Problem to run forms from URL

Hello all:
I need help to solve this problem, I great URL to run forms from browser , then I teak the URL and go to another machine. When I run the URL the browser closed and gives message to send report to Microsoft or not. I tray this again and the browser closed again and give the same message.
I teak the URL and make it as link to call forms java code ,then before the forms started the browser closed again and give the same message.
So please can anyone help me in this.
Thanks for anticipation.

hello Gerd Volberg :
thanks for replying, i use database and forms 10g Release 2 .the application server is oracle application server 10g Release 2 (10.1.2).
the url is
http://localhost:8889/forms/frmservlet?config=spewin&userid=hr/hr@orcl&form=E:\final_form\test.fmx&otherparams=USID=10070+COMID=5554442075
thanks

Similar Messages

What is the reason for this problem during run form

my dears:
usually when I Make run for the form from developer
the browser is empty and the url give me a strange addres like
http://127.0.0.1:3682/Dtq0XxtVRoMVFTRRJDKDT5Z6m36L6nEBQFtKCQhTlAk9ANr0
the correct url http://127.0.0.1:8889/forms/frmservlet
but I not know why this strange address
I make reset to defualt from preference
Iam use
oracle db10g
developer 10g R2
Windows xp
thanks in advance

hi there
when u run form in oracle 10g then u should run 0c4j first then u can run form in oracle 10g.
u can run form from oracle 10g after crtl+r
and also u can run darect from folowing path
http://127.0.0.1:8889/forms/frmservlet?form=formname.fmx
according above path u should paste fmx in following (just example)
d:\deve10g\form

Running form from Forms Builder with IE

Forms 11.1.1.4, IE 8, Windows 7 64-bit.
1. Running form from Forms Builder with IE results in Page cannot be displayed. My Java console doesn't even appear so it's not getting to the servlet part.
2. Running same form stand-alone in IE works fine. The URLs are identical (I've cut/pasted them)
3. Running same form from Forms Builder with Firefox works fine. The only change I made was to the runtime preference for the browser location.
Seems like this has to be something to do with the browser configuration that only occurs from Forms Builder. What could it be?

I'm not sure about the specifics of your configuration but I suspect the answer is in formsweb.cfg (and the associated .env file).
I think that generally the configuration that runs for formbuilder is the "default" whereas you could be specifying a different
one on the url not going through formbuilder. (but if you're using em then it's really hard to know what's going on since it seems
to not write changes back to the config and env files until it is stopped. This caused me many days of confusion until I figured it out and
that's why I would highly advise never using it to modify .config or env settings.)
check what jre is installed in ie (tools, manage addons, there is on my machine:
java 2 plugin ssv helper and JQSIEStartDetectorImpl browser helper object.
Not sure which one or both is necessary.
Have your url be a trusted site, unblock it from popup blockage, and most of all stare at your formsweb.cfg default section. It would help
if you specified what was in the url. do you have config=X in there?
Edited by: lake on Jul 23, 2011 12:21 PM

Can't run form from Form Builder 10g - Port configuration problem?

Hi,
I have installed the Database (10.2.0.1.0) and the Developer Suite (10.1.2.0.2) on two Linux machines (Red Hat Enterprise Linux ES 4 Basic).
If I enter the frmservlet-URL manually everything seems to be fine.
In one case I enter http://127.0.0.1:8890/forms/frmservlet, in the other http://127.0.0.1:8889/forms/frmservlet; in BOTH cases I get eventually a dark square and the status bar says "Applet oracle.forms.engine.Main started".
HOWEVER, if I create a simple form with Form Builder and click on the Button with the green traffic light ("Run Form"), the form runs only on the machine where frmservlet listens on port 8890.
On the other machine (frmservlet configured to listen on port 8889) Firefox pops up, the URL "http://127.0.0.1:32979/6dOrpwghCqnp8PhMT7KVT533m3IaArqFbPqPBOztZXWYSsNy" gets called, and nothing else happens. The screen displays the string "ORACLE FORMS." and the status bar says "Waiting for 127.0.0.1...", and it stays like this forever.
I assume this is a port configuration problem, but I don't have a clue where to start.
Any suggestions how I should proceed are greatly appreciated.
Thank you very much in advance!

