Problem Switching/Changing a page in one parent tab to another

I have 2 level tabs in my application. Lets call the 'top' set of tabs, Parent1 and Parent2.
Parent2 has only one tab 'below' or contained in it. While in Parent1, there are many tabs below it, each refers to a specific page that has some apex reports. I'm just trying to move one of those "sub" tabs and the corresponding report from Parent1 to Parent2.
To do that, in Application Builder, i click on the page that i want to essentially switch form Parent1 to Parent2. I can see under the Tab section, what its called on the right side, under Tabs. Lets call that Tab_X. So, i click on that Tab_X, and it allows me to edit the Tab itself. Now I open up the drop down box called "Standard Tab Set", and there, i can see my Parent1, and Parent2 sets. It is already selected to Parent1. So i change it to Parent2. Save/Apply.
Then i go run my application, and I do not see that Tab_X tab in Parent1 anymore (which is good-i wanted to move it). I click on the Parent2 top level tab, and there I can see the Tab_X in the sub-tab list, which is also good. So far.
When i click on Tab_X to run my report, it runs and outputs fine. But i lose my Parent tabs in the Parent tab bar. My subtabs look like the ones it was grouped with in Parent1, even though i can't see Parent1 or Parent2.
It seems like it sort of half made my change but not fully, and my navigation is now essentially not working properly.
Am I missing a step to do this change correctly?
Thanks.
Edited by: user12602240 on Apr 1, 2013 3:04 PM

btw, i am using the Sand theme. Not sure if that matters.

Similar Messages

I can only see one parent tab from the 2 level Tabs

Hello,
I have some pages, lets say page A, B, C, D.
Now I have a standard tab-set for the pages A and B, its named S1 (and has tabs for the page A and B).
I have another tab-set for the pages C and D, this is named S2 (and has tabs for the page C and D).
Now I have a parent tab to select the standard tab-set S1, this is named P1.
And I have another parent tab to select tab-set S2, this is named P2.
I can now only see one parent tab (P1 or P2), but I cant change from P1 to P2. The standard tabs are working good to select between A and B (or C and D).
As a picture, I see my tabs like this:
_____________P1
A__B
or
_____________P2
C__D
but I want to have:
___________P2 P1
A__B
or
___________P2 P1
C__D
Can anyone help me?
Regards,
Mark

Hm, interesting. I found out that the parent tabsets work both ways:
1) You need to tell the parent tabset for which page it is current
2) you need to tell the page which parent tabset to use

Copy a publishing page from one Web Application to another

can we copy a publishing page from one web application to another.
If we download a copy from pages library of one web application and upload it to another library of other Web application.
Once uploaded it came up with an error "This page is not using a valid page layout. To correct the problem, edit page settings and select a valid page layout.".

It seems like the page layout is missing in target location. Check similar thread below to solve the issue
http://social.msdn.microsoft.com/Forums/en-US/99c24657-0297-4a5c-8600-467bb6ea57d6/this-page-is-not-using-a-valid-page-layout-to-correct-the-problem-edit?forum=sharepointdevelopmentprevious
shipoint.com/2014/03/28/fixing-this-page-is-not-using-a-valid-page-layout-to-correct-the-problem-edit-page-settings-and-select-a-valid-page-layout-error-in-sharepoint-2010/
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Transferring pages from one iweb site to another

Thank you for any feedback or suggestions.
I have finally gotten a separate .mac & iweb account for my business. Now I would like to take my business pages/site off my personal iweb account and transfer everything to the business iweb. How do you do that?
Following the threads on these forums I managed to get a second user, new .mac, etc. Thank you for all that help.
Devv

