Problem inText Variable cannot replace 0calmonth in calculated keyfigure

Hi ALL,
I am facing a problem while creating text variable for calculated keyfigure saying canot find the replacement for 0calmonth, I have 5 restricted keyfigures individually created a text variable for it. and now i have created a calculated keyfigure for displaying text using same text variable .
Could you please tell me what might be the problem.How to rectify .do response urgent plz.
Thanks much.

Hi,
Please find below the code.
WHEN 'ZMON_TEXT_CE'. ---Text Variable
 DATA:text2(60),
 c_calmonth(6),
 l_month TYPE /bi0/oicalmonth,
 t_year(4),
 zktx TYPE fcktx.
 CLEAR :text2,c_calmonth,t_year.
 LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = '0CALMYL'. ------user input variable
 c_calmonth = loc_var_range-low.
 ENDLOOP.
 l_month = c_calmonth+4(2).
 t_year = c_calmonth+0(4).
 SELECT ktx FROM t247 INTO zktx WHERE spras = 'EN' AND mnr = l_month.
 ENDSELECT.
 CONCATENATE zktx '-' t_year INTO text2.
 IF text2 <> ' '.
 l_t_range-sign = 'I'.
 l_t_range-opt = 'EQ'.
 l_t_range-low = text2.
 APPEND l_t_range TO e_t_range.
 ENDIF.
Hope it helps.
Regards,
AL

Similar Messages

Problem with variable offset for 0CALMONTH

Hello Community,
I have a problem with using variables offset for time characteristic 0CALMONTH
Let's say my current query looks like this:
...................01.2006..........02.2006..........03.2006   (0CALMONTH)
Sales ..............100..................125................200   (Keyfigure)
What I want do now is to add a previous year comparison. So that it should look this way:
...................01.2006..........02.2006..........03.2006   (0CALMONTH)
Sales ..............100..................125................200   (selected months)
LY_Sales...........50..................100................100   (selected months - 12)
(LY_Sales should show figures of 01.2005, 02.2005 and 03.2006 in this example)
I used new selection for LY_Sales with variable offset for 0CALMONTH -12 but that didn't work. Figures in second line are zero. The desired figures would show up (if I expand the selected time intervall wide enough) in 01.2005, 02.2005 and 03.2005 but that's of course not what I want.
Please help if you can!
Regards,
Ulrich

Hi,
We can get an an other way by using CELL editor caoncept.
First create teh query like this:
...................01.2006..........02.2006........12.2006.....01.2005...02.20005...12.2005 Sales ..............100................125..............200.............50...........100.........100
Sales ..............100................125..............200.............50...........100.........100
Then hide the 2005 years' kf:
...................01.2006..........02.2006........12.2006
Sales ..............100................125..............200
Sales ..............100................125..............200
Though the call editor concept overwrite the second rows(selection) content with hidden columns of second row(selection) one by one .i.e first cell of 2nd row will be overwritten by 13 th cell of second column.similarly second cell of 2nd row will be overwritten by 14 th cell of second column........
First row(selection) : Cal year Charactertic with restriction 2006.
second row(selection) : Cal year Charactertic with restriction 2005.
With rgds,
Anil Kumar Sharma .P

Problem in variable with replacement path

Hi ,
I created one characteristic variable which is for manual input for date
now i have to use this variable as replace ment path but wen i create the variable with replaceent path it is not visible in the dropdow list .
Cud u tell me y its happng so.
Thnx
Points will be assigned

Hi,
There are two palces we can use replacement path as processing. One is for formula varible , which will be avialable in forumulas only. Other one is normal variable where you need to specify another query as the source while we are creating it. This second type will be avialable in the Left hand side of the screen of Query designer under your characterstic.
So I hope you created a formula varible.
With rgds,
Anil Kumar Sharma .P

Variable with Replacement Path

Hi, I have two queries. The results of the first one should be the input for the second one. E.g. the first query shows a list of personnel numbers and additional information. These personnel numbers shall be overtaken by the second query. The personnel numbers belong to "Dimensions" in the Query Designer. I alread tried to create a variable with replacement path to the dimension personnel number. I implementet this variable in both the first and the second query (under: "rows"). It`s no "Formular variable" and no "Calculated Key Figure" but a "Characteristic Value Variable" of a Dimension. The problem is now that I cannot execute any of the two queries. The error "Abort the query cannot be released for OLE DB for OLAP. System error in programm CL_RSR_REQUEST and form PREPARE_VQUERIES:INVALID_
What is my mistake? Thank you in advance! Eve

