Problem setting KEY-F7 or KEY-ENTQUERY

Hi to All,
In my form I have placed button for more actions, such SAVE, DELETE, ENTQUERY, RUNQUERY etc.
All work fine, but the default button F7 and F8 are active. I have tried to set this button with trigger key-f7, key-f8 etc., in order to execute the same actions that in my toolbar buttons.
For example in the trigger KEY-F7 I have this code:
BEGIN
     SET_ITEM_PROPERTY('TOOLBAR.BTNSAVE', ENABLED, PROPERTY_FALSE);
     SET_ITEM_PROPERTY('TOOLBAR.BTNEXIT', ENABLED, PROPERTY_FALSE);
     SET_ITEM_PROPERTY('TOOLBAR.BTNENTQUERY', ENABLED, PROPERTY_FALSE);
     SET_ITEM_PROPERTY('TOOLBAR.BTNRUNQUERY', ENABLED, PROPERTY_TRUE);
     SET_ITEM_PROPERTY('TOOLBAR.BTNDELQUERY', ENABLED, PROPERTY_TRUE);
     SET_ITEM_PROPERTY('TOOLBAR.BTNNEWREC', ENABLED, PROPERTY_FALSE);
     SET_ITEM_PROPERTY('TOOLBAR.BTNDELREC', ENABLED, PROPERTY_FALSE);
     SET_ITEM_PROPERTY('TOOLBAR.BTNHELPONHELP', ENABLED, PROPERTY_FALSE);
     SET_ITEM_PROPERTY('TOOLBAR.BTNPRINT', ENABLED, PROPERTY_FALSE);
     SET_ITEM_PROPERTY('TOOLBAR.BTNREFRESH', ENABLED, PROPERTY_FALSE);
     DO_KEY('ENTER_QUERY') ;
END;When I run the form and press F7 button the Form freeze and I must exit with Task manager.
I have tried also with key-entqry, but the result is the same.
I hope in Your help in order to resolve my problem.
Thank You and Best Regards
Gaetano

Try using ENTER_QUERY built-in instead of DO_KEY('ENTER_QUERY').
When you use DO_KEY you are saying to Forms that whenever DO_KEY('ENTER_QUERY') fires execute DO_KEY('ENTER_QUERY'), this is causing the Forms to enter an infinite loop.
For more information on DO_KEY built-in search the online help in your Forms Builder.
Tony

Similar Messages

How to set key fields in a Database view

Hi guru's
iam balaji,plz guide me with how to set key fields in a view.......that field is a non key field in the base table....
thanks in advance,
Balaji.S

take a look at this:
Diagnosis
    In the view, not all of the mandatory fields were included as key
    fields. The key of the view therefore is not unique.
System Response
    All the fields are regarded as key fields in order to guarantee that th
    key lengths are unique.
Procedure
    For views with a large number of fields, this could have a negative
    effect on the performance for the language construction described below
    In this case, all the mandatory key fields should be included in the
    view.
regards

Set Key Field in Import Manager

Hi All,
I have 2 fields in my source file(name,category) .category(look up Field) is the key field and name(display Field) is the matching field.
I got file like this......
Name                  category
1                           A
1                           B
1                           C
While importing i got an error stating that Import failed. The destination record was referred to by multiple source records. Duplicate source records should be merged before importing them.
Import action: Update (All Mapped Fields)Source record no: 1
But in this case my key field is Category based on category then these 3 records will be 3 different records.
Please let me know the use of Set Key field in the Import Manager and how it works?

