Problem - SCSM Change status workflow does not work, shows huge "minutes behind" in SQL, but do not appear as failed.

There is a workflow "Change request status changed" which periodically fails to run, and it does not show up in "All instances" tab. For instance when I cancel a CR, all activities remain as-is in their respective statuses.
SQL - "SubscriptionStatus" from
http://blogs.technet.com/b/servicemanager/archive/2013/01/14/troubleshooting-workflow-performance-and-delays.aspx
shows increasing number of "minutes by" each minute for this particular workflow.
Restarting "Management service" does not give enything. As well as "UpdateSubscriptionWatermark" SQL from the link above (except resetting the "minutes behind" counter)
Please help!
Egils Zonde from Technet

Take it to an apple store and see if you can get an out of warranty replacement. It won't be free, I think the fee for an Air replacement is $299, but it sounds like the insides are broken.

Similar Messages

HT201272 I need to reload some songs as the backup did not include all. Following this article. Problem is that download icon does not appear anywhere. Using iTunes 11.01. Anybody seen this before?

I need to reload some songs as the backup did not include all. Following this article. Problem is that download icon does not appear anywhere. Using iTunes 11.01. Anybody seen this before?

Steve!
There is a lot more "meat" in this .
I purchased all out of Denmark. My HD crashed and I reload it all. While doing this I had to install new iTunes, - this is the newest version 10.xx. The old version was probbaly 9.xx (cant remember). So the library files are from an old version, - but it does not look like creating a problem. I am now in Sweden, so iTunes was installed in Sweden, and I try to re-download my missing songs while being here in Sweden. However, - I belive I am connected to iTunes store in Denmark. ... (it takes 2 smileys for this, - if you get as far as to here and still have an overview.)

Weblogic 7.0 SP1 JDBC Multipooling does not appear to fail over consistantly

We are running Weblogic Platform 7.0 SP1 on a Sun with Solaris 8 O/S
We have a connection multipool set up associated with a Data Source.
The multipool has two connection pools, each pointing to a seperate but
Identical database. The multipool is created with the high availability algorithm
set.
both connection pools have the following settings:
(Connections Tab) (Testing Tab)
Initial Capacity:0 Test Table Name: dual
Maximum Capacity: 20 Test Reserved Connections: Checked
Capacity Increment: 2
Login Delay Seconds: 2
Refresh Period: 15
Allow Shrinking: Checked
Shrink Period: 15
When the first database goes down for a backup, We can see the exceptions thrown
from the
broken acitve connections, which would be expected. But we also notice a significant
response time increase (3-7 seconds) and we notice continuing exceptions from
what appears to be the application EJB still attempting to connect to the first
instance. It is only when a DISABLE_POOL is issued using the command line interface
to disable the first pool in the multipool that the response time drops to normal
and the exceptions stop. The exceptions don't happen for every query, but we cannot
understand why the test-on-reserve doesn't seem to always work.
Any help would be appreciated

This is known behavior of the "high availability" algorithm for multipools.
Whenever a multipool is asked for a connection, it will always try the first pool first
(unless it has been diabled). The algorithm doesn't remember that it had trouble with
the first pool and start with the second pool (e.g., put the first pool at the end of the circular list
of pools to be tried). This is the way it was designed (in my opinion, this defies the
principal of least astonishment, but not everyone agrees with me).
We are planning to add a new algorithm in the next release that does keep state.
The way it currently works, it depends on how long it takes to figure out that
the first pool is not available. This depends on the database client driver and
the network connection (it could take from 100ms to multiple seconds to minutes
to figure it out).
"Joe Doyle" <[email protected]> wrote in message news:[email protected]...
>
We are running Weblogic Platform 7.0 SP1 on a Sun with Solaris 8 O/S
We have a connection multipool set up associated with a Data Source.
The multipool has two connection pools, each pointing to a seperate but
Identical database. The multipool is created with the high availability algorithm
set.
both connection pools have the following settings:
(Connections Tab) (Testing Tab)
Initial Capacity:0 Test Table Name: dual
Maximum Capacity: 20 Test Reserved Connections: Checked
Capacity Increment: 2
Login Delay Seconds: 2
Refresh Period: 15
Allow Shrinking: Checked
Shrink Period: 15
When the first database goes down for a backup, We can see the exceptions thrown
from the
broken acitve connections, which would be expected. But we also notice a significant
response time increase (3-7 seconds) and we notice continuing exceptions from
what appears to be the application EJB still attempting to connect to the first
instance. It is only when a DISABLE_POOL is issued using the command line interface
to disable the first pool in the multipool that the response time drops to normal
and the exceptions stop. The exceptions don't happen for every query, but we cannot
understand why the test-on-reserve doesn't seem to always work.
Any help would be appreciated

