Problem when i create an index

Hello,
I'm a beginner on KM, and i have a simple problem (i think... ).
I want to create an index on Simple Web Repository (with 2 Web Adresses created) and i have the error : " The repository needs the properties service to be attached to a classification index ". So, i'm going to check "Simple Web Repository" configuration and i can see there is the 'properties' service in "Repository Services"...
Think it's nothing, but, i'm lost...

Solution : Restart Servlet engine....
Sorry

Similar Messages

When To Create an Index

Hi,
First pardon my generic question, but I am posting this after much frustration. When you create an index on a table, which thought process you follow? I mean instead of blindly throwing index on every column in where clause, how do you decide as whether to create index or not, type of index, composite index or not etc. Please do the favor and describe in simple words.
Thanks a million.

EdStevens wrote:
Antonio Navarro wrote:
Usually, a index is better where it return the same data more faster than a full scan
HTH"All else being equal"
But all else is never equal.
don't forget that every index you create causes additional overhead for every insert/update/delete statement on that table. So among other considerations you need to balance the negative impact of the index on DML statements vs. the sometimes positive impact on queries.Which means the only simple answer to the generic question on when to create an index is that there are no simple answers: http://jonathanlewis.wordpress.com/2010/05/11/philosophy-10/
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
A general reminder about "Forum Etiquette / Reward Points": http://forums.oracle.com/forums/ann.jspa?annID=718
If you never mark your questions as answered people will eventually decide that it's not worth trying to answer you because they will never know whether or not their answer has been of any use, or whether you even bothered to read it.
It is also important to mark answers that you thought helpful - again it lets other people know that you appreciate their help, but it also acts as a pointer for other people when they are researching the same question, moreover it means that when you mark a bad or wrong answer as helpful someone may be prompted to tell you (and the rest of the forum) what's so bad or wrong about the answer you found helpful.

What is the "No database index" means when you Creating Secondary Indexes?

HI,
   I'm Creating Secondary Indexes in the maintenance screen of the table(se11)
   There are three options under "Non-unique Index":
   1.Index on all database systems
   2.For selected database systems
   3.No database index
My questions is :
What do u mean by "No Database Index" and when is it used.
Can anybody plz tell me what's the difference of this three options ?
Here is what i found in the help:
   No database index: The index is not created in the database. If you
   choose this option for an index that already exists in the database,
   it is deleted when you activate this option.

Hi,
It is clear from the help documentation,
Here see what the help document says:
Create the index in the database (selection)
Whether an index improves or worsens performance often depends on the database system. You can therefore set whether an index defined in the ABAP Dictionary should be created in the database.
This makes it easier to install a platform-specific customer system.
You can set this option as follows:
1. Index in all database systems: The index is always created in the database.
2. In selected database systems: The index is created depending on the database system used. In this option, you must specify the databases in which the indexes are to be created. You can do this either on an inclusive (list of systems on which it should be created) or an exclusinve (list of systems on which it should not be created) basis. In either case, you can list up to four different database systems.
3. No database index:: The index is not created in the database. If you set this option for an index that already exists in the database, it is deleted when you activate the table in the ABAP Dictionary.
Note: Unique indexes have an extra function, and must therefore always be created in the database. The database system prevents entries or index fields being duplicated. Since programs may rely on this database function, you cannot delete unique indexes from the database.
Hope it helps you,
Regards,
Abhijit G. Borkar

