Problem starting application
hi am having problem when starting my application,it does not start it just freeze and show this log error,it does not even load the page,i even try to re-instll jedeveloper
Caused By: java.io.IOException: C:\Oracle\Middleware\jdeveloper\webcenter\modules\oracle.portlet.server_11.1.1\wsrp-tools.ear (The system cannot find the file specified) with : C:\Oracle\Middleware\jdeveloper\webcenter\modules\oracle.portlet.server_11.1.1\wsrp-tools.ear
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:127)
at java.util.jar.JarFile.<init>(JarFile.java:135)
at java.util.jar.JarFile.<init>(JarFile.java:99)
at weblogic.utils.jars.JarFileDelegate.<init>(JarFileDelegate.java:32)
Truncated. see log file for complete stacktrace
>
<08 Mar 2013 12:04:42 PM> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'wsrp-tools [Version=11.1.1.4.0]' due to error weblogic.management.DeploymentException: C:\Oracle\Middleware\jdeveloper\webcenter\modules\oracle.portlet.server_11.1.1\wsrp-tools.ear (The system cannot find the file specified) with : C:\Oracle\Middleware\jdeveloper\webcenter\modules\oracle.portlet.server_11.1.1\wsrp-tools.ear.
weblogic.management.DeploymentException: C:\Oracle\Middleware\jdeveloper\webcenter\modules\oracle.portlet.server_11.1.1\wsrp-tools.ear (The system cannot find the file specified) with : C:\Oracle\Middleware\jdeveloper\webcenter\modules\oracle.portlet.server_11.1.1\wsrp-tools.ear
at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:193)
at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:89)
Truncated. see log file for complete stacktrace
Caused By: java.io.IOException: C:\Oracle\Middleware\jdeveloper\webcenter\modules\oracle.portlet.server_11.1.1\wsrp-tools.ear (The system cannot find the file specified) with : C:\Oracle\Middleware\jdeveloper\webcenter\modules\oracle.portlet.server_11.1.1\wsrp-tools.ear
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:127)
at java.util.jar.JarFile.<init>(JarFile.java:135)
at java.util.jar.JarFile.<init>(JarFile.java:99)
at weblogic.utils.jars.JarFileDelegate.<init>(JarFileDelegate.java:32)
Truncated. see log file for complete stacktrace
>
<08 Mar 2013 12:04:44 PM> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<08 Mar 2013 12:04:44 PM> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log02826. Log messages will continue to be logged in C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<08 Mar 2013 12:04:44 PM> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<08 Mar 2013 12:04:45 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<08 Mar 2013 12:04:45 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<08 Mar 2013 12:04:45 PM> <Warning> <Server> <BEA-002611> <Hostname "HOSTNAMEDOMAIN", maps to multiple IP addresses: it, 0:0:0:0:0:0:0:1>
<08 Mar 2013 12:04:45 PM> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<08 Mar 2013 12:04:45 PM> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<08 Mar 2013 12:04:45 PM> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on it:7101 for protocols iiop, t3, ldap, snmp, http.>
<08 Mar 2013 12:04:45 PM> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:ac19:aa0:7101 for protocols iiop, t3, ldap, snmp, http.>
<08 Mar 2013 12:04:45 PM> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:0:100:7f:fffe:7101 for protocols iiop, t3, ldap, snmp, http.>
<08 Mar 2013 12:04:45 PM> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<08 Mar 2013 12:04:45 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<08 Mar 2013 12:04:45 PM> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 26115 ms.
IntegratedWebLogicServer started.
[Running application on Server Instance IntegratedWebLogicServer...]
[12:04:46 PM] ---- Deployment started. ----
[12:04:46 PM] Target platform is (Weblogic 10.3).
[12:04:48 PM] Retrieving existing application information
[12:04:48 PM] Running dependency analysis...
[12:04:48 PM] Deploying 3 profiles...
[12:04:52 PM] Wrote MAR file to C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee\drs\AutoGeneratedMar
[12:04:55 PM] Wrote Web Application Module to C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee\drs\ViewControllerWebApp.war
[12:04:56 PM] Info: Namespace '/persdef' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.
[12:04:56 PM] Info: Any customizations created while running the application will be written to 'C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.mds.dt\adrs\\AutoGeneratedMar\mds_adrs_writedir'.
