Problem with checkbox selection in Tableview

Hi All
I am using table view with 8 columns - in the last 4 columns i have checkboxes for user input - i have a strange problem - when the table has multiple entries - for the last column i can only select the checkbox on line 1 - and i cannot select the checkbox on the remaining entries below - but for the other colums with checkboxes this is not the case
The selection mode for the table is no line selection - since the table is already displayed with input enabled fields - this is to reduce the no of clicks for user
Can anyone point out what is going wrong - how can i fix this - what i am doing wrong ?
Thanks
Sen

Hi
When i click on the checkbox for the 2nd or 3rd rows of the last column - nothing happens - the checkox is still active but nothing happens -
this is the tableview code
<htmlb:tableView id              = "Detail"
                 design          = "ALTERNATING"
                 headerText      = "Header Text"
                 onNavigate      = "onMyNavigate"
                 emptyTableText = "test"
                 onRowSelection = "onMyRowSelection"
                 fillUpEmptyRows = "false"
                 footerVisible   = "true"
                 visibleRowCount = "5"
                 table           = "<%= DETAILTAB %>"
                 iterator        = "<%= iterator %>" >
and this is the code for the last column
<htmlb:tableViewColumn columnName         = "OBSOFLGICON"
                           width               = "3"
                           type                = "user"
                           horizontalAlignment = "CENTER"
                           title               = "Obs" >
      <htmlb:checkbox />
    </htmlb:tableViewColumn>
Thanks
Sen

Similar Messages

Problem with checkbox group in row popin of table.

In table row popin I have kept Check Box Group.I have mapped the texts property of checkbox group to the attribute which is under the subnode of the table.the subnode properties singleton=false,selectioncardinality=0-n,and cardinality=0-n.
if there are 'n' number of records in the table.each record will have its own row popin and in the row popin there is check box group.
the check box group in the row popin belongs to that perticular row.
but the checkboxegroup values in row popins of all the rows are getting changed to the row which is lead selected.
The same scenario (table in the row popin is showing the values corresponding to its perticular row and all the table values in popin are not getting changed to the one lead selected in the main table)is working fine with the table in place of checkbox group in row popin with datasource property of table binded to the subnode
I cant trace out the problem with checkbox group in place of table.
Please help me in this regard.I have to place check box group in place of table in row popin.
Thanks and Regards
Kiran Kumar K

I have done the same thing successfully with normal check box ui element. Try using check box in your tabel cell editor instead of check box group.

Problem with checkbox on table component

Hello i am having a problem with checkbox in table component
i am developing something like a shopping cart app and i have a checkbox in my table component , i want users to select items from the checkbox to add to thier cart, They can select the items from cartegory combobox , my problem is when they select the items from the checkbox if they select another category the alread selected once do not display in my collection opbject please how can i maintain the state of the already selected items in my collection object

Hi,
Please go through the tutorial "Understanding scope and managed beans". This is available at:
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/scopes.html
The details of the selected items need to be stored in an object that is in session scope.
Hope this helps
Cheers
Girish

Problem with checkbox column in matrix

Hello.
I have a little problem with checkbox column in matrix.
Column is binded to the UserData.
It has ValOn="Y", ValOff="N".
I use C++. It is wird problem. In matrix I have 10 columns - scrollbar role and if You want see checkbox column, You must role to the right. If this column is on the screen, and I use:
checkcell->PutChecked(VARIANT_TRUE);
then the checkbox is cheched, and if the checkbox isn`t on the screen and I use this comment - it nothing happening.
I tried to use ValOn="Y", PutChecked...
The problem i solved if the column is on the screen - if the column is first in matrix or second, but if it`s last I have a big problem.
My column with checkbox is not editable, but I tried to make it editable, check it, and then make it uneditable - the same efect.
How can I solve it ?
Sorry for my english.
Kamil Wydra