A namespace problem when doing Create InfoArea in bw system

Dear all,
we met a problem when excute a process in our bw system:
our process as follow:
rsa1(Data Warehousing Workbench:Modeling) --> InfoProvider --> Create InfoArea
then a error message window came out as below.
error in object editing
No valid change license available for n
/BPR3R/
Choose 'Display object' or 'Cancel'.
its detail message is as follow:
Message no. TO127
Diagnosis
You cannot edit the object AREA 0INDUSTRIES. This may be due to the following reasons:
The corresponding namespace /BPR3R/ is not entered in the namespace table with a valid change license.
In the namespace table there is no entry with a valid change license that matches the template /BPR3R/.
System Response
The function terminates.
Procedure
Check the name of the object AREA 0INDUSTRIES. If necessary, choose another object name.
Otherwise, let the system administrator check the change licenses of the namespaces in your SAP system.
Maintain the namespaces in the Tools of the Transport Organizer under Administration -> Display/Change Namespaces.
You need to check and correct the entries that match the template /BPR3R/.
You need to distinguish between the following cases:
The namespace is /0SAP/:
Make sure that the namespace role is C (recipient) and the flags SSCR popup and SAP standard are activated. The license fields remain empty.
You did not create the namespace yourself. Instead, the namespace owner is SAP or another software vendor.
Make sure that the namespace role is C (recipient). The field Repair license must either contain the valid license, or the flag SSCR popup must be activated. Contact the namespace owner and ask what you should now do, and what the valid repair license is.
You are the namespace owner:
Proceed according to the documentation on applying for and setting up namespaces. If the namespace role is P (producer) then you need a valid development license. For information on this, see the SAP Library under BC - Basis Components -> Change and Transport System -> BC - Namespaces and Naming Conventions -> Reservation of Namespaces).
Then we did the below action:
se06 --> system change option
in this view, we found /BPR3R/ this Prefix.
And it is empty in /BPR3R/ 's namespace/name range volume.
What is next action we should take to solve this problem?
Anyone experienced or expert,
Please kindly give advice.
Regards,
Allen

Hello Allen,
Cold you please check the following notes which explain about this namespace creation and transport ?
401778 - Using namespaces to develop individual BW objects
150451 - Setting up development namespaces
105132 - Reserving namespaces
150451 - Setting up development namespaces
Best regards,
Rafa

HELP: Problem when programmatically creating a proxy portlet

All,
I am programmatically creating a proxy portlet from a registerd WSRP Producer portlet. The problem is that when I create the proxy portlet, and then add the portlet to the page I don't get any mode icons in the portlet (i.e. maximize/minimize icons). Everything else works okay in the portlet though. When I create the same proxy portlet from the Admin Portal and add it to a page, I get the maximize/minimize icons so therefore I assume it's something in my code. Here is the method I wrote to create the proxy portlet:
public String registerPortlet (HttpServletRequest request, String producerHandle, WSRPPortlet portlet) throws Exception
    ProxyPortletManager portletManager = ProxyPortletManager.Factory.getAdapter ();
    PortletDescription portletDescription = PortletDescription.Factory.newInstance ();
    portletDescription.setPortletHandle (portlet.getHandle ());
    LocalizedString lString = LocalizedString.Factory.newInstance ();
    lString.setLang ("en");
    lString.setValue (portlet.getName ());
    portletDescription.setTitle (lString);
    portletDescription.setDoesUrlTemplateProcessing (true);
    portletDescription.setTemplatesStoredInSession (true);
    log.info ("Registering portlet for producer: " + producerHandle);
    log.info ("+++++ Portlet Handle: " + portlet.getHandle ());
    log.info ("+++++ Portlet Name: " + portlet.getName ());
    int portletId = portletManager.createProxyPortlet (producerHandle, portletDescription, ProxyPortletManager.LocaleHelper.findLocale ("en"), request, PORTAL_NAME);
    return String.valueOf (portletId);
}Any help you can offer is very much appreciated. Thank you.
- T.C.

I dug into this a little more myself, and THOUGHT I found the answer, but it didn't work. I saw that the PortletDescription object has a method called:
setMarkupTypesArray (MarkupType[])
...and MarkupType has a method called:
addWindowStates (String)
So I added the following code portion before i call portletManager.createProxyPortlet (...):
MarkupType mt = MarkupType.Factory.newInstance();
mt.setMimeType("text/html");
mt.addWindowStates("maximized");
mt.addWindowStates("mimimized");
portletDescription.setMarkupTypesArray(new MarkupType [] {mt});...and still when I add the proxy portlet to a page it doesn't have the proper maximize/minimize icons. Can anyone help???
Thank you.
- T.C.

