Problem loading query

We modified an existing query by adding some additional sections to it.
The  new query will run on the developer's computer
When I try to publish the bqy module on the server , I get "processing " for more than an hour
before I cancel it.
is there a limit on the number of sections or the number of intermediate results ?
We are at 11.1.1.3
thanks

Hi Vishal,
1) Try to remove the addin and then add again.(Before doing this close all the excel process from the task Manager)
2) Check weather essexcln.xll and essxleqd.xla are corrupted.

Similar Messages

  • Problem loading Query Designer Add-in

    Hi All,
    Can anyone please help me on my below issue.
    Whenever user is trying to start a new query in Essbase , he is getting below error message. It will not allow user to build a fresh Essbase pull
    Problem loading Query Designer Add-in. Workbook Activate,open & close operations may not be fully propogated
    Thanks in advance.
    Regards
    Vishal

    Hi Vishal,
    1) Try to remove the addin and then add again.(Before doing this close all the excel process from the task Manager)
    2) Check weather essexcln.xll and essxleqd.xla are corrupted.

  • Problem Loading Large XML Doc

    I'm running 10.2.0.3 on a Linux box and I'm having problems loading a large XML document (about 100 MB). In the past, I would simply load the XML file into a XMLType column like this:
    INSERT INTO foo VALUES (XMLType(bfilename('XMLDIR', 'test.xml'). nls_charset_id('AL32UTF8')));
    But when I try this with a large file, it runs for 10 minutes and then returns an ORA-03113. I'm assuming the file is just too large for this technique. I spoke to Mark Drake when I was at OpenWorld and he suggested I use Oracle XML DB, so I created and registered a schema and tried using sqlldr to load the doc, but it ran for 2 1/2 hours before returning:
    Parse Error on row 1 in table FOO
    OCI-31038: Invalid integer value: "129"
    I tried simplifying both the XML file and schema to just the following:
    <schedules>
    <s s="2009-09-21T04:00:00" d="21600" p="335975" c="19672"/>
    <s s="2009-09-21T04:00:00" d="21600" p="335975" c="15387"/>
    <s s="2009-09-21T04:00:00" d="25200" p="335975" c="5256"/>
    <s s="2009-09-21T04:00:00" d="86400" p="335975" c="26198">
    <k id="5" v="2009-09-21 09:00:00.000"/>
    <k id="6" v="2009-09-22 03:59:59.000"/>
    <k id="26" v="0.00"/><k id="27" v="US"/>
    </s>
    <s s="2009-09-21T04:00:00" d="21600" p="335975" c="11678"/>
    <s s="2009-09-21T04:00:00" d="21600" p="335975" c="26697"/>
    <s s="2009-09-21T04:00:00" d="21600" p="335975" c="25343"/>
    <s s="2009-09-21T04:00:00" d="21600" p="335975" c="25269"/>
    <s s="2009-09-21T04:00:00" d="86400" p="335975" c="26200">
    <k id="5" v="2009-09-21 09:00:00.000"/>
    <k id="6" v="2009-09-22 03:59:59.000"/>
    <k id="26" v="0.00"/><k id="27" v="US"/>
    </s>
    </schedules>
    <?xml version="1.0" encoding="UTF-8"?>
    <!--W3C Schema generated by XMLSpy v2008 sp1 (http://www.altova.com)-->
    <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
         xmlns:xdb="http://xmlns.oracle.com/xdb"
        version="1.0"
        xdb:storeVarrayAsTable="true">
         <xs:element name="schedules" xdb:defaultTable="SCHEDULES">
              <xs:complexType xdb:SQLType="SCHEDULES_T">
                   <xs:sequence>
                        <xs:element ref="s" maxOccurs="unbounded"/>
                   </xs:sequence>
              </xs:complexType>
         </xs:element>
         <xs:element name="s">
              <xs:complexType>
                   <xs:choice minOccurs="0">
                        <xs:element ref="f" maxOccurs="unbounded"/>
                        <xs:element ref="k" maxOccurs="unbounded"/>
                   </xs:choice>
                   <xs:attribute name="s" use="required" type="xs:dateTime"/>
                   <xs:attribute name="p" use="required" type="xs:int"/>
                   <xs:attribute name="d" use="required" type="xs:int"/>
                   <xs:attribute name="c" use="required" type="xs:short"/>
              </xs:complexType>
         </xs:element>
         <xs:element name="k">
              <xs:complexType>
                   <xs:attribute name="v" use="required" type="xs:string"/>
                   <xs:attribute name="id" use="required" type="xs:byte"/>
              </xs:complexType>
         </xs:element>
         <xs:element name="f">
              <xs:complexType>
                   <xs:attribute name="id" use="required" type="xs:byte"/>
              </xs:complexType>
         </xs:element>
    </xs:schema>
    Keep in mind both the actual XML file and corresponding XSD is much more complex, but this particular section is about 70 MB so I wanted to see if I could just load that.  I used the following sqlldr script:
    LOAD DATA
    INFILE *
    INTO TABLE schedules_tmp TRUNCATE
    XMLType(xml_doc)(
         lobfn FILLER CHAR TERMINATED by ',',
         xml_doc LOBFILE(lobfn) TERMINATED BY EOF
    BEGINDATA
    /tmp/schedules.xmlThis worked fine on a small doc - loaded correctly and I could query it fine - but when I tried using the 70 MB file it ran for a couple of hours before dying with a memory problem.
    So what am I doing wrong? Is there a better way to load a large file?
    Thanks for the help.
    Pete
    Edited by: mdrake on Nov 9, 2009 8:46 PM

