Problem with Activities

Hello,
I'am facing a problem within the CIC.
Whenever I ceate a new activity, the actual date is automatically filled with the current date.
If I do this the "normal" way (SAP menu -> Activities -> Maintain Activities) the actual date stays empty, even after saving it, only planned date is used.
Process type is the same in both cases.
How can I prevent the automatically filling of the actual date field when using CIC0?
We use CRM 4.0 SP 8.
Best regards,
Torsten

I answer it myself.

Similar Messages

G4 TI4200-VDT8X - problem with activite output

Hi
I can't activ TV or DVI-I output.
In Control Panel I have only D-SUB(VGA) output.
How I van turn on TV-output ?
Mark
Athlon XP 2200+
MSI KT4V
256 MB RAM
Windows 2000

Well, I'm a little confused about that myself. It
was quite feint in the left channel but still there.
Perhaps "Full" right isn't considered 100%? To be honest, I've never touched that because I've always managed to get my speakers set up equidistant from my ears, so all my Macs have never had the Balance adjusted. Can't offer any thoughts there
Still, I feel like a idiot for missing something so
obvious. I'm pretty good with computers (I teach MS
office software - part time gig),
Well you see, there's the culprit. Your brain is full of MS. You're looking for difficult/Complicated/technical fixes when they're not there B-)>
I switched to Mac in March '06. Never going back.
Ahh, still a relatively new switcher. Good for you, and a belated Welcome to the Mac.
Thanks for letting me know about the points too.
I've marked it as "solved" the right way now, I
hope.
Indeed you did. The points themselves are pretty meaningless, but it's nice when someone says "You've helped me!"
Then I'm heading back to the Garage Door for
more reading.
I sent off another article yesterday, and should have another off tonight ... though I don't know when they'll go live, probably sometime this week.
I rated your page on StumbleUpon,
I've never seen them, I'll have to go look.
btw. Apparently I was the first to do so, which
floored me.
Well, I just joined TGD a few weeks ago, and I'm not even sure if Victor has announced the official grand re-opening yet.
Anyway, now other Stumblers will see it.
Well thanks B)
Thanks again!
Any time, it's rather a joy to help pleasant people (or in this case, at least try. YOU solved the problem yourself).

My facetimeicon is exist on notifcation center only and i cannot use it at the same time iam having problem with activiting imessage on my iphone

Hi guy . My facetime exists in notification center only and there is no icon for facetime in the setting pane to activate it after i update to ios7.0.4. At the same time my imessage is taking long time to be activated . Any body can help me plz.

Hi thanks my imessage worked but it is using my email and not my number . In the imessage my iphone number in imessage is not exisiting .what i have there my email and the imessage of my second number on iphone 4 even though when i open apple id on my apple id my number is there

Problem with viewing activities

Hello,
we have SCSM 2012 R2, we have SCSM console installed on 2 computers. Only on one computer we have problem with viewing activities. For example, we go to Work items - Service Request Fullfulment - All Open service requests - Choose one request and open a
form, click Activities, double click on step (RAXXXX) and window with Review Activity details doesn't appear.

Was there a second monitor connected to the computer before and is disonnected now? Sometimes it could happen the activity form will open on the "second non-existing monitor". Do you see the activity form window in the task bar of the affected computer?
If so activate the activity form window, press "alt"+space, select "Move" from the menu and try to move the activity form window to the main screen suing the arrow keys.
Andreas Baumgarten | H&D International Group

Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome

Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome. Works in IE. This is my first time trying to post a question - so please be kind. I am also not good with code and am finding css a real challenge after learning to design based on tables. I'm using CS5.
The "test" page with the slide show is: http://www.reardanwa.com/index-slides.html   The same page without the slide show is http://www.reardanwa.com/
I realize the images are not ideally sized - I'll fix those once I get the pages to function. Maybe I need a different slide show? I would prefer a widget that I can modify to required size & postition. Again - I'm not good at building with code from scratch.
The problem is the naviagation links that are directly next to the slide show do not work in Firefox of Chrome. They do work in IE.
I've read about using jQuery.noConflict(); code but can't figure out the correct way to use it in my case or whether that's even part of the solution. I know my code is not well organized as I have cobbled together from various sources in an attempt to format the page the way the client wants it. Also, FYI, I will eventually try to make the page work in Surreal CMS.
I've spent sevaral days over the last several weeks trying to solve sth slide show/navigation conflict - so any specific light you can shed will be much appreciated.
Thanks in advance.
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Reardan Area Chamber of Commerce</title>
<meta name="description" content="home page for Reardan Area Chamber of Commerce" />
<meta name="keywords" content="Reardan WA, chamber of commerce" </>
<script src="scripts/jquery-1.6.min.js" type="text/javascript"></script>
<script src="scripts/jquery.cycle.all.js" type="text/javascript"> </script>
<script type="text/xml">
</script>
<style type="text/css">
                              #slideshow {
                                  padding: 10px;
                                        margin:0;
                              #slideshow-caption{
                                        padding:0;
                                        margin:0;
                              #slideshow img, #slideshow div {
                                  padding: 10px;
                                  background-color: #EEE;
                                  margin: 0;
body {
          font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
          background: #004B8D;
          margin: 0;
          padding: 0;
          color: #000;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
          padding: 0;
          margin: 0;
h1, h2, h3, h4, h5, h6, p {
          margin-top: 0;           /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
           /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
.left
position:absolute;
left:0px;
.center
margin:auto;
width:95%;
.box
          position:relative;
          left:-90px;
          width:950px;
          height:350px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
          z-index:1000;
.slide{
    position:absolute;
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
          border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
          color: #42413C;
          text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
          color: #6E6C64;
          text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
          text-decoration: none;
/* ~~this fixed width container surrounds the other divs~~ */
.container {
          width: 960px;
          min-height:900px;
          padding:5px 0px 0px 0px;
          background: #E8F8FF;
          margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
/* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
.header {
          background: #E8F8FF;
          padding:10px 5px 0px 5px;
.sidebar1 {
          float: left;
          width: 225px;
          margin: 60px;
          color: #FFFF0D;
          background: #595FFF;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
          padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
    z-index:-1;
.sidebar2 {
          float: left;
          width: 275px;
          color: #FFFF0D;
          text-align: left;
          background: #595FFF;
          padding-bottom: 10px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    border: 3px solid #F7F723;
    z-index:2;
.sidebar3 {
          float: left;
          width: 275px;
          color: #FFFF0D;
          text-align: left;
          background: #595FFF;
          padding-bottom: 10px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    border: 3px solid #F7F723;
    z-index:3;
.content {
          padding: 0px 0px 0px 0px;
          width: 780px;
          float: left;
          background: #E8F8FF;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
          padding: 0px 15px 5px 10px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
ul.nav {
          list-style: none; /* this removes the list marker */
          border-top: 0px solid #FFFF66; /* this creates the top border for the links - all others are placed using a bottom border on the LI */
          margin-bottom: 50px; /* this creates the space between the navigation on the content below */
          font: Arial Black, Verdana, , Helvetica, sans-serif;
          font-size:1.3em;
          font-weight:bold;
          z-index:2;
ul.nav li {
          border-bottom: 0px solid #FFFF66; /* this creates the button separation */
          font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
          padding: 3px 0px 5px 0px;
          display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
          width: 185px; /*this width makes the entire button clickable for IE6. If you don't need to support IE6, it can be removed. Calculate the proper width by subtracting the padding on this link from the width of your sidebar container. */
          text-decoration: none;
          color: #FFFF0D;
          background: #595FFF;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
          background: #595FFF;
          font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
          color: #FFFFFF;
/* ~~ The footer ~~ */
.footer {
          padding: 10px 0;
          background: #595FFF;
          color: #FFFF0D;
          position: relative;/* this gives IE6 hasLayout to properly clear */
          clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
          float: right;
          margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
          float: left;
          margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */
          clear:both;
          height:0;
          font-size: 1px;
          line-height: 0px;
-->
</style>
</head>
<body>
<div class="container">
<div class="header">
<a href="#"><img src="images/Chamber-Logo-2.gif" alt="Reardan Chamber Logo" width="187" height="163" hspace="10" vspace="5" align="top" /></a><img src="images/Reardan-Chamber-Title.gif" width="476" height="204" alt="Reardan Area Chamber of Commerce, Dedicated to Preserving and Enhancing Area Businesses" /><p></p>
<p style="color: #F00">This Site is under construction! Please pardon our dust as we create!</p>
</div>
<div class="sidebar1">
    <ul class="nav">
      <li><a href="about.html">About Us</a></li>
      <li><a href="history.html">Reardan History</a></li>
      <li><a href="activities.html">Activities</a></li>
      <li><a href="business.html">Business<br />
        Directory</a></li>
      <li><a href="about.html">Join the<br />
        Chamber</a></li>
       <li><a href="links.html">Links<br />
  <span style="font-size: 85%">Tourism</span><br />
      </a></li>
    </ul>
     </div>
<br />
<br />
<br />
<br />
<div class="box" +"slide">
<script type="text/javascript">
// BeginOAWidget_Instance_2559022: #slideshow
                           slideshowAddCaption=true;
$(window).load(function() {
$('#slideshow').cycle({
                    after:                              slideshowOnCycleAfter, //the function that is triggered after each transition
                    autostop:                              false,     // true to end slideshow after X transitions (where X == slide count)
                    fx:                                        'blindX',// name of transition effect
                    pause:                              false,     // true to enable pause on hover
                    randomizeEffects:          true, // valid when multiple effects are used; true to make the effect sequence random
                    speed:                              100, // speed of the transition (any valid fx speed value)
                    sync:                              true,     // true if in/out transitions should occur simultaneously
                    timeout:                    5000, // milliseconds between slide transitions (0 to disable auto advance)
                    fit:                              true,
                    height:                       '300px',
                    width:         '525px'   // container width (if the 'fit' option is true, the slides will be set to this width as well)
function slideshowOnCycleAfter() {
          if (slideshowAddCaption==true){
                              $('#slideshow-caption').html(this.title);
// EndOAWidget_Instance_2559022
</script>
<div id="slideshow">
    
