Problem while displaying data in spool using oops alv

Hi,
I have created a oops alv, in which iam displaying 2 ALV's on 2 containers..
Iam able to display the data which i need when i execute the program in foreground , But when i execute the program in background iam not able to see the 2nd ALV in the spool....
The ALV displays one below the other.
How i can i correct it..?
Vishwa

Hi,
The container created in ALV will work only in foreground as this is the framework the background cannnot initiate the container object and assign the ALV to the container.
Hence you cannot create the container object and assign the same to the ALV screen in background. Instead you need to use the factory method/ALV FM to display in background mode.
For background ALV processing, don't use OOPS! U can use this fm : REUSE_ALV_GRID_DISPLAY.
You can also refer below threads:
Re: ALV: Foreground Vs Background
Re: OO ALV in background job
Regards
Shiva

Similar Messages

Problem while writing data on xls file using jxl API

Hi,
I am getting problem while writing data on excel file using jxl api.
When i write data on file and all handles associated to the file are closed, file size increases but when i open the file nothing is written in it and when file is closed manually from excel window, file size decreased to its original that was before writing data.
here is code:
          FileOutputStream os = new FileOutputStream(this.dirPath + this.fileName, true);
          WritableWorkbook this.workbook = Workbook.createWorkbook(os);
after writing data following handler are closed:
this.os.flush();
                    this.workbook.write();
                    this.workbook.close();
                    this.os.close();
                    this.os = null;
can any body help me.
Thanks in advance

Err, I did help you. I did understand your problem; and I solved it for you. What was missing was that you apparently made no effort to understand what you were being told. Or even consider it. You just argued about it, as though you were the one with the solution, instead of the one whose code didn't work.
And the other thing that was missing was the part where you said 'thank you' to me for solving your problem. Somewhat more appropriate than biting the hand that fed you, frankly. I do this for nothing, on my own gas, and it's extremely irritating when people keep asking about problems I have already solved for them. I am entitled to discourage that. It's part of making them more efficient actually.
But it happens often enough that it also makes me think I'm just wasting my time. Probably I am.

Problem while retrving data from a view

Hi Friends
i have a problem while retriving data from a view v_t685a.
the error message is :""" "V_T685A" is not defined in the ABAP Dictionary as a table, projection view or database view."""
i wrote : select single VTEXT1 from V_T685A into w_cst_jin1 where
 KSCHL = 'JIN1' and
 KAPPL = 'V'.
how to retrive the data.
waiting for quick response
Regards
Mukesh

Hi
This is a Maintenance View, not a Database View
SO can't fetch data using select statement.
You can use the Table T685 directly to fetch the condition Types data straight away instead of the view. write the same select for this table and use.
Regards
Anji
Message was edited by:
 Anji Reddy Vangala

Problem while uploading data with GUI UPLOAD Function

Hi,
I am facing problem while uploading data with FM GUI UPLOAD in out text file there are 7 row but after the FM GUI UPLOAD there are 14 entries are coming in Internal table and each alternate row is coming as blank with 0000 in some column in internal table first row is proper and second line is blank so on.
what can be the problem .
The program in which we are using this we are using it from last 2 year but we are facing problem today only.
regards,
zafar

Hi,
The file formate is same as it is from last two years it is automatically generated by one another bar code server and there is no change in the file formate.
So waht can be the problem to check any inconsistancy in system i have develop a samll program fro uploading a text file with same function module , but it is working fine.
regards,
zafar

Problem while reading data from Serial Port

Hi All,
I am facing some problem while reading data from Serial Port.
As per the requirement I am writing the data on Serial Port and waiting for response of that data.
Notification for data availabilty is checked with method public void serialEvent(SerialPortEvent event) of javax.comm.SerialPortEventListener.
When we are writing data on the port one thread i.e. "main" thread is generated and when data availability event occures another thread "Win32SerialPort Notification thread" is generated. This creates problem for me as we can't control thread processing.
So can anybody pls explain me how to overcome this problem?
Regards,
Neha