    Mark:
    Answers to your questions:
    Do you use direct load ? -> Yes. I tried again using UNRECOVERABLE LOAD DATA to try to speed up performance, but it still ran for a couple of hours before dying.
    Which DB Release are you working with ? -> 10.2.0.3
    Can you see if you can upload via FTP ? -> I added noNamespaceSchemaLocation to my XML file and ftp'd it to my XML directory, but it wasn't recognized. Is there something else I have to do?
    The change for unsignedInt should have code rid of the issue with the value 129. Did it ? -> I didn't try it again on the whole XML file (I'm just working with the schedules section), so I haven't verified this.
    I'm still stumped as to why sqlldr takes so long. I could write something to parse the XML file into a flat file and then use sqlldr to load it into a relational table, and the load would only take a few minutes. But then I wouldn't be using XML DB which I thought would be faster. What am I doing wrong?
    Pete

  • When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

    When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

  • Unable to load Query Builder component

    Hello,
    When I try to refresh a report in Crystal Reports 10, it displays this error message:
    "Failed to load database information."
    "Details: Unable to load Query Builder component."
    Then, when I try to register querybuilder.dll, RegSvr32 gives this error:
    "querybuilder.dll was loaded, but the DllRegisterServer entry point was not found."
    Any ideas?
    Thank you in advance for your help.

    Graham,
    Thank you for your reply.
    This is a new install.
    As my PC's administrator, I tried as you suggested.  However, I am still getting this error message when I try to run an existing report:
    "Failed to load database information."
    "Details: Unable to load Query Builder component."
    Guy

  • Cannot directly open the browser from the icon. "problem loading webpage" and "timed out" are the messages. Access was accomplished by using yahoo messenger and opening my email. if I attempt to open a new page, I recieve the aforementioned warnings.

    no link to open access to the internet. I used Yahoo Messenger, clicked on the 'mail icon' and since Firefox is my default it opened and I was able to continue from there. If I try to click File, open New Page, I get the "problem loading webpage" and "connection timed out" messages

    changed my homepage to Yahoo. Now Firrefox works but still cannot access ANYTHING 'Google"!

  • I get problem loading page (error 404) it says the page cannot be found when i try to access the game Mobsters through my mysapce account and i cannot access it no longer through firefox and i want to find out why i cant, can you guys please help?

    i cant access my mobsters account through myspace. every time i try to access it i get "problem loading page" "this page cannot be found" "404 error" and it wont let me access it. myspace works fine but as soon as i click on the mobsters app i get the 404 error, this page cannot be found, problem loading page! can you please help?
    == This happened ==
    Every time Firefox opened
    == i try to access mobsters game through myspace

    I dont understand the answer
    '''''""The problem can be solved by opening FF and choosing Tools...Add On's...select the SEARCH addon and choose UNINSTALL...restart FF browser when asked, then reload Mobsters. This worked for me. The suggestion on the 404 that says to remove Search via Add/Remove Programs is completely BS, as Search doesnt show there. ""'''''

  • A lot of tabs loads and tells me there was a problem loading the page. How can I stop all the tabs loading because ist slows down Firefox.

    When I open Firefox, a lot of tabs try to open at the same time. They all say Problem loading the page. It happened after I tried to download a owners manual for Harley Davidson motor cycles. How can I stop all but one tab from opening.

