Problem using 'Set-WSManInstance'

Hello!
I'm quite new in WinRM and WS-Management Protocol.
Acutally I'm trying to make some changes on Linux-Resources on a System (CentOS 6.4) that runs openwsman (in a virtual machine).
The following command works fine:
get-wsmaninstance -resourceuri http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/CIM_IPProtocolEndpoint
-enumerate -authentication basic -connectionuri http://192.168.50.154:5985/wsman
-credential "root" -dialect http://schemas.microsoft.com/wbem/wsman/1/WQL
-filter "Select * from CIM_IPProtocolEndpoint where ElementName = 'IPv4_eth1'"
The Response is the following:
n1 : http://sblim.sf.net/wbem/wscim/1/cim-schema/2/Linux_IPProtocolEndpoint
xsi : http://www.w3.org/2001/XMLSchema-instance
lang :
Address : Address
AddressOrigin : 0
AddressType : AddressType
BroadcastResetSupported : BroadcastResetSupported
Caption : Protocol Endpoint for IP (Internet Protocol)
CommunicationStatus : CommunicationStatus
CreationClassName : Linux_IPProtocolEndpoint
Description : A communication point to send and receive data. This class is dedicated to link IP intefaces
to Logical Networks.
DetailedStatus : DetailedStatus
ElementName : IPv4_eth1
EnabledDefault : 2
EnabledState : 2
Generation : Generation
HealthState : HealthState
IPVersionSupport : 1
IPv4Address : 192.168.50.154
IPv6Address : NULL
IPv6AddressType : IPv6AddressType
IPv6SubnetPrefixLength : IPv6SubnetPrefixLength
InstallDate : InstallDate
InstanceID : InstanceID
Name : IPv4_eth1
NameFormat : IP
OperatingStatus : OperatingStatus
OtherEnabledState : NULL
OtherTypeDescription : NULL
PrefixLength : PrefixLength
PrimaryStatus : PrimaryStatus
ProtocolIFType : 4096
ProtocolType : 2
RequestedState : 2
Status : OK
SubnetMask : 255.255.255.0
SystemCreationClassName : Linux_ComputerSystem
SystemName : localhost.localdomain
TimeOfLastStateChange : TimeOfLastStateChange
TransitioningToState : 12
The Problem appears at, e.g. changing the IP-Address.
I've tried it this way (with CIM_IPProtocolEndpoint and Linux_IPProtocolEndpoint -> same result):
set-wsmaninstance http://sblim.sf.net/wbem/wscim/1/cim-schema/2/Linux_IPProtocolEndpoint
-selectorset @{name="IPv4_eth1"} -authentication basic -connectionuri http://192.168.50.154:5985/wsman
-credential "root" -valueset @{IPv4Address="192.168.50.153"}
Here's the error message:
Set-WSManInstance : Der WS-Verwaltungsdienst kann die Anforderung nicht verarbeiten, weil die Anforderung nicht alle er
forderlichen Selektoren enthält.
Bei Zeile:1 Zeichen:18
+ set-wsmaninstance <<<< http://sblim.sf.net/wbem/wscim/1/cim-schema/2/Linux_IPProtocolEndpoint -selectorset @{name="I
Pv4_eth1"} -authentication basic -connectionuri http://192.168.50.154:5985/wsman -credential "root" -valueset @{IPv4Add
ress="192.168.50.153"}
+ CategoryInfo : NotSpecified: (:) [Set-WSManInstance], COMException
+ FullyQualifiedErrorId : System.Runtime.InteropServices.COMException,Microsoft.WSMan.Management.SetWSManInstanceC
ommand
Well, I know it is german, but it actually says that WS-Managementservice can't handle this request, because the request does not support all needed Selectors.
I've already read all the Documentation and tried almost each syntax of this command but can't find the Problem.
Can anyone help me?
Thanks!

Clearly your Linux system doesn't support your request. This is not a PowerShell issue. Post issue in Linux OpenMgmt forum for help.
¯\_(ツ)_/¯

Similar Messages

Problem using Setting Focus

Hello there, can you help me on how to use the set Focus.
For instance I have a 3 JTextField, when I run it, the focus is on the first textField, what I want is that, when I pressed the enter key on the keyBoard, the focus will be on the 2nd textField, and when I pressed again the enter key, the focus will be on the 3rd textField and so on.
can you give me a sample code on this one, thanks.

the last post in this thread might give you some ideas
http://forum.java.sun.com/thread.jspa?threadID=713697&tstart=0
note: will only work if the textfields follow each other in the focus traversal policy