Hi,
It's not about set of key field in MDM Import Manager but the reason is that you can not select more than 1 category(Lookup Taxonomy) in maintable for one record. thats why error is coming because for this Property Multi-valued always No.
Even, you can try this in Data Manager manually create three Category A, B and C in taxonomy mode on selecting Sub table Categories, then on selecting main table, when you select category field(which is lookup to categories table)for a particular record you could able to select only one category A, B or C.
i would suggest make a Attribute of type text having three values A, B and C and mark this as Multi-Valued in Attribute Detail and link this Attribute with your category. in this way you can attach three values A, B and C with your Record.
Other thing you can do,make this category field as (Lookup Hierarchy not lookup taxonomy) in main table to Subtable(Hierarchy) then for this field in main table you can set Property Multi-valued = Yes in MDM console and then after Import using MDM Import Manager finally only one record will get created in Data Manager as:
Name Category
1         A;B;C
Hope it will Help you,
Rewards if Useful.....
Mandeep Saini
Edited by: Mandeep Saini on Jun 20, 2008 8:46 AM

Thinkpad keyboard problem - some keys generate multiple keys when pressed

thinkpad keyboard problem - some keys generate multiple keys when pressed
For example, "t" generates "tr", "y" generates "yu", "backspace" generates "backspace" plus "IBM access connections", "m" generates "mn" and "n" generates "mn". Not all keys are wrong.
For what it's worth, the odd behaviour started shortly after a trip to Miami in which I had a meeting at a cafe in which we were undercover but it was pouring cats and dogs - it was like having a meeting in a sauna - so I am wondering if the high humidity could have caused the behaviour.
I tried replacing the keyboard but the new keyboard has the same problem.
The machine in question is a Thinkpad T23 running Windows XP Pro
Any help would be appreciated as I am now in Los Angeles using a borrowed Mac! :-)

i have something along the lines of the same problem.
http://bbs.archlinux.org/viewtopic.php?id=56777
my conclusion is something in the last system update screwed it up.

What is the syntax for set-key RSA-PUB in JCOP Shell?

I am trying to perform Put Key for the RSA DAP Verification Key using JCOP Shell.
I have tried variations of the following:
set-key 115/1/RSA-PUB/[128 byte public key modulus]
set-key 115/1/RSA-PUB/A001[1 byte public key exponent]A18180[128 byte public key modulus]
set-key 115/1/RSA-PUB/A001[1 byte public key exponent]A180[128 byte public key modulus]
But when I send the following command on a SSD with DAP Verification privilege after mutual authentication
put-key -m add 115/1
I get jcshell: Unknown exception: java.lang.ArrayIndexOutOfBoundsException: 161 (or 172)
Thanks,
Ming

The format for RSA-PUB is:
<pubexp length><pubexp><mod length><mod>
For example:
115/1/RSA-PUB/0301000180xxxxxx....

Problem managing keys/certificates with SunPKCS11

Hi:
I am trying to create a small applet to manage certificates stored on a smart card using SunPKCS11. I can successfully import a key/certificate from a P12 file, however I have some problems managing keys and certificates that appears to be related.
First, creating a KeyStore entry creates one object with one alias. But reading the card from another application such as safesign, I see a public object with the chosen alias but the private key appears with no alias specified. if I import the whole certificate chain, only the certificate will have the chosen alias the others will have no defined alias.
Everything works ok, I can sign with the certificate on the card. But managing certificates and keys becomes incompatible with other applications, if multiple keys . Is there some way I can specify the alias so it will show for the private object?
Secondly, I cannot get the installed certificate from my java application without authenticating. Other applications can read the certificate, authentication is required only to access the private object.
I see further that if I delete the private object with safesign but let the certificates remain, I no longer get any certificates or keys when listing from SunPKCS11, while safesign still lists the certificates. Also, I can't access the card read only to list certificates.
I think these things are related: SunPKCS11 creates and sees only one object which is protected if it has been created with SetKeyEntry.
Is there any way to gain more fine grained control over the key store with SunPKCS11?
Thanks, Erik

i came up with the same problem. Can you tell me your way to deal with it ?
thanks!
[email protected]

Is Anyone Else Having Problems With Key Chains After Installation?

My installation went ok but I'm having all kinds of problems with Key Chains now that I didn't before. In addition to them being corrupted, it won't let me save corrected names and passwords even when it asks for them.