    This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
    See:
    * http://kb.mozillazine.org/Session_Restore

  • View with columns based on function - problem with query

    Hi,
    I'm using Oracle 9i;
    I've created a view which has columns based on a table columns (multiple columns from 1 table) and funtion (multiple columns based on 1 function).
    The function takes ID as the first argument and name of the column to determine which value to return as the second one.
    Here is a sample of such function (simplified):
    FUNCTION my_function
    (in_id IN NUMBER, in_col_name IN VARCHAR2)
    RETURN VARCHAR2
    IS
    c_name VARCHAR2(100);
    c_last_name VARCHAR2(100);
    BEGIN
    SELECT T.NAME, T.LAST_NAME
    INTO c_name, c_last_name
    FROM TABLE_1 T, TABLE_2 Z
    WHERE T.PK = Z.FK
    AND Z.ID = in_id;
    IF in_col_name = 'NAME' THEN
    RETURN c_name;
    ELSIF in_col_name = 'LAST_NAME' THEN
    RETURN c_last_name;
    END IF;
    END;
    For simplicty I've restricted the number of columns.
    CREATE OR REPLACE VIEW my_view
    (ID, NAME, LAST_NAME)
    AS
    SELECT
    T.ID ID
    ,CAST(my_function(T.ID,'NAME') AS VARCHAR2(100)) NAME
    ,CAST(my_function(T.ID,'LAST_NAME') AS VARCHAR2(100)) LAST_NAME
    FROM TABLE T;
    There is no problem with query:
    SELECT * FROM my_view;
    The problem arises when I query the view (regardles of '=' or 'LIKE'):
    SELECT * FROM my_view
    WHERE name LIKE '%some_part_of_name%'
    The query returns rows for same names, for same it doesn't. If I put '=' and the whole name the query returns nothing, but when I put 'LIKE' and the first letter it returns rows in some cases.
    I've tried to debug this situation and I've discovered that the function recives ID not in the proper order and not the same amount of times - in explicit:
    for each ID in (1, 2, 3, 4, 5, 6, ... , 100) the function should be called twice for each ID and in the same order, but it does not.
    I get 1, 1, 2, 3, 3, 6, 20, 20 and so on.
    Help needed.
    Greetings.

