Problem w/FCS3 Install DVD

In light of recent events, I wanted to make a bootable FCS3 backup external drive for safe keeping.
Problem is that my Install disk doesn't work anymore. I put it into my MacBook Pro's Superdrive and nothing happens. About 5 minutes later it shows up as Untitled DVD. All the other DVDs from the FCS3 pack work fine, my DVD drive works prefectly and there is not a scratch or smear on the install disk. It just doesn't work. Any advice?

Just wanted to post my resolution. I called Apple Care today, described the problem, got patched through to the Final Cut help desk. Read my support ID number off to them and they are sending me a new DVD free of charge. Good to know they are still supporting pre-FCPX products for now. Thanks David & Thanks Apple.

Similar Messages

  • New HD, problem with Leopard install DVD, How to reinstall OS?

    Hi,
    My hard drive crashed. I'm travelling and am in a small village in rural India. No Mac shops around. I've managed to get a new HD (WD 80GB), now I'm having trouble with the installation of the OS.
    Although I have my data backed up onto an external HD, I don't have the OS itself backed up. I have my Mac OSX Leopard installation disk with me. I thought this would cover me for exactly this sort of problem. But it doesn't seem to.
    I've got the new HD in and it seems to be working. It's been formatted and it shows up ok when I boot up with the Leopard disk. I get past the question about language and accepting the licence terms.
    Then it goes into checking source disk mode. When it gets to about half way I get a message saying it can't continue, Disk is dirty and it needs to be cleaned.
    Well, I've taken it out and it looks ok. I don't see any deep scratches. Still, this has now happened twice.
    I tried to copy the disk on another PC but it returned a message saying 'corrupt files'. So it seems as though something is wrong with the disk, even though it's not apparent when you look at it.
    Now I'm stuck. My very original 10.4 disks that came with the machine are thousands of miles away, and inaccessible for all practical purposes.
    The Powerbook has been registered with Apple since I bought it years ago, although it's not eligible for support any more.
    1. Is there a way I can download the OS X I need to get the show back on the road, whether from Apple or from a third party?
    2. Which version of the OS do I actually need for a complete new installation?
    3. What can I do about my apparently damaged Leopard dvd? Although I'd prefer to continue with Leopard, it wouldn't really worry me going back to Tiger for the next few months till I'm back in Apple-Mac-land. The main thing is to get the computer running.
    Any help gratefully received.
    Elle

    In order to use a correct install disc, it would have to be either the
    version that shipped with the computer (when new) or a retail
    version newer than that which shipped with it, in order for the disc
    to function in the computer.
    In some cities, there are companies who resell CDs and DVDs
    and they have a machine or tool that helps polish out scratches
    so they can still make use of those discs; or at least not toss
    away a potential profit. There may be a company or computer
    user with the kit to polish scratches out of the readable side
    of a DVD or CD disc. (They sell these, in many countries, too.)
    +In the middle of nowhere, you may have to improvise; or find+
    +someone with basic skills and simple tools. If only a lightly+
    +scratched Installer disc is the problem, simple polishing skills+
    +would probably make it more readable to the laser in the Mac.+
    • How to fix a scratched DVD with items you may have at home:
    http://www.associatedcontent.com/article/67659/howto_fix_a_scratched_dvd_withitems.html
    • To fix a scratched DVD... (avoid toothpaste, etc.)
    http://www.yelp.com/topic/new-york-to-fix-a-scratched-dvd
    {a google of the topic may help, if you can access outside
    of just one region, and if google isn't blocked, etc.}
    Perhaps if the issue is only with the Leopard DVD install disc
    you have, it may be cleaned professionally. IF you go there,
    ask if there is a reduced fee for this (they polish the surface)
    if for some reason, it still won't work after they are done.
    In the states some shops that bought & sold DVDs & CDs
    would pay much less for scratched-up ones, & clean them.
    This would include the device or careful hand-power, to
    get the surface layer of plastic as unscratched as possible
    so the laser-beam reader can pass through the bad places.
    The idea of getting a downloaded version would be an illegal item;
    and also those methods often get you malware or virus laden junk.
    You could probably use the serial number of your computer and
    visit one of the 'info by serial number' online services, to see what
    version OS X your computer (and its original specs, build date, etc)
    would have shipped with; so as to get a newer OS X retail disc.
    That, if no other option were available.
    An unused (not currently being run in a computer) official OS X
    install disc, not one from a different computer model, and not
    one too old, since older or equal (ie: 10.4.2, for a mid-2005 iBook
    would require a newer than 10.4.2 retail installer for Tiger, etc.)
    So, you see there is some kind of logic to getting a disc newer
    than the one you don't have; or an exact replacement.
    Someone who no longer has need for or uses the correct version
    Installer could give or sell you their disc. But, a download is certainly
    not something we'll go further into, since it would be illegal.
    Sorry for the longish reply, it is going on 1AM here in the farther
    north western northern hemisphere; and I should be asleep.
    Maybe someone else will post a timely reply, given your location
    and time differences. A real city may have authorized Apple sellers
    with a service department or customer relations who may offer
    some advice in regard to other services available. But almost
    any place that can polish scratches out of a CD may be of help.
    And try to not act too anxious about it; that may add to the cost.
    Or a piece of fine chamois cloth (fine suede) and light rouge may work.
    Polish in a spoke-wheel pattern from the center; not all in one direction.
    And hope the optical drive isn't also dirty; as they eventually get that way.
    Some places that rent movies on DVD may be able to clean/polish DVDs.
    Good luck & happy computing!
    +{edited 3x}+

