Problem to generate SRM 7.0 configuration guide into solman

Hi gurus,
We have a problem to generate SRM 7.0 configuration guide related to business scenario plan driven procurement with supplier collaboration into transaction SOLAR02.
We are using Solution Manager 7.0 and when we execute the configuration guide download, the system starts dowloading some files and after that ask for us execute a ms word macro to generate the guide, but the ms word file generated is empty.
Can anybody help me with this issue or tell me if there is another way to get the configuration guide we need?. Thanks in advance.
Regards,
Horacio

Hello Horacio,
You may want to check yuor MS Word Client Trust Center settings.
Typically you should have "Enable all Macros" and "Trust Access to the VBA Project Object Model" Checked.
I thought of this when you mentioned you were requested to run an MS Word Macro and it generated a blank file.
Without these settings enabled, could be why a blank report is generated. So you may want to check these settings and, if they are not set, then it would be worthwhile to enable them and try to generate with the MS Word Macro again.
Regards,
Paul

Similar Messages

In Solution Manager, where can I find the SRM 7.0 Configuration Guide?

Please give me directions on how to download the SRM 7.0 configuration guide within Solution Manager, these documents are not available on the service marketplace. We have sol manager 4 I believe, it's not sol manger 7.0.
Also, if you could send me the guide at matt.joseph at thq.com that would save me from losing more time trying to figure out Solution Manger
Thanks for your help.
Matt

Matt,
1. Log on to your SAP Solution Manager system.
2. To be able to access configuration documentation, create a project as follows:
1. Create your project with transaction SOLAR_PROJECT_ADMIN for project administration.
2. Connect your SAP system to SAP Solution Manager with transaction SMSY for the SAP Solution Manager system landscape.
3. Create a project structure and add the required scenarios for your SAP system to your project structure with the Business Blueprint transaction SOLAR01,
4. Add your SAP system configuration structures to your project structure with the configuration transaction SOLAR02.
3. Go to the project structure folder <project name> using transaction SOLAR02.
4. Access configuration documentation for SAP NetWeaver usage types at Configuration StructureSAP NetWeaver 7.0.
5. Access configuration documentation for all areas of SAP SRM at Configuration StructureSAP SRM <release>.
Nesimi

SRM 7 & SRM MDM installation & configuration guides required

Hello,
I urgently need to get my hands on SRM 7 & SRM MDM instal/config guides and release notes
I currently donot have access to OSS.
Can somebody please kindly email them to me on:
Your help will be greatly appreciated.
Thank you

Hi
Check out this link
http://help.sap.com/saphelp_srm70/helpdata/en/74/344c430fab4d0bbc30996d56cc293a/frameset.htm
Thanks
Uday

No Configuration Guide for LAC generated

Hello,
I´m just finished the generation of the Configuration Guideline for SRM5.0 by the Solution Manager. But I´m looking for the configuration guide of the Live Auction Cockpit (LAC) and I can´t find it.
Could anyone help me where I can find this doc. or how I can generate it via the SolMan.
Thank you very much for you response.
Regards
Axel

Hi,
You can use previous LAC 2.0 instguide.
service.sap.com/instguides -> mySAP Business Suite Apps -> mySAP SRM -> SRM 5.0 -> Installation Guide: Live Auction Cockpit 2.0
Regards,
Marcin Gajewski
Please reward points for helpful answer

Problem syncronizing R/3 and SRM Add-on configuration

We have got ECC6 with SRM 5.5 as add-on.
Running the synchronization cockpit I can create message in the SMQ2 inbound queue. The message are not processed due to a missing SLD (system landscape Directory). Should I create such an SLD to allow the processing of the inbound packets?
Do I need J2EE installed to create this SLD?
Maybe exist a workaround to crete these messages without installing the J2EE and activating the SLD ?
Thank you
Aldo.