Problem with SET GET parameters

Hi all,
I am facing a problem using SET and GET parameters.
There is a Z transaction(Dialog program) where some fields of screen are having parameter ID's. That transaction is designed to diaplay/change status of only one inspection lot at a time.
Now I need to call that transaction in a loop using BDC. I mean i need to update the status of multiple inspection lots(one after the other). Before calling the transaction I am using
SET PARAMETER ID 'QLS' FIELD lv_prueflos.
Unfortunately the transaction is only changing the first inspection lot. When I debugged I found that the screen field is changing in PAI. Even though in PBO it shows the next value, when it goes to PAI it is automatically changing to the first value(inspection lot).
Example: Inspection Lots : 4100000234
4100000235
4100000236
Now first time when the call transaction is being made the status of insp lot 4100000234 is changed. For the second time when insp lot 4100000235 is being passed in PBO ican see this. But the moment it enters PAI the screen field changes to 4100000234.
Could you pls help me in solving this issue.
Thanks,
Aravind

Hi,
Problem with SET GET parameters
Regarding on your query. Follow this below link.
It will help you.
Re: Problem with Set parameter ID
Re: Problem in Set parameter ID
I Hope it will helps to you.
Regards,
Sekhar

Problems using window.close() and setting fields

Hi,
I have two problems:
First one is:
I created a simple JSP with 'Save' and 'Exit' Buttons. In the Exit button on click event I invoked a function closeWindow, which calls teh window.close(). But on clicking Exit, the window does not close. Can anyone please tell me why.
Second one is:
The JSP also needs to get loaded with some values in the Textfields. Theses values are extracted from a text field using a Java class. I am able to see that these values are extracted from the text file and are loaded into Java vars, but when I am trying to set this value into a text field, it is NOT getting set.
(filePathDetails is the instance of the class that extracts the text values)
The entire code is posted below:
<%@ page language="java" import="ftpScheduler.*" contentType="text/html; charset=ISO-8859-1" pageEncoding="ISO-8859-1"%>
<% FolderPathInfo filePathDetails = new FolderPathInfo(); %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>PATH DETAILS</title>
    <SCRIPT type="text/javascript">
     function setPaths(){
          with(document.pathDetails){
               textAncPath1.value = <%=filePathDetails.localDirPath1 %>;
               textAncPath2.value = <%=filePathDetails.localDirPath2 %>;
               textArchivePath.value = <%=filePathDetails.archiveDirPath %>;
               textLogPath.value = <%=filePathDetails.logFilePath %>;
     function closeWindow(){
          window.closeWindow();
    </SCRIPT>
</head>
<body bgcolor="#c0c0c0" onload="setPaths()">
     <FORM name="pathDetails" method="get" action="DetailsServlet.java">
     <FONT face="Arial" size="3"><STRONG>Directory Paths:</STRONG></FONT>
     <BR><BR>
     <TABLE border="0" cellspacing="" height="60" width="450"
                                                  style="FONT-SIZE: 10pt; FONT-FAMILY: Arial" align="center">
     <COLGROUP>
     <COL width="45%">
     <COL width="55%">
     </COLGROUP>
     <TR>
     <TD><LABEL>Ancillary Transmit Path1 :</LABEL></TD>
     <TD><INPUT type="text" name="textAncPath1" width="290" maxlength="350"/></TD>
     </TR>
     <TR>
     <TD><LABEL>Ancillary Transmit Path2 :</LABEL></TD>
     <TD><INPUT type="text" name="textAncPath2" width="290" maxlength="350"/></TD>
     </TR>
     <TR>
     <TD><LABEL>Archive Path :</LABEL></TD>
     <TD><INPUT type="text" name="textArchivePath" width="290" maxlength="350"/></TD>
     </TR>
     <TR>
     <TD><LABEL>Log File Path :</LABEL></TD>
     <TD><INPUT type="text" name="textLogPath" width="290" maxlength="350"/></TD>
     </TR>
     </TABLE>
     <P align="center">
          <INPUT type="submit" name="buttonSave" value="Save">
          <INPUT type="button" name="buttonExit" value=" Exit " onclick="closeWindow()">
          <BR>
     </P>
     </FORM>
</body>
</html>Please help me.
Thanks in advance.

