PROBLEM : JWS & JNLP Used to Load Application To User System

Please See The Following Page That has my Problem mentioned in Detail Regarding JWS & JNLP Problem.
http://forum.java.sun.com/thread.jspa?threadID=782060
Just Let me know the SOLUTION PLZ ! ! ! ITS UTMOST URGENT

PLZ HELP THIS IS URGENT !1) Please stop SHOUTING at us, and realise that
something that is URGENT to you is URGENT to
you, but nobody else!
2) If this problem is so urgent to you, it might have
been a better idea to answer zadok's question than
reply with a message shouting your urgency.
For example, if you had said something like..
"Sorry, I made that post on the other forum before
I knew about this forum. This forum seems better
for my question."
You might have got response like ..
"Sure. Please make sure you add a 'conclcusion'
to the other thread, like 'message moved to XYZ forum'."
(you might not get that response, as well, but it is
always worth a try - also note the hints in the reply!)
I have created a Download Manager Apllication using Swings.I do not know where the term 'Swings' originated,
but note that it is the 'Swing' toolkit.
I have deployed it using Java Web Start & JNLP.
Now, I am facing the following problem for which I
am not able to find any solution.
HOW CAN I SAVE THE APPLICATION STATE ON LOCAL SYSTEM ???(again with the shouting..)
The PersistenceAPI should be good for that.
http://java.sun.com/j2se/1.5.0/docs/guide/javaws/jnlp/javax/jnlp/PersistenceService.html
I have a sandboxed project that uses it to store
the GUI state on shut-down and restore it at start-up.
http://www.1point1c.org/spacesim/
Note that while the applications launched by
'spacesim.jnlp' uses the PS, it is
a) not intended as an example of using the
service, and the code is vastly more complicated
than what you require for storing/restoring an URL
and byte count.
b) not available with 'support'.
You might be able to find some better example of
using the PersistenceService by searching either
here or Sun's site on (something like)
"PersistenceService example"
If those search terms don't work for you, drop
back into the forum and someone might be able to
suggest better ones, or a direct link.
But please stop shouting at us.

Similar Messages

Word 2007 - Save as Pdf gives error - This file is in use by another application or user

I have MS Office 2007 Small Business.
For months I have been using the "Save as PDF/XPS" option to save my word documents as PDF files.
All of a sudden, when I click on the publish button within the "save as PDF dialog", I get the error:
"This file is in use by another application or user."
- I have tried creating a new word document and I still get this error when I try to save-as pdf.
- I have tried opening a document that previously was able to be saved-as-a-pdf, and it no longer works either.
- I have tried saving from other office applications (excel, powerpoint) that also get errors now.
I have not personally installed any new software that I recall between when this worked and stopped working for me.
As far as I can tell there have been no updates explicitly for save-as-pdf in office.
Is anyone else seeing this problem all-of-a-sudden?
Thanks.
jlk

I just encountered this problem while trying to save a pdf from Excel 2007. I had recently updated to Adobe Reader 9.1.
I received the same error message you're reporting here when I went to Word 2007 and tried to save a pdf file from it as well.
I uninstalled Adobe Reader 9.1.
Reinstalled the Office 2007 pdf plug-in
Successfully created pdf files from word and from Excel (which is what I needed to do in the first place).
I then reinstalled Adobe Reader 9.1 so I could read the PDF files I had just created in Excel and word.
I then tried to create pdf files from word and excel. Error messages are back and I'm unable to create pdf's from word or excel.
So.. why does Office 2007 pdf plugin not work when Adobe Reader 9.1 is installed?
Frankly I'm getting tired of uninstalling Adobe Reader 9.1 every time I need to create a pdf file in Word or Excel.
Bry

Built-in iSight problems-"camera in use by another application" but its NOT

I am having an issue with my iMac G5 2.1GHz with iSight built in.
I tried to iChat AV tonight after months of not using it. When I opened my own video window it says "Your camera is in use by another application."
There are no other applications open in the dock other than Finder.
Same results with Photobooth. The message reads -- Photo Booth cannot open because the camera is in use by another applicaton. Close the application using the camera, then try opening Photo Booth again. < OK >
I searched this forum and tried the following:
• zap PRAM
• reset SMU
• reset NVRAM
I looked for iSight prefs, but couldn't find anything. Deleting prefs is the only thing I have not tried, but I do not know what to delete.
Also, the camera shows up under USB under system profiler. The IR remote also shows up on the same bus, and the remote works just fine.
The green light next to the iSight is never on.
I switched to another user and experience the same problems, so it does not seem to be user settings.
Any help to get my computer to recognize my iSight would be appreciated!