Hi Eve,
It is possible to connect the 2 queries using a Replacement Path characteristic variable. You would need to create the variable on the char whose values you want to pass from Q1 to Q2. The variable will be of type replacement path and you will need to enter the name of Q1 from which it will get the values. Make sure that you include this char in the query definition of Q1 and Q2. In Q2 you will restrict the characteristic using this variable. DO not use this variable (replacement path) in Q1.
In your query properties check if you have turned on the checkmark for Release for OLE DB for OLAP (3rd tab). If the check mark is there, then remove it.
We are using the scenario in a couple of places, and it works very well.
Hope this helps...

BPS: Value of variable Current variable cannot be determined

Hi
I have a BPS app. where I need to get current month. I've created a variable with replacement type User Exit and developed a function module that returns current month based on sy-datum.
However when I use the variable in a planning function it returns the error
'Value of variable Current Calendar year/month ( ZHCCURM ) cannot be determined' and in the diagnosis is says 'The replacement type 'user-specific values' is set up for the variable, but no values are maintained for your user ID. In addition, the indicator 'Input allowed by user' is not set for the variable. This means the variable cannot be used'
So it seems that the system think I have a variable w. replacement type 'User sepcific values'. We're on SAP NW 7.0.0 and I looked for notes but cannot find any relevant.
Anyone seen and solved this problem please let me know.

Import
I_AREA     TYPE     UPC_AREA-AREA                               Planning Area
I_VARIABLE     TYPE     UPC_VAR-VAR                               Variable
export
ETO_CHARSEL         TYPE      UPC_YTO_CHARSEL             Characteristic Selections
FUNCTION XXXX.
""Local Interface:
*" IMPORTING
*"     REFERENCE(I_AREA) TYPE UPC_AREA-AREA
*"     REFERENCE(I_VARIABLE) TYPE UPC_VAR-VAR
*" EXPORTING
*"     REFERENCE(ETO_CHARSEL) TYPE UPC_YTO_CHARSEL
DATA: wa_charsel     TYPE upc_ys_charsel,
              v_curr_month    TYPE NUMC4,
                 v_subrc          TYPE sy-subrc,
                 i_varsel          TYPE TABLE OF upc_ys_api_varsel,
            wa_varsel          TYPE upc_ys_api_varsel.
CALL FUNCTION 'API_SEMBPS_VARIABLE_GETDETAIL'
    EXPORTING
      i_area     = i_area
      i_variable = 'ZCURRYR'
    IMPORTING
      e_subrc    = v_subrc
    TABLES
      etk_varsel = i_varsel.
IF v_subrc = 0.
    READ TABLE i_varsel INTO wa_varsel INDEX 1.
    IF sy-subrc = 0.
      v_curr_month = month from system date.
      wa_charsel-chanm = '0calmonth'.
      wa_charsel-sign = 'I'.
      wa_charsel-opt = 'EQ'.
      wa_charsel-low = v_curr_month.
      APPEND wa_charsel TO eto_charsel.
    ENDIF.
ENDIF.
ENDFUNCTION.

BW 3.5 - Issue with formula variable with replacement path

Dear experts,
I'm facing an issue with formula variable with replacement path.
Just to clarify, I know replacement paths is raising a lot of questions but I've been using this functionnality extensively in the past, both in 7.0 and 3.5, so I'm not looking for basic information about how to use it.
I'm trying to setup a simple report that would show total values per plant of Purchase Order < 100
To do so I've setup a calculated key figure as follow:
VAR1 * ("PO value" < 100 ) * "PO value"
VAR1 is a formula variable with replacement path on 'purchase order' and value attribute 'constant =1'.
(The report has to show values summarized by plant but should not show the detail PO by PO, so I'm not looking at a solution based on condition)
The report as characteristic "plant" in rows and my CKF in columns.
Now let's take an example. I have 3 POs in Plant 1:
PO1 -> 150
PO2 -> 90
PO3 -> 80
Because of the variable with replacement path, the result in my query should be:
plant1 = 170 (even though characteristic "purchase order" is not in my rows, system should evaluate PO one by one and return values only for those two that are below 100).
But the result coming is 320, which is wrong.
I've done the same report on many other 3.5 systems and it worked perfectly, and I am not able to get proper support from SAP OSS who keep saying that this functionnality is not ready in 3.5 (although I've provided screenshot of this working on another 3.5 system!!! how frustrating...)
They have also pointed to problems of Before and After aggregation but that has absolutely no impact. Once again, the scenario is working perfectly on other 3.5 systems with the same query design, so i'm sure it has nothing to do with Query Designer options.
Would anyone have ever come to an equivalenet problem? I'm wondering whether the DB itself could not play a role in the variable with ref characteristic 'constant =1' ...
Any though is welcome!
thanks

