Problem of install Windows 2000 and XP on MS6191 m/b systemThe

I am trying to upgrade operating system for my Tiny computer bought in UK few years ago. The problem is that I just can't get Windows 2000 / XP to install. I get to the stage where the setup files are being installed from the cd and the progress bar gets to a small percentage and then the installation just hangs. I am using standard performance BIOS settings, and the partitions on the HD are NTFS formatted. If anyone can help please!!!

:biggthumbsup:update your bios...and it should fix your problem...otherwise do what elvazur said...so we can better help you mate...cheers

Similar Messages

Problem while loading windows 7 and dual boot

good evening am getting problems while installing windows 7 and fedora,is this laptop HP 15-R262TU supports only windows 8.1 and it is suppoting dual boot or not? please reply soon
This question was solved.
View Solution.

Hi
Here is the link required for all Windows 7 Drivers for your machine , Once you have installed Windows 7 goto the link and download all drivers that are not installed via Device manager . If you make a list of drivers not installed and then refer to the drivers page and take all the drivers you require .
http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7486447/model/7812714#Z7_30...
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Install Acrobat 7 and CS2 applications - running Windows 2000 and IE 6

need to install replacment Acrobat 7 and CS2 applications - running Windows 2000 and IE 6. Any problems with this?

http://web.archive.org/web/20070203090721/http://www.adobe.com/products/creativesuite/syst emreqs.html

Portege 3440 - Can't install Windows 2000

Hello friends :)
I have problem with installation Windows 2000 on Portege 3440.
I was running installation Windows 2000 with FDD USBB (with driver for CD-ROM PCMCIA) and CD-ROM PCMCIA. All was ok to moment when I entered to winnt" on q.
During installation without partition on HDD was appeared information on blue background: "could not find a place for a swap file. With partition (FAT32, 6GB): " Setup was unable to install Windows Boot Loader. Ensure that your C: drive is formatted and that drive is not damaged." I was tried with three other HDDss.
What I must do to install this system? (Same users don't have such communiques)
Thanks for help
Adrian

so your harddisk isn't bootable ...?
Most likely there is a problem with the MBR ( = master boot record )
Do the following :
*Download BootIt NG ( free, use google ) and transfer it to a bootable diskette
*Start up with your FDD, run ( do not install ! ) BootIt NG, delete the MBR, make a newMBR and format your HD to fat32
then :
*start-up with the fdd-DOS-bootdisk and transfer the DOS-system files to the HD with the command : *sys c:*
*remove all peripherals ( the fdd and the pcmcia-cdrom ) and reboot, your PC should boot with the DOS-files
*if so : transfer the i386 dir from the W2K-install-CD to the HD again ( may be done on another PC )
*boot again with the HD, with no external drives connected
*go to the i386 dir and start winnt.exe ;
commands :
*cd i386*
*winnt*
if this method isn't succesfull, I presume there must be a hardware-problem with the HD

Re: IMPORTANT - How to install Windows 2000 on a Satellite L300-16M (PSLB0E) ?

Hello,
I'm an independent developper and absolutely need to install several operating systems on my *Satellite L300-16M (PSLB0E)* : it's very important for me because I've to check working of piece of software under every environment for real (not using solutions like VMware, for example).
Well, so, at this time, I've done an Acronis TrueImage backup of original full HDD, then deleted original WinRE and Data partitions, reduced and moved at beginning of disk the Vista partition... and installed System Commander 8 to prepare my future multi-boot. At this time, all sounds right : Vista works perfectly !
Also, note I've configured SATA in Setup BIOS to be in "Compatibility" mode ; just because I don't need AHCI in my type of use !
Second stage : now, *I have to install Windows 2000 Pro (SP4) FR*. Of course, I'm aware that the blocking point is the SATA/AHCI driver, wich is absent in the Win 2K CD... So, I've just made a new CD integrating these drivers using nLite ; at this time, I've tried using driver from Toshiba's XP Drivers page and Intel site about Intel 82801 HEM/HBM SATA AHCI Controlleur (ICH8M).
But it doesn't work completely : the Win 2K install starts... All drivers are well loaded (including the AHCI ones) and just after this loading step, I get a black screen with just a blink cursor at top left of screen... indefinitively :-(
I've also tried to switch SATA to "AHCI" mode in BIOS and it's the same.
So, what to do next ?
Do I've used the wrong AHCI drivers ? Do I need to incorporate the maximum of Toshiba Drivers (about chipset, display, sound) in the Windows 2000 install CD using nLite ? I mean until the CD capacity is not reached.
Is there a way or tutorial to install Windows 2000 somewhere ? For XP, I think it will more easy because SP3 seems to support AHCI, but, just now, my problem is to install Windows 2000 : even if Microsoft wants to leave-it, there are a lot of professionals who still use-it... And my job, as developer, is to do my software works on this OS too ! *I really need to find a way to install it on this computer !!!*
Awaiting your lighted replies and all tips or idea which could help me to achieve the task.
In one word : HELP ! oops !
Message was edited by: eanon