Is there a fix if you don't have your Key Chains folder from before the 10.6 installation? I keep having to re-type my MobileMe and student Gmail passwords in Mail, and if I check remember password in Key Chain, I keep having to re-type the password until I uncheck the box, but then that means I have re-type the password every time I send an email or put the computer to sleep.
Also, Keychain Access's First Aid shows that there are no problems whatsoever. When I click on MobileMe in my System Preferences I get 8 or so consecutive errors stating "Keychain Error. There was a problem saving to your keychain. Try again or use Keychain Access to verify your keychain." When I look at my login within Keychain Access, it says my MobileMe keychain is restricted (even after entering my administrator password).

Problem with key Server in GETVPN

I had a problem with my key servers in GETVPN, I could not understand well so far. My two key servers had problems with being a key issue of inspiration and had other physical problems. I have configured the OPEN and CLOSED in my understanding communication between GM should continue with the same problem with key servers, but went more than 24 hours and ended up falling all GETVPN network. My question is as follows: after the fall of the keys, primary and secondary servers in more than 24 hours while the TEK keys no longer work and the whole network goes down and it even?
Eduardo Severo
[email protected]

Those fields should be on top of the view's field list. Also, the join conditions must be complete, e.g. also include MANDT, as far as I know.
The system defines all view fields as key fields, if it cannot otherwise determine a unique key based on the join conditions and the primary keys of the joined tables.
If that's not it, I have no further idea.
Thomas

Problems setting up a Domain - javax.management.InstanceNotFoundException

I am having problems setting up a Domain. The following steps summarize
what I have done.
1. Created FooDomain in d:/bea/wlserver6.0/config and created
appropriate config.xml, startup scripts, security, etc... (FooDomain
boots ok)
2. Moved console.war to bea/wlserver6.0/config/FooDomain/applications
3. Connected to FooDomain via console (works ok).
4. Defined machine FooMachine (happens to be localhost)
5. Defined new server FooServer (in addition to default myserver) and
assigned it to FooMachine.
6. Created a new directory d:/managedServers/FooServer (note - outside
installation directory)
7. Created directories d:/managedServers/FooServer/logs &
d:/managedServers/FooServer/applications
8. Copied sample startManagedServer.cmd from mydomain to
d:/managedServers/FooServer & modified appropriately.
9. Ran startManagedServer.cmd (Note: I was able to connect to the
Administration Server ok)
The problems are as follows. (From the console - pointing to the
Administration Server for the FooDomain)
1. I am unable to configure a DefaultWebApp_FooServer to be located at
d:/managedServers/FooServer/applications. I get the following exeption:
javax.management.InstanceNotFoundException:
FooDomain:Name=DefaultWebApp_FooServer,Type=WebAppComponent.
2. I get a similar error when trying to set FooServer log locations to
d:/managedServers/FooServer/logs
Any ideas as to why? This then begs the question, what if FooServer was
on a different physical server altogether. How would I define the
location of the DefaultWebApp and logs.
Thanks
jay ()