Hello Kamil,
I am not sure about your problem, but here is an example of how to use checkbox in UI API.
First, create the matrix with checkbox column in Screen painter, and the output is an xml file, like this. Type as 121 indicates that it is a check box.
- <column AffectsFormMode="0" backcolor="-1" description="" disp_desc="0" editable="0" right_just="0" title="Rented" type="121" uid="Rented" val_off="N" val_on="Y" visible="1" width="41">
<databind alias="U_RENTED" databound="1" table="@VIDS" />
<ExtendedObject />
Second, bind the column to table from DB. This is a bug of 2004 Screen Painter, so if you are using 2005 Screen Painter, there is no problem.
Third, when you open the form, you can check and uncheck the cell.
BTW, please set the editable of the column to true.
Hope this helps,
Nick

Problem with checkbox in the selection screen

Hi guys,
I have a problem with the check box in the selection screen.When i select a check box then a field in the selection screen should be enabled for entering a value.Again if i unselect the checkbox then the field should be disabled for entering a value.I have written the code in at selection-screen output.
The problem is when i select the check box ,the field is not enabled.But when i press enter after selecting the checkbox then the field is enabled for input.It is the same when i unselect the checkbox,after i press enter only the field is getting disabled.What could be the problem.Any suggestions please?
Thanks.

Hi d p
             Please try this code . I think this code have some way that you would like.
REPORT zdownload_to_application_server.
TABLES : caufvd, jest.
I N C L U D E P R O G R A M                                        *
*INCLUDE znrpstnd.
Selection Screen                                                    *
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
PARAMETERS: p_outb RADIOBUTTON GROUP g1 USER-COMMAND outb DEFAULT 'X' ,
            p_inb RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
PARAMETERS : p_werks LIKE caufvd-werks MODIF ID a.        " Plant   "OBLIGATORY
SELECT-OPTIONS : s_auart FOR caufvd-auart MODIF ID a,       " Order Type
                   s_aufnr FOR caufvd-aufnr MODIF ID a.       " Order number
PARAMETERS: p_path TYPE string DEFAULT 'C:\SchedulerInterface-OutboundTextFile\' MODIF ID a,
            p_actual AS CHECKBOX MODIF ID a.                  " Transfer Actual
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETERS : p_werks2 LIKE caufvd-werks MODIF ID b,   " Plant   "OBLIGATORY
             p_path2 TYPE string DEFAULT 'C:\SchedulerInterface-InboundTextFile\' MODIF ID b,
             p_path3 TYPE string DEFAULT 'C:\SchedulerInterface-InboundTextFile\' MODIF ID b,
             p_sessio TYPE apqi-groupid MODIF ID b.   " BDC Session
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
IF p_outb EQ 'X'.   " Outbound --> Hide inbound
    LOOP AT SCREEN.
      "IF screen-name = '%BT02011_BLOCK_1000'.
      IF screen-group2 = 'BLK'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'A'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'B'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      "IF screen-name = '%BT01004_BLOCK_1000'.
      IF screen-group3 = 'BLK'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'A'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'B'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path2.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_path         = 'C:\SchedulerInterface-InboundTextFile\'
      mask             = ',Text Files,.txt,All files,.*.'
    IMPORTING
      filename         = p_path2
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path3.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_path         = 'C:\SchedulerInterface-InboundTextFile\'
      mask             = ',Text Files,.txt,All files,.*.'
    IMPORTING
      filename         = p_path3
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
TOP-OF-PAGE.
START-OF-SELECTION.
Regards
Wiboon

