Problem while updating multiple records through standard RFC

HI all,
I am doing multiple object updation using a standard RFC(BAPI_PROJECT_MAINTAIN). The RFC i am calling from Enterprise portal. I am sending data to RFC one by one. But the error i am getting is object is locked by user so data can't be save.
Though i am using Lock and unlock method before and after calling RFC the project lock error comes up.
What might be the reason
regards
sandeep

use saveandwait instead save in bapi

Similar Messages

Error while updating the records through a DB link

Hi ,
I am getting the below error while updating around 15 thousands records, i suspect it to be timeout but not sure.Please can you let me know what solutions needs to be taken.
Not Found
The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
Not Found
The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server Server at htmldb.oraclecorp.com Port 80
Object Type TABLE Object GWB_GRN_GRP_COUNTRIES_LU
Table Column Data Type Length Precision Scale Primary Key Nullable Default Comment
GWB_GRN_GRP_COUNTRIES_LU NAME Varchar2 720 - - - - - -
ALIAS Varchar2 720 - - - - - -
ACTIVE Varchar2 3 - - - - - -
REGION Varchar2 300 - - - - -
1 - 4
Thanks & Regards,
Ramu

Hi Sangu,
See if the following notes help you:
Error when calling API from SQL*Developer, eg. ORA-01403 in API OE_ORDER_PUB.PROCESS_ORDER (Doc ID 1054295.1)
Cancellation Of Transfer Orders Is Not Possible - ORA-01403: no data found in Package OE_Order_PVT Procedure Process_Order (Doc ID 391307.1)
Thanks &
Best Regards,

Problem while updating the records. IN clause no. of items

We have an issue in updating a table when the inside IN more than 1000 numbers are passed ,
it throws error message - ORA-01795 : maximum nunbers of experssions in a list is 1000. Is there any workarround (wihtout using ARRAYs).
experssions list is passed from java.
update <table> c
set c.data='test'
where c.id in (123,345,.... 25,0000 records);We tried this way , it throws error.
DECLARE
txt varchar2(32000):= <Text size 30000>
BEGIN
update <table> c
set c.data='test'
where c.id in (select To_number(REGEXP_SUBSTR (txt, '[^,]+', 1, level)) from dual
connect by level <= regexp_count(txt,',')+1
);thanks in advance..

Hi,
you can use WITH refactoring clause and UNION like shown below:
with gen1 as (select level x from dual connect by level <= 1000),
gen2 as (select level+1000 x from dual connect by level <= 1000),
gen3 as
(select * from gen1
union
select * from gen2)
select * from dual where 1 not in (select x from gen3);Best regards,
Nikolay

Problem while reading multiple files through FTP Adapter

Hi,
We have a requirement to read the excel files placed in an FTP Location and as there is no Adapter to read Excel file
we are using FTP Adapter and reading the Header values of the file(name of the
file) and we are paasing as input to the Java code which will read the data nd insert into the Database.
If we place above 20 files it was reading only some files and some were left and if we delete the files and place the unread files again some files are read and if we do the same procedure then all the files were read.
Any help regaring this appreciated.
Thanks and Regards,
Nagaraju .D

Are you doing anything complex for your polling, e.g. Files that must be n time old.
Can you post the WSDL so I can see the polling configuration. I only need to see the adapter configuration, not the whole file.
cheers
James

Facing problem while updating IInfotype 0009-bank details through workflow

Dear SAP Gurus,
I am facing a problem while updating Infotype 0009 through workflow which is integrdated with portal.
Scenario:
Employee logins to portal and changes his/her bank details like payee name, bank key, account number, postal code and city of bank, bank name etc.
Once he submits the request, my workflow is triggered through SAP_WAPI_START_WORKFLOW which is called from portal and goes through various approval steps and finally reaches the step where the container elements are finally to be updated in IT0009.
Field bank account number (BANKN), which is part of table PA0009 are easily updates using the FM HR_INFOTYPE_OPERATION by first enqueuing the employee number and after the update dequeuing it.
However fields like payee name (EMFTX) bank key (BANKL) , bank name(BANKA -structure BNKA_BF-this is automatically fetched based on bank key) and postal code(BKPLZ) and city of bank (BKORT) are from structure Q0009 (on the infotype 9 screen level) and from table BNKA (at table level). The problem is that these are not getting updated by HR_INFOTYPE_OPERATION as they are not the part of infotype 9.
Can anyone help me to understand how can these fields be updated ?
Quick help will be highly appreciated.

