Problem-Loading Byte code from DB

Dear all,
have any one tried to load the bytecode read from the database. If so, please suggest me a way to do it. Iam developing a frame-work where nothing except a servlet would reside on the disk as a file. after designing the frame work, i've encountered this problem...plz suggest me a way.

Yes! You are correct. My Intention is Exactly the Same. If The byte code is residing in a database, with the classname as key, i would load all the class tree from the DB and execute the program....Please Help me
Thanks
Sasi

Similar Messages

Problems loading RAW files from Canon 6D in Elements 10

Elements 10 - Windows: I have been using the software for a couple of years and never had a problem loading RAW files from my Canon T2i ir 60D, however I just purchased a Canon 6D and when I try to load a RAW from the 6D I get Cannot open 'C:\User...CR2' because it is the wrong type of file. I thought cameraraw 6.5 patch would be the fix but when trying to install I get "Error loading Updater workflow"

Will the DNG files perform the same, meaning will I retain all the information that makes RAW important for processing?
Yes. That's why DNGs were invented. Adobe has put a lot of work into the DNG format for this very reason.
Raw files are proprietary and manufacturer specific. Raw formats change with every make and model of camera. Software must be updated for the new Raw format of every single camera. Adobe does an admirable job of upgrading Camera Raw for every new camera.
DNG is also a Raw format but it's open source and works in any software which can read the DNG format. If camera manufacturers used the DNG format instead of their own Raw format, you would not have to upgrade Elements 10. But they don't, and probably never will, so you must upgrade the Camera Raw plugin (and therefore Elements 10 since it's not compatible with the new Camera Raw) to read the new Raw format from the 6D or add another step to your workflow with conversion to DNG first.
See
http://photographylife.com/dng-vs-raw
http://www.adobe.com/products/photoshop/extend.displayTab2.html

Problems loading raw files from Nikon D750 to lightroom4

problems loading raw files from Nikon D750 to lightroom4. Any thoughts?

This is a recently produced model so raw support was only added in LR 5.7 / ACR 8.7, updates to LR 4 ceased about two years ago when LR 5 was issued.
Options a.) Upgrade to LR 5.
b.) Utilize the latest Adobe DNG Converter 8.8 to convert the nef files to dng format then you will be able to import the dng files into LR 4.

How can i execute byte code from remote location.

I want my program to execute byte code from some remote location.Should i ransfer class files to my pc and then execute it but i would it to be executed from remote location.

... but i would it to be executed from remote location.Sounds like you want to use RMI (Remote Method Invocation).
Allows you to have a remote machine execute code.
Start here:
http://developer.java.sun.com/developer/onlineTraining/rmi/index.html

Problem loading modified classes from CLASSPATH using system class loader

Hi,
I am facing problem to load the modified classes from CLASSPATH.
I have set my CLASSPATH to a directory whose classes will be modified frequently. After the server(web/app) is started, the system class loader, using which am trying to load the classes from the directory where the CLASSPATH is set, am not able to load the modified files without the server restart.
Do I need to have a custom class loader to fix this.
Please help me.
Thanks,
Sureddy

Do I need to have a custom class loader to fix this.Yes.

Loading JavaFX code from string

Hi,
Here is my JavaFX code that I put to the SimplePainter.fx file:
import javafx.stage.*;
import javafx.scene.*;
import javafx.scene.paint.*;
import javafx.scene.input.*;
import javafx.scene.shape.*;
var elements: PathElement[];
Stage {
    title: "Simple Painter"
    scene: Scene {
        content: Group{
            content: [
                Rectangle{
                    width: 400
                    height: 300
                    fill: Color.WHITE
                    onMousePressed: function( e: MouseEvent ):Void {
                            insert MoveTo {x : e.x, y : e.y } into elements;
                    onMouseDragged: function( e: MouseEvent ):Void {
                            insert LineTo {x : e.x, y : e.y } into elements;
                Path{
                    stroke: Color.BLUE
                    elements: bind elements
}I am trying to use the ScriptEngineManager to evaluate the SimplePainter file:
import java.io.FileReader;
import javax.script.ScriptEngineManager;
var path = "C:/Temp/fx/SimplePainter.fx";
var manager = new ScriptEngineManager();
var engine = manager.getEngineByExtension("fx");
engine.eval(new FileReader(path));It throws AssertionError:
java.lang.AssertionError
at com.sun.tools.javac.jvm.Gen.visitBreak(Gen.java:1631)
at com.sun.tools.javac.tree.JCTree$JCBreak.accept(JCTree.java:1167)
at com.sun.tools.javac.jvm.Gen.genDef(Gen.java:679)
at com.sun.tools.javac.jvm.Gen.genStat(Gen.java:714)
However the simple 'println("Hello World!")' code is invoked fine.
Do I do something wrong?
Is it possible to use JavaFX compile methods to execute a JavaFX code from string?
Thanks in advance.