Thanks for the note. I saw that Apple KB article #93216 that basically tells you not to have any other applications running that use the camera, which I do not. Also, I have Classic installed, but it is not running as I hardly ever use it.
Since my original post last night I have tried several more things, with absolutely zero success.
One unique thing that I thought would work (and it sort of did) was to add Photobooth to my Startup Items under the Accounts tab of System Preferences. Unlike iChat AV, Photobooth will not even open if the built-in iSight is not available. So, I thought, let's see if Photobooth will open at Startup and perhaps take over the camera before whatever is taking it over has a chance to do that.
Sure enough, this trick worked, although the video screen was blank. On a second time the video screen showed erratic thick lines like it was starting to pass the video data through and then was stopped. Again, my iSight is recognized by Apple System Profiler, so the computer knows it is there and is getting power, etc. As soon as I quit Photobooth and tried to reopen it, I received the message again that the camera was in use by another application.
My next steps, when I am able, are to try to boot off an external firewire hard drive that should have an older saved backup of my system, from when the camera was working. I will also download the combo updater as you suggest, MGW, and apply that as I understand that to be a sort of remedy for any number of problems.
To me it appears to be a software issue. I would imagine with the OS and not related to any application in particular. (iPhoto cannot access the iSight, can it? For some reason my iPhoto opens automatically on my G5 iMac every time I boot it up, and I cannot figure out why. I will look into this issue and see if it is related.)

URL iView Problem - How to Use URL Parameter of Type 'User Information'

Hello URL iView experts
I am currently working on integration of backend-functionality with the help of an URL iView.
I want to use a parameter of type 'User Information'. In SAP Help Library it is said, that it is possible to set the value of a parameter according to a dynamic query on the users attributes. (Link SAP HELP)
It is also said, that one can retrieve the Logon ID of the users account.(Attribute Name: j_user -> Link SAP HELP Attributes )
I can choose the type 'User Information' but i don't know what to specify in the field 'Value'.
I have made a screenshot of the problem.->[Link to screenshot|http://img66.imageshack.us/img66/7782/urliviewproblemfrsdnthrel3.jpg]
But if i am calling the application this way, he doesn't retrieve the Logon-ID of the account, but he just uses the 'j_user' as value for the parameter.
Can you tell me, what i need to specify in the field value?
Best Regards
Marcus
Edited by: Marcus Böhm on Jun 2, 2008 1:22 PM

Hi Marcus,
> It is also said, that one can retrieve the Logon ID of the users account
This is not correct; on the help.sap.com-page concerning the URL-iView-Parameters, it is printed that "other attributes (general, account, group, role) are not supported". The j_user attribute is part of the account group, so - not supported.
For your needs, it may be a better choose to use the AppIntegrator, which offers such a possibility by using "<User.LogonUid>"; see http://help.sap.com/saphelp_nw70/helpdata/EN/36/5e3842134bad04e10000000a1550b0/frameset.htm and https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0cbc309-ff89-2a10-8bad-bcde4c152ecb
Hope it helps
Detlev