Hi there,
The only way to move iWeb pages from one user account to another is to move the Domain.sites2 file where iWeb stores its files. To find that file go to
User/Library/Application Support/iWeb/Domain.sites2
If you can’t find it here search for it with spotlight. Note that the extension .sites (iWeb 1.0) or .sites2 (iWeb 2.0) may be hidden, also search for Domain only. To see if a Domain file is iWeb ’06 or iWeb ’08 select the file press Command(Apple)+i under "Name & Extension" you will find that it is .sites or .sites2.
Once you found it duplicate it (Command(Apple)+D). They are now completely independent from each other. So when you make a change to one site it will be saved only to that Domain file and not to the other.
Now take the copy of the Domain file and transfer it from one user account to the other.
To transfer your domain.sites2 file from one user account to the other you can put it on a USB-Stick, External Harddrive, on a CD/DVD or whatever. Not a great idea if you have a large Domain.sites2 is to send it by e-mail.
To get the site showing up in iWeb just open the Domain.sites file by double clicking on it and your sites and pages will show up on the left side in the iWeb page browser. Note that the location, where you put the file, doesn’t matter.
As you already created your and your business’ website they are both in the Domain file. What you then have to do, once you have it on both user accounts, is to delete your private website in business' account and the business' site in your private account. The rest will be preserved.
NOTE 1: Note that you have to change permissions of the Domain file to be able to edit, save changes and publish a website from another user account and from another computer as well.
Select Domain file press Command(Apple)+i under Ownership & Permissions go to =>Details =>Others and select Read & Write
You have to do that in the original user account and computer in which the Domain file was created.
If you don’t change permissions you will find an error while publishing and saving.
Remember to always have a Backup of both Domain files. It's REALLY important.
http://alyeska.altervista.org/en/iWebBackupWebsite.html
Regards,
Cédric

How do I transfer Pages from one user account to another

How do you transfer Pages from one user account to another on the same Mac?

Welcome to the Apple Support Communities
If you haven't modified anything, Pages is installed on /Applications. All users have access to this folder, identified as "Applications" on the Finder sidebar, so you don't have to move anything, because Pages will work on all your users.
If you have installed Pages on ~/Applications (being ~ your user folder), then you have to move Pages to /Applications. After doing this, you will be able to access to Pages on all users

Copying a page from one picture book into another

Does anyone know how to copy a page from one picture book into another. I have made 2 books and would like to make a third consisting of pages from the first 2 but seem unable to do it without starting again, or at least starting from a duplicate of one and re doing all the missing pages.

Garageclan
Welcome to the Apple user to user assistance forums
print each page you want to include in "book 3" to a PDF and use the send PDF to iPhoto option - this will give you the pages as images in iPhoto that you can them place into "book 3"
See Old Toad's tutorial #19 for more details - http://web.mac.com/toad.hall/OldToadsTutorials/No._19.html - note that it is slightly different - you are only using the beginning part
LN

Move group of pages from one InDesign file to another InDesign File using VB.Script

Dear team,
I am trying to move group of InDesign pages from one indesign file to another indesign file using vb.script.
I have written the code like
Dim Pages=IndDoc.Pages
Dim Mytype=TypeName(Pages)
Pages.Move(InDesign.idLocationOptions.idBefore,IndDoc1.Pages.LastItem)
but it is giving an error as method Move is not a member of Pages
please give mme the solution to move the Multiple pages or a group of page from one Indd to another Indd.

Hey Peter, if I wan to move several page that part of Auto Flow text, I checked the "delete page after moving" but the content still there, not deleted.
Is there any way to delete it automatically, just to make sure I have moved that autoflowed page?

I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found

I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found this?

You need to give a lot more information about the media specifications and the project properties you're using in the different projects.

Looking for a way to move entire pages from one photo book into another photo book.

I haven't found out how to move pages from one photo book into another. Surely this is possible?
Also on the subject of photo books: it seems that it is not possible to enlarge the size of a text box. Or has anyone found a way to accomodate more than 1 line of text on a photo book page?

You can look through some of the different Layouts available.
Select your page.
Click the "Layout" icon on the lower right hand of the application window.
Above it will appear a "BACKGROUND" section and a "LAYOUT" section.
Immediately below the "LAYOUT" is a drop down menu which will show you all the different options.

How do I copy a page from one pdf document to another?

I am a newbe!

That was easy.Thank you.
Re: How do I copy a page from one pdf document to another?
created by George Johnson in Creating, Editing & Exporting PDFs - View the full discussion
If you open both documents, you can drag a page from the Pages panel (on the left of the window) of one document and drop it into the Pages panel of another.
You can also extract one or more pages from a document to create a new document, and then insert the pages from this new document into another. In Acrobat 11 you 'd do this by doing:
Tools > Pages > Extract
and then:
Tools > Pages > Insert from File
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6163925#6163925
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6163925#6163925
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6163925#6163925. In the Actions box on the right, click the Stop Email Notifications link .
Start a new discussion in Creating, Editing & Exporting PDFs at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 .