[12:04:57 PM] Wrote Enterprise Application Module to C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee\drs
[12:04:57 PM] Redeploying Application...Edited by: adf009 on 2013/03/08 1:17 PM
Edited by: adf009 on 2013/03/08 1:20 PM
Hi,
could be default domain not created properly. see this
Integrated Weblogic domain
~Abhijit
Similar Messages
-
Problem starting applications (Core Dumped)
After performing a system upgrade, I have had some problems starting a number of programs including firefox, chromium, thunderbird and more. In an attempt to debug the problem myself I resorted to this Step-by-Step guide, however I'm not sure how to proceed from there. Below are some of the results i received while doing some testing.
-Firefox
Error message when run in terminal
Terminal Error Message
Terminal Error Message
gdb dump (pastebin)
-Thunderbird
Error message when run in terminal
Terminal Error Message
gdb dump (pastebin)
-Arora
Terminal Error Message
-Calibre
Terminal Error Message
Last edited by Ensisong01 (2014-09-02 19:48:36)jasonwryan wrote: ... ...
Thank you, both for moving this and also for the suggestion. And as suggested I have changed the site that i used to share my code.
twelveeighty wrote: ... ...
I had looked into that first error earlier, or more specifically that particular site. However if you scroll to the bottom you'll see that that error by itself should not be causing the program to crash.
In addition to that this problem does not seem to be limited to only application which leads me to suspect that a dependency has somehow been broken.
Note: Initial Message has been edited. -
Problem starting application server after intalling SAP NetWeaver 7.0 ABAP
Hi, guys
I installed SAP NetWeaver 7.0 ABAP on my laptop 3 days ago and it worked well.
But today, I encountered a problem when starting the application server with message "start operation timed out".
pls help me to solve the problem.
thanksFelipe, tudo bem?!
Este erro aparenta inconsistencia em algum pré-requisito, revise-os de acordo com o que é pedido no manual de instalação.
Abs. -
Problem starting or stopping dbconsole (Application Server 10.1.2.0.2)
Hi all,
i have problem starting application server dbconsole and i am getting following error in oracle_home/sid/sysman/log
2008-10-27 22:45:36 Thread-1 WARN http: snmehl_connect: connect failed to (localhost.mycompany.com:1830): A remote host refused an attempted connect op
eration. (error = 79)
2008-10-27 22:45:37 Thread-1 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =-240,and testTZoffset for America/New_York:-300 do not match
2008-10-27 22:45:38 Thread-1 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =-240,and testTZoffset for America/New_York:-300 do not match
i have seen in the metalink to set the timezone which might have got changed. but after running didn't get changed anything and this is on AIX 5.3 and since its day-light changing time
some old machines running on AIX timezone been changed. any advise or idea
Thanks,i found the solution. that is applying DST patch (AIX version 10.1.0.5)
-
its almost 10 months,i purchased ipad2 32 3G wifi.itinially i got problem with applications and safari shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs frequently.plz advise.
If you have followed the standard Apple troubleshooting processes (see user guide )
probably a trip to the local Apple Store Genius bar is called for before warranty runs out
Assuming the iPad has been released in your Country if not you may have to take it to a
neighbouring Country where it is available
This page will tell you ,via the drop down menu Countries that can support iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=ipa d -
Probleming when starting Application Sharing
Hello,
when I open the CLP and want to start Application Sharing I have to select a user from my contact list first (otherwise I get a message to do so). But after selecting an application to share the user is still not invated and I have to select him over the <i>Contacts</i> tab again. Does anybody have the same problem or know help?
Kind regards,
DominikHi Dominik,
Check whether RTC Services has been activated.
Check whether you have completed the steps mentioned in the help file below..
http://help.sap.com/saphelp_nw04/helpdata/en/ba/7996492eca44fa84af6e235d883041/content.htm
Hope this helps.
Regards,
venkat.
[Reward points for useful answers] -
I am having problem downloading application on Mac app store, when I try to login and start downloading the application, it will say "Your device cannot be verified"
Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Log out, log back in, and test. If there's no improvement, continue.
