Problem with Axis Adapter endpoint url in WSDL file.

Dear experts,
We are using PI 7.1 ehp1 with a SOAP to RFC scenarios using the Axis adapter.
We have the XIAxisAdapter as sender Communication Channel and the related Sender Agreement.
When i am looking into the WSDL file of the Sender Agreement than the endpoint contains ...location="host:port/ XISOAPAdapter /MessageServlet"... in stead of ...location="host:port/ XIAxisAdapter /MessageServlet"...
The url with "XISOAPAdapter " will not work. When i export the WSDL file and manually adjust the location to "XIAxisAdapter " everything works fine.
Is it possible to directly generate a correct WSDL with calling the url http://host:50000/dir/wsdl?p=xxxx?
Thanks in advance!
Best regards,
Joost Weghorst

Hi Sonya,
You can use configuration plan while deploying composite.
The configuration plan enables you to define the URL and property values to use in different environments. During process deployment, the configuration plan is used to search the SOA project for values that must be replaced to adapt the project to the next target environment.
Please refer this doc. for getting introduced to config plan.
http://docs.oracle.com/cd/E29542_01/dev.1111/e10224/sca_lifecycle.htm#SOASE10908
To deploy soa composite with config plan refer this doc:
http://docs.oracle.com/cd/E29542_01/dev.1111/e10224/sca_lifecycle.htm#SOASE85469

Similar Messages

Problem with FTP Adapter in creating a new Folder

Hi all,
I have a requirement in which a BPEL process shud create a folder named as sysdate dynamically and write a
CSV file into that.(ex: PO/2010-03-09/PO_1.csv).I created a header variable for Oubound FTP adapter and
passing the file directory as concat('PO/',xp20:current-date(),'/') to outbound header directory variable.Problem is FTP
adapter is not creating the sysdate folder its says:1.check u have privileges 2.file name is too long....Blah....Blah.
But i have all the privileges for that user.If i manually create the sysdate folder the FTP adapter is placing the CSV
file.The same works fine with file adapter...but i need to use FTP since the FTP server can change in future.Seems to
be a problem with FTP adapter....can some one help.
Iam using SOA 10.1.3.4
Regards,
Edited by: 0racler on Mar 9, 2010 4:46 AM
Edited by: 0racler on Mar 9, 2010 5:49 AM

any thoughts????

Problem with Lightning Adapter after update to IOS 8.1

Dear all,
last week I updated the Iphone 5S of my wife with IOS 8.1 since that time we can not connect the B&W Bowl via lighning adapter (Original Apple).
Before never any problem. I have the new Iphone 6 but IOS 8.02 and no any problem with same adapter to connect the B&W Bowl.
I also checked in my car same problem with IOS 8.1 we can not connect but with 8.02 no problem.
I contacted the Apple support and it looks it´s a problem with the new IOS 8.1.
Does anybody have the same problems with the connection to Docking Stations etc ?
best regards
Jens

measure the speed with speedtest http://www.speedtest.net
and maybe contact your carrier

Problems with axis example

Hi
I'm trying to run the example TestClient.java that comes with axis, but I get:
java.net.ConnectException: Connection refused
Does anyone know if this server is still running and on the same port (5049) or if there's just something wrong with me.
Thanks
hardkxre