    <img src="images/100_1537.jpeg" width="600" height="450" title="caption for image1" /> <img src="images/Parade-2011-2.jpg" width="300" height="225" title="caption for image2" /> <img src="images/100_1495.jpeg" width="600" height="450" title="caption for image3" />
    <div title="sample title"> Images for slide show will need to be re-sized to fit box to avoid distortion</div>
    <img src="images/beach4.jpg" width="200" height="200" title="caption for image4" /> <img src="images/beach5.jpg" width="200" height="200" title="caption for image5" /> </div>

<div id="slideshow-caption"></div></div>
<div class="sidebar2" "anotherClass editable"><p align="center"><strong>Chamber News</strong><br />
Local News item
<br />
Another New item</p>
<p align="center">lots of news this week<br />
    <br />
    <br />
    <br />
</p>
</div>
<div class="sidebar3" "anotherClass editable"><p align="center"><strong>Upcoming Events</strong></p>
<div align="center">    <a href="activities.html" style="color: #FFFF0D">Community wide yard sales</a><br />
    <br />
    <br />
    <br />
    <br />
</div>
</div>
<div class="content"><br />
<br />
</div>
<div class="footer">
        <p align="center"><span style="font-size: small">Reardan Area Chamber of Commerce</span><br />
          <span style="font-size: x-small">[email protected] - 509.796.2102</span><br />
        </p>
        
</div></body>
</html>

If you DO want the slideshow overlaping the navigation try the below css:
.sidebar1 {
    float: left;
    width: 225px;
    margin: 60px 0px 60px 60px;
    color: #FFFF0D;
    background: #595FFF;
    border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
.box {
float: left;
margin-left:-60px;
width:700px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;

Problem with follow-up transaction from task

Hello,
I have a problem with creating follow-up transaction from tasks. Here is the problem,
I've defined two new transaction types Z010/Z020 with business transaction category BUS2000125 TASK and I want to be able to create follow-up transaction from them. After defining them I've mapped the copying control so that I'm able to create opportunities, tasks and leads from those transaction types. However, when I'm testing there is a problem. Here are the steps I'm performing:
1: I'm creating a new Task from any of those two transaction types (Z010/Z020)
2: I'm saving the transaction and then I save it.
3: Open the transaction More -> Create follow up
4: A pop-up window appears with the possible follow-up transactions (in this case task/opportunity or lead).
5: I click on any of those but nothing happens - no indication of error or whatsoever the screen just stays the same and I'm able to click on More -> Create follow up and choose any of the possible entries. However, there is no result.
I have a requirement for follow up transactions from opportunities and everything works just fine there, the problem is only with Tasks. I've tested this from the backend (CRMD_ORDER) and I'm able to create a follow-up from this transaction types (Z010/Z020), so the problem seems to be something with the CRM UI. If any of you have an idea why is this happening and how to fix it, please tell.
Thanks in advance!

