Problem with binding value on the UI from a calculated column in the view
I have calculated field "Readiness" in my db view, which gets calculated based on other columns in the same table. I have added new column to my EO using "Add from table" option and added the same column from to VO using "Add from EO" option. In my application, I will update a particular date field in the UI and this calculated column "Readiness" in the db will be set to yes or no and this logic is working fine, both date date field and calculated field are in same view object. I have added a attribute binding to this "Readiness" column in my view page. The problem is the calculated column value does not reflect the new value in the db, it shows the old value. I have tried different refresh option for the iterator and ppr option for the field binding. Even after reloading the page, the value shown on the UI page is different from the value in db, other bindings on the UI page works fine, not sure any special settings are required for the Calculated columns. any ideas are appreciated.
Thanks for your help,
Surya
I tried to add soms debugging statements in the EO and getters method, the calcaulated column is not picking the value in db view. I'm not any special iterator/field settings are required at BC level. I'm a newbie, any help is appreciated.
Thanks,
Surya
Similar Messages
-
Problems with numeric values in the barcode
Hi
I have a problem with the data from a numeric field, when it is encoded in the barcode the validation pattern seems to be ignored.
I have set the validation pattern of the numeric field to be
num{9999}
And when I enter a value like "0200" it is displayed in the form as "0200", which is correct.
BUT in the barcode the value is captured as "200", which i NOT what I want. I need all four characters to be in the barcode. Even when the first one i 0 (zero).
How can I do that?
KirstineCan you send the form to [email protected] and I will have a look. Please include a description of the issue in the email as the email and this forum are not tied together.
paul -
Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.
how can i find out what the fix is that works..please
-
The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the Meantime?
Have you tried yesterday's update to iOS8.0.2?
iOS 8.0.2
This release contains improvements and bug fixes, including:
• Fixes an issue in iOS 8.0.1 that impacted cellular network connectivity and Touch ID on iPhone 6 and iPhone 6 Plus
• Fixes a bug so HealthKit apps can now be made available on the App Store
• Addresses an issue where 3rd party keyboards could become deselected when a user enters their passcode
• Fixes an issue that prevented some apps from accessing photos from the Photo Library
• Improves the reliability of the Reachability feature on iPhone 6 and iPhone 6 Plus
• Fixes an issue that could cause unexpected cellular data usage when receiving SMS/MMS messages
• Better support of Ask To Buy for Family Sharing for In-App Purchases
• Fixes an issue where ringtones were sometimes not restored from iCloud backups
• Fixes a bug that prevented uploading photos and videos from Safari
For information on the security content of this update, please visit this website:
http://support.apple.com/kb/HT1222 -
I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?
It could be that the existing wire in your appartment is not clean enough to provision DSL only. When combined with the phone possibly it has a higher line voltage and worked before. Now that the line is to be provisioned without phone service it may be giving them trouble that did not show before they came out and ran the new line test. So a new jack dedecated for your DSL line may require a new wire be run to your appartment. Also the account for internet only used to require direct billing to a credit card or something else. This was a number of years ago. Most accounts are linked to a phone number, and without a voice number it adds to the confusion.
If you are getting the voice and everything turned on as before, then I am at a loss for words. -
Problem getting parameter values at the service end point
I am having problem getting parameter values at the service end point. I created service end point and this method is having 35 parameters and then i created test client file using Sun One Studio 5. but when i run this test client and make a call to service it sends wrong value to first three parameters to the service end point. I tried all the way round but it gave me same sort of problem. I change the order of parameters change the names of parameters but it didn�t work. And then i started chopping of parameter from the left side. And my problem is solved when my parameter list reached to 12 from 35. So is it a bug or some problem with my configuration or some thing else.
I am using sun one studio 5 with sun one app 7. My service end point does very simple thing. It only takes out put of the parameter to the server log file. And my wsdl file seems all right. There is no conflict with the count and data type of the parameter information it contains.
