Problem using tools

I notice if I leave photoshop on for a while I'll start having a small problem when
I decide to go back to the window.
I go to use a tool like the gradient tool or paint bucket tool and the icon is stuck as a hand when I try to use the tool.
All it does is grab the canvas and shifts the position when I'm trying to actually use the tool on the layer I've selected. The layer isn't locked.
What causes this and how do I prevent it?

John Joslin wrote:
Tap the Space Bar a few times and blow out the debris!
Wish we could blow out the world's problems as easily
Cheers!

Similar Messages

Problems using tools in toolbars

I have problems using many of the tools in toolbars. I simply can't click on them to use them, they are "dead".
I recently installed Indesign and have had this problem from the start. (Windows 7 64 bit)

See http://forums.adobe.com/message/4109757#4109757

Problem using tools illustrator cs6

Hi, could someone help me fix an issue regarding the tools displaying on illustrator cs6, evaluation version ? I cannot access the full panels of the sub tools : for instance, rectangle and double clic should display, ellipse, star, polygons etc. But the double clic makes nothing. I have the photoshop evaluation version which functions quite good, and whereby the sunrooms can be displayed. Any help or suggestion more than welcome !
Thanks,
Natacha

Hi Jacob,
...So simple I couldn't even give it a thought !
Many thanks for your fast and efficient reply.
Best regards,
Natacha

Problem using PSE9 Brush Tool!

I am experiencing a problem using the PSE9 Brush Tool. The color does produced by the brush not match the color of the sample picked by the Eyedropper Tool, Painting near the area where the sample was picked-up results in a much darker color.

Check the blend modes for the brush tool in the tool options bar.
Also if your painting on a blank layer check the blend modes in the layers panel.
Either way try the Normal mode.
MTSTUNER

Z68a-GD65 (G3) Problems Using USB Bootable Tool 1.25g

I am having problems using the USB Bootable Tool 1.25g with the P77, P80, and P82 BIOS's. I have tried both modes 1 and 2. Both modes copy over everything successfully. When booting using the bootable USB drive, after copying the BIOS file via mode 1, the tool flashes a screen very quickly, then says BIOS updated successfully. This is not true, however, because nothing has been updated. I see something rapidly go 1-2-3-4-5, but the progress indicator I was familiar with with the old version of the USB Bootable tool does not show up, where the BIOS file was being copied block by block and took some time.
Mode 2 doesn't work either. I get the message "ROMFILE ROMID is not compatible with existing BIOS". This happened with all three BIOS's, using mode 2. I have tried the "Fix my USB Key" option, and have tried clearing the CMOS as described in the instructions on the forum. As a test, I used the M-Flash in the BIOS and was able to flash to P80. P80 is giving me problems with an Intel Management Mode HECI error which disappears when I start the PC, as well as me being unable to raise the base clock speed--even though it shows as raised in the BIOS and it saves the setting. I am now stuck with P80. Now I cannot flash to any other BIOS using the M-Flash utility, as it doesn't find the BIOS file I manually copied over to the drive. The USB bootable tool will not work.

I did use mode 1, although since I was having trouble, I used mode 2 also, after reading troubleshooting instructions for the USB BIOS tool. The archives I used were all ones I downloaded from the Beta BIOS thread I posted above.
The problems I was having with P80 were actually because I unknowingly was using the N20 BIOS because somehow my BIOS reverted to that. I have no idea how that happened, aside from that possibly being the failsafe BIOS as part of the dual bios system. Above, I meant to say that I flashed the BIOS through Windows when I had success with the P80 BIOS. The M-Flash utility does not read the BIOS files which are available on this forum.