Thanks for the feedback.
PLease, coul dyou indicate me some Oss documentation to certify the scenario 1) ?
Please could you tell me where is , if you know it, the Configuration Guide for SRM 5.5 Add-on ?
We are not able to find it and we do not have the Solution manager.
Regards

Help on Business Scenario Configuration Guide for SRM Server 5.5

hai friends
where can i get Business Scenario Configuration Guide.for Version SRM server 5.5
i found for 4.0 and 5.0 but not for 5.5 Please let me know the link of market place
thanks
Regards
Krishna

Hi Krishna,
You can find all configuration guides at http://service.sap.com/ibc. For SRM server 5.5 (SRM5.0), the configuration guide has to be downloaded from Solution Manager.
Solution Manager is must for all new version implementations now.
Regards,
Prashant
Do reward points for helpful answers

Loyalty Management Best Practise Configuration Guide

Dear all,
we set up Loyalty Management in our Demo-System (CRM 7.0 Level5) as it is described in the SAP CRM Marketing book.
Unfortunately we still have problems with:
- sales order integration
- execution of membership activities
Does anybody has a Best Pracise Configuration Guide for Loyalty Management, I can use as an additional guide beneath the SAP Marketing book to solve these issues and to check all system settings and the customizing?

Language                                                  German
English (Master)
Compare versions               SSCR         Download
In case, the page does not refresh automatically within 10 seconds
after finishing with correction activity,
please use the REFRESH button!
Refresh
Content:                                   Summary                  |                   Header Data                  |                   Validity                  |                   Attachments
I know this is a late post but will help other users who search.
Note - 1331970.
Symptom
Loyalty functionality in sales order
Solution
Please read the documentation below Setup for Integration of Sales Order with Loyalty for CRM 7.0 You can use this note to integrate the loyalty application with sales order to allow customers to earn reward points on purchase of products, redeem points and buy point products. To enable the above-mentioned functionality, the following set up has to be carried out in the system: -> Product master data You have to add SetType REWARD_PRO_LOY (created for product type Material) to the product category. You may create a new product category for loyalty products. You can add the settype to a product category using the following steps: 1. Use transaction COMM_HIERARCHY
2. Search for the category to be used for loyalty products
3. In the SetTypes tab under Category Data, add REWARD_PRO_LOY as the settype After the settype is added to the loyalty product category, it will appear as point information assignment block in the product overview page. Here, you can maintain point information for Accrual, Redemption and Buy Points scenarios. You have to select the Scenario, Point Type (Points, Miles etc) and enter the associated number of points. The following three activities are supported: -> Accrual
In this scenario, a customer buys standard products and earns reward points for his purchase. The actual points to be accrued will be maintained at product master data level. You have to select EARN as the loyalty scenario. Example: We have a product, Laptop T 61, which has 1000 reward points associated with it, at the product master level. If a customer buys this product a member activity will be created and 1000 points will be credited to his account. Note: You can maintain points for a product with a particular loyalty scenario in the point information assignment block of product overview page. -> Redemption
In this scenario, a customer redeems his points to buy products. In CRM 7.0, redemption products have 100% discount and can be bought only by points. The point value of such products will be maintained at product master data level in point information assignment block. You have to select REDEEM as the loyalty scenario. Example: We have a keyboard HT-1010, which has a price of 5000 points (and 100% discount). If a customer buys this product, a member activity will be created and 5000 points will be deducted from the customer's account. -> Buy Points
This functionality enables a customer to purchase points. The point value of such products will be maintained at product master data level under the point Information assignment block. You have to select BUYPOINTS as the loyalty scenario. Note:
Point information is maintained for 1 base unit of product .If the quantity and unit of measure are changed, the points will be calculated accordingly.
-> Customizing in SPRO You have maintained the following customizing settings in SPRO:
-> In the customizing activity Define Point Types for Sales-Order Integration, you maintain point types. For more information, see SAP Customizing Implementation guide   Customer Relationship Management Marketing Loyalty Management - Design Channel Integration Define Point Types for Sales-Order Integration Point Information in product master can be maintained only for these point types.