Try the following..
For problem 1:
Use window.close() instead of window.closeWindow().
For the second problem
don't call the function setPaths() at onload. Rather
call the function after the page is loaded. You can
try like this.
If it doesn't work then check whether the browser is
giving any JavaScript error message.
<SCRIPT type="text/javascript">
setPaths() ;
     function setPaths(){
     alert(document.pathDetails.element[0].value);
document.pathDetails.element[0].value =
= <%=filePathDetails.localDirPath1 %>;
          alert(document.pathDetails.element[0].value);
          with(document.pathDetails){
textAncPath1.value =
e = <%=filePathDetails.localDirPath1 %>;
textAncPath2.value =
e = <%=filePathDetails.localDirPath2 %>;
textArchivePath.value =
e = <%=filePathDetails.archiveDirPath %>;
textLogPath.value = <%=filePathDetails.logFilePath
ath %>;
     function closeWindow(){
          window.closeWindow();
</SCRIPT>Hi,
Actually I did try window.close(), but I still am not able to close the current window.
And as for the problem of setting up the field values, sorry the given solution doesnt seem to work. :-(..
I have pasted the entire code, I dont know where teh flaw is. Please review the same and let me know.
Your help is very much appreciated.
<%@ page language="java" import="ftpScheduler.*" contentType="text/html; charset=ISO-8859-1" pageEncoding="ISO-8859-1"%>
<% FolderPathInfo filePathDetails = new FolderPathInfo();%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>PATH DETAILS</title>
     <SCRIPT type="text/javascript">
     function setPaths(){
          document.pathDetails.textAncPath1.value = "Anything";
          with(document.pathDetails){
               textAncPath1.value = <%=filePathDetails.localDirPath1%>;
               textAncPath2.value = <%=filePathDetails.localDirPath2%>;
               textArchivePath.value = <%=filePathDetails.archiveDirPath%>;
               textLogPath.value = <%=filePathDetails.logFilePath%>;
     function exitWindow(){
          window.close();
    </SCRIPT>
</head>
<body bgcolor="#c0c0c0">
     <FORM name="pathDetails" method="get" action="/FTPSchedulerApp/ftpScheduler/DetailsServlet.java">
     <FONT face="Arial" size="3"><STRONG>Directory Paths:</STRONG></FONT>
     <BR><BR>
     <TABLE name="tempTable" border="0" cellspacing="" height="60" width="450" style="FONT-SIZE: 10pt; FONT-FAMILY: Arial" align="center">
     <COLGROUP>
     <COL width="45%">
     <COL width="55%">
     </COLGROUP>
     <TR>
     <TD><LABEL>Ancillary Transmit Path1 :</LABEL></TD>
     <TD><INPUT type="text" name="textAncPath1" width="290" maxlength="350"/></TD>
     </TR>
     <TR>
     <TD><LABEL>Ancillary Transmit Path2 :</LABEL></TD>
     <TD><INPUT type="text" name="textAncPath2" width="290" maxlength="350"/></TD>
     </TR>
     <TR>
     <TD><LABEL>Archive Path :</LABEL></TD>
     <TD><INPUT type="text" name="textArchivePath" width="290" maxlength="350"/></TD>
     </TR>
     <TR>
     <TD><LABEL>Log File Path :</LABEL></TD>
     <TD><INPUT type="text" name="textLogPath" width="290" maxlength="350"/></TD>
     </TR>
     </TABLE>
     <div align="center">
          <INPUT type="submit" name="buttonSave" value="Save"/>
          <input type="reset" name="buttonReset" value="Reset" onclick="setPaths()"/>
          <button name="buttonExit" onclick="exitWindow()"> Exit </button>
          <BR>
     </div>
     </FORM>
</body>
</html>

Problems using version set in Elements 9

Hi!
I have problems using the version set. When saving files in the Element 9 editor I can not mark the "version set" option, its not highlighted and not possible to mark or use. Is there a basic setting that I´m missing or??? I have the MAC version of Elements.
Also I have noticed that when I have edited a file in the Elements 9 editor and I come back to the Organizer the editor have changed the time of the photo? This means that its rather difficult to find the photo in the Organiser. It often change the time 1 or 2 hours.
As I cant use the version set I can not keep my tags on the edited pictures. Is there a setting for keeping the tags and catalogue belongings to a edited file?
As of today this software makes no sense to me and I can basically not keep working with it as it does not support basic functionality that I´m dependent on.
Best Re
A

I’m not seeing this in my own version sets in PSE9; when I expand the set every image has the same date and time under each thumbnail.
I’m wondering if you have used the “save for web” command at some point, which
wipes all EXIF metadata, including the date & time of the original - in order to optimize the image for display on the internet. So if you have imported such an image Elements has to make an estimate. Apart from this known scenario I can’t really explain what’s going on.