Originally posted by: vladimir.bogus.com
Hey Vladimir,
Import org.eclipse.tomcat as a project into your workspace and see how it's
done in org.eclipse.tomcat.internal.TomcatAppServer - same idea as in onJava
example and obviously working.
Vladimir
"Vladimir Kvassov" <[email protected]> wrote in message
news:ci5r6d$k3o$[email protected]..
> Thank you,
>
> but this is example, which I'v mentioned in my first message.
> (it doesn't work under eclipse)
>
> "Peter van de Hoef" <[email protected]> wrote in message
> news:ci4o25$3t9$[email protected]..
> > Hello Vladimir,
> >
> > Here's an article that describes how you can embed Tomcat in another
> > application:
> > http://www.onjava.com/pub/a/onjava/2002/04/03/tomcat.html
> > I expect that you can apply this in one of your own Eclipse plugins.
> > (I haven't tried this myself but hope it will work)
> >
> > Regards,
> > Peter van de Hoef
> >
> > "Vladimir Kvassov" <[email protected]> wrote in message
> > news:ci487b$1su$[email protected]..
> > > Hi
> > >
> > > Application, which we develop is based on Eclipse platform,
> > > and now we need to provide access throug web-services.
> > >
> > > Is it possible to start Tomcat in the same VM, as Eclipse?
> > > So, web services will be able to access classes from
> > > our application?
> > >
> > > Or maybe there is some better ideas?
> > >
> > > I found example of starting tomcat from java application,
> > > but from one side, I'v got problems with Axis, from another
> > > side, it seems, this this example doesn't work in Eclipse environment.
> > >
> > > I'v tryed to use eclipse tomcat wrapper, but I can't understand, how
> > > it works, and id I can use it at all.
> > >
> > > Thank you beforehand.
> > >
> > > --
> > > Best Regards
> > > Vladimir Kvassov
> > >
> > >
> >
> >
>
>

I have one problem with Data Guard. My archive log files are not applied.

I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!

Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap

I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer.

I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer. Is there a fix for this? Please let me know, I have been asking here for a few days here and no answers yet? Josh

I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer. Is there a fix for this? Please let me know, I have been asking here for a few days here and no answers yet? Josh

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

By doing a Google search.

Weird problem with Axis in JBoss accessing WSDL

Hi
for an application, Axis web services are used and everything is running inside JBoss 4.0.2. The WSDL file is dynamically generated by Axis and clients are set up to get this WSDL file from the Service before making a call.
Clients are making web service calls to the application and everything runs perfectly. However, after some time an error occurs which causes the WSDL file not being available any more. According to the error messages it looks like it can not find some classes, and looking at the Axis code (AxisServlet.java:226) this is where the PrintWriter is instantiated - which is not any special but usual Java class.
The only solution so far is to restart the JBoss, after which the WSDL is available again.
This behavior I can not understand - any help would be greatly appreciated.
Thanks
Michal
2006-08-30 07:18:21,648 WARN [WebappClassLoader,openJARs] Failed to open JAR
java.util.zip.ZipException: No such file or directory
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:204)
at java.util.jar.JarFile.<init>(JarFile.java:132)
at java.util.jar.JarFile.<init>(JarFile.java:97)
at org.apache.catalina.loader.WebappClassLoader.openJARs(WebappClassLoader.java:1544)
at org.apache.catalina.loader.WebappClassLoader.findResourceInternal(WebappClassLoader.java:1763)
at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1570)
at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:850)
at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1299)
at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1181)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at org.apache.axis.transport.http.AxisServlet.doGet(AxisServlet.java:226)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:697)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:39)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:153)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:407)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:59)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:744)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)
at java.lang.Thread.run(Thread.java:595)
2006-08-30 07:18:21,649 ERROR [[AxisServlet],invoke] Servlet.service() for servlet AxisServlet threw exception
java.lang.NullPointerException
at org.apache.catalina.loader.WebappClassLoader.findResourceInternal(WebappClassLoader.java:1766)
at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1570)
at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:850)
at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1299)
at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1181)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at org.apache.axis.transport.http.AxisServlet.doGet(AxisServlet.java:226)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:697)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:39)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:153)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:407)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:59)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:744)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)
at java.lang.Thread.run(Thread.java:595)

The problem was I had to write in my wsdd file:
<service name="PurchaseService"
provider="java:RPC"
style="document"
use="literal">
Thanks