I experimented with that a while ago with JavaFX 1.1, with success: [Creating JavaFX Classes from Java Classes then running?|http://forums.sun.com/thread.jspa?threadID=5368159]
I tried again:
import java.io.*;
import com.sun.javafx.api.JavaFXScriptEngine;
import javax.script.ScriptEngine;
import javax.script.ScriptEngineManager;
class RunJavaFXScript
static String SCRIPT_NAME = "Test.fx";
public static void main(String[] args)
    // Get the current directory
    File curDir = new File(".");
    // Get the script's file content
    BufferedReader reader = null;
    File fScript = new File(curDir.getAbsolutePath(), SCRIPT_NAME);
    System.out.println("Reading the " + fScript.getAbsolutePath() + " script");
    try
      reader = new BufferedReader(new FileReader(fScript));
    catch (FileNotFoundException e)
      System.err.println("File not found: " + fScript.getAbsolutePath());
      return;
    // Create a script on the fly
    String script = "function Demo() { println('Hello World!'); return 'It works!'; }";
    System.out.println("Getting the engines");
    ScriptEngineManager manager = new ScriptEngineManager();
    ScriptEngine engine = manager.getEngineByExtension("fx");
    System.out.println("Getting the generic ScriptEngine (by extension): " + engine);
    JavaFXScriptEngine fxEngine = (JavaFXScriptEngine) manager.getEngineByName("javafx");
    System.out.println("Getting the JavaFXScriptEngine: " + fxEngine);
    // Try to run it
    try
      System.out.println("Running the script read from a file: " + reader);
      Object readScript = engine.eval(reader);
      System.out.println("Running a built-in script");
      Object internalScript = fxEngine.eval(script);
      Object r = fxEngine.invokeFunction("Demo");
      System.out.println("Returned: " + (String) r);
    catch (Exception e)
      e.printStackTrace();
    finally
      try { reader.close(); } catch (IOException e) {}
}Compiled with:
javac -cp %JAVAFX_HOME%/lib/shared/javafxc.jar RunJavaFXScript.java(with JAVAFX_HOME pointing at javafx-sdk1.1)
Ran with:
java -cp %JAVAFX_HOME%/lib/shared/javafxc.jar;%JAVAFX_HOME%/lib/desktop/javafxgui.jar;%JAVAFX_HOME%/lib/desktop/Scenario.jar;. RunJavaFXScriptIt works:
Reading the E:\Dev\PhiLhoSoft\Java\_QuickExperiments\.\Test.fx script
Getting the engines
Getting the generic ScriptEngine (by extension): com.sun.tools.javafx.script.JavaFXScriptEngineImpl@758fc9
Getting the JavaFXScriptEngine: com.sun.tools.javafx.script.JavaFXScriptEngineImpl@1113708
Running the script read from a file: java.io.BufferedReader@133f1d7
Running a built-in script
Hello World!
Returned: It works!(and it shows a Stage with a small FX script showing an animation).
Now, I try to do the same of JavaFX 1.2: same command line for compiling (except of course pointing to javafx-sdk1.2), run command is:
java -cp . -Djava.ext.dirs=%JAVAFX_HOME%/lib/shared;%JAVAFX_HOME%/lib/desktop RunJavaFXScript(more jars to take in account, I take everything...)
And when I run it I have:
Reading the E:\Dev\PhiLhoSoft\Java\_QuickExperiments\.\Test.fx script
Getting the engines
Getting the generic ScriptEngine (by extension): com.sun.tools.javafx.script.JavaFXScriptEngineImpl@8813f2
Getting the JavaFXScriptEngine: com.sun.tools.javafx.script.JavaFXScriptEngineImpl@1d58aae
Running the script read from a file: java.io.BufferedReader@83cc67
An exception has occurred in the OpenJavafx compiler. Please file a bug at the Openjfx-compiler issues home (https://openjfx-compiler.dev.java.net/Issues) after checking for duplicates. Include the following diagnostic in your report and, if possible, the source code which triggered this problem. Thank you.
java.lang.AssertionError
        at com.sun.tools.javac.jvm.Gen.visitBreak(Gen.java:1631)
        at com.sun.tools.javac.tree.JCTree$JCBreak.accept(JCTree.java:1167)
        at com.sun.tools.javac.jvm.Gen.genDef(Gen.java:679)
        at com.sun.tools.javac.jvm.Gen.genStat(Gen.java:714)
        at com.sun.tools.javac.jvm.Gen.genStat(Gen.java:700)
        at com.sun.tools.javac.jvm.Gen.genStats(Gen.java:751)
        at com.sun.tools.javac.jvm.Gen.genStats(Gen.java:735)
        at com.sun.tools.javac.jvm.Gen.visitSwitch(Gen.java:1210)
        at com.sun.tools.javac.tree.JCTree$JCSwitch.accept(JCTree.java:943)
        at com.sun.tools.javac.jvm.Gen.genDef(Gen.java:679)
        at com.sun.tools.javac.jvm.Gen.genStat(Gen.java:714)
        at com.sun.tools.javac.jvm.Gen.genStat(Gen.java:700)
        at com.sun.tools.javac.jvm.Gen.genLoop(Gen.java:1076)
        at com.sun.tools.javac.jvm.Gen.visitForLoop(Gen.java:1047)
        at com.sun.tools.javac.tree.JCTree$JCForLoop.accept(JCTree.java:856)
(and so on)So I have the same issue.
Looks like something have been broken in 1.2... :-(
Of course, the tested scripts compile without problem.
If I put only my simple built-in script in the Test.fx file, it works... I can put an empty Stage in the script (it is displayed), but if I add an empty Scene to it, I have the same error.