Problem modifying FPGA code in an Application Builder-based system

I've inherited a working test system which uses LabVIEW FPGA, LabVIEW, Application Builder, and third party tools. The FPGA module (a FlexRIO) is responsible for generating test signals to a DUT and acquiring DUT output data. The host LabVIEW code controls the FlexRIO and acquires the test data. Application Builder is used to convert the host LabVIEW code to a Windows DLL so that it can be in turn controlled by higher level data analysis software running on Windows.
All of this currently works, and we're using it on a daily basis to test production devices.
We need to modify the FPGA operation to change the way the tests operate. We've modified the the FPGA VI to operate as we need it to and rebuilt the FPGA code (resulting in a new bit file), but subsequent runs of the test stack do not show the change to the operation of the FPGA code (the signals it is generating look exactly the same as in the original, unmodified, VI). We've tried renaming, deleting, and moving the bit file, but operation of the system is always exactly the same, even when the bit file is named differently or not located in the expected directory. We can't seem to affect the behavior we get out of the FPGA. It seems like we're not rebuilding something correctly, or that the system somehow has a copy of the old bit file stored away some place that it's using instead of the desired bit file.
We've verified that the newly created bit file is different than the original bit file, so it appears that the FPGA build process is succeeeding. I see no errors from LabVIEW when I build the FPGA code.
Does a DLL-ized version of LabVIEW host code operate the same as the same VI run from within the LabVIEW environment? When the DLL loads the FlexRIO, does it do so from the same referenced file path (I have the "Open FPGA VI Reference" properties set to use the bitfile, and the "Run the FPGA VI" checkbox is checked). We've power-cycled the host PXIe chassis between software runs to make sure the configuration memory in the FlexRIO is cleared.
It seems highly suspicious that we see the FPGA come up and run even when the bit file has been renamed or moved from the directory indicated in the "Open FPGA VI Reference". I would think that the DLL would attempt to open that file, fail to find it, and trip some sort of error dialog. But this doesn't occur, the FPGA gets loaded normally, and the test system operates as if nothing had been touched.
Previous developers were able to make this build process work, but it seems we're missing some critical step needed to actually update the code that ends up running on the FPGA.
The system is LabVIEW 2012.

The FPGA build definition has the bitfile filename hardwired into it, so the name is constant across rebuilds of the FPGA code. So we always have the same bitfile name (and consequently if we're not careful about saving the old files, then the old bitfile will be overwritten by a new build).
I could try your suggestion about the alternate calling method, but I'm hesitant about changing a build process that was known to work. It seems to me that I'm somehow not building the software correctly, as if I don't understand something about the DLL build process that's keeping the new FPGA code from being used.
To reiterate, our build process is:
1) Modify the LabVIEW FPGA VI
2) "Run" the FPGA VI to compile it (by the way, last night we tried a "Rebuild" on the FPGA code from the right click menu off the VI in the LabVIEW project and that also has failed to change the results)
3) Build the host DLL code by right clicking the DLL build definition in the LabVIEW project and selecting Build
4) Copy the resulting host DLL over to the directory location where the higher level Windows software expects to find it
5) Run the higher level Windows software (at which point we view waveforms generated by the FlexRIO to see if the FPGA's behavior has changed).
We've verified that the LabVIEW DLL won't rebuild if we rename the bitfile (LabVIEW gives an error saying it can't find the bitfile). We've also verified that the higher level Windows software won't run if the LabVIEW DLL is renamed in its directory (so we know that that exact copy is being opened by the Windows software). Yet we can't seem to modify the FlexRIO's behavior through this process.

What ATP category to use when loading from non SAP system

Hi Experts,
We are sourcing transactional data from SAP R/3 and using CIF to transfer these data to APO.
Now we have new sets of material locations where we are going to source transcational data from non-SAP system. We are going to extract file from non-SAP system and load it to APO. My question is, do I need to create new categories (non SAP categories) for all these transactional data (sales order, production order, purchase order, etc...) Or can I just use existing SAP categories that are getting populated when data are coming from R/3 through CIF.
If its possible, can I use RLCDELETE to delete previously posted transactional data? because we are planning to do full refresh and reload everyday.
Appreciate your help. Thanks
Regards,
Mylene

Hi My lene,
If i undersood your question correctly, you are trying to upload transaction data into APO system using file interface.
You can use custom or standard ATP categories to upload any type of transaction data and deletion of those orders also possible for both the ATP categories using RLCDLETE report (except salesorder and fixed planned orders, they can be deleted by SDORDER_DEL & DELETE_PP_OREDER reports respectively).
Custome categoires will be used in case additional data needs to get stored in APO system along with the standard transaction data coming from ECC system . For example, salesorders coming from ECC and uploaded from file.
If the transaction data coming from only one source system then it is better to use standard categories.
Hope this answers your question.
Thanks & Regards,
Jagadeesh

Error, can't use scanner with in use by other application or user!!!!!!!!!

