Problem while creating with QUAN and CURR data type fields
I am trying to create a Z table. A couple of fields are of data type QUAN and CURR, which need to have reference table and reference field.
Field DataType Length Decimal
TOT_QTY QUAN 15 3
PRICE CURR 16 2
For reference table and fields, I found a Table HRPAD23 which has a field called N_QUANTITY (15,3) that matches my TOT_QTY field's data type and it also has a field called UN_PRICE that matches my PRICE field's data type. But when I use them as reference, and try to activate the table, I get an error "combination reference table/field does not exist". How do I fix this? Can anybody help me? Thanks in advance.
Chris
Edited by: martin99 on Aug 18, 2011 9:16 PM
Martin,
I doubt that you need to add 2 extra fields in your table as suggested in the last post by John.
Your error is very CLEAR that you seem to be use wrong combination of reference table and field.
For QTY field,
use ref table - HRPAD23. ref field- UNIT
OR
ref table - VBAP ref field - VRKME
For PRICE field,
use ref table - PAD25 ref field - KWAER
OR
ref table - T77REFDOC ref field - CURRENCY
It should work.
BR,
Diwakar
Similar Messages
-
Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ... -
Problem while creating xml with cdata section
Hi,
I am facing problem while creating xml with cdata section in it. I am using Oracle 10.1.0.4.0 I am writing a stored procedure which accepts a set of input parameters and creates a xml document from them. The code snippet is as follows:
select xmlelement("DOCUMENTS",
xmlagg
(xmlelement
("DOCUMENT",
xmlforest
(m.document_name_txt as "DOCUMENT_NAME_TXT",
m.document_type_cd as "DOCUMENT_TYPE_CD",
'<![cdata[' || m.document_clob_data || ']]>' as "DOCUMENT_CLOB_DATA"
) from table(cast(msg_clob_data_arr as DOCUMENT_CLOB_TBL))m;
msg_clob_data_arr is an input parameter to procedure and DOCUMENT_CLOB_TBL is a pl/sql table of an object containing 3 attributes: first 2 being varchar2 and the 3rd one as CLOB. The xml document this query is generating is as follows:
<DOCUMENTS>
<DOCUMENT>
<DOCUMENT_NAME_TXT>TestName</DOCUMENT_NAME_TXT>
<DOCUMENT_TYPE_CD>BLOB</DOCUMENT_TYPE_CD>
<DOCUMENT_CLOB_DATA>
<![cdata[123456789012345678901234567890123456789012]]>
</DOCUMENT_CLOB_DATA>
</DOCUMENT>
</DOCUMENTS>
The problem is instead of <![cdata[....]]> xmlforest query is encoding everything to give < for cdata tag. How can I overcome this? Please help.SQL> create or replace function XMLCDATA_10103 (elementName varchar2,
2 cdataValue varchar2)
3 return xmltype deterministic
4 as
5 begin
6 return xmltype('<' || elementName || '><![CDATA[' || cdataValue || ']]>
7 end;
8 /
Function created.
SQL> select xmlelement
2 (
3 "Row",
4 xmlcdata_10103('Junk','&<>!%$#&%*&$'),
5 xmlcdata_10103('Name',ENAME),
6 xmlelement("EMPID", EMPNO)
7 ).extract('/*')
8* from emp
SQL> /
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[SMITH]]></Name>
<EMPID>7369</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[ALLEN]]></Name>
<EMPID>7499</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[WARD]]></Name>
<EMPID>7521</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[JONES]]></Name>
<EMPID>7566</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[MARTIN]]></Name>
<EMPID>7654</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[BLAKE]]></Name>
<EMPID>7698</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[CLARK]]></Name>
<EMPID>7782</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[SCOTT]]></Name>
<EMPID>7788</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[KING]]></Name>
<EMPID>7839</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[TURNER]]></Name>
<EMPID>7844</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[ADAMS]]></Name>
<EMPID>7876</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[JAMES]]></Name>
<EMPID>7900</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[FORD]]></Name>
<EMPID>7902</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[MILLER]]></Name>
<EMPID>7934</EMPID>
</Row>
14 rows selected.
SQL> -
Problem while Creating MVLOG with synonym in Oracle 9i:Is it an Oracle Bug?
Hi All,
I am facing a problem while Creating MVLOG with synonym in Oracle 9i but for 10G it is working fine. Is it an Oracle Bug? or i am missing something.
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
2 REFRESH ON DEMAND
3 WITH PRIMARY KEY
4 AS
5 SELECT name,id
6 FROM syn_t;
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
2 WITH PRIMARY KEY
3 (name)
4 INCLUDING NEW VALUES;
Materialized view log created.