-> In the customizing activity Define Categories and Types for Sales Order Integration, you maintain member activity category, activity type, sales order status for which activity will be created and the processing delay ( Process On Hold) for a particular loyalty scenario. For more information, see SAP Customizing Implementation guide Customer Relationship Management Marketing Loyalty Management - Execution Member Activities Define Categories and Types for Sales Order Integration
-> In the customizing activity Define Transaction Types, you maintain the transaction types for accrual, redemption and buy points. For more information, see SAP Customizing Implementation guide Customer Relationship Management Transactions Basic Settings Define Transaction Types Note:
Reference transaction types LTAA, LTAR and LTAB are delivered for CRM IC and UIU. For web channel, transaction types ISLA, ISLR and ISLB are delivered. You can create new transaction types on project basis but transaction classification should be maintained as A, R and B for accrual, redemption and buy points transactions respectively. For redemption transaction LTAR, the item category is LTAR where the pricing process is maintained as 100% discount. Therefore, the net value will always be 0 for redemption items and only points will be charged. You have to maintain the condition 0R10 in pricing procedure. The pricing procedure 0CRM01 contains the details of condition 0R10. If you do not maintain 100% discount, then additional currency price will be displayed. For example, $200 + 100 MILES. Billing and delivery related customizing has to be done on a project basis. ----------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------- Setup for Integration of Sales Order with Loyalty in EhPx for CRM 7.0 You can use this note to integrate the loyalty application with sales order to allow customers to earn reward points on purchase of products, redeem points and buy point products. To enable the above-mentioned functionality, the following set up has to be carried out in the system: -> Product master data You have to add SetType REWARD_PRO_LOY (created for product type Material) to the product category. You may create a new product category for loyalty products. You can add the SetType to a product category using the following steps: 1. Use transaction COMM_HIERARCHY
2. Search for the category to be used for loyalty products
3. In the SetTypes tab under Category Data, add REWARD_PRO_LOY as the SetType After the SetType is added to the loyalty product category, it will appear as point information assignment block in the product overview page. Here, you can maintain point information for Accrual, Redemption and Buy Points scenarios. You have to select the Scenario, Point Type (Points, Miles etc) and enter the associated number of points. The following three activities are supported: -> Accrual
In this scenario, a customer buys standard products and earns reward points for his purchase. The actual points to be accrued will be maintained at product master data level. You have to select EARN as the loyalty scenario. Example: We have a product, Laptop T 61, which has 1000 reward points associated with it, at the product master level. If a customer buys this product a member activity will be created and 1000 points will be credited to his account. Note: You can maintain points for a product with a particular loyalty scenario in the point information assignment block of product overview page. This is an optional activity. In many cases, the points accrued will not be maintained in the product master data but will be determined based on reward rules. In such cases, you do not have to maintain the SetType. -> Buy Points
This functionality enables a customer to purchase points. The point value of such products will be maintained at product master data level under the point Information assignment block. You have to select BUYPOINTS as the loyalty scenario. This activity is mandatory for Buy Points scenario. -> Redemption
In this scenario, a customer redeems his points to buy products. In CRM 7.0, redemption products have 100% discount and can be bought only by points. The point value of such products will be maintained at product master data level in point information assignment block. You have to select REDEEM as the loyalty scenario. Example: We have a keyboard HT-1010, which has a price of 5000 points (and 100% discount). If a customer buys this product, a member activity will be created and 5000 points will be deducted from the customer's account. Note:
Point information is maintained for 1 base unit of product .If the quantity and unit of measure are changed, the points will be calculated accordingly. Redemption functionality in Ehp1 for CRM 7.0 In case of redemption, you have three payment options to choose from. You choose the payment option in the customizing activity Define Mixed Payment for Sales Order Integration. For more information, see SAP Customizing Implementation guide   Customer Relationship Management Marketing   Loyalty Management Channel Integration Define Mixed Payment for Sales Order Integration a) Fixed redemption value from Product Master
