Problem with automated height/width after applying effect

Hey guys,
I have a panel that automatically resizes after some other contents is being added. All the time there is a scale-effect. Whenever I move the mouse over any of those children they zoom in and there the height & width of the parent container automatically resizes.
However I have a minimize button for that one along with a resize effect. I can resize the complete container to a minimize size (e.g. 40x40), but when I resize back with the same effect, the panel does not automatically resizes with added children anymore.
I did not set any special properties on the panel from the beginning, but some property must be different now. It is not "autoLayout" and also the "percentageWidth/Height" does not work properly as that command will cause the panel to stretch over the complete stage. Any suggestions here?

Mmmh...that does not seem to solve the issue for me. Even when setting the width and height to NaN before the effect is played, it will still lead to a fixed height and width of the parent panel container. When I add new children the parent container is not properly resized, means that the chiildren just go beyond the parent container's border.
Setting these parameters after the effect is done leads to the following crash: ArgumentError: Error #2004: One of the parameters is invalid.
at flash.display::Graphics/drawRect()
at spark.accessibility::PanelAccImpl/eventHandler()[E:\dev\4.0.0\frameworks\projects\spark\s rc\spark\accessibility\PanelAccImpl.as:361]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.core::UIComponent/dispatchEvent()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\co re\UIComponent.as:12266]
at mx.core::UIComponent/dispatchResizeEvent()[E:\dev\4.0.0\frameworks\projects\framework\src \mx\core\UIComponent.as:9641]
at mx.core::UIComponent/commitProperties()[E:\dev\4.0.0\frameworks\projects\framework\src\mx \core\UIComponent.as:7866]
at spark.components.supportClasses::SkinnableComponent/commitProperties()[E:\dev\4.0.0\frame works\projects\spark\src\spark\components\supportClasses\SkinnableComponent.as:414]
at mx.core::UIComponent/validateProperties()[E:\dev\4.0.0\frameworks\projects\framework\src\ mx\core\UIComponent.as:7772]
at mx.managers::LayoutManager/validateProperties()[E:\dev\4.0.0\frameworks\projects\framewor k\src\mx\managers\LayoutManager.as:572]
at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.0.0\frameworks\projects\frame work\src\mx\managers\LayoutManager.as:730]
at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.0.0\frameworks\projec ts\framework\src\mx\managers\LayoutManager.as:1072]
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
Here is my code...anything wrong here.
private function recreateWindow(e:MouseEvent)//thrown once the user moves his mouse over the minimized panel
     myResizeEffect.heightFrom = 40;
     myResizeEffect.heightFrom = 40;
     myResizeEffect.heightFrom = lastHeight;
     myResizeEffect.heightFrom = lastWidth;
     myResizeEffect.play();
     myResizeEffect.addEventListener(EffectEvent.EFFECT_END,resetMinimizeValues);
private function resetMinimizeValues(event:EffectEvent):void
     myResizeEffect.removeEventListener(EffectEvent.EFFECT_END,resetMinimizeValues);
     //adding the old listeners before the panel was minimized
     this.width = NaN;//crash
     this.height = NaN;//crash
Any suggestions?
...and how can I remove the "Question answered"-tag...?

Similar Messages

  • Problem with Apache reverse proxy after applying SP13 NW

    Hello,
    we have a NW04 EP Portal and a Apache reverse proxy in the DMZ. After applying SP 13 for the portal we get the following error from the reverse proxy:
    Proxy Error
    The proxy server received an invalid response from an upstream server.
    The proxy server could not handle the request GET /irj/.
    Reason: Error reading from remote server
    Apache/2.0.52 (Win32) mod_ssl/2.0.52 OpenSSL/0.9.7e Server at servername.company.de Port 443
    Is is it possible, that there is a problem with sp13?
    Best regards
    Daniel Holstein

    Hi Daniel,
    ok I`ll try to find a solution in parallel and keep you up to date.
    In the following my settings in case I missed something:
    <VirtualHost test.firma.de:443>
    SSLEngine on
    SSLProxyEngine on
    SSLCertificateFile /apache/keys/pac_ssl_qep_dmz_server.crt
    SSLCertificateKeyFile /apache/keys/pac_ssl_qep_dmz_server.key
    ServerName test.firma.de:443
    ServerAdmin [email protected]
    LogLevel debug
    ErrorLog logs/ssl_443_error
    CustomLog logs/ssl_443_access_log common
    ProxyVia Off
    ProxyPreserveHost On
    ReWriteEngine on
    ReWriteLogLevel 0
    ReWriteLog logs//ssl_443_rewrite_http.log
    ProxyPass / https://backend.firma.de:50001/
    ProxyPassReverse / https://backend.firma.de:50001/
    </VirtualHost>
    Regards, Jens