Problem using integrated WLS in jDeveloper 11.1.2.1.0

Hey there,
I got a problem using the integrated WLS from the jDeveloper 11.1.2.1.0.
After trying to deploy an ADF Web Application on the integrated WLS, I get the following log message:
LOG
+[Waiting for the domain to finish building...]+
+[11:26:04 AM] Creating Integrated Weblogic domain...+
+[11:28:13 AM] Extending Integrated Weblogic domain...+
+[11:30:06 AM] Integrated Weblogic domain processing completed successfully.+
*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
+/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/bin/startWebLogic.sh+
+[waiting for the server to complete its initialization...]+
+.+
+.+
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
+.+
WLS Start Mode=Development
+.+
CLASSPATH=/home/robin/bin/wls/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/home/robin/bin/wls/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/patch_oepe100/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/jdk160_29/lib/tools.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic_sp.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic.jar:/home/robin/bin/wls/modules/features/weblogic.server.modules_12.1.1.0.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/webservices.jar:/home/robin/bin/wls/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/robin/bin/wls/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/robin/bin/wls/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/home/robin/bin/wls/wlserver_12.1/common/derby/lib/derbyclient.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/xqrl.jar
+.+
PATH=/home/robin/bin/wls/wlserver_12.1/server/bin:/home/robin/bin/wls/modules/org.apache.ant_1.7.1/bin:/home/robin/bin/wls/jdk160_29/jre/bin:/home/robin/bin/wls/jdk160_29/bin:/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/games/bin
+.+
+* To start WebLogic Server, use a username and   *+
+* password assigned to an admin-level user. For *+
+* server administration, use the WebLogic Server *+
+* console at http://hostname:port/console        *+
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
Starting WLS with line:
+/home/robin/bin/wls/jdk160_29/bin/java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic.policy -Djavax.net.ssl.trustStore=/tmp/trustStore7618453572230021232.jks -Dhttp.proxyHost=emea-proxy.uk.oracle.com -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=localhost|localhost.localdomain|127.0.0.1|::1|MUELLER-BADY-GENTOO|MUELLER-BADY-GENTOO -Dhttps.proxyHost=emea-proxy.uk.oracle.com -Dhttps.proxyPort=80 -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -Djava.endorsed.dirs=/home/robin/bin/wls/jdk160_29/jre/lib/endorsed:/home/robin/bin/wls/wlserver_12.1/endorsed -da -Dplatform.home=/home/robin/bin/wls/wlserver_12.1 -Dwls.home=/home/robin/bin/wls/wlserver_12.1/server -Dweblogic.home=/home/robin/bin/wls/wlserver_12.1/server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=/home/robin/bin/wls/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain -Djrockit.optfile=/home/robin/bin/wls/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/servers/DefaultServer -Doracle.domain.config.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig -Digf.arisidbeans.carmlloc=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/carml -Digf.arisidstack.home=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/servers/DefaultServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/home/robin/bin/wls/oracle_common/modules/oracle.ossoiap_11.1.1,/home/robin/bin/wls/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/oracle/store/gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/robin/bin/wls/patch_wls1211/profiles/default/sysext_manifest_classpath:/home/robin/bin/wls/patch_oepe100/profiles/default/sysext_manifest_classpath:/home/robin/bin/wls/patch_ocp371/profiles/default/sysext_manifest_classpath weblogic.Server+
+<Feb 10, 2012 11:30:09 AM CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>+
+<Feb 10, 2012 11:30:10 AM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>+
+<Feb 10, 2012 11:30:11 AM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsystems Inc..>+
+<Feb 10, 2012 11:30:12 AM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491 >+
+<Feb 10, 2012 11:30:15 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>+
+<Feb 10, 2012 11:30:15 AM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>+
+<Feb 10, 2012 11:30:15 AM CET> <Notice> <Log Management> <BEA-170019> <The server log file /home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log is opened. All server side log events will be written to this file.>+
Feb 10, 2012 11:30:24 AM oracle.security.jps.internal.keystore.file.FileKeyStoreManager saveKeyStore
WARNING: Failed to save farm keystore. Reason {0}
Feb 10, 2012 11:30:24 AM oracle.security.jps.internal.keystore.file.FileKeyStoreManager createKeyStore
WARNING: Failed to save farm keystore. Reason {0}
oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06513: Failed to save farm keystore. Reason
+     at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.createKeyStore(FileKeyStoreManager.java:309)+
+     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:95)+
+     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)+
+     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)+
+     at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)+
+     at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:64)+
+     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)+
+     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)+
+     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)+
+     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)+
+     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)+
+     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:850)+
+     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)+
+     at java.security.AccessController.doPrivileged(Native Method)+
+     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)+
+     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)+
+     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)+
+     at java.lang.Class.newInstance0(Class.java:355)+
+     at java.lang.Class.newInstance(Class.java:308)+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)+
+     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)+
+     at weblogic.security.SecurityService.start(SecurityService.java:148)+
+     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)+
+     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)+
+<Feb 10, 2012 11:30:24 AM CET> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider>+
+<Feb 10, 2012 11:30:24 AM CET> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)+
+     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)+
+     at weblogic.security.SecurityService.start(SecurityService.java:148)+
+     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+     Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:293)+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)+
+     Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:899)+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+     Truncated. see log file for complete stacktrace+
+Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!+
+     at java.security.AccessController.doPrivileged(Native Method)+
+     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+     Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!+
+     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:860)+
+     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)+
+     at java.security.AccessController.doPrivileged(Native Method)+
+     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+     Truncated. see log file for complete stacktrace+
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06513: Failed to save farm keystore. Reason
+     at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.createKeyStore(FileKeyStoreManager.java:309)+
+     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:95)+
+     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)+
+     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)+
+     at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)+
+     Truncated. see log file for complete stacktrace+
+>+
+<Feb 10, 2012 11:30:24 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>+
+<Feb 10, 2012 11:30:24 AM CET> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>+
+<Feb 10, 2012 11:30:24 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>+
Process exited.
*/LOG*
After that, I tried setting permissions for the cwallet.sso file to ugo+rwx, but this leads to the same problems as mentioned above.
My second try was to setup an external WLS 12c, but it seems to be not yet possible to connect to a WLS 12c from within jDeveloper.
Do you have any ideas ?
Thank you in advance for your help.
Regards,
Robin