Problem with CheckBox as table cell renderer

i m making a JTable having three columns.
i m also making a cellRenderer of my own MyRenderer
extending Jcheckbox and implementing TableCellRenderer
now i m setting MyRenderer as renderer for third column in my table and
DefaultCellEditor with jcheckbox as parameter as cell editor for this column
the code is like this--------------------
****making of JTable****
table= new JTable(3,3);
JScrollPane scrollPane = new JScrollPane(table);
TableColumn tableColumn = table.getColumn("Male"); // let us suppose that this gives third column
tableColumn.setCellRenderer(new MyRenderer ());
tableColumn.setCellEditor(new DefaultCellEditor(new JCheckBox()));
*****The classs implementing TableCellRenderer is given below******
class MyRenderer extends JCheckBox implements TableCellRenderer{
public MyRenderer(){
public Component getTableCellRendererComponent(JTable table, Object value,
boolean isSelected, boolean hasFocus,
int row, int column){
if(value != null){
Boolean booleanValue = (Boolean)value;
setSelected(booleanValue.booleanValue());
return this;
***********************************Problem****************************
The problem is that when we click on the cell of that column first time,
all the cells are selected.
I don't want to use getColumnClass() method for this problem .
If possible , please give some other solution.
what is the problem behind this,If anybody can help us.
Thanks in advance.

I think the problem is, when the value is null the checkbox return with the selected state, b'coz u r
returning the checkbox (as it is). so pl'z try with below code (ADDED).
public Component getTableCellRendererComponent(JTable table, Object value,
boolean isSelected, boolean hasFocus,
int row, int column){
if(value != null){
Boolean booleanValue = (Boolean)value;
setSelected(booleanValue.booleanValue());
else /// ADDED
setSelected(false);/// ADDED
return this;
Nediaph.

Problem with Checkbox that disables/enables other components.

Hi
As I show in the title, I have problems with a checkbox that enables/disables another components (three exactly).
I have done the follow:
1.- Set property "AutoSubmit" true in the SelectOneChoice
2.- Set "Disabled" property true or false depending if the SelectOneChoice is selected or not
(#...selectBooleanCheckbox.value?false:true})
3.- Set the Partial triggers to the SelectOneChoice in the three components.
CASE 1: The SelectOneChoice is unmarked. The three components appears disabled and when I mark the SelectOneChoice, this components appears enabled. The thing works ;)
CASE 2: The SelectOneChoice is marked. The three components appears enabled and when I unmark the SelectOneChoice, the components continue enabled. They don't disable until I press the submit button.
how can i make that the components appears disabled when i unmark the checkbox?
i try with de ChangeValueListener, but it only works where the SelectOneChoice changes from unmarked to marked.
thanks!

I think the problem is, when the value is null the checkbox return with the selected state, b'coz u r
returning the checkbox (as it is). so pl'z try with below code (ADDED).
public Component getTableCellRendererComponent(JTable table, Object value,
boolean isSelected, boolean hasFocus,
int row, int column){
if(value != null){
Boolean booleanValue = (Boolean)value;
setSelected(booleanValue.booleanValue());
else /// ADDED
setSelected(false);/// ADDED
return this;
Nediaph.

ADF Table with CheckBox - Select/deselect issue

I have seen couple of threads and blogs for ADF table with check box . but none of them exactly matching with my requirement . My Database table does not have any field for check box .
Here is my DB Table
tableA_
A_Id
A_Name
tableB*
B_Id
Requirements :*
1. Display the above tables data with Checkbox . ( if A_Id = B_Id then the checkbox will be checked , else unchecked ) .
2. Select / deselect the check box and save the data . Saving the data , will update only tableB . i,e when a new check box is selected then A_Id value will be inserted to tableB . Similarly , deselecting a checked in data will remove the entry from tableB.
Development :
1. Created a VO where tableB has marked as updateable .
2. Created a transient Boolean variable for checkBox . and modified the getter method of checkbox for returning true/false based on the below condition in the ViewRowImpl Class .
if ( A_Id = B_Id )
return true;
else false ;
3. I have not modified the setter method .
Using the above concept i can view the data with selected checkbox . but the problem is to save the data . because , when I select a checkbox the above coding in the getter method will return false .
Therefore , though i am selecting the checkbox but value of the checkbox has been set as false .
While saving the Data , I am iterating through the VOIterator and observed that a newly selected checkbox value is false . and realized its because of the getter method condition .
Can you please suggest how can I overcome this issue or shall I need to take any other approach ?
Jdev version 11.1.1.5
Regards,
Amitava
Edited by: Amitava on Mar 17, 2012 3:48 PM