Hi John,
Please refer as well to note 661305:
this part:
Note:
As of CRM 7.0, this modification is no longer required because the IMG
activity "Activate Copying Control for Activities" is provided (maintaining the
table/view CRMC_ACT_COPY_SW in transaction SM30). Here you can decide whether
the copying control for activities and tasks (BUS2000126 and BUS2000125) is
active or inactive depending on the specific client.
IMG path
(transaction SPRO):
Customer Relationship Management
-->
Transactions
--> Settings for Activities
--> Activate Copying
Control for Activities
In the standard system, the copying control for
tasks and activities remains inactive.
========================================================
Best regards - Christophe

I game online and have problems with games working after updating firefox. I use an older version but am concerned about security. Two questions: can I be sure that Firefox 4 will work on my system (vista) and where do I save the file at?

I have had a problem with the compatibility of Firefox running with the games I play online. I don't want to attempt an upgrade again, only to have to turn around and degrade so my activities can work. Furthermore, I'm not sure where to save the Firefox file in my system, since for some reason it doesn't take me right to where it should save.

This issue can be caused by the Yahoo! Toolbar extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Problems with TV Out signal after upgrading to iOS 5.1

Has anyone experienced problems with TV Out signals on their iPad 2 using the Apple HDMI Adapter after upgrading to iOS 5.1? I am trying to connect to my HDTV after upgrading and cintunally receive an "Unsupported Video Signal" message with a blank/back screen. Prior to upgrading, I had no connection problems and could view TV Shows, Movies, Music Videos, Keynote, etc...without problems. I've been unable to find any resolution to this problem, even followed Apple guidance to detach and reattach the HDMI adapter without success. Seems like a software bug to me and it's a major problem when trying to conduct business or personal activities. Hopeing Apple has a fix in work already...anyone else have any ideas? Thx in advance...

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.
If that does not work, restore the iPad to the factory settings.

Problem with plasma-desktop

After upgrading to kde 4.7 I've a problem with plasma: after login my screen is black with no panel. If I open a terminal and i launch plasma-desktop I obtain the following errors:
giacomo@arch:~$ plasma-desktop &
[1] 8737
giacomo@arch:~$ QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
## Loading catalog liblancelot-datamodels
Object::connect: No such signal KWindowSystem::windowChanged(WId,unsigned long*)
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
Application asked to unregister timer 0x0 which is not registered in this thread. Fix application.
QGraphicsLinearLayout::removeAt: invalid index 1
plasma-desktop(8738)/kio (KDirWatch) KDirWatchPrivate::removeEntry: doesn't know ""
QImage::scaled: Image is a null image
QImage::scaled: Image is a null image
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setRenderHint: Painter must be active to set rendering hints
QPainter::setPen: Painter not active
QPainter::setFont: Painter not active
Kross: "Loading the interpreter library for qtscript"
Kross: "Successfully loaded Interpreter instance from library."
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setRenderHint: Painter must be active to set rendering hints
QPainter::setPen: Painter not active
QPainter::setFont: Painter not active
plasma-desktop(8738)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application
giacomo@arch:~$ QImage::scaled: Image is a null image
plasma-desktop(8738)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
QGridLayoutEngine::addItem: Cell (0, 1) already taken
setting locale to "utf-8" and encoding to "utf8"
Why plasma isn't running after login?

So dbus has to be the first daemon placed in the rc.conf list?
Yesterday evening I tried to delete the file /home/giacomo/.kde4/share/config/plasma-desktop-appletsrc and reboot: at new kde startup the screen was black but there were a panel in the low edge of the scrren, so plasma-desktop was running, but the desktop backgroung was not set. I re-apply all my settings (comic strip, cwp and system monitor) and at the next reboot plasma crashed again.
When I come back to home I try to deactivate plasma activities and to change my rc.conf.