Problem with Watched Folder endpoint

Hi,
We have a problem with a watched folder endpoint. The watched folder is set in a directory in a linux server. The directory then is mapped to a windows directory where files arrive from time to time. Everything works fine until the watched folder service stops for no particular reason. After that we need to restart the service from the admin UI console.
I found in another post something related to the MySql database losing connection with livecycle after some inactivity, but I'm not sure if this is our case or even how to solve the problem.
Here's what we found in the log
2010-11-11 17:10:31,890 INFO [com.adobe.idp.dsc.provider.service.file.write.impl.FileResultHandlerImpl] FileResultHandlerImpl ----- preserved- source ----/data/livecycle/lc_wrk/edi/stage/Wx130df02e731a9c7b14738905/C0158_208.dat--- to ---/data/livecycle/lc_wrk/edi/preserve/ /C0158_208.dat
2010-11-11 20:39:46,366 INFO [com.adobe.idp.scheduler.jobstore.DSCJobStoreTX] Handling 1 trigger(s) that missed their scheduled fire-time.
2010-11-11 20:40:22,056 ERROR [com.adobe.idp.scheduler.jobstore.DSCJobStoreTX] Error retrieving job, setting trigger state to ERROR.
org.quartz.JobPersistenceException: Couldn't retrieve job: Prepared statement needs to be re-prepared [See nested exception: java.sql.SQLException: Prepared statement needs to be re-prepared]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveJob(JobStoreSupport.java:1338)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.triggerFired(JobStoreSupport.java:2789)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$37.execute(JobStoreSupport.java:2757)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.executeInNonManagedTXLock(JobStoreSupport.ja va:3662)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.triggerFired(JobStoreSupport.java:2751)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:313)
Caused by: java.sql.SQLException: Prepared statement needs to be re-prepared
at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:2928)
at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1571)
at com.mysql.jdbc.ServerPreparedStatement.serverExecute(ServerPreparedStatement.java:1124)
at com.mysql.jdbc.ServerPreparedStatement.executeInternal(ServerPreparedStatement.java:676)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1030)
at org.jboss.resource.adapter.jdbc.CachedPreparedStatement.executeQuery(CachedPreparedStatem ent.java:90)
at org.jboss.resource.adapter.jdbc.WrappedPreparedStatement.executeQuery(WrappedPreparedStat ement.java:255)
at org.quartz.impl.jdbcjobstore.StdJDBCDelegate.selectJobListeners(StdJDBCDelegate.java:843)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveJob(JobStoreSupport.java:1319)
... 5 more
2010-11-11 20:40:22,061 ERROR [org.quartz.core.ErrorLogger] An error occured while firing trigger 'WatchedFolder.WatchedFolder:1107'
org.quartz.JobPersistenceException: Couldn't retrieve job: Prepared statement needs to be re-prepared [See nested exception: java.sql.SQLException: Prepared statement needs to be re-prepared]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveJob(JobStoreSupport.java:1338)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.triggerFired(JobStoreSupport.java:2789)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$37.execute(JobStoreSupport.java:2757)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.executeInNonManagedTXLock(JobStoreSupport.ja va:3662)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.triggerFired(JobStoreSupport.java:2751)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:313)
Caused by: java.sql.SQLException: Prepared statement needs to be re-prepared
at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:2928)
at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1571)
at com.mysql.jdbc.ServerPreparedStatement.serverExecute(ServerPreparedStatement.java:1124)
at com.mysql.jdbc.ServerPreparedStatement.executeInternal(ServerPreparedStatement.java:676)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1030)
at org.jboss.resource.adapter.jdbc.CachedPreparedStatement.executeQuery(CachedPreparedStatem ent.java:90)
at org.jboss.resource.adapter.jdbc.WrappedPreparedStatement.executeQuery(WrappedPreparedStat ement.java:255)
at org.quartz.impl.jdbcjobstore.StdJDBCDelegate.selectJobListeners(StdJDBCDelegate.java:843)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveJob(JobStoreSupport.java:1319)
... 5 more
2010-11-11 20:56:46,550 INFO [com.adobe.idp.scheduler.jobstore.DSCJobStoreTX] Handling 1 trigger(s) that missed their scheduled fire-time.
thanks