  • Hi guys I'm really in need of some help. I have an IMac I3 for a while now I've been having a problem of my machine refusing it shut down , it goes to a blue screen with a spinning wheel but doesn't shut down.  And now won't boot from install DvD

    Please some one help me ...
    A) my mac won't shut down with external HD connected (if it's been used)
    B) there are disk permissions that can't be fixed SUID stuff ..
    C) I have now verified the Mac HD and it tells me it's corrupt in bold red writing and to start up from install DVD
    D) it won't boot from DVD so I cannot run the repair , initially the machine was spitting it out on start up , now it appears to be attempting to boot off DVD , well it sounds like it is .... BUT it's hanging with the Mac Logo and a wheel ... For um .... 30min now...
    E) weirdly when OSX is booted off the hard drive , it won't recognise the Install DvD or the applications one... It just spits them out....
    I had an old PPC 17" and it was a beaut .... Never had a single problem with it ...
    I bought this one December 2010 and it's been nothing but issues for a computer in excess of £1000 I'm extremely disappointed ... And weirdly the shutting down issue started when it was a week out of warrantee ... I feel conned and am almost at the point of throwing it at a wall and buying a PC

    Ok so I've done what you said and this is what it's come back ....
    I don't know that these are the errors , but they're the things which don't look right ...
    Throughout the shut down there is a recurring line ;
    It says ;
    Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
    Then there are 2 more which I think are related ;
    Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
    Then the same with fseventd 48 and diskarbitrationd 13
    Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
    Then the last process says "about to call: reboot (RB_AUTOBOOT).
    Continuing...
    And stops ...
    Hope this means something to you ... Thanks again for your help so far :-)

  • Problems booti and install Tiger on a G4 running 9.2.2 from an external DVD

    G4 PCI powermac, just a cd drive built in, running 9.2, sees external iomega dvd drive, reads dvds, cds, but when I try loading tiger from a dvd there are problems.
    I puu the tiger disc in, click on install, then get a message that startup disc cannot set this drive as the startup disc (or similar). Restarting and holding the c key doesn't work- I get blinking question mark and have to disconnect the iomega drive, put the 9.2 cd in the internal drive and restart again holding down c key to get anything. Then, running from the cd I can reset the startup disc to the hard drive. Neither can I install tiger running 9.2 from the internal cd, with the tiger DVD in the Iomega drive- it sees it, but requires that the tiger install disc be the startup drive, and we go around again if I try that.
    Q- is this possible, ie to load tiger on a PCI 400mhz powermac from an external DVD drive? has anyone done it? how?
    Thank you.
    by the way, PCI 400mhz powermac- doesn't need firmware updating, can't be put into target mode, can't boot from a firewire device (and I have tried, just in case)