Problem While Using SET PF-STATUS

Hi friends,
Here im doing a ALV interactive report , in which two buttons are placed DISPLAY and CHANGE by using SET PF-STATUS ,when ever the user select a record on output and clicks on those button it ill navigate to corresponding transaction, all works fine but here im using Customised application toolbar in which im placing Two Customised Buttons(DISPLAY,CHANGE),standard functions like SORT,PRINT,SEARCH,TOTAL,SUBTOTAL... in the STATUS defined for my program.
The problem is when Bulk data there in output TOTALSigma) not working and displays a message and another one is SUBTOTAL icon to be displayed after total is done in standard reports but here with Total icon the Subtotal icon is displaying in output.
i need to get the SUBTOTAL icon only after the TOTAL is done,
One Solution for this is we can Copy the Staus of Standard program into our customised Status in SE41 tcode, but im not able to get any Status of STANDARD program along with my Customised icons(DISPLAY and CHANGE)..
i hope i information provoded for the issue is enough to resolve the problem
if not let met know for further clarifications needed.
Regards,
Niranjan. G

Hi Niranjan,
First copy standard status using program SAPLKKBL and status STANDARD_FULLSCREEN into your customized program and add your two buttons and code accordingly. It works.
Regards
Venkat

Problem using the FederatedSearch / Result set empty

Hello,<br>
<br>
I've the following problem using the FederatedSearch:<br>
In my KM-Folder I've two documents.<br>
I created a simple search AbstractPortalComponent to search in the special KM-Folder.<br>
If the query is "*" I will get the right number of documents.<br>
But If I will access them the iterator is empty...<br>
Please see the code below:<br>
<br>
Best regards<br>
Klaus<br>
<br>
<br>
IIndexService indexService = (IIndexService) ResourceFactory.getInstance().getServiceFactory().getService(IServiceTypesConst.INDEX_SERVICE);<br>
<br>
SearchQueryListBuilder sqb = new SearchQueryListBuilder();<br>
<br>
sqb.setSearchTerm(query);<br>
IQueryEntryList qel = sqb.buildSearchQueryList();<br>
RidList ridList = new RidList(); <br>
ridList.add(RID.getRID(OR_KM_ROOT_PATH + "/" + OR_KM_CURRENT_PATH));<br>
ridList.add(RID.getRID(OR_KM_ROOT_PATH + "/" + OR_KM_ARCHIVE_PATH));<br>
IResourceContext resourceContext = new ResourceContext(user);<br>
IFederatedSearch federatedSearch = (IFederatedSearch) indexService.getObjectInstance(IWcmIndexConst.FEDERATED_SEARCH_INSTANCE);<br>
IFederatedSearch search = (IFederatedSearch) indexService.getObjectInstance(IWcmIndexConst.FEDERATED_SEARCH_INSTANCE);<br>
ISearchSession session = federatedSearch.searchWithSession(qel, ridList, resourceContext, null, null);<br>
response.write("-"+session.getTotalNumberResultKeys()); ### writes 2-ok-<br>
response.write("- "+session.getNumberResultKeys()); ### writes 2-ok-<br>
ISearchResultList sresults = session.getSearchResults(1,session.getTotalNumberResultKeys());<br>
               <br>
ISearchResultListIterator iter = sresults.listIterator();<br>
response.write("> "iter.hasNext()"<br>");          ### writes "false"!???
<br>
while (iter.hasNext())<br>
{<br>
...<br>
}<br>

The plan is to be running with more than just two sites (though at the moment I am testing with only two).
What happens is a client comes on-line and requests a list of sites from a router. It then picks one of the sites from the list and adds that as a replication site in the repmgr.
It then goes about opening up the database and doing some other bookeeping. Finally we start the replication manager and once the NEWMASTER event is recieved a sync is done.
So while this DELAYCLIENT/rep_sync is a bit overkill for the two-site test I am doing now, the design I am working towards will be a multi-site setup.

IPhone - Problems while setting Delegate to UISearchBar using IB

Hi,
I'm having a problem while setting the delegate to the UISearchBar.
SearchViewController.h
#import <UIKit/UIKit.h>
@interface SearchViewController : UIViewController {
IBOutlet UISearchBar *mSearchBar;
@property (nonatomic, retain) UISearchBar *mSearchBar;
@end
FirstViewController.m
#import "SearchViewController.h"
@implementation SearchViewController
@synthesize mSearchBar;
// The designated initializer. Override to perform setup that is required before the view is loaded.
- (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil {
[super initWithNibName:nibNameOrNil bundle:nibBundleOrNil];
return self;
@end
I think I have setup the connection properly in IB, the view connected to the File's Owner, the File's Owner referencing the SearchViewController class. Now if I run it like this it all works great but when I set the UISearchBar delegate to File's Owner I get.
Application Specific Information:
iPhone Simulator 2.2 (77.4.9), iPhone OS 2.2 (5G77)
* Terminating app due to uncaught exception 'NSUnknownKeyException', reason: '[<UIViewController 0x524790> setValue:forUndefinedKey:]: this class is not key value coding-compliant for the key mSearchBar.