The point information will be picked from the SetType as explained above and 100% discount will be given at item category level. Attached is the screenshot of the same. Using Pricing Process, you can select whether normal pricing is executed or 100% discount is given. In addition to the above-mentioned setting, a 100% discount condition should be included in the pricing procedure. For this purpose, you can use the standard condition 0R10 in the pricing procedure. b) Mixed redemption using Conditions and IPC With Ehp1 for CRM 7.0, mixed payment functionality is available. This enables a consumer to pay with points and money in a single sales transaction. You can maintain point prices as conditions in product master data under the Prices assignment block. The condition type
0LM1 with condition tables SAP002, 003 and 004 are used to maintain these point conditions as seen in the screenshot below. Select the option '0LM1_LM_SAP002' from the dropdown. Select 0LM1_LM_SAP002 from the dropdown. In the above screenshot, Price in Points = 100% point price , Max Price in Points = maximum points a consumer can spend, Min Price in Points = minimum points a consumer should spend for this product. Note:
In the above scenario, entries in Point Information assignment block will not be considered for redemption but the information will be picked from the conditions. A new usage LM is developed for points as conditions. You can use the customizing activity Condition Technique: Basics to develop condition tables, access sequences, condition types and point procedures.
For more information, see SAP Customizing Implementation guide   Customer Relationship Management Master Data Conditions and Condition Technique Condition Technique: Basics You can create condition objects with application CRM and usage LM. The point procedure 0LM001 is delivered and can be used in a sales transaction using the below the customizing Determine Point Procedures. Point information will be fetched by executing this procedure. For more information, see SAP Customizing Implementation guide   Customer Relationship Management Marketing Loyalty Management Channel Integration Determine Point Procedures You can assign this point procedure to a particular sales org, distribution channel, division, customer pricing procedure and document pricing procedure the same way it is done with pricing procedure. If you decide to use only points in a sales transaction (consumer has to pay 100% point price always), a standard pricing procedure with 100% discount would suffice. If you want to allow mixed pricing, for example, a consumer can pay anything between 1000 to 2000 points and rest in currency, then condition type 2902 (point based discount) should be included in the pricing procedure and 100% discount should not be chosen at item category level as explained above. The conversion rate between points and currency can be maintained in CRM UI in the following manner:
1. Go to Loyalty Management
2. Select Prices
3. Choose 2900 as the Price Maintenance Group
Attached is the screenshot of the same. Here 1 USD is maintained as 1 point. Product specific conversion rates are also allowed. Condition type 2901 is the reference condition type for 2902 and 2903 (used in flexible order and is described later in the section flexible order). Scales can be maintained for the conversion rates. For example, for the first 1000 Points it is 0.5 USD per point. From 1000 to 2000 points, it is 0.75 USD per point and from 2000 points onwards, it is 1 USD per 1 Point Example of Sales order Here, a product TV-1000 is maintained with Point price as 1000 Miles and Min Point price as 500 miles and Max point as 1000 Miles. A consumer purchases this product using a redemption transaction and spends 500 points. With a conversion rate of 1 USD equal 1 point, the net value becomes 500 USD + 500 Miles. If consumer spends 1000 Miles, the net value will be 0 USD + 1000 miles. Similarly, various combinations of maximum price and minimum price can be maintained in Product master and accordingly consumer can use his points to redeem products. c) Mixed payment using Flexible order If you do not wish to maintain point prices for individual products due to high volume of products, specifically in retail, then they you select this option where during the checkout, consumer will be given the option to use his points. Discount will be given based on the points spent at an item level. In this case, the only thing you have to maintain is a fixed conversion rate (condition type 2901). The transaction type will be the same as accrual. For example, a consumer purchases a product HT-1000 on which he can earn 1000 special points. During checkout, he will be asked to use his points. Use Point Payment will be enabled, and he can enter points he wants to redeem. If he decides to use 500 points, then a discount will be given to him based on the points spent. Here, with a conversion rate of 1 USD equal to 1 point, 500 USD discount will be given and accrual information will be lost. Hence, the points spent will be equal to 500. Discount Based on Member Basic and Lifetime Tiers In accrual transactions, discounts can be given to members who have reached a particular tier (Basic and Lifetime tiers). This can be maintained as a condition using the following steps:
1. In CRM UI, go to Loyalty Management
2. Select Prices
3. Choose 29MD as the Price Maintenance Group
Here, we can maintain the percentage discount on a product for a particular basic and lifetime tier. The condition type 29MD should be included in the pricing procedure of sales transaction to provide discounts. In sales order processing, you can check the discount under the assignment block Price Totals on the overview page. In this case, a 2% discount is given based on the above condition as shown in the third row) Generation of Billing Documents Once a sales order is created and saved, you can generate a billing document as a follow up activity. For loyalty sales transactions, the following three new fields are added to the billing document.
-> Points
-> Point type
-> Points spent In Accrual and Buy Points scenarios, Points = Points accrued; Point type = Miles, points etc; Points spent = 0 In redemption scenarios, Points = Total point price; Point type = Miles, Points etc; Points spent = points spent by the consumer To generate billing document from a sales order, you have to select a relevant billing option for the item category. In this case, we have selected Transaction-Related Billing According to Order Quantity. The billing will happen via CRM Billing.
Note: Only CRM Billing is currently supported
As billing will happen only if the order is replicated successfully to ERP (where shipping, delivery and logistics will be done), you have to ensure that all the master data, for example, products, BP (sold to party), conditions, etc are present in ERP along with the transaction type and item category (for example, LTAA and LTAN). Once replication is complete, we can create a billing document from the sales order overview page. Select Create Follow-up and choose Billing. -> Customizing in SPRO You have maintained the following customizing settings in SPRO:
-> In the customizing activity Define Point Types for Sales-Order Integration, you maintain point types. For more information, see SAP Customizing Implementation guide   Customer Relationship Management Marketing   Loyalty Management Channel Integration   Define Point Types for Sales-Order Integration Point Information in product master can be maintained only for these point types.
-> In the customizing activity Define Categories and Types for Sales Order Integration, you maintain member activity category, activity type, sales order status for which activity will be created and the processing delay (Process On Hold) for a particular loyalty scenario. For more information, see SAP Customizing Implementation guide Customer Relationship Management Marketing Loyalty Management Member Activities Define Categories and Types for Sales Order Integration
-> In the customizing activity Define Transaction Types, you maintain the transaction types for accrual, redemption and buy points. For more information, see SAP Customizing Implementation guide Customer Relationship Management Transactions Basic Settings Define Transaction Types
Note:
Reference transaction types LTAA, LTAR and LTAB are delivered for CRM IC and UIU. For web channel, transaction types ISLA, ISLR and ISLB are delivered. You can create new transaction types on project basis but transaction classification should be maintained as A, R and B for accrual, redemption and buy points transactions respectively. For redemption transaction LTAR, the item category is LTAR where the pricing process is maintained as 100% discount. Therefore, the net value will always be 0 for redemption items and only points will be charged. You have to maintain the condition 0R10 in pricing procedure. The pricing procedure 0CRM01 contains the details of condition 0R10. If you do not maintain 100% discount, then additional currency price will be displayed. For example, $200 + 100 MILES. Billing and delivery related customizing has to be done on a project basis. -> In the customizing activity Assign Product Hierarchy for Sales Order Integration, you register the product hierarchy if it is not the same as sales operation hierarchy. For more information, see SAP Customizing Implementation guide Customer Relationship Management Marketing Loyalty Management Channel Integration Assign Product Hierarchy for Sales Order Integration This customizing will help you create reward rules based on product categories and process them during creation of member activity using sales order. -> In the customizing activity Determine Pricing Procedure, you maintain 29CRLM as the pricing procedure for loyalty transactions. For more information, see SAP Customizing Implementation guide Customer Relationship Management Marketing Business Functions Pricing Pricing in the Business Transaction Determine Pricing Procedure For more information please refer to the attachment and IMG Documentation.