Ive seen this over time but the only response was to re start, as well some instructions for PC Scanner isc Canoscan lide 210OS is mac osx , mavericks and ysemite and el capitian (beta), same issues on all O/S 's Any please help

Are you scanning from MP Navigator or ImageCapture?
on the 10.9 or 10.10 computers I'd download the ICA driver and the Scanner driver, along with the latest version of MP Navigator from the website and install them, then reboot.
http://usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_lide210#DriversAndSoftware
Try to scan using MP Navigator. If you get the error, close MP Navigator and try to scan using ImageCapture. Do you still get the error?
I'm not including suggestions for El Capitan because there aren't drivers available for it yet, so I wouldnt expect it to work.

Problems loading applications using Blackberry Desktop software

I am using a Blackberry Bold 9000 with OS 5.0.0.681 (Bundle 1137, Platform 5.2.064) and Desktop Software 6.0.0.40 (Bundle 42) on Windows XP. I have about 20 MB of memory available for apps, but I cannot load new applications using Blackberry Desktop software. Now I can remove or unload software with no problem. However, when I attempt to load applications or software that I don't have, the following happens: I can click on the grey cross icon under "Action" to indicate I want the module and status changes to "Pending Install". The apps I want are English UK, Spanish, Supplemental SureType Wordlists for English and Spanish, Blackberry Application Centre, DOD Root Certificates, TTY Support. I then see the following on on the screen: "Update - Uploading Device software -->" "Update - Loading applications -->" "Loading device modules -->" "Loading applications from device - Searching for available device software -->" "Loading applications from device - Read device service information -->" "Loading applications from device - Searching for available device software -->" And lo and behold - the applications are not loaded; they appear as uninstalled in the application list and I can't access them on my Blackberry. During this process the phone does not reboot... previously when changes were made the phone would reboot. My question is, is there a way to force Desktop Manager to load the applications? How can I load the software I want? I have done a wipe and reinstall of apps and OS on my phone; delete and registry clean of my laptop followed by reinstallation of Desktop Software; battery pull and SIM card pull, but to no avail. This is frustrating as I have friends with whom I converse with in Spanish but it isn't my first language so the spell checker is very useful. Any help would be appreciated.

Same problem, after weeks of no problems.
Hard reboot of 8520 several times, reboot desktop, tried different USB ports.
Intellisync crashes on organizer sync and Destop Manager cannot read applications.
Is there a fix?

Error while loading an XML document using a structured application

Hi,
I try to load an XML document using a structured application defined in the default structapps.fm
My code is shown down, extracted from the FDK API code sample.
Problem, I always have the same message :
"Cannot find the file named e:\xml\AdobeFrameMaker10\file. Make sure that the file exists. "
Where "e:\xml\AdobeFrameMaker10\" is my install directory.
So I assume that frame try to find the structapps.fm file but does not find it.
What else can it be ?
Does anyone knowns how to achieve this simple task using extendScript ?
Thanks for any comments, Pierre
function openXMLFile(myLastFile) {
    var filename = myLastFile.openDlg("Choose XML file ...", "*.xml", false);
    if (filename != null) {
        /* Get default open properties. Return if it can’t be allocated. */
        var params = GetOpenDefaultParams();
        /* Set properties to open an XML document*/
        /*Specify XML as file type to open*/
        var i = GetPropIndex(params, Constants.FS_OpenAsType)
        params[i].propVal.ival = Constants.FV_TYPE_XML;
        /* Specify the XML application to be used when opening the document.*/
        i = GetPropIndex(params, Constants.FS_StructuredOpenApplication)
        params[i].propVal.sval = "myApp";
        i = GetPropIndex(params, Constants.FS_FileIsOldVersion)
        params[i].propVal.ival = Constants.FV_DoOK
        i = GetPropIndex(params, Constants.FS_FontNotFoundInDoc)
        params[i].propVal.ival = Constants.FV_DoOK
        i = GetPropIndex(params, Constants.FS_FileIsInUse)
        params[i].propVal.ival = Constants.FV_DoCancel
        i = GetPropIndex(params, Constants.FS_AlertUserAboutFailure)
        params[i].propVal.ival = Constants.FV_DoCancel
        /*The structapps.fm file containing the specified application must have
        already been read. The default structapps.fm file is read when FrameMaker is
        opened so this shouldn't be a problem if the application to be used is
        listed in the structapps.fm file.*/
        var retParm = new PropVals()
        var fileObj = Open(filename, params, retParm);
        return fileObj
    } else {
        return null;