    Joe, thank you very much for your post. The PCI G4 won't boot from an external USB dvd drive. Part of the apple support site says it will, another part says it won't. It won't. And it's well documented that the PCI G4 won't boot from a firewire device, neither can one put it into target mode.
    The method Joe suggests does work. I arrived at it independantly, with this method- I ran 9.2 from a CD and partitioned the internal hard drive 10GB dive, ended up with two 5GB partitions. then installed 9.2 on one partition.
    Restarted and I'm running 9.2.
    Then copied the Tiger install dvd from an external dvd rom, just a normal drag n drop copy, while running 9.2 (you can't do this under OS X) Then set the startup disc as the partition with the OS X install files on it.
    (I copied the Tiger files ontot he partition that wasn't running 9.2)
    Pressed restart, a long wait and then it sprang into life and installed OSX on the other partition, but without asking if I wanted a clean install- it just installed it alongside the 9.2 system folder.
    I had to specify no extras, it prompted for that, via a message that said free space was tight.
    All went well and it's running 10.4.4
    Problems that have arisen- 1. won't update the system. Downloads the files via software update, then says it can't use them. The update dmg files from the apple site won't work either.
    2. won't shut down properly- goes to a blue screen, then stays there- I have to unplug it every time.
    Otherwise ok.
    prior to working this out out, I visited the local apple store- no cd copies of tiger, exchange program withdrawn. Suggested I call apple. Did so, was directed to technical support. Technical support, very nice guy but knew zero about this.
    this is really a bit of fun for me, I have other macs, so no worries, but if anyone has a copy of Tiger on CD, I'd really like to borrow it.
    Thanks everyone
    Mike

  • G4 AGP, problems with Graphic Cards and booting from Install DVD

    I bought a G4 AGP (with DVD) on Ebay. It has Mac OS9.2 installed and its working correctly so far. It has an additional GraphicsCard in a PCI Slot, on which the Monitor is connected.
    1. The AGP Card doesn't give any output signal... I wondered if this would be the reason that somebody installed the additional Card...
    2. The AGP Card doens't show up in the Profiler... is this normal? According to other users this seems to be a common issue...
    3. I would like to install X 10.4, but when booting from CD, the process stops after a few seconds... and there is no signal on none of the video cards. I tried to remove one or the other card but no luck...
    the firmware is uptodate and the Install DVD is correct aswell, I just bought it from AppleStore...
    I don't have any original CDs available, so I cant run a hardware test.
    Anybody?
    G4 AGP   Mac OS 9.2.x  

    The AGP Card doesn't give any output signal... I wondered if this would be the reason that somebody installed the additional Card...
    Probably. I'd take out the bad original card and replace it with the additional card. Then, check and see if that's what caused the problem. Then only other choice is to take it to the Apple store and have them check it out.
    I don't have any original CDs available, so I cant run a hardware test.
    You can either contact the seller and complain about the missing disks or buy replacement disks for your machine. Give 1-800-MY-APPLE a call. The AHT disk should cost about $20. I don't know what the others would run.

  • Imac G5 startup problems - and cannot access leopard install dvd

    My imac G5 (3 years old) has been running fine - until the other day when I updated to the latest version of leopard using software update (dunno if this is related) - anyway the thing slowed down the next day - freezing/hanging/spinning coloured ball etc.
    Then it wouldn't restart - took forever - I have discovered if you leave it 2 hours it gets to a blue screen, another hour or so it gets to login screen but everything hangs - unable to use it for anything!
    I have tried to reinstall from DVD leopard BUT the dvd gets spat out of the drive when i C on boot - I also tried an older OS X install DVD but it also gets spat out! I can boot into unbuntu from a CD and the HD is fine and there - it seems the superdrive since the upgrade is only recognising CD's!!!!
    Anyway I phoned Apple - unable to help - out of Warranty!
    I cannot reinstall Leopard, cannot use imac and haev no idea where to go next (having already tried the old PRAM reset, verbose mode (showing I/O errors but going nowhere), safe mode not working, boot from DVD unable to work. The frustrating thing is I could install UBUNTU and erase HD and the system woudl work on this OS but I really want to get into OS X again!
    Any help.....please.....?

    If you used Software Update, you installed the Delta (only the latest update)version, not the Combo, which basically re-installs 10.5 up to and including the latest update.
    If you can see the iMac on your PB, do install the Combo and see if that helps. Often it will fix problems that occur when data has been corrupted in a previous update and the Delta, since it only updates one step, but doesn't go back and start from scratch, can't correct the problems, but the Combo can.

  • Replacement install DVDs not working (possible serial number problem?)