Hi Spantaleoni,
Thanks for your quick response.
Well actually the table BNKA is a master table for the bank information and we must not create entries in it or update the table programatically, rather we should use the available data in it.
Now say employee currently has bank as A and he wants to change it as B which is available in BNKA then he will just select the bank B from search help provided in portal which again comes from table BNKA only. Employee then submits the info and it must get updated in the infotype PA0009.
As far as think, this should be done on screen level of infotype PA0009 as I have already mentioned that certain fields are coming from structure Q0009 and they cannot be updated on PA0009 table level.
I am just looking for way through which I can update the screen of infotype PA0009 of employee through workflow.
Regards

Error while updating bank details through ESS

Hi All,
While updating banks details through ESS, " change in the payroll past not possible".
I have checked IT0003 and noticed that accounted to 31.08.2014.
I assume this might be causing the error. Could you please advice with your expertise.

Let me explain how it happens and why we don't allow change of bank records in past 1959820 - ESS: Wrong delimit of TC3 records For other scenarios where ESS behavior is similar to PA30 :
An example i share
For other scenarios where ESS behavior is similar to PA30 :
Current date < End date of current payroll period
Current date > Accounted to date in IT0003
Payroll status: released for payroll Got error when reviewing the editin
-g.
Error: Online maintenance is locked in payroll area QM
Current date < End date of current payroll period
Current date < Accounted to date in IT0003
Payroll status: released for correction Got error when reviewing the edi
-ting.
Error: Change in the payroll past not possible
Current date < End date of current payroll period
Current date < Accounted to date in IT0003
Payroll status: released for payroll Got error when reviewing the editin
-g.
Error: Online maintenance is locked in payroll area QM
When the infotype 0009 is modified, the system is regrouping data for the infotypes which are checked releavnt according to the table T582G. Retroactivity is checked via V_T582A In view V_T582A for infotype 0009 you will see, I guess, that the field 'Past entry all.' is maintained with an 'E'. This means that it is not allowed to maintain any infotype 0009 record for the payroll past. The important day for this check is the last day of the last accounted period. Retroactive change of infotype 0009 is not permitted as the bank transfer is already done. This is the reason why this infotype can not be changed retroactively. For bank records end user must not be allowed to maintain past date records and should not be allowed to change any other detail of record when payroll for that period is already run. for e.g. if current date is 26/11/2013. Then end user must not be allowed to edit other bank record effective from 25/11/2013. We should not allow end user to edit record effective from 27/11/2013 because payroll is already run for that period. If user is allowed to change then data maintained in infotype 9 and information send to payroll may be different. You can use BAdi HRXSS_PER_BEGDA,to default the next payroll period