    The problem is more complicated than the solutions provided here.
    The reason why I'm using the function is this:
    the original view was constructed using multiple union all selects and the speed was terrible. I've created the index on the base table to obtain a proper sort. For retriving all records at once the view works perfectly, but if one wants to query by columns based on function the results are suprisng - sometimes there are, some times there are none, or if you serch with "like" and only a part of string there are results, but with "=" there are no results.
    Here are real DDLs:
    View:
    CREATE OR REPLACE VIEW V_DOK_ARCH
    (ID_ZDAR, TYP, STAN, DATE_CREATED, CREATED_BY,
    DATE_MODIFIED, MODIFIED_BY, SPRA_ID_SPRA, PODM_ID_PODM, PODM_UMOW_ID_UMOW,
    NR_WFS, WFS_NR_INTER, UWAGI_OPER, FUNDUSZ, NUMER,
    DATA_PODPISANIA, RODZAJ, TYP_PRZY, TYP_UBEZ, NAZWISKO,
    IMIE, IMIE_OJCA, NAZWA_FIRMY, NAZWA_FIRMY_SKR, DANE_KLIE)
    AS
    SELECT /*+ INDEX(Z ZDAR_DATE_CREATED_DESC_I) */
    Z.ID_ZDAR ID_ZDAR
    , Z.TYP TYP
    , Z.STAN STAN
    , Z.DATE_CREATED DATE_CREATED
    , Z.CREATED_BY CREATED_BY
    , Z.DATE_MODIFIED DATE_MODIFIED
    , Z.MODIFIED_BY MODIFIED_BY
    , Z.SPRA_ID_SPRA SPRA_ID_SPRA
    , Z.PODM_ID_PODM PODM_ID_PODM
    , Z.PODM_UMOW_ID_UMOW PODM_UMOW_ID_UMOW
    , Z.NR_WFS NR_WFS
    , Z.WFS_NR_INTER WFS_NR_INTER
    , Z.UWAGI_OPER UWAGI_OPER
    , Z.FUNDUSZ FUNDUSZ
    , CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NUMER') AS VARCHAR2(30)) NUMER
    , F_Rej_Zdar_Date(Z.ID_ZDAR, 'DATA_PODPISANIA') DATA_PODPISANIA
    , CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'RODZAJ') AS VARCHAR2(4)) RODZAJ
    , CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'TYP_PRZY') AS VARCHAR2(4)) TYP_PRZY
    , CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'TYP_UBEZ') AS VARCHAR2(3)) TYP_UBEZ
    , CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWISKO') AS VARCHAR2(30)) NAZWISKO
    , CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE') AS VARCHAR2(30)) IMIE
    , CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE_OJCA') AS VARCHAR2(30)) IMIE_OJCA
    , CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY') AS VARCHAR2(300)) NAZWA_FIRMY
    , CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY_SKR') AS VARCHAR2(100)) NAZWA_FIRMY_SKR
    , CAST(LTRIM(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWISKO')||' '||F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE')||' '||F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE_OJCA')||F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY')||DECODE(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY'),NULL,F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY_SKR'),NULL)) AS VARCHAR2(492)) DANE_KLIE
    FROM T_ZDARZENIA Z
    WHERE F_Rej_Zdar_Char(Z.ID_ZDAR, 'JEST') = 'T';
    and functions:
    CREATE OR REPLACE FUNCTION F_Rej_Zdar_Char
    (WE_ID_ZDAR IN NUMBER
    ,WE_KOLUMNA IN VARCHAR2
    RETURN VARCHAR2
    IS
    c_numer           T_PRZYSTAPIENIA.NUMER%TYPE;--VARCHAR2(30);
    c_rodzaj           T_KLIENCI.RODZAJ%TYPE;--VARCHAR2(1);
    c_typ_przy           T_PRZYSTAPIENIA.TYP_PRZY%TYPE;--VARCHAR2(1);
    c_typ_ubez           T_PRZYSTAPIENIA.TYP_UBEZ%TYPE;--VARCHAR2(3);
    c_nazwisko           T_KLIENCI.NAZWISKO%TYPE;--VARCHAR2(30);
    c_imie                T_KLIENCI.IMIE%TYPE;--VARCHAR2(30);
    c_imie_ojca      T_KLIENCI.IMIE_OJCA%TYPE;--VARCHAR2(30);
    c_nazwa_firmy      T_KLIENCI.NAZWA_FIRMY%TYPE;--VARCHAR2(300);
    c_nazwa_firmy_skr T_KLIENCI.NAZWA_FIRMY%TYPE;--VARCHAR2(100);
    c_jest                VARCHAR2(1) := 'T';
    c EXCEPTION;
    BEGIN
    --dbms_output.put_line('id zdar wykonania '||WE_ID_ZDAR);
    BEGIN
    SELECT p.NUMER, k.RODZAJ,p.TYP_PRZY,p.TYP_UBEZ,k.nazwisko, k.imie, k.imie_ojca, k.nazwa_firmy, k.nazwa_firmy_skr
    INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
    FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D1, T_PODMIOTY D2
    WHERE p.KLIE_ID_KLIE = k.ID_KLIE
    AND z.PODM_ID_PODM = D1.ID_PODM
    AND D1.KLIE_ID_KLIE = p.KLIE_ID_KLIE
    AND Z.PODM_UMOW_ID_UMOW = D2.ID_PODM
    AND D2.PRZY_ID_PRZY = P.ID_PRZY
    AND z.ID_ZDAR = WE_ID_ZDAR;
    EXCEPTION
         WHEN NO_DATA_FOUND THEN
         BEGIN
         SELECT p.NUMER, k.RODZAJ,p.TYP_PRZY,p.TYP_UBEZ,k.nazwisko, k.imie, k.imie_ojca, k.nazwa_firmy, k.nazwa_firmy_skr
         INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
         FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D
         WHERE z.PODM_UMOW_ID_UMOW IS NULL
         AND z.PODM_ID_PODM = D.ID_PODM
         AND D.KLIE_ID_KLIE = k.ID_KLIE
         AND p.KLIE_ID_KLIE = k.ID_KLIE
         AND z.ID_ZDAR = WE_ID_ZDAR;
         EXCEPTION
              WHEN NO_DATA_FOUND THEN
              BEGIN
              SELECT NULL NUMER, NULL RODZAJ,NULL TYP_PRZY,NULL TYP_UBEZ, I.nazwisko, I.imie, I.imie_ojca, I.NAZWA NAZWA_FIRMY, I.NAZWA_SKR nazwa_firmy_skr
              INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
              FROM T_ZDARZENIA z, T_INSTYTUCJE I
              WHERE Z.TYP IN ('WFS526','WFS542','WFS553','WFS609','WFS611','WYP_KS','WYP_PO','WYP_SB','DI_ZAT')
              AND z.PODM_UMOW_ID_UMOW IS NULL
              AND Z.PODM_ID_PODM = I.ID_INST
              AND z.ID_ZDAR = WE_ID_ZDAR;
              EXCEPTION
                   WHEN NO_DATA_FOUND THEN
                   BEGIN
                   SELECT p.NUMER NUMER, DECODE(a.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(a.TYP_AGENTA,'P','R',a.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,a.nazwisko, a.imie, a.imie_ojca, a.nazwa_firmy, a.nazwa_firmy_skr
                   INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
                   FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
                   WHERE a.ID_AGAG = p.AGAG_ID_AGAG
                   AND z.PODM_UMOW_ID_UMOW = p.ID_AGUM
                   AND z.ID_ZDAR = WE_ID_ZDAR;
                   EXCEPTION
                        WHEN NO_DATA_FOUND THEN
                        BEGIN
