [08:34:52:073]: Adding new sources is allowed.
    MSI (c) (68:70) [08:34:52:074]: PROPERTY CHANGE: Adding
    PackagecodeChanging property. Its value is '1'.
    MSI (c) (68:70) [08:34:52:074]: Package name extracted from package path:
    'MicrosoftFixit50381.msi'
    MSI (c) (68:70) [08:34:52:075]: Package to be registered:
    'MicrosoftFixit50381.msi'
    MSI (c) (68:70) [08:34:52:075]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (c) (68:70) [08:34:52:078]: Note: 1: 2262 2: AdminProperties 3: -
    2147287038
    MSI (c) (68:70) [08:34:52:078]: Machine policy value 'AlwaysInstallElevated' is
    0
    MSI (c) (68:70) [08:34:52:078]: User policy value 'AlwaysInstallElevated' is 0
    MSI (c) (68:70) [08:34:52:079]: Running product '{55D13F49-FCB8-4892-
    8266-05D373FCAA61}' with user privileges: It's not assigned.
    MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding
    CURRENTDIRECTORY property. Its value is 'C:\Users\Steve\Downloads'.
    MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding CLIENTUILEVEL
    property. Its value is '0'.
    MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding CLIENTPROCESSID
    property. Its value is '9576'.
    MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding
    MsiSystemRebootPending property. Its value is '1'.
    MSI (c) (68:70) [08:34:52:079]: TRANSFORMS property is now:
    MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding VersionDatabase
    property. Its value is '200'.
    MSI (c) (68:70) [08:34:52:081]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming
    MSI (c) (68:70) [08:34:52:082]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\Favorites
    MSI (c) (68:70) [08:34:52:084]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Network Shortcuts
    MSI (c) (68:70) [08:34:52:085]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\Documents
    MSI (c) (68:70) [08:34:52:086]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
    MSI (c) (68:70) [08:34:52:088]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Recent
    MSI (c) (68:70) [08:34:52:089]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\SendTo
    MSI (c) (68:70) [08:34:52:091]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Templates
    MSI (c) (68:70) [08:34:52:092]: SHELL32::SHGetFolderPath returned: C:
    \ProgramData
    MSI (c) (68:70) [08:34:52:093]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Local
    MSI (c) (68:70) [08:34:52:094]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\Pictures
    MSI (c) (68:70) [08:34:52:097]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    \Administrative Tools
    MSI (c) (68:70) [08:34:52:098]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    \Startup
    MSI (c) (68:70) [08:34:52:099]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    MSI (c) (68:70) [08:34:52:101]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu
    MSI (c) (68:70) [08:34:52:102]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\Desktop
    MSI (c) (68:70) [08:34:52:104]: SHELL32::SHGetFolderPath returned: C:
    \ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (c) (68:70) [08:34:52:106]: SHELL32::SHGetFolderPath returned: C:
    \ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (c) (68:70) [08:34:52:106]: SHELL32::SHGetFolderPath returned: C:
    \ProgramData\Microsoft\Windows\Start Menu\Programs
    MSI (c) (68:70) [08:34:52:107]: SHELL32::SHGetFolderPath returned: C:
    \ProgramData\Microsoft\Windows\Start Menu
    MSI (c) (68:70) [08:34:52:109]: SHELL32::SHGetFolderPath returned: C:
    \Users\Public\Desktop
    MSI (c) (68:70) [08:34:52:113]: SHELL32::SHGetFolderPath returned: C:
    \windows\Fonts
    MSI (c) (68:70) [08:34:52:115]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans
    Serif 4: 0 5: 16
    MSI (c) (68:70) [08:34:52:147]: MSI_LUA: Setting AdminUser property to 1
    because this is the client or the user has already permitted elevation
    MSI (c) (68:70) [08:34:52:147]: PROPERTY CHANGE: Adding AdminUser
    property. Its value is '1'.
    MSI (c) (68:70) [08:34:52:147]: PROPERTY CHANGE: Adding Privileged
    property. Its value is '1'.
    MSI (c) (68:70) [08:34:52:148]: Note: 1: 1402 2: HKEY_CURRENT_USER
    \Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (c) (68:70) [08:34:52:148]: PROPERTY CHANGE: Adding USERNAME
    property. Its value is 'Steve'.
    MSI (c) (68:70) [08:34:52:149]: Note: 1: 1402 2: HKEY_CURRENT_USER
    \Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding DATABASE
    property. Its value is 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi'.
    MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding OriginalDatabase
    property. Its value is 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi'.
    MSI (c) (68:70) [08:34:52:149]: Machine policy value 'MsiDisableEmbeddedUI' is
    0
    MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding SourceDir
    property. Its value is 'C:\Users\Steve\Downloads\'.
    MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding SOURCEDIR
    property. Its value is 'C:\Users\Steve\Downloads\'.
    MSI (c) (68:6C) [08:34:52:153]: PROPERTY CHANGE: Adding VersionHandler
    property. Its value is '5.00'.
    === Logging started: 25/04/2013  08:34:52 ===
    MSI (c) (68:70) [08:34:52:171]: Note: 1: 2262 2: PatchPackage 3: -
    2147287038
    MSI (c) (68:70) [08:34:52:172]: Machine policy value 'DisableRollback' is 0
    MSI (c) (68:70) [08:34:52:172]: User policy value 'DisableRollback' is 0
    MSI (c) (68:70) [08:34:52:172]: PROPERTY CHANGE: Adding UILevel property.
    Its value is '5'.
    MSI (c) (68:70) [08:34:52:172]: Note: 1: 2262 2: Font 3: -2147287038
    MSI (c) (68:70) [08:34:52:174]: PROPERTY CHANGE: Adding ACTION property.
    Its value is 'INSTALL'.
    MSI (c) (68:70) [08:34:52:174]: Doing action: INSTALL