Hi,
The text variable is replaced when the exact date is clear for this key figure column according to the restriction.
To achive this, please make sure that either the variable is directly restricted in the key figure selection, or that the date characteristic is in drilldown.
Regards,
Patricia

BEX 7.0: Formula variable with replacement path not working after BW Upg

Hi all,
We have a formula variable using replacement path for 0MATERIAL characteristic that is used in a calculated key figure, in order to perform conversion factor to change measure units (0MATERIAL attribute).
This was working pretty well until an upgrade from 3.5 to 7.0 EHP 1. The list that is displayed contains all key figures empty instead of the desired values.
Can anyone suggest what could be the possible reason for this?
Thanks in advance.
CCS

Hi all,
Problem solved!
The solution was based on the u201Chow to...Report Data in alternate units of measureu201D document (for 3x version) . http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b7b2aa90-0201-0010-a480-a755eeb82b6f?quicklink=index&overridelayout=true
Basically, the upgrade has override the previous changes made in the program LRRSVF20, like the "How to" document refers. Namely, the reference to YBW_AUNIT_ENHANCEMENT program.
We have carried out the changes and, apparently, the query is now working fine.
Thanks.
Best Regards,
Cátia Coelho Silva

Error while creating a Characteristic Variable with Replacement Path

Hi all,
    I am trying to create the Characteristic Variable ZVLOWDT (Low Date') with Replacement Path on characteristic ZSTARTDT (Start Date) and it gives the error 'Source to replace 'Low Date' is not defined.
   I have created a User Entry Variable VAR_DATE (Start Date) with interval like '01/01/2009 - 01/15/2009' and Customer Exit variable ZVCPDAY (does some calculation based on the input of VAR_DATE) on the same ZSTARTDT characteristic. I want to get the 01/01/2009 (lower range date of the selection) into this Characteristic Variable ZVLOWDT. We are in BI 7.0 and the following are it's properties:
General Tab:
Description: Low Date
Technical Name: ZVLOWDT
Type of Variable: Characteristic Value
Processing by: Replacement Path
Reference Characteristic: ZSTARTDT Start Date
Details Tab:
Variable Represents : Single value
Variable is: Mandatory
Variable is Ready for Input : unchecked
Replacement Path Tab: Replacement Rule
Replace Variable with : Variable
Variable : VAR_DATE
Replace with : KEY
Why I am getting this error, PLEASE ?
Thanks,
Venkat.

Hi Khaja,
   We could derive a Variable value from another Variable with out Customer Exit. There is a white paper.
First have the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next create the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we could get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error 'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path, PLEASE ?
Thanks,
Venkat.

Problem with variables in formulas when using CrystalReportViewer

Post Author: Aksu
CA Forum: Formula
Hi! I have a problem with variables in Crystal Reports formulas, when using CrystalDecisions.Windows.Forms.CrystalReportViewer class from VS2005-project. ReportViewer always gives error:*************Crystal Report Windows Forms ViewerThis field name is not known.Details: errorKindError in File C:\{dir]}\{file}.rpt:Error in formula <mCustomerAttributes>.'Dim result As String'This field name is not known.Details: errorKind ************* Report without variables works fine with Viewer and in Crystal Reports Designer report with variables works also fine. I have tried with both "formula-syntaxes" - basic and crystal. But Viewer always gives error when trying to define new variable.I think the problem might be with CR -versions, because VS-project has formerly been designed to VS2003 and CR9 or 10. Now I'm using VS2005 and CR11. Though I have changed all references to new CrystalDecisions-asseblies (Ver.11.0.3300.0), when I debug the project and checkout the Viewers ReportSources FormatEngine Shows version CR9_2.... I have no idea where it gets this version...***************DEBUG-view when Viewer is created *******************CrystalReportViewer |_ ReportSourceClassFactoryName ... , Version=11.0.3300.0 , ... |_ ReportSource |_ FormatEngine {CrystalDecisions.CrystalReports.Engine.FormatEngine} |_ ClientVersionHeader {CrystalDecisions.Shared.ReportServiceVersionHeader} |_ | version = 920 (int) |_ Static members |_ VER_CR9 = 920 (int)**************************************** Could anyone have any answers or tips for this problem? I'd really appreciate it... ---Aksu