Problems with generating the form

Hi there,
I'm trying to create an interactive form for print in ABAP. So, I created an interface and a form. I've generated the interface, it worked properly. So i've checked the syntax of the form, there was no error and i clicked the button to generate it. Although there's no error, it stays inactive, that's the first problem.
The second problem ist the menu-tree. Expanding the node of my inactive form, there's another node 'used interface' and under it appears another node with my inactive form. This funny behaviour doesn't stop, and i assume it's a GUI problem, but i'm not sure.
Do you have any ideas to solve my problems.
thanks a lot, greetings, Stefan

Hi Stefan
also, have a look at this post ADS: unable to activate a new adobe form where the issue was that the ADS is not even installed and configured. To go through all teh right steps, get the ADS Configuration Guide from the Service Marketplace at http://service.sap.com/adobe -> Media Library -> Documentation.
Best regards,
Markus

Urgent: Step by step configuration guide for workflow

Hi all,
Can anybody please proVide me complete step by step configuration guide for SRM 5.0 workflow.FULL POINTS WILL BE AWARDED FOR THE HELPFUL ANSWER..

hi,
<b>Check the below PDF file on Workflow:</b>
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
There is a good book from SAP Press that I would
recommend as a starting point.It's called Practical Workflow for SAP and it is by Alan Rickayzen.
http://www.sap-press.com/product.cfm?account=&product=H950
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
http://help.sap.com/saphelp_erp2005/helpdata/en/fb/135962457311d189440000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
http://help.sap.com/saphelp_bw33/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/8d/25f94b454311d189430000e829fbbd/content.htm
Go through the following:
1) Goto Tcode PFTC : Standard Task > Create Button>Workflow Templete
For Create Container
Element : ZBUS1001006
Name : ANy Name
Description
Data Type & Properties
Data Type:
select Object Type : BOR Object Type for BUS1001006
Properties:
Parameter Settingd : check all Import, Export & Mandatory Checkboxes
Basic Data :
Abbr : Create_View
Name : Some Name
Work Item Text : Create View Material & -
Click on DELE Button & Select Material From The List
Object Catagory : BOR Object Type
Object Type : BUS1001006
Method : View
Triggering Events
Obj Catagory Object Type Event
BOR Object BUS1001006 View
activate it
Enter on BUS1001006 Object Type you will get Quadratel<> Button after that
double click on Quadratel<> button you get green button
after that the system will generate the task No.
check in the Event linkage Tcode : SWETYPV
if you find an entry with your Workflow and linkage active
goto Tcode : SWEC click on New Entries
Change Doc Obje Obj Cat Obj Type Event on create
Material BOJ Obje BUS1001006 View Option Button(Checked)
save this
goto Tcode : SWEC
Change Doc Object : Material
Obj Catagoty : BOR Type
Obj Type : BUS1001006
Event : View
Check with On Create Button
Goto SWETYPV
Obj Catagoty : BOR Type
Obj Type : BUS1001006
Event : View
Receiver Type : Some Work Flow No: WS80000431 like this
Click on Work flow Builder
Cheers
Alfred

IS- Retail- problem while generating delivery in WF30

Hi Guys,
I do have problem while generating deliveries after adjusting the stocks to stores and external customers.
T.Code WF30- Merchandise Distribution for CD/FT process
Scenario :!from DC to Stores process (1)
I am getting an error called for stores is "*shipping Data not Found for item 10,20 and 30" (using one article and 3 stores)*
Another scenario :2 from DC to external Customer(2)
I am getting an error called "No deliveries are generated"
(using one article and 2 customer)
shipping point determination was done in OVL2,
Picking area determination has done with few settings( if anybody guides what and where all the settings to be checked) I given Storage conditions in Article MD, entered Sto loc in Storage loc Deter and condition at IMG>LE>Shipping>Picking
Is it problem in Allocation Table Item category level for second one ?
for both scenarios i am using Allocation Table Item category AAFA
In AAFA,(Alloc Item Cate) SD Type is ZZTA and delivery type is not maintined..(what are the entries should be in the Alloc Tab Item Cat).
but in ZZTA sales order doc type(v0v8) Delivery type is LF
Plz help on this..
regards
Harish

Hi guys,
I got the answer and i am closing this thread.
Harish

Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.