My Problem is:-
I am simoultaneouly wrting data on port & reading data from port.
First I write data on port using outputStream.write() method. Now when target side sends me response back for the request on serial port DATA_AVAILABLE of SerialPortEventListner event occured,we are reading data from serial port.Now till the time we didn't get the response from target next command can't be written on the serial port. When we are writing data on port main thread is executed.Now my problem starts when DATA_AVAILABLE event occured.At this point another thread is created.Due to this my program writes data of next command without reading response of previous command.To solve this prob. I have used wait() & notify() methods as follows.But again due to this my pc hangs after execution of 2 commands. (PC hang in while loop in a code provided below.)
From SOPs I could figure it out that after 2 commands we are not able to write data on serial port so DATA_AVAILABLE event doesn't occure n pro. goes in wait state.
Can anybody help me to solve this issue.
Neha.
Code:
public void serialEvent(SerialPortEvent event)
          switch (event.getEventType())
               case SerialPortEvent.BI:
               case SerialPortEvent.OE:
               case SerialPortEvent.FE:
               case SerialPortEvent.PE:
               case SerialPortEvent.CD:
               case SerialPortEvent.CTS:
               case SerialPortEvent.DSR:
               case SerialPortEvent.RI:
               case SerialPortEvent.OUTPUT_BUFFER_EMPTY:
                             break;
               case SerialPortEvent.DATA_AVAILABLE:
                    try
                         dataThread = Thread.currentThread();
                         dataThread.setPriority(10);
                         dataAvailable = true;
                                                                                byte[] tempArray=new byte[availableBytes];
                                    inputStream.read(tempArray);
                                                                   catch (IOException io)
                         SOP(io, "Error in serialEvent callback call for event DATA_AVAILABLE");
public void writetoPort(byte[] data) throws IOException
                         outputStream.write(data);
                          while(finalTimeOut >= actualTime)
                        if( ! dataAvailable)
                                actualTime = System.currentTimeMillis();
                       else
          synchronized (mainThread)
               mainThread = Thread.currentThread();
               mainThread.wait();
public void sendDatatoUser(byte[] b) throws Exception, HWCCSystemFailure
          obj.returnData(b);
          synchronized(mainThread)
               mainThread.notify();

Display data in smartforms using report

hi,
i want to display data from smartform using report.
i have a preview buttons in report when i select preview buttons displays in smarts
regards
amit

design the smartform as per ur need and get the function module generated by smartform and pass it to ur report programas below..
case sy-ucomm.
when 'smartform'.
pass the f.m that is generated by system in smartforms
 CALL FUNCTION '/1BCDWB/SF00000265'
 EXPORTING
 ARCHIVE_INDEX =
 ARCHIVE_INDEX_TAB =
 ARCHIVE_PARAMETERS =
 CONTROL_PARAMETERS =
 MAIL_APPL_OBJ =
 MAIL_RECIPIENT =
 MAIL_SENDER =
 OUTPUT_OPTIONS =
 USER_SETTINGS = 'X'
 DATE_L = s_fkdat-low
 DATE_H = s_fkdat-high
 PLANT_L = s_werks-low
 PLANT_H = s_werks-high
IMPORTING
 DOCUMENT_OUTPUT_INFO =
 JOB_OUTPUT_INFO =
 JOB_OUTPUT_OPTIONS =
 TABLES
 IFINAL = ifinal1[]
EXCEPTIONS
 FORMATTING_ERROR = 1
 INTERNAL_ERROR = 2
 SEND_ERROR = 3
 USER_CANCELED = 4
 OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endcase.

Error while loading data to Infocube using DTP.

Dear All
I am facing problem while uploading data in Zinfocube. Up to PSA the data is loaded and not showing any error but when we try to upload the data from PSA to INFOCUBE through a DTP, It ens up showing error message (Error while updating to targets Infocube) . The long text and details doesnot give any further information. I can't figure out what could be the reason....
Thanks
Dinesh Sharma

Hi
The data might be mismatched between PSA and Cube or might be the problem in the transformation. We cannot really say what the problem until you tell the error msg.
There will be some error message in DTP monitor
Regards
Srikanth

Problem with displaying Date field in the table.

Hi All,
I am trying to display data into a table UI Element.
In that data, i have one DATE type field. While displaying data in DATE field, it will display like this "01.02.2009".
Now my requirement is if i want to modify that DATE field, it will allow to modify "01.02.2009" to "26.02.2009".
But while modifying DATE field , I want to show the Calender of that month, in that i have to select the another date.
(Like normal Date UI Element will show that calender).
Can anyone please help me.
Thanks in Advance!
Regards,
Sreelakshmi.

Hi,
Go to the context attribute that was mapped to the DATE field of the table and change the perperty INPUT HELP MODE to AUTOMATIC and it works.
Regards,
Manne.

Problem while loading data from ODS to infoobject

Hi guys,
I am facing problem while loading data from ODS to infoobject.
If I load data via PSA it works fine but
if I load data without PSA its giving error as Duplicate records.
Do u have any idea why it is so.
Thanks in advance
savio

Hi,
when you load the data via the PSA, what did you select? Serial or Paralel?
If you select serial most likely you don't have duplicates within the same datapackage and your load can go through.
Loading directly in the IObj will happen thefore if you have the same key in two different packages, the "duplicate records" will be raised; you can perhaps flag your IPack with the option "ignore duplicate records" as suggested...
hope this helps...
Olivier.