Hi Frank,
Thank you for your reply.
I doublechecked my configuration.
In the dialog Edit --> Preferences --> Runtime the Application Server URL is set to "127.0.0.1:8889/forms/frmservlet".
However, when I attempt to run the form, the URL "http://127.0.0.1:33140/W2dwbV9eXS2fPkuKlxNhCxFWdEihwDviat2uV7ycrSotqwDN" gets called.
The screen displays the string "ORACLE FORMS." and the status bar says "Waiting for 127.0.0.1...", and that's it.
I wonder how the port number 33140 got selected. Interestingly, this time it is a different number; last time it was port 32979. In fact, the port number seems to change each time; I tried again and now it is 33189.
I will now try to set the port number for the frmservlet to 8890.
I choose Edit --> Preferences --> Runtime and set the application server URL to "127.0.0.1:8890/forms/frmservlet".
I stop the container, open /home/oracle/OraHome_1/j2ee/DevSuite/config/default-web-site.xml and change the port number to 8890:
<?xml version="1.0" standalone='yes'?>
<!DOCTYPE web-site PUBLIC "Oracle Application Server 10g XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">



<web-site port="8890" protocol="http"
display-name="Oracle Developer Suite 10g instance of Oracle Containers for J2EE Web Site">

     
     
     <default-web-app application="default" name="defaultWebApp" root="/j2ee" />

<web-app application="forms" name="formsweb" root="/forms" />


<web-app application ="reports" name="web" root="/reports" />
<web-app application = "reports" name="demo" root="/repdemo" />
     
     <access-log path="../log/default-web-access.log" />
</web-site>
I restart the container, start Form Builder, connect to the database, and open my test form.
When attempting to run the form, the URL "http://127.0.0.1:33437/Pl0n3ky9vmU5z37A7ScBnQhsGwq3jwuzJpgTAKWPMOYIzT8K" gets called (again a new port number, apparently picked radomly within a certain range) and nothing happens: "Waiting for 127.0.0.1...".
However, when I enter the URL http://127.0.0.1:8890/forms/frmservlet I do (eventually, after confirming that I trust the certificate etc.) get a darc rectangle and the status message "Applet oracle.forms.engine.Main started", which tells me that my setup can't be that far off target.
Here is the output of netstat:
[root@localhost ~]# netstat -anp --tcp
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:32769 0.0.0.0:* LISTEN 2779/rpc.statd
tcp 0 0 0.0.0.0:23910 0.0.0.0:* LISTEN 5269/java
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 2759/portmap
tcp 0 0 0.0.0.0:1521 0.0.0.0:* LISTEN 4265/tnslsnr
tcp 0 0 0.0.0.0:113 0.0.0.0:* LISTEN 2983/xinetd
tcp 0 0 127.0.0.1:7830 0.0.0.0:* LISTEN 4429/spamd --port 7
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 2928/cupsd
tcp 0 0 0.0.0.0:9240 0.0.0.0:* LISTEN 5269/java
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 3002/sendmail: acce
tcp 0 0 0.0.0.0:8890 0.0.0.0:* LISTEN 5269/java
tcp 0 0 0.0.0.0:32795 0.0.0.0:* LISTEN 4231/ora_d000_orcl
tcp 0 0 127.0.0.1:1521 127.0.0.1:32817 ESTABLISHED 4265/tnslsnr
tcp 0 0 127.0.0.1:32817 127.0.0.1:1521 ESTABLISHED 4209/ora_pmon_orcl
tcp 0 0 127.0.0.1:33425 127.0.0.1:1521 ESTABLISHED 5298/frmbld
tcp 0 0 127.0.0.1:1521 127.0.0.1:33425 ESTABLISHED 5311/oracleorcl
tcp 1 0 80.133.127.83:33485 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33484 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33494 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33520 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 0 0 80.133.127.83:33529 209.132.177.100:443 ESTABLISHED 4060/python
tcp 0 0 80.133.127.83:33528 209.132.177.100:443 ESTABLISHED 4060/python
tcp 1 0 80.133.127.83:33460 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33470 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 0 0 :::22 :::* LISTEN 2968/sshd
tcp 0 0 ::ffff:127.0.0.1:33437 :::* LISTEN 5298/frmbld
tcp 697 0 ::ffff:127.0.0.1:33437 ::ffff:127.0.0.1:33439 CLOSE_WAIT -
tcp 348 0 ::ffff:127.0.0.1:33437 ::ffff:127.0.0.1:33440 CLOSE_WAIT -
[root@localhost ~]#
The question remains: Where do those port numbers come from?
Regards,
jme

Problem in running report from forms 6i..........!