    Action 08:34:52: INSTALL.
    Action start 08:34:52: INSTALL.
    MSI (c) (68:70) [08:34:52:176]: UI Sequence table 'InstallUISequence' is
    present and populated.
    MSI (c) (68:70) [08:34:52:176]: Running UISequence
    MSI (c) (68:70) [08:34:52:176]: PROPERTY CHANGE: Adding EXECUTEACTION
    property. Its value is 'INSTALL'.
    MSI (c) (68:70) [08:34:52:176]: Doing action: Milestone_ERRCA_UIAN726
    Action 08:34:52: Milestone_ERRCA_UIAN726.
    Action start 08:34:52: Milestone_ERRCA_UIAN726.
    MSI (c) (68:70) [08:34:52:177]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'Milestone_ERRCA_UIAN726'
    MSI (c) (68:70) [08:34:52:178]: PROPERTY CHANGE: Adding Milestone
    property. Its value is 'ERRCA_UIANDADVERTISED'.
    Action ended 08:34:52: Milestone_ERRCA_UIAN726. Return value 1.
    MSI (c) (68:70) [08:34:52:178]: Skipping action: ERRCA_UIANDADVERTISED
    (condition is false)
    MSI (c) (68:70) [08:34:52:178]: Doing action: Milestone_AppSearch122
    Action 08:34:52: Milestone_AppSearch122.
    Action start 08:34:52: Milestone_AppSearch122.
    MSI (c) (68:70) [08:34:52:180]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'Milestone_AppSearch122'
    MSI (c) (68:70) [08:34:52:180]: PROPERTY CHANGE: Modifying Milestone
    property. Its current value is 'ERRCA_UIANDADVERTISED'. Its new value:
    'AppSearch'.
    Action ended 08:34:52: Milestone_AppSearch122. Return value 1.
    MSI (c) (68:70) [08:34:52:181]: Doing action: AppSearch
    Action 08:34:52: AppSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:52: AppSearch.
    MSI (c) (68:70) [08:34:52:182]: Note: 1: 2262 2: AppSearch 3: -2147287038
    Action ended 08:34:52: AppSearch. Return value 1.
    MSI (c) (68:70) [08:34:52:183]: Doing action: FindRelatedProducts
    Action 08:34:52: FindRelatedProducts. {\FinalUIFont}
    [PROGRESS_RESTORE_TXT]
    Action start 08:34:52: FindRelatedProducts.
    Action ended 08:34:52: FindRelatedProducts. Return value 1.
    MSI (c) (68:70) [08:34:52:185]: Doing action: Milestone_EulaForm201
    Action 08:34:52: Milestone_EulaForm201.
    Action start 08:34:52: Milestone_EulaForm201.
    MSI (c) (68:70) [08:34:52:186]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'Milestone_EulaForm201'
    MSI (c) (68:70) [08:34:52:187]: PROPERTY CHANGE: Modifying Milestone
    property. Its current value is 'AppSearch'. Its new value: 'EulaForm'.
    Action ended 08:34:52: Milestone_EulaForm201. Return value 1.
    MSI (c) (68:70) [08:34:52:187]: Doing action: EulaForm
    Action 08:34:52: EulaForm.
    Action start 08:34:52: EulaForm.
    MSI (c) (68:70) [08:34:52:193]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'EulaForm'
    MSI (c) (68:6C) [08:34:52:205]: Note: 1: 2262 2: Error 3: -2147287038
    Info 2898.For VSI_MS_Sans_Serif13.0_0_0 textstyle, the system created a 'MS
    Sans Serif' font, in 0 character set, of 13 pixels height.
    MSI (c) (68:6C) [08:34:52:221]: Note: 1: 2262 2: Error 3: -2147287038
    Info 2898.For VsdDefaultUIFont.524F4245_5254_5341_4C45_534153783400
    textstyle, the system created a 'MS Sans Serif' font, in 0 character set, of 13
    pixels height.
    MSI (c) (68:6C) [08:34:52:225]: Note: 1: 2262 2: Error 3: -2147287038
    Info 2898.For VSI_MS_Sans_Serif16.0_1_0 textstyle, the system created a 'MS
    Sans Serif' font, in 0 character set, of 20 pixels height.
    MSI (c) (68:6C) [08:34:52:301]: Note: 1: 2262 2: CheckBox 3: -2147287038
    Action 08:34:52: EulaForm. Dialog created
    MSI (c) (68:10) [08:34:52:312]: Note: 1: 2731 2: 0
    MSI (c) (68:6C) [08:34:55:670]: PROPERTY CHANGE: Adding EulaForm_Property
    property. Its value is '1'.
    Action ended 08:34:56: EulaForm. Return value 1.
    MSI (c) (68:70) [08:34:56:881]: Doing action: EULAACCEPTED_ACTION
    Action 08:34:56: EULAACCEPTED_ACTION.
    Action start 08:34:56: EULAACCEPTED_ACTION.
    MSI (c) (68:70) [08:34:56:883]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'EULAACCEPTED_ACTION'
    MSI (c) (68:70) [08:34:56:883]: PROPERTY CHANGE: Adding EULAACCEPTED
    property. Its value is '1'.
    Action ended 08:34:56: EULAACCEPTED_ACTION. Return value 1.
    MSI (c) (68:70) [08:34:56:884]: Doing action: Milestone_LaunchCond24
    Action 08:34:56: Milestone_LaunchCond24.
    Action start 08:34:56: Milestone_LaunchCond24.
    MSI (c) (68:70) [08:34:56:886]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'Milestone_LaunchCond24'
    MSI (c) (68:70) [08:34:56:887]: PROPERTY CHANGE: Modifying Milestone
    property. Its current value is 'EulaForm'. Its new value: 'LaunchConditions'.
    Action ended 08:34:56: Milestone_LaunchCond24. Return value 1.
    MSI (c) (68:70) [08:34:56:889]: Doing action: LaunchConditions
    Action 08:34:56: LaunchConditions. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: LaunchConditions.
    Action ended 08:34:56: LaunchConditions. Return value 1.
    MSI (c) (68:70) [08:34:56:891]: Doing action: CCPSearch
    Action 08:34:56: CCPSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: CCPSearch.
    MSI (c) (68:70) [08:34:56:892]: Note: 1: 2262 2: CCPSearch 3: -2147287038
    Action ended 08:34:56: CCPSearch. Return value 1.
    MSI (c) (68:70) [08:34:56:892]: Doing action: RMCCPSearch
    Action 08:34:56: RMCCPSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: RMCCPSearch.
    MSI (c) (68:70) [08:34:56:893]: Note: 1: 2262 2: CCPSearch 3: -2147287038
    Action ended 08:34:56: RMCCPSearch. Return value 0.
    MSI (c) (68:70) [08:34:56:894]: Doing action: ValidateProductID
    Action 08:34:56: ValidateProductID. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: ValidateProductID.
    Action ended 08:34:56: ValidateProductID. Return value 1.
    MSI (c) (68:70) [08:34:56:895]: Doing action: Milestone_DIRCA_TARG947
    Action 08:34:56: Milestone_DIRCA_TARG947.