If you want your application work, think my way. At least, all my teammates have used this method to build their development environment. If you are more interested to debug for Weblogic, contact your support representative. The tools from Administration console look very nice, but not function as you want (e.g., the tool to convert version 5.1 application to version 6, even monitor tools). Administration console is very nice to be used to configue the parameters for a domain, but not so trustful and not for application setup in my own experience and that is why I suggest you use mydomain and DefaultWebApp_MyServer as templates. By the way, I did modify config.xml manually to change the default web application entry, etc, to what I want.
Jay Zammit <[email protected]> wrote:
I did not modify config.xml manually. In fact, I am able to boot both the Administration Server & Managed Server. The problem happens when using the Administration console to assign my logs and Default Applications directory to the d:/managedServers/FooServer/logs, and d:/managedServers/FooServer/applications/DefaultWebApp_FooServer directories. Try it yourself. Go to the Configurer WebApp option and type in a fully qualified directory such as d:/managedServers/FooServer/applications/DefaultWebApp_FooServer
and see if it works on your system.
thanks
jay ()
Xiang Rao wrote:
One suggestion. Use the default domain mydomain as a template. Just make a copy of "mydomain" in folder config and rename the copy to whatever you like. Use some help tools to search all files (non-binary files) in new domain for key word "mydomain" and replace these words with your new domain name. To build an application, just rename the DefaultWebApp_MyServer to what you like and search "DefaultWebApp_MyServer" in all files (non-binary files) in your new domain and replace these words with yournew application name. Note you need to modify the scripts accordingly. Then you can run "startWeblogic" in your new domain directory to start your new domain. Other parameters should be configured by Administration console. If you manually modify configuration files, you could expect some bad news without reason.
Jay Zammit <[email protected]> wrote:
I am having problems setting up a Domain. The following steps summarize
what I have done.
1. Created FooDomain in d:/bea/wlserver6.0/config and created
appropriate config.xml, startup scripts, security, etc... (FooDomain
boots ok)
2. Moved console.war to bea/wlserver6.0/config/FooDomain/applications
3. Connected to FooDomain via console (works ok).
4. Defined machine FooMachine (happens to be localhost)
5. Defined new server FooServer (in addition to default myserver) and
assigned it to FooMachine.
6. Created a new directory d:/managedServers/FooServer (note - outside
installation directory)
7. Created directories d:/managedServers/FooServer/logs &
d:/managedServers/FooServer/applications
8. Copied sample startManagedServer.cmd from mydomain to
d:/managedServers/FooServer & modified appropriately.
9. Ran startManagedServer.cmd (Note: I was able to connect to the
Administration Server ok)
The problems are as follows. (From the console - pointing to the
Administration Server for the FooDomain)
1. I am unable to configure a DefaultWebApp_FooServer to be located at
d:/managedServers/FooServer/applications. I get the following exeption:
javax.management.InstanceNotFoundException:
FooDomain:Name=DefaultWebApp_FooServer,Type=WebAppComponent.
2. I get a similar error when trying to set FooServer log locations to
d:/managedServers/FooServer/logs
Any ideas as to why? This then begs the question, what if FooServer was
on a different physical server altogether. How would I define the
location of the DefaultWebApp and logs.
Thanks
jay ()

Problems setting up WRT54G2 router

I'm having problems setting up my Linksys WRT54G2 router. I want my mac laptop (iBook G3 running OSX) to use a wireless connection, and the home computer (running Windows XP) to stay connected to the modem.
I originally tried to set up the router by connecting it via ethernet to my laptop (and by ethernet to the modem), and went into the 192.168.1.1 address to configure it. The internet works fine on my laptop when connected to the wireless by ethernet but it can't connect wirelessly (it has an original airport card fitted, at first I thought I might need to upgrade the firmware but I ran a software update and one didn't come up). I then realised that I would need to MAC clone from the PC, that is connected to the modem? I tried to do this today, but I couldn't access the 192.168.1.1 address from the PC. I have tried resetting the router, and disabling the firewall but still can't access it. This PC also has anti-virus software running too - could this be the problem, or am I setting it up wrong? Thanks.

If you are trying to Setup your Router with the setup disk, Then you can exit from the setup and configure your Router manually. Before you configure your router, you need to Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable.....
You need to connect your Modem to Linksys Router on Internet Port and your Computer to Linksys Router on Port No.1.
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link
Here are the Wireless Settings which you can set on your router, once done you can try connecting your MAC computer to your Wireless network and check if you are Online from MAC computer.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

HT1277 having problem setting up a second email account

I am having problems setting up a second email account on my imac. help!

In the Add Account dialog, enter the information, then hold down the option key and click Continue. Finish setting up the account manually.