Hi,
Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.
In general it is no problem to generat SSRS reports, but an custom one i get issue with.
The Error:
An
error has occurred during report processing. (rsProcessingAborted)
Query
execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
ExecuteReader:
CommandText property has not been initialized

Hi SaiTech,
According to your description, when you render report on SCCM 2012 R2, you got the error message.
According to my knowledge, the issue can be caused by following reasons:
Select permission not granted to ConfigMgr reporting account. We need to open the SQL management console and open the properties dialog box of configmgr db, grant select and execute permission to ConfigMgr reporting account.
Reporting Services Web Service URL or Report Manager is false. Make sure Web Service URL and Report Manager URL are correct. Restart SMS_Executive service and reinstall Reporting Service Point, then please render the report again.
Report timeout. Increase query and report timeout.
If the problem remain unresolved, please provide detailed information of SRSRP.log (default location: %programfiles%\Microsoft and Configuration Manager\Logs) and reporting services error log(default location: %programfiles%\Microsoft SQL Server\<SQL
Server Instance>\Reporting Services\LogFiles), it will help us move more quickly toward a solution.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Problem in Hibernate 3.0. while configuring with Oracle 9i

Hi,
I have a problem in Hibernate 3.0. while configuring with Oracle 9i.
I make all necessary settings as per the requirement.
My code successfully running with MYSQL,
But if tried use Oracle 9i. then System generate the Following Exceptions.
Please let me know the solution
DEBUG - initializing class SessionFactoryObjectFactory
DEBUG - registered: 2c9834f115ccc9360115ccc937600000 (unnamed)
INFO - Not binding factory to JNDI, no JNDI name configured
DEBUG - instantiated session factory
INFO - Running hbm2ddl schema update
INFO - fetching database metadata
DEBUG - total checked-out connections: 0
DEBUG - using pooled JDBC connection, pool size: 0
ERROR - could not get database metadata
java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1],
[0], [], [], [], [], [], []

Hi
I alreay make all necessary chagens in cfg.file but still i have problem
see the contenet fo .cgf file
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE hibernate-configuration PUBLIC
"-//Hibernate/Hibernate Configuration DTD 3.0//EN"
"http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd">
<hibernate-configuration>
<session-factory>
<property name="hibernate.cglib.use_reflection_optimizer">true</property>
<property name="hibernate.connection.driver_class">oracle.jdbc.driver.OracleDriver</property>
<property name="hibernate.connection.url">jdbc:oracle:thin:@sinpunap049:1521:esgdb</property>
<property name="hibernate.connection.username">scott</property>
<property name="hibernate.connection.password">tiger</property>
<property name="connection.pool_size">1</property>
<property name="hibernate.dialect">org.hibernate.dialect.Oracle9Dialect</property>
<property name="show_sql">true</property>
<property name="hbm2ddl.auto">update</property>
<mapping resource="Student1.hbm.xml" />
</session-factory>
</hibernate-configuration>

No ''BS: SRM-Portal(Basic Configuration) V1'' in /NWA Deply and Change

Hi Expert
i want to integrate SRM7.0 with Portal,
Enviroment :
               SRM7.0 AS ABAP
               ERP 6.0SR3 AS ABAP/AS JAVA
               BP for SRM7.0 has installed
               SRM has been added into Trused System in Portal
and i follow InstGuide > "Guide for Automated Configuration: Connecting Portal Systems u201D
When i logon Portal with <hostname>:<port>/NWA
                and click    > Deploy and Change
there is no "BS: SRM-Portal(Basic Configuration) V1u201D exist
i dont know Why, whether because my NW7.0 patch 14 need to upgrade? Or other reason