Found the solution:
Reference:
http://discussions.apple.com/thread.jspa?messageID=8550459

Memory Problem with SEt and GET parameter

hi,
I m doing exits. I have one exit for importing and another one for changing parameter.
SET PARAMETER exit code is ....
*data:v_nba like eban-bsart,
       v_nbc like eban-bsart,
       v_nbo like eban-bsart.
       v_nbc = 'CAPX'.
       v_nbo = 'OPEX'.
       v_nba = 'OVH'.
if im_data_new-werks is initial.
if im_data_new-knttp is initial.
    if im_data_new-bsart = 'NBC' or im_data_new-bsart = 'SERC' or im_data_new-bsart = 'SERI'
       or im_data_new-bsart = 'SER' or im_data_new-bsart = 'SERM' or im_data_new-bsart = 'NBI'.
      set parameter id 'ZC1' field v_nbc.
    elseif im_data_new-bsart = 'NBO' or im_data_new-bsart = 'NBM' or im_data_new-bsart = 'SERO'.
      set parameter id 'ZC2' field v_nbo.
    elseif im_data_new-bsart = 'NBA' or im_data_new-bsart = 'SERA'.
      set parameter id 'ZC3' field v_nba.
    endif.
endif.
endif. *
and GET PARAMETER CODE IS....
get parameter id 'ZC1' field c_fmderive-fund.
get parameter id 'ZC2' field c_fmderive-fund.
get parameter id 'ZC3' field c_fmderive-fund.
FREE MEMORY ID 'ZC1'.
FREE MEMORY ID 'ZC2'.
   FREE MEMORY ID 'ZC3'.
In this code i m facing memory problem.
It is not refreshing the memory every time.
So plz give me proper solution.
Its urgent.
Thanks
Ranveer

Hi,
   I suppose you are trying to store some particular value in memory in one program and then retieve it in another.
If so try using EXPORT data TO MEMORY ID 'ZC1'. and IMPORT data FROM MEMORY ID 'ZC1'.
To use SET PARAMETER/GET PARAMETER the specified parameter name should be in table TPARA. Which I don't think is there in your case.
Sample Code :
Data declarations for the function codes to be transferred
DATA : v_first TYPE syucomm,
       v_second TYPE syucomm.
CONSTANTS : c_memid TYPE char10 VALUE 'ZCCBPR1'.
Move the function codes to the program varaibles
v_first = gv_bdt_fcode.
v_second = sy-ucomm.
Export the function codes to Memory ID
EXPORT v_first
       v_second TO MEMORY ID c_memid.        "ZCCBPR1 --- Here you are sending the values to memory
Then retrieve it.
Retrieve the function codes from the Memory ID
IMPORT v_first TO v_fcode_1
         v_second TO v_fcode_2
FROM MEMORY ID c_memid.                                   "ZCCBPR1
FREE MEMORY ID c_memid.                                   "ZCCBPR1
After reading the values from memory ID free them your problem should be solved.
Thanks
Barada
Edited by: Baradakanta Swain on May 27, 2008 10:20 AM

Problem using File sharing in a small office network

I have a problem using File sharing on an Imac and Macbook Pro.
My office has a small network running Windows Small office file server 2003. I have one Windows 2000 PC connected to it and 3 Macs, an 2.4 gHz Intel iMac running Leopard 10.5.6 , a MBP running the same and a Mac Mini running 10.5.
From the Finder Shared window of the Mac Mini, I can see all the computers on the network. It also used to be the case for the iMac, but the MBP could never see the Windows PC’s, not the server or the Win2000. This wasn’t a big problem as I was communicating between the Macs and using the shared printer on the iMac.
On Monday Jan 19 the iMac was suddenly unavailable to the other 2 Macs. It was working normally on the Friday. The iMac can access the Mac Mini and copy files to it. The Mac Mini can see the iMac but cannot access it. Even trying to connect as, ends in a failed connection. I have tried rebooting, turning File sharing off and then on again to no avail.
The iMac now also cannot see the Windows PC’s which it previously could.
To get files from the MBP for printing, I now copy it to the Mac Mini and acces the folder from the iMac, a very tedious procedure. I don’t know why this happened and am scared that the Mac Mini is going to do the same thing.
All three computers are also running VMware 2.0 with Windows XP pro, and from VMware the server is visible on all the computers.
Any help will be much appreciated, I live in a small town in South Africa and the local computer suppliers have no knowledge of the Macs.
I think that the problem with the iMac may have started after a software upgrade to 10.5.6 but I am not entirely sure.
Thank you
ajdk

Well, you're current method sounds pretty good. But if you want to user a file server, hey go ahead.
What you want to do when you centralize project files is to keep track of which one is the newest and becareful not to overwrite files with the same name. So you either have to set up individual spaces on the server (separate AFP/FTP folders maybe), or you'll need to run a file checkout service.
The individual space is cheaper, but it's not much of a difference from backing up to the network drive. Since you have Gigabit connections, you might even opt to save ALL the user files on the server instead of just the project files.
If you want to run a file checkout service, there's two approaches. You can run a service that can host any kind of file, or you can run a version control system for each kind of application (Photoshop, Word, etc.). Please notice, that as you read further and further along, the methods become more and more expensive and complicated. Once you get to this point, it will be necessary to purchase or build software in addition to the Mac OS X Server package.