I have a problem when I create message via t-code notif_create.

when I create message via 'notif_create',I can't fill the blank 'Component'.How can I get the 'Component'?

Hi Liu,
the F4 option is available for the component blank and we can select from them generally.ALso check the following SAP Notes...which may prove useful..Note 813075 - DSWP: Create Support Desk message missing category field
Note 857793 - Determine system context for messages
Note 853597 - Sorted display of F4 helps in NOTIF_CREATE
Hope it helps.
Br
Sri
Award points for helpful answers

Why encounter the problem when i create a table

hi,all
I want to make a news release application,therefore i have to create tables,firstly,i have created a categories table:
just like :
category_id(number)
category_name(varchar2);
secondly,i created the second table which is for storing the news contents,so i created the second table news,just like below:
news_id(number)
category_name(varchar2)----this column is refered from the categories table
news_title(varchar2)
news_content(Blob)
news_editor(varchar2)
release_time(timestamp);
there comes the quetion,when I was creating the second table,an error occured,which said,matching primary key(s) not found.what is the problem ?somebody konws,and does someone have the news board application developing experience ?who can give me a guide ?
best regards
hlee

Hi Hlee,
Have you specify category_name as primary key of the previous table. Then only you can refer the column in the other table.
Thanks and Regards
Maheswara

Problem when we created the managed server to configure different ports.

I am trying to configure different ports for admin console and my communication service as we can’t share admin port to the outside world.
So that only admin can access admin console using admin port.
And out side clients can access my webapplication using different port.
For this i have created the managed server in weblogic.and I deployed the application on managed server.
Now admin server is running on 8001 port and my Communication Service application is running on 7001 port.
But when I tried to configure MBeans related to myCommunicationServiceApplication those were disapper on admin console. And the other wlng services are appearing on admin console.
1. Since my application deployed on managed server MBeans registration happened from myapplication hence it’s disappear on admin console.
Now If I want to configure Mbeans (related to my communication service) how can I configure it?
2. My communication service using configurationStore module and other wlng services.
When I tried to start my application on managed server I got the below error:
<Apr 28, 2009 12:22:44 PM IST> <Error> <Deployer> <BEA-149231> <dscp11166.TechMahindra.com> <Unable to set the activation state to true for the application 'wlng_nt_qualcomm_active_mediation [Version=1.0]'.
com.bea.wlcp.wlng.api.storage.configuration.ConfigurationException: Configuration store module is not available.
3. I tried to target all wlngResources to manged server by editing config.xml file.
Then all wlng services disappears on admin console. If this is the case how can I configure container/account services on wlng?
I have created the Basicweblogic domain.
Below is the config.xml for reference.
"QualcommServer" is managed server name.
Can any one please suggest me how to configure this kind of scenarios?
<server>
<name>AdminServer</name>
<machine>new_Machine_1</machine>
<listen-port>8001</listen-port>
<default-iiop-user>weblogic</default-iiop-user>
<default-iiop-password-encrypted>{3DES}W8nBdoJPRZ8TkwcXwAZoxA==</default-iiop-password-encrypted>
<listen-address>localhost</listen-address>
</server>
<server>
<name>QualcommServer</name>
<machine>new_Machine_1</machine>
<listen-address>localhost</listen-address>
<server-start>
<java-vendor>Sun</java-vendor>
<java-home>C:\Program Files\Java\jdk1.6.0</java-home>
<class-path>C:\bea\wlng400\server\lib\weblogic.jar;C:\bea\wlng_pds400\lib\wlng\wlng.jar</class-path>
<bea-home>C:\bea</bea-home>
<username>weblogic</username>
<password-encrypted>{3DES}W8nBdoJPRZ8TkwcXwAZoxA==</password-encrypted>
</server-start>
</server>
<embedded-ldap>
<name>managedserver</name>
<credential-encrypted>{3DES}9q80YuFJueVVJxoWduJA1OGhbqk14EpgQWWyTrzlmxo=</credential-encrypted>
</embedded-ldap>
<configuration-version>10.0.1.0</configuration-version>
<app-deployment>
<name>wlng_nt_session#4.0</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/wlng_nt_session.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>interceptors</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/interceptors.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>wlng_prm</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/wlng_prm.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>wlng_nt_qualcomm_active_mediation#1.0</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>servers\AdminServer\upload\wlng_nt_qualcomm_active_mediation.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<machine>
<name>new_Machine_1</name>
<node-manager>
<name>new_Machine_1</name>
<listen-address>localhost</listen-address>
</node-manager>
</machine>
<jms-server>
<name>JMSServer-AdminServer</name>
<target>AdminServer</target>
</jms-server>
<jms-system-resource>
<name>WLNGJMSResource</name>
<target>QualcommServer</target>
<descriptor-file-name>jms/wlng-jms.xml</descriptor-file-name>
</jms-system-resource>
<custom-resource>
<name>networktier</name>
<target>AdminServer</target>
<descriptor-file-name>custom/nt.xml</descriptor-file-name>
<resource-class>com.bea.wlcp.wlng.management.descriptor.resource.WlngTierResource</resource-class>
<descriptor-bean-class>com.bea.wlcp.wlng.management.descriptor.bean.WlngTierBean</descriptor-bean-class>
</custom-resource>
<custom-resource>
<name>wlng-edr</name>
<target>AdminServer</target>
<descriptor-file-name>custom/wlng-edr.xml</descriptor-file-name>
<resource-class>com.bea.wlcp.wlng.management.descriptor.resource.WlngEdrResource</resource-class>
<descriptor-bean-class>com.bea.wlcp.wlng.management.descriptor.bean.WlngEdrBean</descriptor-bean-class>
</custom-resource>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>wlng.datasource</name>
<target>QualcommServer</target>
<descriptor-file-name>jdbc/wlng-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>wlng.localTX.datasource</name>
<target>QualcommServer</target>
<descriptor-file-name>jdbc/wlng-localTX-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
Thanks,
Srinu Babu P