                        SELECT p.NUMER NUMER, DECODE(a.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(a.TYP_AGENTA,'P','R',a.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,a.nazwisko, a.imie, a.imie_ojca, a.nazwa_firmy, a.nazwa_firmy_skr
                        INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
                        FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
                        WHERE a.ID_AGAG = p.AGAG_ID_AGAG
                        AND z.PODM_ID_PODM = a.ID_AGAG
                        AND z.PODM_UMOW_ID_UMOW IS NULL
                        AND z.ID_ZDAR = WE_ID_ZDAR;
                        EXCEPTION
                             WHEN NO_DATA_FOUND THEN
                             BEGIN
                             SELECT p.NUMER_UMOWY NUMER, DECODE(p.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(p.TYP_AGENTA,'P','R',p.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,p.nazwisko, p.imie_pierwsze, p.imie_ojca, p.nazwa_firmy, p.nazwa_firmy_skr
                             INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
                             FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
                             WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
                             AND z.PODM_UMOW_ID_UMOW = p.TECH_ID_AGUMT
                             AND z.ID_ZDAR = WE_ID_ZDAR;
                             EXCEPTION
                                  WHEN NO_DATA_FOUND THEN
                                  BEGIN
                                  SELECT p.NUMER_UMOWY NUMER, DECODE(p.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(p.TYP_AGENTA,'P','R',p.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,p.nazwisko, p.imie_pierwsze, p.imie_ojca, p.nazwa_firmy, p.nazwa_firmy_skr
                                  INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
                                  FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
                                  WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
                                  AND z.PODM_ID_PODM = a.ID_AGKAN
                                  AND z.PODM_UMOW_ID_UMOW IS NULL
                                  AND z.ID_ZDAR = WE_ID_ZDAR;
                                  EXCEPTION
                                       WHEN NO_DATA_FOUND THEN
                                       BEGIN
                                       SELECT k.NUMER_UMOWY NUMER, DECODE(k.TYP_PRZYSTAPIENIA,'P','F','P') RODZAJ,k.TYP_PRZYSTAPIENIA TYP_PRZY,'NPO' TYP_UBEZ, k.nazwisko, k.imie_pierwsze, k.imie_ojca, k.nazwa_firmy nazwa_firmy, k.nazwa_firmy_skr nazwa_firmy_skr
                                       INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
                                       FROM T_WE_UM_NPO_TAB k, T_ZDARZENIA z
                                       WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
                                       AND k.TYP_PRZYSTAPIENIA IN ('P','W')
                                       AND z.PODM_ID_PODM IS NULL
                                       AND z.PODM_UMOW_ID_UMOW IS NULL
                                       AND z.ID_ZDAR = WE_ID_ZDAR;
                                       EXCEPTION
                                            WHEN NO_DATA_FOUND THEN
                                            BEGIN
                                            SELECT k.NUMER_UMOWY NUMER, 'F' RODZAJ,'-' TYP_PRZY,'OPS' TYP_UBEZ, k.nazwisko, k.imie_pierwsze, k.imie_ojca, NULL nazwa_firmy, NULL nazwa_firmy_skr
                                            INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
                                            FROM T_WE_UM_OPS_TAB k,T_ZDARZENIA z
                                            WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
                                            AND z.PODM_ID_PODM IS NULL
                                            AND z.PODM_UMOW_ID_UMOW IS NULL
                                            AND z.ID_ZDAR = WE_ID_ZDAR;
                                            EXCEPTION
                                                 WHEN NO_DATA_FOUND THEN
                                                 BEGIN
                                                 SELECT NULL NUMER, NULL RODZAJ,NULL TYP_PRZY,NULL TYP_UBEZ, NULL nazwisko, NULL imie_pierwsze, NULL imie_ojca, NULL nazwa_firmy, NULL nazwa_firmy_skr
                                                 INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
                                                 FROM T_ZDARZENIA z
                                                 WHERE z.TYP NOT IN ('UM_OPS','UM_NPO','NPO_OP','UZUP_U')
                                                 AND z.PODM_ID_PODM IS NULL
                                                 AND z.PODM_UMOW_ID_UMOW IS NULL
                                                 AND z.ID_ZDAR = WE_ID_ZDAR;
                                                 EXCEPTION
                                                      WHEN NO_DATA_FOUND THEN
                                                           --dbms_output.put_line('id zdar wykonania '||WE_ID_ZDAR||' ostatni wyjatek');
                                                           NULL;
                                                 END;
                                            END;
                                       END;
                                  END;
                             END;
                        END;
                   END;
              END;
         END;
    END;
    --raise c;
    IF WE_KOLUMNA = 'NUMER' THEN
    RETURN c_numer;
    ELSIF WE_KOLUMNA = 'RODZAJ' THEN
    RETURN c_rodzaj;
    ELSIF WE_KOLUMNA = 'TYP_PRZY' THEN
    RETURN c_typ_przy;
    ELSIF WE_KOLUMNA = 'TYP_UBEZ' THEN
    RETURN c_typ_ubez;
    ELSIF WE_KOLUMNA = 'NAZWISKO' THEN
    RETURN c_nazwisko;
    ELSIF WE_KOLUMNA = 'IMIE' THEN
    RETURN c_imie;
    ELSIF WE_KOLUMNA = 'IMIE_OJCA' THEN
    RETURN c_imie_ojca;
    ELSIF WE_KOLUMNA = 'NAZWA_FIRMY' THEN
    RETURN c_nazwa_firmy;
    ELSIF WE_KOLUMNA = 'NAZWA_FIRMY_SKR' THEN
    RETURN c_nazwa_firmy_skr;
    ELSIF WE_KOLUMNA = 'JEST' THEN
    RETURN c_jest;
    END IF;
    END;