    Action start 08:34:56: Milestone_DIRCA_TARG947.
    MSI (c) (68:70) [08:34:56:897]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'Milestone_DIRCA_TARG947'
    MSI (c) (68:70) [08:34:56:897]: PROPERTY CHANGE: Modifying Milestone
    property. Its current value is 'LaunchConditions'. Its new value:
    'DIRCA_TARGETDIR'.
    Action ended 08:34:56: Milestone_DIRCA_TARG947. Return value 1.
    MSI (c) (68:70) [08:34:56:897]: Doing action: DIRCA_TARGETDIR
    Action 08:34:56: DIRCA_TARGETDIR. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: DIRCA_TARGETDIR.
    MSI (c) (68:70) [08:34:56:899]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'DIRCA_TARGETDIR'
    MSI (c) (68:70) [08:34:56:900]: PROPERTY CHANGE: Adding TARGETDIR
    property. Its value is 'C:\Program Files\Microsoft\Microsoft Fix it 50381'.
    Action ended 08:34:56: DIRCA_TARGETDIR. Return value 1.
    MSI (c) (68:70) [08:34:56:900]: Doing action: CostInitialize
    Action 08:34:56: CostInitialize. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: CostInitialize.
    MSI (c) (68:70) [08:34:56:901]: Machine policy value 'MaxPatchCacheSize' is
    10
    MSI (c) (68:70) [08:34:56:901]: Baseline: Sorting baselines for {55D13F49-
    FCB8-4892-8266-05D373FCAA61}.
    MSI (c) (68:70) [08:34:56:901]: Baseline: New baseline 2.1.3 from transaction.
    MSI (c) (68:70) [08:34:56:902]: Baseline: Sorted order Native: Order 0.
    MSI (c) (68:70) [08:34:56:902]: Baseline Data Table:
    MSI (c) (68:70) [08:34:56:902]: ProductCode: {55D13F49-FCB8-4892-8266-
    05D373FCAA61} Version: 2.1.3 Attributes: 0 PatchId: Native BaselineId: -
    2147483648 Order: 0
    MSI (c) (68:70) [08:34:56:902]: Baseline File Table:
    MSI (c) (68:70) [08:34:56:912]: PROPERTY CHANGE: Adding ROOTDRIVE
    property. Its value is 'D:\'.
    MSI (c) (68:70) [08:34:56:913]: PROPERTY CHANGE: Adding CostingComplete
    property. Its value is '0'.
    Action ended 08:34:56: CostInitialize. Return value 1.
    MSI (c) (68:70) [08:34:56:914]: Doing action: FileCost
    Action 08:34:56: FileCost. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: FileCost.
    MSI (c) (68:70) [08:34:56:915]: Note: 1: 2262 2: MsiAssembly 3: -2147287038
    MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: RemoveFile 3: -2147287038
    MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: MoveFile 3: -2147287038
    MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: DuplicateFile 3: -2147287038
    MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: Shortcut 3: -2147287038
    MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: TypeLib 3: -2147287038
    MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: IniFile 3: -2147287038
    MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: ReserveCost 3: -2147287038
    Action ended 08:34:56: FileCost. Return value 1.
    MSI (c) (68:70) [08:34:56:917]: Doing action: IsolateComponents
    Action 08:34:56: IsolateComponents. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: IsolateComponents.
    MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: BindImage 3: -2147287038
    MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: IsolatedComponent 3: -
    2147287038
    MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: Patch 3: -2147287038
    Action ended 08:34:56: IsolateComponents. Return value 1.
    MSI (c) (68:70) [08:34:56:920]: Skipping action: ResumeForm (condition is
    false)
    MSI (c) (68:70) [08:34:56:920]: Skipping action: MaintenanceForm (condition
    is false)
    MSI (c) (68:70) [08:34:56:920]: Doing action: CostFinalize
    Action 08:34:56: CostFinalize. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: CostFinalize.
    MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding OutOfDiskSpace
    property. Its value is '0'.
    MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
    OutOfNoRbDiskSpace property. Its value is '0'.
    MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
    PrimaryVolumeSpaceAvailable property. Its value is '0'.
    MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
    PrimaryVolumeSpaceRequired property. Its value is '0'.
    MSI (c) (68:70) [08:34:56:921]: PROPERTY CHANGE: Adding
    PrimaryVolumeSpaceRemaining property. Its value is '0'.
    MSI (c) (68:70) [08:34:56:921]: Note: 1: 2262 2: Patch 3: -2147287038
    MSI (c) (68:70) [08:34:56:921]: Note: 1: 2262 2: Condition 3: -2147287038
    MSI (c) (68:70) [08:34:56:923]: PROPERTY CHANGE: Modifying TARGETDIR
    property. Its current value is 'C:\Program Files\Microsoft\Microsoft Fix it 50381'.
    Its new value: 'C:\Program Files\Microsoft\Microsoft Fix it 50381\'.
    MSI (c) (68:70) [08:34:56:923]: Target path resolution complete. Dumping
    Directory table...
    MSI (c) (68:70) [08:34:56:923]: Note: target paths subject to change (via
    custom actions or browsing)
    MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: TARGETDIR          , Object: C:
    \Program Files\Microsoft\Microsoft Fix it 50381\
    MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: WindowsFolder          , Object: C:
    \windows\
    MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: ProgramMenuFolder          ,
    Object: C:\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu
    \Programs\
    MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: DesktopFolder          , Object: C:
    \Users\Steve\Desktop\
    MSI (c) (68:70) [08:34:56:923]: PROPERTY CHANGE: Adding INSTALLLEVEL
    property. Its value is '1'.
    MSI (c) (68:70) [08:34:56:923]: Note: 1: 2262 2: IsolatedComponent 3: -
    2147287038
    MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: BindImage 3: -2147287038
    MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: Patch 3: -2147287038
    MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: RemoveFile 3: -2147287038