You need to go through the ADF page life cycle concepts. In simple words the boolean value in the model is not set while in valueChangeListener. Try adding valueChangeEvent.getComponent().processUpdates(FacesContext.getCurrentInstance()); on top in your listener method and see the effect.
Reference:
http://docs.oracle.com/cd/E15051_01/web.1111/b31974/adf_lifecycle.htm

Problems with the selection of text or objects

dear fireworks community!
unfortunately i have problems with my running version fireworks (CS6) and i can't find any solution or even get help via the customer support.
i can't switch between objects with a click, when i've choosen one already. i also can't cancel the entire selection. the only way (to select a new item) is to click on an empty space, hold it and pull the selection over a new item.
another thing is that i cant select a textfield with a doubleclick or switch beteween choosen tools within the usage of a shortcut …
what i already tried:
updating, deinstalling, re-storing preferences, "cleaning" the libraries, installing (this entire scenario for at least three times)
i hope someone of you can help me!
thanks in advance!

incredible!
thank you so much!

Problem with checkbox value and app.settings.getSetting()

Hello everyone.
I`ve got a problem with getting saved settings for checkbox.
Saved settings doesn`t apply on checkbox value.
It`s strange, but it always "true".
So here piece of code:
checkMe = 11;    //any value for the first time running
if (app.settings.haveSetting("savea", "chck")) {
                      checkMe = app.settings.getSetting("savea", "chck"); // get saved value, else 11
                      alert("checkMe = "+checkMe)
                    if(checkMe == 11){
                        checkMe= false;   //if there is no saved settings, checkbox value will be false/ unchecked
                        alert("You run this script first time, so manual value will be 'false'")
                        }else{
                            checkMe = app.settings.getSetting("savea", "chck");     // if saved settings exist, get true or false
     alert("Yes, checkMe will = "+checkMe)
win.checkPanel.chkOne.value = checkMe; /// checkbox value will equal saved checkMe
var fff = win.checkPanel.chkOne.value; // string for alert
alert("aha! but checkbox value is = " +fff+ "\n Why so?")     // here we`ve got always "true"
win.checkPanel.chkOne.onClick = function () {
    var path11 = win.checkPanel.chkOne.value; // checkbox value to variable
    app.settings.saveSetting("savea", "chck", path11); //saving checkbox value
    alert("Saved this value - " + app.settings.getSetting("savea", "chck"))
win.checkPanel.chkOne.value is always true.
Can someone exmplain why and how to get rid of this static value?
P.S. just in case, here is full code:
function mainFun()
    this.windowRef = null;
mainFun.prototype.run = function()
    /*----- UI -----*/
          var retval = true;
          var win = new Window("palette", "Check option", [150, 150, 460, 455]);
          this.windowRef = win;
          win.checkPanel = win.add("panel", [25, 150, 285, 265], "Checkbox");
          win.checkPanel.chkOne = win.checkPanel.add("checkbox", [10, 15, 125, 35], "Checkbox One");
          //win.checkPanel.chkTxtOne = win.checkPanel.add('edittext', [140, 15, 230, 35], '');
     win.quitBtn = win.add("button", [110,275,200,295], "Close");
checkMe = 11;    //any value for the first time running
if (app.settings.haveSetting("savea", "chck")) {
                      checkMe = app.settings.getSetting("savea", "chck"); // get saved value, else 11
                      alert("checkMe = "+checkMe)
                    if(checkMe == 11){
                        checkMe= false;   //if there is no saved settings, checkbox value will be false/ unchecked
                        alert("You run this script first time, so manual value will be 'false'")
                        }else{
                            checkMe = app.settings.getSetting("savea", "chck");     // if saved settings exist, get true or false
     alert("Yes, checkMe will = "+checkMe)
win.checkPanel.chkOne.value = checkMe; /// checkbox value will equal saved checkMe
var fff = win.checkPanel.chkOne.value; // string for alert
alert("aha! but checkbox value is = " +fff+ "\n Why so?")     // here we`ve got always "true"
win.checkPanel.chkOne.onClick = function () {
    var path11 = win.checkPanel.chkOne.value; // checkbox value to variable
    app.settings.saveSetting("savea", "chck", path11); //saving checkbox value
    alert("Saved this value - " + app.settings.getSetting("savea", "chck"))
          win.quitBtn.onClick = function() {
              win.close();
    win.center();
          win.show();
          return retval;
if(typeof(mainFun_unitTest) == "undefined") {
    new mainFun().run();