I had no problem setting up my pop mail account for my primary email, but cannot set up a 2nd pop account for my secondary account. I'm using Ipad2. Can you help?

I cannot seem to set up a 2nd pop account on my Ipad2. No problems setting up the primary but the secondary keeps telling me that either username or password is incorrect. Both are correct. It's driving me crazy. Can someone help?
Thanks!

Maybe I'm not following completely, but you can configure email accounts manually, if you want. Just hold down the Option key when you click Continue on the first screen. You can then choose the type of account and set up the servers as you like.
This help page seems to think you can still use POP with Yahoo.
http://help.yahoo.com/kb/index?locale=en_US&page=content&id=SLN4724

Problems setting up username & password for SQL

Due to the outstanding advice I recieved from this excellent forum, I have managed to overcome my first problem with declaring a new Class.
This leads me to request help with my next biggest problem:
Setting up a user GUI that takes a "username" & "password" that will be used to access a password protected database.
I am a simple bloke, with simple thought processes, so please, go easy on me...
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
public class DBQuery1 {
     String username = "" , password = "";
     public static void main(String[] arguments) {
          PassDB UPass = new PassDB();
          String data = "jdbc:odbc:JavaTestDataBase";
          try {
               Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
               Connection conn = DriverManager.getConnection(data, "" + username, "" + password);
               Statement st = conn.createStatement();
               ResultSet rec = st.executeQuery(
                    "SELECT Title, ContactID, First, Last, Dear FROM Contacts "
                    + "WHERE (Title='Mr') ORDER BY ContactID");
          /*     ResultSet rec2 = st.executeQuery(
                    "SELECT Subject, ContactID FROM Calls "
                    + "WHERE (Subject Is Not Null) ORDER BY ContactID");
          System.out.println("\nFirst Name\tSurname\t\tNick Name\t\tSubject\n");
          while(rec.next()) {
               System.out.println(rec.getString(3) + "\t\t" + rec.getString(4) + "\t\t" + rec.getString(5) /* + rec2.getString(1) */ );
          st.close();
          catch (SQLException s) {
               System.out.println("SQL Error: " + s.toString() + " " + s.getErrorCode() + " " + s.getSQLState());
          catch (Exception e) {
               System.out.println("Error: " + e.toString() + e.getMessage());
class PassDB extends javax.swing.JFrame implements ActionListener {
     String username = "", password = "";
     JTextField uname = new JTextField(10);
     JTextField pword = new JTextField(10);
     // JPasswordField pword = new JTextField(10);
     PassDB() {
          super("duBe's database logon");
          setSize(220, 160);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          JPanel pane = new JPanel();
          JLabel unameLabel = new JLabel ("Username: ");
          JLabel pwordLabel = new JLabel ("Password: ");
          JButton submit = new JButton("OK");
          submit.addActionListener(this);
          pane.add(unameLabel);
          pane.add(uname);
          pane.add(pwordLabel);
          pane.add(pword);
          pane.add(submit);
          setContentPane(pane);
          setVisible(true);
     public void actionPerformed(ActionEvent evt) {
          PassDB clicked = (PassDB)evt.getSource();
          username = uname.getText();
          password = pword.getText();
This code generates two errors, stating:
C:\Java_progs>javac DBQuery1.java
DBQuery1.java:14: non-static variable username cannot be referenced from a static context
Connection conn = DriverManager.getConnection(data, "" +
username, "" + password);
^
DBQuery1.java:14: non-static variable password cannot be referenced from a static context
Connection conn = DriverManager.getConnection(data, "" +
username, "" + password);
                ^
2 errors*****************************
The code works when I remove the reference to the variables "username" & "password" in Connection "conn" call & replace them with the actual username & password, but this is not exactly what I was after. I was hoping to make the program responsive to each individual user, not set in code.
I also would like to make the program pause after the call in "main" to "PassDB" to wait for "PassDB" to exit before continuing.
I would also like to make "PassDB" destroy itself after the "OK" button is pressed & the "username" & "password" set.
If that isn't enough for you, I would really like the program to search 2 different database tables, return their values & compare them to be sure that they are the same.
When I try & search 2 different tables, as in:
ResultSet rec = st.executeQuery(
                    "SELECT Title, ContactID, First, Last, Dear FROM Contacts "
                    + "WHERE (Title='Mr') ORDER BY ContactID");
               ResultSet rec2 = st.executeQuery(
                    "SELECT Subject, ContactID FROM Calls "
                    + "WHERE (Subject Is Not Null) ORDER BY ContactID")javac tells me that "ResultSet" is set to null 0
As always, I am extremely appreciative of any assistance you are able to offer.
Kind regards
duBedat
[email protected]

