Problem with Restricted Recruiter Requisition Status Change Approval Proces

Hello,
Our company is having a problem with Recruiters recieving any approval notifications for requisitions where the status change is performed by someone logged on as a Restricted Recruiter. The approval notification never appears in the Recruiters approval page. The Restricted Recruiter is able to submit the request without any problems.
I was hoping that someone could help point me in the right direction so that I may begin troubleshooting this.
Thanks for your assistance.
Ryan

I have been doing some digging on this matter on E-Recruiting workflow and have discovered transaction SWI2_FREQ (Work Items per Task), very useful. Upon running this utility I found 8 pending approval request tasks. I double clicked on the task to show the workflow status of each task.
I double clicked on one of the request for status change tasks for a requisition which took me to the approval request for status change of Req ########. Here I clicked on the activities tab selected the activities tab, selected the activity Approval request for status change of Requisition ######## then clicked on the execute icon.
Doing this opened up a new web browser and prompted me to login. Using the correct login credentials for this environment I click the login button and promptly recieve the error message...
Error in Web service execution
E:SWF_HTTP:050 TS51807979
At this point I am unsure of where to go...
Any help would be appreciated.
Ryan

Similar Messages

Recruiting Requisition: Status Overview iview not refreshed

Hi
When new E-recruitment requisitions are created its not getting updated in the iview - Recruiting Requisition: Status Overview.
Its getting updated after many hours only. Can anyone provide the solution for refreshing the iview with the latest requisition say within few minutes.
Regards,
Sasha.

Hi
Can anyone please provide an input on this.
Regards
Sasha.

HT5622 Due to problems with my original email I changed my apple id email and password months ago. Suddenly it is reverting to my old email. How do I get it to totally forget the original? I have iPhone, iPad and MacBook Pro.

Due to problems with my original email I changed my apple id email and password months ago. Suddenly it is reverting to my old email. How do I get it to totally forget the original? I have iPhone, iPad and MacBook Pro.

Hey 1Jerry,
Thanks for the question. You'll want to delete and re-add your iCloud account (utilizing the new Apple ID address). When prompted, opt to keep as much information on your device as possible. The following article provides information on how to do so:
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Turn off iCloud completely
Depending on whether you want to stop using iCloud on all or only some devices, do one or more of the following:
On your iOS device’s Home screen, tap Settings > iCloud, then at the bottom of the screen, tap Delete Account.
Thanks,
Matt M.

I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted??

I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted? Maybe Itunes thought that I was someone trying to copy my old podcast because I kept the same name, I tried to change the names but it looks like I'm on a blocked list...

There is a procedure for changing the feed URL for a podcast, which it seems you haven't followed: you have to add a special tag to the old feed - just submitting a new feed will have exactly the effect you describe. The proper method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move

Problem with Restrict Access to Page with access level using ASP

I'm using Dreamweaver CS3 with ASP-VBScript and an Access
database. The pages were created from scratch for this project,
using those tools all the way through.
I've created a login page, an admin homepage, and add, edit,
and list records pages for three tables. The login page uses the
Server Behavior "Log in User", all other pages use the Server
Behavior "Restrict Access to Page". All of these are based on an
Access Level.
Login seems to work correctly, and redirects to the admin
homepage. From the admin homepage, I can open any other page as
expected, and they initially display correctly. On the add and edit
pages, however,
submitting the form often results in getting logged out, but
not always.
Once this happens, I can log back in, but other problems will
sometimes occur during that second login session. Sometimes,
logouts will occur on pages that worked fine during the first login
session. Sometimes, another session variable that I've setup
manually will change when it shouldn't...as if there were two
values stored for my session variable, and reloading the page
changes to the other value.
This
post seems closest to my experience, but it doesn't look like
there was really an answer beyond "I had to fight with it for a bit
to get it to work":
I suspected that there is some problem with session settings
on the server. We have an almost identical tool on the same server
that was developed with an older version of DW that works more
reliably; it sometimes has problems with the initial login, but
never has a problem after that.
Has anyone experienced problems like this? Any suggestions
for what to check? I'm really pulling my hair out since it's so
unreliable...the kind of problem that goes away when you try to
show someone and comes back when they leave.