    CREATE OR REPLACE FUNCTION F_Rej_Zdar_Date
    (WE_ID_ZDAR IN NUMBER
    ,WE_KOLUMNA IN VARCHAR2
    RETURN DATE
    IS
    d_data DATE;
    BEGIN
    BEGIN
    SELECT p.DATA_PODPISANIA
    INTO d_data
    FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D1, T_PODMIOTY D2
    WHERE p.KLIE_ID_KLIE = k.ID_KLIE
    AND z.PODM_ID_PODM = D1.ID_PODM
    AND D1.KLIE_ID_KLIE = p.KLIE_ID_KLIE
    AND Z.PODM_UMOW_ID_UMOW = D2.ID_PODM
    AND D2.PRZY_ID_PRZY = P.ID_PRZY
    AND z.ID_ZDAR = WE_ID_ZDAR;
    EXCEPTION
         WHEN NO_DATA_FOUND THEN
         BEGIN
         SELECT p.DATA_PODPISANIA
         INTO d_data
         FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D
         WHERE z.PODM_UMOW_ID_UMOW IS NULL
         AND z.PODM_ID_PODM = D.ID_PODM
         AND D.KLIE_ID_KLIE = k.ID_KLIE
         AND p.KLIE_ID_KLIE = k.ID_KLIE
         AND z.ID_ZDAR = WE_ID_ZDAR;
         EXCEPTION
              WHEN NO_DATA_FOUND THEN
              BEGIN
              SELECT NULL DATA_PODPISANIA
              INTO d_data
              FROM T_ZDARZENIA z, T_INSTYTUCJE I
              WHERE Z.TYP IN ('WFS526','WFS542','WFS553','WFS609','WFS611','WYP_KS','WYP_PO','WYP_SB','DI_ZAT')
              AND z.PODM_UMOW_ID_UMOW IS NULL
              AND Z.PODM_ID_PODM = I.ID_INST
              AND z.ID_ZDAR = WE_ID_ZDAR;
              EXCEPTION
                   WHEN NO_DATA_FOUND THEN
                   BEGIN
                   SELECT p.DATA_PODPISANIA DATA_PODPISANIA
                   INTO d_data
                   FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
                   WHERE a.ID_AGAG = p.AGAG_ID_AGAG
                   AND z.PODM_UMOW_ID_UMOW = p.ID_AGUM
                   AND z.ID_ZDAR = WE_ID_ZDAR;
                   EXCEPTION
                        WHEN NO_DATA_FOUND THEN
                        BEGIN
                        SELECT p.DATA_PODPISANIA DATA_PODPISANIA
                        INTO d_data
                        FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
                        WHERE a.ID_AGAG = p.AGAG_ID_AGAG
                        AND z.PODM_ID_PODM = a.ID_AGAG
                        AND z.PODM_UMOW_ID_UMOW IS NULL
                        AND z.ID_ZDAR = WE_ID_ZDAR;
                        EXCEPTION
                             WHEN NO_DATA_FOUND THEN
                             BEGIN
                             SELECT p.DATA_PODPISU_AGENTA DATA_PODPISANIA
                             INTO d_data
                             FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
                             WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
                             AND z.PODM_UMOW_ID_UMOW = p.TECH_ID_AGUMT
                             AND z.ID_ZDAR = WE_ID_ZDAR;
                             EXCEPTION
                                  WHEN NO_DATA_FOUND THEN
                                  BEGIN
                                  SELECT p.DATA_PODPISU_AGENTA DATA_PODPISANIA
                                  INTO d_data
                                  FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
                                  WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
                                  AND z.PODM_ID_PODM = a.ID_AGKAN
                                  AND z.PODM_UMOW_ID_UMOW IS NULL
                                  AND z.ID_ZDAR = WE_ID_ZDAR;
                                  EXCEPTION
                                       WHEN NO_DATA_FOUND THEN
                                       BEGIN
                                       SELECT k.DATA_PODPISANIA_UM DATA_PODPISANIA
                                       INTO d_data
                                       FROM T_WE_UM_NPO_TAB k, T_ZDARZENIA z
                                       WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
                                       AND k.TYP_PRZYSTAPIENIA IN ('P','W')
                                       AND z.PODM_ID_PODM IS NULL
                                       AND z.PODM_UMOW_ID_UMOW IS NULL
                                       AND z.ID_ZDAR = WE_ID_ZDAR;
                                       EXCEPTION
                                            WHEN NO_DATA_FOUND THEN
                                            BEGIN
                                            SELECT k.DATA_PODPISANIA_UM DATA_PODPISANIA
                                            INTO d_data
                                            FROM T_WE_UM_OPS_TAB k,T_ZDARZENIA z
                                            WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
                                            AND z.PODM_ID_PODM IS NULL
                                            AND z.PODM_UMOW_ID_UMOW IS NULL
                                            AND z.ID_ZDAR = WE_ID_ZDAR;
                                            EXCEPTION
                                                 WHEN NO_DATA_FOUND THEN
                                                 BEGIN
                                                 SELECT NULL DATA_PODPISANIA
                                                 INTO d_data
                                                 FROM T_ZDARZENIA z
                                                 WHERE z.TYP NOT IN ('UM_OPS','UM_NPO','NPO_OP','UZUP_U')
                                                 AND z.PODM_ID_PODM IS NULL
                                                 AND z.PODM_UMOW_ID_UMOW IS NULL
                                                 AND z.ID_ZDAR = WE_ID_ZDAR;
                                                 EXCEPTION
                                                      WHEN NO_DATA_FOUND THEN
                                                           d_data := NULL;
                                                 END;
                                            END;
                                       END;
                                  END;
                             END;
                        END;
                   END;
              END;
         END;
    END;
    IF WE_KOLUMNA = 'DATA_PODPISANIA' THEN
    RETURN d_data;
    END IF;
    END;