Dear Nariharan,
Today I faced a simlar issue, and this SAP Note helped me fix it: 1966807 - Duplication of AET table records in change processing
In my case, cardinality of AET table was 1:1, and I was getting duplicate PARENT_ID every time when trying to create a subsequent service request for my activity.
Regards,
Andrew

Problem when I create a library automatically using a vi.

I create a library which contains a Shared Variable by the vi as the attachment shows, but the property of the autocreated Shared variable is not same with which I set in the vi, mainly in the propertys of Network.AccessType and Alarming.BadStatus.Enabled. But other propertys are same with which I set, What's wrong with this Vi?
LabVIEW 8.20程序设计从入门到精通已经出版，敬请关注！
欢迎访问LabVIEW学习乐园: http://labviewstudy.blog.edu.cn
Attachments:
Createlibrary.vi ‏40 KB

New problem: the created libarary cannot be deployed with the error: MyLibrary\My Variable deployment failed (error: -1967362041).
After you dobleclick every shared varaible and click ok(without any change), then the libarary can be deployed successful!
It's very strange to me, can anyone explain this?
LabVIEW 8.20程序设计从入门到精通已经出版，敬请关注！
欢迎访问LabVIEW学习乐园: http://labviewstudy.blog.edu.cn

Problem when WCS creates user guest access on the WLCs

Hello,
In my Wireless network, I have two appliances WLC 5508 running version 7.0.116.0.
I have a WCS running version 7.0.172.0, deployed on a windows 2003 server.
I've imported the two WLCs in my WCS in order to centralize the monitoring and the configuration tasks.
Now I'm facing an issue when I want to create a guest user from the WCS, rather than creating this user access on each WLC.
The creation of the user account is working good, the replication is done on the both WLCs, but on one of my WLC the guest user account is deleted after one hour(around).
On the second WLC, the same user account remains during all its life time.
In attachment a screen shot of the advanced parameter of the guest user.
You can see that the user was created on the both WLC but is only active on one ... and unfortunately the wrong because the AP is associated with the other WLC.
Any idea about this issue?
By advance thanks.