Termination does not appear as fail sequence

Hi,
I have I a subsequence than include some Action type step. The step set a local variable. Based on that variable I decide whether to continue or to terminate.
In the event of termination, the process is indeed terminated, but when I look at the report generated by TestStand, the subsequence have a Pass mark.
Is this normal? I would have expected to see Fail or Termination.... How do I fixe this problem to show a fail sequence?
Thanks
Rafi

Hi, Ray
Thanks for your tests. I have also tried with PostAction now. But the result is still the same.
How have you done this ?
By the way as Dug said in TS 4.0.1 it is fixed.
What do you think about updating to the newest version ?
I am concernd when i received a letter from NI about latest DAQmx problem
(infocode rda4a4) and this affects TS 4.0.1 and CVI 8.5
Greetings
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
Attachments:
test2.seq ‏7 KB

Convert PDF Chrome extension does not appear/install for Acrobat 10 Pro

I have Acrobat 10 Pro and the Chrome extension to convert web pages to PDF does not appear in Chrome. I tried repair installation from the Help menu in Acrobat and it still did not resolve this problem. The extension also does not appear on the extension list, in case you're wondering if it's deactivated. I am using Chrome Version 36.0.1985.143 m.
I would appreciate the links and steps I need to take in order to get the Adobe Convert to Webpage Chrome extension to be visible and functional on my Chrome toolbar and in my extensions list. The PDFMaker shows up in Internet Explorer. I do not use Firefox.
I have already tried disabling all of my other Chrome extensions and run a repair of Acrobat via Actions.
I tried uninstalling Google Chrome, restarted my computer, downloaded the latest Chrome installer, installed Chrome, and launched Acrobat and repair Acrobat.
I'm totally at a loss at this point.
Can you please help?
Thank you for your kind assistance!

Hi angelczech,
The convert pdf extension will not appear in Chrome with Acrobat 10.
It will with Acrobat 11.
Regards,
Rave

CHARM Tab does not appears -- solution manager

Hi Experts,
I want to configured CHARM but in tx SOLAR_PROJECT_ADMIN in System Landscape -- Change Request Tab does not appear
Also tx solar01 is locked! the project doc for example . But in scope a have not checked the link.
Any clue?

Hello,
In SOLAR_PROJECT_ADMIN are you creating a project or runing an analysis?
The Analysis screen is not tabbed, it is a tree.
Change request management apears under Solution.
When you create a project, there is not a Change Management Tab.
So are you refering to creating the project or performing the Analysis?
Regards,
Paul

Brand new 27" iMac scroll bar does not appear

Scroll bar does not appear in almost any window. To make it appear, one way I make it appear is to grab the lower right hand corner and move the window size a little bit. The scroll bar appears. But when I try to then grab the scroll bar, I must stay INSIDE the window as I move my cursor toward the scroll bar.
Sometimes swiping down on the cursor to move the page down, the scroll br will appear.
But there is a basic problem. The scroll bar does not appear without EXTRA moves of some kind to make it appear.
By the way, the scroll bar in the window I am in RIGHT NOW is appearing without EXTRA moves.
An Apple Tech wen through this with me on the phone and could not resolve the problem
This is the FIRST problem I have had in TWENTY NINE YEARS that Apple Techs could not solve for me.
Help anyone?
Phil Russell

Here you go.