  • Problem loading data into write optimized dso.....

    Hi ,
    I am having problem loading the data from PSA to write optimised DSO
    I have changed the normal DSO into a Write Optimised DSO. I have 2 data sources to be loaded into the write optimized DSO. One for Demand and one for Inventory.
    The loading of Demand data from PSA to DSO happens fine with out any error.
    Now while loading the Inventory data from PSA to DSO , i get the below errors
    "Data Structures were changed. Start Transaction before hand"
    Execption CX_RS_FAILED Logged
    I have tried reactivating the DSO, Transformation, DTP and tried to load the data again to the write optimised DSO, but no luck, I get the above error message always.
    Can some one please suggest me what could be done to avoid the above error messages and load the data successfully.
    Thanks in advance.

    Hi,
    Check the transformations is there any routines written.
    Check your Data struture of cube and DS as well.
    Is there any changes in structure.
    Data will load upto PSA normally, if is there any changes in struture of DSO, then the error may occur.just check it.
    Check the below blog:
    /people/martin.mouilpadeti/blog/2007/08/24/sap-netweaver-70-bi-new-datastore-write-optimized-dso
    Let us know status.........
    Reg
    Pra

  • TS3212 Is anyone else having problems loading the newest version of iTunes (10.6.3) on Windows?

    Is anyone having problems loading the newest version of iTunes (10.6.3) using Windows Vista? My current iTunes program version 10.6.1 keeps telling me there is an update but when I try to load it the information box goes away and nothing happens.  I have tried downloading the new version from Apple web site but it brings up a warning screen of " iTunes setup.exe is not commonly downloaded and could harm your computer." I select the action of run anyway and get the next error "iTunes Setup.exe is not a valid Win32 application."  What Gives?

    I select the action of run anyway and get the next error "iTunes Setup.exe is not a valid Win32 application."
    In the course of your troubleshooting to date have you worked through the following document?
    iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

  • . I am new to IPods. I have a Classic 160GB and I can't figure out how to load my music videos to it. I have had no problem loading my music CD's but no go with the music videos I have. Please HELP. Thanks maxsdad

    Hello:
    I am new to IPods. I have a Classic 160GB and I can't figure out how to load Music Videos to iTunes or the IPod. I have had no problem loading my CD's to iTunes and to the IPod, but no go on the Music Videos.
    Please Help
    maxsdad

    B-Rock:
    Ok. Here's the results. I tried all the music videos I wanted to put onto the IPod and the results were:
    I was able to get good results with 2 full length music videos and 2 video singles(only 2 videos on each disk). For a total of 4 videos.
    I was able to encode 5 full length music videos, but the results were distorted (video and audio).
    I was unable to copy 2 full length videos due to error failures. 1 was a "No Title Found" error, the other was a "NAVDAT" error.
    I guess my next question is: Do you know of any other program(s) that I might try, to see if I can get good results with the videos that didn't work with Handbrake?
    Thanks again for all your help.
    maxsdad