Step 2
Reset your computer’s PRAM. -
Premiere Elements 12: start application problem - an incompatible display driver massage
Premiere Elements 12: start application problem - "an incompatible display driver" massage
I did everything what I could find online forums. (Except messing with BIOS settings)
- Updated video cards drivers
- Set to “High-Performance GPU” in Catalasyt for application exe and gpusniff.exe
- Added “run as administrator” privileges
- Each time before trying to run the application I removed BadDriver.txt file
My laptop specification:
Product name: HP Pavilion dv6 Notebook PC
Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz
System memory: 8GB
Memory slot 1: 4GB SODIMM Samsung 1333MHz
Memory slot 2: 4GB SODIMM Samsung 1333MHz
Windows 7 Professional 64-bit Service Pack 1
Intel(R) HD Graphics Family 8.882.2.3000 (30/09/2011)
Radeon (TM) HD 6770M 8.882.2.3000 (30/09/2011) (newer updates are not available)
please help...cmbishop82
Did you go through the drill
a. video card driver version up to date according to the manufacturer of the video card
b. if so, deletion of the BadDrivers.txt file....for Premiere Elements 12 in Windows 7, 8, or 8.1 64 bit, the path is:
Local Disk C
Program Data
Adobe
Premiere Elements
and in the Premiere Elements Folder is the BadDrivers.txt file for version 12. The BadDrivers.txt file is a file in this Premiere Elements Folder which also contains folders. You do not want anything in those folders. All you want is the BadDrivers.txt file in the Premiere Elements Folder.
Make sure that you have Folder Option Show Hidden Files, Folders, and Drives active so you can see that complete path.
The rationale for the being of the BadDrivers.txt file has its origins in post 10 of the following older thread
http://forums.adobe.com/message/3177024
When you get the display card error message, is it before you import media into the project? And, when you get the message, does the program allow you to continue by pressing a Continue Button or are you stopped from going further?
ATR -
Hi. An application me and my friends are having some problems starting is called League of Legends and we want to know more why we cant start the app.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
With only Yahoo account in my Macbook Air "Mail", everything works perfectly. Problem started when I added my Gmail account. It keeps on asking my account and keychain passwords. And all my accounts always works offline.
It sounds like you may need to go into Mail>Preferences>Accounts and Complete setting up you Gmail account. It may not be finished being setup. For instance, note the line below to be selected from the drop down list in "Outgoing Mail Server (SMTP", then "Edit SMTP Server List":
Hope this helps -
Java Web Start application failing on my user account
Hi All,
I've been tearing my hair out over this for a while and haven't been able to get anywhere wiht it. I've finally cracked and decided to post a plea for help in here.
Basically, I have a web start application that will not start under my user profile but will under a new account I created. If I try and start it from the terminal with javaws I get "Bus Error" and that's all. Double clicking it gives me a crash dialoge box and the details can be seen here:
http://pastebin.com/m77b1111f
As I said before, running it in the other account works fine as does "sudo javaws /path/to/app.jnlp" but I really don't want to have to do that every single time.
I've deleted the JavaCache folder as well as any ~/Library/Preferences/java.plist all without any joy. Also, I'd like to add that there are a number of other Web Start apps that run without any problems.
Any ideas?Thing is, if there was corruption of something that was system wide, it wouldn't work under a different profile, right?
Unpredictable as to how lomg it would work on a new account.
Is this usually the case for a safe boot?
Yes, it runs fsck_hfs -fy on the whole drive, dumps several caches & so on, the next boot will also take longer than usual as it rebuilds caches & so on. -
Java web start application runs too slow...