Problem while migrating code from JDev 9.04 to JDev10.1.3

I have migrated code from JDev 9.04 to JDev10.1.3, in that i am using a customised Combo Box which is using JUPanelBinding in setModel.But that Combo Box is not displayed properly as of 9.0.4. Also when i tried to print JUPanelBinding value it is giving as - noPanel_oracle_jbo_uicli_jui_JUPanelBinding_1.
Where is the problem ? (in panel binding or in setModel )
Can anyone suggest me a solution for that ?

It's a regression. I filed bug 5703242.
As a workaround you could specify sequence name with the qulifier:
aSequence.setTableName("TEST.SEQUENCE");Alternatively you could override TableSequence class:
public class MyTableSequence extends TableSequence {
    public void onConnect() {
        qualifier = getDatasourcePlatform().getTableQualifier();
        super.onConnect();
}I apologize for the inconvenience,
Andrei

Problem loading an email from message list

When I click to open an email from the list (Inbox, Sent, etc.), I get: "There appears to be a problem loading the email "xxx". Retry". When I click on Retry, I get: "An unexpected problem has occurred. Performing your action again in a few moments will probably solve the problem. If it persists, we suggest you close this window and re-launch Yahoo! Mail." It does persist, but re-launching does not help. Please help me. Thanks.

This is because the SMTP server you have configured does not permit connections from off the ISP's network. When you are connecting via EDGE this is off-network from the perspective of the ISP.
Here are some hints from Apple on this problem:
http://docs.info.apple.com/article.html?path=iTunesWin/7.3/en/2637.html
You didn't say who your ISP is, but here are some common settings ISPs in various countries:
http://docs.info.apple.com/article.html?artnum=306990
As a last resort in the US you can set the outgoing SMTP server to cwmx.com:25 with no user ID or password. This will work on EDGE only, not on WiFi.