After debugging the WLS Initialisation with jdb, I recognized that there was some trouble with dependent libraries.
In the end, I solved my problem by using another OS (Ubuntu 11.10) for development. There, the WLS works out of the box, even with 64-Bit libraries.
Thank you for your help.
Regards,
Robin

Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

Hello!
I have problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no OS preinstalled.
I do the following:
1. Install Windows 7 x64, SP1.
2. Install LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE&partNumber=PSK30E-02T002B3&serialNumber=&USER_ACTION=Serial%20number])
3. Install all Windows Updates from Microsoft
4. Run Toshiba Software Installer for Win 7 - it installs a couple of drivers and then asks to reboot.
Here is the log file for the first try (win7update.log):
Update started 12\28\2011 at 21:11
Installed TVALZ_O.INF
Installed IO & Memory Access Driver
driver_bluetooth_TC00241200A.exe /s /log /test has been installed with the result code of PASS
util_tvap_TC00215000H.exe /s /log /test /wait15 has been installed with the result code of PASS
Update completed at 21:29
After reboot I run it again and the result is:
Update started 12\28\2011 at 21:38
Toshiba Bluetooth stack has already been installed.
Toshiba Value Added Package has already been installed.
Update completed at 21:40
Any help is appreciated!
Thanks in advance!

