Problem with changing the Standard Price using MR21

I'm upgrading the system from 4.6C to ECC6.
Upgrading the Standard Price works normally in 4.6C. However, in ECC6, I notice that the data saved to CDPOS table is wrongly formatted. Therefore the other programs fail to read from this table.
Standard price is supposed to be right-justified. But it not like that in ECC6.
Can anyone tell me we should I look into to control the process of saving the data to CDPOS?
Thanks.
Han

Thanks Amuktha.
The link doesn't seem to help resolving my problem.
The changes is saved into CDPOS in the field Value_New (CHARACTER 254) in the way that the actual data can be retrieved by:
value_new+238
But any update to the standard price using MR21 now result in the value of Value_New that require:
value_new+7
to get the actual data.
Further more, in the old system, the standard price value in the decimal form like: "55.66" will be save to VALUE_NEW as "5566". So to get the real value, the system need to devide the value by 100 to get the actual new price.
In the ECC6 system, it is exactly the same as what we input: "55.66".
My question is: Is there an user exit, BADI or any way that can interfere the process of saving the data to CDPOS so that I can ensure the new Price will be save as "5566" and can be extracted using VALUE_NEW+238?
Thanks.
Han

Similar Messages

HT1918 problem with changing the payment information

I've got a problem with changing the payment information !!
when I change them and I followed the instruction , and when I click done
it says " for assistance, contact iTunes support at " the link " . and nothing
change , so what should I do ?

Hi Bart,
The description of the field VBKD-BSTKD will appear in sales order (VA01/02/03) Header Order data tab.
If you notice the text for below one it is PO Number where Number starts with upper-case N and it iis not the one which you changed.
Also this is a hyperlink to sales header order data screen.
You need to enhance the code via sales exit to fix this.

BAPI to change the standard price of the material

Hello Friends ,
I am struggling to find a BAPI to change material standard price. I found 2 BAPIs mentioned below. But was not able to make use of them.
1) BAPI_MATVAL_PRICE_CHANGE
2) BAPI_MATERIAL_SAVEDATA
Can any of you help me in finding right BAPI?

BAPI_MATVAL_PRICE_CHANGE
PRICES_CHANGE & PRICES_POST
BAPI_M_REVAL_CREATEPRICECHANGE
BAPI_MATERIAL_SAVEDATA
These are the fm's to save or change material price.

Problem in Changing the Service Order Using BAPI_ALM_ORDER_MAINTAIN

Hi ABAPers,
I want to change the Service order(TCODE-IW32) Using BAPI_ALM_ORDER_MAINTAIN.But i don't know what are all the
Parameters needs to be passed.I want to chnage the COMPONENT of the Service Order.Please anyone tell me what all are the
mandatory parameters should be passed to change the COMPONENT of the Service Order.If anyone has the code Please send me.
It is very Urgent Kindly help me to Solve this problem.
Regards,
Ashok.

Hi Ashok,
i am sending u the sample eg thread for bapi create i thnk u can find out the mandatory fields frm tht ...
check this link though it is for create the mandatory fields and structure will be same .
Create Order BAPI
regards
Sana M.
reward for useful answers..

Having problem with change of name in the datagrid Coding

I am having problem with changing the name of the datagrid header text name for one of the data either in the flash file or the php file.
The thing is i want to change the Course_Name to Course Name that has no underscore so that it will look nicer in the datagrid but if I change it in the php file like SELECT Course_Name as 'Course Name' ....., it will not turn out in the datagrid when I CTRL ENTER the flash file but the others like Price,description and display is shown.
There is no problem with my php code but I do not know how to change the Course_Name into Course Name so please help me resolve this error that I am having.
This is my flash code
function goCourse(e : MouseEvent):void
gotoAndStop(5);
refreshResponder = new Responder (refreshSuccess, onFault);
connection = new NetConnection ();
connection.connect (gateway);
dataDG.addEventListener (Event.CHANGE, gridItemSelected);
refreshData (true);
function gridItemSelected (e: Event): void {
ID = e.target.selectedItem.ID;
courseTxt.text = e.target.selectedItem.Course_Name;
priceTxt.text = e.target.selectedItem.Price;
descTxt.text = e.target.selectedItem.Description;
private function getParams () {
var param: Object = new Object ();
param.ID = ID;
param.Course_Name = courseTxt.text;
param.Price = priceTxt.text;
param.Description = descTxt.text;
return param;
private function refreshData (refresh: Boolean): void {
if (refresh)
connection.call ("Course.viewCourse", refreshResponder);
private function refreshSuccess (result: Object): void {
dataDG.dataProvider = RecordSetDP.toDataProvider (result);
dataDG.columns = ["Course_Name","Price","Description","Display"];
private function onFault (fault: Object): void {
trace (String (fault.description));
This is my php file code.
function viewCourse()
$this->connect();
$sql = "SELECT Course_Name,Price,Description,Display
FROM coursetb";
return mysql_query($sql,$this->_connection);

i don't see where you're calling your php file in your code, but change 'Course Name' to 'Course_Name' (or vice-versa) there.