Pierre,
Depending on the object "myLastFile", the method openDlg might not even exist (if the myLastFile object is not a File object, for instance). And I do not see any need for the myLastFile anyhow, as you are presenting a dialog to select a file to open. I recommend using the global ChooseFile( ) method instead. This will give you a filename as string in full path notation, or null when no file was selected in the dialog. I am not sure what your ExtendScript documentation states about the return value for ChooseFile, but if that differs from what I am telling you here, the documentation is wrong. So, if you replace the first lines of your code with the following it should work:
function openXMLFile ( ) {
    var filename = ChooseFile ( "Choose XML file ...", "", "*.xml", Constants.FV_ChooseSelect );
While writing this, I see that Russ has already given you the same advice. Use the symbolic constant value I indicated to use the ChooseFile dialog to select a single file (it can also be used to select a directory or open a file - but you want to control the opening process yourself). Note that this method allows you to set a start directory for the dialog (second parameter). The ESTK autocompletion also gives you a fifth parameter "helplink" which is undocumented and can safely be ignored.
Good luck
Jang

Problem Loading Application to Card

I just purchased a Samsung S3CC9P9 smart card and I have problem loading applications onto the card.
Here is the problem:
On first usage, after successful mutual authentication, the card allows me to load the first application I try loading but after this it refuses to load any other application and responding with the error message 0x6424. I purchased 5 cards and 2 of them are already in this state.
Is there something I am missing-out? Is there somthing I ought to have done?
If I try the same process with my JCOP 31 card I purchased earlier everything works fine.
I am using JCOP tools and here is the APDU trace:
cm> /term PCSC
--Opening terminal
/card -a a000000003000000 -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B 69 00 00 80 63 31 46 01 83 FF 90 00 ;i...c1F.....
ATR: T=0, N=0, Hist=806331460183FF9000
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(343548 usec)
<= 6F 19 84 08 A0 00 00 00 03 00 00 00 A5 0D 9F 6E o..............n
06 10 01 76 DE 00 05 9F 65 01 7F 90 00 ...v....e....
Status: No Error
cm> init-update
=> 80 50 00 00 08 32 1A 50 E0 99 6C FE 99 00 .P...2.P..l...
(389412 usec)
<= 00 00 71 18 02 05 30 35 33 F6 FF 01 C4 4A 1F E7 ..q...053....J..
CB 83 6F DE 6D 09 AD CB 62 6D E2 80 90 00 ..o.m...bm....
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 13 D4 7A E1 62 FC F0 DA 9A 02 24 .......z.b.....$
CF B9 AA 54 F2 ...T.
(260159 usec)
<= 90 00 ..
Status: No Error
cm> upload -b 250 "E:\projects\EclipseWorkSpace\Library 2\bin\authentication\javacard\authentication.cap"
=> 80 E6 02 00 1B 0E 61 75 74 68 65 6E 74 69 63 61 ......authentica
74 69 6F 6E 08 A0 00 00 00 03 00 00 00 00 00 00 tion............
00 .
(887460 usec)
<= 90 00 ..
Status: No Error
=> 80 E8 80 00 78 C4 76 01 00 18 DE CA FF ED 01 02 ....x.v.........
02 00 01 0E 61 75 74 68 65 6E 74 69 63 61 74 69 ....authenticati
6F 6E 02 00 1F 00 18 00 1F 00 00 00 0B 00 02 00 on..............
03 00 01 00 0A 00 04 00 05 00 40 00 00 00 00 00 ..........@.....
00 01 00 00 04 00 0B 01 00 01 07 A0 00 00 00 62 ...............b
01 01 06 00 03 C1 80 02 07 00 01 00 08 00 0A 00 ................
00 00 00 00 00 00 00 00 00 0A 00 05 01 00 00 00 ................
00 05 00 02 00 00 09 00 04 00 00 00 00 00 ..............
(410207 usec)
<= 64 24 d$
Status: 0x6424
jcshell: Error code: 6424 (0x6424)
jcshell: Wrong response APDU: 6424
PLEASE HELP... Thanks in advance.