You are right this notebook model was delivered without OS.
Win7 64bit is supported for this notebook model and all necessary drivers, tools and utilities are available on Toshiba download page.
What I can say is that all this stuff must be installed in right install order. I know it sounds stupid now but I recommend you to make clean OS again and continue installation following this installation order:
Win7 SP1
Intel Chipset SW Installation Utility 9.2.0.1015
TOSHIBA Supervisor Password Utility 4.8.6.0
TOSHIBA HW Setup Utility 4.8.6.0
TOSHIBA Bulletin Board V2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Management Engine Interface 7.0.2.1164
NVIDIA Display Driver 8.17.12.6669
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Value Added Package 1.5.4.64
USB3.0 Driver 2.0.32.0
NVIDIA HD Audio Driver 1.1.13.1
Conexant Audio Driver 8.51.1.0a
Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
or
Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
or
Realtek Wireless LAN Driver 2.00.0013
TOSHIBA Wireless LAN Indicator 1.0.3
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA Software Modem 2.2.97(SM2297ALS05)
Conexant Modem Driver 7.80.4.53
TOSHIBA HDD Protection 2.2.1.12
Atheros Bluetooth Filter Driver Package v1.0.7
Bluetooth Stack for Windows by Toshiba v8.00.04(T)
Atheros LAN Driver 1.0.0.46
Realtek Card Reader 1.0.0.12
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition V3.1.8
TOSHIBA eco Utility 1.2.25.64
Intel Proset 14.0.2.0.1.s64_wCAT
Intel Wireless Display 2.0.29T
TOSHIBA HDD_SSD Alert 3.1.64.7
TOSHIBA Service Station V2.1.52
TOSHIBA PC Health Monitor 1.7.4.64
ConfigFree 8.0.37
TOSHIBA Web Camera Application V2.0.0.19
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
PatchFiles$$2 PCIIDEREG-1.2
PatchFiles$$3 TosVolRegulator_x64_1.1
It is very important to use right installation order.
Please post some feedback.

Problem using Export in Oracle 8.1.6.

Hi,
I have a problem using export utility in oracle 8i.
I got a message:
EXP-00056: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00000: Export terminated unsuccessfully
I tried running CATPROC.sql and CATEXP.sql but it did not correct the problem.
Please help me.
Thanks

You may want to try using the error lookup tool available here, http://otn.oracle.com/pls/tahiti/tahiti.homepage?remark=tahiti You may be able to find the answer even though the error lookup tools is for 8.1.7 version. Otherwise, you can search the db discussion forums to see if this issue has been discussed already.

Bug in xdb ease of use tools?

Hi,
I'm working with the XDB Ease of Use Tools for Structured Storage.
While executing the prvtxutil.plb file, I get the following error:
SQL> SHOW ERRORS;
Fehler bei PACKAGE BODY XDB.DBMS_XMLSTORAGE_MANAGE:
LINE/COL ERROR
2220/4   PL/SQL: Statement ignored
2220/15 PLS-00306: Falsche Anzahl oder Typen von Argumenten in Aufruf von
         'ISXMLTYPETABLE'
2322/4   PL/SQL: Statement ignored
2322/15 PLS-00306: Falsche Anzahl oder Typen von Argumenten in Aufruf von
         'ISXMLTYPETABLE'The file dbmsxutil.sql which I executed before ran without a problem. That´s annoying.....
The version of the prvtxutil.plb file which I have, was updated 25.01.2011, 10:34:56.
Has anyone the same problem or a solution for this?
Maybe it's a bug and someone has a previous version of the prvtxutil.plb which works and who can post it here....
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0      Production
TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
5 Zeilen ausgewählt.

Report any issue with the toolset on the official thread here: The "Offical" XDB Utilities thread. (via the FAQ XMLDB forum link on the mainpage)

Problems using Oracle Sql Developer

Hello.
I am tryng to use the developer but I have serious problems using it. Lags, freeze, blocked screens, fatal errors without messages that make me close the application.
It is running on Windows 2000.
Somebody have this problems too?
Is this tool operative or is in beta state?
Thanks a lot.
Miguel De Belliz.
Argentina.

