Problem porting CS5.5 to CS6

Hello
I run into a problem when I try to port a CS5.5 plugin to CS6. I get the following error message:
>C:\Program Files\MSBuild\Microsoft.Cpp\v4.0\Microsoft.CppCommon.targets(108,5): error MSB3073: The command "merge_res.cmd "..\objR\ColormanLite\"  ColormanLite  & echo Deleting old resources... & del /f /s "C:\Users\Laidback\Documents\Adobe InDesign CS6 Plugin SDK\build\win\objR\ColormanLite\(ColormanLite Resources)\"*.idrc > ..\objR\ColormanLite\prevDeletedResources.txt & xcopy /Q /E "..\objR\ColormanLite\"*.idrc "C:\Users\Laidback\Documents\Adobe InDesign CS6 Plugin SDK\build\win\objR\ColormanLite\(ColormanLite Resources)\" /Y
1>C:\Program Files\MSBuild\Microsoft.Cpp\v4.0\Microsoft.CppCommon.targets(108,5): error MSB3073: :VCEnd" exited with code 4.
Does anyone know how to fix this problem.
Best regards
/ Pontus

Solved the problem:
In the compiler settings under:
General ->Output Directory set: ..\release\SDK\
General ->Intermediate Directory set: .\..\objR\<projectname>\
Compaire with the compiler settings for the samples.
Best regards
/ Pontus

Similar Messages

  • Performance Problems PrPro CS5 - Upgrade to CS6?

    Hi
    we often notice massive performance problems with PrPro CS5 here.
    e.g. last week we were shooting with a Sony NEX-VG10. (MediaInfo:)
    Format: AVC
    Format profile: [email protected]
    Format settings, CABAC: Yes
    Format settings, ReFrames: 2 frames
    Format settings, GOP: M=2, N=13
    Bit rate: 16.0 Mbps
    Width: 1 920 pixels
    Height: 1 080 pixels
    Display aspect ratio: 16:9
    Frame rate: 25 fps
    After linking footage into PrPro plaback stutters.
    PrPro is very often not responsive to the keyboard at all.
    Sometimes PrPro needs some seconds before playback starts.
    This way editing is a pain...
    No fx in timeline, only one or two clips. Same behaviour if I play a clip in the source window.
    Project and sequence settings are correct. Playback quality set to 1/4.
    These problems occure in several projects with footage from different cameras.
    PrPro works ok  with this (PAL/SD-)footage for example - MediaInfo:
    Format: DV
    Commercial name: DVCPRO
    Width: 720 pixels
    Height: 576 pixels
    Display aspect ratio: 16:9
    About the computer:
    Dell Precision WorkStation T5500
    24 GB RAM
    2 processors w/ 8 cores together: Intel Xeon CPU E5620 @ 2.40GHz
    System: 250 GB (SSD)
    Media: 2 TB (this is one normal internal hard drive, no raid)
    NVIDIA Quadro 4000 (driver version 297.03)
    connected to internet (is a must in this company)
    connected to intranet, server (is a must in this company, too)
    optimized for performance
    windows firewall active
    AVIRA Porfessional
    What would  PrPro force to work with HD footage?
    Add an RAID? internal/external?
    Upgrade to CS6?
    Edncode footage to another codec before linking it into PrPro? (which codec? encode with AME?)
    Buy a new processor? (i7? which one?)
    Buy any Hardware pieces?
    TIA for your guidiance and best regards.

    Take a look at the Dell T7400 currently at rank # 568, 'Base2008PT1' on Benchmark Results. It is somewhat similar to your own system, but has more memory, a better video card and some raid0 arrays. Nevertheless, it is around 3.4 times slower than a fast system. My guess is that your system is even slower.
    The material you try to edit is very demanding and requires a beefy computer. Even though there is nothing wrong with the dual Xeon E5620's, their clock speed works against you (I have the same CPU's in a file server, but that is far less demanding than editing), as does the amount of memory in the system. You can be helped with more disks, but don't expect miraculous performance improvements. But all little things help.
    The alternative is a complete new system, but that can be pricey. Even if you build it yourself, see Planning & Building a NLE system it can be costly. It gives you very fast performance as demonstrated on the Reflections page and you should not get such a system from Dell or HP, unless you have unlimited funds.