Thanks xaver, but I've already tried stormng-20070827133046.zip and it remains the same :(
About all driver ? Oh, in fact, I'll try to see if the XP ones work and if not I'll have a not-fully working Win 2K, but it will be enough for me to test my programs... I hope, at least, I'll be able to do display driver work !
Well, seeing I don't succeed using Intel/Toshiba drivers and nLite, I'm trying at this time to go through another way, installing Win2K in a VMware, then forcing install of the Toshiba AHCI driver, then doing a TrueImage of this and restauring in the Toshiba ! I'll see...
However, if someone has an idea, don't hesitate.
EDIT : I'm now at the step to try to force the Store Manager driver from Toshiba (the one given for this model under XP), launching iata_cd.exe and after some second I see a message saying that this OS (Windows 2000) is not supported by this driver... So, from now, I clearly know why this driver failed when I gone through the nLite-customized Win2K CD install directly on the Satellite :-(
So, this change the game : does it exist a Windows 2000 compatible driver for the Satellite L300-16M's AHCI Controller ??? This is the question !
If you have the answer, very thanks to tell me, of course...
Message was edited by: eanon

How do I install Windows 2000 to my iMAc?

I need Excel on my Mac for a program I bought. I insert the disk & it just installs 2 icons on my desktop. What do I do?

You're posting in the PowerPC processor-based iMac Forum, so I'm assuming that your iMac doesn't have an Intel processor. If it is a PowerPC model, you can't install Windows 2000, unless you were doing so in conjunction with an old version of VirtualPC. That (now-discontinued) third-party program enabled a Mac's PowerPC processor to emulate the Windows environment. What model iMac do you have and what OS version is it running? Microsoft has marketed Mac-compatible versions of its "Office" software for years, that include Excel. Office 98 Macintosh Edition is the oldest version that would run on a first-generation G3 iMac, and Office X was the first version designed to run on OS X. If you have an Intel processor-based iMac, you should post in the Intel iMac Forum. I would think you'd have problems trying to install Windows 2000 on an Intel iMac, simply because the drivers for more recent hardware (like the Core 2 Duo processor) would not be present in the CAB files.

Problems with installing Win 2000 on MS6380

Hello,
I have a problem with installing Win 2000 SP 2 on a PC assembled with a MS 6380 (Kt 266 pro) mainboard.
The setup starts but the system blocks just after the boot, when showing the message "Detecting Hardware configuration" .
The configuration is the following:
Athlon TB 800
MS 6380
128 MB DDR
Matrox G200
20 Gb Quantum Fireball CX HDD
Intel Ethernet card 100 pro + S
I tried to update the Bios to the latest version (1.90) and set the most conservative settings on the RAM timings. I have disabled ACPI, too.
Could someone please help me with solving this problem?
Thanks

You have format the BootCamp partition during the Windows installation, since OSX can only do a preformat using FAT32 (MS-DOS) and Windows 7 needs NTFS as file system.
See page 7 of the BootCamp Installation Guidehttp://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
Stefan

A lot of problems after installing Windows XP using Boot Camp on a Mac Book

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
~Twilight

---I'm moving this topic to the Boot Camp forums.
-Twilight

HT1338 Can I install Windows 2000 onto my macbook pro

Can I install Windows 2000 or newer on my Macbook Pro. OS x 10.8.5??

Boot Camp supports Windows 7 and 8. There are no hardware drivers for older versions.

Can i install windows 7 and OS X together on the same Mac Book Pro?

can i install windows 7 and OS X together on the same Mac Book Pro?