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE 9.2.0.6.0 Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
REFRESH ON DEMAND
WITH PRIMARY KEY
AS
2 3 4 5 SELECT name,id
FROM syn_t; 6
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
WITH PRIMARY KEY
(name)
INCLUDING NEW VALUES; 2 3 4
CREATE MATERIALIZED VIEW LOG ON MV_t
ERROR at line 1:
ORA-12014: table 'MV_T' does not contain a primary key constraintRegards
Message was edited by:
Avinash Tripathi
nullHi Nicloei,
Thanks for the reply. Actually i don't want any work around (Creating MVLOG on table rather than synonym is fine with me) . I just wanted to know it is actually an oracle bug or something else.
Regards
Avinash -
[URGENT] Performance problem with BC4J and partioned data
Hi all,
I have a big performance probelm with BC4J and partitioned data. As as partitioned table shouldn't have a primary key like a sequence (or something else) my partitioned table doesn't have any primary key.
When I debug my BC4J application I can see a message showing me "ignoring row with no primary key" from EntityCache. It takes a long time to retrieve my data even if I use the partition keys. A quick & dirty forms application was multiple times faster!
Is this a bug in BC4J, or is BC4J not suitable for partitioned data? Can anyone give me a hint what to do, do make the BC4J application fast even with partitioned data? In a non-partitioned environment the application works quite well. So it seams that it must be an "error" somewhere in this part.
Thanks,
AxelHere's a SQL statement that creates the table.
CREATE TABLE SEARCH
(SEAR_PARTKEY_DAY NUMBER(4) NOT NULL
,SEAR_PARTKEY_EMP VARCHAR2(2) NOT NULL
,SEAR_ID NUMBER(20) NOT NULL
,SEAR_ENTRY_DATE TIMESTAMP NOT NULL
,SEAR_LAST_MODIFIED TIMESTAMP NOT NULL
,SEAR_STATUS VARCHAR2(100) DEFAULT '0'
,SEAR_ITC_DATE TIMESTAMP NOT NULL
,SEAR_MESSAGE_CLASS VARCHAR2(15) NOT NULL
,SEAR_CHIPHERING_TYPE VARCHAR2(256)
,SEAR_GMAT VARCHAR2(1) DEFAULT 'U'
,SEAR_NATIONALITY VARCHAR2(3) DEFAULT 'XXX'
,SEAR_MESSAGE_ID VARCHAR2(32) NOT NULL
,SEAR_COMMENT VARCHAR2(256) NOT NULL
,SEAR_NUMBER_OF NUMBER(3) NOT NULL
,SEAR_INTERCEPTION_SYSTEM VARCHAR2(40)
,SEAR_COMM_PRIOD_H NUMBER(5) DEFAULT -1
,SEAR_PRIOD_R NUMBER(5) DEFAULT -1
,SEAR_INMARSAT_CES VARCHAR2(40)
,SEAR_BEAM VARCHAR2(10)
,SEAR_DIALED_NUMBER VARCHAR2(70)
,SEAR_TRANSMIT_NUMBER VARCHAR2(70)
,SEAR_CALLED_NUMBER VARCHAR2(40)
,SEAR_CALLER_NUMBER VARCHAR2(40)
,SEAR_MATERIAL_TYPE VARCHAR2(3) NOT NULL
,SEAR_SOURCE VARCHAR2(10)
,SEAR_MAPPING VARCHAR2(100) DEFAULT '__REST'
,SEAR_DETAIL_MAPPING VARCHAR2(100)
,SEAR_PRIORITY NUMBER(3) DEFAULT 255
,SEAR_LANGUAGE VARCHAR2(5) DEFAULT 'XXX'
,SEAR_TRANSMISSION_TYPE VARCHAR2(40)
,SEAR_INMARSAT_STD VARCHAR2(1)
,SEAR_FILE_NAME VARCHAR2(100) NOT NULL
PARTITION BY RANGE (SEAR_PARTKEY_DAY, SEAR_PARTKEY_EMP)
PARTITION SEARCH_MAX VALUES LESS THAN (MAXVALUE, MAXVALUE) MIRA4_SEARCH_EVEN
);of course SEAR_ID is filled by a sequence but the field is not the primary key as it would decrease the performance of partitioned data.
We moved to native JDBC with our application and the performance is like we never expected to be! -
My website created with Iweb and hosted on mobileMe is not uploading well on all computers. What could be the problem ?
I got a chance to look at it on a PC. Totally hosed up. It loads incorrectly then parts of it go blank.