Problem in running code from web service

All,
We are experiencing a problem while running a code from a web service. The code based on ecliselink. The same code works from JUnit. When running from webservice, we observed the the following warning
*0 WARN [[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'] openjpa.Runtime - The configuration property named "openjpa.Id" was not recognized and will be ignored, although the name closely matches a valid property called "openjpa.Id".*
*0 INFO [[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'] openjpa.Runtime - Starting BEA Kodo 4.2.0*
Does this mean it is picking kodo implementation? Our expectation is to use eclipselink implementation. What could this warning? Any pointers would be of great help.
Thanks,

Sounds like it is using Kodo, is anything from EclipseLink logged?
Have you configured your JPA provider in your persistence.xml? If you have not, then you will just get the default.
James : http://ww.eclipselink.org

How to load a code from wufoo to iweb through html

i am trying to load a registration form from wufoo to iweb and cant figure out how to do it. I dont know where to find my html from iweb to load the code. When the code is in how do i see if it works or not. Thanks so much jacob

When you login to wufoo you get to a page called "Form Manager"
On this page you find the list of your Forms
Click on "Code" near the form of interest
Copy the code
Go to iWeb
Choose Web Widgets=>HTML Snippet
(or go to Insert=>HTML Snippet)
and paste the code in the black window that appeared
Click on "Apply" and you form will display in iWeb.
Regards,
Cédric

Problem with writing code from template based file

Hey there! Thanks for taking a look at this:
I have a page that I created New> From template.
I'm in Split view and I'm manually going in and placing my cursor where I want to add some content. Ive tried writing a <br> tage and inserting a Div.
I'm inserting this code right before the closing <div> tag that my editable region ends, its clearly in the right spot, within my editable region in the template, but I'm getting an error from dreamweaver that says it's not. This seems to only be happening when I edit the code directly. If I insert code through the menu's in design view I don't get this message.
I'm using CS5 on a Mac
What do I Do?

> making this change would require changing code that is locked by a template
> or a translator. The change will be discarded
This 'generic' error message happens as follows -
1. You open a page that is controlled by a Template
2. You make a change to that page, forcing the template engine to run through the page looking for things to potentially change (this is normal)
3. While doing this scan, the Template engine finds an unspecified number of coding errors and attempts to fix them
4. If it tries to fix an error that is a) in a non-editable region of the page, or b) in a Library item, it cannot do so, and throws the error
So - the first questions are these:
1. Does the template validate when you go here - http://validator.w3.org - and paste the code from the page into the Direct Input tab?
2. Do the Library items contain <html>, <head>, or <body> tags?
If the answer to either of those is "yes" then we will have to see the page and the code to guide you further.

Problem loading image icons from jar

I have created an Applet , that works as an application too.I created the certificate the jar, with the images and the classes, i signed it... The html page is working fine as the exe i have made from the jar, but ONLY if the folder with the images is in the same directory!!!I have searched in java and other forums for an answer that fits but..
Here is a sample of my code.
images[0]=new ImageIcon((Applet15.class.getResource("/palaio/Image8.jpg")));
images[1]=new ImageIcon((Applet15.class.getResource("/palaio/Image22.jpg")));
images[2]=new ImageIcon((Applet15.class.getResource("/palaio/Image30.jpg")));
images[3]=new ImageIcon((Applet15.class.getResource("/palaio/Image36.jpg")));
images[4]=new ImageIcon((Applet15.class.getResource("/palaio/Image42.jpg")));
images[5]=new ImageIcon((Applet15.class.getResource("/palaio/Image63.jpg")));
public Applet15() {
      private void jbInit() throws Exception {
public String getAppletInfo() {
    return "Applet Information";
public String[][] getParameterInfo() {
    return null;
public static void main(String[] args) {
    Applet15 applet = new Applet15();
    applet.isStandalone = true;
    Frame frame;
    frame = new Frame();
    frame.setTitle("Applet Frame");
    frame.add(applet, BorderLayout.CENTER);
    applet.init();
    applet.start();
    frame.setSize(450,400);
    Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
    frame.setLocation((d.width - frame.getSize().width) / 2, (d.height - frame.getSize().height) / 2);
    frame.setVisible(true);Thank you!!

This tutorial should resolve the problem
http://java.sun.com/docs/books/tutorial/applet/appletsonly/data.html

Having problem loading the gif from a jar for the frame.