  • "Problem with Trial - problem loading trial period for Adobe Photoshop CS3"

    Hello,
    I installed Photoshop CS3 Trial and whenever I run it and choose to begin my trial period I get the following error message:
    "Problem with Trial - problem loading trial period for Adobe Photoshop CS3".
    I tried uninstalling and reinstalling, and even ran the Adobe CS3Clean Script but nothing seems to help.
    I should note I never installed any earlier version of Photoshop on my system (I use a fresh copy of Windows XP with only a few programs installed).
    Any suggestions will be appreciated.
    Thanks,
    David

    i had the trial of photoshop on and the trial has run out my friend has given me a disk with adobe photoshop on and i cant do it beacause of the regestry code the photoshop puts in after the trial has ended to tell my pc that i cant have photoshop on my computer again :(:( now i have herd that you can remove the codes but it is quite hard well iam willing for this challenge and if anyone could help me i would reall welcome your help or if anybody has got the link to a tutorial to tell me hoe to do it i would aprecitae that to thank you all very much and post bak soon please

  • Latest version of Firefox is having problems loading sites, it tries to load to Google Analytics. No error messages, just a page that won't load. How do I stop this?

    Latest version of Firefox is having problems loading some sites, it tries to load and then gets taken over trying to load Google Analytics. No error messages, just a page that won't load. How do I get rid of this, it is a "pain in the neck"
    == URL of affected sites ==
    http://

    I just spent 3 days with this issue as well. I finally fixed it by reluctantly adding yet another add-on called ADBLOCK
    I was able to selectively block google-analytics. Now pages that weren't loading before are now loading.
    eg vimeo.com starbucks.com & other random sites.
    This was a tough one to fix because there is NO ERROR MESSAGE..page just shows it's loading...forever..& the bottom of my browser says 'waiting for google analytics'. I finally figured out google analytics is the culprit. Ironically, some help pages in trying to find a fix wouldn't load for me due to google analytics arghhh!
    Im on a macbookpro & Safari worked fine for these same sites. It was just Firefox. I nearly switched back to Safari because of this stupid issue.
    I'm wondering if this was caused by recent firefox 'updates'...

  • Cannot open grooveshark due to a supposed problem loading flash. (I have the latest version of both (Mozilla and Flash)

    Everything with firefox works ok except Grooveshark. An error message appears saying: We had problems loading flash, you might have any blocker etc etc.
    I don´t have any blocker and as a matter of fact i have the latest versions for both mozilla and flash. Neither version of flash test nor reinstallation process nor checking add ons or firewall settings solved my problem.
    Thanks for the attention. Regards

    To double-check your Flash permissions for the site, you can click the globe or padlock icon to the left of the address, click More Information, then click the Permissions tab. The "Activate Plugins" section would be the one to check.
    I understand you have checked your add-ons, but in case there is an unexpected interaction, could you test the page in Firefox's Safe Mode just to confirm that extensions are not the problem? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    ''Not all add-ons are disabled: Flash and other plugins still run''
    After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Any difference?

Maybe you are looking for

  • Please help me avoid twisting my head off trying to create a video of iphone screenshots that will play on an iphone

    I'm trying to create some job aid videos for a client. Some of these are going to be how to do things on their iphones. I've used the screencapture facility on my phone to snap a dozen or so screen caps. I've moved them to my PC I've buit a project (

  • Error in installation of 11g

    hi gurus as i am installing oracle11gR2 on aix. i confirmed all pre-requisites all is fine now i am running runInstaller so it is giving below error $ ./runInstaller Your platform requires the root user to perform certain pre-installation OS preparat

  • Error .. Cannot create oracle 10.1.0.2.0 database on solaris 10

    Hi, I successfully installed Oracle 10.1.0.2.0 on my Solaris v 5.10 workstation but when I attempt to create a database, I am forced to abort. I receive the following error: ORA-01041: internal error. hostdef extension does not exist. Please find bel

  • Aperture - iPhoto (or iLife integration)?

    I remember reading about some scripts Apple was going to release to sync Aperture with iPhoto, which would allow for iLife and iPod integration, as well as many other useful things. I upgraded with Software Update, but I don't see any scripts. Any id

  • Human Task in jDeveloper 11g users list not available

    I have the problem, I defined SQL authenticator in wenlogic, and I want to do assignment at human task. But, human task only see jazn users, alhough I see the users defined in db at weblogic console Caused By: ORABPEL-10509 User not found. User "bpmu