Has anyone been able to answer this question?
I am having the same problem:
I am designing a report in Crystal Reports XI Developer that contains parameters, which are passed to a stored procedure and are also used within formulas ( in Crystal Syntax ie. {?FORMAT_ID} ) in the report itself.
I can run the report successfully in CRXI Developer. The formulas use the correct values from the parameters entered during execution and everything looks good.
I then deploy the report to Business Objects Enterprise XI. I do all of the things necessary to manage the report including setting up the proper database connection information and default parameter values.
When I run the report using the Crystal Report Viewer, I get the following error message:
Error in File Forecasting.rpt:
Error in formula <Report Format>.
'if (not isNull({?FORMAT_ID} ) ) then
This field name is not known.
Details: errorKind
This happens when I press the "Preview" button in the Manage Object dialog from Crystal or when I run the report using InfoView.
I have changed the formulas and it doesn't seem to matter what the specific content of the formula is; other than the existence of a parameter reference in the formula. If I comment out the parameter and replace it with a hard-coded value, it gets through the formula fine.
Does Business Objects Enterprise XI support crystal reports with parameter references in the formulas?
Thanks,
Tim H.
Edited by: Tim Haley on Nov 25, 2008 11:11 PM
Edited by: Tim Haley on Nov 25, 2008 11:12 PM

Formula variable with replacement path to another input variable

Hi @ all,
i have a question regarding "Formula variable with replacement path to another input variable".
My Problem is that in selection screen and for info-fields the input variable is shown with its key and not with its description.
Scenario:
A formula variable (X) is used to get an input value of a characteristic variable (Y) for 0Fiscper3 to realize a IF-Then scenario.
The formula variable (X) uses replacement path by variable (Y) replace by "key".
In selection screen of the query variable (Y) is named with its key "ZAB_BUPE01" and not with its description " fiscal period". Same as for info-fields where the description is "ZAB_BUPE01" and not " fiscal period".
Does anybody have a solution to display the selection variable correctly?
Regards
Tobias

Issue Solved!
The input varaible (y) for 0Fiscper3 was saved globally on the InfoProvider. This results in that the formula variable with replacement path only shows its technical name. I put the input variable in the query itself and it soved the problem. The variable is displayed with its description in selection screen.
Regards

Text Variable with Replacement Path

Hi,
I want to create a report which will show me 5 years of data. I have used a variable for Fiscal year which will be given by the user. Now I created a 5 key figures with offset to show the 5 years of data.
I used a text variable with replacement path based on Fiscal Year, to display the year in the column heading. But I am only able to get the correct year in the first column. Rest of the column is showing me the same heading. Actually the offset is not working for the text variable.
Can anybody let me know how could we achiev the column heading for the columns with offset.
Thanks

Prashanth,
I have used a replacement variable in the exact situation. Instead of years, I have different months. I have used this variable on 0CALMONTH. I also have two more keyfigures where CALMONTH is offset by -12 and +1.
This variable works perfectly for me as expected.
Did you check the data to make sure that your offset is working? This is was I did for Offsetting and i am sure you have done the same thing.
Right click on the variable, "restrict". A window opens with the values. With the variable selected in the right side, right click "Specify Variable Offsets". If the replacement variable is built on this infoObject, it should work.
Hope it helps. Let me know if you still can not find a solution.