    Action ended 08:34:56: CostFinalize. Return value 1.
    MSI (c) (68:70) [08:34:56:925]: Doing action: ProgressForm
    Action 08:34:56: ProgressForm.
    Action start 08:34:56: ProgressForm.
    MSI (c) (68:70) [08:34:56:926]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'ProgressForm'
    MSI (c) (68:6C) [08:34:56:938]: Note: 1: 2262 2: Error 3: -2147287038
    DEBUG: Error 2826:  Control Line1 on dialog ProgressForm extends beyond the
    boundaries of the dialog to the right by 3 pixels
    The installer has encountered an unexpected error installing this package. This
    may indicate a problem with this package. The error code is 2826. The
    arguments are: ProgressForm, Line1, to the right
    MSI (c) (68:6C) [08:34:56:941]: Note: 1: 2262 2: Error 3: -2147287038
    DEBUG: Error 2826:  Control Line2 on dialog ProgressForm extends beyond the
    boundaries of the dialog to the right by 3 pixels
    The installer has encountered an unexpected error installing this package. This
    may indicate a problem with this package. The error code is 2826. The
    arguments are: ProgressForm, Line2, to the right
    MSI (c) (68:6C) [08:34:56:948]: Note: 1: 2262 2: Error 3: -2147287038
    DEBUG: Error 2826:  Control BannerBmp on dialog ProgressForm extends beyond
    the boundaries of the dialog to the right by 3 pixels
    The installer has encountered an unexpected error installing this package. This
    may indicate a problem with this package. The error code is 2826. The
    arguments are: ProgressForm, BannerBmp, to the right
    Action 08:34:56: ProgressForm. Dialog created
    Action ended 08:34:57: ProgressForm. Return value 1.
    MSI (c) (68:70) [08:34:57:011]: Doing action: ExecuteAction
    Action 08:34:57: ExecuteAction. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    MSI (c) (68:6C) [08:34:57:012]: Note: 1: 2262 2: Error 3: -2147287038
    Info 2898.For FinalUIFont textstyle, the system created a 'Arial' font, in 0
    character set, of 15 pixels height.
    Action start 08:34:57: ExecuteAction.
    MSI (c) (68:70) [08:34:57:035]: PROPERTY CHANGE: Adding SECONDSEQUENCE
    property. Its value is '1'.
    MSI (c) (68:70) [08:34:57:043]: Grabbed execution mutex.
    MSI (c) (68:70) [08:34:57:043]: Incrementing counter to disable shutdown.
    Counter after increment: 0
    MSI (c) (68:70) [08:34:57:045]: Switching to server: TARGETDIR="C:\Program
    Files\Microsoft\Microsoft Fix it 50381\" EULAACCEPTED="1"
    CURRENTDIRECTORY="C:\Users\Steve\Downloads" CLIENTUILEVEL="0"
    CLIENTPROCESSID="9576" USERNAME="Steve" SOURCEDIR="C:\Users\Steve
    \Downloads\" ACTION="INSTALL" EXECUTEACTION="INSTALL" ROOTDRIVE="D:\"
    INSTALLLEVEL="1" SECONDSEQUENCE="1"  ADDLOCAL=DefaultFeature 
    MSI (s) (C8:D4) [08:34:57:086]: Running installation inside multi-package
    transaction C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
    MSI (s) (C8:D4) [08:34:57:086]: Grabbed execution mutex.
    MSI (s) (C8:BC) [08:34:57:092]: Resetting cached policy values
    MSI (s) (C8:BC) [08:34:57:092]: Machine policy value 'Debug' is 0
    MSI (s) (C8:BC) [08:34:57:092]: ******* RunEngine:
               ******* Product: C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
               ******* Action: INSTALL
               ******* CommandLine: **********
    MSI (s) (C8:BC) [08:34:57:096]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (C8:BC) [08:34:57:097]: Setting cached product context: User non-
    assigned for product: 48945AC3B41AEF24F91FE79A10157D52
    MSI (s) (C8:BC) [08:34:57:097]: Using cached product context: User non-
    assigned for product: 48945AC3B41AEF24F91FE79A10157D52
    MSI (s) (C8:BC) [08:34:57:099]: Setting cached product context: User non-
    assigned for product: 6BBFDF96D153C8B4988D68D79C0D2A4A
    MSI (s) (C8:BC) [08:34:57:099]: Using cached product context: User non-
    assigned for product: 6BBFDF96D153C8B4988D68D79C0D2A4A
    MSI (s) (C8:BC) [08:34:57:101]: Setting cached product context: User non-
    assigned for product: CAB1E4D953B64F542BD433D9568A0AB6
    MSI (s) (C8:BC) [08:34:57:101]: Using cached product context: User non-
    assigned for product: CAB1E4D953B64F542BD433D9568A0AB6
    MSI (s) (C8:BC) [08:34:57:103]: Setting cached product context: User non-
    assigned for product: DED5B648C8CDA1E45B4BF9B5930AACEC
    MSI (s) (C8:BC) [08:34:57:103]: Using cached product context: User non-
    assigned for product: DED5B648C8CDA1E45B4BF9B5930AACEC
    MSI (s) (C8:BC) [08:34:57:104]: Setting cached product context: User non-
    assigned for product: E2EE924EC67B3554B8404B55780FF01D
    MSI (s) (C8:BC) [08:34:57:104]: Using cached product context: User non-
    assigned for product: E2EE924EC67B3554B8404B55780FF01D
    MSI (s) (C8:BC) [08:34:57:106]: Setting cached product context: machine
    assigned for product: 00002109001001400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:106]: Using cached product context: machine
    assigned for product: 00002109001001400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:107]: Setting cached product context: machine
    assigned for product: 00002109001031400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:108]: Using cached product context: machine
    assigned for product: 00002109001031400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:110]: Setting cached product context: machine
    assigned for product: 00002109001070400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:110]: Using cached product context: machine
    assigned for product: 00002109001070400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:111]: Setting cached product context: machine
    assigned for product: 000021090010C0400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:111]: Using cached product context: machine

