Problem when clicking refresh button

When I click browser refresh button, i get two 25005 errors.
Otherwise, app works ok.
Any ideas how to debug this?

JAK,
It sounds like you have not terminated further processing in the form. Try adding 'RAISE Form_Trigger_Failure;' after your GO_BLOCK(); call. This should ensure no further processing is done after you navigate to the specified block.
Hope this helps.
Craig...

Similar Messages

How to make the session expire when the refresh button is clicked

Hi All,
I am writing a Struts application where I want the session to expire when the user clicks refresh button or refresh the page by hitting F5, like any Bank sites. Any help will be appreciated.

The trick isn't invalidating the session. The trick is detecting refresh requests.
The Synchronizer Token pattern can handle this.
Struts can do this for you. Check out [this article|http://www.javaworld.com/javaworld/javatips/jw-javatip136.html?page=1]
Cheers,
evnafets

Which form will be submitted when i click refresh button.

HI,
which form will be submitted when i click on refresh button.

When you click refresh button, it will send to the server the exact same request that it sent to get to the current page.
If the previous navigation was done by a form submission, then yes, that form submission will be repeated.

Microsoft Expression Encoder 4 crashes when clicking Start button to begin live smooth streaming to a publishing point created in Windows Server 2012

Microsoft Expression Encoder 4 crashes when clicking Start button to begin live smooth streaming to a publishing point created in Windows Server 2012, I've got the following error. Can anyone help me with this? Thanks in advance!
Nombre del evento de problema:   CLR20r3
Firma del problema 01:   encoder.exe
Firma del problema 02:   4.0.4276.0
Firma del problema 03:   4eafa0d7
Firma del problema 04:   mscorlib
Firma del problema 05:   4.0.30319.18408
Firma del problema 06:   52310b91
Firma del problema 07:   3e69
Firma del problema 08:   0
Firma del problema 09:   System.InvalidCastException
Versión del sistema operativo:   6.2.9200.2.0.0.272.7
Id. de configuración regional:   3082
Información adicional 1:   5861
Información adicional 2:   5861822e1919d7c014bbb064c64908b2
Información adicional 3:   dac6
Información adicional 4:   dac6c2650fa14dd558bd9f448e23afd1
Lea nuestra declaración de privacidad en línea:
http://go.microsoft.com/fwlink/?linkid=190175
Si la declaración de privacidad en línea no está disponible, lea la declaración de privacidad sin conexión:
C:\Windows\system32\es-ES\erofflps.txt

2014-12-17 16:05:41 Msg 5170, Level 16, State 1, Server \\.\pipe\Microsoft##WID\tsql\query, Line 2
Cannot create file 'C:\Windows\WID\Data\SUSDB.mdf' because it already exists
Looks like somebody forgot to remove the database from the last time WSUS was installed.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

How to switch to another page when clicking a button

I have a main frame consits of many button.What I need to do when click
a button,it switch to another page?
Thanx....

Try this, it should work.
// not tested
JButton linkButton = new JButton("<html><a href=\"http://forum.java.sun.com\">link to<br>forum</a></html>");

How to display the details of particular order when click on button in sapui5

Hi Experts,
How to display the details of particular order when click on button in sapui5?
I Have a requirement that is i want display all the list of orders coming from backend as shown in image below
then in that i have a button when i press the button it need to display the details of particular order as shown in image below
Please help me .
Thanks & Regards
chitti

Does anyone know how to display the index of current desktop?
Brute force - - I have written the number of the Desktop directly onto the wallpaper picture I am using for each Desktop (easy to do with Preview).
All Desktops are using different wallpaper photos, so they are easily recognized by the color scheme, and in the upper left corner is the number.
Regards
Léonie

How to hide a TextField when clicking another button

Hello!
I've been able to generate a TextField to appear when clicking a button, but when I click on another button, to display some more information, I still have the first TextField displayed. I've had a look around, but not been able to find anything to help me with getting the first to disappear. Can anyone provide any ideas for this?
The code I'm using for displaying the TextField is:
button10.addEventListener(MouseEvent.CLICK, fl_ClickToPosition);
var fl_TF:TextField;
var fl_TextToDisplay:String = "Send disply to the right screen/projector";
function fl_ClickToPosition(event:MouseEvent):void
fl_TF = new TextField();
fl_TF.autoSize = TextFieldAutoSize.LEFT;
fl_TF.background = true;
fl_TF.border = true;
fl_TF.x = 300;
fl_TF.y = 100;
fl_TF.text = fl_TextToDisplay;
addChild(fl_TF);
Many thanks in advance

all your buttons should call the same function.
because each button probably triggers different text to be displayed, you can use an object or dictionary to associate the buttons and their text:
// execute these two lines and your function once at the start of your app
var dictionary:Dictionary=new Dictionary(true);
var fl_TF:TextField;
function fl_ClickToPosition(event:MouseEvent):void
if(fl_TF&&fl_TF.parent){ /
fl_TF.parent.removeChild(fl_TF);
fl_TF=null
fl_TF = new TextField();
fl_TF.autoSize = TextFieldAutoSize.LEFT;
fl_TF.background = true;
fl_TF.border = true;
fl_TF.x = 300;
fl_TF.y = 100;
fl_TF.text = dictionary[e.currentTarget];
addChild(fl_TF);
////////// and for each button use something like:
button10.addEventListener(MouseEvent.CLICK, fl_ClickToPosition);
dictionary[button10] = "Send disply to the right screen/projector";