  • Can't open CS5.5 in CS6

    I got a couple of CS5.5-INDD from a partner. Some of them I can open, some I can't. InDesign CS6 freezes and must be closed. I can reproduce this problem on a Windows 7 64-Bit and a Mac OS X Lion Computers with both InDesign CS6 Creative Cloud.
    I asked another colleaugue to open the files in CS5.5 to save them as IDML. She can open the files without problems and create IDMLs. When she sent me those IDML though, I get the same problem as when opening the INDD: InDesign freezes.
    I tried several things to get the files (CS5.5 IDML or INDD) opened:
    * Reset the preset file
    * Deactivate plugins
    * Restart the machines
    Both installations of CS6 are new and up to date. Is there anyone else having a similar problem with CS5.5 to CS6 incompatibility or any ideas on the topic?
    Thanks in advance,
    Richard

    Here is a Sampling
    http://dl.dropbox.com/u/2886775/Analyse%20von%20%E2%80%9EInDesign%E2%8 0%9C.txt
    But we can't get a crash report. Is there any other way then the described one? I can post lines from amt3.log if it helps.
    That's odd. What happens when you Send Signal: Abort? Nothing? Does the app close with no crash report? Is this 10.7.3?
    amt3.log isn't going to help, it's about licensing.
    Did you try using a different user account? Easy to do and solves some problems, sometimes.
    With repsect to the sample report, yes, Peter is correct, it appears that ID is invoking the paragraph composer. But that's not really a complete sample report, it's only 24 samples. Did you run Sample from Activity Monitor, or did you just let OSX generate it on its own from the Force Quit dialog?
    Still, if there are footnote irregularities, that might be a place to start looking.
    Do you have references to another InDesign document in your documents, such as documents placed inside other documents, or cross-references?
    You could try installing the CS5.5 free trial and see if that replicates the problem...

  • Problems installation Cs5 and Cs6

    My OS is windows 7
    I had  Adobe cs5.5 installed, try upgrading to Cs6 trial but got error.
    Then try to reinstall Cs5.5 but now I can`t do it, it always stops in "Adobe Help installing"
    WARNING: DS013: Payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 is already installed and the session payload {7EABC54B-02C3-4DA1-9EB4-974CE7414066} AdobeHelp 3.4.0.0 has no upgrade/conflict relationship with it.
    The only thing I can install is Photoshop Cs6.

    I already did, not work, Cs5.5 and Cs6 always stop  in: "Installing adobe help..." 

  • CS5 file hanging CS6 when modifying styles

    Windows 7, InDesign CS6 8.01
    I was working on a file of about 91 pages with a lot of tables in CS5 last week. We just got updated to CS6 this week, and the file seemed to be working fine. I decided I wasn't happy with the look of the tables, so I went in to the table style, changed the colour of the row fills, and as soon as I clicked on "Preview" I got the spinning blue circle. Only way out was to end program.
    Since then I have tried the following:
    * Change colour without previewing (hangs)
    * Re-import CS5 document into CS6, try again (hangs)
    * Open file in CS5 on another computer (as it was uninstalled on mine) and try the same thing (fine)
    * Export it out to IDML from CS5, and import that into CS6 (fine). Try changing style (hangs)
    * Try changing the colour of a font in a paragraph style (hangs)
    * Try changing the font of a paragraph style (fine)
    * Open the CS6 document that was casuing all the trouble on another machine with CS6 (doesn't display, then hangs)
    * Open the CS5 IDML on the other computer (fine) then try the table style change (hangs)
    * On the original computer, re-import the table styles from a previous version (fine) then attempt change (hangs)
    * Duplicate the table style, change the colour in the style (fine, but not applied to anything), then delete original style, replacing with new one (hangs)
    I'm at a loss here, as my usual solution to weirdness is to go the IDML route as I thought that re-built the file anew. Doesn't seem to want to play along though.
    Any suggestions?

    Thanks for your reply Peter. I hadn't thought about the tagged text route, probably because I've never had a use for tagged text!
    I gave it a go, exporting the whole of the troublesome section as tagged text. Placing it back in to a new InDesign document with automatic text flow on, I got the same crash/spinny-wheel-causing-me-to-end-task. I tried it again, but this time turned off autoflow and did it page by page, noting the point that it would crash. Next time, I cut out the table that the crash would occur on when I got to it (the crash would happen as soon as I clicked the out port), pasted it on the side, made a note of where it went and continued to place the rest of the story without a hitch. I could change the table style in this document no problem.
    I pasted the troublesome table back in, tried to change the table style and got the crash. Right, getting somewhere.
    I opened up the previous template, and put back in the section that wasn't causing the problems (everything without the dodgy table). I could change the style fine. I then made a new document, and pasted only the bad table, figuring that it would crash when I went to change the style. However, I could change the table style just fine!
    So, figuring that it was all ok now, I copied the table, pasted it in with everything else, went to modify the style and... spinny ball.
    Finally, I converted the table to text, pasted it into the main document, and converted it back to a table. So far, so good. I'll update again if I run into any more problems.
    Realistically I could have set the thing again in the time it's taken me to troubleshoot this, but I'm a little scared that this happened at all with a document that works just fine in CS5!