    Hi Chris,
    The AIR installation log is in my original post - about 12 paras down but here is is:
    [2013-04-25:06:53:46] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
    [2013-04-25:06:53:46] Commandline is:
    [2013-04-25:06:53:46] No installed runtime detected
    [2013-04-25:06:53:57] Relaunching with elevation
    [2013-04-25:06:53:57] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air79c1.tmp\adobe air installer.exe -ei
    [2013-04-25:06:54:02] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
    [2013-04-25:06:54:02] Commandline is: -stdio \\.\pipe\AIR_1172_0 -ei
    [2013-04-25:06:54:02] No installed runtime detected
    [2013-04-25:06:54:03] Starting silent runtime install. Installing runtime version 3.7.0.1530
    [2013-04-25:06:54:04] Installing msi at c:\users\steve\appdata\local\temp\air79c1.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:06:54:10] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:54:10] Rolling back install of c:\users\steve\appdata\local\temp\air79c1.tmp\setup.msi
    [2013-04-25:06:54:10] Rollback complete
    [2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:54:10] Runtime Installer end with exit code 7
    [2013-04-25:06:54:20] Runtime Installer end with exit code 7
    [2013-04-25:06:55:38] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
    [2013-04-25:06:55:38] Commandline is:
    [2013-04-25:06:55:38] No installed runtime detected
    [2013-04-25:06:55:45] Relaunching with elevation
    [2013-04-25:06:55:45] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air30fe.tmp\adobe air installer.exe -ei
    [2013-04-25:06:55:48] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
    [2013-04-25:06:55:48] Commandline is: -stdio \\.\pipe\AIR_1264_0 -ei
    [2013-04-25:06:55:48] No installed runtime detected
    [2013-04-25:06:55:49] Starting silent runtime install. Installing runtime version 3.7.0.1530
    [2013-04-25:06:55:51] Installing msi at c:\users\steve\appdata\local\temp\air30fe.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:06:55:55] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:55:55] Rolling back install of c:\users\steve\appdata\local\temp\air30fe.tmp\setup.msi
    [2013-04-25:06:55:55] Rollback complete
    [2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:55:55] Runtime Installer end with exit code 7
    [2013-04-25:06:55:59] Runtime Installer end with exit code 7
    [2013-04-25:07:05:12] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
    [2013-04-25:07:05:12] Commandline is:
    [2013-04-25:07:05:12] No installed runtime detected
    [2013-04-25:07:05:18] Relaunching with elevation
    [2013-04-25:07:05:18] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air953.tmp\adobe air installer.exe -ei
    [2013-04-25:07:05:24] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
    [2013-04-25:07:05:24] Commandline is: -stdio \\.\pipe\AIR_3888_0 -ei
    [2013-04-25:07:05:24] No installed runtime detected
    [2013-04-25:07:05:24] Starting silent runtime install. Installing runtime version 3.7.0.1530
    [2013-04-25:07:05:26] Installing msi at c:\users\steve\appdata\local\temp\air953.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:05:29] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:05:29] Rolling back install of c:\users\steve\appdata\local\temp\air953.tmp\setup.msi
    [2013-04-25:07:05:29] Rollback complete
    [2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:05:29] Runtime Installer end with exit code 7
    [2013-04-25:07:05:31] Runtime Installer end with exit code 7
    [2013-04-25:07:06:12] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
    [2013-04-25:07:06:12] Commandline is:
    [2013-04-25:07:06:12] No installed runtime detected
    [2013-04-25:07:06:21] Relaunching with elevation
    [2013-04-25:07:06:22] Launching subprocess with commandline c:\users\steve\appdata\local\temp\aire916.tmp\adobe air installer.exe -ei
    [2013-04-25:07:06:32] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
    [2013-04-25:07:06:32] Commandline is: -stdio \\.\pipe\AIR_5884_0 -ei
    [2013-04-25:07:06:32] No installed runtime detected
    [2013-04-25:07:06:32] Starting silent runtime install. Installing runtime version 3.7.0.1530
    [2013-04-25:07:06:33] Installing msi at c:\users\steve\appdata\local\temp\aire916.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:06:37] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:06:37] Rolling back install of c:\users\steve\appdata\local\temp\aire916.tmp\setup.msi
    [2013-04-25:07:06:37] Rollback complete
    [2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:06:37] Runtime Installer end with exit code 7
    [2013-04-25:07:06:40] Runtime Installer end with exit code 7
    [2013-04-25:07:26:15] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
    [2013-04-25:07:26:15] Commandline is:
    [2013-04-25:07:26:15] No installed runtime detected
    [2013-04-25:07:26:28] Relaunching with elevation
    [2013-04-25:07:26:28] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air3063.tmp\adobe air installer.exe -ei
    [2013-04-25:07:26:37] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
    [2013-04-25:07:26:37] Commandline is: -stdio \\.\pipe\AIR_2348_0 -ei
    [2013-04-25:07:26:37] No installed runtime detected
    [2013-04-25:07:26:37] Starting silent runtime install. Installing runtime version 3.7.0.1530
    [2013-04-25:07:26:39] Installing msi at c:\users\steve\appdata\local\temp\air3063.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:26:48] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:26:48] Rolling back install of c:\users\steve\appdata\local\temp\air3063.tmp\setup.msi
    [2013-04-25:07:26:48] Rollback complete
    [2013-04-25:07:26:48] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:26:48] Runtime Installer end with exit code 7
    [2013-04-25:07:46:09] Runtime Installer end with exit code 7

