Problem while copying Text from Jtext Area ..

I am trying to copy text from a JtextArea onto any Text Editor .. What happens is that the pasted text in the Text Editor eg : TextPad, JCreator etc .. has extra Carriage Return appended at the end of everyline (line separator to be exact).
Eg :- Actual Text on Text Area :
Executing PU for PMGS.................
Completed PMGS PU successfully.
- When Pasted on a Text Editor Blank Document becomes :
Executing PU for PMGS.................
Completed PMGS PU successfully.
I am not being able to understand how this extra CR (Carriage Return gets added .. Looking for an urgent solution to this problem ,,

rathor5 wrote:
When I am copying a song from my pc to lumia 620 . It automatically create 3 or 4 links of that song in "music+video" hub . I have already refreshed my phone but the problem is still persists.
Do you already have the amber update on your Lumia? Pre-amber solution for that is to perform a complete hard reset of the device - so make it sure to do a backup first.
Good luck

Similar Messages

  • A problem with copying text from english pdf to a word file

    i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
    i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

    Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

  • How can I solve the problem with copying text from Google Documents?

    Ctrl+C and Ctrl+X are not always working in Google Document opened with Mozilla Firefox 30. This problem first occurred 2 days ago. No changes to the software were made.
    The problem is not stable and permanent. I can successfully copy several lines from document and paste them somewhere else. And suddenly the next one is not copied using ctrl+c. Even ctrl+x is not working until I change the selection of the lines. Sometimes it begin to work after changing the selection, sometimes not.
    I'm using Google Documents for a long time. I always use Firefox to work with them. And I've never had this problem before.

    This problem happens for me as well. I can copy/paste from Firefox initially, but then after pasting elsewhere the Firefox page has to be refreshed in order to copy something else....

  • Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

    Hi
    I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
    The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
    This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
    What can I do?
    thank you a lot.

    There is no product called Adobe Acrobat Reader Pro. There is
    - Adobe Acrobat Pro ($$)
    - Adobe Reader (free)
    Which do you have? And are you a programmer?

  • How can i copy text from a pdf while in firefox?

    i no longer seem to be able to highlight and copy text from a pdf, while in firefox 33.0, using adobe to view pdfs.
    how do i turn on the select tool, so i can do this?

    When viewing a PDF with a browser you are using a browse add-on (Adobe's, Firefox's, or some other provider).
    An add-on is not the desktop application; add-ons do not provide the full functionality of the desktop application (Reader or Acrobat).
    To have full use of all Comment and Drawing Markup tools save the PDF to the local machine's HDD.
    Launch Adobe Reader XI (pre-XI releases do not have the full set of these tools).
    Open the PDF. Annotate as desired.
    Be well...

  • Problem copying text from word to dreamweaver

    Howdy..
    had a problem copying text from a word doc (07) to
    dreamweaver, for some strange reason it missed a complete section
    in the middle, 2 paragraphs gone... no errors... no blank spaces,
    just would not copy and paste the section, everything b4 and after
    was fine, the only way to correct this was to copy to
    textpad/notepad first and then recopy and paste..
    anybody have any ideas ?
    anyone seen this happen b4?
    cheers
    Pythagonal

    nope, there didnt seem to be any special formatting in the
    word doc, just a straight forward press release, two of them
    actually and they both had sections that didn't copy and paste.
    what was very strange was it was sections in the middle of
    the docs, and wasnt the same in both, was 2 different areas in
    each, just when u copy'd and pasted it gave nothing..
    and ive never seen anything like it b4,
    ive just upgraded to CS4 a few weeks back and this is the
    first time ive noticed it, ill keep my eye out and see if its
    somethng to do with the way word is formatting stuff..
    cheers
    Pythagonal

  • Error while copying data from infoprovider to planning area

    Hi,
    Error for COM routine using application program (return code 40,075)
    Message no. /SAPAPO/OM102
    Diagnosis
    An application program has called a COM routine. During the process, an error occurred.
    I got the above error while copying data from infoprovider to planning area using t code TSCUBE.
    How to resolve this?

    Hi,
    Is your issue resolved, If not please run MPOS consistency checks, Planning area consistency check and livecache consistency check.
    Below are the programs for the same.
    /SAPAPO/TS_lcm_cons_check
    /SAPAPO/TS_PSTRU_TOOL
    /SAPAPO/TS_PSTRU_CONS_CHECK
    Regards
    Kishore

  • How can I copy text from one card to another while creating cards using Iphoto?