Thank you for sharing the info. I am glad that your issue is now fixed
Sent from Cisco Technical Support iPad App

Numeric character problems when creating spatial index

Hi,
We have run into a problem when trying to create spatial indexes. The problem seems to be that an mdsys-procedure tries to use a number with a comma as decimal symbol in an update statement
Error message:
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13249: Stmt-Execute Failure: begin mdsys.prvt_idx.execute_update(NULL,NULL,'set sdo_rtree_quality = 1,00000000 where UPPER(sdo_index_owner) = UPPER(''BK'') AND UPPER(sdo_index_name)=UPPER(''TEST_RTREE_IDX'') AND UPPER(sdo_index_table)=UPPER(''MDRT_8120$'')',NULL); end;
ORA-29400: data cartridge error
ORA-01747: invalid user.table.column, table.column, or column specification
ORA-06512: at "MDSYS.PRVT_IDX", line 17
ORA-06512: at line 1
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_9I", line 7
ORA-06512: at line 1
Our problem seems to be identical to the one discussed in this thread: create RTREE falied on 9.2.0.4
Regional settings, language versions etc:
Client:
OS: Windows 2000
Regional options (OS): Swedish, Sweden
Sqlplus (console and windows versions): v 9.2.0.1.0
Registry: NLS_LANG =SWEDISH_SWEDEN.WE8MSWIN1252
Server:
OS: Windows Server 2003
Regional options (OS): Swedish, Sweden
Oracle: v 9.2.0.3.0
Registry: NLS_LANG =SWEDISH_SWEDEN.WE8MSWIN1252
We have also tried building the indexes after overriding these settings by setting the environment variables NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1 on both the client- and the server computer. This gives exactly the same error. We have tried setting NLS_NUMERIC_CHARACTERS to '.,' instead of ',.', but this does not help either.
We haven't tried changing the NLS_LANG registry entry on the server, because this is a production server at a customer's site that hosts several other databases, so we would prefer not to have to restart it if we can avoid it. However, as we understand it, the environment variable NLS_LANG should override the registry setting anyway, right?
We first experienced the problem when trying to build indexes on imported data. To verify that the problem was not with the data, we wrote a simple test script that:
1)Creates a table
2)Creates metadata
3)Inserts a simple geometry
4)Tries to create an index
The error message above is from running this script. We have verified that the script
works ok on another database server.
Below are the values of some of the language parameters right before running the script
(we have tried many other settings with the same result).
parameter...........................db................................instance...............session
NLS_CHARACTERSET.......WE8MSWIN1252..................................................
NLS_LANGUAGE...............AMERICAN...................AMERICAN...........AMERICAN
NLS_NCHAR_CH...............AL16UTF16 ..........................................................
NLS_NCHAR_CONV... ......FALSE..........................FALSE..................FALSE..
NLS_NUMERIC_CH...---------.,---------------------------------------------------------------.,
NLS_TERRITORY..............AMERICA......................AMERICA..............AMERICA
The guy who started the thread referenced above solved the problem, but we haven't been able to get it working by changing registry entries and session parameters.
The question is: Which setting will make the number in 'set sdo_rtree_quality = 1,00000000...' be generated with a . instead of a , as decimal symbol?

Ok, so here is my plan to solve this:
1) Change the default user locale (the language under "standards and formats") to English for the account under which the Oracle server runs.
2) Reboot (or is there an easier way to make Oracle reload the settings?)
This should make the index creation work. It may break something else however, so to avoid this I can set the user locale back to Swedish afterwards .
You can subsequently change the setting and update the sdo_rtree_quality in
the metadata and it should work fine. Do you mean I have to update the sdo_rtree_quality in some way to make it work after I have changed the default user locale back to Swedish? How do I do this?
Thanks a million both of you!