Hello,
I was thinking that all I would need would be the username, although username and paswsword would be more secure. There are about 50 users and no groups or levels. They are all equal ... same level.
The website is private and there is a general content area for all users and then there will be private areas for each user where proprietary documents will be held. I need to be able to ensure that user 'A' can only see the user 'A' pages, user 'B' can only see user 'B', etc.
I don't really understand what the Dreamweaver script is doing, but the overview sounded like it was the right tool to accomplish what I'm trying to do.
Any assistance greatly appreciated.
thanks.

Problems with E-Recruiting Data Overview Smartforms

Hello,
We recently upgraded from E-Recruiting 3.0 sp12 to sp15. During this upgrade we have noticed that our custom Data Overview Smartforms have not being displayed. Instead the system is calling the original SAP delivered forms. The problem is that in table T77RCF_UI_PARAM we have the parameters set to display the correct forms. As strange as that sounds we were able to fix most of them by changing the case, i.e. from lower to upper or upper to lower, of the BSP application name. We are still however having problems with one particular BSP application:
Name Paramtyp Parameter
HRRCF_CAND_DOVR DISPLAY_PDF Z_ER_CANDIDATE_PREVIEW
HRRCF_CAND_DOVR SF_VIEW_CAND Z_ER_CANDIDATE_PREVIEW
The SAP delivered smartform is HRRCF_CANDIDATE_PREVIEW.
This one, regardless of what case the BSP application is in, continually displayes the SAP delivered smartform.
I have verified that the custom form is indeed active. And we also went as far as appying oss notes:
Note 1017662 - T77RCF_UI_PARAM: Application name is case-sensitive
Note 1037121 - T77RCF_UI_PARAM: Length of Input Field Parameters too short
Yet another twist to this is that when I log on as an Internal Candidate and click on the Data Overview link on the external candidate personnel page the custom form is displayed. However, when I log on as an External Candidate and click on the same link the SAP delivered form is displayed.
Could this have something to do with the type of roles assigned? Just incase I verified that the roles for the External Candidate were indeed SAP_RCF_EXTERNAL_CANDIDATE and the internal role was SAP_RCF_INTERNAL_CANDIDATE.
Any help would be appreciated!
Respectfully,
Ryan

Well the error you are facing, that the external candidate does not see the custom smartform depends on a new BSP application that is delivered with SP14.
You need to copy the customizing of hrrcf_cand_dovr to hrrcf_cdovr_ext.
Regards

Problem with navigation and masthead by changing languages with Anonymous

Hi All,
i have a problem with navigation and masthead by changin the language when accessing as anonymous user.
Ive created two additional users anon_de (with language german )and anon_en (for english).
I've created also two links in the in masthead:
/irj/portal/anonymous?guest_user=anon_en and /irj/portal/anonymous?guest_user=anon_de
When i choose "de" for the first time it works fine, but when i choose "en" again the language in the content are is changing to english again, but not in navigation and masthead. When i click again on link for "en" the languge is set to english. Strange thing is that when i click on "de" instead the portal content change to german but masthead and navigation are in english now, as it should be before....
It seems that masthead and navigation have always prevoius language selected.
Do you know, what could be the reason of that strange behavior?
Thanks for help
Karol

Hi Detlev,
you are right. the user is not "updated" fast enough... the strange thing is, that it works by the first time i change the language...
well.. i can implement that workaround as you suposed, but it would be a really workaround as the same page will be requestes second time, causing requests number to be double..
Thanks for help
ps. i forgot to mark this message as question to give points.. if you tell me how i can change that ill reward your answer..

Problem with cvdm-csm-1.1 change default slot in configuration

Hello
I've got problem with this software. On my router 7606 I have install csm on module number 3. After installing software in router I get message No CSM in slot-1. Where can I change configuration this software to get information for slot-3 ?
Thanks for advice.
Marcin

Hi Jayan,
Our PI alert configuration is fine. And also we did not choose multiple suppress method. Problem is with Solution Manager CCMS PI alert configuration for failed RWB count. After initil alert and then nomore alerts are triggered. If I complete the alert then again only first alert is triggered and again no alerts going forward. Please advice.
Thanks,
Kavitha Rajan.