I have a site that is based very much on one of the built-in templates and it works fine on the same PC. It contains only text boxes, image placeholders, and images with "picture frame" borders. Nothing fancy, no overlays, no extra code or anything. I haven't looked much at the other templates so I don't know if yours is mostly a template or how much you may have modified one or what tricks you may have done to get the look you wanted. Whatever it is, IE does not like it. Unfortunately, you can't really ignore them as was suggested; they make up a large part of your audience. -
Problem while creating data transfer process
Hi friends
I am using BI 7.0 version.
I m getting a problem while creating dtp
After activating DTP and selecting the execute button, I am getting the following error message:
Request cannot be processed in its current state
Messg no : RSBK209
can anyone help me on this problem
ThankHi Deepthi,
Also check the error message(long text) and paste it here...
check if you are either creating a "second" Delta DTP ( if an existing Delta DTP exists, then system will not allow you create a second DTP) and will throw an "overlapping" error
Hope this helps
Thanks
Kalyan -
Problem while creating Item Data in OCA application
Hello Experts!
I am creating a PDA application (OCA) for NW7.1.
I am facing problem while creating Sales Order. I can create the Header structure. But when I Create the corresponding item structure for the header , the items are not getting created. After Sync I can only see the header structure in the middleware.
I am using the following code to create the header and item.
OrderCreateDocType header = model.createOrderCreateDocType();
header.setRefdoctype("41001180");
header.setDocType("ZRRJ");
header.setSalesOrg("AND");
wdContext.nodeOrderCreateDocType().bind(Collections.singleton(header));
OcaRoot.getInstance().commit();
wdContext.nodeOrderCreateDocType().setLeadSelection(0);
header=(OrderCreateDocType)wdContext.nodeOrderCreateDocType().getCurrentElement().model();
OrderCreateOrderItemsIn items = header.createNewOrderItemsIns();
long item = new Long("000010").longValue();
items.setItmNumber(item);
items.setMaterial("MMKT090114");
items.setPlant("ANDP");
items.setTargetQty(new BigDecimal(7));
items.setTargetQu("IT");
header.setOrderItemsIns(Collections.singleton(items));
OcaRoot.getInstance().commit();
Am I missing out on step.
Reply Awaited
Regards
Priya GhoshHello Priya
in your case as the DOs are of upload only type, you are not able to create a
child on an already created header, because updates are not allowed for upload only DOs.
So in this case you first have to create an instance of the header first and then create an item. And only after this call a commit on the model
Best Regards
Vaidehi -
CRM BDoc Modeler - Problem while creating a new segment
Hi all;
I have created a new BDoc type and wanted to add a segment. I imported a structure with some QUAN fields and a UNIT type fields. While activating segment, I got an error. I saw that the structure was not activated since I used some QUAN type fields and they were not assigned a UNIT type field. But the assignment was already done in the structure I imported. Is there a solution to use QUAN fields in segment definitions or what data element should I use instead of them?
Thanks for your answers in advance;
HakanHi all;
I have created a new BDoc type and wanted to add a segment. I imported a structure with some QUAN fields and a UNIT type fields. While activating segment, I got an error. I saw that the structure was not activated since I used some QUAN type fields and they were not assigned a UNIT type field. But the assignment was already done in the structure I imported. Is there a solution to use QUAN fields in segment definitions or what data element should I use instead of them?
Thanks for your answers in advance;
Hakan -
Problem while creating Service order
Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.Hi Murgesh,
If GL code is not getting bydefault from the system it is needed to be provided by the user.
If normally one GL is there or other than master data services if single GL is there u can set that in SPRO.
it is avalible in deafult settings in order node
If you are creating the order with refrence to PR then it will take account assignement as "F" system will pick up all the details from PM module. This is the integration of MM & PM module.
But if your PO is not w.r.t. PM orders PR then needs to be given manully.
Ramesh
Edited by: RameshChandra Soni on Jul 25, 2008 8:16 AM -
Problem while creating WBS elements using LSMW
Hello experts,
I am able to create Project Definitions using LSMW. (using recording)
But there is a problem while creating WBS elements.
Tcode CJ20 has table control and that will become problem for multiple rows (levels).
Can anyone suggest a solution to mass upload WBS elements?
Thanks for your valuable advice.Hi,
Instead of using "BAPI_PROJECT_MAINTAIN", use following solution. We are using this solution and it is working pretty good.
If the WBS element is already created and you want to create one more with same data, first get the WBS related information using BAPI_PROJECT_GETINFO as you are doing currently.
I am using different sets of BAPIs to create project, create / change WBS element.