I want to update multiple record in database which is based on condition

hi all,
I am using Jdev 11.1.2.1.0
I have one table named(Pay_apply_det) in this table i want to update one column named(Hierarchy) every time and according to change i want to update or i want to maintain my log table named(pay_apply_appr).It based on level wise approval when the lowest person approve the record show on next level but if the second
level person back it will be show only previous level hierarchy.And when the final approval happen the Posting_tag column of pay_apply_det will be updated too with hierarchy column.
i have drag pay_apply_det's data control as a table in my .jsf page and add one column approve status in UI .in the approve status i used radio group which return A for approve B for back R for reject through value binding i make it get or set method in it baking bean.
in backing bean class i have written code
    public void approveMethod(ActionEvent actionEvent) {
        ViewObject v9=new UtilClass().getView("PayApplyDetView1Iterator");
        int h5=0;
        Row rw9= v9.getCurrentRow();
        String x=(String) rw9.getAttribute("RemarkNew1");
        System.out.println(x);
        String z=getR2();
        System.out.println(z);
        if(( z.equals("R") || z.equals("B") )&& x==null)
            FacesMessage fm1 = new FacesMessage("Plz Insert Remark Feild");
            fm1.setSeverity(FacesMessage.SEVERITY_INFO);
            FacesContext context1 = FacesContext.getCurrentInstance();
            context1.addMessage(null, fm1);
        else{
        ADFContext.getCurrent().getSessionScope().put("Radio",getR2().toString());
        String LogValue=(String)ADFContext.getCurrent().getSessionScope().get("logid");
        ViewObject voH=new UtilClass().getView("PayEmpTaskDeptView1Iterator");
        voH.setWhereClause("task_cd='449' and subtask_cd='01' and empcd='"+LogValue+"'");
        voH.executeQuery();
        Row row1= voH.first();
        int h1=(Integer)row1.getAttribute("Hierarchy");
          System.out.println("Login Person Hierarchy on save button press.."+h1);
        ViewObject vo9=new UtilClass().getView("PayApplyDetView1Iterator");
        Row row9= vo9.getCurrentRow();
        if(getR2().equals("A")&& h1!=1)
         row9.setAttribute ("ApprHier",h1);
            row9.setAttribute("IsClaimed","N");
            row9.setAttribute("ClaimedBy",null);
            row9.setAttribute("ClaimedOn", null);
        else if(getR2().equals("B") ) {
            ViewObject voO=new UtilClass().getView("LoHierViewObj1Iterator");
            voO.setNamedWhereClauseParam("QHVO", LogValue);
            Row rowO = voO.first();
           h5=(Integer)rowO.getAttribute("LPrehier");
            System.out.println("Back lower hier..."+h5);
            row9.setAttribute ("ApprHier",h5);
            row9.setAttribute("IsClaimed","N");
            row9.setAttribute("ClaimedBy",null);
            row9.setAttribute("ClaimedOn", null);
          else if((h1==1) &&(getR2().equals("A")) )
                  row9.setAttribute ("PostingTag","Y");
                  row9. setAttribute ("ApprHier", h1);
                    row9.setAttribute("IsClaimed","N");
                    row9.setAttribute("ClaimedBy",null);
                    row9.setAttribute("ClaimedOn", null);
          else if(getR2().equals("R"))
            row9.setAttribute ("ApprHier",-1);
            row9.setAttribute("IsClaimed","N");
            row9.setAttribute("ClaimedBy",null);
            row9.setAttribute("ClaimedOn", null);
        BindingContext BC=BindingContext.getCurrent();
        BindingContainer ac=BC.getCurrentBindingsEntry();
        OperationBinding ob=ac.getOperationBinding("Commit");
        ob.execute();
       vo9.executeQuery();
        FacesMessage fm = new FacesMessage("Your Data Successfully Commited..");
        fm.setSeverity(FacesMessage.SEVERITY_INFO);
        FacesContext context = FacesContext.getCurrentInstance();
        context.addMessage(null, fm);
    }here i put my approve status radio value in session variable because i also want to update my pay_apply_appr table which code i written in pay_apply_det IMPL class.
Every thing is running well when i update single record but when i want to update multiple record then my current row only updated in pay_apply_det but log table( pay_apply_appr) created for all record.
so is there any solution plz help me.
thanks
RAFAT

Hi Rafat,
If you are able to insert into, all you need to do is iterate through the rows. For this , before the first IF condition
if(getR2().equals("A")&& h1!=1)Get the row count using int numRows =vo9.getRowCount(); , and then write it before the IF condition
if (int i=0;i<numRows;i++} After
row9.setAttribute("ClaimedOn", null);
        }write vo9.next(); to iterate to next row,
Hope this will work.
Nigel.