Problem returning variables from dynamic SQL/PLSQL

Hi, I have a problem I am trying to solve using a very short piece of dynamic SQL or PLSQL but I am having problems getting the variable values out of the dynamic block.
I have 16 counters whose names are made up of three variable parts - 'scheme', 'contributory category' and 'employment category'
The 'scheme' can be either 'no1', 'no2', 'off', 'cg' or 'amc'
The 'contributory category' can be either 'cont' or 'noncont'
The 'employment category' can be either 'ft' or 'pt'
(There are only 16 because only 16 combinations are possible)
For example the total counter name could be 'v_cg_noncont_ft_count'
I have created a variable by concatenating the various elements called v_incr_count_name which holds the name of the counter I want to increment.
I am running this whole thing within an anonymous PLSQL block so I cannot use global variables meaning that my variables are not visible within a dynamic PLSQL block.
I believe this means that either I need to bind the variables within a PLSQL block or use a SELECT FROM INTO SQL block.
I have tried a few solutions with no luck such as the following PLSQL:
v_incr_count := 'v_'||v_scheme||'_'||v_cont_cat||'_'||v_emp_cat||'_count';
sql_stmt := 'BEGIN :a := :a + 1; END;';
EXECUTE IMMEDIATE sql_stmt USING v_incr_count_name;
Unfortunately I am getting the 'IN bind variable bound to an OUT position' error which I believe is because it is trying to return a value into v_incr_count_name which has been defined by default as an IN variable. The problem is that I need to store the returned value into the variable whose name is stored in v_incr_count_name.
Another solution I tried is:
v_incr_count_name := 'v_'||v_scheme||'_'||v_cont_cat||'_'||v_emp_cat||'_count';
sql_stmt := 'SELECT '||v_incr_count_name||' + 1 FROM DUAL';
EXECUTE IMMEDIATE sql_stmt INTO v_return;
This solution gives me an 'Invalid colum error'
Any help would be greatly appreciated
Cheers, Dan

Repost:
Problem with variables in dynamic SQL/PLSQL

"non-static variable cannot be referenced from a static contex"

Hi, i'm writing a booking program at school and i'm getting 27 "non-static variable cannot be referenced from a static contex" errors. I can't find anything wrong with the code so I'm just asking you guys to look it through..
public class bokningsmeny
Bokning[] bokningslista = new Bokning[1000];
String fornamn;
String efternamn;
String civilstand;
String adress;
String personnr;
String telefonnr;
int regnr;
double inkomst;
public static void main(String[] args)
for(;;)
System.out.println("\nMeny");
System.out.println("________\n");
System.out.println("1. Mata in nya personer.");
System.out.println("2. Sök personen via personnummer och skriv personens andra uppgifter.");
System.out.println("3. Sök personen via efternamn och skriv personens andra uppgifter.");
System.out.println("4. Sök personen via personnummer och ändra adress.");
System.out.println("5. Sök personen via personnummer och ändra telefonnummer.");
System.out.println("6. Sök personen via personnummer och ändra civilstånd.");
System.out.println("7. Sök personen vis personnummer och ändra inkomst");
System.out.println("8. Skriv ut alla personer med givet namn.");
System.out.println("9. Skriv ut alla personer med givet efternamn");
System.out.println("10. Skriv ut alla personer med given adress");
System.out.println("11. Skriv ut hela listan");
System.out.println("12. Avsluta\n");
int menyval = Keyboard.readInt();
System.out.println("\n");
switch(menyval)
case 1:
System.out.println("Mata in nya personer.\n______________________\n");
boolean BOOuppgifter = false;
for(int i = 0; i <= 1000; i++)
if(bokningslista +== null)+
+{+
+SkrivInUppgifter();+
+System.out.println("\nStämmer informationen? (Y/N)");+
+boolean BOOcase1yesorno = IsInputCorrect();+
+if(BOOcase1yesorno == true)+
+{+
+System.out.println("\nBokningen lyckades!\n");+
+bokningslista += new Bokning(fornamn, efternamn, civilstand, adress, personnr, telefonnr, regnr, inkomst);
++++else if(BOOcase1yesorno == false
++++System.out.println("\nBokningen avbruten.\n")
++++break
++++++break
++++case 2
++++System.out.println("Sok person med personnummer och ändra uppgifter.")
++System.out.println("___________________________________________________________\n")
++System.out.print("Skriv in sokord: ")
++String query = Keyboard.readString()
++query = query.toUpperCase()
++String personnummersok
++boolean contains
++int antal = 0
++boolean BOOcase2result = false
++System.out.println("Resultat: \n_________\n")
++for(int i = 0; i < 1000; i++
++++if(bokningslista +!<b +<em<b +++personnummersok = (bokningslista+.hamtaPersonnum()).t
++++contains = personnummersok.con
++++if(cont
+< ++++BOOcase2r
++++ant
++++fornamn = bokningslist
+++++efternamn = boknin
++++++personnr
+++++++System.out.println(antal + ". " + fornam
++++<e +++++++System.out.pri<br +++++<em +++++++System.out.println("\nVilket sokresultat vill du v&bdquo
++++< +++++++if(case2ch
+++++++System.ou
+++<e< +++<em ++++
++<em +++++++System.out.p
+++++<e +++<<br +++++++System.out.printl
+++<em +++++<em ++
<e ++++++++Sy
+++++
++++++<e <em ++++++++< +++++<e +++
+++< +++++++++else if(case11exit != 'y' &<br +< ++++
++++
+++++
++++<e +++++++
++++<em +++++
+++<em +++++<em ++++< ++++++
++++<e +++++++<e ++<em ++++<e +++< +++++++++System.out.println("\n\nNamn: " + fornamn + "
++++++++++ "\nHemadress: " + adr
++++++++++ telefon
+< +++++++++Syste
++++<em +++++++++if(correct
<em ++<em ++< ++++<e << <e +++++++++I have another file with the Bokning.java class in it but I know for sure that its error free. Notice that I'm not nearly done with the program, theres like 10 more 'cases' to be created but I dont w
++<em