Hi,
You can also configure portal connection manually. Please check the Configuration Guide in SAP Solution Manager or offline downloaded configuration guide in http://service.sap.com/srm-inst SAP SRM Server 7.0 -> Configuration Guide for SAP SRM 7.0 -> Business Package for SAP SRM 7.0.
You can also access SRM via NWBC html in current SRM 7.0 SP06 without Portal. It is called Portal-Independent Navigation Frame.
Regards,
Masa

Configuration Guide

Hi everybody,
i am looking for the Self-Service Procurement:
Configuration Guide for SRM 5.0. At the service marketplace I could only find the guide for SRM 4.0. Does anybody know where to get it?
Kind regards
AD

Hi Achim,
    Though what has been suggested by the guys is right
    that, you have to refer to Solution Manager for
    this.But why are you looking for SSP 5.0 Config
    Guide, because what ever the guide for 4.0 gives
    is enough for doing the configurations.Only a few
    changes have been made.Still you are having any
    doubt, please free to contact me.
Regards
Amitabh
    Please Don't forget reward points if ueful.

Configuration Guide for Time Management

Can anyone send me the configuration guide for Time Management

The following is the config. document of TM. check the threads u will get some more good responses and close the thread if u find the response is good enough
I think its helpful to u.
IMG  Personnel Time Management  Work Schedules  Define Public Holiday Classes
IMG  Personnel Time Management  Work Schedules  Personnel Subarea Groupings  Group Personnel Subareas for the Work Schedule
IMG  Personnel Time Management  Work Schedules  Personnel Subarea Groupings  Group Personnel Subareas for theDaily Work Schedule
IMG  Personnel Time Management  Work Schedules  Daily Work Schedules  Define Daily Work Schedules
IMG  Personnel Time Management  Work Schedules  Period Work Schedules  Define Period Work Schedules.
IMG  Personnel Time Management  Work Schedules  Day Types  Define Day Types.
IMG  Personnel Time Management  Work Schedules  Day Types  Define Day Types.
IMG  Personnel Time Management  Work Schedules  Day Types  Define Special Days.
IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Define Employee Subgroup Groupings
IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Define Groupings for the Public Holiday Calendar.
IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Set Work Schedule Rules and Work Schedules.
IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Generate Work Schedules Manually
IMG  Personnel Time Management  Work Schedules  Planned Working Time  Set Default Value for the Work Schedule.
IMG  Personnel Time Management  Work Schedules  Planned Working Time  Set Default Value for Time Management Status.
IMG  Personnel Time Management  Time Data Recording and Administration  Substitutions  Define Personnel Subareas for Substitution Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Substitutions  Set Defaults for Substitution Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Group Personnel Subareas for Attendances and Absences.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Define Absence Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Define Counting Classes for the Period Work Schedule.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Group Employee Subgroups for Time Quotas.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Group Personnel Subareas for Time Quotas
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Define Rules for Rounding Counted Absences
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Define Counting Rules
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Define Counting Rules  Deduction rules for Absence quotas
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Assign Counting Rules to Absence Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Attendances/Actual Working Times  Define Attendance Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Attendances/Actual Working Times  Attendance counting  Rules for Attendance counting (New)  Assign Counting Rules to Attendance Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Time Quota Types  Define Absence Quota Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Automatic Accrual of Absence Quotas  Permit Quota Generation Without Time Evaluation.
IMG  Personnel Time Management  Time Evaluation  Time Evaluation Settings  Set Personnel Subarea Groupings for Time Recording.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Rules for Generating Absence Quotas  Set Base Entitlements  Base Entitlement for Absence Quota Generation.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Rules for Generating Absence Quotas  Determine Validity and Deduction Periods.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Rules for Generating Absence Quotas  Set Base Entitlements  Define Generation Rules for Quota Selection.
Edited by: Sikindar on Feb 11, 2008 6:05 PM

Problem to generate SRM 7.0 configuration guide into solman

Similar Messages

Maybe you are looking for