Update Multiple records using NW CE WebDyn Pro 7.2 interface ITEMDETAILS

We are trying to use SAP Netweaver CE 7.2 and NetWeaver Design Studio 7.2 with the Web Dynpro application interfaces configured to connect to our MDM 7.1 SP06 repositories to develop web screens that allow our end users the ability to maintain MDM repository data without the use of DataManager.
Our first application was to be a simple one to show the business the benefit of SAP Netweaver. Itu2019s very easy to use the interfaces for SEARCH, RESULTSET, ITEMDETAILS, MATCH and MERGE if you plan to maintain one record at a time. We would like to update many records at the same time.
Using the configuration described previously, I find that I am able to select multiple records at one time using the RESULTSET interface and the Context folder of u201CSelectedRecordsu201D but I am not able to pass multiple records at one time to the context u201CIODatau201D used by the ITEMDETAILS interface and allow my end users to see and update multiple records at one time.
If I can pass multiple records from RESULTSET to ITEMDETAILS for display and update would you please provide me with an example of how I would do this in NetWeaver Design Studio for NW CE 7.2..
If I can NOT pass multiple records from RESULTSET to ITEMDETAILS for display and update, Would I then have to write my own wrapper application to read multiple records selected using the RESULTSET interface and the develop my own UPDATE view to display and update more than one record at a time. This would be time consuming since I would also have to write my own back out procedures and validation of update procedures that already happen within ITEMDETAILS. Do you happen to have any CE application examples that show how this is done for a NW CE MDM repository that I can see? The current documentation u201CHow to Build Web Applications Using MDM Web Dynpro Components. pdfu201D falls short in the area of updating multiple records.
Thank you in Advance

Bugs aside, if it's VERY noisy, that might just be the out-of-sync problem (something I'm very familiar with now).
Search the forum for "aggregate sync" and you should get some clues, if this is indeed the problem.
Short of it is, you need to sync the two devices together. Easiest way seems to be to connect the two devices via S/PDIF and set Clock Source to S/PDIF for the "slave" device (set in Audio Midi).
You can also just set the Clock Source as the "master" device in the drop down, bypassing the need for the S/PDIF cable altogether, but I haven't tried this myself.
Macbook Pro CD / iMac C2D Mac OS X (10.4.8)

Programmatic updating multiple records of a table in ADF

Hi,
I am using Jdeveloper : 10g 10.1.3.3
Problem : I need to update multiple records in DB using ADF feature.
The senario is like user is shown records of item consisting of item name, item code, category code, price etc. then user clicks "change category code" link availabe against each record. In next page user is shown current code and provided a text box to enter new code. Once i get this in my bean i need to update all records as:
update item_info set category_code = :new_code where category_code = :current_code. Means to udate category code in all the records where category_code is :current_code.
I have Entity and View Object for this table.
How do i update multiple records using created view which is entity based?
Have A Nice Time!
Regards,
Kevin

In ADF you don't use update statement directly. This is done by the framework.
You have to search for the records which match your condition category_code = :current_code using your VO based on the entity.
Then iterate over the result set and change each row to your need setCategoryCode(newCode);
When you commit the changes they are persist them in the DB.
To see the changes in the UI you have to update the display using PPR or execute the query again.
Timo