hi all,
I am working in oracle forms 6i and i am trying to run report from
form while press one of the push-button. works fine upto 2nd line from the
begin key-word.After that its showing error like " FRM-40738:Argument 1 to builtin
REPORT_OBJECT_STATUS cannot be null.". Can any-one help me of how to solve this and
wat would be the problem.........?
declare
     run_rep varchar2(200);
     rep_obj report_object;
     rep_stat varchar2(20);
begin
     rep_obj := find_report_object('report46');
     run_rep := run_report_object(rep_obj);
     rep_stat := report_object_status(run_rep);
     if rep_stat = 'FINISHED' then
     copy_report_object_output(run_rep, 'C:\Documents and Settings\trainee\Desktop\Icons\test.pdf');
     else
          message('error when running report');
     end if;
end;
Please help asup!
regards,
jame

hi rosario,
Thanks for ur reply. My requirement is, I want to generate pdf file from the report output. so i wrote the following code which is taken from d2k documentation. Problem area has been highlighted in bold.
declare
run_rep varchar2(200);
rep_obj report_object;
rep_stat varchar2(20);
begin
rep_obj := find_report_object('report46');
run_rep := run_report_object(rep_obj);
rep_stat := report_object_status(run_rep);
if rep_stat = 'FINISHED' then
copy_report_object_output(run_rep, 'C:\Documents and Settings\trainee\Desktop\Icons\test.pdf');
else
message('error when running report');
end if;
end;
Report is running but while coming to report_object_status. complior shows error like "FRM-40738:Argument 1 to builtin REPORT_OBJECT_STATUS cannot be null". Parameter for report_object_status is null, i dont know y it is null because report is running. If report is running means,then there must be some values in run_rep.
why complior doesnt find the values from run_rep.......???
regards,
jame

Problems when generating forms from Module Generator

I am trying to generate a form from a module in Module Generator. The form is generating OK, but when design editor tries to show the form in the browser it doesn't work.
This is the URL it is trying to use:
http://127.0.0.1:8888/forms90/f90servlet/?form=/\MANAGE_ACCOUNTS&userid=adam/xxxxxxx@oraserve
When I run a form from Form Builder, I get something like this:
http://127.0.0.1:8888/forms90/f90servlet?form=C:\Temp\Dev\WOOL_MAIN.fmx&userid=ADAM/xxxxxx@oraserve&buffer_records=NO&debug_messages=NO&array=YES&query_only=NO&quiet=NO&RENDER=YES
My server based URL is:
http://127.0.0.1:8888/forms90/f90servlet
I'm trying to set the generator preferences but just can't seem to get it right :(
can anyone help?
thx
adam

Try the following solutions :
1) Check on in IE -> Tools -> Internet Options -> advanced -> allow active content to run in files on My Co
mputer
2) Make sure that you have in the Internet Explorer Tools -> Internet Options -> Advanced tab -> Check the check box
Enable third party Browser extensions. It will be under browsing.

Problem to run forms 9i demos

I have just install forms 9i demos.But when i trying to launch start html page(http://localhost:8888/forms90demo/demo90.html) it return me an error: server not found.
Could it do others settings to run forms 9i demos?
Thanks for your answers.

Hi Frank,
I start OC4J instance.But it is the same problem which occurs when i enter both url:http://localhost:8888/ and http://localhost:8888/forms90demo/f90servlet.It returns me this error: server not found.
Thank for your help.
TYAG.

Oracle Report Font problem when run report from oracle EBS R12

Dear All
I have developed one Report in ORACLE REPORT BUILDER in windows environment. I see the output of that report, its ok, I deployed it on the EBS R12 which is on Linux environment, when i see the output, its fonts totally change and due to change in fonts, output not same as like in previous stage. When i print from dot matrix Printer then sometime its shrink the character and sometime break the output..
Kindly help me in this regard, because this problem i am facing from last few days.
i am waiting for your quick response.
Thanks in advance....
Regards,
Nawaz
Edited by: Haq Nawaz on Nov 5, 2012 11:45 AM

Thank you very much for your reply
I have changed the fonts in the report, but when i run it from the EBS its has the same problem. from the EBS output font look like as (COURIER) rather than CALIBRI WESTERN.
tell me what i have to change anything.

I am having problems to run Safari from my iPhone 5

Dear all,
I'm having problems to run Safari App from my Iphone 5. The application can't be opened and don't initiate.

Yes, I have restarted the IPhone almost four times, and nothing. Then I've restored and then set up the Iphone from the begginnig and Safari seems to work, but 24 hours later, the same problem.
I'll appreciate a solution! Thanks!!
C.

Run form from form builder

Hi,
I am using Form 6i and copied Forms60Libraries in my local machine. I am developing form which will be registered with oracle apps. Now I want to run this form locally instead of uploading into server everytime while testing which I don't have access depending on other for this move.
So, Please guide me to run this form from Form Builder locally if there is a way.
Thanks in advance.