Problem using integrated WLS in jDeveloper 11.1.2.1.0

Hey there,
I got a problem using the integrated WLS from the jDeveloper 11.1.2.1.0.
After trying to deploy an ADF Web Application on the integrated WLS, I get the following log message:
LOG
+[Waiting for the domain to finish building...]+
+[11:26:04 AM] Creating Integrated Weblogic domain...+
+[11:28:13 AM] Extending Integrated Weblogic domain...+
+[11:30:06 AM] Integrated Weblogic domain processing completed successfully.+
*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
+/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/bin/startWebLogic.sh+
+[waiting for the server to complete its initialization...]+
+.+
+.+
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
+.+
WLS Start Mode=Development
+.+
CLASSPATH=/home/robin/bin/wls/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/home/robin/bin/wls/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/patch_oepe100/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/jdk160_29/lib/tools.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic_sp.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic.jar:/home/robin/bin/wls/modules/features/weblogic.server.modules_12.1.1.0.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/webservices.jar:/home/robin/bin/wls/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/robin/bin/wls/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/robin/bin/wls/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/home/robin/bin/wls/wlserver_12.1/common/derby/lib/derbyclient.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/xqrl.jar
+.+
PATH=/home/robin/bin/wls/wlserver_12.1/server/bin:/home/robin/bin/wls/modules/org.apache.ant_1.7.1/bin:/home/robin/bin/wls/jdk160_29/jre/bin:/home/robin/bin/wls/jdk160_29/bin:/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/games/bin
+.+
+* To start WebLogic Server, use a username and   *+
+* password assigned to an admin-level user. For *+
+* server administration, use the WebLogic Server *+
+* console at http://hostname:port/console        *+
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
Starting WLS with line:
+/home/robin/bin/wls/jdk160_29/bin/java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic.policy -Djavax.net.ssl.trustStore=/tmp/trustStore7618453572230021232.jks -Dhttp.proxyHost=emea-proxy.uk.oracle.com -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=localhost|localhost.localdomain|127.0.0.1|::1|MUELLER-BADY-GENTOO|MUELLER-BADY-GENTOO -Dhttps.proxyHost=emea-proxy.uk.oracle.com -Dhttps.proxyPort=80 -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -Djava.endorsed.dirs=/home/robin/bin/wls/jdk160_29/jre/lib/endorsed:/home/robin/bin/wls/wlserver_12.1/endorsed -da -Dplatform.home=/home/robin/bin/wls/wlserver_12.1 -Dwls.home=/home/robin/bin/wls/wlserver_12.1/server -Dweblogic.home=/home/robin/bin/wls/wlserver_12.1/server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=/home/robin/bin/wls/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain -Djrockit.optfile=/home/robin/bin/wls/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/servers/DefaultServer -Doracle.domain.config.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig -Digf.arisidbeans.carmlloc=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/carml -Digf.arisidstack.home=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/servers/DefaultServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/home/robin/bin/wls/oracle_common/modules/oracle.ossoiap_11.1.1,/home/robin/bin/wls/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/oracle/store/gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/robin/bin/wls/patch_wls1211/profiles/default/sysext_manifest_classpath:/home/robin/bin/wls/patch_oepe100/profiles/default/sysext_manifest_classpath:/home/robin/bin/wls/patch_ocp371/profiles/default/sysext_manifest_classpath weblogic.Server+
+<Feb 10, 2012 11:30:09 AM CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>+
+<Feb 10, 2012 11:30:10 AM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>+
+<Feb 10, 2012 11:30:11 AM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsystems Inc..>+
+<Feb 10, 2012 11:30:12 AM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491 >+
+<Feb 10, 2012 11:30:15 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>+
+<Feb 10, 2012 11:30:15 AM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>+
+<Feb 10, 2012 11:30:15 AM CET> <Notice> <Log Management> <BEA-170019> <The server log file /home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log is opened. All server side log events will be written to this file.>+
Feb 10, 2012 11:30:24 AM oracle.security.jps.internal.keystore.file.FileKeyStoreManager saveKeyStore
WARNING: Failed to save farm keystore. Reason {0}
Feb 10, 2012 11:30:24 AM oracle.security.jps.internal.keystore.file.FileKeyStoreManager createKeyStore
WARNING: Failed to save farm keystore. Reason {0}
oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06513: Failed to save farm keystore. Reason
+     at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.createKeyStore(FileKeyStoreManager.java:309)+
+     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:95)+
+     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)+
+     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)+
+     at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)+
+     at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:64)+
+     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)+
+     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)+
+     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)+
+     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)+
+     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)+
+     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:850)+
+     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)+
+     at java.security.AccessController.doPrivileged(Native Method)+
+     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)+
+     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)+
+     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)+
+     at java.lang.Class.newInstance0(Class.java:355)+
+     at java.lang.Class.newInstance(Class.java:308)+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)+
+     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)+
+     at weblogic.security.SecurityService.start(SecurityService.java:148)+
+     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)+
+     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)+
+<Feb 10, 2012 11:30:24 AM CET> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider>+
+<Feb 10, 2012 11:30:24 AM CET> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)+
+     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)+
+     at weblogic.security.SecurityService.start(SecurityService.java:148)+
+     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+     Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:293)+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)+
+     Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:899)+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+     Truncated. see log file for complete stacktrace+
+Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!+
+     at java.security.AccessController.doPrivileged(Native Method)+
+     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+     Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!+
+     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:860)+
+     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)+
+     at java.security.AccessController.doPrivileged(Native Method)+
+     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+     Truncated. see log file for complete stacktrace+
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06513: Failed to save farm keystore. Reason
+     at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.createKeyStore(FileKeyStoreManager.java:309)+
+     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:95)+
+     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)+
+     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)+
+     at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)+
+     Truncated. see log file for complete stacktrace+
+>+
+<Feb 10, 2012 11:30:24 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>+
+<Feb 10, 2012 11:30:24 AM CET> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>+
+<Feb 10, 2012 11:30:24 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>+
Process exited.
*/LOG*
After that, I tried setting permissions for the cwallet.sso file to ugo+rwx, but this leads to the same problems as mentioned above.
My second try was to setup an external WLS 12c, but it seems to be not yet possible to connect to a WLS 12c from within jDeveloper.
Do you have any ideas ?
Thank you in advance for your help.
Regards,
Robin