Originally Posted by bjbradleyUSC
Is there a problem with running the ZCM client and the Endpoint client on the same machine?? I am having problems getting both of them to install on a single machine.
If I install the ZCM Client, it will pull down the policies and work correctly. Then I try to install Endpoint and it will not finish up it's checkin procedure and it will not get the policies set in place for it.
Otherwise, I'll start with Endpoint on a fresh machine install it and it works great pulling down the policies. But the ZCM doesn't seem to pull down the policies correctly?
Just wondering if this was known problem or is there something I am not doing correctly...
Thanks
BJ Bradley
This is issue that you are seeing is just for the client, correct? The ZESM server and ZCM server are on separate machines, correct?

Problems with SOAP Adapter/Interface

Hi Experts,
we currently try and experiment with XI 3.0 Stack 09 and the SOAP adapter respectively.
We started with a simple interface (foo..., see wsdl attachment) that we want to provide by XI.
All configurations (SLD, Integration Repository, Integration Directory) should have been done accordingly as we suppose, similar to other szenarios we have already implemented.
When we send a SOAP request based on a generated wsdl to XI we get the exception at the bottom of this text, containing e.g.
com.sap.aii.messaging.srt.BubbleException: error during conversion [null "null"];
com.sap.aii.messaging.util.XMLScanException: Parsing an empty source. Root element expected!
For sending the SOAP message we used XMLSpy.
Did someone have similar problems or can give us an working WSDL example, or some hint?
Thanks in advance,
Klaus Lukas
foo.wsdl
<?xml version="1.0" encoding="ISO-8859-1"?>
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:p1="urn://poreceive.xi.pse.siemens.com" targetNamespace="urn://poreceive.xi.pse.siemens.com" name="foo_out_sync">
 <wsdl:types>
 <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn://poreceive.xi.pse.siemens.com" targetNamespace="urn://poreceive.xi.pse.siemens.com">
 <xsd:element name="foo" type="foo_DT"/>
 <xsd:complexType name="foo_DT">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 fe0bb241d2a011d9cd15e9729ee2f568
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:sequence>
 <xsd:element name="item" type="xsd:string">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 fe0bb240d2a011d9acede9729ee2f568
 </xsd:appinfo>
 </xsd:annotation>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
 </xsd:schema>
 </wsdl:types>
 <wsdl:message name="foo">
 <wsdl:part name="foo" element="p1:foo"/>
 </wsdl:message>
 <wsdl:portType name="foo_out_sync">
 <wsdl:operation name="foo_out_sync">
 <wsdl:input message="p1:foo"/>
 <wsdl:output message="p1:foo"/>
 </wsdl:operation>
 </wsdl:portType>
 <wsdl:binding name="foo_out_syncBinding" type="p1:foo_out_sync">
 <soap:binding xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
 <wsdl:operation name="foo_out_sync">
 <wsdl:input>
 <soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal"/>
 </wsdl:input>
 <wsdl:output>
 <soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal"/>
 </wsdl:output>
 </wsdl:operation>
 </wsdl:binding>
 <wsdl:service name="foo_out_syncService">
 <wsdl:port name="foo_out_syncPort" binding="p1:foo_out_syncBinding">
 <soap:address location="http://xxxxxxxx:8000/XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out&version=3.0&Sender.Service=Foo_SOAP_Service&Interface=urn%3A%2F%2Fporeceive.xi.pse.siemens.com%5Efoo_out_sync" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"/>
 </wsdl:port>
 </wsdl:service>
</wsdl:definitions>
soap message incl. error
<?xml version="1.0"?>