Problem in displaying dates for replacement path with text variable

Hi all,
I have to display dates in sequence as descriptions for 15 columns based on the the date entered by the user in Bex Report.I managed to display date as description using text variable with replacement path for single column.I could not able to increment date for other descriptions.Could you please help me to solve this issue.Its urgent.
Ex: User enters 03/09/2007 then in the out put desciptions for the columns should be 03/09 04/09 05/09 ............ 17/09.
Thanks in advance.
Regards,
Mandadi.

Hi,
goto the properties of your KF and click on the variable button side to that of the description field and click on new/Create option.Enter the technical name description for the text variable and select Replacement path as the Processing type and in the nxt screen select Fiscal year as the replacement variable and in nxt screen specify as Key and provide offset values if necessary and click on finish.now select the variable by clickin on the variable button next to the description field.it comes after the description of the KF.Now run the query.
Thanks,
Sandeep

How to rollback a traansacation if we got any problem while sending data to

how to rollback a traansacation if we got any problem while sending data to a webservice...

Is it SOA or OSB? Which version you are in..

Problem while importing data schema not found

Hi,
I'm facing problem while importing data through system to a schema and impdp gives me error that schema XYZ was not found but when I query dba_users schema exist there what could be the reason of this.
Regards,
Abbasi

Hi,
Here is complete listing
bash-3.2$ impdp system/abc schemas=XYZ DIRECTORY=data_dir DUMPFILE=Today_dump.dmp LOGFILE=Today_log.log PARALLEL=8
Import: Release 11.1.0.7.0 - 64bit Production on Friday, 07 January, 2011 11:18:57
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39002: invalid operation
ORA-39165: Schema XYZ was not found.
Regards,
Abbasi

Facing problem while loading data into XI

Hi All,
I am facing a peculiar problem while loading data into XI when we load small amount of data say 5-10 records these records gets processed, but when we try to load a bit higher volume say 100-500 which comes out to be around 7 record s per second then the record processing gets stalled. That is it gives a message that "recorded for outbound processing".
So can any body throw some light on it and can tell us why we rare facing such problem and how can we resolve that problem.
Thanks in Advance.
Regards
rahul

Hi rahul,
Deregistering and Registering the Queue is a temporary solution.
The better way to this would be to Tune your Xi system as already mentioned by Vijaya as mentioned in the guide ,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7fdca26e-0601-0010-369d-b3fc87d3a2d9
Regards,
Bhavesh

Problem in displaying data using ALV interactive using OOPS

Hi friends,
I have created one interactive report using oops..
on my selection screen i have a select-option TABNAME for DD02L table with no intervals option.
ie : i enter table names in that field..
for example i enter VBAP
                               MARA,
                               MARC.       etc
when i execute i get a basic list which gives some details about the tables.
now on my basic list when i double click on any row then ie : say if i click on 2nd row , in the back ground based on the index on which i have click iam reading that particular row from the table and from that using the table name iam displaying the all the fields of the table in the ist secondary list....
Till now its working fine but once when i go back to the back to the basic list and when i click another row... here even if click another row its displaying the same fields of the table which was ist click.
ie : say ist time i have clicked mara then later vbap.....But its displaying me the mara details instead it should display vbap details...
I have used refresh_table_display method also.... But its not working fine...
How can i correct it...
Regards,
Kumar.

Hello Kumar
I can only guess that you call the second screen (perhaps '0200') within the event handler method for event DOUBLE_CLICK. This is not really a good idea. Instead use a simple trick to overcome this refreshing problem:
METHOD handle_double_click.
" Save the row perhaps in a static attribute of your event handler method, e.g.
. lcl_eventhandler=>ms_row = e_row. " ms_row defined as static attribute of event handler class
" Trigger PAI with a defined ok-code:
CALL METHOD cl_gui_cfw=>set_new_ok_code
    EXPORTING
     ok_code = 'DETAIL_LIST'.
ENDMETHOD.
This method call triggers PAI of your screen which otherwise does not occur after an event has been raised.
MODULE user_command_0100 PAI.
CASE gd_okcode.
    WHEN 'DETAIL_LIST'.
       perform DISPLAY_DETAIL_LIST. " and call screen '0200'
    WHEN OTHERS.
ENDCASE.
ENDMODULE.
The next time you make a double click a new row/index is filled into the static attribute. By triggering PAI (followed by PBO) you ensure a flushing (= refreshing) before the secondary list is displayed.
Regards
Uwe

Problem in Rough Cut Plan while displaying Date & the nbre of columns

Hi Expert,
During the creation of Rough Cut plan for material Trx MC87, the system display only one Column and the displayed date is 2012.
I Tried to extend the period by using the the button "page Right" and "page left" but there is no chance.
your support is highly suitable
Tsang

Hi dear,
I tried that but not working for me could you please investigate again in my request

Problem while displaying data in spool using oops alv

Similar Messages

Maybe you are looking for