I got the gif showing up for the Toolbar fine but now trying to get the Frame icon from the same jar and having the problem.
I have the following method in the MainFrame.
* Load an ImageIcon, either from inside the jar file (during the normal execution)
* or from the source path (during the development without jar file).
public static synchronized ImageIcon LoadImageIcon(String name) {
try {
URL url = ClassLoader.getSystemResource(name);
if(url!=null) {
return new ImageIcon(Toolkit.getDefaultToolkit().getImage(url));
} else {
return new ImageIcon(name);
} catch(Exception e) {
return null;
I gave the following in the constructor of the same class i.e the MainFrame which is extending the JFrame
this.setIconImage(LoadImageIcon("frameicon.gif").getImage());
I am not getting the Icon. I did check the name of icon and I don't know what else to check.
Any suggesions or what am I missing here? Thanks.

I have these 2 statements one below the other and
JButton btnNew = new JButton(MainFrame.LoadImageIcon("new.gif"));
JButton btnOpenProject = new JButton(MainFrame.LoadImageIcon("open.gif"));
for the above it gets the icon and for the below it doesn't from the jar. Why is it so? I don't understand. help me thru this. I am not getting any icon except for the new.gif. What am I doing wrong here? Thanks.

Problem loading & displaying images from URL

hi,
I can't manage to display an image into a component from a url... here is what my code looks like :
public class ImageComponent extends JComponent{
    private ImageIcon imageIcon;
    public void paint(Graphics g){
        if(imageIcon!=null){
            imageIcon.paintIcon(this, g, posX, posY);
    private void loadsImage(String imageURL){
        imageIcon = new javax.swing.ImageIcon(imageURL);
        invalidate();
}when I call loadImage with a proper url, the image doesn't seem to be loaded...
it might be that the image is big and long to come (also my connection isn't that fast)... but forcing the repaint of the component (by hiding/showin the component's window) after a good while doesn't do much...
can anybody tell me where I'm doing wrong...
cheers,
DrLeinster

hi,
looks like PaintComponent() instead of paint did the job.
thanks a million..
for those interested in loading images, I find ImageIcon very limited and at the end I found a better solution :
public class ImageComponent extends JComponent implements ImageObserver{
    private Image image;
    public void loadImage(URL imageURL){
            image = Toolkit.getDefaultToolkit().getImage(imageURL);
            prepareImage(image,getWidth(),getHeight(), this);
    public boolean imageUpdate(Image img, int infoflags, int x, int y, int width, int height){
        System.out.print("."); // loading progress...
    public void paintComponent(Graphics g){
        if(image!=null){
             g.drawImage(image,0,0,null);
}it is far nicer as it displays dots while loading... up to you to attach progress bars or favorit loading guizmo...
DrLeinster.

I have problem loading all items from XML with for each

Hi all,
I'm low level as3 programmer and I need help whit this code:
I have gallery XML file:
<gallery>
    <item>
        <id>1</id>
        <strana>0</strana>
        <naslov>Lokacije</naslov>
        <aktuelno>1</aktuelno>
        <slika>1.jpg</slika>
    </item>
    <item>
        <id>2</id>
        <strana>2</strana>
        <naslov>Coaching</naslov>
        <aktuelno>1</aktuelno>
        <slika>2.jpg</slika>
    </item>
    <item>
        <id>3</id>
        <strana>0</strana>
        <naslov><![CDATA[O.Å . Bratstvo - panel]]></naslov>
        <aktuelno>0</aktuelno>
        <slika>3.jpg</slika>
    </item>
</gallery>
And:
var loader: URLLoader = new URLLoader();
     loader.load(new URLRequest("gallery.xml");
var xml = new XML(evt.target.data);
    for each(var item in xml..item) {
        centralniText.htmlText = item.slika;
only shows last item from XML file:
3.jpg
I want all. Please help.

can adding count item in XML help somehow?
<gallery>
    <item>
        <id>1</id>
        <strana>0</strana>
        <naslov>Lokacije</naslov>
        <aktuelno>1</aktuelno>
        <slika>1.jpg</slika>
    </item>
    <item>
        <id>2</id>
        <strana>2</strana>
        <naslov>Coaching</naslov>
        <aktuelno>1</aktuelno>
        <slika>2.jpg</slika>
    </item>
    <item>
        <id>3</id>
        <strana>0</strana>
        <naslov><![CDATA[O.Å . Bratstvo - panel]]></naslov>
        <aktuelno>0</aktuelno>
        <slika>3.jpg</slika>
    </item>
    <last>3</last>
</gallery>

Problem-Loading Byte code from DB

Similar Messages

Maybe you are looking for