What is module pool programming?how we can change the standard screen?

Hi EXPERTS
what is module pool programming?how we can change the standard screen using module pool programming ?
please explain with example.

Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
regards,
venkat.

Releasing the Standard price for the co product.

Hi All,
In my scenario , we have configure co product config and is that i have made the respective settings for the co - product in the material master with the joint production and the apportionment structure defined in the suitable ratio.. The cost estimate has been executed and the cost apportionment are resulted as per defined and it is perfect...
But when i tried to release the standard price using CK24, the price of the main product (FERT) is getting updated in the material master whereas the price of the co- product (FERT) is not updating in the material master. Is any settings has to be made from controlling aspect or settings in material master...
regards,
Mahesh

Hi Mahesh,
If you want to mark and release the non-leading co-product, you
need to create a cost estimate for it seperately. Then goto CK24,
the marking will be OK.
Regards,declan

Adobe X PDF files converted to jpg, edited and converted back to PDF have ragged, unclear text. I didn't have this problem with Acrobat 9 standard. What is the remedy for this. If this is the best I can expect, I won't be able to use X standard.

Adobe X PDF files converted to jpg, edited and converted back to PDF have ragged, unclear text. I didn't have this problem with Acrobat 9 standard. What is the remedy for this. If this is the best I can expect, I won't be able to use X standard.

I can't imagine any worse workflow than converting to JPEG to edit text, then back to PDF. Text in a PDF is a vector thing, smooth at all resolutions. And JPEG is made for photos. EVERY conversion to JPEG and back loses quality but how much loss there is will vary.
If you must go to an image format, try PNG.

Windows 7 Elevating using UAC, does not change the standard users setting, it runs the Admins settings

When elevating privilege for a standard user using an admin account, the UAC runs the application under the admins account "user" and not the standard users account "user", the problem is that doing so, it does not change the standard
users settings
In this example, trying to change the "Check for Updates Automatically" as the standard user, is grayed out, you have to be an admin to change this. This is a design of Java.
When you right click and run as an administrator, the option is no longer grayed out and can be deselected, however, this only changes that setting for the admins specific "user", not the standard users specific "user" the admin is elevating
privilege for. as illustrated below.
Is there a work around for an admin to run his credentials but elevate the standard users session instead of his own or some other way to set the standard users setting when admin credentials are required?

Hi,
Based on your description, I understand that you want to disable
Check for Updates Automatically option for standard users in Java.
You can achieve this target by editing
EnableJavaUpdate registry entry. For more details, please refer to following articles and check if can help you.
(Please back up before that registry operation. That will help us to avoid unexpected issues.)
How to disable Java Update in Windows
7
Disable Java updates with
Group Policy
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
However, this issue is related to Java product. I suggest that you should contact with Java product support.
I believe we will get a better assistance there.
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have a problem with Transport the personalization of standard ess compone

I have a problem with Transport the personalization of standard ess component.
My problem is in several components, such as:
portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/
com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/
com.sap.pct.erp.ess.area_personal_information/persinfo_es/com.sap.pct.erp.ess.13.pdata
I have personalized this page (into rol, not directly in the page), with Ctrl+Right button.
Now i transport the rol, from Development to Quality environment, but i don't see the changes in Quality.
My system is NW 7.01 SP7, Can be that the problem?
Any idea to solve this problem?

First please see note 1234273 which details how best to personalize
for all users.
http://help.sap.com/saphelp_nw04s/helpdata/en/42/ed3ce7f8593eebe10000000
a1553f7/frameset.htm
Here you can read:
"If an iView is transported to another portal all these properties are
also transported. This is needed to make sure that role-specific changes
could be transported together with the role. End user personalization
data is NOT transported in this way as end user personalization is only
local to the current portal."
Could you please ensure that personalization was done by an admin user?
I'm afraid that if it was done by an end user, personalization isn´t
transported as it's explained in the documentation provided.
Could you please confirm whether you are using exactly the same language
to access to both systems, development and quality? Maybe you are using
language en(us) in one system and en(gb) in the other one. Please take
into account that personalization is language specific.
From the web dynpro end, the WebDynpro personalization is stored
NOT in the PCD prior to 710 release. And as such it cannot be included
in a portal role transport. This feature is available with NW 7.10 SP2
or later (from webdynpro point stand). The best option is to
go with NW 7.30 as this is the first NetWeaver release with EP since
NW 7.02.