Update multiple records on one page php/mysql

Hi folks,
I am trying to adapt a page to offer the option to update multiple records on one page.
The intention is to edit FAQ categories which are contained in a table with just two fields - the category and an id.
The page lists each categories in a form with a submit button which is then repeated for each record in the recordset.
Unfortunately my plan didn't work and only the first record updates as intended.
Can anyone suggest how I can make it work?
Here's the code I have so far.
************** The Update Code *****************
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if (!isset($mm_abort_edit) || !$mm_abort_edit) {
if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "form1")) {
$updateSQL = sprintf("UPDATE faq_categories SET category=%s WHERE id=%s",
                       GetSQLValueString($_POST['category'], "text"),
                       GetSQLValueString($_POST['id'], "int"));
mysql_select_db($database_con_mysite, $con_mysite);
$Result1 = mysql_query($updateSQL, $con_mysite) or die(mysql_error());
$updateGoTo = "faq-category-edit.php
if (isset($_SERVER['QUERY_STRING'])) {
    $updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
    $updateGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $updateGoTo));
************** Update Code Ends *****************
************** The Form *****************
<form name="frm_editcategory" id="frm_editcategory" method="POST" action="<?php echo $editFormAction; ?>">
<?php do { ?>
<fieldset>
          <input name="id" type="hidden" value="<?php echo $row_rs_faqcategory['id']; ?>" />
          <input name="category" type="text" class="formrightcolumn" value="<?php echo $row_rs_faqcategory['category']; ?>" />
          <input name="save" type="submit" class="submitbutton" id="save" value="save" />
</fieldset>
          <input type="hidden" name="MM_update" value="form1" />
   <?php } while ($row_rs_faqcategory = mysql_fetch_assoc($rs_faqcategory)); ?>
</form>
************** The Form Ends *****************
Cheers
Dave

What does debugging tell you? What's the value of each of the variables? Did you try using regular echo statements to monitor what's going on? That's what I always do whenever I am stuck in my PHP coding.

Problem while Binding multiple Parameters to View Object[Solved]

Hello,
I am facing problem while binding multiple parameters with different data types in View Object query. For example suppose I have following query in my view object.
SELECT Header.ADDED_BY
Header.BATCH_ID,
FROM BATCH_HEADER Header
WHERE :1='deptAdmin' and Header.BATCH_ID
in
select batch_id from batch_header_dept_mapping where dept_id in(SELECT * FROM TABLE(CAST(:0 AS TABLE_OF_VARCHAR)))
I am able to pass the Bind variables of Array type for : 0 , using Steve's ArrayOfStringDomain example. (ArrayOfStringDomain) .
But after passing value to second bind parameter ie.. :1 .
I am getting the error as follows.
## Detail 0 ##
java.sql.SQLSyntaxErrorException: ORA-00932: inconsistent datatypes: expected - got CHAR.
I tried to set
setWhereClauseParam(1,11); // 11 is Number
setWhereClauseParam(0,arr); // arr is arr = new Array(descriptor,conn,deptid); for in parameter.
But of no use , Please let me know if any thing missing form me or have any another solutions. Also please provide me any example if have.
Thank you,
Sandeep
Edited by: user11187811 on Oct 23, 2009 7:27 AM
Edited by: user11187811 on Oct 26, 2009 12:52 AM
Edited by: user11187811 on Oct 26, 2009 6:51 AM

hi.
but when using non-Oracle named parameter binding styles as you've done (ie. , :1), regardless of what number you give each bind variable, they are sequenced 0, 1, 2 etc. As such your bind variable :1 is the 0th parameter, and your bind variable is the 1st parameter.Your statment is correct.
:1 i used was actually on 0th position and :0 was on 1 position. Like you said in sequence 0,1,2 etc. Now i get the answer and i corrected My mistake by assigning right values to right binding variable. and problem just solve.
Thanks Chris.