Problem with multiple delivery items status

Hi Experts,
Printing of the packing list is trigered when the header packing status is "C" of the Outbound delivery.
But when the OBD has multiple line items, the status of the header packing status is "C" when
One line item is compleately packed and packing of other line items is not started.When the second line item
packing is started (partial packing) the header status changes to "B",this will be "B" till completion of the
secon line item once the second line item packing is completed again the Header status is changing to "C"
because of which we are getting multiple printouts of the packing.
Can anyone help us how to get one print out packing list after packing all line items of the deliver.
HEADING: mULTIPLE PRINT OUTS FOR PACKING LIST OF THE DELIVERY

Hi Justin,
At first, when I would 'Find Devices' under my connected target, I would get a prompt asking to name the FieldPoint item (default being something like [email protected]). This occured for the first three or four seperate cFP-2010's : I would end up with a unique 'FieldPoint' Items folder for each individual target. However in some instances, when I would 'Find Devices', it would immediately bring cursor focus back to a previously linked 'FieldPoint Item', from another/previous cFP-2010.
I use the verbage 'linked', because when I do a 'Go To Comm Resources Configuration' or 'Go to Items Configuration', it would go to/from DataNeighborhood/Remote Systems.
How does MAX link the Item Configuration to a Comm Resource? Is it a unique ID within the target?
V/R,
Jamie
v2009 devel. w/RT

Problem with Restricted Key figure!

Hello BW Gurus,
Currently I am having problem with a report that is using a restricted key figure in the formula. When I filter down this restricted key figure, it is working fine but when I use this restricted key figure in formula that calculate greater than value, its giving me wrong figure and when I calculate less then value, its giving me zero total result. I am drilling down this restricted KF on a hierarchy. Did I miss any setting or do I need to do anything extra for this?
Please let me know and thanks in Advance,
Vaghar.

In that case create two calculated keyfigures CKF1 and CKF2 such that
CKF1 = ((Count >100)*1 + 0)
CKF2 = (Count<100)*1 + 0)
and then define Greater Count as a formula such that
Greater Count = Count (CKF1)
and similarly Lesser Count = Count (CKF2).
where Count is a data function which gives a value of 1 when the operand <>0 and returns a 0 when the operand = 0.
Hope this helps.

Problems with the display when I change the view

Hi,
I have recently downloaded th emost up to dat everion of itunes and I have a problem when I change the view. All I get is a black screen down the right hand side where the library details sit. This eventually clears but is **** annoying. It also happened when I had version V7.01 running.
Any ideas?
Thanks,
Fujitsu Siemens MS 6567V2 Windows XP

Helpful AnswerRe: Have anyone problems with the dock? when I start the imac it doesn't appears
27-jun-2011 15:58 (in response to pocoto)
If you run Parallels, this is one of the symptoms of this issue:
http://kb.parallels.com/en/111541
Regards,
Captfred
Like (0) Reply
Captfred post me this page, follow the instrutions on parallels preferences and for me it works. Try it and let us knows if it's works for u too..Regards

E-Recruiting : Requisition status

Dear experts ,
Please throw some light on the following thoughts :
I can see that if the object NB has status draft,released,on hold or closed, i can assign candidates to the Requisition.
Is this the standard system behaviour? or have i missed something here.
Can someone explain the need/provision to assign candidates to a requisition when it is in status Draft, On Hold or Closed?
Thanks in advance,
Sowmya

Hello Sowmya,
I'll give you two answers please choose which you like.
The scientific process focused one
- it is necessary to assign applicants / candidates to requisition in status draft if you want to evaluate if a publication of the requisition is necessary or if you are confident to do the hiring based on your candidate pool only. In addition assignment must be able when you are redoing requisition and posting for better applicant address or changed requirements. This also requires status draft while the exisiting hiring process has to continue.
- it is necessary to add applicants to the requisition in status closed if you have already closed it as you thought you were finished but in the last moment the candidate does not show up. Espacially combined with mass hiring where a single requisition means many positions filled this can be a valid issue (often happens with apprentices). If you use the approval process it is often very handy to not set the status back to released as it would require new approval which makes no sense.
- adding candidates in status on hold is used to put spontaneous applicants to requisitions wich soon will be open (as far as the on hold is temporary) so you do not loose a suitable candidate int the depths of the candidate pool where it gets probably lost.
The unscientific but probably true one
- if you ever would have worked in hr you would have learned that no matter what is done for process design (which is often done by organization experts of hr the other hr guys do not like) recruiter will not give a s*** about the processes. They will do what they think it is right. Process designs do not care. But to be fair this is not only caused be the hr guys but by the field of work. You can define a process which requires 2 screenings and 4 tests for hiring and still the upper management shows up with a candidate and says "hire him!". So a real process flow control in a sense of the restriction of action posibilities will fail. So the reason for the status of requisition is not to say you can assign someone or not, it is more a guideline how far the process is and to filter them in the lists. You can assign a candidate whenever you want as not recruiter would accept a stronger restriction.
Best Regards and Happy E-Recruiting
Roman Weise