Problem with checkin activity

Hi All,
I have problem with Checkin and CheckOut activities while I am trying to work with BAPI's.
I have an iView that is deployed on the portal server. Initially when I am trying to make changes in the iView, they were getting effected in the server. But, once I had created a model and started using BAPI's I could not CheckIn properly and activate. So, the changes are not getting effected. It is asking for "ACTIVATE WITH ALL PREDECESSORS" and even when I asked to do so, the changes are not getting effected. Also, I have tried it many a times and still all the previous checkin activities are persisting and I couldnt workout with the changes.
Anyone would please check the problem and give me a solution.
Regards,
Murthy.

Hi Sandip,
The dc is build in the local environment when you do a DC build. The build uses the jars from DCs,SCs in local dummy track in NWDS.
When you do a dc build in NWDS you gets a build log. You can check what are the errors which are causing the problems.
Similarly, the dc's in repository (DTR) are build using the CBS (build service). Check in CBS build log what are the errors. Whenever you submits an activity and mark to be activated, CBS build is triggered. Hence there is build log for each activity marked to activated. Check in the build log what are the errors.
Its realy hard to identidy what are the specifc problem in your case.
There can be
- Some file not submitted and causing build failure
- Some dependency (jars from DCs,SCs) missing on the DTR track
- Compile Problems in the java code
- or anything other.....
Ensure that build is fine. You will be able to see the changes if you deply application from CBS,CMS then.
Regards,
Ashwani Kr Sharma

Problem with BP. Assignment: Business partner person to user not unique

I have a problem with a user. They have no BP assigned in PPOSA_BBP. We have found a BP in transaction BP.
When we try the BBP_BP_OM_INTEGRATE the message BBP_UM_UI048 appear" Assignment: Business partner person to user not unique" .
Any idea about how solve this??
Best regards
Jorge

Hi
Which SAP version are you using ?
The user needs to be attached to the Org Plan. (PPOMA_BBP)
Have you maintained the Contact person for this USer in the Org Plan. (PPOMA_BBP) ?
Please check the consitency of this BP as well.
Have you read the documenattion of the Transaction -> BBP_BP_OM_INTEGRATE ?
If no, here it is..
Transaction -> BBP_BP_OM_INTEGRATE
Short text
Object Synchronization and Repair
Purpose
This report enables you to run a consistency check for the integration of HR Master Data and Business Partner data. If not all data exists for the business partner, you can first synchronize data. When synchronization is run for organizational units, the basic data (name, description) and the address data is included; when synchronization is run for central persons, bank information is included in addition to the basic data and address data.
Prerequisites
To be able to run this report, integration between Organizational Management and SAP Business Partner must be active.
Features
This section contains information about the functions you can use to select and output data.
Selection
The following options enable you to restrict the selection of objects:
Central Person
In addition to selecting central persons created during integration between HR Master Data and Business Partner data, you can also select central persons who have been created locally. However, central persons created locally are not checked for consistency.
Employee (object type P)
This selection option is only available in HR systems. The corresponding central person is displayed together with the person. Both objects are kept consistent in the Basic Data, Address, and Bank Data columns.
Positions
Business Partners (Employee role)
Users
Organizational Unit(s)
You can specify specific organizational units for the selection.
Business Partner (Organizational Unit role)
Note:
The selection objects Position, Business Partner (Employee role), User, and Business Partner (Organizational Unit role) are only available if an implementation of BAdI HRALX_HRALXSYNC_BADI exists.
Branch as of Organizational Unit
This option enables you to select all objects in the structure for one or more organizational units. You can also restrict selection according to one of the following object types:
Central Persons Only
Employees Only
Positions Only
Business Partners Only (Employee role)
Users Only
Organizational Units Only
Business Partners Only (Organizational Unit role)
Include All Object Types
Changes Since
All organizational units and central persons for which changes have been made since the last time all objects were synchronized are read. When all objects have been synchronized successfully, a new change date is set.
Note:
If a selection has been made but the relevant input field remains blank, all objects of a particular object type are read from the database. This condition can lead to a long runtime, therefore, SAP recommends you also enter a restriction.
Output
The organizational units and central persons that have been found are displayed in a list that includes status data.
To facilitate navigation, a hierarchical tree structure is displayed on the left-hand side of the object list. The branches are sorted according to the type of action that is to be executed.
If an implementation of BAdI HRALX_HRALXSYNC_BADI exists, checks from this BAdI are executed in the External Checks branch.
If you double-click on the folder icon in the navigation tree, all objects are displayed in the list.
Note:
Meaning of status display for data in the Basic Data, Address, and Bank Data columns:
Icon Message Text Meaning
Green traffic light Business partner does not need to be synchronized with HR object data All business partner data is consistent with HR object data.
Yellow traffic light Business partner does need to be synchronized with HR object data Business partner exists. The business partner data is not consistent with the HR object data.
Red traffic light Object data is new and must first be created for the business partner The business partner does not yet exist or the the business partner data is incomplete.
No traffic light Object type does not include this type of data Check type is not relevant for this object.
Activities
To integrate business partners or to repair selected objects, you must select the relevant lines in the object list and choose Execute. Any errors that occur are displayed after synchronization.
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Problem with Restricted Recruiter Requisition Status Change Approval Proces

