Problem while creating Data connection In ABAP......

Hi Experts,
I am tryning to create a adobe form in which i need to create a data connection using a WSDL file. But i am coing across the problem as cannot find the path of th url.
i tried to create the WSDL in 2 ways and i came across the same error.:
1) using the URL of the WSDL file generated
2)alos saved the file as WSDL file on desktop, and used to create
in both cases i am coming across the same error.
Note: i am not creating using webdynpro, i am doing using ABAP.
Regards,
Madhu

Hi Deepthi,
Also check the error message(long text) and paste it here...
check if you are either creating a "second" Delta DTP ( if an existing Delta DTP exists, then system will not allow you create a second DTP) and will throw an "overlapping" error
Hope this helps
Thanks
Kalyan

Similar Messages

Problem while creating JCA connection to MDM server

Hi All,
I have restarted my mdm connector(com.sap.mdm.tech.connector) along with the applications related to Enrichment Controller. All applications restarted successfully. After that I tried accessing the URL
http://MDMSERVER:50000/MDM_EnrichmentController/WorkflowPolling?process=Monitor
but I am getting following exception in this page
Polling Repository
    name=Vijaybabu_Repo_on_MDMSERVER, status=No repository connection, error description=com.sap.mdm.net.ConnectionException: Problem while creating JCA connection to MDM server MDMSERVER
        Enrichment Request Threads
Could somebody help me pointing if something I have missed..
Thanks and Regards,
Manoj

hi Swarna,
I have verified the repository and found 0 fatal errors, 0 non-fatal erros and 0 warnings. I also checked the MDM Factory and Connector service is running fine.
The detailed exception is
Sep 2, 2008 12:49:40 PM com.sap.mdm.logging.MdmLogger error
SEVERE: Problem while creating JCA connection to MDM server 'KOLAPON'
com.sap.mdm.net.ConnectionException: Can not resolve JCA connection
     at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnection(JcaConnectionUtil.java:119)
     at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnectionAccessor(JcaConnectionUtil.java:62)
     at com.sap.mdm.internal.session.JcaConnectionAccessor.reserveConnection(JcaConnectionAccessor.java:70)
     at com.sap.mdm.internal.session.JcaConnectionAccessor.reserveConnection(JcaConnectionAccessor.java:59)
     at com.sap.mdm.repository.commands.GetRepositoryStatusCommand.execute(GetRepositoryStatusCommand.java:67)
     at com.sap.mdm.enrichment.common.ECAdminUtils.getRepositoryStatus(ECAdminUtils.java:125)
     at com.sap.mdm.enrichment.common.EnrichmentUtils.validateRepostiryConfiguration(EnrichmentUtils.java:889)
     at com.sap.mdm.enrichment.common.EnrichmentUtils.getCatalogManager(EnrichmentUtils.java:144)
     at com.sap.mdm.enrichment.workflowpolling.PollingThread.getCatalogManager(PollingThread.java:166)
     at com.sap.mdm.enrichment.workflowpolling.PollingThread.run(PollingThread.java:102)
Caused by: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: "ConnectionManager" is closed. Possible reasons: 1) connector "MDM Factory" is stopped or not started, 2) Connector service is stopped or has not been started.
     at com.sap.mdm.connector.connection.MdmConnectionFactory.getConnectionEx(MdmConnectionFactory.java:223)
     at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnection(JcaConnectionUtil.java:108)
     ... 9 more
Caused by: com.sap.engine.services.connector.exceptions.BaseResourceException: "ConnectionManager" is closed. Possible reasons: 1) connector "MDM Factory" is stopped or not started, 2) Connector service is stopped or has not been started.
     at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:122)
     at com.sap.mdm.connector.connection.MdmConnectionFactory.getConnectionEx(MdmConnectionFactory.java:213)
     ... 10 more
Regards,
Manoj
Edited by: Manoj Kumar Nanda on Sep 2, 2008 9:21 AM

Problem while creating data transfer process

Hi friends
I am using BI 7.0 version.
I m getting a problem while creating dtp
After activating DTP and selecting the execute button, I am getting the following error message:
Request cannot be processed in its current state
Messg no : RSBK209
can anyone help me on this problem
Thank