ORA-00600 problem when create XMLType table with registerd schema

Hi,
I am using Oracle9i Enterprise Edition Release 9.2.0.4.0 on RedHat Linux 7.2
I found a problem when I create table with registered schema with follow content:
     <xs:element name="body">
          <xs:complexType>
               <xs:sequence>
               </xs:sequence>
               <xs:attribute name="id" type="xs:ID"/>
               <xs:attribute name="class" type="xs:NMTOKENS"/>
               <xs:attribute name="style" type="xs:string"/>
          </xs:complexType>
     </xs:element>
     <xs:element name="body.content">
          <xs:complexType>
               <xs:choice minOccurs="0" maxOccurs="unbounded">
                    <xs:element ref="p"/>
                    <xs:element ref="hl2"/>
                    <xs:element ref="nitf-table"/>
                    <xs:element ref="ol"/>
               </xs:choice>
               <xs:attribute name="id" type="xs:ID"/>
          </xs:complexType>
     </xs:element>
Does Oracle not support element reference to other element with dot?
For instance, body -> body.content
Thanks for your attention.

Sorry, amendment on the schema
     <xs:element name="body">
          <xs:complexType>
               <xs:sequence>
                    <xs:element ref="body.head" minOccurs="0"/>
                    <xs:element ref="body.content" minOccurs="0" maxOccurs="unbounded"/>
                    <xs:element ref="body.end" minOccurs="0"/>
               </xs:sequence>
               <xs:attribute name="id" type="xs:ID"/>
               <xs:attribute name="class" type="xs:NMTOKENS"/>
               <xs:attribute name="style" type="xs:string"/>
          </xs:complexType>
     </xs:element>

How to create secondry index on database table

how to create secondry index on database table

Hi
By trx SE11:
- Choose your table and press CHANGE ICON, so INDEX
When you create an index you should consider if your index is contained in another index.
If the fields of your index are:
- FIELD1, FLIED2, FIELD3
...it'll be triggered only if the select is:
SELECT * FROM <TABLE> WHERE FIELD1
                        AND FIELD2
                        AND FIELD3
A select like this
SELECT * FROM <TABLE> WHERE FIELD1
                        AND FIELD3
                        AND FIELD2
doesn't use your index.
Max

Error when creating spatial index in 10g

Hello.
I have a problen when I try to create a spatial index. The strange thing is that the same commands always works fine in some machines, but if always fails in others. I tryed in diferent versiones of Oracle, but I have the error in al of them. The versions I have tryed are:
- 10.2.0.1
- 10.2.0.4
The operating systems are:
Windows XP professional 32 bits
Windows 2003 Server 32 bits
These are the steps i make:
1) Create a Table with a SDO_GEOMETRY column (GEOMETRY)
2) Load data with SQLLDR (I hve tryed different SRID's, and all fail)
So far everything is ok
3) Create the INDEX
When I execute the CREATE INDEX command CREATE INDEX MADRID_SX ON MADRID (GEOMETRY) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
I obtain the error:
ERROR en linea 1:+
ORA-29855: se ha producido un error en la ejecucion de la rutina+
ODCIINDEXCREATE+
ORA-13282: fallo al inicializar la transformacion de coordenadas+
ORA-06512: en "MDSYS.SDO_INDEX_METHOD_10I", line 10+
I too have noticed that if I execute the next command, I have an error:
SELECT MDSYS.sdo_cs.transform(sdo_geometry(2001,8192,sdo_point_type(13.6,52.4,null),null,null),25830) from dual;
ERROR en linea 1:+
ORA-13282: fallo al inicializar la transformacion de coordenadas+
ORA-06512: en "MDSYS.SDO_CS", linea 75+
ORA-06512: en "MDSYS.SDO_CS", linea 112+
ORA-06512: en "MDSYS.SDO_CS", linea 2678+
And if I execute the next command, I too have another error:
SELECT SDO_CS.VALIDATE_WKT(25830) FROM DUAL;
FALSE (169)*
Any ideas? Could it be related with something inside the machines, user privileges, etc.?
Thanks in advance.