Hello,
I am new to Java Web Start. I have created a java web start application and when i enable web start from local Execution, then it works perfectly well. But when i upload it on server and then download the application, then it is too too slow...i mean it takes minutes to get the output on clicking some button....my jnlp file is as under:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<jnlp codebase="http://(web server code base)" href="launch.jnlp" spec="1.0+">
<information>
<title>ERD</title>
<vendor>Deepika Gohil</vendor>
<homepage href="http://appframework.dev.java.net"/>
<description>A simple java desktop application based on Swing Application Framework</description>
<description kind="short">ER Deign Tools</description>
</information>
<update check="always"/>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.5+"/>
<jar href="ERD_1_2.jar" main="true"/>
<jar href="lib/appframework-1.0.3.jar"/>
<jar href="lib/swing-worker-1.1.jar"/>
<jar href="lib/jaxb-impl.jar"/>
<jar href="lib/jaxb-xjc.jar"/>
<jar href="lib/jaxb1-impl.jar"/>
<jar href="lib/activation.jar"/>
<jar href="lib/jaxb-api.jar"/>
<jar href="lib/jsr173_api.jar"/>
<jar href="lib/ant-contrib-1.0b3.jar"/>
<jar href="lib/jaxb-impl.jar"/>
<jar href="lib/jaxb-xjc.jar"/>
<jar href="lib/FastInfoset.jar"/>
<jar href="lib/gmbal-api-only.jar"/>
<jar href="lib/http.jar"/>
<jar href="lib/jaxws-rt.jar"/>
<jar href="lib/jaxws-tools.jar"/>
<jar href="lib/management-api.jar"/>
<jar href="lib/mimepull.jar"/>
<jar href="lib/policy.jar"/>
<jar href="lib/saaj-impl.jar"/>
<jar href="lib/stax-ex.jar"/>
<jar href="lib/streambuffer.jar"/>
<jar href="lib/woodstox.jar"/>
<jar href="lib/jaxws-api.jar"/>
<jar href="lib/jsr181-api.jar"/>
<jar href="lib/jsr250-api.jar"/>
<jar href="lib/saaj-api.jar"/>
<jar href="lib/activation.jar"/>
<jar href="lib/jaxb-api.jar"/>
<jar href="lib/jsr173_api.jar"/>
</resources>
<application-desc main-class="erd.screen1">
</application-desc>
</jnlp>
I dont understand the reason. Could you please help me out.
Thank you,
Deepika Gohil.Check your web server's access logs to see how many requests web start is sending for each jar. After you've loaded the application the first time, for each subsequent launch, if you've got everything configured right, you should only see requests for the JNLP file and maybe some gifs because web start should load everything else out of the cache (if you're using the version-based download protocol). Or if you're using the basic download protocol, then you might see requests for each jar file, but even in this case, if your web server is prepared to evaluate the last-updated attribute for each jar request and for jars that have not changed, respond with no actual payload and a header value of Not-Modified, then that should run almost as fast.
You might also want to consider changing the "check" attribute of the "update" element from "always" to "background" for a couple of reasons. It should allow your app to start sooner (but this means that you might have to launch once or twice after an update is applied to the web server before the update shows up on the workstation). Also, my impression is that "always" is broken and prevents web start from ever checking to see if your jnlp file has been updated if you launch your app from a web start shortcut - launching from a browser is less likely to have this problem, depending on how often your browser is configured to check for updated resources. -
Java Web Start application doesn't run in Tomcat
I successfully did a Java Web Start example for me to learn then I tried another one where I encountered an error:
This is what Tomcat 6.0.18 says. The deploy is successful but when I try to run the web start application
with this htmlcode
<A href="http://localhost:8080/ConvertorValutar/app/launch.jnlp">I get this error witch leads me to think that it can't find the jar correct ?
type Status report
message /convertorvalutar/
description The requested resource (/convertorvalutar/) is not available.Appendix:
This is how I am doing the JAR
jar cfvm convertorvalutar.jar myManifest2.mf Java*.class IRata*.class The myManifest2.mf is
Main-class: JavaWebStart_Convertor witch is the main class
This way I am doing the WAR:
del *.war /F /Q
jar cfv convertorvalutar.war app/* WEb-INF/*This is the correct directory structure
│ faWar.bat
│ convertorvalutar.war
│
├───app
│ ConvertorValutar.jar
│ launch.jnlp
│
└───WEB-INF
│ web.xml
│
└───lib
jnlp-servlet.jarThis is the web.xml
<?xml version="1.0" encoding="iso-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<!-- Standard Action Servlet Configuration (with debugging) -->
<web-app>
<servlet>
<servlet-name>JnlpDownloadServlet</servlet-name>
<servlet-class>jnlp.sample.servlet.JnlpDownloadServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>JnlpDownloadServlet</servlet-name>
<url-pattern>*.jnlp</url-pattern>
</servlet-mapping>
</web-app>
</web-app>This is the jnlp:
<?xml version="1.0" encoding="UTF-8"?>
<jnlp codebase="http://localhost:8080/convertorvalutar/app">
<information>
<title>Convertor Valutar</title>
<vendor>remus.dragos</vendor>
<description>Simple Java Web Start Example</description>
</information>
<resources>
<j2se version="1.5+"/>
<jar href="ConvertorValutar.jar"/>
</resources>
<application-desc main-class="JavaWebStart_Convertor"/>
</jnlp>Where is the problem?