Iframe in web dynpro refreshed automatically when clicking on button

Hello,
I have called standard SAP T-code using webgui in web dynpro component insdie iframe.
whenever I clicked on button. Screen inside iframe refreshed automatically.
Consider tcode having multiple screen. If I clicked on button, iframe getting refreshed and return to first screen of the tcode.
Please do the needful
Thanks & Regards
Kishan Rana

You are using either the built-in Mozilla PDF Viewer or the built-in Chrome PDF VIewer and have a LiveCycle Designer XFA form being viewed. You need to configure the web browser accordingly.
XFA-based PDF forms on Mozilla Firefox and Google Chrome
There are are probably registry entries available for setting this up in the HKEY_CURRENT_USER registry hive for both Mozilla Firefox and Google Chrome, but I don't know them and have not seen them posted on any vendor site. Then again, I haven't looked either.

Audio ads from Sezchuan when I click REFRESH button.

Dear Mozilla,
One of us has been hacked, and my Avast! (paid) and Malwarebytes (paid) aren’t noticing; but Firefox keeps remarking that my computer is VERY slow, which indeed it is. When I try the REFRESH button—on your site, I should add—I get only a series of audio tech news. The tapes mentioned Senzchen, from whence my Lenovo hails, but I thought you should know about this development. If you have time to stop me before I wipe my computer and start over, please do so!
Samudra (SamMadHands)
[email protected]

You didn't provide your troubleshooting data, but I'd suggest you do the following:
* [[Troubleshoot Firefox issues caused by malware]]
* Test a new profile, [[Use the Profile Manager to create and remove Firefox profiles]]

Skillbuilder Modal popup turns black when click submit button

Hi,
Ive used the great skill-builder's plug-in to display my page 2 popup modally from page1 by clicking a button and it works as expected. However i realized when i click the Submit button on the popup page it turns black(pls get me right here its the background of the popup page-page2 not the first page-page1 i am talking about) while refreshing.
apex 4.1.0/Oracle 11g Ent,
any help please...regards.

Skillbuilder Modal uses software named "Colorbox" for its modal presentation. The first problem that you had probably occured because you had not yet selected a theme. The position of the close button varies depending on the theme that you select. You selected theme 1, therefore the close button is in the lower right hand corner. Some of the other themes may better suit your taste. There are 5 to choose from. BTW, these themes cannot be easily changed so you pretty much have to decide on 1 of the 5. I think Dan is working on some more options with future releases of SB Modal.

No response when click Simulation button in MIRO

Hello Gurus,
I found a problem. In MIRO when I clicked simulation button, nothing happens.
When I save the document, no document generated, but I didn't get any error message.
Please help, thank U!

you have to check some points:
1) what r the views maintained in material master and material type.
2) Accounting view is maintained or not.
3) In PO, check the delivery tab page. Check the GR is valuated or non valuated.
4)Check the accounting document is generated at the time of GRN.
Sachin

Why image background is not at center desktop when click fullsceen button

hi. I'm building fullscreen button. and when i click to run fullscreen image it in left not center.
background image in application i make it by skinclass. it run normal and at center desktop when run but when click fullsreen it not
and fullscreen:
    private function init():void {
                fullScreenState = stage.displayState;
            private function btn_click(evt:MouseEvent):void {
                if (btn.selected) {
                    fullScreenState = StageDisplayState.FULL_SCREEN;
                } else     {
                    fullScreenState = StageDisplayState.NORMAL;
                try {
                    stage.displayState = fullScreenState;
                } catch (any:*) {
and button:
<s:ToggleButton id="btn"
                        click="btn_click(event);"
                        width.trangchu="121" x.trangchu="401" y.trangchu="-27" height.trangchu="95" />
Can u help me please?