    I have been sent two sets of Mac OS X install DVDs as my old disk 1 was too scratched by my (now replaced) faulty optical drive.
    I asked for a disk 1 and disk 2 replacement and they sent them.
    First of all i dont know which is disk 1 or 2 as they arent written on the disk, only "Macbook pro Mac OS X install dvd" and "Mac OS X install dvd"
    The first set disk 1 serial number was - 2Z691-5841-A
    The second set disk 1 serial num was - 2Z691-5948-A
    My ORIGINAL disk 1 serial number is - 2Z691-5967-A
    My question is do the serials matter if it is still OS X?
    I attempted to install with both these and the Macbook PRo stayed on Grey screen then just spat them both out, where as with my original it goes through the install process (but can not finish due to the scratches)
    I called Apple again today when i got them and he said it was the laptop, however i know it isnt as my original disk boots to the install screen where as theirs dont, he said he would send the version of disk with my original serial and see if this works.
    So.....does the serial matter? I think he said there are three "versions" of disk 1, and my understanding was you can not use any of these unless it is with that specific version also of macbook pro.
    Thanks

    I purchased it directly from Apple on the Apple website.
    I told the guy at applecare the number on my original install disk 1 and he said he would send that one.
    Then i called again later to ask if they needed the serial of my actual macbook pro, he took it and said it looks like they have already ordered the correct CD.
    I HOPE it will be here Friday, waiting yet another week.
    If it does not work i cant think of anything, my originml works and the laptop has NOTHING installed on it, free hard drive....soooo all i can think of is taking it to an apple store with ALL the disks they have sent me and see if they know whats going on.

  • Help, start up from install DVD problem!

    My sister sold me her powerbook and I want a clean start and erase and re-install Tiger. She lost the install dvd and I bought one off ebay. When the machine goes to start up with the install dvd it will hang up on the grey startup screen where the little wheel rotates. it rotates for a minute and you can hear the dvd drive spinning and then the wheel stops rotating and hangs up. I've tried double clicking the intall icon with the computer on and it restarts and the same thing happens. the requirements in the readme file on the disc say it is compatible with my machine. couldn't find any real help in the support pages here. anyone have any ideas or remedies? any info would be appreciated.

    Welcome To Discussions primalscream!
    If you know what to look for, a Full Retail Version, of the Tiger Install DVD, can also be purchased rather inexpensively, at some additional online Apple retailers, Amazon, eBay, FastMac, etc.
    There are some on eBay. Here are three examples. But Caveat Emptor!
    New In Box
    Used
    Used This one is currently listed at $2.25.
    Shop Carefully, Examine All Documentation, And I Wish You Success!
    ali b

  • Is it possible to boot to a Windows 7 install DVD from an external USB drive on current iMacs?

    On the iMac I'm currently using, a mid-2007 24-inch, it's impossible to boot into a Windows install DVD from an external drive: I can hold down option on boot, and all my hard drives come up, but if the Windows disc is in my external DVD drive, it won't show up. I'll soon be upgrading to a late 2012 iMac, and I'd like to be able to install Windows 7 for a boot camp partition. Since that iMac has no built in drive, I'd like to know if using an external DVD drive will work on that model. I'd like to do that, seems easier than messing around with disk images. But we'll see...

    You can use an external optical drive to install Windows without any problem with a Late 2012 iMac.
    The reason that you couldn't install Windows from an external optical drive on the 2007 iMac is that it has got an internal SuperDrive, so Apple only allows you to use it to install Windows on your iMac

  • Grey screen won't allow me to install Leopard from install DVD

    I'm trying to do a fresh installation of Leopard on my Mac Pro. I have used the Leopard install DVD previously to install to this machine when Leopard was first released and I had no problem then. Now, the machine boots and I can hear it reading from the DVD. On screen is the apple sign and the rotating symbol underneath it. After a while I hear the hard disks power down and then up again and shortly after that, the screen fills with a dark screen from top to bottom and a message says that I need to restart the machine by holding down the power button. It never gets past that point. I can boot with no problem to the current installation on hard disk, but can't do a new installation.
    I've tried this with all peripherals detached. I've even tried taking out all the hard disks just ot see what happens, and I get the same problem. I've verified/repaired the hard disks and also run a repair on the security rights. No success.
    I have also tried the original Tiger install disk that came with the machine and that does the same thing, so I'm beginning to assume that this is some sort of hardware issue. I've checked the console logs, and the last thing that seems to be there is a message saying:
    14/04/2009 09:55:41 [0x0-0x1e01e].com.apple.systempreferences[230] Could not interpret boot device as either network or disk
    The hardware diagnostics tests report no problems.
    Anyone got any ideas?
    Thanks