As Alex suggested, you will need local copies of all the required Apps resource files (*.pll, *.plx, etc). Running an Apps form from the Forms Builder does not require any special setup on your workstation beyond this. However, even with all the required resource files you will run into errors each time your form calls one of the standard apps built-ins. It has been a while since I've worked with Apps, but I was able to get around the calls to these built-ins by checking if the Form was running on the web or client/server and only calling the Apps built-in if running on the web. It was a bit of a pain to setup, but it was worth being able to test my form localling from the Forms Builder rather than upload the form to the server in order to test the runtime. Here is how I accomplished this. In each trigger that calls an Apps built-in (eg: APP_STANDARD.Event) do the following. Typically, I only needed to add the following code the Form level triggers, but it depended on each form.
/* Example When-New-Form-Instance */
DECLARE
   UI_type   VARCHAR2(15) := Get_Application_Property(USER_INTERFACE);
BEGIN
   IF ( UI_type = 'WEB' ) THEN
      -- Execute Apps built-ins...
      APP_STANDARD.EVENT('WHEN-NEW-FORM-INSTANCE');
   END IF;
   -- Perform the rest of your processing here
END;Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.
Edited by: CraigB on Dec 6, 2011 12:20 PM

How to run form from command prompt

Hi,
How to run a form from command prompt
can anybody suggest me the way
prasanth a.s.

Well, if you are running windows, client server forms 6i, and your form is called 'myform', you could put this into a batch file :-
start ifrun60 module=myform

PROBLEMS IN RUNNING FORM ON WEB

HELLO ALL
I AM DEPLOYING FORMS ON WEB. I AM USING FORM 5. I HAVE MANAGED
TO DEPLOY AND RUN FORM ON WEB, BUT I AM HAVING COUPLE OF
PROBLEMS AND QUESTIONS.
1. MY FORMS ARE RUNNING AS AN APPLET. HOW CAN I RUN IT WITHIN
BROWSER?
2. IF MY CANVAS IS BIGGER THEN BROWSER WINDOWS SIZE WILL SCROLL
BAR WORK?
3. WILL I BE ABLE TO USE CUSTOM MENU AND CALL OTHER FORMS?
4. HOW CAN I USE FORMS STANDARD FUNCTION KEYS (F7, F8 ETC.)?
THANKS

1. In your HTML startup file add <PARAM NAME="separateFrame"
VALUE="false">
4. Create a keyboard mapping (.res) file with function keys and
modify your startup HTML file, e.g.:
<PARAM NAME="serverArgs" VALUE="module=logon.fmx
term=c:\forms\mykeys.res>

Problem in running code from web service

All,
We are experiencing a problem while running a code from a web service. The code based on ecliselink. The same code works from JUnit. When running from webservice, we observed the the following warning
*0 WARN [[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'] openjpa.Runtime - The configuration property named "openjpa.Id" was not recognized and will be ignored, although the name closely matches a valid property called "openjpa.Id".*
*0 INFO [[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'] openjpa.Runtime - Starting BEA Kodo 4.2.0*
Does this mean it is picking kodo implementation? Our expectation is to use eclipselink implementation. What could this warning? Any pointers would be of great help.
Thanks,

Sounds like it is using Kodo, is anything from EclipseLink logged?
Have you configured your JPA provider in your persistence.xml? If you have not, then you will just get the default.
James : http://ww.eclipselink.org

Problem with running forms

Always when I try to run forms, I get message: "Error at opening file D:\developer\forms90\fmrCSw.res".Do you know what´s the problem? I tried reinstall form, but have same problem.I use Oracle 9.2.0.1.0 version. Thank you

What is your NLS_LANG setting?
Search for the missing file on the installation CD and copy it to where all the rest of the fmr*.res files are on your computer.

Running forms from DOS command prompt

how do u run forms (*.fmx) from the DOS command prompt?
TY in advance

hi,
In Developer 10g, you can not run the form in client/server mode. Your case is a form of client/server mode operation.
To run froms in Oracle 10g, your must run on the web, that is, you must have http server installed.
If you have successfully installed Oracle Developer Suite 10g, it has automatically installed and configured a working http server.
all you have to do is to modify some config files in <devsuitehome>/forms90/server directory folder namely:
1. default.env where you add your path for your library files as in of your library files
(*.pll)
2. formsweb.cfg where set the workingDirectory parameter to point to the location
of your forms (*.fmx) files.
You have also to install Jinitiator by executing the file <devsuitehome>/jinit/jinit.exe.
Start your OC4J instance
then you can run the form from form builder.
regards,
Mike

Problem to run forms from URL

Similar Messages

Maybe you are looking for