    I created two cards with different pictures using Iphoto on Macnotebook. 
    I want to use the same text message.
    How can I copy text from one card to another?

    select the text and copy (edit menu ==> copy) tehn gpo to the next card and paste
    LN

  • Can't Copy Text From PDF Within Gmail Preview

    Hi,
    If I click on a pdf attachment while inside gmail, I get the expected preview window of that PDF. However, I can't copy text from it. If I press Command-C, it just makes a beeping noise letting me know nothing is being copied. If I select text and right-click, there's no 'copy' option. Also, in the top toolbar, Copy is greyed out in the Edit menu. However, if I just hold down Command-C for a couple seconds the text will copy anyways (while hearing a dozen audible beeps). I can copy text without issue using Firefox from the same PDF attachment preview inside Gmail.
    Thanks for any help.
    Yosemite 10.10.1
    Safari Version 8.0 (10600.1.25.1)

    Having same issue as well. I've had this problem pre-Yosemite and it seems to be Safari related. Copy to clipboard in Gmail preview works fine in Chrome & Firefox, just not Safari. As you indicated if you hold ctrl-c long enough it will eventually copy, just forces you to listen to the series of annoying bongs.
    Also there's no copy to clipboard in the context menu as illustrated below:
    http://i.imgur.com/adyyJO4.png
    Pretty annoying really, I'm not about to download a dozen attached PDFs to copy to clipboard, so now I'm sitting in the Delta lounge with my laptop bonging away as I wait for Safari to copy to clipboard and everyone looks at me like I'm a moron.
    NOTE: No I do not have acrobat or any other software loaded besides vanilla Safari. This has gone on on my MBP, Mac Pro and now this brand new MBP I got Monday as a company upgrade, it literally has nothing installed on it at the moment.

  • Copying text from CMIR (KNMT) to the Sales Order Line Item

    We need to copy text from the CMIR (KNMT) to the Sales Order Line Item with two steps in the access sequence. First to look up by the Ship to Partner Function.  If doesn't exist, then look up by Sold to Partner Function.  Have setup a new text id (ZPRN), a new access seq (9011).  The access seq has one seq =5 for KNMT, ZPRN, all languages and that saves fine.  When I set the Partner Function to be SH.  I get the following error msg:
    "The Language does not come from the partner function AG for MVKE".
    Any ideas?  This access seq does not reference MVKE. It only references KNMT.
    Thanks!

    Hi Lisa,
    Just stumbled on this post, as I am searching for something similar.
    What you are attempting to do isn't possible in config.
    This is because as standard Customer Material Info Records are not even considered for ship-to party in the sales order.
    They work for sold-to only.
    Therefore, this funny error message is SAP's way of saying, "Why are you trying to enter a partner here, because the data is determined for sold to only?"
    You can change this with development for other fields (ie, to determine delivery plant, tolerances etc at ship-to) by using
    the exit MV45AFZB with the USEREXIT_CUST_MATERIAL_READ form.
    However, even if you do this, Text Determination is still sold-to only and still doesn't behave.
    I am currently looking myself for a solution for this problem and I will let you know what I find.
    Cheers
    Chris

  • I can't copy text from safari

    I can't copy text from text page from safari.
    Copy seems copy, but paste, will paste the old text in tre buffer.
    Same problem in iphone4s and ipad2
    iOS 5.1

    Hi Carolyn,
    Thanks for your advice... My overall iPad performance is much mor "snappy" but here is what I get with a paste to this message:iPad 2 User Guide (For iOS 4.3 Software)
    Touch and hold the link. You can open the link in Safari or copy the link address to the clipboard .
    http://manuals.info.apple.com/en_US/ipad_2_user_guide.pdf
    And this was not what I was most recently copied to my clipboard while using Safari! Befor trying this copy/paste I even cleared Safari cookies and cache! Any other ideas would be appreciated.

  • Can't copy text from InDesign to other applications

    Hi there,
    Whenever I try to copy text from InDesign to any other applications, it simply fails. When I get to my text editor, email program, Illustrator or Photoshop, it's like the clipboard is empty.
    I'm able to copy shapes and other objects, though. I can also copy entire text boxes, but if I'm copying to Illustrator, for instance, all the lines of text are separated. It's treated as an object and is pretty useless for typical formatting needs.
    I'm on Mac OS X Mountain Lion, using InDesign CS5.
    Can anyone help?
    Thanks!

    Hi all,
    Thanks for replying!
    I tried unchecking "copy PDF", and also quit the only slightly-clipboard related app I use, Quicksilver, but it didn't fix the problem.
    Does anyone have any other ideas?

  • Copying text from pdf, "square" characters

    Using SQL 2005 standard edition.
    I have an issue with pdf generated reports. When copying text from the pdf (from a cell in a table row) the characters are just pasted as "squares" into notepad\word etc. Each character is just a small square. I am using Arial font and not doing anything outside of the norm. This is also an inconsistent problem, it doesnt happen on all cells\tables but only on particular ones. Could it be data specific?
    Anyone come across this before?