� Service End Point Definition (in EJB)
public java.lang.String setNewAddress(java.lang.String propertyName, java.lang.String status, java.lang.String PMSCode, java.lang.String streetNumPrefix, int streetStartNum, java.lang.String streetStartNumSuffix, int streetEndNum, java.lang.String streetEndNumSuffix, java.lang.String streetName, java.lang.String streetType, java.lang.String streetSuffix, java.lang.String localityPrefix,java.lang.String localityName, java.lang.String postcode, java.lang.String stateCode, java.lang.String countryCode, java.lang.String description, java.lang.String coordinateAccuracy, int longitude, int latitude, java.lang.String planNumber, java.lang.String lotPrefix, int lotNumber, int siteID, java.lang.String countryName, java.lang.String parishName, java.lang.String section, int portionNum, int crownAllotNum, int titleVol, java.lang.String folio, java.lang.String esa, int aliasID, int aliasTagID,String ID) {
System.out.println(propertyName);
System.out.println(PMSCode);
System.out.println(streetNumPrefix);
........ taking printout of all the paramters
� This is my WSDL file
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="NMService" targetNamespace="urn:NMService/wsdl" xmlns:tns="urn:NMService/wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types/>
<message name="NMServiceServantInterface_setNewAddress">
<part name="String_1" type="xsd:string"/>
<part name="String_2" type="xsd:string"/>
<part name="String_3" type="xsd:string"/>
<part name="String_4" type="xsd:string"/>
<part name="int_5" type="xsd:int"/>
<part name="String_6" type="xsd:string"/>
<part name="int_7" type="xsd:int"/>
<part name="String_8" type="xsd:string"/>
<part name="String_9" type="xsd:string"/>
<part name="String_10" type="xsd:string"/>
<part name="String_11" type="xsd:string"/>
<part name="String_12" type="xsd:string"/>
<part name="String_13" type="xsd:string"/>
<part name="String_14" type="xsd:string"/>
<part name="String_15" type="xsd:string"/>
<part name="String_16" type="xsd:string"/>
<part name="String_17" type="xsd:string"/>
<part name="String_18" type="xsd:string"/>
<part name="int_19" type="xsd:int"/>
<part name="int_20" type="xsd:int"/>
<part name="String_21" type="xsd:string"/>
<part name="String_22" type="xsd:string"/>
<part name="int_23" type="xsd:int"/>
<part name="int_24" type="xsd:int"/>
<part name="String_25" type="xsd:string"/>
<part name="String_26" type="xsd:string"/>
<part name="String_27" type="xsd:string"/>
<part name="int_28" type="xsd:int"/>
<part name="int_29" type="xsd:int"/>
<part name="int_30" type="xsd:int"/>
<part name="String_31" type="xsd:string"/>
<part name="String_32" type="xsd:string"/>
<part name="int_33" type="xsd:int"/>
<part name="int_34" type="xsd:int"/>
<part name="String_35" type="xsd:string"/></message>
<message name="NMServiceServantInterface_setNewAddressResponse">
<part name="result" type="xsd:string"/></message>
<portType name="NMServiceServantInterface">
<operation name="setNewAddress" parameterOrder="String_1 String_2 String_3 String_4 int_5 String_6 int_7 String_8 String_9 String_10 String_11 String_12 String_13 String_14 String_15 String_16 String_17 String_18 int_19 int_20 String_21 String_22 int_23 int_24 String_25 String_26 String_27 int_28 int_29 int_30 String_31 String_32 int_33 int_34 String_35">
<input message="tns:NMServiceServantInterface_setNewAddress"/>
<output message="tns:NMServiceServantInterface_setNewAddressResponse"/></operation></portType>
<binding name="NMServiceServantInterfaceBinding" type="tns:NMServiceServantInterface">
<operation name="setNewAddress">
<input>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></input>
<output>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></output>
<soap:operation soapAction=""/></operation>
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/></binding>
<service name="NMService">
<port name="NMServiceServantInterfacePort" binding="tns:NMServiceServantInterfaceBinding">
<soap:address location="http://localhost:80/NMService/NMService"/></port></service></definitions>
� I followed steps given this example. http://developers.sun.com/prodtech/javatools/jsstandard/reference/docs/s1s5/stockapp.html.
If some one know what is wrong. Is it me or some thing wrong with the method I followed. But I am sure that I followed exactly the same method as it given in examples. So if some one can guide me
ThanksI just found that there is a bug with Sun One Studio 5. It creates faulty JSP file to test the client for the web services. With above problem I tested my web services using different developing environment such as Jdeveloper 10g. I created client stub using wsdl file generated by sun one studio. And made call to my web service and all the parameter reached perfectly at service end point. And then I used stub class created by sun one studio for the client and made the same call. And it also went well. So the problem is with the test application (JSP File) sun one creates for my web service.