I use function module from Function group CJ2001 ( Project related BAPIs ), CJ2054 ( WBS related BAPIs ) and PS_BAPI ( pre/post processing BAPIs ). There are specific order in which you need to execute these BAPIs.
For example if you want to create / change the WBS element, the BAPIs sequence is:
<b>1. BAPI_PS_INITIALIZATION
2. BAPI_BUS2054_CREATE_MULTI ( to create WBS )
or
2. BAPI_BUS2054_CHANGE_MULTI ( to change WBS )
3. BAPI_PS_PRECOMMIT
4. BAPI_TRANSACTION_COMMIT</b>
Check the documentation of BAPI "BAPI_BUS2054_CREATE_MULTI " to see how these function modules work.
Let me know if you need further information.
Regards,
RS -
Problem while creating sales order
Hi
We are facing a problem while creating a sales order in R/3. The sales order number is getting generated. But we are not able to view the same in the backend meaning it is not there in the database. Any inputs would be of help.
regs
SteveHi everybody,
I've got a problem with this too. I use the BAPI_SALESORDER_CREATEFROMDAT2 with BAPI_TRANSACTION_COMMIT and the webdynpro shows me the document number created in R3 with a Success message. But when I go to R3 and try to display the created sales order, it doesn't exists. So... Maybe I'm doing something wrong with the BAPI_TRANSACTION_COMMIT. ¿Can anybody help me with this?
The code I use is this:
When the user pushes the SAVE button in the WebDynpro, this code executes:
//@@begin onActionSave(ServerEvent)
wdThis.wdGetSOCreaCustController().executeBapi_Salesorder_Createfromdat2();
wdThis.wdGetSOCreaCustController().executeBapi_Transaction_Commit();
//@@end
In the custom Controller I've got the code for those executions:
public void executeBapi_Salesorder_Createfromdat2( )
//@@begin executeBapi_Salesorder_Createfromdat2()
try {
wdContext.currentBapi_Salesorder_Createfromdat2Element().modelObject().execute();
catch (Exception ex) {
wdComponentAPI.getMessageManager().reportException(ex.getMessage(), false);
wdContext.nodeOutput().invalidate();
//@@end
public void executeBapi_Transaction_Commit( )
try {
wdContext.currentBapi_Transaction_CommitElement().modelObject().execute();
catch (Exception ex) {
wdComponentAPI.getMessageManager().reportException(ex.getMessage(), false);
wdContext.nodeOutput().invalidate();
//@@end
¿Is something wrong? ¿Is something missing? -
Problem while creating JCA connection to MDM server
Hi All,
I have restarted my mdm connector(com.sap.mdm.tech.connector) along with the applications related to Enrichment Controller. All applications restarted successfully. After that I tried accessing the URL
http://MDMSERVER:50000/MDM_EnrichmentController/WorkflowPolling?process=Monitor
but I am getting following exception in this page
Polling Repository
name=Vijaybabu_Repo_on_MDMSERVER, status=No repository connection, error description=com.sap.mdm.net.ConnectionException: Problem while creating JCA connection to MDM server MDMSERVER
Enrichment Request Threads
Could somebody help me pointing if something I have missed..
Thanks and Regards,
Manojhi Swarna,
I have verified the repository and found 0 fatal errors, 0 non-fatal erros and 0 warnings. I also checked the MDM Factory and Connector service is running fine.
The detailed exception is
Sep 2, 2008 12:49:40 PM com.sap.mdm.logging.MdmLogger error
SEVERE: Problem while creating JCA connection to MDM server 'KOLAPON'
com.sap.mdm.net.ConnectionException: Can not resolve JCA connection
at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnection(JcaConnectionUtil.java:119)
at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnectionAccessor(JcaConnectionUtil.java:62)
at com.sap.mdm.internal.session.JcaConnectionAccessor.reserveConnection(JcaConnectionAccessor.java:70)
at com.sap.mdm.internal.session.JcaConnectionAccessor.reserveConnection(JcaConnectionAccessor.java:59)
at com.sap.mdm.repository.commands.GetRepositoryStatusCommand.execute(GetRepositoryStatusCommand.java:67)
at com.sap.mdm.enrichment.common.ECAdminUtils.getRepositoryStatus(ECAdminUtils.java:125)
at com.sap.mdm.enrichment.common.EnrichmentUtils.validateRepostiryConfiguration(EnrichmentUtils.java:889)
at com.sap.mdm.enrichment.common.EnrichmentUtils.getCatalogManager(EnrichmentUtils.java:144)
at com.sap.mdm.enrichment.workflowpolling.PollingThread.getCatalogManager(PollingThread.java:166)
at com.sap.mdm.enrichment.workflowpolling.PollingThread.run(PollingThread.java:102)
Caused by: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: "ConnectionManager" is closed. Possible reasons: 1) connector "MDM Factory" is stopped or not started, 2) Connector service is stopped or has not been started.