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>error during
conversion</faultstring>
<detail>
<s:SystemError
xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>XMLScanException</code>
<text><![CDATA[
com.sap.aii.af.mp.module.ModuleException
at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process
(XISOAPAdapterBean.java:697)
at
com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl3.process
(ModuleLocalLocalObjectImpl3.java:103)
at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process
(ModuleProcessorBean.java:221)
at
com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process
(ModuleProcessorLocalLocalObjectImpl0.java:103)
at com.sap.aii.af.mp.soap.web.MessageServlet.doPost
(MessageServlet.java:543)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:853)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
(HttpHandlerImpl.java:385)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleReques
t(HttpHandlerImpl.java:263)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:340)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:318)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebConta
iner(RequestAnalizer.java:821)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.handle
(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle
(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request
(Processor.java:147)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessio
nMessageListener.process(ApplicationSessionMessageListener.java:37)
at
com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner
.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:162)
Caused by: com.sap.aii.messaging.srt.BubbleException: error during
conversion [null "null"]; nested exception caused by:
com.sap.aii.messaging.util.XMLScanException: Parsing an empty source.
Root element expected!
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.onResponseToWS
(XMBWebServiceExtension.java:936)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.invokeOnResponse
(XMBWebServiceExtension.java:602)
at com.sap.aii.messaging.srt.ExtensionBubble.onMessage
(ExtensionBubble.java:58)
at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process
(XISOAPAdapterBean.java:576)
... 20 more
Caused by: com.sap.aii.messaging.util.XMLScanException: Parsing an
empty source. Root element expected!
at com.sap.aii.messaging.util.StreamXMLScannerImpl.open
(StreamXMLScannerImpl.java:104)
at com.sap.aii.messaging.mo.DefaultItem.setData
(DefaultItem.java:294)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.makeItemFromPayload
(XMBWebServiceExtension.java:972)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.onResponseToWS
(XMBWebServiceExtension.java:879)
... 23 more
]]></text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>

Hi Klaus
In your wsdl file the soap address tag (given below)
<soap:address location="http://xxxxxxxx:8000/XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out&version=3.0&Sender.Service=Foo_SOAP_Service&Interface=urn%3A%2F%2Fporeceive.xi.pse.siemens.com%5Efoo_out_sync" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"/>
is to be edited as
<soap:address location="http://xxxxxxxx:50000//XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out" />
because the soap address format should be like :
http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
For more information :
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
Hope this will be helpful.
Regards
Suraj

JMS protocol with AXIS Adapter

Hi,
I need to configure the sender AXIS adapter to access SonicMQ JMS queues via Open LDAP. I looked at the AXIS Adapter documentation and no examples are provided to access SonicMQ via OpenLdap.
I do see the documentation to access the JMS providers directly by specifying the URL as "jms://ABCD"
but what i am looking for is to access the JMS objects via LDAP. The standard SAP JMS Adapter has the functionality to access JMS via LDAP. but i need to use AXIS adapter for WS-Security
Any help is greatly appreciated
Thanks
Chandra

Hi Chandra,
As far as I know, this is not directly supported via SOAP Axis Adapter. But one question which I would like to ask is are you trying to configure WS Security using Axis Handlers or you are trying to use the WS Security provided by SAP PI i.e. configuring Security Profile in the Sender Channel?
If you are trying to do it with Axis Handlers may be you can try using the Adapter modules specified in this link which can be used tto call Axis Handlers. <http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm>. Although documentation says that this is supported for SOAP adapter but you can still try as the message returned is still a valid AF message.
Best Regards,
Pratik

Encoding problem with Application adapter for OEBS

Hello All!
We going to pass value via app adapter from EBS Forms to Content Server page. Link to documentation Configuring the Managed Attachments Solution - 11g Release 1 (11.1.1)
We have done all setting, and this function is working now .
It is good working with English letters and numbers, but when we try to use Cyrillic we have a problem with Encoding in Content server page.
Data on Oebs table use ''CL8ISO8859P5'', but service xml for adapter has allays a title with charset=utf-8
System are:
OEBS 12.1.3
Webcenter Content 11.1.1.6
Adapter 11.1.1.6 + patch 16463891
Could you help us?