This is where I'm at now:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
public class DBQuery {
     static String username = "" ;
     static String password = "" ;
     public static void main(String[] arguments) {
     PassDB UPass = new PassDB();
     String data = "jdbc:odbc:JavaTestDataBase";
     try {
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          Connection conn = DriverManager.getConnection(data, "" + DBQuery.username, "" + DBQuery.password);
          Statement st = conn.createStatement();
          ResultSet rec = st.executeQuery(
          "SELECT Title, ContactID, First, Last, Dear FROM Contacts "
          + "WHERE (Title='Mr') ORDER BY ContactID");
          /*     ResultSet rec2 = st.executeQuery(
               "SELECT Subject, ContactID FROM Calls "
               + "WHERE (Subject Is Not Null) ORDER BY ContactID");
          System.out.println("\nFirst Name\tSurname\t\tNick Name\t\tSubject\n");
          while(rec.next()) {
               System.out.println(rec.getString(3) + "\t\t" + rec.getString(4) + "\t\t" + rec.getString(5) /* + rec2.getString(1) */ );
          st.close();
     catch (SQLException s) {
          System.out.println("SQL Error: " + s.toString() + " " + s.getErrorCode() + " " + s.getSQLState());
     catch (Exception e) {
          System.out.println("Error: " + e.toString() + e.getMessage());
class PassDB extends javax.swing.JFrame implements ActionListener {
     static boolean getOut = false;
     JTextField uname = new JTextField(10);
     JTextField pword = new JTextField(10);
     // JPasswordField pword = new JTextField(10);
     public PassDB() {
          super("duBe's database logon");
          setSize(220, 160);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          JPanel pane = new JPanel();
          JLabel unameLabel = new JLabel ("Username: ");
          JLabel pwordLabel = new JLabel ("Password: ");
          JButton submit = new JButton("OK");
          submit.addActionListener(this);
          pane.add(unameLabel);
          pane.add(uname);
          pane.add(pwordLabel);
          pane.add(pword);
          pane.add(submit);
          setContentPane(pane);
          while(getOut == false)
               setVisible(true);
     public void actionPerformed(ActionEvent evt) {
          PassDB clicked = (PassDB)evt.getSource();
          DBQuery.username = uname.getText();
          DBQuery.password = pword.getText();
          getOut = true;
}          Any advice is greatly appreciated
duBe