Edited by: remus.dragos on Dec 9, 2008 7:14 PMI did checked the names again and I found that the makeJar.bat had an "issue".
It missed the del *.jar and I had 2 uppercase letters like ConvertorValutar, instead of convertorvalutar.jar.
After that I rebuild the war and deployed and it works :)
Thanks. -
Java Web Start 1.6 fails to start application without Java Consol on Vista
Hi All,
I've faced with problem related to starting my application in IE 7 on Vista SP1 using Java Web Start (JRE 1.6.0_12 and 1.6.0_13). I suppose that issue appears after 11th update of JRE 1.6 since it works fine before.
There were set settings to indicate initial and maximal size of the Java heap in the JNLP file.
Application consist of 2 JAR files and they are signed with the same certificate.
When user tried to start application there is no any activity after accepting certificate. After starting application javaw.exe just disappeared from processes list without any message or error.
When I changed default setting in Java Control Panel to show Java Console, I noticed that the application began to start. But it's not a solution of the issue, since all customers cannot be required to turn on Java console.
I believe this is a bug in JRE as the application starts with Java console and doesn't without it.
When I browsed the web looking for the solution or an advice I found Release notes for 1.6.0_014 where it was said that 6u14 Java Web Start failed to launch and notifies that JARs were not signed, if an insecure Java system property was specified in a sandbox JNLP file. In spite of that 14th updated wasn't used and there was no notification I tried to start application without settings for the Java heap and it worked.
Could someone help me with advice, since the application cannot be started with default heap size settings.
Thanks in advance.
Edited by: vovanst on Jul 28, 2009 8:06 AMHi,
as the 6u15 just arrived and the above mentioned bug should've been fixed (though I was unable to verify through the release notes), the error is still in there.
We have no timestamped jars, neither ours nor the bouncy castle ones, all certs are valid, ours is self signed.
6u13 runs, 6u14/6u15 won't.
I followed the instructions here: http://bouncycastle.org/devmailarchive/msg10415.html to no avail.
The bcprov.jar is wrapped in its own jnlp and referred as extension from the "main" jnlp.
The interesting parts of the stack trace are these:
Caused by (via getCause): java.lang.SecurityException: JCE cannot authenticate the provider BC
at javax.crypto.Cipher.getInstance(DashoA13*..)
at javax.crypto.Cipher.getInstance(DashoA13*..)
Caused by (via getCause): java.util.jar.JarException: Cannot parse https://localhost:8443/deploy/bcprov.jar
at javax.crypto.SunJCE_c.a(DashoA13*..)
at javax.crypto.SunJCE_b.b(DashoA13*..)
at javax.crypto.SunJCE_b.a(DashoA13*..)
at javax.crypto.Cipher.getInstance(DashoA13*..)
at javax.crypto.Cipher.getInstance(DashoA13*..)
For me it seems there's a problem with resolving the url of the bcprov.jar, which would explain the lack of a delay which normally occurs when JCE verifies the signature of the bcprov provider classes. The error pops up almost instantly.
I'm clueless what to do now. Did Sun really achieve to completely destroy JCE provider functionality in Javaws, forcing us to use an alternative implementation?
Patric -
Unable to launch web start application
Hi Please can any one help me.
I have a problem in launching the web start application.
As i am the beginner i need help from you people.
I have created three class files as below.
Aeon_PManager.java
SimpleSerial.java
SimpleSerialNative.java.
We have to create a SimpleSerialNative.dll in the same folder where we are saving all the class files.
The jnlp file that i have written is as follows:
<?xml version="1.0" encoding="utf-8"?>
<!-- JNLP File for Aeon HHBM Manager Application -->
<jnlp spec="1.0+" codebase="http://zycomm:8080" href="Aeon.jnlp">
<information>
<title>Aeon HHBM Manager</title>
<vendor>ME</vendor>
<description>Aeon HHBM Manager</description>
</information>
<offline_allowed/>
<resources>
<j2se version="1.4+"/>
<jar eager="true" href="SimpleSerialNative.jar" main="true"/>
<jar href="lib/Aeon_PManger.jar"/>
<jar href="lib/simpleSerialNative.jar"/>
<jar href="lib/simpleSerialNatived.jar"/>
<jar href="lib/simpleSerial.jar"/>
</resources>
<application-desc main-class="Aeon_PManager.Main" />
<component-desc/>
</jnlp>
I am using Tomact6.0 server.
