Problems installing and starting on Windows 7 64bit. error message - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes.
Hi I'm having problems installing and starting itunes program on Windows 7 64bit. After install the following error message is flagged - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would really appreciate any pointers!
Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.
Similar Messages
-
When trying to sync my nano 5th Gen i got a message saying there was a problem and to try uninstalling and reinstalling. I did this step by step, but when reinstalling i was presented with this message. 'The file 'i Tunes library .itl' cannot be read because it was created by a newer version of iTunes'. Any ideas what i can doto rectify this????
ThanksIf you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic! -
I get the error message The file "iTunes Library.itl" cannot be readbecause it was created by a newer version of itunes.
I tunes will not start, so I can't deauthorize the computer and do an uninstall/reinstall.
I have no idea what this means b/c I didn't import a new library.
Any help would be appreciated.no one?
-
after I downloaded the latest itunes, I am gettingthis error.the file "i Tunes Library.itl" cannot be read because it was created by a new version of iTunes. I don't know what to do next. Please help.
LovemyiTunesSee Empty/corrupt library after upgrade/crash.
tt2 -
Anybody any ideas?
Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.
-
I just downloaded I Tunes to my new computer. I had I Tunes on old computer. When I clicked on the icon on desktop I received the following pop-up.
the file "I tunes Library .itl" cannot be read because it was created by a new version of i tunes. What does that mean?See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
I keep getting error message " the file i tunes library.itl cannot be read because it was created by a newer version of itunes.............can anyone help me please!!!!
See Empty/corrupt library after upgrade/crash. In certain cases a "corrupt" library can appear to be invalid for the current build of iTunes or trigger a "New Library" message.
tt2 -
I went through the entire uninstall process including deleting all my temp files before reinstalling.
If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic! -
version.
Help! I can't access anything. This all started because I was unable to get my ipod to play via USB in my vehicle.It reccognized it and saw the songs, but wouldn't play.
I need to get my library back!See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
I installed iTunes 64 on a Windows 7 (Home) HP Pavilion and received this error message. the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Please help!
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
Just downloaded Itunes 10.6 on windows7 64bit and now cannot open Itunes get error msg:ITunes Library.itl cannot be read because it was created by a newer version of iTunes.Tried uninstall and reinstall any help ? Thanks
Even I am facing a similar problem. Initially the iTunes worked on my windows 64bit edition. Ever since I downloaded the latest version it has stopped identifying my 4S with an error msg that asks me to download the 64bit edition. I have tried it again and again but it did not help. After unistalling and downloading again the new error msg says " the file- iTuneslibrary.itl cannot be read because it was created by a newer version of iTunes". Please help!!!!!!!
-
I just installed iTunes on my new laptop. When I click on the desktop icon I receive a pop up that says "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes". I have no idea what this means or what to do about it. I can't even find a file on my computer like the one referred to in the pop up. I am currently considering keeping my old laptop if it is the only way for me to continue to access iTunes. What should I do to fix this?
What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future. -
updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??
hello!
i have a similiar problem:
i upgraded my mac from 10.6.8 to 10.7.something recently, but i did NOT update itunes, still running version 10.4.1. now i wanted to open itunes but it tells me, that my iTunes Library.itl was created by a newer version of iTunes - which i never used!
its annoying since i dont want to be forced to download a 720MB pckage of itunes every month - even more so, if the system start "lying" to me.
or is it another problem? anyone got the same? any solution? maybe an erratic prompt?
thanks, florian -
I keep on getting the following message:
the file itunes library.itl cannot be read because it was created by a newer version of itunes
This is occurring on a Toshiba laptop running Windows 7. It appears no one has ever encounted this problem using a Windows 7 system judging by the lack of threads devoted to discussing this issue. Is this the end of the road for my participation in the Apple world, or is there a possible fix for this problem?
I run iTunes on my computer, on my iPad 2, and on my iPhone 4S.
Sincerely,
Ralph W.Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
just installed latest itunes to my laptop, and icon is on my homepage, but when i try to load it up, i get this message ,The File "itunes Library.itl" cannot be read because it was created by a newer version of itunes! Ive tried uninstalling it then installing again but nothing, ive ran scans on both itunes and quicktime to see what the problem is, and i just keep gettin this message! how do i fix this ANYONE please!
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash
Maybe you are looking for
-
I got an X-fi Fatalty ExtremeGamer card for Father's Day, and had no trouble installing it in my dual-boot (XP Pro and Vista Business) system. I downloaded the 2.5 drivers for Vista, and all was well. However, I recently got an aftermarket cooling so
-
Concatenating to a variable more than once?
Is it possible to concat to the same variable more than once? For some reason I am thinking not. I have the following: declare v_sql VARCHAR2(2000); v_sql := 'Select blah balh Where myfield in ('; if v_show1 = 1 then v_sql := v_sql || '1,' end if; if
-
Cannot drop queue objects - invalid username/password
Folks - I'm having an issue where I cannot drop the user that owns my AQ/streams objects from an 11g database. SYS@bwapepd1> drop user streams cascade; drop user streams cascade ERROR at line 1: ORA-24008: queue table STREAMS.LB_SUBS_SOURCE_QT must b
-
Hello, My company is not subscribing www.bwexpertonline.com magazine so if anybody in this forum having subscription could you please post here Here are Artical Information 1. Nathan Genez, Develop a Custom DataSource Using the Generic Extractor (BW/
-
Question about Exception stack
Hello, I get the following exception stack and it is not the first time that I get this "ClassName.<init>". What does the "init" mean? Thanks in advance, Balteo. oracle.xquery.XQException: Too many arguments for function compare [java] at