Hi
I am stuck with my Java card application.I have careted the cap file using java card frame work .But while installing on to the real card ,i m getting reponse install_for_load return 6d00 .If a am trying to delete tha applet also it is giving me the same error.If i pass any APDU commands its is giving me the same eroor..really got stucked.I have tried using GPSHell.Even i tried loading the script they have ,Still the same probled .I have read in this post ,u have done using JSHell.Can u please guide me on that ,to install my applet on the real card.Please ..really urgent.

JWS - JNLP - icon using .ico-files?

After reading the enhancements here http://download.oracle.com/javase/6/docs/technotes/guides/javaws/enhancements6.html
I tried to use .ICO-files in the JNLP-<icon>-Tag without success. Also .PNG-files don't work.
The search with google also found only questions but no answers.
Additionally I only found samples using .GIF-files!
We want to use "rounded" pictures for desktop links, thus we need a format with transparent colors support.
Additionally we want to have the ability to use different sizes depending on desktop settings.
The .ICO-file format - out of the box - supports both of that!
Does anyone has a RUNNING sample-JNLP using an .ICO-file or .PNG-file? Or can point me to a solution to that problem?
Running: Java 1.6.0.22, Windows XP & Windows 7
Thanks in advance

Hello,
have you took the application/x-java-archive-diff MIME type into your tomcat-web.xml?
I have found this in the jnlp-specifications:
>
6.3 Version-based Download Protocol
For the version-based download protocol, all resources are uniquely identified by a URL/version-id pair. Thus, a JNLP Client can at any given time request a specific version of a resource located at a specific URL.
The JNLP Client issues an HTTP GET request that includes the specific version of the resource that it needs. The request includes the field version-id, which specifies the requested version. For example, given the following jar element:
<jar href="http://www.mysite.com/b.jar" version="2.3+"/>
then the JNLP Client must issue the following HTTP GET request14:
http://www.mysite.com/c.jar?version-id=2.3%2B
The JNLP Client must examine the HTTP response status code and MIME type to determine if the result was successful. The valid responses are described in section 6.1.2. For the above jar element, the application/x-java-archive-diff MIME type cannot be returned. It can only be returned for incremental requests.
The version string used in the request is not necessarily exact, e.g., 2.3+. The Web server must specify the exact version-id of the resource that is returned in the response by setting the HTTP header field: x-java-jnlp-version-id. The exact version returned must be one that matches the requested version string.
6.3.1 Incremental Updates for JAR files
JNLP allows incremental updates to be applied to JAR files. Typically, downloading an incremental update will be much faster than downloading the new version. Incremental updates are distributed in the form of JARDiff files, which are described in Appendix B.
If the JNLP Client has a previous version of a given JAR file already cached, e.g., version 2.2, then this fact can be specified in the request. The Web server can then potentially provide an incremental update that can be applied to the existing file, instead of returning the contents of the new file.
An incremental update is enabled by providing information about the version that is already cached by the JNLP Client in the HTTP request. The field current-version-id is used to specify the existing local version. For example:
http://www.mysite.com/c.jar?version-id=2.3%2B&current-version-id=2.2
The current-version-id must always be exact. If several versions of a given resource are in the cache, then the highest version-id that is lower than the requested version should be used. The Web server is not required to return an incremental update, but could just return the requested JAR file.
The returned contents of the response are the same as for the request without the current-version-id field, except that a JARDiff file might be returned. In that case, the response MIME type must be application/x-java-archive-diff.
>
MfG
hansmueller

How do I restore my iPhoto. When I open i get a window dialog "Your iphoto library is either in use by another application or has become unreadable shut down and restart your computer. If problem persists, try rebuilding your iphoto library. To do th

When I try to open iPhoto I get a window dialog that says...
Your photo library is either in use by another application or has become unreadable
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
I have tried the reopen it while keeping the Option and Command keyes pressed.
No change.
I dee nothing but a blank page,
Any help would be appreciated.
Also hace back ups of all images on cd's. dvds and jump drives.
Any advice is appreciated.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Problem in configuring SSO using SAML for applications hosted on diff m/c

