Problem with a Currency field in Adhoc Query - HR

Hi,
I have an Adhoc query that uses Custom infotype fields (Z infotype and z fields).
The currncy field also has a reference field in the infotype (of type waers).
Wehen we try to get the ouput of the Adhoc Query it gives following error:
The report cannot be generated because the internal description is invalid or incomplete, or because the selection screen is too large.
Regenerate the assigned InfoSet, and read the log. If the InfoSet is OK, make sure that at least one field is given as output.
If you used the 'Refresh' icon to start the query, use the 'Output' menu option to execute the query. This gives you a full screen display of the data.
If an output was generated, the query cannot work with actual data in the construction view. In this case, always use the 'Output' function to execute the query.
I have already tried a number of solutions:
1> Regenerate the infoset...
2> make the field as an additional field and write my own code for it (the error comes before the code as i kept a breakpoint but it stopped before that)
if i add other fields of this infoset instead of this field, then those appear in the output.
Any solutions ??
thanks in advance,
Anuj

Hi,
Is the problem not clear or no one has an answer?
Please reply with some suggestions..
Regards,
Anuj.

Similar Messages

Problem with non currency field calculations to become curr

Hi guys,
Is there a problem if I have a QUAN field and DEC field forming to become a CURR field? I mean a have this computation below:
v_var1 = v_var2 * v_var3.
where v_var1 type QUAN, v_var2 type DEC and v_var3 type CURR...
would it incur any problem with the calculations?
Thanks!

Hi,
Did you try ?
Worked for me flawlessly
tables bseg.
parameters : qty like bseg-menge,
amt like bseg-dmbtr.
data : result like bseg-dmbtr.
result = qty * amt.
write result.
The only issue is that the result will be rounded upto 2 decimals.
But if you declare result as
data : result(13) type p decimals 3.
Then there will be no issues.
regards,
Advait
Edited by: Advait Gode on Oct 3, 2008 3:59 PM

Problem with Local Currency field in PIPE monitor

Hello, We have configured PIPE in BW and sent idoc WPUBON (sales) there.
But the task u2013 u201CSupply to BW immediatelyu201D are failed :
The error message is :
"Field Local Currency does not have a value (initial).
System Response
Current processing requires the field to be enriched within the master data checks.
Procedure for System Administration
Check Customizing for the master data checks."
My question is if the problem are reffered to PIPE configuration problems or BW master data downloading ?
I didnu2019t find this field anywhere in /POSDW/img. Maybe this is BW master data problem?
But I am confused the phrase u201CCustomizing for the master data checksu201D . Is it still the PIPE cutomizing problem?
Where is the "Customizing for the master data checks"? What does it mean?
Thank You.

Hi
Can any one please tell me do you have any solution for this. I am getting problem in quality box.
Regards
Mark

Problem with the currency fields in the table cdpos

Hi Gurus,
       I have observed one thing with the cdpos table like whenever we made changes to the currecy( and numeric fields also ,i am not sure ) fields ,then in the cdpos table it is showing a new entry for that change but not showing that old value, why? .But when we made any changes to date fields ,then it is storing that old date.
So Is there any specific feature in this table.
Thanks & Regards,
Rakesh.

Hello
In ABAP-programm try this:
DATA:       NEW LIKE CDPOS-VALUE_NEW,
      OLD LIKE CDPOS-VALUE_OLD,
      NEW1 TYPE MENGE_D,
      OLD1 TYPE MENGE_D.
FIELD-SYMBOLS: <f> TYPE ANY.
* make select from CDHDR and CDPOS
IF CDPOS-FNAME = 'MENGE'.
MOVE CDPOS-VALUE_NEW TO NEW.
MOVE CDPOS-VALUE_OLD TO OLD.
ASSIGN NEW TO <f>.
CATCH SYSTEM-EXCEPTIONS CONVT_NO_NUMBER = 2
       OTHERS = 4.
       NEW1 = <f>.
ENDCATCH.
ASSIGN OLD TO <f>.
CATCH SYSTEM-EXCEPTIONS CONVT_NO_NUMBER = 2
       OTHERS = 4.
       OLD1 = <f>.
ENDCATCH.
ENDIF.
After this in NEW1 and OLD1 you will see values.