This is the majore problem i faced during the development. But still there is many problem along with this which is not seriouse enough but requires attension. I would like sun developers to make sun one studio IDE simpler and handy . -
Problem with binding in h:dataTable
Hi
I have a problem with h:dataTable, where the table rows are bound to objects (Bean$Line) nested within a backing bean (Bean).
JSP:
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<html>
<f:view>
<head>
<link href="styles.css" rel="stylesheet" type="text/css"/>
<title>Sandbox</title>
</head>
<body>
<h:form>
<h:dataTable value="#{bean.lines}" var="line">
<h:column>
<h:outputText value="#{line.id}"/>
</h:column>
<h:column>
<!-- using value = line.lineSelected here works (assuming boolean property Line.lineSelected) --/>
<h:selectBooleanCheckbox binding="#{line.lineSelected}"/>
</h:column>
</h:dataTable>
</h:form>
</body>
</f:view>
</html>Bean:
package com.test;
import java.util.ArrayList;
import java.util.List;
import javax.faces.component.UISelectBoolean;
public final class Bean {
private final List<Line> lines;
public Bean() {
lines = new ArrayList<Line>();
lines.add(new Line("one"));
lines.add(new Line("two"));
lines.add(new Line("three"));
public List<Line> getLines() {
return lines;
* Nested class in order to access containing class
* properties etc.
public static class Line {
//private boolean lineSelected = false;
private UISelectBoolean lineSelected;
private String id;
public Line(String id) {
this.id = id;
/*public boolean isLineSelected() {
return lineSelected;
public void setLineSelected(boolean lineSelected) {
this.lineSelected = lineSelected;
public UISelectBoolean getLineSelected() {
return lineSelected;
public void setLineSelected(UISelectBoolean lineSelected) {
this.lineSelected = lineSelected;
public String getId() {
return id;
public void setId(String id) {
this.id = id;
} // Line
}The setup works when I use value="#{line.lineSelected}" (assuming the property is defined as boolean in Bean$Line) but as soon as I use a binding, I get the following exception:
com.sun.rave.web.ui.appbase.ApplicationException: javax.servlet.ServletException: javax.el.PropertyNotFoundException: Target Unreachable, identifier 'line' resolved to null
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:594)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:325)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:411)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:317)
faces_config:
<faces-config version="1.2"
xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd">
<application>
<locale-config>
<default-locale>en_GB</default-locale>
<supported-locale>en_GB</supported-locale>
</locale-config>
</application>
<managed-bean>
<managed-bean-name>bean</managed-bean-name>
<managed-bean-class>com.test.Bean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
</faces-config>What am I missing here?
Help much appreciated
LanceGuys
Thanks a lot, both of your replies are immensely instructive. Maybe a little background on what I'm trying to do. In the table, I have header rows with dependent line rows. When a check box is ticked in the header, I want the corresponding check boxes in the dependent lines to be checked automatically (in slave fashion and ideally without using JavaScript). My idea was to update the bound components (for the lines) from within the Bean (in response to change on the header). However, given there's only a single component for each column in the table, this of course doesn't make sense.
I'm trying to get to the typical MVC workflow of a) user updates a View component, b) Controller detects the change and updates the Model, c) The Model fires a property change event, which the View detects and updates appropriately. What's the way to achieve this in JSF (by design)?
Here's a simple fragment (which does not work):
<h:dataTable value="#{bean.lines}" var="line">
<h:column>
<h:outputText value="#{line.id}"/>
</h:column>
<h:column>
<!-- (1) This is the master and (2) should refresh on update here --/>
<h:selectBooleanCheckbox onchange="submit()" value="#{line.lineSelected}"/>
</h:column>
<h:column>
<!-- (2) This is the slave and I want this to update in response to a change of (1) above --/>
<h:selectBooleanCheckbox value="#{line.slaveSelected}"/>
</h:column>
</h:dataTable>In the setter method for lineSelected, I'm setting slaveSelected to the new value but the View is not refreshing based on this. How do I get the View to update (each dependent line) based on the new values for slaveSelected?
Thanks again
Lance -
Problem with binding in rich:tabPanel
I have the problem with binding in rich component. In the first request the tabPanel work fine, but in the second request the component is not displayed. When i remove binding="#{organizationController.tabPanel}" everything works well. Anybody can help me? thanks.