  • Unable to Install Office 2013 Pro and I get returned message "Couldn't Install We're sorry, we had a problem installing your office programs"

    I purchased 40 licenses of Office 2013 Pro from a vendor in the US and received 40 product keys along with the URL to download the software - 1 for each pc activation codes.  I have done a few and were all successful.  I am now trying
    install on 2 other pcs and I am having real difficulty and getting error message each time I try to install.  I am able to download the installer and copied to my desktop and when I double click to execute it, it gives me the option to run on the next
    screen.  I click on run then it gives me the message " do you want to allow the program to make changes to this computer".  When I press YES, nothing happens and minutes later, I get the flwg message everytime, "Couldn't
    install"  "We're sorry, we had a problem installing your office programs.  Is your internet connection working?  Do you have enough free space on your main hard drive?  Please try installing again after you've checked the above. 
    Go online for additional help.
    I have lots of space and my pc is Win 7 64 bit new machine.  I have connection to internet and I was able to get the others done.  What is the problem here and I have been trying to work late night hours to try to install the program and I am unable
    to successfully get it to work.  I receive the same message every time and I followed all the recommended troubleshoot steps I found on the internet.  Someone please help.  I have to install all for all the PCs we have for our organization. 
    Please respond because I am really stuck.
    Gabe

    Hi Gabe,
    First, please check the suggestion above is helpful. I also suggest you removing all version of Office and re-install Office 2013.
    We can try to run the application as an administrator and check if it works.
     1. Right click the shortcut of the application or the main application.
     2. Select properties.
     3. Select compatibility tab and select "Run this program as an administrator."
    If there is anything I can do for you about this issue, don't hesitate to tell me.
    Best regards,
    Greta Ge
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Problems installing and starting on Windows 7 64bit. error message - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes.