  • Has anyone tested Premiere Pro CS5, CS5.5, or CS6 in Windows 8?

    Hi all.  I was curious if anyone has tested Premiere Pro CS5, CS5.5, or CS6 in Windows 8 RTM (MSDN)?  Does CS5 install and run without problem?  I am planning on getting a new system, but don't know if order it with 7 or 8.  Thanks for any input on the matter.

    I have been running on Windows 8 and 8.1 the CS6 suite for a while also. And by the way, capture via firewire does work. Legacy drivers are unnecessary with Windows 8 or 8.1. I have captured from VHS tapes, etc. using the IEEE 1394 port.

  • Ps CS5 e Ps CS6 in Mavericks: (Two monitor)

    Hello. Sorry for my bad English!!!
    This is my great problem: After installation of Maverick on my MacPro Early 2008, when i launch Photoshop (CS5 or CS6 version) in my secondary monitor don't appear the palette of the struments by my works, but is only on surface by primary monitor!!! ...and my image is on the deep. It's impossible to work on this mode!!!
    If i register the "Works Area" after reimposted palette of the tools ( Level, History, Color...ecc.ecc.) when i restart Photoshop ...the windows by second monitor is on the primary monitor!!!!
    What's appened???
    Tanckyou to all!!!
    Alfredo Manicardi - [email protected] - www.scattinaturali.com

    Tank
    Messaggio originale----
    Da: [email protected]
    Data: 14-nov-2013 0.24
    A: "Alfredo Manicardi"<[email protected]>
    Ogg: Ps CS5 e Ps CS6 in Mavericks: (Two monitor)
        Re: Ps CS5 e Ps CS6 in Mavericks: (Two monitor)
        created by bwl2010 in Photoshop General Discussion - View the full discussion
    I had the same problem and it was driving me nuts.  Thanks to conradchavez.com Blog.
    Multiple displays: If you put panels (including the Tools panel) on a secondary display and then switch applications, those panels may snap back to the primary display when you switch back. To avoid this, open System Preferences, click Mission Control, and turn off Displays Have Separate Spaces. Mavericks ships with that option on, so if you want to position Adobe application panels and windows on multiple displays you should turn off that option.
    You will have to log out before it works.  It worked for me.
    Tankyou very mutch!!!!
    Now is all perfectly funzionally!!!!
    Ri- Tankyou!!!
    Alfredo Manicardi
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5840183#5840183
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5840183#5840183
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5840183#5840183. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Photoshop General Discussion at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • InDesign CS5.5 and CS6 Hang while opening document

    hello,
    I have the following problem:
    Indesign CS5.5 CS6 and hang up several times a day when opening documents on. the user can not make more in the program and must kill the process. After reopening the document opens without problems (probably the recovery file). I have tried all known solutions (delete Preferences, user with admin privileges, delete caches, safe boot, ...)
    here a hang report, which meanwhile has been created.
    InDesign CS6 hang report - Pastebin.com
    Can anyone see something in it and help me?

    Try SING removal :- http://helpx.adobe.com/indesign/kb/hang-freeze-open-create-file.html

  • Copy and paste from CS5.5 to CS6 help

    I work at a newspaper and we recently upgraded from CS5.5 to CS6.
    When I open my CS5.5 documents to copy and paste type it shows up like a graphic in CS6.
    If I make a text box and paste the type into it, it is unformatted.
    If I copy and paste an image from CS5.5 and paste it into my CS6 InDesign document it appears, but not as a linked file.
    Why would this be different now with CS6? It is really a hinderance considering we use parts of ads over and over again in the newspaper industry.
    Thank you for the help.

    Hi there.
    I haven't upgraded to CS6 yet, but I'm having this very problem with InDesign CS5.5. If I copy and paste the box in InDesign - vector or text - it pastes as an image. If I copy/cut selected text with text tool - even if it's copying and pasting in the SAME text box - it pastes unformatted. This happens across all documents, but most irritatingly when working in the same InDesign document.
    Checked all preferences in InDesign and even cross referenced it with another Mac with the same version, but every setting was the same. Adobe won't help unless it's CS6 annoyingly, well they will if I pay!
    Other than removing and reinstalling the whole package, I can't think of what else to do!