Problem with a Dynpro field (type numc)

hi everybody.
I'm developping a ModulPool application in wich i have 2 RadioButtons with 2 textbox fields.
What i pretend to do is, when the user clicks a radiobutton and strikes Intro, enable the corresponding textbox field and disable the other one.
My code runs fine, but i have a little problem. When I loop the screen table, to set the appropiate value to the 'input' property, in this case, when i try to disable it (input = '0'), I get a zero character in that field. This field has NUMC type, i'm sure this is the problem
'cos i've got no problem with the other field (type char). But i can't solve it.
Anybody's got an idea?
Thanks

What you are seeing is the normal behavior of a numeric field represented by the SAPgui. This is how all numeric fields are displayed via SAPgui. If you don't want to see the 0, then you just change the field type to CHAR and handle accordingly.
Regards,
Rich Heilman

Problem with the quantity field

hi every one
i am facing a problem with the quantity field (vbap-kwmeng)
as per my requirement i need to display this quantity field along with some other item fields from VBAP in an alv grid.
among all the fields displayed in the alv grid only this quantity field is editable(end user can change this quantity)
once end user changes this quantity and press save button i need to capture this new quantity in my internaltable.
problem is input of length of quantity is 15 and the output length is 19
so when i am pressing save
say my quantity is 50 when i am pressing save '0.050' is coming because of the length difference
how can i capture the original changed value.
vamsi

what about define two fields in you inner table ,one as char and the other as vbap-kwmeng, you can show the char one in the ALV gird , when user input value and press SAVE ,you can move the value to vbap-kwmeng.
you can test it,mybe some one has one better idea.

Problem with adding new field to the mass change screen in FBL5N

Hi,
We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
If you have faced with such a problem, we would be grateful if you give us some tips.
Regards,
Miłosz Włodarczyk

The problem has been resolved: we didn't activate a code in SE80.

Problem in Currency field in Abap Query

hi.
I have created an additional field for storing the currency type.
Based on some calculations i want to store the currency type into this additonal field.But the problem is that the currency field is not getting displayed in the report though i am getting the currency type in the additional field when i check it while debugging. Can anyone help me out...

Vimal,
Is it ABAP Query problem(SQ01).If yes, then
In tcode SQ02(Infotype)>press extras button(F5)>In right side you will find 4 tabstrip buttons.Press on Extras--> create variable with same type of currency.
goto Field group button--> add this field to field groups.
In record processing event after your calculations assign your value of cuurncy to this new variable.
In tcode SQ01-->enter query name >F6>F6>F6>select your new varaible
>Press on basic list button(shift+F4)>left side you will find additional fields Node From there select your new field-->Save come back and execute the query.Now you will find your variable.
Don't forget ot reward if useful....

Problem with Update Text fields in Infoset

Hi experts,
Here i would like to rephrase the question. Normaly while working with Infosets, when press "update text fields" button, those fields having text is updated. But one of my field is not updated. I need some help from you for that.
One more question i've that my field is having check table so i would like to know how exactly the text field is updated.
scenario.
Customized IT9320 has field prt_pos added. This field is having check table T528B. But i want text field to be attached is IT1000-STEXT.
How this can be done, because i suspect that just using check table field IT1000-STEXT is not attached to IT9320-prt_pos.
Please help. I'm really got stuck here.
Thanks a lot,
Toral.
Hi,
I'm working on customised Infotype. I need to add one new customised field ie Present Position. This field has number as well as text associated with it. There is a check table attached with this field so that text can be displayed alongwith number.
I need this field in SAP/Adhoc query. But when i go to SQ02 this fields shows only value. Text is disabled for this field. I'm not sure why is it so.
I looked into other infotype which as one field using same data element, and that field shows both value as well as text. Please help me to rectify this issue for present position field.
Thanks,
Toral.
Edited by: Toral Sheth on Jul 4, 2008 2:01 PM

You would be much better off with one multi-line form field.
There are many problems with trying to determine when one is at the end of the display field with text entry.

Additional field in adhoc query

Hi all, I need to be able to report on the IT105 subtype 0001 system ID for employees who are withdrawn from the company, however, when someone leaves their IT105 record is delimited so adhoc query will not output anything. Has anyone coded an additional field that will look at the latest record regardless of the date?
If you have, please can you share the code with me!?
Many thanks!

Hi Tanya ,
Please find the code below. It is designed for additional structure z105_last which is bassed on P0105 type.
data l_it_p0105 type standard table of p0105.
clear: l_it_p0105, z105_last.
call function 'HR_READ_SUBTYPE'
exporting
    tclas                 = 'A'
    pernr                 = peras-pernr
    infty                 = '0105'
    subty                 = '0001'
    begda                 = '18000101'
    endda                 = pn-endda
tables
    infty_tab             = l_it_p0105
exceptions
    others                = 1.
if sy-subrc = 0.
describe table l_it_p0105.
read table l_it_p0105 into z105_last index sy-tfill.
endif.
Regards,
Sergey

Problem with logical database DDF in ABAP query

Hi All,
I have created an ABAP query via the transaction SQ01 using the logical database DDF to retrieve customer master data from tables KNA1 & KNB1. The selection screen used is the screen 903 of the logical database DDF. But now the problem is that when I execute the query, I am getting a blank value in the tax code4(KNA1-STCD4) field though there is value in the KNA1 table for this particular field. This field was added to the table by means of a customizing include. Can anyone suggest a way to get around this problem so that I can view the content of the field STCD4 in the query.
Thanks and regards,
Sarath.