Problem while inserting a record to infotype 416

Iam facing a problem while inserting a record to the infotype 416 for a personnel no using the FM 'HR_INFOTYPE_OPERATION'.I have created a FM to insert a record to the infotype 416.In that FM iam using the FM 'HR_INFOTYPE_OPERATION' to create a record for infotype 416.while executing my FM the FM 'HR_INFOTYPE_OPERATION' is returning the return value 0.But when i check in PA30 for the infotype 416,there is no record created for that personnel no.Also in the table PA0416 the record is not get created.SO what might be the problem.can anyone please provide me help on this.
I have attached the code of my FM for ur reference.
FUNCTION Y_ESS_FL_ENCASH.
DATA: G_COMPENSATION_AMOUNT LIKE PA0416-AMONT,
      G_RETURN TYPE BAPIRETURN1.
DATA T_PA0416 LIKE P0416 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'HR_READ_INFOTYPE'
    EXPORTING
       TCLAS                 = 'A'
       PERNR                 = '00000014'
       INFTY                 = '0416'
     BEGDA                 = sy-datum
     ENDDA                 = sy-datum
       BYPASS_BUFFER         = 'X'
     LEGACY_MODE           = ' '
IMPORTING
     SUBRC                 =
      TABLES
        INFTY_TAB             = T_PA0416
EXCEPTIONS
INFTY_NOT_FOUND       = 1
OTHERS                = 2
    LOOP AT T_PA0416
    WHERE SUBTY = '1002'.
    ENDLOOP.
    IF SY-SUBRC <> 0.
      CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
        EXPORTING
           NUMBER = '00000014'
        IMPORTING
           RETURN = G_RETURN.
      IF SY-SUBRC <> 0.
         MESSAGE I016(RP) WITH ' RECORD IS ALREADY LOCKED'.
      ENDIF.
      T_PA0416-PERNR = '00000014'.
      T_PA0416-SUBTY = '1002'.
      T_PA0416-INFTY = '0416'.
      T_PA0416-OBJPS = ''.
      T_PA0416-SPRPS = ''.
      T_PA0416-SEQNR = ''.
      T_PA0416-AEDTM = SY-DATUM.
      T_PA0416-UNAME = SY-UNAME.
      T_PA0416-ENDDA = SY-DATUM.
      T_PA0416-BEGDA = SY-DATUM.
      T_PA0416-NUMBR = '10'.
      T_PA0416-WGTYP = '1530'.
      T_PA0416-AMONT = '15000'.
      T_PA0416-WAERS = 'INR'.
      T_PA0416-QUONR = '1'.
      APPEND T_PA0416.
      CALL FUNCTION 'HR_INFOTYPE_OPERATION'
        EXPORTING
          INFTY                  = '0416'
          NUMBER                 = '00000014'
          SUBTYPE                = '1002'
OBJECTID               =
LOCKINDICATOR          =
         VALIDITYEND            = '31129999'
         VALIDITYBEGIN          = SY-DATUM
        RECORDNUMBER           = ''
          RECORD                 = T_PA0416
          OPERATION              = 'INS'
          TCLAS                  = 'A'
DIALOG_MODE            = '0'
        NOCOMMIT               = 'X'
VIEW_IDENTIFIER        =
SECONDARY_RECORD       =
        IMPORTING
          RETURN                 = G_RETURN.
KEY                    =
      IF G_RETURN+0(1) EQ 'E'.
              MESSAGE I086(ZHR) WITH 'Record is not inserted in IT416'.
      ELSE.
          COMMIT WORK.
      ENDIF.
      CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
        EXPORTING
          NUMBER = '00000014'
        IMPORTING
          RETURN = G_RETURN.
    ENDIF.
ENDFUNCTION.

Hi Murthy
With a first glance, I think you have given a wrong parameter value to "validityend". It should be '99991231' not '31129999' .
If your problem still persists, try inserting the data online from PA30. If your input causes no errors, then please state what the return parameter contains.
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

Problem while updating the Support Package 17 on my SAP WAS SP9

Hi,
I'm facing problem while updating the Support Package 17 on my SAP WAS SP9
ERROR 2006-10-13 10:23:22
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).
Please help me in this regard.....
Thanks in advance...
Satya

Hello gentlemen, I am also having problem with the following running on 64 bit Windows and SQL2005/64 bit. I am erroring in Step 8 'Updating JDBC' driver. I am attempting to update from SP9 to SP18. The WEBAS Jave installed went flawless but I seem to be stuck here. Any help is appreciated...
ERROR 2006-11-22 10:13:57
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).

How to update multiple records in Oracle ?

Hi Guys,
<b>I have to update multiple records from a file into Oracle Table...</b>
I can successfully insert the multiple records into the table but can't update the multiple records into the table.
when i am using UPDATE_INSERT only my first record of the file is getting updated in th e table..
Please share your views with me.
Regards,

I solved it by making changes in the occurrence parameter of data type ...:-)

There was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable

there was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable

YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

Problem while updating multiple records through standard RFC

Similar Messages

Maybe you are looking for