at com.sap.mdm.connector.connection.MdmConnectionFactory.getConnectionEx(MdmConnectionFactory.java:223)
at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnection(JcaConnectionUtil.java:108)
... 9 more
Caused by: com.sap.engine.services.connector.exceptions.BaseResourceException: "ConnectionManager" is closed. Possible reasons: 1) connector "MDM Factory" is stopped or not started, 2) Connector service is stopped or has not been started.
at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:122)
at com.sap.mdm.connector.connection.MdmConnectionFactory.getConnectionEx(MdmConnectionFactory.java:213)
... 10 more
Regards,
Manoj
Edited by: Manoj Kumar Nanda on Sep 2, 2008 9:21 AM -
Problem while creating CAF project in NWDS workspace
Hi Experts,
We are facing a problem while creating CAF project in NWDS workspace. Even though we have tried in new workspace we are facing the issue. Find the below build error.
We are not getting any error when we build from CBS.
[javac] ERROR: C:\sap\test_VC_DC.jdi\0\DCs\test.com\ja\bl\journal\ejbmodule\_comp\src\com\test\ja\bl\journal\modeled\ModifyJournalLineItemRequestMessage.java:7: cannot find symbol
[javac] ERROR: symbol : class JournalLineItemDetail1
[javac] ERROR: location: package com.test.ja.cm.util.modeled
[javac] ERROR: import com.test.ja.cm.util.modeled.JournalLineItemDetail1;
when we expand com.test.ja.cm.util.modeled there is no file with name JournalLineItemDetail1 and the actual file exists is JournalLineItemDetail but we are not able to understand why 1 is appending to the file JournalLineItemDetail. Can somebody throw some light on this?
Regards,
PradeepHave you checked out the topics at the right in the More Like This section?
OT -
Problems while creating Web Services in development server
Hello,
We are facing problems while creating Web services . The transaction like WSADMIN, WSCONFIG are not there in development server. Its gives message u2018This transaction is obsoleteu2019.
Due to this while creating Webservice, there is and error message . Kindly guide me whats needs to be done.
We have also tried the transaction WSADMIN2 as suggested by SAP, but didnu2019t know wat needs to be done.
Regards,
Rachel
Edited by: Rachel on Feb 3, 2009 9:15 AMHi,
With your help, we were configuring WEB Service through soamanger.Due to some problem, we couldn't proceed further.Kindly guide us with the further steps.
*steps followed *
Step 1 : Entered Service Registry Parameters in WSPARAM .
Step 2 : In transaction SOAMANAGER->Technical Configuration -->System Global settings
Step3 : From u2018SE80u2019 transaction, selected the package ZHR and then right clicked to create the enterprise service -> Client Proxy (Service Producer)
We have followed steps in se80.Don't know how to proceed further.
We are unable to find the service in soamanger .How to find the service name in soamanager?
Regards,
Rachel
Edited by: Rachel on Feb 3, 2009 12:38 PM
Edited by: Rachel on Feb 3, 2009 12:48 PM
Maybe you are looking for
-
My iPod touch won't connect to wifi?
I recently got an iPod touch 5th gen, and at first everything worked fine. Randomly, it stopped connecting to my home wifi network. Other devices (my brothers phone, my tablet) connect to it fine, but with my iPod it says it's connected and I have 3
-
I want to download music purchases made on my iphone onto itunes on my pc and can't argghhh
iTunes has been running great, now I have bought a new laptop and want to use iTunes on it instead. In the meantime I have made a few purchases on my iPhone. I have iTunes up and running on the new laptop but seem unable to get the new purchases fr
-
Get a list of all objects in a document by type?
Is there a method somewhere that i can retrieve all objects, children, grandchildren, etc., by passing it's type? say i want to get all TextArea's in a document- i imagine something like getObjectsByType('TextArea') or something similar. Does this me
-
Camera & video not working right
On my iPad the back camera & video does not work all of a sudden. It freezes on the shudder screen & doesn't open. Also on the front camera when I take a picture it appears right but in my camera roll it is flipped. Any suggestions on what to do & ho
-
User names list in netinfo manager
I have never used netinfo manager but today I opened it out of curiosity and clicked on users and found a enormous list of user names. Can anybody tell me why they are there? Is this a security issue?