I don't know how to fix your problem, but just wanted to say
that I wholeheartedly agree with kglad.
I am working on a project now that needs to have a custom
scroll bar that I can incorporate with dynamic text fields that
need to be scrolled.
Four days ago, I decided to save some time and just use and
modify the UIScrollBar Component.
ALL SORTS OF LITTLE BUGS EVERYWERE.
After messing with it for an entire weekend, I decided to
just bite the bullet and write my own scrollbar class.
Here is what happened for me when I decided to write my own
class.
own class --------------------vs------------------- component
took 4 hours ------------------------- took 3 days until quit
3 mc's in the library to modify if you want
------------------------ I don't even want to count the
to change the look --------------------------- amout of mcs u
gotta change
can change width of scrollbar on the fly -------------------
can't change width of a vertical sb
added an autoscroll function that starts
------------------------------ no such function
scrolling down slowly upon page load
increase file size by a few kilobytes ---------------------
increase filesize by like 30kb
NO BUGS -------------------- BUGS EVERYWERE.
Lesson I had to learn: Components waste more time than I did
on my World of Warcraft phase.
They are good for designers who have limited scripting
knowledge, just be aware that they can be very buggy. There are
lots of third party developers that sell menu components and the
like. You may want to look in that direction if you absolutely must
use components and the included ones aren't working for you.

Skip validation when clicking cancel button in Applications panel

Validation skipping can be done by making 'immediete' property to 'true'. But in fnd ApplicationsPanel, cancel button don't have an 'immediete' property. Only revert button has that property. So how can I skip validation when the cancel button is pressed?

Hi Shaik,
<li> You need to set Function type E to Application toolbar button.
<li> Go to PF Status of the screen -> Click on application toolbar->Double click on button->It takes you to Function attributes Popup->There , u will see Function code after that Function type. Select or give type to E.
<li> Write this piece of code in PAI.
PROCESS BEFORE OUTPUT.
MODULE status_2200.
PROCESS AFTER INPUT.
MODULE skip_mandatory AT EXIT-COMMAND.
*&      Module SKIP_MANDATORY INPUT
MODULE skip_mandatory INPUT.
IF sy-ucomm = 'TEST'.
    LEAVE TO SCREEN 2000.
ENDIF.
ENDMODULE.                 " SKIP_MANDATORY INPUT
I hope that it solves your problem.
Thanks
Venkat.O

Calling URL when click on buttons using web dynpro - ABAP

Hi All,
I am new to web dynpro application development and i am facing issue when i try to test my application.
simple require when i click on button i should direct the to one of url say 'http://www.google.co.in/' my application is activate with no error but when i test the application i am getting below error , can someone please provide me the solution or way out.
The URL http://ides47:8062/sap/bc/webdynpro/sap/zwa_calling_url/ was not called due to an error.
Note
The following error text was processed in the system N6Q : Access via 'NULL' object reference not possible.
The error occurred on the application server IDES47_N6Q_62 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WDR_CONTEXT_MENU_HANDLER~CONTEXT_MENU_CALLED of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: IF_WDR_CONTEXT_MENU_HANDLER~CONTEXT_MENU_CALLED of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: IF_WDR_ADAPTER_EVENT_HANDLER~HANDLE_EVENT of program CL_WDR_CONTEXT_MENU_HANDLER===CP
Method: IF_WDR_CLIENT~GET_CLIENT_UPDATES of program CL_WDR_CLIENT_SSR=============CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
HTTP 500 - Internal Server Error
Thanks,
Parab

Hi ,
It seesms something you are missing. It would be easy for us if you could paste your code which you have written in the Action of Button.
Sample code for your reference :
METHOD onactionget_url .
data lo_window_manager type ref to if_wd_window_manager.
data lo_api_component type ref to if_wd_component.
data lo_window         type ref to if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
CALL METHOD lo_window_manager->CREATE_EXTERNAL_WINDOW
EXPORTING
    URL            = 'http://www.google.co.in/'
    MODAL          = ABAP_FALSE
    HAS_MENUBAR    = ABAP_TRUE
    IS_RESIZABLE   = ABAP_TRUE
    HAS_SCROLLBARS = ABAP_TRUE
    HAS_STATUSBAR = ABAP_TRUE
    HAS_TOOLBAR    = ABAP_TRUE
    HAS_LOCATION   = ABAP_TRUE
RECEIVING
    WINDOW         = lo_window.lo_window->open( ).
ENDMETHOD.

ICal Crashes when clicking "calendar" button to show available calendars

After doing the Lion upgrade I've troupbe with iCal. iCal just opens fine - but when trying to access "calendar" button it shows no reaction at all. In some cases a popout callout appears which is empty (and does not show one single calendar out of my existing 10). If I repeat clicking the button iCal crashes.
Any help is highly appreciated.

BusyCal is not at the root cause - it has s.th to do with the user account. As described in an other post you can fix it by deleting the prefs of iCal:
https://discussions.apple.com/message/15709996#15709996
When it comes to BusyCal there is only one thing with Lion that might be unexpected. Lion fires off iCal each time iCal receives a Push from Mobile Me. In practice you may add an event to BusyCal and iCal will be started immediately. Same for notification. The only way to get rid of this is to change iCal update interval from push to s.th. different. Unfortunately Apple limited Mobile Me Push to iCal only. Other Apps have no access to..
Almi

Problem when clicking refresh button

Similar Messages

Maybe you are looking for