Played around with different values, combinations...
Doesn`t work too:
checkMe = 111;    //any value for the first time running
if (app.settings.haveSetting("333", "check")) {
                      checkMe = app.settings.getSetting("333", "check");
alert(checkMe);
                if(checkMe == 111){
                         win.checkPanel.chkOne.value= false;
                        }else{
                            if (checkMe != false){
                            win.checkPanel.chkOne.value= true;
                            }else{
                            win.checkPanel.chkOne.value= false;
win.checkPanel.chkOne.onClick = function () {
    var path11 = win.checkPanel.chkOne.value;
    var path12 = path11.toString();
    app.settings.saveSetting("333", "check", path12);
    alert("Saved value - " + app.settings.getSetting("333", "check"))

Problem with checkbox and Event.stop(event)

Hello,
I cannot change the checkbox in a row, if the Event.stop(event) is fired on checkbox. My aim is, that the event OnRowClick is stoped, if I change the checkbox in the row.
<rich:extendedDataTable id="requestTable" value="#{requestListHandler.normalisedRawRequestList}" var="req"
                         rows="#{requestListHandler.limitRows}" selectionMode="single">
                         <a4j:support event="onRowClick" action="#{requestListHandler.viewRequest}">
                              <f:setPropertyActionListener value="#{req}"
                                   target="#{requestHandler.selectedRequest}" />
                              </a4j:support>
                        <rich:column>
                                   <h:outputText value="#{req.offerListSize}">
                                        <f:convertNumber type="number" />
                                   </h:outputText>
                     </rich:column>
                         <rich:column id="checkBoxColumns">
                                   <h:selectBooleanCheckbox onclick="Event.stop(event);"
                                        value="#{req.firstInterpreterTimeChecked}"/>
                     </rich:column>
</rich:extendedDataTable>I know I am using richfaces, but I have problem with sun-ri component <h:selectBooleanCheckbox..../>.
Have you any idea?
Manu
Edited by: Argonist on Jun 16, 2009 8:27 AM
Edited by: Argonist on Jun 16, 2009 12:25 PM

I had the same problem. I read you post and was so disappointed that no one had answered you. But I have a good news for you :) My team leader managed to solve this awkward problem.Add to h:selectBooleanCheckbox style="z-index: 20;" so that it is "above" the table row that fires its own onclick event.

Problem with checkbox and process

Hallo,
I have a checkbox on my page and now I want to create a process that runs when the checkbox is checked.
What I want to do is: to ckeck wheather the checkbox is check and if this is then to set values.
I don't know if it is right how I check the status of the checkbox. What I also don't really know how I can decide
that all field I go through in the loop get the same value from the XYZ-collection. The value should be the last from
the XYZ-collection.
Thanks, Jade
declare
check integer:=0;
change integer:=0;
begin
check:=:Px_Check;
if (check <> 0) then change:=1; end if;
if change = 1 then
for i in 1..htmldb_application.g_f04.count
loop
htmldb_collection.update_member_attribute(p_collection_name=>'XYZ',
p_seq=>i,
p_attr_number=>5,
p_attr_value=>???);
end loop;
end if;
end;