  • Best way to transfer settings from CS5.5 to CS6

    I am trying out CS 6 Creative Cloud and want to copy my settings from CS5.5. Is there any easier way to do this than re-creating them through the UI? It would take such a long time to re-enter my preferences, shortcut keys, search queries, window layouts, &c, manually that the trial period would be over before I finish!

    Look at Replace Your Preferences for a list of things you should be able to back up and transfer easily. The only thing that might casue a problem that I can think of is custom shortcut sets, but I think CS5.5 and CS6 are similar enough that they won't casue abberant behavior (the same was not true going from CS4 into CS5).

  • CS Design & Web Premium Upgrade from CS5.5 to CS6 on DVD

    I would like to order a CS Design & Web Premium Upgrade from CS5.5 to CS6 (int. english, MAC) in the Adobe Shop.
    I have a really low internet connection and can not download 4+GB, it does not work. Even files over 20MB are pure horror.
    So why I can not order a DVD, I don't understand what's the problem to sell a DVD to customers?
    Regards,
    Bodo

    Is it one file which I can do on an USB stick, and that file is ready for install?
    Can I also burn it to DVD, or the file is too big to burn to DVD?

  • If I upgrade from CS5.5 to CS6 will I have to pay again for upgrading to CSCC?

    If I upgrade from CS5.5 to CS6 will I have to pay again for upgrading to CSCC?
    I have CS5.5 and my current clients have CS6.
    If I upgrade to CSCC will I have any trouble saving back my files to CS6? Are there any know issues that occur when saving back to CS6 or earlier?

    Why would you update to CS6 when you can go directly to CC.  And while you wouldn't pay another upgrade amount you would have to pay the monthly subscription whether you upgrade to CS6 or not.
    And you shouldn't have problems saving your files in a form that is readable by CS6.  You wouldn't be able to make further adjustments on items that are not in CS6 ie. Shake reduction, however the adjustments you make in CC will be visible.

  • AE CS5.5 vs CS6 in encoding AC3

    i have videofile from camera SONY (.MTS format:BDAV v:AVC a:ac3)
    CS5.5 importing everything ok, but in CS6 there is no audio stream.
    is there any problem with decoding AC3 in CS6 or am I missing something?

    What version is your CS6? If it's 11.0.0 or 11.0.1, you're missing some critical bug fix updates.

  • Re: Can't open CS5.5 in CS6 (branched)

    (Branched this thread from Can't open CS5.5 in CS6)
    I have the same problem. I've been working with CS5.5 for 1 year. Know, I've upgrade to CS6 and I can't open my CS5.5 files.
    This files are mine (not of a partner), I've made it so I can't understand whats wrong. I can open some CS5.5 files.
    I think it's an Adobe problem.
    I'm gonna try to see what kind of fonts have my documents.

    It's very difficult to get useful error reports under Windows.
    Your report seems to suggest something to do with hyperlinks:
    Sig[3].Name=Nombre del módulo con erroresSig[3].Value=HYPERLINKS.RPLN
    But it is hard to say.
    If I try to uninstall and use the CS Cleaner tool?
    Go ahead. It will not hurt. I do not know if it will help. But it will do no harm.
    Can you export your CS5.5 file to IDML in CS5, and then open the IDML in CS6?
    Can you try to narrow the problem? You can try working on a copy of the file in CS5.5 and deleting/removing parts until you can determine what causes the crash in CS6. You mention hyperlinks and cross-references, so they may be a place to start.
    Can you share a file with us?

  • I own CS4, upgraded to CS5, then joined CS6, CC... and now I installed CC14. Which will be the best way to delete or uninstall the programs I don't need keeping only CC14 without running into issues? I have an Alienware Area 51 PC running Windows 7.

    I own CS4, upgraded to CS5, then joined CS6, CC... and now I installed CC14. Which will be the best way to delete or uninstall the programs I don't need keeping only CC14 without running into issues? I have an Alienware Area 51 PC running Windows 7.

    Which will be the best way to delete or uninstall the programs I don't need keeping only CC14 without running into issues?
    There is none. Whatever you do to get rid of the older versions will inevitably do damage to shared components and other stuff of the new versions as well. That's just how it is with this approach... Uninstall the older versions, run the cleaner tool then reinstall CC 2014.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Mylenium

Maybe you are looking for