I have found that the problem is to use a SRID of AUTH_NAME column in MDSYS.CS_SRS table without the value "Oracle." in it.
If I use an Oracle’s SRID, everything works fine. If I use an EPSG’s SRID, fails.
For example, this command uses an Oracle SRID (8192) and one from the EPSG (25830), and fails:
SELECT MDSYS.sdo_cs.transform(sdo_geometry(2001,8192,sdo_point_type(13.6,52.4,null),null,null),25830) from dual;
ERROR en linea 1:
ORA-13282: fallo al inicializar la transformacion de coordenadas
ORA-06512: en "MDSYS.SDO_CS", linea 79
ORA-06512: en "MDSYS.SDO_CS", linea 116
ORA-06512: en "MDSYS.SDO_CS", linea 2690
However, if I use two Oracle SRID (8192 and 83030), it works.
SELECT MDSYS.sdo_cs.transform(sdo_geometry(2001,8192,sdo_point_type(13.6,52.4,null),null,null),83030) from dual;
SDO_GEOMETRY(2001, 83030, SDO_POINT_TYPE(1625183.71, 5936269.06, NULL), NULL, NULL
Therefore, the problem seems to be to use a non Oracle SRID.

Problems creating/altering index with certain Word docs

Hello,
I am having an odd problem when attempting to drop/create or alter my index after entering certain MS Word docs in my table.
Has anyone run into this? Does anyone have any insight as to which features in Word docs (e.g. macros, etc.) might cause this problem?
The errors are listed below (they also cause GPFs when extproc.exe runs). Thanks for your help.
Mike
alter index blobdoc_idx rebuild online parameters ( 'sync' )
ERROR at line 1:
ORA-29863: warning in the execution of ODCIINDEXCREATE routine
SQL> CREATE INDEX BLOBDOC_IDX
2 ON BLOBS(DOC_BLOB) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS('FILTER ctxsys.INSO_FILTER STORAGE
INTERMEDIASTORE LEXER INTERMEDIALEXER');
CREATE INDEX BLOBDOC_IDX
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: interMedia Text error:
ORA-28579: network error during callback from external procedure agent
ORA-06512: at "CTXSYS.DRUE", line 126
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 54
ORA-06512: at line 1

Additional information: error message found in CTXSYS.DR$INDEX_ERROR TABLE:
DRG-10595: ALTER INDEX BLOBDOC_IDX failed
ORA-28579: network error during callback from external procedure agent
Mike
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Michael Hoekstra ([email protected]):
Hello,
I am having an odd problem when attempting to drop/create or alter my index after entering certain MS Word docs in my table.
Has anyone run into this? Does anyone have any insight as to which features in Word docs (e.g. macros, etc.) might cause this problem?
The errors are listed below (they also cause GPFs when extproc.exe runs). Thanks for your help.
Mike
alter index blobdoc_idx rebuild online parameters ( 'sync' )
ERROR at line 1:
ORA-29863: warning in the execution of ODCIINDEXCREATE routine
SQL> CREATE INDEX BLOBDOC_IDX
2 ON BLOBS(DOC_BLOB) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS('FILTER ctxsys.INSO_FILTER STORAGE
INTERMEDIASTORE LEXER INTERMEDIALEXER');
CREATE INDEX BLOBDOC_IDX
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: interMedia Text error:
ORA-28579: network error during callback from external procedure agent
ORA-06512: at "CTXSYS.DRUE", line 126
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 54
ORA-06512: at line 1
<HR></BLOCKQUOTE>
null

Problem when i create an index

Similar Messages

Maybe you are looking for