Hi Deepthi,
Also check the error message(long text) and paste it here...
check if you are either creating a "second" Delta DTP ( if an existing Delta DTP exists, then system will not allow you create a second DTP) and will throw an "overlapping" error
Hope this helps
Thanks
Kalyan

Problem While creating DB connect source system to BW

Hi Guys,
While Creating DB sourc system in BW.The source system was not creating.
Sorcesystem-Create- selected the DB source system
Logical system: TAXIA03TST
Description:For Testing
DBMS:ORA
Username:
Pass word:
Given the ORA user name and password
Connection info:TAXIA03TST
After that it was saved.
After that it was going to the pop up screen Sytem log ,correct ,cancel
whe i select the correct,the source system was not created.
Can anybody help me out in creating the DB dource system.As it was very urgent.
points will be awarded.
Thanks,
Venkat

Hi,
This may help you to some extent:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40
Please check the SAP Note 339092
regards,
Pruthvi R

Problem while creating Item Data in OCA application

Hello Experts!
I am creating a PDA application (OCA) for NW7.1.
I am facing problem while creating Sales Order. I can create the Header structure. But when I Create the corresponding item structure for the header , the items are not getting created. After Sync I can only see the header structure in the middleware.
I am using the following code to create the header and item.
OrderCreateDocType header = model.createOrderCreateDocType();
header.setRefdoctype("41001180");
header.setDocType("ZRRJ");
header.setSalesOrg("AND");
wdContext.nodeOrderCreateDocType().bind(Collections.singleton(header));
OcaRoot.getInstance().commit();
wdContext.nodeOrderCreateDocType().setLeadSelection(0);
header=(OrderCreateDocType)wdContext.nodeOrderCreateDocType().getCurrentElement().model();
OrderCreateOrderItemsIn items = header.createNewOrderItemsIns();
long item = new Long("000010").longValue();
items.setItmNumber(item);
items.setMaterial("MMKT090114");
items.setPlant("ANDP");
items.setTargetQty(new BigDecimal(7));
items.setTargetQu("IT");
header.setOrderItemsIns(Collections.singleton(items));
OcaRoot.getInstance().commit();
Am I missing out on step.
Reply Awaited
Regards
Priya Ghosh

Hello Priya
in your case as the DOs are of upload only type, you are not able to create a
child on an already created header, because updates are not allowed for upload only DOs.
So in this case you first have to create an instance of the header first and then create an item. And only after this call a commit on the model
Best Regards
Vaidehi

Error while creating data warehouse tables.

Hi,
I am getting an error while creating data warehouse tables.
I am using OBIA 7.9.5.
The contents of the generate_clt log are as below.
>>>>>>>>>>>>>>>>>>>>>>>>>>
Schema will be created from the following containers:
Oracle 11.5.10
Universal
Conflict(s) between containers:
Table Name : W_BOM_ITEM_FS
Column Name: INTEGRATION_ID.
The column properties that are different :[keyTypeCode]
Success!
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
There are two rows in the DAC repository schema for the column and the table.
The w_etl_table_col.KEY_TYPE_CD value for DW application is UNKNOWN and for the ORA_11i application it is NULL.
Could this be the cause of the issue? If yes, why could the values be different and how to resolve this?
If not, then what could be the problem?
Any responses will be appreciated.
Thanks and regards,
Manoj.

Strange. The OBIA 7.9.5 Installation and Configuration Guide says the following:
4.3.4.3 Create ODBC Database Connections
Note: You must use the Oracle Merant ODBC driver to create the ODBC connections. The Oracle Merant ODBC driver is installed by the Oracle Business Intelligence Applications installer. Therefore, you will need to create the ODBC connections after you have run the Oracle Business Intelligence Applications installer and have installed the DAC Client.
Several other users are getting the same message creating DW tables.