After debugging the WLS Initialisation with jdb, I recognized that there was some trouble with dependent libraries.
In the end, I solved my problem by using another OS (Ubuntu 11.10) for development. There, the WLS works out of the box, even with 64-Bit libraries.
Thank you for your help.
Regards,
Robin

Button in Bex Analyser 7.0 - problem with setting up Static Parameters

Hello,
I know a similar problem has been discussed here already, but I am still having problems with setting up Static Parameters of my Button in BEx Analyser 7.0, so that I can pass Variable values from that button to my query.
This is what I do - in Static Parameters of my Button I set the following values:
Name                          Index          Value
DATA_PROVIDER        0               DP_1
CMD                             0               PROCESS_VARIABLES
SUBCMD                      0               VAR_SUBMIT
VAR_NAME                 0               0RMA_FIP
VAR_VALUE               0               004/2010
As a result, I would like the value 004/2010 to be passed to variable 0RMA_FIP (which is mandatory) and the query to be executed with that value. For some reason, however, the value is not passed correctly, and instead the variable is filled with a blank or not filled at all, and I am getting a message "Specifiy value for variable Fiscal year/period". What do I do wrong?
Just to give you a broader picture - I would like to later use this logic to pass more than one variables into a query, including a hierarchy node, and read the values from an Excel worksheet - however, after many attempts to do so, I started playing with just one variable to figure out what the problem was.
I have already seen the following two threads and SAP notes on passing variable values from the button:
Re: Button in BEx Analyzer 7.0
Re: How to set variables values via VBA.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
Can anyone please advise?
Cheers,
AL

I managed to figure it out myself!
Instead of VAR_VALUE I need to enter VAR_VALUE_EXT, and it works fine.
I will mark this thread as "answered".