I executed a query & need to cancel the operation. However the busy cursor won't let me click Cancel (X) icon. Why ?
Also from time to time a simple operation of copy / paste freezes the screen and eventually comes back to life after 4/5 minutes. Why ?
Platform : Windows
Version : WinXP2002SP2
SQL Dev Version : 1.0.0.13.43
Build : MAIN-13.43
Java : 1.5.0_05
Oracle IDE : 1.0.0
Regards

Problem using LIKE function

Hi Guyz,
I am having small problem using LIKE function . The problem is I am using LIKE function in the WHERE clause
to compare a column to a particular value, which gets this value from the front end. If the user has a single quote in the string he entered then the LIKE function is not working because of the single quote. Is there any way I can escape the single quote like we escape '%' and '_'.
Thankyou.

Mod_plsql supports bind variables, as do almost all front-end tools that deal with Oracle (and most other databases). I do not code mod pl/sql myself, but others here do, and I see bind variables in their code all the time (if I don't, they hear from me :-)).
If you pass a bind variable, the quote problem goes away. As far as I know (which is not very far), you should be able to take the string with the quote directly from your input field, bind it to the variable in your query and have no problems.
I suspect that the reson you are having issues is that you are just gluing strings together to create a sql statement. this is the wrong approach.
The java term for what you are looking for is prepared statement, I'm not sure what the equivalent is i mod plsql, but that should give you a start.
John

Problems using Oracle Directory

Hi all
I have the following problem using 9i: I would like to use oracle internet directory to register my db's. I am currently reading the online handbooks and found a section that says to start the directory by using the 'oidmon' and 'oidctl' commands. The problem is that I cannot find these tools anywhere on the server, altough i am pretty sure i intalled anything important. is this a separate product? I thought it was included in 9i 9.2?
Anyone?
Cheers,
Michael

Hi.
Hmm, your shared lib path appears to be ok. What version of Solaris are you running? Also what JDK version are you using (I'll assume you are using the one that installed with WLS)?
You might also try posting this to the weblogic.developer.interest.jdbc newsgroup.
Thanks,
Michael
Alex wrote:
Hi,
Please help. While trying to do a dbping, I get the following error:
[root@hkodsdb01 SMEloan]# java -Djava.library.path=/export/home/greenwood/bea/wlserver6.0/lib/solaris:/export/home/greenwood/bea/wlserver6.0/lib/solaris/oci817_8:/u01/oracle/product/817/lib utils.dbping ORACLE oracle smeloan 192.168.1.252
Starting Loading jDriver/Oracle .....
Error encountered:
java.sql.SQLException: System.loadLibrary threw java.lang.UnsatisfiedLinkError with the message '/export/home/greenwood/bea/wlserver6.0/lib/solaris/oci817_8/libweblogicoci37.so: ld.so.1: /greenwood/bea/jdk131/jre/bin/../bin/sparc/native_threads/java: fatal: libclntsh.so.8.0: open failed: No such file or directory'.
at weblogic.jdbcbase.oci.Driver.loadLibraryIfNeeded(Driver.java:202)
at weblogic.jdbcbase.oci.Driver.connect(Driver.java:57)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:146)
at utils.dbping.main(dbping.java:167)
The required file is under the Oracle directory specified. Also, I am having some problems with using the LD_LIBRARY_PATH for my shared library files. The command won't work with LD_LIBRARY_PATH and I must use the -Djava.library.path parameter. Any thoughts and suggestions?
Thanks so much for your help in advance.
Alex--
Michael Young
Developer Relations Engineer
BEA Support

Photoshop is a problem - "sticky" tools with external monitor

Hello!
When working in Photoshop is a problem - "sticky" tools. For example: working tool "Healing brush tool" we stifle alt and select the area and then release the Alt key and the target remains in the form of a cursor unstrument not be returned. The same problem with navigation for example, pinching the "space" appears "hand", which also remains.
New keyboard) works on mac. Connected laptop + external monitor, using a graphics tablet Wacom

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Could not initialize photoshop because of a problem using the adobe color engine (Win 7)