Getting prob while creating view in webdynpro ABAP application

Hi Guys,
I am facing a problem while creating a view for webdynpro ABAP application. It is giving an error as "ICF service "/sap/public/bc/WebDynpro/ViewDesigner" inactive".
can anybody let me know how to solve this problem.
Thanks In Advance
Regards
Ravikumar

I think check Internet explorer Tools ->Internet Options ->Connections.>Lan Connections> if the proxy or anyting checkbox is clicked coz it doesn't work with Internet on .
Please reward if useful.

Date Format issue while creating date parameter

While creating date parameter in the crystal reports 2008 with SQL Server 2008 database connection, I want to change the date format according to the specified format in the database.
For ex: YYYY/MM/DD and MM/DD/YYYY
This paramter will be editable in the viewer i.e. I'm going to provide option to the user to change start date and end date for data selection.
Please help!
Thanks in Advance!

i found this
i am trying to get the Enter Values screen for parameters to allow entry in a specific format 'DD-MON-RRRR' connecting to an Oracle database. I found that a hack is possible yet I would prefer a clean solution that wont need files changing on client machines. The hack involved changing some javascript files within the Crystal Reports directory. The problem is I now have the date from the calendar in the correct format but it displays the following prompt: Please enter DateTime in format "dd/mm/yyyy hh:mm:ss".
Is there a way to supress this or better yet a way to specify date format without changing the javascript files of Crystal Reports.
I am using Crystal Reports 2008 SP1.
answer---
Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:

Problem while retrving data from a view

Hi Friends
i have a problem while retriving data from a view <b>v_t685a</b>.
the error message is :""" "V_T685A" is not defined in the ABAP Dictionary as a table, projection view or database view."""
i wrote : select single VTEXT1 from V_T685A into w_cst_jin1 where
                    KSCHL = 'JIN1' and
                    KAPPL = 'V'.
how to retrive the data.
waiting for quick response
Regards
Mukesh

Hi
This is a Maintenance View, not a Database View
SO can't fetch data using select statement.
You can use the Table <b>T685</b> directly to fetch the condition Types data straight away instead of the view. write the same select for this table and use.
Regards
Anji
Message was edited by:
        Anji Reddy Vangala

Error while creating OLAP connection in IDT

Hi friends,
I am facing error while creating OLAP connection in IDT (BO 4.1 sp2)
I am using sql server 2012.In the screen shots you can observe server name and user name of the Sql server
I am creating OLAP connection to connect CUBE
Check the screen shots for the error
Plz help me
Here you can see the server name and user name
While creating OLAP connection I gave these credentials
This is the error I am getting

Hi..
To create connection and access the BW data, developer must have the password. and while create connection using Authentication Mode: Single Sign On, need to loin the username has pattern <SID~client/SAP userid>,
User Name: SID~client/SAP userid
Password for the SID,
Authentication as SAP.
Plese find the below link for more info: http://scn.sap.com/community/semantic-layer/blog/2014/06/19/pre-requisite-authorizations-in-sap-bw-side-before-develop-the-universe

Not enough memory for Data Provider-Error while creating Data Source

Hi,
I am loading data into Master Data_Attribute InfoObject I am getting following error message while creating Data Source under "Proposal" Tab
"Not enough memory for Data Provider"
My Master Data InfoObject having 65 attributes
My CSV file having 15,00000 records
I am using BI 7.0 version
If anybody faced this problem. Please share with me
Thanks.

Hi
Here the problem with the space so plz contact ur BASIS people to increase the spae for particular object.

Problem while creating Service order

Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.

Hi Murgesh,
If GL code is not getting bydefault from the system it is needed to be provided by the user.
If normally one GL is there or other than master data services if single GL is there u can set that in SPRO.
it is avalible in deafult settings in order node
If you are creating the order with refrence to PR then it will take account assignement as "F" system will pick up all the details from PM module. This is the integration of MM & PM module.
But if your PO is not w.r.t. PM orders PR then needs to be given manully.
Ramesh
Edited by: RameshChandra Soni on Jul 25, 2008 8:16 AM

Problem while creating script form - lang EN is not available in client 800

Hi friends,
I getting a problem while creating a script form in SE71.
if I give the name of the script (zform1) and clicked on create then its giving an information message like " Form ZFORM1 language EN is not available in client 800".
But if I use this form in the abap program its giving stop message "Form ZFORM1 language EN is not active and has no errors" and the control is coming out of the program.
What could be the problem and how to solve it friends . Please help me.
Thanks
-Hima