I think it's not used by DDF.
so you must check it with:
check kna1-bran1 in s_bran1.
A.

Problems with EURO currency character

Hi,
I'm trying to insert the EURO currency character (€) in a CHAR field from a Java client but after the insert in the field I find a ? turned upside down.
I'm using
- Oracle DB server 11.2.0.1.0 running with character set US7ASCII (same problem with a different Oracle server with WE8ISO8859P1 encoding) on a Linux Red Hat server
- Java client with JDBC driver 11.2.0.1.0 (ojdbc5.jar) with JDK 5 running on Windows XP: the encoding of the JVM is CP1252.
I've googled a lot but found only solutions like "... change the encoding of the DB ...": I can't change the DB encoding.
Any idea?
Thanks.
Here's is a test case:
************ begin test case ************
Statement stmt = null;
PreparedStatement pst = null;
Connection conn = null;
ResultSet rs = null;
try {
     Class.forName("oracle.jdbc.driver.OracleDriver");
     conn = DriverManager.getConnection("jdbc:oracle:thin:@SERVER:1521:SID", "USER", "PASSWORD");
     stmt = conn.createStatement();
     stmt.execute("CREATE TABLE JJOVA(A CHAR(5) NOT NULL)");
     stmt.close();
     pst = conn.prepareStatement("INSERT INTO JJOVA(A) VALUES(?)");
     pst.setString(1, "€");
     pst.execute();
     stmt = conn.createStatement();
     rs = stmt.executeQuery("select A from JJOVA");
     while (rs.next()) {
          String tmp = rs.getString(1);
          System.out.println(tmp);
     rs.close();
     pst.close();
     stmt = conn.createStatement();
     stmt.execute("DROP TABLE JJOVA");
} catch(Exception e) {
     e.printStackTrace();
} finally {
     try {
          if (rs != null) {
               rs.close();
          if (pst != null) {
               pst.close();
          if (stmt != null) {
               stmt.close();
          if (conn != null) {
               conn.close();
     } catch(Exception dontcare) {}
************ end test case ************
Regards,
Andrea

Thank you Oradba for the explanation of the COBOL program behavior: we're going to change the DB character set (export/import seems not required, we've found an Oracle Note 257722.1 "Changing WE8ISO8859P1 to WE8ISO8859P15"). I'll mark your answer as the (most) correct.
Oviwan, NLS_NCHAR_CHARACTERSET is AL16UTF16: I tried with an NCHAR field but I can't even store correctly accented vowels.
Thank you very much everyone,
Andrea

Problem with JPY Currency

Hello Experts,
We are facing problem with values which are related to JPY Currency.
In the DSO out put for Key figure Amount in doc currency it is showing 110,43 when you double click it is showing actual value that is 11043.
Because of wrong valus we are getting negative values in the Query.
For other currecies values are correct.
Can any body share why it is displaying wrong values.
Regards
Ram

Hi,
I understand your problem,
You can multiply your values by 100 in the transformation start routine to transfer correct valeus.
Hope this helps.
Regards
Venkat

Problem with Group Currency

I looking for help!!
We do a initial loading of financial postings with LSMW. We had a big problem!!
The postings were made without the amount at the group currency.
Now we show it at the reports of Controlling, too late for change the postings.
We need a solution for change this without do a new posting. Someone can help us?
The values at the local currency ARS are correct, we have just the problem with the group currency EUR.

IF the posting were made with out group currency, There is no way you will get the group currency. What you need to do is just load the balances in group currency using the tcode FBB1 and leave document and local currency fields zero.
Assign points if helpful

Facing problem with a date column in select query

Hi,
I am facing problem with a date column. Below is my query and its fainling with " invalid number format model" .
Query: SELECT *
FROM EMP
WHERE trunc(LAST_UPDATED) >= to_date(to_char(22-05-2009,'dd-mm-yyyy'),'dd-mm-yyyy')
LAST_UPDATED column is "DATE" data type.
Please help me Thanks

Radhakrishna Sarma wrote:
SeánMacGC wrote:
WHERE LAST_UPDATED >= to_date('22-05-2009','dd-mm-yyyy');
You do not need the TRUNC here in any case.
I don't think so. What if the user wants only data for 22nd May and the table has records with date later than 22nd also? In that case your query willl not work. In order for the Index to work, I think the query can be written like this I think Sean is right though. Use of TRUNC Function is quiet useless based on the condition given here, since the to_date Function used by OP will always point to midnight of the specified date, in this case 22-05-2009 00:00:00.
Regards,
Jo
Edit: I think Sean proved his point... ;)

Problem with a Currency field in Adhoc Query - HR

Similar Messages

Maybe you are looking for