Could not complete the command because of a problem using the Adobe Color Engine

Hi all
This bizarrely started this morning - completely out of the blue - and I've no idea why.
Setup: Mac 10.8.2 / Creative Suite Premium PhotoShop CS5 extended (patched to 12.04)
Am working on images exported from LightRoom 4 (16bit A3 Pro Photo RGB PSDs) in PhotoShop CS5.
As part of my image grading process I have a PhotoShop Action that does the following: copy layer to new document (document respects all of copied layer settings) > Image > Adjustments > HDR toning > apply a certain HDR preset > copy to resultant image back to original doc > set opacity as 40%.
Totally out of the blue, after having this action for about 2 months, this morning I start getting a warning dialog of "Could not complete the command because of a problem using the Adobe Color Engine" and the action fails. The failure seems to take place at the 'make document' part of the action and seems to somehow be related to the contents of the clipboard.
I've tried trashing and re-creating the action. It works first time out fine and then - on the next image - errors again.
At present I can only safely carry out the work 'manually' by completing all the actions myself.
I can think of no settings that have changed and the OS hasn't been updated in a while.
I have found one other thread on a similar problem in PhotoShop Elements, but no definitive solution.
Any help appreciated as I have a shedload of stuff to process.
Best wishes
TP

OK: trash of prefs didn't work. Tried thrice. Re-created orig action. same problem.
BUT!
Your 'Image > Duplicate' suggestion does seem to work. If I use that in a new action as the method for creating the HDR version doc (instead of 'Select > Copy > New > Paste), it seems to work.
Will try that out this afternoon, but for now: WIN!
Many thanks for the suggestion!
TP

Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

Hello!
I have problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no OS preinstalled.
I do the following:
1. Install Windows 7 x64, SP1.
2. Install LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE&partNumber=PSK30E-02T002B3&serialNumber=&USER_ACTION=Serial%20number])
3. Install all Windows Updates from Microsoft
4. Run Toshiba Software Installer for Win 7 - it installs a couple of drivers and then asks to reboot.
Here is the log file for the first try (win7update.log):
Update started 12\28\2011 at 21:11
Installed TVALZ_O.INF
Installed IO & Memory Access Driver
driver_bluetooth_TC00241200A.exe /s /log /test has been installed with the result code of PASS
util_tvap_TC00215000H.exe /s /log /test /wait15 has been installed with the result code of PASS
Update completed at 21:29
After reboot I run it again and the result is:
Update started 12\28\2011 at 21:38
Toshiba Bluetooth stack has already been installed.
Toshiba Value Added Package has already been installed.
Update completed at 21:40
Any help is appreciated!
Thanks in advance!

You are right this notebook model was delivered without OS.
Win7 64bit is supported for this notebook model and all necessary drivers, tools and utilities are available on Toshiba download page.
What I can say is that all this stuff must be installed in right install order. I know it sounds stupid now but I recommend you to make clean OS again and continue installation following this installation order:
Win7 SP1
Intel Chipset SW Installation Utility 9.2.0.1015
TOSHIBA Supervisor Password Utility 4.8.6.0
TOSHIBA HW Setup Utility 4.8.6.0
TOSHIBA Bulletin Board V2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Management Engine Interface 7.0.2.1164
NVIDIA Display Driver 8.17.12.6669
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Value Added Package 1.5.4.64
USB3.0 Driver 2.0.32.0
NVIDIA HD Audio Driver 1.1.13.1
Conexant Audio Driver 8.51.1.0a
Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
or
Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
or
Realtek Wireless LAN Driver 2.00.0013
TOSHIBA Wireless LAN Indicator 1.0.3
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA Software Modem 2.2.97(SM2297ALS05)
Conexant Modem Driver 7.80.4.53
TOSHIBA HDD Protection 2.2.1.12
Atheros Bluetooth Filter Driver Package v1.0.7
Bluetooth Stack for Windows by Toshiba v8.00.04(T)
Atheros LAN Driver 1.0.0.46
Realtek Card Reader 1.0.0.12
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition V3.1.8
TOSHIBA eco Utility 1.2.25.64
Intel Proset 14.0.2.0.1.s64_wCAT
Intel Wireless Display 2.0.29T
TOSHIBA HDD_SSD Alert 3.1.64.7
TOSHIBA Service Station V2.1.52
TOSHIBA PC Health Monitor 1.7.4.64
ConfigFree 8.0.37
TOSHIBA Web Camera Application V2.0.0.19
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
PatchFiles$$2 PCIIDEREG-1.2
PatchFiles$$3 TosVolRegulator_x64_1.1
It is very important to use right installation order.
Please post some feedback.

Problem with setting Source Level in Sun Studio 2

I've got problem with setting Source Level to 1.5 in Sun Studio 2. When I try to set it to 1.5 in Project properties and click Ok everything seem to go well, but when I open Project Properties again Source Level is set to 1.4. I need this to work cause I started to lear Java recently and I want to use foreach loop.
Please help

I'm just citing an example using Date().
In fact, whether I use DateFormat or Calendar, it shows the same result.
When I set the date to 1 Jan 1950 0 hours 0 minutes 0 seconds,
jdk1.4.2 will always return me 1 Jan 1950 0 hours 10 minutes 0 seconds.
It works correctly under jdk1.3.1

Problem using 'Set-WSManInstance'

Similar Messages

Maybe you are looking for