    [I got a black screen telling me I had to reboot in many languages, what was it?|http://www.dslreports.com/faq/4970] Also has detailed description of what happens during a KP.
    [Apple docs: What's a kernel panic? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=106227]
    [Mac OS X Kernel Panic FAQ|http://www.index-site.com/kernelpanic.html]
    [Topic : kmosx: Kernel Panics? Don't panic too !|http://discussions.apple.com/thread.jspa?threadID=121923]
    [X-Lab: Resolving Kernel Panics|http://www.thexlab.com/faqs/kernelpanics.html]
    [Tutorial: Avoiding and eliminating Kernel panics|http://www.macfixit.com/article.php?story=20060911080447777]
    [Tutorial: An introduction to reading Mac OS X crash reports|http://www.macfixit.com/article.php?story=20060309075929717]
    [12-Step Program to Isolate Freezes and/or Kernel Panics|http://macosg.com/group/viewtopic.php?t=800]
    [Texas Mac Man's post on kernel panics|http://discussions.apple.com/thread.jspa?threadID=1723768&tstart=0]

  • Where can I get an eMac install DVD from?

    I've just been given an eMac that was destined for the skip. It came with no install DVD's and the administrator password is unknown. Whoever cleaned it out before parting company with it put in an administrators name as "apple" but didn't clear the password which is asked for in order to make changes & take over the computer. I wanted it as a spare & to play old games on that I can't bear to part with since getting my MacBook Pro intel i5 laptop (now updated with OS 10.7 Lion on it.)  I've done a bit of research to  try to find how to 'hack' into the system and change the administrator password but it seems I need the install disk to do a clean install again. As this eMac is running Mac OS 10.4 I should be able to wirelessly connect it to my established system once I gain control of it & use it as storage/back up etc.  I'd be grateful for any suggestions of either where I can get a disk from or how to change the root password.  Is there anyone out there who can help? I'm not a very techy pro though have had macs for many years so know my way around one fairly well.  Thanks

    It will be difficult to find the original Install/Restore disc, and then it may have an OS lower than Tiger 10.4
    Here's severtal methods to reset the password without the install disc:
    1. boot computer and hold the "apple" key and the "s" key.
    2. wait for terminal show
    3. release keys
    4. type without the quotes: "/sbin/mount -uaw"
    5. press enter
    6. type without the quotes: "rm /var/db/.applesetupdone
    7. press enter
    8. type without the quotes: "reboot"
    9. press enter
    This will let you create a new admin account when you reboot your computer.
    Also, without the discs, look at Mac OS X Tip - No Password, No Root, No CD? No Problem.
    http://www.macobserver.com/tip/2003/06/16.1.shtml
    Here is a way to get around not knowing the admin password on Macs.
    To reset your OS X password without an OS X CD you need to enter terminal and create a new admin account:
       1. Reboot
       2. Hold apple + s down after you hear the chime.
       3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
              * mount -uw /
              * rm /var/db/.AppleSetupDone
              * shutdown -h now
       4. After rebooting you should have a brand new admin account. When you login as the new admin you can simply delete the old one and you’re good to go again!
     Cheers, Tom

  • Is it possible to make a copy of the Leopard install DVD?

    Is it possible to make a copy of the Leopard install DVD? If so, is there a special way this has to be done? I just found out that we needed to use the Leopard install DVD to recover a complete backup from Time Machine after a recent hard drive failure. We have the family pack of Leopard, so I would like to keep the original at home and send a copy when my daughter goes off to college in case she needs to recover again. Her machine was originally a Tiger MacBook, so those install disks will not work. If it is not possible to copy the DVD, is there a way to create a bootable utility to do a time machine recovery?