Your code goes "+" crazy there, but here is your problem:
public class B extends A {
 public void method() {}
 public static void main(String[] args) {
 //method(); //non-static method method() cannot be referenced from a static context
 B b = new B();
 b.method();
}You need to be clear about the difference between static methods and non-static (instance) methods. Instance methods are applied to objects.

DiskWarrior cannot replace the original directory due to Mac OS failure?

I have a Powermac Dual G5 running 10.4.8. I have a Lacie Firewire 800 RAID attached.
Lacie firmware is up to date and Disk Utility reports no problems with the RAID, either permissions or Repair/Verify disk.
I have run the latest DiskWarrior 3.0.3 on the RAID (both from the boot volume and booted from the 303 rev39 CD) and it detects a formidable list of potential repairs to be done, creation dates on link files etc.
It offers the next step which is to replace the existing directory with the pristine one it has just prepared.
Every time I press 'Replace' it backs out, reporting;
"The new directory cannot replace the original directory due to a MacOS services failure"
(If I run DW when booted from the RAID, it replaces the normal boot drives directory OK btw)
I do understand there used to be a bug in Mac OS Panther and an older DiskWarrior reporting similar to this but why now with 3.0.3?
What does it mean?
Google was no help. Maybe should have come here first
PowerMac G5 2.5 - PB 12" 1.5 Mac OS X (10.4.8) SE30, IIsi

If lots of errors are reported, it is probably a good idea not to replace the directory. Wiring anything to the drives could make things worse. With Disk Warrior run from your boot hard drive, have it create the new directory, but don't try to write it to the disks. You can then use the new directory to copy files from the bad disks to another disk, or DVDs. It should give you a more accurate backup than the old directory, with its errors. Others have reported LaCie RAID systems failing, so get the data while you can. You could then reformat the LaCie with zeroing and see if it generates errors again, maybe running Disk Warrior daily. If your are lucky, the LaCie may be OK then, but I wouldn't trust it.

Create a formula variable using replacement path for current date

Hi All,
I created a formula variable using replacement path for current date.
But when i used this variable am getting an error message saying .
" This Variable cannot be used in this query".
Could you please let me know the reason?
Thanks,
Zehra

Hi All,
Thanks for all your help...
I just found a solution via the below link
in Bex Formula variabel, Current calander day(sap exit) missing.
Here he is trying to use the existing formula variable.
My doubt here is, Even i could not find this varaible in BEX formula variable, But could see this in BI Content path as mentioned in the above link. DO i have to transport this varaible , or i simply can activate it in production?
I just could find this in BI Content but not in MetaData Repository.
Thanks,
Zehra

Problem inText Variable cannot replace 0calmonth in calculated keyfigure

Similar Messages

Maybe you are looking for