Hello,
Our company is having a problem with Recruiters recieving any approval notifications for requisitions where the status change is performed by someone logged on as a Restricted Recruiter. The approval notification never appears in the Recruiters approval page. The Restricted Recruiter is able to submit the request without any problems.
I was hoping that someone could help point me in the right direction so that I may begin troubleshooting this.
Thanks for your assistance.
Ryan

I have been doing some digging on this matter on E-Recruiting workflow and have discovered transaction SWI2_FREQ (Work Items per Task), very useful. Upon running this utility I found 8 pending approval request tasks. I double clicked on the task to show the workflow status of each task.
I double clicked on one of the request for status change tasks for a requisition which took me to the approval request for status change of Req ########. Here I clicked on the activities tab selected the activities tab, selected the activity Approval request for status change of Requisition ######## then clicked on the execute icon.
Doing this opened up a new web browser and prompted me to login. Using the correct login credentials for this environment I click the login button and promptly recieve the error message...
Error in Web service execution
E:SWF_HTTP:050 TS51807979
At this point I am unsure of where to go...
Any help would be appreciated.
Ryan

Problem with po receipts confirmation customization

hi
i have a problem with po receipts confirmation customization
previously once po is approved and run the po receipts confirm concurrent
program then work flow will be triggered
they add 15 days more to the due date
but my requirement i s have to add 15 days to the po approved date.
in the PORCPTWF .get_order_info procedure they wrote a code
due date is standard attribute in the po confirm receipts workflow....
they assign due date to
x_exp_receipt_date := wf_engine.GetItemAttrDate ( itemtype => itemtype,
itemkey => itemkey,
aname => 'DUE_DATE');
and then
x_due_date_plus_15 := x_exp_receipt_date + 15;
wf_engine.SetItemAttrText ( itemtype => Itemtype,
itemkey => Itemkey,
aname => 'DUE_DATE_PLUS_15',
avalue => x_due_date_plus_15 );
but i need to get po aproved date so there is a select statement in the same procedure i have added approved_date from po_headers and retrived into
a variable x_approved_date;
SELECT poh.segment1,
pov.vendor_name,
poh.agent_id,
poh.note_to_receiver,
poh.approved_date -- i added this
INTO x_po_number,
x_supplier_name,
x_buyer_id,
x_note_to_receiver,
x_approved_date -- i added this
FROM PO_HEADERS poh,
PO_VENDORS pov
WHERE po_header_id = x_po_header_id
AND poh.vendor_id = pov.vendor_id (+);
then
i have created a approved_date attribute in the po confirm receipt workflow
since there is no standard attribute related to approved dat
and in this procedure i wrote
x_approved_date_plus_15 := x_approved_date + 15;
wf_engine.SetItemAttrText ( itemtype => Itemtype,
itemkey => Itemkey,
aname => 'APPROVED_DATE',
avalue => x_approved_date_plus_15 );
but its not working
any suggestions....please