    This half-solved my problem. I have had no problems creating a backup copy for my intel based computers, but non-intel based computers are problematic; a G5 powermac tower and a G4 Powerbook. Both with super drives for single density burning. Both have Leopard running, installed from an install disc purchased from Apple. However, neither will mount the copy, but intel based computers will. have burnt/burned with both toast 9 and Disc Utility. Discs won't mount and are "spit out" by the drive.
    Power Mac G5 OS X: 10.5.4
    Model Identifier: PowerMac7,3
    Processor Name: PowerPC G5 (3.0)
    Processor Speed: 2 GHz
    Number Of CPUs: 2
    L2 Cache (per CPU): 512 KB
    Memory: 1.5 GB
    Bus Speed: 1 GHz
    Boot ROM Version: 5.1.8f7
    Any thoughts?
    -Jim

  • My Leopard install DVD is getting caught in a loop

    I'm having a problem with my Leopard install DVD. I'm running Leopard 10.5.7, and I wanted to use Disk Utility, so I inserted the intall DVD, double clicked the icon, and pressed enter to restart using the disk.
    What happened next was the computer restarted, gave me the chime, went to a gray screen with no apple logo or spinning gear, then restarted and looped this same sequence repeatedly. I've checked the surface of the install DVD and it seems undamaged, so my only conclusion is that something software related is happening. Anyone else run into this?
    The install DVD is version 10.5.1.

    Okay, so I used Disk Utility on the internal drive to verify and then repair permissions (long list). Then I attempted to verify the disk and got a message saying Disk First Aid Failed and the following info in the history: Verifying volume “Macintosh HD”
    Performing live verification.
    Checking Journaled HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume information.
    Invalid volume file count
    (It should be 956726 instead of 956732)
    Invalid volume directory count
    (It should be 233009 instead of 233003)
    The volume Macintosh HD needs to be repaired.
    Error: Filesystem verify or repair failed.
    After that, I put the install disk in and restarted holding the shift key. Got the gray screen for a long time (DVD seemed to be doing something), and then the computer restarted. This time I held down the option key, got the Startup Manager and selected the install disk. And away we went with the gray screen loop again. I let it try to restart from the install disk 6 times before holding down the eject button and ejecting the install disk which allowed the 'puter to boot from from the internal drive.
    And that's where I stand.

  • Password reset from Install DVD does not work

    PowerBook G4 17"
    Mac OSX 10.4.10
    After a system failure, I got the gray screen with the question mark. I restarted from an external drive, and, from "Disk Utility" I ran both "disk repair" and "permissions repair" to the internal drive. There were several errors, but all were repaired. When I restarted from the internal drive I was asked for a user id and a password. I entered them, but were refused. Then, I followed the steps indicated in "Mac OS X: Changing or resetting an account password" in this forum: I started from the install DVD, changed the password, and restarted, but the system refuses my user and password, (the window shakes and blanks out the password field). I have repeated all the steps several times, but the system keeps refusing my login. When I start from the external drive I can see all my documents, files, folders, image, etc, in the internal disk.
    I will appreciate any sugestions in order to solve this problem. Thanks a lot.

    Hi, glad to know that your LaCie HD is OK. now if you follow the instructions for Silverkeeper, you will find that it will give you an option to copy your LaCie HD clone to your Mac's internal drive. I don't have Silverkeeper, so any info. I give is from the link I gave to you earlier.
    This part in particular ..
    Drag the volume icon for the drive you have started from to the Source field of SilverKeeper.
    Drag the volume icon for the drive your wish to clone to, to the Destination field.
    "Save SilverKeeper settings.
    Click Go, and wait until completion.
    When Backup is complete, quit SilverKeeper.
    Restart your Mac; don't press any keys; you should restart to your normal, original startup drive; if >there is a login prompt, login to account that has Admin privileges
    Open System Preferences - select Startup Drive control preference.
    Select the backup drive as the startup drive.
    Restart your Mac; you should then startup just as if you had started up from the original, but it >should be your backup drive. You should not be prompted for any OS X registration.
    Please review the release notes for SilverKeeper at the support website:
    http://www.silverkeeper.com or http://www.lacie.com/silverkeeper which will reveal the most >current information."
    When you have done this you will have an exact copy of your LaCie HD on your computer. Nothing else needs to be done after this - you just use your Mac!
    Best wishes,
    Robert.

  • Windows 7 Install DVD

    I have created a Windows 7 Install DVD, however when I place it in my Macbook it says that the disk is empty. But when I put it in my housemates Dell, it read it as an install DVD. Should I just make a new DVD, and if so what are the steps and programs used to ensure that it will be compatible with my Macbook. Thanks!
    BTW I used the 64-bit version.

    You may have trouble with x64 version. Some have had to reburn at slower speed.
    It should have come up with "Select CD Option 1: 2:" - which is one of the problems with Macs that don't officially support x64.
    Apple has a list of Macs that support Vista x64.
    http://support.apple.com/kb/HT1846

Maybe you are looking for