  • Problems with EM Database Control after applying 10.2.0.4 patchset

    Hello all,
    Host: Linux x86
    DB: Single-instance running EM Database Control. Originally 10.2.0.1 patched to 10.2.0.4
    Last night I upgraded the database from 10.2.0.1 to 10.2.0.4. All appeared to go well. I didn't get any errors in the process and when I logged in to the database control, all appeared well. It was late at night so I didn't browse around for very long, though. When I came in this morning and did some more extensive testing, upon logging in I first noticed that in the General section the database version was listed as 10.2.0.1.0. I thought that this was pretty odd since I had just been logged on to SQL*Plus and saw that the database was reporting back that it was at version 10.2.0.4.0. I refreshed the page and I saw
    "java.lang.Exception: IOException in reading Response :: Connection reset"
    at the top of the page. I have seen this problem before and, in the past, it has been resolved by either restarting the dbconsole or making sure that the monitoring configuration is set up correctly. The first thing that I did was issue
    [host]$ emctl stop dbconsole followed by
    [host]$ emctl start dbconsole
    to see if that would do the trick. When I saw that it didn't, I went into the Monitoring Configuration and was surprised to see that it said "No items were found." I refreshed the page and this error appeared:
    oracle.sysman.emSDK.emd.comm.CommException: IOException in reading Response :: Connection reset
    I tried to follow all of the instructions in the ReadMe as closely as I could. I have been searching on the Internet and the Oracle Forums for most of the day to try to find out the cause of this error. I see that people have these errors, but the circumstances are not the same as mine. Is this a common problem? Does anyone know what I can do to resolve it?
    Any help would be greatly appreciated.
    Thanks!
    John

    Hello Satish,
    Thank you for your reply. I don't know if this is normal or not but, now after the upgrade, in the ORACLE_HOME I have a directory that's been created called hostnameSID (the fully qualified host name of my computer and the SID of the database).  Inside of it is a sysman directory, an emctl.pid file and an oraInst.loc file.  I also still have a syman directory under the ORACLEHOME but the dbconsole appears to be running out of the hostname_SID directory.  Is that normal?
    I looked up the article that you referenced and looked for the targets.xml file first in the ORACLE_HOME/sysman/emd directory. I found a targets.xml file along with several other similar files, targets.xml.1, targets.xml.2, etc. The targets.xml file just had the following:
    <Targets>
    </Targets>
    Seeing that it was blank, I then took a look at the the hostname_SID/sysman/emd folder. I saw only one targets.xml file in this location and when I opened it up it had the following:
    <Targets AGENT_TOKEN="+alpha numeric string+">
    <Target TYPE="oracle_emd" NAME="+hostname+:3938"/>
    <Target TYPE="host" NAME="+hostname+"/>
    </Targets>
    The contents of that file seemed to match what the article which you cited indicated should be in the file. Since I have a single instance managed by the dbconsole and not EM Grind Control, I'm expecting the files to be a little bit different. Am I wrong in assuming that? Still, I'm not sure if I should have the hostname_SID directory beneath the ORACLE_HOME.
    Any ideas?
    Thanks again for your help,
    John

  • Solutions for problems with QuickTime files in After Effects CC (12.0)

    We have a new blog post up about solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOut QuickTime components. 
    Please read that post and let us know here on this forum thread if you have any questions or comments. 
    Also, please let us know if the proposed solution works for you.

    Mark - The new document that we published is meant to address a specific issue. You can confirm you have the issue by the following:
    Adobe QT32 Server is not running when you receive these errors. Keep Activity Monitor open to track whether or not it is running.
    The crash log for QT32 Server indicate CoreAudio as the last component called. You can find the crash logs in Users/username/Library/Logs/DiagnosticReports. The report will look like this:
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   ???                                     0x04981f90 0 + 77078416
    1   com.apple.audio.CoreAudio               0x949d05c1 __Call_block_invoke_03 + 56
    2   libdispatch.dylib                       0x94a90f8f _dispatch_call_block_and_release + 15
    If this is not the issue you're having, please start a new thread and provide the usual data. If your problem does match this issue, please double-check that you've followed the steps in the new document and post back here.

  • Hallo, i have a problem with the intallation about after effects. I have a mac 10.6.8 and they told me I can't installete it because i don't have a system with 64 bit. how can i do? someone told me i can .. but i don't know how. thank you

    hallo, i have a problem with the intallation about after effects. I have a mac 10.6.8 and they told me I can't installete it because i don't have a system with 64 bit. how can i do? someone told me i can .. but i don't know how. thank you

    You cannot.  If someone else told you there is a way then they will need to show you.  After Effects requires a 64-bit system and the latest release requires Mac OS X v10.8 or v10.9 minimum

  • ECR/ECO problem with automated transactions

    Hi Friends,
    I have problem with automated close of ECR.
    Description:
    I have change number with one object - Inspection Plan.
    In CC32 when "Incorrect Change" is set and I click "Erro Corrected" - nothink happen
    (it should show popup with information that transaction cc06 was automated started)
    After that when i choose "Release Change" - also nothing happen.
    (it should shop popup and set status - "Close ECO")
    Everything works ok on sandbox system but on Dev/Test/Prod it doesn't work.
    Anybody now where could be a problem?
    Thank you for any advice.