<rich:tabPanel style="height : 63px; width:auto; border:0px;" id="panelOrganizationForm" binding="#{organizationController.tabPanel}" >
<rich:tab label="Dados da organizacao" id="tab1">
<h:panelGrid columns="2" id="panelGridOrganizationForm">
<h:outputText value="Id: " id="idlabel"/>
<h:inputText value="#{organizationController.organization.organizationId}" styleClass="input" id="organizationId" required="true"/>
<h:outputText value="Nome: " id="nameLabel"/>
<h:inputText size="60" value="#{organizationController.organization.organizationName}"
styleClass="input" id="organizationName"/>
</h:panelGrid>
</rich:tab>
</rich:tabPanel>
<a4j:commandButton value="Voltar" action="back" id="bot" immediate="true"/>Guys
Thanks a lot, both of your replies are immensely instructive. Maybe a little background on what I'm trying to do. In the table, I have header rows with dependent line rows. When a check box is ticked in the header, I want the corresponding check boxes in the dependent lines to be checked automatically (in slave fashion and ideally without using JavaScript). My idea was to update the bound components (for the lines) from within the Bean (in response to change on the header). However, given there's only a single component for each column in the table, this of course doesn't make sense.
I'm trying to get to the typical MVC workflow of a) user updates a View component, b) Controller detects the change and updates the Model, c) The Model fires a property change event, which the View detects and updates appropriately. What's the way to achieve this in JSF (by design)?
Here's a simple fragment (which does not work):
<h:dataTable value="#{bean.lines}" var="line">
<h:column>
<h:outputText value="#{line.id}"/>
</h:column>
<h:column>
<!-- (1) This is the master and (2) should refresh on update here --/>
<h:selectBooleanCheckbox onchange="submit()" value="#{line.lineSelected}"/>
</h:column>
<h:column>
<!-- (2) This is the slave and I want this to update in response to a change of (1) above --/>
<h:selectBooleanCheckbox value="#{line.slaveSelected}"/>
</h:column>
</h:dataTable>In the setter method for lineSelected, I'm setting slaveSelected to the new value but the View is not refreshing based on this. How do I get the View to update (each dependent line) based on the new values for slaveSelected?
Thanks again
Lance -
Chart - problem with realize one of the function under CR XI
Post Author: mrowa
CA Forum: Charts and Graphs
Hello,
I have
problem with realize one of the function under CR XI. I would be persuade if
any of us would like to help me.
1)
1) From
database (basically from one table), I take data to make report. Each of record
have appropriate fields:
dteData
intYear
intMonth
intDate
2)
2) I
want to realized comparison data from two or more periods of time on one chart
and in one table. For easily explanation I will describe problem on two
periods.For instance, user want to display and compare
on chart date (type monthly -sum data of each month) from 2007.02 u2013 2007.05
with date from 2006.03 u2013 2006.06. So we compare month 2007.02 with 2006.03;
2007.03 with 2006.04; 2007.04 with 2006.05; 2007.05 with 2006.06
On char I would like to display bars with comparison
of months.
Problem is that I donu2019t know how to write
something similar. I can use one period without any problems, but two and mores
I canu2019t realized.
Detail description:
I passed
two parameters two report:
{?from}, {?to} u2013for first period
{?offset}, it means {?from}+{?offset},
{?to}+{?offset} - for second period
On axis Y I have Sum(intDate);On
X (year + month). But on each value x( example 20007.02) I need to have
two values (bars). Value for standard period and offset.
For example for x=2007.02, I need
two bars one equal 2007.02 and second with offset u2013 2006.03
Movement to next value (bar) is
persuade by fields {data.rok}&{data.month} first or second period. This is
combination of two elements year&month defined under Formula. Problem
persist in that both period has different year.month and here problem starts once
again. I donu2019t know how to solve it. I have found out one solution but it
limits user only for two periods (I want to compare more).
My idea for compare only two
periods:
I make one query in CR for one
period and second query for second period.
Firs query:
"SELECT
year ,
month
Second query
"SELECT
year + FLOOR({month + offset} % 13),
{month + offset} % 13
Then in CR I connect two periods and
make u201Ctableu201D (results of queries) with JOIN on fields year and month.
This solution is not functional,
because I need to make reports for days and hours as well. In this solution I
canu2019t use (%31), because not all months has 31 days.
I use CR in WEB app made in Visual
Studio 2005. Maybe from aspx we can manipulate with date to get exact solution,
and solve problem with SELECT.