You can do it either using Boot Camp or by running a virtual machine, such as Parallels Desktop (which I use) or VMFusion. I prefer the VM method, as I don't have to reboot using the handful of Windows applications that I use. And I can access my Windows apps just as I do my Mac apps - copy and paste between them, etc.
I just upgraded from Parallels 7 to 8 and I'm quite happy with it, running Mountain Lion on a late 2011 MBP with 16GB of RAM and a 512GB SSD. I also have a 27" Apple Thunderbolt Display and there are no problems with video drivers, etc.
If I were you - unless I needed every inch of performance that running Boot Camp can bring - I'd go with a VM to run Windows. I can attest to the functionality of Parallels - perhaps others with experience with other VMs will chime in.
Clinton

How to install Windows 2000 Server in x61

I got a new x61 model:7673-B93, and need to install Windows 2000 server in it,
but failed.
Can anyone tell me if I can do this?
Thanks

Manson-Tsui wrote:
I've tried installing Win Server 2003, the system prompting it can't find any drive.
SATA must be set to compatibility mode before any version of 2003 will see a SATA HDD, including 2003 R2 x86/x64 SP1/SP2. i've installed 2003 EE x86 R2 SP1 on my X61 before and can confirm that 2003 can see the drive in compatibility mode.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

How to install windows 2000 on my g560 ?

How to install windows 2000 on my g560 laptop?
I am able to install winxp and upwards only.is there a way through bios setting or anything and secondly can u use winxp drivers for win2000?
thanks everyone here for your time
u can email me too: *****
Moderator note: member's email address removed to keep away from the spambots.

Windows 2000 has been largely abandoned (and with VERY GOOD reason) why on earth would you want to install that outdated unstable OS? It's plagued with security issues bugs and BSOD issues from being unsupported so long (even when it WAS supported) chances are no drivers were made compatable with that OS for your machine as XP is a totally different monster you likely would not find drivers for 70+% of your hardware. I'd 110% advise against even trying it XP is the oldest supported windows OS anymore an even it is about to lose support very VERY soon (if it hasn't yet already). I can't stress enough how much of a bad idea (and without any advantages by doing so) it would be to even attempt this.
Lenovo 15.6,B575 W7 E-450,ATI6320,320GB,8GB DDR3 Ram-*Midnight*
Dell Latitude D430,12.1 C2D 1.3 ULV,2GB DDR2,80gb SSD,Intel 950,XP *Mini Me*
Dell Latitude D630,14.1,C2D2.0,W7,500GB,8GB DDR2,X3100*Old Faithful*
Nvidia I shall Never forgive you for the 8000m Series.

Trying to install windows 7 and getting error message windows must be installed to a partition formatted as NTFS

Trying to install windows 7 and getting error message Windows must be installed to a partition formatted as NTFS

Welcome to Apple Support Communities
Boot Camp Assistant creates a Windows partition in FAT32 to make the Windows XP installation easier.
The problem is that Windows Vista, 7 and 8 require a NTFS partition, so the Windows installer gives this error. The only thing you have to do is to choose the BOOTCAMP partition in the installer and go to “Drive options (advanced)” > Format. Finally, install it

Why will a stand alone executalbe with an installer work on windows 2000 and crashes on windows xp professional?

When I run the setup.exe file on a Windows 2000 system it installs properly, but the same file run on a XP Professional system I get an error stating Fatal Error: Installation ended prematurely because of an error.
See here for more information on the specific installer I'm trying to use.
In fact I get this error for any stand alone executable I try to install on any XP machines. I am using LV 7.1. Is there a way to manually install eve
rything?
Thanks

Sure you can Install a lv application manually. just copy the exe-file,
support files in a folder. For the runtimeengine just copy the file
lvrte.dll in the folder of your application or in the windows system folder.
Hope that helps, Niko
BB Herman wrote:
> Why will a stand alone executalbe with an installer work on windows
> 2000 and crashes on windows xp professional?
>
> When I run the setup.exe file on a Windows 2000 system it installs
> properly, but the same file run on a XP Professional system I get an
> error stating Fatal Error: Installation ended prematurely because of
> an error.
>
> See
> HREF="http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000...
for more information on the specific installer I'm trying to
> use.
>
> In fact I get this error for any stand alone executable I try to
> install on any XP machines. I am using LV 7.1. Is there a way to
> manually install everything?
>
> Thanks