I see that the steps you have performed is correct.
1. You created an Item Attribute APPROVED_DATE in PO Confirm Receipts workflow definition.
2. In a function activity, queried approved date from PO Headers and added 15 to it and set this new value to Item Attribtue APPROVE_DATE. (Though it is ok, you may use SetItemAttrDate for a Date Type Item Attribute as a good practice).
3. You should be able to access this Item Attribute in any of the function activities after the above activity or assign this Item Attribute in a Message Attribute and display it in a Notification Message.
I would need more information on What is not working (?) in this in order to provide assistance.
Thanks
Vijay

Problem with TOAD

Hi all,
I've problems with usage of Toad by developers deploying and monitoring on a production environment, that causes performance problems.
In particular addm reported that there is a statement (select from GV$SESSION) frequently launched by Toad that impacts on DB performance (even if i suppose that this kind of statement does not have great cost in terms of resource usage).
How can i prevent, if possible, this kind of problem (suggesting some good rules to my colleagues or changing toad settings)?
How can i block access to the database through toad?
Thanks a lot for responses!!
P.S.: sorry for my english :-P
Jacorobo

In addition to blocking access via TOAD, or any other tool, you can limit the user's access to the catalog. One way to do this...
Create a new role something like APP_DEVELOPERS
grant select on prod tables to APP_DEVELOPERS
grant any subordinate roles necessary to APP_DEVELOPERS
grant create session to APP_DEVELOPERS
grant select on DBA_ tables you wish the developers to see.
DO NOT grant any privileges on V$ views (or underlying tables).
Grant this role to your developers.
Revoke all system privileges and other roles from your application developers.
Now you have restricted the activities of your application developers in production, regardless of the tool they use.

Problems with MIDI, Sound, Etc.

Hi all,
Well, I have grown up on Macs and my dad has brought home everything from the Plus to the IIci to the Classic Colour when I was a kid 20 years go. Circumstances have forced me to move to PC, and I even had one in my home studio, but I recently had the chance to upgrade and was absolutely thrilled at the prospect of getting back into the Mac world after more than 10 years of absence. So, I got myself a Mac Mini 2.53 GHz (I only upgraded the hard drive to a 500 GB 7200-RPM model, as is common in the audio world), with a Focusrite Saffire 24 Pro DSP Firewire audio interface.
Well, I am saddened to say that so far, I have been BITTERLY disappointed. Problems :
1. This Mac is NOISY!!! I don't mean physical computer/fan/etc. noise. I mean static noise going through the interface. The interface is dead-silent during bootup until, at some point in the sequence (when looking at the Apple logo during bootup), the same static hiss and hum comes back that's been plaguing me for a few days. This noise seems to be matching my activities - it changes when I scroll, when I open a program, etc., for example. So, this is DEFINITELY sub-par;
2. Snow Leopard simply refuses to acknowledge my Roland XV-5050's existence on USB. Ableton Live can find it in its list of "destinations" for MIDI data, but Audio Midi Setup simply refuses to even see it, precluding me from using Roland's very handy Editor. Again, unacceptable, given that I've never had this problem with PCs (although, Roland expressly does not support Vista with the XV-5050 USB drivers);
3. There's something weird about the Mac (could also be Live, I suppose, but I never had this problem on PC) where my music applications do not see the Korg Legacy Cell VSTs that are installed, even though they are in the same folder as, say, Sylenth, which Live DOES see. (And they all end in .vst extensions.) What gives?
I think that's it so far. I've got a very important gig coming up around Christmas time that I have to start getting ready for. I had anticipated virtually zero problems with the Mac, which is why I chose to upgrade, but the reality is definitely otherwise. Please, PLEASE don't make me buy the Dell Studio or something!!
Thanks in advance for all the help!
JS

Korg Legacy and the XV are not critical to my workflow, just items I had invested on I would like to keep. I did not research compatibility with Snow Leopard vwery thoroughly for those two, but I certainly did with the interface, which IS critical. Focusrite has released brand-new drivers that are supposed to be compatible with Snow Leopard, as they loudly trumpet on their web site.
And by and large, they do work - there's just that incessant noise. And THAT's an issue, and somehow I doubt it has to do with the interface as, like I mentioned, the noise only appears during the bootup sequence when, I assume, the Firewire drivers are loaded.
Inputs?

Problem with Activities

Similar Messages

Maybe you are looking for