    Hi I'm having problems installing and starting itunes program on Windows 7 64bit. After install the following error message is flagged - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would really appreciate any pointers!

    Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.

  • Motorola Surfboard SBG6590 installation cd says "Problem installing Adobe Air"

    When I attempt to install the software which came on the installation cd for my Motorola Surfboard SBG6590, it gives the following message: "Problem installing Adobe Air. There was a problem installing Adobe Air". After I saw this message the first time, I went to Adobe's site and downloaded air from a browser and it said that air was successfully installed. When I reattempted to install the cd, it gave the same failure message about "Problem installing Adobe Air". I tried uninstalling Adobe Air and reinstalling and I still get the same problem. I have a mac OS x version 10.5.8. The version of air that I downloaded is 2.5.1 for MacOS.

    The script gives the following error: "AppleScript Error. Finder got an error: A privilege violation occurred."
    Script editor displays in the event log:
    tell application "Finder"
    do shell script "test -d /Applications/Adobe || mv /Applications/Adobe /Applications/Adobe-Backup > /dev/null 2>&1 &" with administrator privileges
    "Finder got an error: A privilege violation occurred."
    The installation script did not prompt for my administer password, so perhaps that could be the problem?
    I am unable to rename or delete a file called /Applications/Adobe, because no such file exists. This is a folder on my machine containing Acrobat.
    $ ls /Applications/Adobe*
    /Applications/Adobe:
    Acrobat.com.app Flash Player
    /Applications/Adobe Reader 9:
    Adobe Reader.app Icon? ReadMe.html
    $ ls /Applications/Utilities/Adobe*
    /Applications/Utilities/Adobe AIR Application Installer.app:
    Contents
    /Applications/Utilities/Adobe AIR Uninstaller.app:
    Contents
    /Applications/Utilities/Adobe Utilities.localized:
    Adobe Updater6
    I'm not sure why, but when I open the Console application, it busy waits and won't let me see any logs, so instead here is some relevant lines from my /var/log/system.log. Since it looks like my system cleans up this file every morning, I did a fresh uninstall of Adobe Air and reinstalled it just now:
    Dec 15 11:34:42 /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[18202]: Runtime Installer begin with version 2.5.1.17750 on Mac OS 10.5.8 x86
    Dec 15 11:34:42 /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[18202]: Commandline is: -psn_0_1560957
    Dec 15 11:34:42 /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[18202]: Installed runtime (2.5.1.17750) located at /Library/Frameworks/Adobe AIR.framework
    Dec 15 11:34:45 /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[18202]: Relaunching with elevation
    Dec 15 11:34:45 /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[18202]: Launching subprocess with commandline /Applications/Utilities/Adobe AIR Uninstaller.app -eu
    Dec 15 11:34:51 authexec[18205]: executing /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer
    Dec 15 11:34:52 /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[18205]: Runtime Installer begin with version 2.5.1.17750 on Mac OS 10.5.8 x86
    Dec 15 11:34:52 /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[18205]: Commandline is: -eu
    Dec 15 11:34:52 /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[18205]: Installed runtime (2.5.1.17750) located at /Library/Frameworks/Adobe AIR.framework
    Dec 15 11:34:52 /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[18205]: Starting runtime uninstall. Uninstalling runtime version 2.5.1.17750
    Dec 15 11:35:04 /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[18205]: Runtime Installer end with exit code 0
    Dec 15 11:35:04 /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[18202]: Elevated install completed
    Dec 15 11:35:04 /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[18202]: Runtime Installer end with exit code 0
    Dec 15 11:36:04 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18215]: Runtime Installer begin with version 2.5.1.17750 on Mac OS 10.5.8 x86
    Dec 15 11:36:05 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18215]: Commandline is: -psn_0_1581442
    Dec 15 11:36:05 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18215]: No installed runtime detected
    Dec 15 11:36:08 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18215]: Relaunching with elevation
    Dec 15 11:36:08 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18215]: Launching subprocess with commandline /Volumes/Adobe AIR 1/Adobe AIR Installer.app -ei
    Dec 15 11:36:14 authexec[18218]: executing /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer
    Dec 15 11:36:15 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18218]: Runtime Installer begin with version 2.5.1.17750 on Mac OS 10.5.8 x86
    Dec 15 11:36:15 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18218]: Commandline is: -ei
    Dec 15 11:36:15 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18218]: No installed runtime detected
    Dec 15 11:36:15 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18218]: Starting silent runtime install. Installing runtime version 2.5.1.17750
    Dec 15 11:36:58 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18218]: Registering /Applications/Utilities/Adobe AIR Application Installer.app/Contents/Info.plist
    Dec 15 11:36:58 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18218]: Launching subprocess with commandline /usr/sbin/chown -hfRP root:wheel "/Library/Frameworks/Adobe AIR.framework
    Dec 15 11:36:58 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18218]: Subprocess chown succeeded
    Dec 15 11:36:58 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18218]: Launching subprocess with commandline /usr/sbin/chown -hfRP root:wheel "/Applications/Utilities/Adobe AIR Appli
    cation Installer.app"
    Dec 15 11:36:58 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18218]: Subprocess chown succeeded
    Dec 15 11:36:58 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18218]: Launching subprocess with commandline /usr/sbin/chown -hfRP root:wheel "/Applications/Utilities/Adobe AIR Unins
    taller.app"
    Dec 15 11:36:58 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18218]: Subprocess chown succeeded
    Dec 15 11:36:59 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18218]: Runtime Installer end with exit code 0
    Dec 15 11:36:59 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18215]: Elevated install completed
    Dec 15 11:37:43 /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[18215]: Launching subprocess with commandline /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR

  • Problem Installing Developer Suite on WIndows Vista

    Hi! i'm a student of computer science, and i need to install developer suite for a proyect i need to do for one of my classes.
    I have a problem installing developer suit on Windows Vista. After i download and unzip both disk, i run the setup from the installer folder and i get an alert that says: "abnormal termination. There's been an internal error. Send the following files to the Oracle Suport Services: Unknown, Unknow, Unknow". I've also tryed with the setup from the main folder and i get the same alert. I don't know what to do, i've tryed setting the compatibility mode to windows XP, runnig as administrator, changing the performance configuration of my computer and nothing. Please help me to install the program!