Approval Workflow does not update the Content Approval status if started automatically

Hi,
I’m using a simple Approval Workflow associated with
Content Approval on site pages. It works fine when I set it to be started manually (by using
Allow this workflow to be manually started by an authenticated user with Edit Item permissions
option) and on the completion of the workflow the
Content Approval status is updated accordingly. But when I set it to be started automatically (by using
Start this workflow when a new item is created
/ Start this workflow when an item is changed
options), it does not updates the Content Approval status. Note that I’ve set the
Update the approval status after the workflow is completed (use this workflow to control content approval)
option to true.
Regards

Hello,
It is recommended to select "Start this workflow to approve publishing a major version of an item" when you want to use the workflow to manage content approval for
a library.
According to the Notes for “Enable Content Approval” option in
this reference:
If you are using this Approval workflow to manage content approval (moderation) for a library, and you selected the Start this workflow to approve publishing a major version
of an item check box on the Add a Workflow page..
If you did not select the Start this workflow to approve publishing a major version of an item check box on the Add a Workflow page because you do not want this workflow to
be the default content approval workflow for a library, you can select the Update the approval status (use this workflow to control content approval) check box to make this workflow a secondary content approval workflow that specific users can
start manually.
That means having an approval workflow start automatically when a document is changed or created is not a good practice when you want to use the workflow to manage
content approval for a library. You should either select "Start this workflow to approve publishing a major version of an item" or give users the option to start the workflow manually at the time they want to submit for an approval.
Thanks & Regards.
Lily Wu

Automatic approval workflow does not work anymore

Hi,
Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
After changing the BUS objects 'automatic approval' workflow into the 1-step manager approval workflow it does work.
- The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
- We applied a new SP (SP07) not that long ago.
- These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
Any input is very much appreciated.
Kind regards,
Tim

Hi Balaji,
In SRM 7.0,
Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
- The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
- - These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
Any input is very much appreciated.
Regards,
Shears

Multiple scheduled workflows does not work correctly

Hi All,
I hava made a simple workflow who executes a powershell script with the latest SMLETS, this workflows is triggered when a new incident is created and after the script change the status of the related computer that is affected by the incident.
When I do this just for one computer it works very fine, but when I create by example 4 incidents for several computers the workflows does not change the status of the comptuers.
For the moment I create a incident and I wait the workflows is finished and i continue to create the next incident it is ok. But I cannot to put this in production environment where several analyst create incient for several devices.
Any Idea?
Thank you
MIKE

Hi,
Ben was right when asked you to share the PS code.
It seems that it works for one instance and doesn't work for multiple ones. It's a regular case when you get objects using search request. Share the PowerShell code and receive the prompt within minutes.
Cheers,
Marat
Site: www.scutils.com Twitter:
LinkedIn:
Facebook:

My ipod works in itunes but does not appear in "my computer" after I changed the properties

My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.

Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support

I bought my iphone 4 through ebay and its unlocked. the problem is that my phone does not sync straight away. I sync my music file through autofill. I want to sync ringtones but its not working

i bought my iphone 4 through ebay and its unlocked. the problem is that my phone does not sync straight away. I sync my music file through autofill. I want to sync ringtones but its not working.
I saw cidya aap so i m not sure if it was jailbroken or not before but it is back to normal settings.
My problem started when I tried to sync my music files. I pressed 'sync' all it says is waiting for sync start, preparing to sync and then waiting for the changes to be applied. but it does not sync at all.
I found a way to sync my music files through autofill but I really wanted to sync ringtones but its not syncing and I really wanted to put ringtones in my phone please help.

If you see the cidya app, your iPhone is hacked with the cutsie term for this being jailbroken. This also means all the built in security has been removed making the iPhone as insecure as an android device.
Restore the iPhone with iTunes as a new iPhone or not from the backup to get rid of that hacking garbage. If the iPhone has hacked to be unlocked, the iPhone will no longer be unlocked when doing so.

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign. How can I fix this problem?

I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign. How can I fix this problem?

Start by rebooting the computer. If that doesn't work, search for adobefnt*.lst and delete all instances where * becomes a 2-digit number.

I can't get my password manager working. It remembers passwords for websites but when I enter in a new password (because this had to be changed) or when I have a new username + PW that I wish to save, the password manager does not appear.

I can't get my password manager working. It remembers passwords for websites but when I enter in a new password (because this had to be changed) or when I have a new username + PW that I wish to save, the password manager does not appear.

If you updated your existing account then try logging out of it on the iPhone by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPad.
If you created a new account then you can log out of the old account and in with the new one as above, but any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can re-download its content and download updates to its apps.

Problem - SCSM Change status workflow does not work, shows huge "minutes behind" in SQL, but do not appear as failed.

Similar Messages

Maybe you are looking for