Installed 3.6.8 and now cannot switch from one open tab to another

my home page automatically opens 4 tabs, I updated to 3.6.8 on my mac laptop. Now when the tabs are open I cannot go from one open tab to another even though the tabs are still up.

Download iTunes from Apple's web site and install it. Don't use Software Update.

How to change the value from one input control to another input control?

Hi Experts,
I want to change the value from one input control to another input control. For Example if i change month in first tab. it should reflect in second tab also. How should we acheive through input control or some other option.
Here I attached screen shot.Please help me for this

Hi,
It is not possible to have Input controll in all tabs that will be set from another .
But There is one workaround .
Follow the link below .
http://davidlai101.com/blog/2013/08/13/web-intelligence-input-control-that-affects-all-tabs/

How can i change the data from one Time Capsule to another?

How can i change the data from one Time Capsule to another?

Do you mean copy it? If so, see #18 in Time Machine - Frequently Asked Questions You'll need section 2 there.
If you mean something else, please clarify.

How do i transfer data from one internal tabe to another.

Hi All,
         How do i transfer data from one internal tabe to another.
         Can i do it ebven if he tables are different in structure.
Please Advice.
Thanks in advance.

Hi Saket Tiwari,
I hope the earlier post by kashyap is good enough an answer. anywas in addition to it let me give a detailed
explanation of how you can populate an internal table.
1) Append data line by line.
     Syntax : APPEND [<wa> TO / INITIAL LINE TO] <itab>.
this appends new line to internal table <itab>.
2) Using COLLECT statement.
             COLLECT is another form of statement used for populating the internal tables. Generally COLLECT is used while inserting lines into an internal table with unique standard key. The syntax for COLLECT statement is as shown
     Syntax : COLLECT [<wa> INTO] <itab>.
3) Using INSERT statement
     Syntax INSERT [<wa> INTO / INITIAL LINE INTO] <itab> [index <idx>].
INSERT statement adds a line/work area to the internal table. You can specify the position at which the new line is to be added by using the INDEX clause with the INSERT statement.
Now coming to your request..
To append part or all of an internal table
     Syntax
              APPEND LINES OF <itab1> [FROM <n1>] [TO <n2>] TO <itab2>.
*     Note:
Without the FROM and TO options, this statement appends the entire table <itab1> to <itab2>.*
b) To insert part or all of an internal table into another internal table
     Syntax
          INSERT LINES OF <itab1> [FROM <n1>] [TO <n2>]
          INTO <itab2> [INDEX <idx>].
c) Using Move statement.
To copy entire contents of one table into another in one execution
     Syntax MOVE <itab1> To <itab2>.
               OR
          <itab1> = <itab2>.
but u hav to be careful because he contents of itab2 will eb overwritten on the execution of this statement.
These copy the contents of ITAB1 to ITAB2. Incase of internal tables with header line we have to use [] inorder to distinguish from work area. So, to copy contents of internal tables with header line the syntax becomes,
ITAB1[] = ITAB2[].
Coming to the letter part of your question, Yes, we can copy values between tables having different structures.
for this we use
                            MOVE-CORRESPONDING <itab1> TO <itab2>
    this executes the statement for their header lines. Searches for the sub-fields which occur both in itab1 and itab2 and then generates, for all relevant field pairs which correspond to the
        sub-fields ni , statements of the form MOVE itab1-ni TO itab2-ni. The other fields remain unchanged.
I hope the information provided has been of your help.
Reward if useful.
Regards,
Jose

When I open up a new tab on firefox, the bar shows that the tab is there, but when I click on it, it is the same page as what I have before. When I try to change the page on the "new tab" the original tab changes. Why does this happen and how do I fix it?

This problem is even occuring as I type this information. I tried to click a "show details" button and it didn't work. The tab "opened" but I couldn't get the page to switch to the tab after clicking on it.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Problem Switching/Changing a page in one parent tab to another

Similar Messages

Maybe you are looking for