    Which developer suite are you using???

  • Problem Installing Oracle Client 11g R2 64 bit on Windows 7 Enterprise 64

    Hi,
    I am having problems installing the Oracle Client 11g R2 64 bit installation on my Windows 7 64 bit Enterprise machine. The installer does all the checks successfully, it gets me to summary screen and I press finish to start the installation. It then opens the installation mask where it first says Checking whether Central Inventory is locked by another OUI session. After that it very briefly shows Central Inventory is not locked and then the window immediately dissapears with no other errors. I tried installing at my colleague's W7 Enterprise 64 machine and it behaves a little differently but with the same result. Basically on his machine it never even opens the Install mask, when pressing finish from the Summary it just disappears and never starts installation. I tried installing 11g R1 and that loads the first mask and when i press next it just dissapears. I basically need an oracle client 64 bit installation on my machine deperately. Please help. Thanks
    Alex

    One user above reported installing the 64 bit odbc drivers and then the 32 bit drivers. How did you do that? I'm a neophyte to this.
    I'm trying to get a 32 bit ODBC oracle driver to work on a server 2008 R2 machine. I downloaded the 11gR2 x64 client from oracle. The install process makes no mention of 32bit vs 64bit installation. After running the instalation I can run the ODBC administrator and generate a DSN for oracle. When I run the 32 ODBC administrator there is no oracle driver available except the microsoft driver for oracle. When I select that it says that I need to install oracle.
    I had at first tried to install 11g instant client. However that didn't work for the 2008 R2 machine. It complained about some registry error when I tried to run the ODBC install program. I need to get it to work for a customer asap.

  • Driver issue-problem installing hardware

    I installed the latest update to iTunes yesterday. Now, when I connect my IPod to my PC, I get the following error message:
    "There was a problem installing this hardware-apple IPOD USB driver-An Error Occurred During the Installation of this device. The I/O operation has been aborted because of either a thread exit or an application request."
    I have searched for an updated driver, but I keep getting the same error message as above. The iPod shows up in device manager, but with a yellow exclamation point next to it. It says "The drivers for this device are not installed. (Code 28)." I've also reinstalled the driver.cab file from my Windows installation disk, but none of this has resolved this issue.
    Any help would be greatly appreciated.

    I think I've resolved this issue. I used SYSTEM RESTORE to find a restore point from before I upgraded iTunes. When I went to start iTunes after restoration it didn't want to start, so I had to go to the Apple web site to download and reinstall iTunes. It seems to be working now though some of my music didn't initially sync from the library to my iPod because my computer wasn't "authorized" according to the error message. All I did then was attempt to play oe of the songs that wouldn't sync and I got prompted for my iTunes password, plugged that in and everything seems to have synced just fine.

  • Problem installing ActiveX viewer in Windows 7

    Hello,
    We downloaded the public beta of Windows 7 today and I am getting an error in our web application when it tries to install the Crystal Reports XI ActiveX report viewer (version 11.0.0.1424 of crviewer.dll).  IE8 will issue its normal prompt to ask you if you want to install the control, but after that, the little object image in the upper-left corner of the page turns to a red X.
    I tried using the sample code which comes with Crystal XI (SimplePreviewReport.asp in the "BeginHere" folder) and that had the same problem.  I put some debug code into SmartViewerActiveX.asp and found that I was getting an "ActiveX component can't create object" error on this line:
         Set webBroker = CreateObject("CrystalReports11.WebReportBroker.1")
    I don't think it's a security issue because I am an administrator on the machine and I didn't have any problems installing other ActiveX controls.  I tried running the web site in both the Local Intranet zone as well as the Trusted Sites zone.  I'm also thinking that the issue is more with Windows 7 than IE8 because I have IE8 Beta 2 installed on a Windows XP machine and the Crystal ActiveX viewer installs just fine there.
    Thanks in advance for any suggestions!

    XI R2 is more then an incremental update in some aspects to XI R1. They are officially versioned 11 and 11.5 and XI R2 is considered a new release. However in most aspects to a Crystal R1 customer XI R2 doesn't offer much more in functionality other than it is more up-to-date and is still receiving updates and patches.
    With out looking at Operating Systems or other factors I generally recommend R1 customers move to R2 so they are kept up-to-date. However being an new version that does mean you will need to update your projects to call the R2 runtime, and then you can use the R2 merge modules.
    As for how R2 merge modules work with Windows 7 I cannot say. We will have to wait until Windows 7 final build comes out before we will get a list of supported products on this Operating System, and this can take upwards of 3 months after the OS is released. I would hazard a guess (NOTE: GUESS is the important word here) that R1 and R2 will not be certified with Windows 7. This does not mean it will not work, but does mean it will not be tested and if errors are found that are particular to this OS they will not be fixed.
    Remember that this is just a guess, based on R2 being 3 years old and nearing end of its patch cycle and Windows 7 being at least 4 months away. However this cannot be concidered an official statement it is just my personal opinion. Enough caveats there?
    Trevor

Maybe you are looking for