Hope my description clearly
describe problem and someone will be able to help me. I would be thankful.I have had similar problem before.
Because I had too many data, the legend would not display all the data. Also the chart would not display all the data. But I was able to find a work around.
In your case, Right click on the Legend text and click on Format Legend Entry.
Change the font of the legend to 4 (which is the minimum). This may work.
If you are also having problem with data labels, you could change the font size of the data labels.
Hope this helps.
Thank you. -
good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
Problem with shares on Windows 2003R2 server from a Windows 8.1 PC
I'm having problem with shares on Windows 2003R2 server from a Windows 8.1 PC. It times out when I try to copy a file from my PC to the server and I get an error message saying "There is a problem accessing network drive W:\. Make sure you are
connected to the network and try again."
I have no problem copying files from the server to the PC.
Any ideas?Hi,
How about your problem now? Have you test other machine also installed Windows 8.1? Did they have this problem?
To diagnose this problem, firstly, please check Windows 2003R2 firewall settings, also can disable firewall temporarilly for test.
Secondly, try to use Network Monitor to capture network communication package for test.
Network Monitor:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Roger Lu
TechNet Community Support -
Hi Experts,
I have a problem with offset values. I have create a variable on OFISCPER, it's characteristic value, indivdual value, mandatory and ready for the input. I need to show the varibel period and the l previous period and so on till 12 periods. I used the offset values (-1, -2, etc.) but when I execute the query I can show just the variable period and the period previous I don`t see. The query is based on multiprovider and don´t has filters. Can anyone help me?Leonel,
You may nt need to have 12 columns in the query designer.
You could include the keyfigure and restrict it to the variable and create the offset for the 12 periods
Check this http://help.sap.com/saphelp_nw04/helpdata/en/00/e8d13f7fb44c21e10000000a1550b0/frameset.htm
-Doodle -
I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.
Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup -
Hello,
I have a MacBook Pro Retina Maverick in 2013 on which I installed Windows via Boot Camp 8.1.
The installation went well but when I am running Windows 8.1, I have a problem with "@" and "<" keys on the keyboard.
When I type the "@" key, I get "<"
When I type the "<" button, I get "@"
I have reinstall Boot Camp from Windows 8.1 for reinstall the drivers and see if it would solve the problem but it was not the case.
Someone of you has he encountered the same problem?
Thank you.The language of my Keyboard is French
-
The problem with GT 630M in the laptop GT580 20150
The problem with GT 630M in the laptop GT580 20150
After updating the BIOS in Windows 8, and install windows 8 has stopped working NVIDIA graphics card
message:
System Windows stopped this device because it has reported a problem occurs. (Code 43)
Tried different driver from 310.?? to 321.??
After installing the driver card is working properly. After the first reboot card stops working.
Help solve the problem!
Please!The problem with GT 630M in the laptop GT580 20150
After updating the BIOS in Windows 8, and install windows 8 has stopped working NVIDIA graphics card
message:
System Windows stopped this device because it has reported a problem occurs. (Code 43)
Tried different driver from 310.?? to 321.??
After installing the driver card is working properly. After the first reboot card stops working.
Help solve the problem!
Please!
Maybe you are looking for
-
Creating a crystal report from R/3
Hi, I am new to R/3. I am trying to create a new crystal report from R/3. I already connect crystal report with R/3 using integration kit. My problem now is i not sure which field i should i take from a which table when i look in R/3.I been provided
-
I updated to 10.6.8 and now my VPN connection is unstable. It has lost the connection to the host after 30 minutes on three different occasions. Before updating, I was able to be connected for hours with no interruption. The error reads: "A configura
-
HT1391 how do I cancel an automatic subscription?
I can no longer use my ipad but received a bill for 2 aUTOMATIC SUBSCRIPTIONS. hOW DO i CANCEL THESE?
-
Why does Lightroom not see my teathered camera in Windows 8?
When I teather my Nikon D300 in Lightroom 4, It seem as the Windows 8 operating systems takes over the function and Lightroom does not automatically open captured image. Instead, Windows' picture window appears. I have not been able to figure out h
-
Display well formatted html error page; how to
I'm using Django for my backend and mostly getting XML responses to my HttpService requests. However when I get an error on the backend, The message in the fault event is relatively useless. To debug I have to copy the request string from the alert