I am saving the jnlp file and jar files in the path below
tomcat6.0/webapps/root
Is it wrong to do so. If it is then what should i do to launch the application.
Is it necessary for me to create jar files for all classes seperately.
should i create jar file for simpleSerialNative.dll also.
These are the error messages that I am getting:
In general tab:
An error occured while launching/running the application
Title:Aeon HHBM Manger
Vendor:Me
Category:DownloadError
Unable to load resource http://zycomm:8080/Aeon_PManager.jar
Exception tab:
jnlp exception[category download error: exception: java io.ioexception:http response 404 launchdesc:null]
at com.sun.javaws.cache.DownloadProtocol.doDownload(Unkown Source)
at com.sun.javaws.cache.DownloadProtocol.getDownload(Unkown Source)
at com.sun.javaws.LaunchDownload.downloadJarFiles(Unkown Source)
at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unkown Source)
at com.sun.javaws.Launcher.downloadResources(Unkown Source)
at com.sun.javaws.Launcher.handleApplicationDescUunkown Source)
at com.sun.javaws.Launcher.handleLaunchFile(Unkown Source)
at com.sun.javaws.Launcher.Run(Unkown Source)
at java.lang.Thread.run(Unkown Source)
Wrapped Exception Tab
java io.IOexception:HTTP response 404
at com.sun.javaws.cache.DownloadProtocol.doDownload(Unkown Source)
at com.sun.javaws.cache.DownloadProtocol.getDownload(Unkown Source)
at com.sun.javaws.LaunchDownload.downloadJarFiles(Unkown Source)
at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unkown Source)
at com.sun.javaws.Launcher.downloadResources(Unkown Source)
at com.sun.javaws.Launcher.handleApplicationDescUunkown Source)
at com.sun.javaws.Launcher.handleLaunchFile(Unkown Source)
at com.sun.javaws.Launcher.Run(Unkown Source)
at java.lang.Thread.run(Unkown Source)1) I totally agree with Andrew
2) You have 3 classes and 5 jars, how's that?
3) Either you don't respect naming conventions and have uppercase packages or you don't know the difference between a jar and a package. Are you really a Java programmer?
4) You jnlp names out lib/Aeon_PManger.jar while your stack trace claims not to find http://zycomm:8080/Aeon_PManager.jar (the lib path is missing and Manager is not missing any 'a'). How badly did you mess pasting?
5) You're asking if you should package simpleSerialNative.dll without giving out any detail, do you suppose we have a universal knowledge of all existing APIs? Anyway you already got an answer to this in your other post.
6) You're a lucky man, 'cause I really love dukes, so I'll tell you what you should do (and I expect to give out 10 dukes on both posts): have a single jar within everything in it and execute it as stand alone app. Command: *java -jar YourJar.jar* (if you declare main class in manifest), or *java -cp YourJar.jar YourClassFullName*. Once you get it working you'll be ready for JWS deploy issues. If you can't get even there, take this advice: give up java (and maybe the all programming staff)!
Bye.
Maybe you are looking for
-
Bluetooth from Sony E to iPhone4
Hi, I just got the iphone4 and want to beam my contacts from my old sony erricson c902 to my iphone but does not want to work.Any suggestions? Thank you
-
Unable to log into Process Control 2.5
Hi all, I'm currently trying to install PC 2.5 and I'm getting an error while trying to connect to it using the NWBC. I can see the login screen in NWBC, then once logged I get the following error message "Could not load content from connection Proce
-
Incorrect dates in the side bar of time machine backups
Hi *I have problem with my Time Machine history side bar dates display. When I select TM everything is OK up to "yesterday" backup then beyond that point history sidebar shows dates when TM was created (Monday 04. January 2010). If I select any "Mond
-
ELVIS 1 AND ELVIS II LABVIEW VIs COMPATIBILITY
I am currently working on a project that was previously using Labview (8.5.1) vis built for elvis I, we have now moved on to Elvis II and are experiencing problems that are believed to be steming from the differences in channel configurations. Could
-
Please could you help my iphone 5 is stuck while in recovery mode, there is a USB sign and an arrow is pointing to itunes symbol, with the Itune red logo symbol