Problem with the iPod memory status colour bar in iTunes 7

Hello
The iPod memory status bar in iTunes (the one with different colour bars that show the proportion of total memory filled by music, video, photos, other) says that 26gb of my 30gb iPod is filled, and 26gb is free. Clearly that cannot be the case as that's way over 100% of the iPod's memory. Resetting the iPod has not solved this problem as when I fill it back up with songs, videos etc this glitch returns. Can anyone help please?
Tim
iMac Core Duo Mac OS X (10.4.8)

I tried formatting the ipod with windows! in the end of it windows says that it was not able to format the drive properly. then I click ok, open itunes, restore the ipod, try to sync again and have the problem that after a while the whole thing freezes... no more errors....just from the moment i disconnect the ipod manually from the cable, everything gets back to normal life again! I do not know what to do! do you guys think, my computer is too old or maybe my ipod's broke???
I'm despairing people...never had problems like that until itunes7! I tried as well to close all the other working programs with the task manager... doesn't change it!
Thx for the help!
Christopher
IBM, Pentium3, FW(desire to fire?)...doesn't really matter Windows XP

Problem with Notifications on Create User/ Change User Password

Hello,
I'm having a problem sending emails to users when an account is created in OIM.
I added a notification to the user and user's manager on the Create User task in the Xellerate User process definition but the emails are not being sent.
I know that if I create another task with the purpose of sending emails and invoke it through the response in the Create User task, it will work.
My aim is to avoid adding tasks for something OIM should be able to do OOTB.
I'm also unable to send an email when a password is updated.. I did the same thing as for the Create User and I know the task (Change User Password) is being invoked by looking at the logs but the emails aren't being sent.
Has anyone ran into such problems?
I'm having these problems in the Xellerate User process task.. i've added notifications in other process tasks (mainly approval tasks) and they are working fine.
Thanks in advance

Hi,
I am just confuse with your response.Have you added the "Password Updated" task in xellerate user provisioning process?
Now if you changing password in OIM profile it will trigger "Change User Password" task not the "Password Updated" task and even if you add "Password Updated" task on Xellerate User provisioning task you can't see this task in Resource Details.
Now assume if you added your notification on "Password Updated" task of any resource which user is provisioned to even then when you change oim password it only trigger "Change User Password" task.So try to have your notification on "Change User Password" task.
Please clarify so that I can response correctly.
Regards
Nitesh

Problem with replacement of index series, change of base year

Hi Experts!
I try to explain my problem in Real Estate.
In Italy from January 2011 the baseline (base year) national index of consumer prices for the entire community (NIC) and national consumer price index for families of workers and employees (CPI) moved from 1995 to 2010.
So, I have to change the base year of index in Rent Adjustment.
I think I have changed the base year from 1995 to 2010.
(Path: Real Estate>Rent Adjustment>Index>Replacement of index series, change of base year)
In table TIVAJINDXCON (previous was empty) now there is this record:
SERIESTO: 08000
BASEYEARTO: 1995
SERIESFROM: 08000
BASEYEARFROM: 2010
CHAINDATE: 31.12.2010
INDEXBASETO: 1,373
But with transaction FOA0 it seems that the rent adjustment still consider 1995 as base year instead of 2010.
I have to set the SAP application as to use 2010 as new base year instead of 1995.
Would you please forward me with any support.
Best regards,
Thank you.
Tania

My question has been answered by SAP.

Problem with Restricted Recruiter Requisition Status Change Approval Proces

Similar Messages

Maybe you are looking for