Problem with changes and visualization in the forms

I have a problem with forms, the problem is the next, I do a modification in the database with a update or with form and in other station no visualized the change. The other station need close the form and open for visualize the modification.
Why I have this problem

I am not sure what you mean. Are you saying that after one form changes and commits data, it is not visible on the other user's screen?
If that is the problem, unfortunately, that is the way Forms works. A form must re-query the data to see changes on the database. If your form must close and re-open, then you should create a trigger in your form to re-query the same data.
I hope this helps.

Hey,i forgot my login password,so i changed the password by using terminal command(reset password).now i have new user name with new password,but i can't find my data which i have saved on mac.please help me out in this matter.

hey,i forgot my login password,so i changed the password by using terminal command(reset password).now i have new user name with new password,
but i can't find my data which i have saved on mac.the storage is showing data used and free space on the disk
please help me out in this matter.

How did you change your user name?
resetpassword wouldn't have done it. If you managed to create a new user, then your data is still in the old account.

Garage Band, I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band. Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band? Any solutions

Garage Band, I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band. Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band? Any solutions

10.5.8 with latest garageband 5.1 with MBOX 1. On Nov 4.09 I did a software update, now i get no output volume or input volume to the computer itself. I get it from head phones from my mbox, but not to the computer. Before the software update It worked great. I've tried upgrading software through digidesign .com, but they dont seem to have one for what i need. any way to get my old garage band back? go from 5.1 to earlier? Or maybe it was the upgrade to 10.5.8. update? Can i go back in time lol?
Any help would be appreciated
BTW
Ive tried all the system sound prefs, and garage band drivers. Back and forth.
cheers
ds

I have a problem with iphone4 I bought a used and unlocked iphone4 old apple id because the first owner dies please help me how to activate iphone4 I unlocked with icloud

I have a problem with iphone4
I bought a used and unlocked iphone4
old apple id because the first owner dies
please help me how to activate iphone4
I unlocked with icloud

fherly nur arief wrote:
I unlocked with icloud
If you had already removed the device from 'Find My iPhone' in iCloud, then you jus tneed to powercycle the device in order to activate it.
Source: http://support.apple.com/kb/TS4515
"After the device is removed from the previous owner’s account, turn the device off by pressing and holding the Sleep/Wake button located on the top-right side of the device. Then restart your device and proceed with device setup as you would normally."
If it has not been removed, then the activation lock is still active.
If the previous owner cannot remove the device from their account there is nothing you can do unless the place you purchased it from will give you a refund.
Activation Lock: http://support.apple.com/kb/ht5818
What if I purchase a device that is still linked to the previous owner's account?
Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account.
How do I check for Activation Lock before purchasing a used device?
When purchasing an iPhone, iPad, or iPod touch from someone other than Apple or an authorized Apple reseller, it is up to you to ensure that the device has been erased and is no longer linked to the previous owner’s account.
Follow each of these steps to make sure that you can use the device you purchase:
Turn the device on and slide to unlock.If the passcode lock screen or the home screen appears, the device has not been erased. Ask the seller to completely erase the device by going to Settings > General > Reset > Erase All Content and Settings. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been erased.
Begin the device setup process.After choosing a language, choosing a country, and connecting to a network, the device will begin activation. If you are asked for the previous owner’s Apple ID and password, the device is still linked to their account. Hand the device back to the seller and ask them to enter their password. If the previous owner is not present, they can remove the device from their account by signing in to icloud.com/find. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been removed from the previous owner’s account.
You will know that a device is ready for you to use when you are asked to “Set up your iPhone", “Set up your iPad", or “Set up your iPod” during the device setup process.

We encountered a problem with some client machines that use Firefox version 24ESR and IE8. Ajax requests of aspx pages from Firefox are getting the following er

I encountered a problem with some client machines that use Firefox version 24ESR and IE8.
Ajax requests of aspx pages from Firefox are getting the following error from the iis server (iis version 7.5):
Bad Request - Request Too Long
HTTP Error 400. The size of the request headers is too long.
From analyzing the request that was sent to the server, I saw that the request consist of only the viewstate of the aspx page.
I tried to disable the viewstate for one page and the server got the request correctly.
I do not encounter any issues on these laptops with postback requests from Firefox or when running the same application with IE8.

Sometimes that means that the page address sent is loo long.
Check the link address you are using.
I can't help you further and will send for more help.

Problem with changing the Standard Price using MR21

Similar Messages

Maybe you are looking for