Hi Denis ,
Try this solution :
1) Log on to the APPS EBS schema and re-create the AXF_SOAPCall function using the following SQL:
create or replace
function AXF_SOAPCall (url varchar2, soapmsg varchar2, secure varchar2, walletid varchar2, walletpass varchar2) return varchar2 as
http_req utl_http.req;
http_resp utl_http.resp;
response_env varchar2(32767);
v_newcharset VARCHAR2(40 BYTE) :='UTF8';
v_Dbcharset VARCHAR2(40 BYTE);
v_Raw1 RAW(32767);
v_Stmt1 VARCHAR2(6000 BYTE);
begin
v_newcharset := 'AMERICAN_AMERICA.'|| v_newcharset ;
v_Dbcharset := 'AMERICAN_AMERICA.'||utl_i18n.map_charset(fnd_profile.value('ICX_CLIENT_IANA_ENCODING'),0,1);
v_Raw1 := UTL_RAW.CAST_TO_RAW (soapmsg);
v_Raw1 := UTL_RAW.CONVERT (v_Raw1,v_newcharset,v_Dbcharset);
if ( secure = 'true' or secure = 'TRUE' ) then
utl_http.set_wallet (walletid, walletpass);
end if;
http_req := utl_http.begin_request(url , 'POST', utl_http.HTTP_VERSION_1_1);
utl_http.set_header(http_req, 'Content-Type', 'text/xml; charset=utf-8');
utl_http.set_header(http_req, 'Content-Length', utl_raw.length(v_Raw1));
utl_http.write_raw(http_req, v_Raw1);
http_resp := utl_http.get_response(http_req);
utl_http.read_text(http_resp, response_env);
dbms_output.put_line('Response: ');
dbms_output.put_line(response_env);
utl_http.end_response(http_resp);
return response_env;
end;
2) Log on to the EBS and confirm that you can now open the Managed Attachments window for all records & forms, regardless of the use (& length) of multibyte string values.
This was caused by multibyte characters used with non UTF-8 language strings .
I presumed that you are seeing that when "Managed Attachments" option through the ZOOM button from an E-Business Suite (EBS) forms, nothing happens.If you have a support id then check the following note : 1409703.1 from MyOracleSupport portal.
Hope this helps.
Thanks,
Srinath

Problem with Sender Adapter File Content Conversion

Hi all!
I have a question about file content conversion in sender file adapter.
I have file like:
{field1
field2
field3
field4
$
{field5
field6
field7
field8
And i need to get file like:
<dealings>
<deal>
<field1>{field1</field1>
<field2>field2</field2>
<field3>field3</field3>
<field4>field4</field4>
<field5>-}*</field5>
</deal>
<deal>
<field1>{field5</field1>
<field2>field6</field2>
<field3>field7</field3>
<field4>field8</field4>
<field5>-}*</field5>
</deal>
</dealings>
I put content conversion parameters:
deal.fieldSeparator = $
deal.fieldNames = field1,field2,field3,field4,field5
And i get a file like:
<ns:mt_swift_file>
<dealings>
<deal>
<field1>{field1</field1>
</deal>
<deal>
<field1>field2</field1>
</deal>
<deal>
<field1>field3</field1>
</deal>
<deal>
<field1>field4</field1>
</deal>
<deal>
<field1>-}*</field1>
</deal>
<deal>
<field1/>
</deal>
<deal>
<field1>{field5</field1>
</deal>
<deal>
<field1>field6</field1>
</deal>
<deal>
<field1>field7</field1>
</deal>
<deal>
<field1>field8</field1>
</deal>
<deal>
<field1>-}*</field1>
</deal>
</dealings>
</ns:mt_swift_file>
What i do wrong?
As i understand, XI put string to a separate tag after symbol 'nl', but how can i get structure without unnecessary tags?