    Hi
    Pls check this Link
    SAP-ECM and PPPI Integration-Solution
    Thanks in advance

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • Problem with Rescue and Recovery after installing Norton Internet Security 2010

    Hi all.
    It's my first time in this forum.
    I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
    The message I get it:
    "Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
    I tried to close the Norton but I couldn't find how.
    Tanks
    Doron71

    Hi and welcome to the forum,
    the reason for this situation is, that the antivir files are protected from being modified.
    This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
    So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
    This will skip the backup of this file and will fix your situation.
    Please let me know, if you have covered this.
    Cheers

  • Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Hi Hanjon!
    Here is an article that will help you troubleshoot these purchased apps:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Problem with flash on IE11 after using adobe cleaner

    Problem with flash on IE11 after using adobe cleaner to remove a trial version of photoshop because there was not any entry on add/remove applications in windows 8.1
    Its to frustrating to reinstall everything. I tried everything from your support page with no luck…

    Link for Download & Install & Setup & Activation problems may help
    -Online Chat http://www.adobe.com/support/download-install/supportinfo/

  • I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. Starting on a new computer now. I can get my music from old computer?

    I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?

    WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
    Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

  • Problems with your HP printer after upgrading to Windows 8.1

    If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
    www.hp.com/go/tools.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

    Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions  work just fine.
          I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

  • Strange problem with my ipod 2g after upgrade to os 4.2

    Strange problem with my ipod 2g after upgrade to os 4.2
    the problem with volume some times when i switch on the ipod i hear the sound
    alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
    i hope i get help

    I would try in order:
    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backu via iTunes.
    - Restore the iPod to factory defaults/new iPod.

  • I have a problem with a chart refreshing after its bound data provider changes.

    I have a problem with a chart refreshing after its bound data
    provider changes. After the subsetHighLowData.refresh() is called I
    would expect the chart to redraw, but it still looks the same. I
    even inspected the debugger to see if the slice had taken place and
    it had.
    Any ideas coding friends?

    "nikos101" <[email protected]> wrote in
    message
    news:gib6aa$prr$[email protected]..
    >I have a problem with a chart refreshing after its bound
    data provider
    >changes.
    > After the subsetHighLowData.refresh() is called I would
    expect the chart
    > to
    > redraw, but it still looks the same. I even inspected
    the debugger to see
    > if
    > the slice had taken place and it had.
    >
    > Any ideas coding friends?
    >
    > subsetHighLowData.source =
    >
    highLowData.source.slice(slider.values[0],slider.values[1]);
    Just use the ArrayCollection's removeItemAt, and it should
    handle the event
    dispatching for you.
    HTH;
    Amy

  • I have problem with wireless print HP after iOS 7  !? What can i do

    I have problem with wireless print HP after iOS 7  !? What can i do?!  

    Tap Settings / General / Reset / Reset Network Settings if your having a problem with your network. If you have another problem go to the same place in "Reset" and just reset all settings

Maybe you are looking for

  • Syching Photos

    I just got my iTouch. I tried adding some photos to the device but I get the error message "The iPod can not be synched. The disk could not be read from or written to" HELP! What am I doing wrong? I have been adding music and videos without issues. I

  • OAS 4.0.8.1 Administration from a remote location

    We have installed OAS 4.0.8.1 on NT and it is functioning. I am able to access this from a remote place and get a static web page. I don't have a registered domain name Can I go into Node manager (OAS Manager) from a remote location (through Internet

  • SXPG_COMMAND_EXECUTE - transfer files to FTP

    Our OS is Windows NT. I am using SXPG_COMMAND_EXECUTE to execute a script to transfer files from R/3 App Server to FTP Server.  I created a command in SM69. command name: ZZ_MOVE Operating system: Windows NT Type: Customer Operating system command: c

  • What role/roles require to administer OEM DB control jobs?

    Hi all, I've DBA role, but I can't look at the job tab on the OEM db control console. I was wondering which other role or roles I need to administer job on db console? Could you please help understand on this?

  • Wireless module not supported

    I have a DV6Z-6C00 CTO laptop notbook and I recently had to install a new wireless card but I keep getting a Wireless module not supported error. I checked with the manual and I ordered a Intel Centrino-N 1000 WLAN Module (593530-001 replacement #) a