Hi Techies,
I am stuck in a weird problem for past month or so without any resolution. Not much help by googling. So I hope i get the answer from the mouth of the horses -
I am trying to use SSO using the sample application appA and appB as stated in the tutorial of SSO by BEA.
I am summarizing the problem below -
Steps followed for Configuring SSO using SAML
1. Created 2 domains on 2 seperate machines namely domainA and domainB
2. Source appliction is deployed on domainA and the target application is deployed on domaninB
The steps mentioned in the following tutorial has been followed-
http://dev2dev.bea.com/pub/a/2006/12/sso-with-saml.html
3. As mentioned in the tutorial the certificate is generated using keytool utility. The same certificate is copied
to WEBLOGIC_HOME/server/lib of destination machine.
4. The certificate was successfully registered on desitnation or host 2 but while activating the configuration
changes(SSL client Ientity Alias and SSL Client Identity Pass Phrase) for Federation services the following error
is thrown -
" SAMLBeanUpdateListener: SAMLKeyManager.prepareUpdate() failed with exception:
weblogic.descriptor.BeanUpdateRejectedException: SAML key Manage failed to validate key (SSL Client) configuration
in the FederationServicesMBean, key alias: testalias "
The interesting bit of the problem is that the same configuration works on 2 domains created on same machine. The
problem only occurs when domains are created on seperate machines.
Alterative to the problem: when the certificate is generated seperately for domainB and copied to
WEBLOGIC_HOME/server/lib, it works. However, the certificate generated in domainA should have been copied.
Note: I am using Weblogic portal 9.2.1
Any quick replies will be much appreciated. Thanks.
Edited by saurabh.agrawal at 02/06/2008 2:01 PM

Hi François,
You are right about the use of the NameID format. But the issue here is/was that OIF at SP is integrated with OAM, and the authenticated user at OIF-SP and OAM will be the Anonymous user rather than the user who was identified at the IdP even though the remaining attributes sent are for the IdP user. I think these attributes can be used by with OAM for authorization using custom authorization plug-ins but haven't tried that one out.
As for the attribute sharing profile, it's this one - http://www.oasis-open.org/committees/download.php/18058/sstc-saml-x509-authn-attrib-profile-cd-02.pdf, although for the life of me, I cannot remember why I suggested this in the first place!
-Vinod

Photo Booth Problems -- being used by another applications/ Please help!

Hi everyone: I am having problems with my 17" iMac (C2D). Photo Booth worked great for the first few weeks. Now when I go to use it -- I get a message that says it is in use by another application or there is no camera attached. Well of course there is a camera attached and there is no other application running. I've tried shutting down and bring the computer back up, as suggested in other posts. That did not work.
Any other suggestions please. I'd really like to get this going again.
Sincerely,
Anne

Hello apple-chick
Check to make sure that iSight was not left on in another app, it can only be used by one app at a time!
1. See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications.
2. See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
3. Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
4. Reset SMC
Reset your computer's SMC and then check System Profiler again.
http://docs.info.apple.com/article.html?artnum=303446
Dennis
17" iMac Intel Core Duo 1.5GB Ram Mac OS X (10.4.9) Maxtor 300GB FireWire Creative Inspire 2.1 2G Nano

How to access the function in loaded application using swfloader?

Hi,
I have a main flex application which has a view stack, panel
and swfloader in the below hierarchy.
Flex main app --> Canvas1(Viewstack) --> Panel1 -->
Swfloader
Please view
http://www.probe7.com/flex_ques.gif
for better understanding.
I have a function in the loaded application which has to be
called from a function within the main application. I am not sure
of the syntax to access the swfloader content which is placed in a
canvas -> panel.
I tried this example (
http://livedocs.adobe.com/flex/3/html/help.html?content=controls_15.html),
it works when the swfloader is placed in the main application
without the viewstack or panel. How can I do this, Is there a way
to access all the running applictaions, regardless of the
hierarchy? Any help will be greatly appreciated.
Also any links for quick reference on various components and
their access will be helpful.
Thanks for your time.

You are probably seeing the deferred instantiation behavior
which is the default for ViewStack.
The Swfloader component does not exist until a user navigates
to the View that contains it.
Use events to determine when the swfloader content is ready
for interaction. Here is an example:
http://www.cflex.net/showFileDetails.cfm?ObjectID=690
Tracy

PROBLEM : JWS & JNLP Used to Load Application To User System

Similar Messages

Maybe you are looking for