Was running the lastest version of Photoshop CS5 and added a second quad graphics card and 4 more monitors. Now PS will not start and I get the error message "could not initialize photoshop because of a problem using the adobe color engine."
Computer has 2 NIVDIA Quadro4 NVS420 graphics boards with 8 Samsung SyncMaster 1920x1080 monitors. If I disable 4 of the monitors CS5 starts normally. I do not have to remove the added graphics card. When I extend the desktop again to all 8 monitors I get the error above.
How do I trouble-shoot the problem? Is it Photoshop, NIVDIA or Windows 7?

Well, not exactly a full solution yet (at least for my setup), but I am certain now that this issue is (mostly) caused by nVidia's drivers. You may be able to fix your setup by simply installing the latest drivers for your NVS420 cards (266.45 for Win 7/64 rel. 01/12/2011).
Since you are using two identical cards, this could do the trick.
Caveats - Make sure you:
1. Select Custom Install, the Express Install will most likely not work properly.
2. Unselect the Audio Driver (if available), the nVidia HD(MI) Audio driver could
screw up your speech recognition (if you use it) or other audio software - it did for me.
3. Select Clean Install. If you don't, files like C:\Windows\System32\drivers\nvlddmkm.sys
and several other driver related files will not be overwritten, causing all sorts of neat effects.
4. After the Install is complete, reboot your system whether the Installer prompts you or not.
After testing various configurations, disabling two - six of my eight monitors I am at this point:
I am now using nVidia's lastest and greatest piece of crap (read driver), version 266.58, released just two days ago. After an initial snag with maximized windows extending to the bottom of the main monitor (underneath the taskbar), a re-install & reboot solved that issue.
All three driver versions tested (260.89, 260.99, 266.58) now allow me to start PhotoShop without any problems; providing I first disable the two monitors fed by my onboard graphics (nVidia 780a based), leaving me with six monitors connected to three GTS-450 cards. I can even re-enable the two other monitors once the program is open, and it continues to work fine. However, I must disconnect them again for the next start of PhotoShop.
On an interesting side note:
After disabling six monitors (leaving only two on a GTS-450), I was also able to open and run SoundBooth CS5, which previously would not open, citing the audio driver as the problem. After sucessfully starting SoundBooth I could re-enable all six other monitors (incl. onboards),
and that program now opens and works fine with all 8 monitors connected. [ODD !!!]
Other than Adobe Software, I've had only one other issue with my setup:
When playing online poker at PokerStars, occasionally and quite randomly one of multiple tables would freeze up. I'll try disabling the two onboard monitors for that program as well to see whether the random freezes stop.
Overall, while I think that Adobe produces fine software and nVidia has been in need of an overhaul for quite some time now, I also think that Adobe and nVidia software engineers need to work more closely together to ensure that problems like this don't arise in the first place after a product has been released to the public. IMHO, this is avoidable!
PS:
Here's a link to a great tool for multiple monitors, Display Fusion by Binary Fortress.
I use the free version, it allows you to do cool things like have individual wallpapers for all
your monitors, or stretch a single image across all monitors. With the Pro Version ($25),
you can also add individually customizable taskbars to each monitor, and a lot more.
http://www.displayfusion.com/

I have a problem using Pages. Whenever I type fl I get a symbol instead. Does anyone else have this problem?

I have a problem using Pages. Whenever I type fl I get a symbol instead. Does anyone else have this problem?

Hi Tom
On my machine it seems that the fi ligature doesn't exist with Times New Roman (installed version is 5.01.3x)
It's available in Warnock Pro but the st one which is designed in Warnock doesn't apply.
This last screenshot was made from Linotype Explore, the old free version.
Typography isn't really easy, even with modern tools
Yvan KOENIG (VALLAURIS, France) lundi 6 juin 2011 14:53:01
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Problem using tools

Similar Messages

Maybe you are looking for