    It is not data specific but the format specific. There are many similar issues commonly encountered. The reason is that the format in the clipboard cannot be well recognized by notepad or word. You can refer to this article:
    http://support.microsoft.com/kb/212318
    From which you can read:"Microsoft Word does not directly support conversion from Adobe Portable Document Format (PDF). PDF is the format in which documents are saved for viewing and exchange in the Adobe Acrobat Reader and Adobe Acrobat Exchange for Windows."
    For those words if you could not copy/paste successfully, you may use some tools from Adobe company to extract the data from PDF file to some recognized format such as HTML. I know that there is a tool which can do this conversion:
    http://www.adobe.com/products/acrobat/access_onlinetools.html
    Hope this answers your question.Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Copy text from a PDF to word. Just get Symbols

    Hello,
    I have a public PDF with no Copying Restrictions. When I try to copy text from the PDF highlighted text to WORD I only get unreadable garbage.
    I can select the desired text and copy it into word but when I paste the text it is pasted like symbols and lines.
    I tried Special Paste and does not works. It says the font is a Gill Sans something (with numbers and so on), no really a font it seems but when i change it to Arial i still get symbols.
    Any help or ideas,
    Cheers,
    Sebastian

    I have this exact same problem.  It is very frustrating.  How is it not possible to "grab" onto the text in the pdf ??!!
    I am looking at it.  I can see it.  I can read it.
    I can highlight the individual letters and words with the mouse pointer. (So it's not just a "picture")
    With a pdf editor, I can even make the text bold, italic, or increase the font size.
    SO WHY CAN'T I COPY THE TEXT!   AAARGH!
    No, the file is not protected.
    Yes, I have tried saving as different formats.  (The "save as tiff file workaround" idea is  very time consuming and greatly degrades the quallity.)
    The font is shown as being: "Arial083.313"
    Something in the pdf program is recognizing the text, translating the 1's and 0's (that make up all computer files) into the letters that display on the screen that I can read and select with the mouse. So why can't that same "something" allow me to copy it?  So frustrating.
    Somebody please help.  If you can solve this problem you are awesome.

  • Copy text from PO to SO

    Hi All,
    Is it possible to copy text from the Purchase Order to Sales Order? I checked the Tcode VOTXN i do not see any text definitions in there for PO. Also I realized the text objects are not the same for PO and SO. Can any one confirm if the text copy is possible from PO to SO please?
    I looked in SDN posts but did not find any helpful ones. Any suggestions are much appreciated.
    Thank in advance,
    Karuna.

    Hi
    Yes u can do it.
    I don't believe it's possible to link PO texts to SO texts, but perhaps it can create a routine in order to get the text from PO and copy to SO.
    Anyway if it can use the abose solution I can give you this my experience:
    In my enviroment there's an external system creates the sales order via BAPI, he problem was some time the texts weren't formatted well, so I've inserted the following lines in a user-exit USEREXIT_SAVE_DOCUMENT_PREPARE in order to format the text again:
    IF VBAK-VBELN IS INITIAL. "If sales order is being created
        SELECT SINGLE SPRAS FROM KNA1 INTO TXT_LANG
          WHERE KUNNR = VBAK-KUNNR.
        TEXT_NAME = 'XXXXXXXXXX'.
      CALL FUNCTION 'READ_TEXT'        "Read text                   
        EXPORTING
          ID                      = ID
          LANGUAGE                = LANGUAGE
          NAME                    = NAME
          OBJECT                  = OBJECT
        IMPORTING
          HEADER                  = HEADER
        TABLES
          LINES                   = TLINES
        EXCEPTIONS
          ID                      = 1
          LANGUAGE                = 2
          NAME                    = 3
          NOT_FOUND               = 4
          OBJECT                  = 5
          REFERENCE_CHECK         = 6
          WRONG_ACCESS_TO_ARCHIVE = 7
          OTHERS                  = 8.
      IF SY-SUBRC <> 0.
        EXIT.
      ENDIF.
      REFRESH TEXT_STREAM.
      LOOP AT TLINES.
        APPEND TLINES-TDLINE TO TEXT_STREAM.
      ENDLOOP.
      IF SY-SUBRC <> 0.
        EXIT.
      ENDIF.
      REFRESH TLINES.
      CALL FUNCTION 'CONVERT_STREAM_TO_ITF_TEXT'
        TABLES
          TEXT_STREAM = TEXT_STREAM
          ITF_TEXT    = TLINES.
      CALL FUNCTION 'SAVE_TEXT' " Save text
        EXPORTING
          HEADER   = HEADER
        TABLES
          LINES    = TLINES
        EXCEPTIONS
          ID       = 1
          LANGUAGE = 2
          NAME     = 3
          OBJECT   = 4
          OTHERS   = 5.
      IF SY-SUBRC <> 0.
        EXIT.
      ENDIF.
      ENDIF.
    In this situation I've got a text transfered via BAPI and changed it, but perhaps u can read the text from PO and transfer it to SO
    Max

Maybe you are looking for