Hi,
Check some links for FCC
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani

Problem with Web Services Navigator - Cannot download WSDL

HI!
I'm having problem testing webservices.
After created and manteined the web services, when I try to TEST from WSADMIN -->Webservice HomePage
I'm redirected to a page where there is:
Cannot download WSDL from http://myhost.full.qualified:8000/sap/bc/srt/rfc/sap/ZZMHRJ00001?sap-client=010&wsdl=1.1: Cannot connect to http://myhost.full.qualified:8000/sap/bc/srt/rfc/sap/ZZMHRJ00001?sap-client=010&wsdl=1.1: myhost.full.qualified
Then If I click on the link:
http://myhost.full.qualified:8000/sap/bc/srt/rfc/sap/ZZMHRJ00001?sap-client=010&wsdl=1.1
A pop up appead that ask me a user and pswd for the Web AS
I have 2 different behaviour If I use J2EE_ADMIN or other user.
With J2EE_ADMIN I receive this error:
Your request could not be processed
SRT: ASSERT failed: object reference not bound
What has happened?
A Soap Core Exception was raised in Method CL_SOAP_REGISTRY::generate_wsdl(6)
Technical Details of Soap Core Exception
Message Text: SRT: ASSERT failed: object reference not bound
Class: CL_SOAP_REGISTRY
Method: generate_wsdl
LocationID: 6
Program: CL_SOAP_REGISTRY==============CP
Include: CL_SOAP_REGISTRY==============CM00J
Line: 59
What can I do?
Contact your system administrator and show him the technical details above.
If I use another user I'm redirected to a XML page.
Is this because some authorization issue of the user I put on popup (Web AS user)?
Regards

Hi,
Copy that WSDL file on Local PC then Upload in SAp using Local Host Option.
It will Work..
Salil....

Satellite A200 - Problems with AC adapter

Hi,
The problem concerns an Satellite A200 (PSAF6A-02H01N).
Recently there has been problems with the Laptop taking several attempts to start up Vista, it would lock up while loading or just crash and freeze just after loading Vista.
But Once it was up and running the laptop would happily work for hours with the AC adapter plugged in.
The problem has now got worse and the laptop will not finish loading Vista without crashing.
We have now narrowed the it down to only having a problem when the AC power adapter is plugged in.
The Laptop battery will charge normally with the AC adapter plugged in and the Laptop in standby or switched off.
The problem still exists with the AC adapter plugged in and the battery removed.
The notebook will start up and run perfectly with the battery in and no AC adapter connected. Once the AC adapter is plugged in the Laptop will show that the battery is charging then after a few seconds it will crash or freeze and the only escape is a complete shutdown.
The laptop will only run under battery power for about 30mins max.
I have checked the Voltage output of the AC adapter and this appears to be a consistant 19.4 Volts.
Is it just an AC adapter problem or does the problem lie with the laptop?
Thanks in advance..
Gaz.

Crashing/BSOD's can be caused by many things. The first thing to do is check the RAM and HDD for problems.
Test the RAM for errors. You can use the free Memtest utility:
1) Go to http://www.memtest.org/#downiso and download the "Pre-Compiled Bootable ISO (.zip)"
2) Open the ZIP file and extract the ISO file to a temporary folder.
3) Burn the ISO to a blank CD using an "Image-to-Disc" or "Bootable CD" project in your CD/DVD burning software (dont use a normal Data Project).
4) Insert the Memtest CD into your laptop and turn it on, press F12 to launch the boot menu, and select "CD".
Test the Hard Disk for errors by using DFT.
DFT Download: http://www.hitachigst.com/hdd/support/download.htm#DFT
Download the ISO File and burn it to a CD-R Disc (There is also a Floppy Disk version if that's easier).
If you dont know how to burn an ISO file, read this guide: http://www.petri.co.il/how_to_write_iso_files_to_cd.htm
Restart your laptop and boot from the DFT Disc.
Choose the "Advanced" Test and let it run (it may take an hour or so).
If you see a red message box, the HDD is faulty.
An error code 0x70 means there are bad sectors and the HDD needs replacing.

Problem with Axis Adapter endpoint url in WSDL file.

Similar Messages

Maybe you are looking for