Problems setting up an NFS server

Hi everybody,
I just completed my first arch install. :-)
I have a desktop and a laptop, and I installed Arch on the desktop (the laptop runs Ubuntu 9.10). I had a few difficulties here and there, but I now have the system up and running, and I'm very happy.
I have a problem setting up an NFS server. With Ubuntu everything was working, so I'm assuming that the Ubuntu machine (client) is set-up correctly. I'm trying to troubleshoot the arch box (server) now.
I followed this wiki article: http://wiki.archlinux.org/index.php/Nfs
Now, I have these problems:
- when I start the daemons, I get:
[root@myhost ~]# /etc/rc.d/rpcbind start
:: Starting rpcbind [FAIL]
[root@myhost ~]# /etc/rc.d/nfs-common start
:: Starting rpc.statd daemon [FAIL]
[root@myhost ~]# /etc/rc.d/nfs-server start
:: Mounting nfsd filesystem [DONE]
:: Exporting all directories [BUSY] exportfs: /etc/exports [3]: Neither 'subtree_check' or 'no_subtree_check' specified for export "192.168.1.1/24:/home".
Assuming default behaviour ('no_subtree_check').
NOTE: this default has changed since nfs-utils version 1.0.x
[DONE]
:: Starting rpc.nfsd daemon [FAIL]
- If I mount the share on the client with "sudo mount 192.168.1.20:/home /media/desktop", IT IS mounted but I can't browse it because I have no privileges to access the home directory for the user.
my /etc/exports looks like this:
# /etc/exports: the access control list for filesystems which may be exported
# to NFS clients. See exports(5).
/home 192.168.1.1/24(rw,sync,all_squash,anonuid=99,anongid=99))
/etc/conf.d/nfs-common.conf:
# Parameters to be passed to nfs-common (nfs clients & server) init script.
# If you do not set values for the NEED_ options, they will be attempted
# autodetected; this should be sufficient for most people. Valid alternatives
# for the NEED_ options are "yes" and "no".
# Do you want to start the statd daemon? It is not needed for NFSv4.
NEED_STATD=
# Options to pass to rpc.statd.
# See rpc.statd(8) for more details.
# N.B. statd normally runs on both client and server, and run-time
# options should be specified accordingly. Specifically, the Arch
# NFS init scripts require the --no-notify flag on the server,
# but not on the client e.g.
# STATD_OPTS="--no-notify -p 32765 -o 32766" -> server
# STATD_OPTS="-p 32765 -o 32766" -> client
STATD_OPTS="--no-notify"
# Options to pass to sm-notify
# e.g. SMNOTIFY_OPTS="-p 32764"
SMNOTIFY_OPTS=""
# Do you want to start the idmapd daemon? It is only needed for NFSv4.
NEED_IDMAPD=
# Options to pass to rpc.idmapd.
# See rpc.idmapd(8) for more details.
IDMAPD_OPTS=
# Do you want to start the gssd daemon? It is required for Kerberos mounts.
NEED_GSSD=
# Options to pass to rpc.gssd.
# See rpc.gssd(8) for more details.
GSSD_OPTS=
# Where to mount rpc_pipefs filesystem; the default is "/var/lib/nfs/rpc_pipefs".
PIPEFS_MOUNTPOINT=
# Options used to mount rpc_pipefs filesystem; the default is "defaults".
PIPEFS_MOUNTOPTS=
/etc/hosts.allow:
nfsd: 192.168.1.0/255.255.255.0
rpcbind: 192.168.1.0/255.255.255.0
mountd: 192.168.1.0/255.255.255.0
Any help would be very appreciated!

Thanks, I finally got it working.
I realized that even though both machines had the same group, my Ubuntu machine (client) group has GID 1000, while the Arch one has GID 1001. I created a group that has GID 1001 on the client, and now everything is working.
I'm wondering why my Arch username and group both have 1001 rather than 1000 (which I suppose would be the default number for the first user created).
Anyway, thanks again for your inputs.

Problems setting up static routing

HI
I'm having a problem setting up static routing. I keep getting the message "invalid static route". I have an E1550 router and my frimware is up to date. I have tried a few different gateway addresses ie 192.168.1.1, 127.0.0.1 and my router's address on the net, but I keep getting the same message. Has anyone else had this problem and been able to fix it?

I think the E1550 router supports LAN to LAN routing provided that you have two local networks. If you only have a plain modem and the E1550, I believe you can't do Static routing on that type of setup. Found this link that might help: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=12a84336a124498eb5d6f0204b85191e_17589.xml&pid=80&...

Problem setting KEY-F7 or KEY-ENTQUERY

Similar Messages

Maybe you are looking for