Hi There,,
By default all the forms will be there in client 100, if you are using the exisiting form and making a Z copy of the same,, then first you will have to copy from the client 100 to 800.
If you are creating the form right from the scratch,, you will that message,,but need now worry about that..
go head and create the Zform, don't forget to activate the form, before calling in the driver program.
In the driver program,, call the function modules to invoke the form and activate the driver program as well. then you are all set/
Thanks-
Rahul

Problem while reading data from Serial Port

Hi All,
I am facing some problem while reading data from Serial Port.
As per the requirement I am writing the data on Serial Port and waiting for response of that data.
Notification for data availabilty is checked with method public void serialEvent(SerialPortEvent event) of javax.comm.SerialPortEventListener.
When we are writing data on the port one thread i.e. "main" thread is generated and when data availability event occures another thread "Win32SerialPort Notification thread" is generated. This creates problem for me as we can't control thread processing.
So can anybody pls explain me how to overcome this problem?
Regards,
Neha

My Problem is:-
I am simoultaneouly wrting data on port & reading data from port.
First I write data on port using outputStream.write() method. Now when target side sends me response back for the request on serial port DATA_AVAILABLE of SerialPortEventListner event occured,we are reading data from serial port.Now till the time we didn't get the response from target next command can't be written on the serial port. When we are writing data on port main thread is executed.Now my problem starts when DATA_AVAILABLE event occured.At this point another thread is created.Due to this my program writes data of next command without reading response of previous command.To solve this prob. I have used wait() & notify() methods as follows.But again due to this my pc hangs after execution of 2 commands. (PC hang in while loop in a code provided below.)
From SOPs I could figure it out that after 2 commands we are not able to write data on serial port so DATA_AVAILABLE event doesn't occure n pro. goes in wait state.
Can anybody help me to solve this issue.
Neha.
Code:
public void serialEvent(SerialPortEvent event)
          switch (event.getEventType())
               case SerialPortEvent.BI:
               case SerialPortEvent.OE:
               case SerialPortEvent.FE:
               case SerialPortEvent.PE:
               case SerialPortEvent.CD:
               case SerialPortEvent.CTS:
               case SerialPortEvent.DSR:
               case SerialPortEvent.RI:
               case SerialPortEvent.OUTPUT_BUFFER_EMPTY:
                             break;
               case SerialPortEvent.DATA_AVAILABLE:
                    try
                         dataThread = Thread.currentThread();
                         dataThread.setPriority(10);
                         dataAvailable = true;
                                                                                byte[] tempArray=new byte[availableBytes];
                                    inputStream.read(tempArray);
                                                                   catch (IOException io)
                         SOP(io, "Error in serialEvent callback call for event DATA_AVAILABLE");
public void writetoPort(byte[] data) throws IOException
                         outputStream.write(data);
                          while(finalTimeOut >= actualTime)
                        if( ! dataAvailable)
                                actualTime = System.currentTimeMillis();
                       else
          synchronized (mainThread)
               mainThread = Thread.currentThread();
               mainThread.wait();
public void sendDatatoUser(byte[] b) throws Exception, HWCCSystemFailure
          obj.returnData(b);
          synchronized(mainThread)
               mainThread.notify();

Problem while importing data schema not found

Hi,
I'm facing problem while importing data through system to a schema and impdp gives me error that schema XYZ was not found but when I query dba_users schema exist there what could be the reason of this.
Regards,
Abbasi

Hi,
Here is complete listing
bash-3.2$ impdp system/abc schemas=XYZ DIRECTORY=data_dir DUMPFILE=Today_dump.dmp LOGFILE=Today_log.log PARALLEL=8
Import: Release 11.1.0.7.0 - 64bit Production on Friday, 07 January, 2011 11:18:57
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39002: invalid operation
ORA-39165: Schema XYZ was not found.
Regards,
Abbasi

Problem while creating Data connection In ABAP......

Similar Messages

Maybe you are looking for