Unable to buildclient and to buildserver on windows 2000 and Tuxedo 8

Hi,
I am still trying to make the simpapp sample run on my laptop (windows 2000) and
I still don't manage to do so.
Currently, I am trying to compile with the tuxedo tools (buildclient and buildserver)
and this doesn't work at all.
It seems that a library is missing.
buildserver -o simpserv -f simpserv.c -s TOUPPER
cl /MD -I"%TUXDIR%"\include -Fesimpserv BS-388.c simpserv.c
"%TUXDIR%"\lib\libtux.lib "%TUXDIR%"\lib\libbuft.lib
"%TUXDIR%"\lib\libfml.lib "%TUXDIR%"\lib\libfml32.lib
"%TUXDIR%"\lib\libengine.lib wsock32.lib kernel32.lib advapi32.lib
user32.lib gdi32.lib comdlg32.lib winspool.lib -link -implib:BS-388.lib
CMDTUX_CAT:4180: ERROR: can't execute cl /MD
-I"%TUXDIR%"\include -Fesimpserv
BS-388.c simpserv.c
"%TUXDIR%"\lib\libtux.lib
"%TUXDIR%"\lib\libbuft.lib
"%TUXDIR%"\lib\libfml.lib
"%TUXDIR%"\lib\libfml32.lib
"%TUXDIR%"\lib\libengine.lib
wsock32.lib kernel32.lib advapi32.lib user32.lib gdi32.lib comdlg32.lib
winspool.lib
-link -implib:BS-388.lib
What is this 'cl' command which is alwasys called in the buildserver and buildclient
Thanx in advance for your help.
Best Regards
Jean-Guillaume LALANNE

never mind...
Posts from other threads in this group suggested using VC++'s vcvars.bat for setup.
That solves the stdio problem, buildclient now works for me.
"Rod" <[email protected]> wrote:
>
Same platform, also unable to buildclient. I put VC++ bin and Common/MSDev98/Bin
(to eliminate a complaint about MSPDB60.dll)in my path, but buildclient
replies with:
simpcl.c(13) : fatal error C1083: Cannot open include file: 'stdio.h': No
such file
or directory
I tried setting CFLAGS="-Ic:\Program Files\Microsoft Visual Studio\...",
and discovered
that buildclient apparently can't handle directory names with spaces. Different
variations of quoting, with single and double quotes in various positions,
evenutally
got rid of the
Command line warning D4024 : unrecognized source file type 'Files\Microsoft',
object
file assumed
warnings, but it still can't find stdio.h:
TUXNT_CAT:77: ERROR: Can't execute cl /MD -I"c:\Program Files\Microsoft
Visual Studio\VC89\Include"
-I"%TUXDIR%"\include -Fesimpcl simpcl.c "%TUXDIR%"\lib\libtux.lib "%TUXDIR%"\lib\libbuft.lib
"%TUXDIR%"\lib\libfml.lib "%TUXDIR%"\lib\libfml32.lib "%TUXDIR%"\lib\libengine.lib
wsock32.lib kernel32.lib advapi32.lib
user32.lib gdi32.lib comdlg32.lib winspool.lib -link -implib:BC-75c.lib
I was able to compile the client from inside VC++ and make an executable,
but the
server executable needs an atmi main.
So, I'm still stuck without an stdio.h....
Scott Orshan <[email protected]> wrote:
That's the C compiler (Microsoft Visual C++). To develop applications,
you need a compiler. Make sure that it is in your PATH.
jeangui wrote:
Hi,
I am still trying to make the simpapp sample run on my laptop (windows2000) and
I still don't manage to do so.
Currently, I am trying to compile with the tuxedo tools (buildclient
and
buildserver)
and this doesn't work at all.
It seems that a library is missing.
buildserver -o simpserv -f simpserv.c -s TOUPPER
cl /MD -I"%TUXDIR%"\include -Fesimpserv BS-388.c simpserv.c
"%TUXDIR%"\lib\libtux.lib "%TUXDIR%"\lib\libbuft.lib
"%TUXDIR%"\lib\libfml.lib "%TUXDIR%"\lib\libfml32.lib
"%TUXDIR%"\lib\libengine.lib wsock32.lib kernel32.lib advapi32.lib
user32.lib gdi32.lib comdlg32.lib winspool.lib -link -implib:BS-388.lib
CMDTUX_CAT:4180: ERROR: can't execute cl /MD
-I"%TUXDIR%"\include -Fesimpserv
BS-388.c simpserv.c
"%TUXDIR%"\lib\libtux.lib
"%TUXDIR%"\lib\libbuft.lib
"%TUXDIR%"\lib\libfml.lib
"%TUXDIR%"\lib\libfml32.lib
"%TUXDIR%"\lib\libengine.lib
wsock32.lib kernel32.lib advapi32.lib user32.lib gdi32.lib comdlg32.lib
winspool.lib
-link -implib:BS-388.lib
What is this 'cl' command which is alwasys called in the buildserver
and
buildclient
Thanx in advance for your help.
Best Regards
Jean-Guillaume LALANNE

Problem of install Windows 2000 and XP on MS6191 m/b systemThe

Similar Messages

Maybe you are looking for