Hi,
Taking the two issues separately....
1 - When dealing with checkboxes, you have to bear in mind that the submit process will only return the values of those checkboxes that have been ticked into the f04 collection (assuming f04 is the column containing your checkboxes). In order to determine which ones they are, you need to get the value (which should be a row number if you've created the checkboxes by using the Row Selector option) and then use that to get to the values on the actual rows. Something like:
DECLARE
vITEM NUMBER;
BEGIN
FOR i IN 1..HTMLDB_APPLICATION.G_F04.COUNT
LOOP
vITEM := HTMLDB_APPLICATION.G_F04(i);
END LOOP;
END;Then, within the loop, you can use vITEM as the row number. So, if the user ticked items 1, 4 and 6. G_F04(1) would contain 1, G_F04(2) would contain 4 and G_F04(3) would contain 6. Therefore, for you update statement, you can use vITEM for the sequence number of the item to update.
2 - When dealing with collections, if you want to get to the last item in the collection, you can get the member count and use that to get to the member:
DECLARE
vCOUNT NUMBER;
vDATA NUMBER;
BEGIN
vCOUNT := HTMLDB_COLLECTION.COLLECTION_MEMBER_COUNT ('XYZ');
SELECT c005 INTO vDATA FROM HTMLDB_COLLECTIONS WHERE COLLECTION_NAME = 'XYZ';
END;That should get the c005 value for the last item and store it in vDATA. You can then update the ticked items with this value.
Andy

Problem with column selection in GUI_DOWLOAD

Hi everyone !
I want to save data from an internal table to a DAT file using GUI_DOWLOAD. In this internal table, there are 2 colums that won't be downloaded so I call the FM this way :
    CALL FUNCTION 'GUI_DOWNLOAD'
         EXPORTING
              FILENAME                = L_FILE
              FILETYPE                = 'DAT'
              COL_SELECT              = 'X'
              COL_SELECT_MASK          = V_COLSELECT
         TABLES
              DATA_TAB                = TAB_OUT
              FIELDNAMES              = TAB_FIELDNAMES.
V_COLSELECT contains an 'X' for each column I need to be downloaded and a space for the 2 other columns.
In the result file, the columns that I didn't select don't appear BUT there are 2 columns with no header and filled with zeros at the right edge of the file. I don't know where these 2 columns come from. Maybe a problem with fieldnames but I'm not sure (in TAB_OUT, all columns are present but in TAB_FIELDNAMES there are only headers for the selected columns).
If anybody have an idea, please just tell me.
Points will be rewarded for helpful answers.
Thanks.
Nicolas.

Hi,
Try to keep fields same in TAB_FIELDNAMES and TAB_OUT. because anyway you are using COL_SELECT_MASK.
I think you are using COL_SELECT_MASK properly ie
if you have 6 field in the TAB_OUT out of that you need to donwload 1,3,6 then your
COL_SELECT_MASK will be X X X
aRs

Problem with variable selections

Hi All
I am executing the report with period 46.2007-50.2007 . I am getting the result for this period.But if i run the report with same selections from 42.2007-50.2007, I am not getting the data.It says no applicable data found.
I am using interval as the option for variable .Could some one help on this?
Thanks
Raghu N

Hello
According to your selection you should get the data.
check the both selection (46 - 50) and (42 - 50) in the LISTCUBE transaction.
if data available in both cases then problem may be with other restrictions.
If no user exits are in that variable try create one more variable as it is and then try by restricting with new variable.

Problems with customizing select lists and popup LOVs

Hi
I have 2 problems about select lists and popup LOVs.
The first one is about a select list in a tabular form.
It should be created with APEX_ITEM.SELECT_LIST_FROM_LOV or similar and take its values from a named LOV.
This worked fine but now it should also have the possibility to enter a free value.
I tried to accomplish that by creating a APEX_ITEM.POPUP_FROM_LOV, but there is a problem with the function that is called by the arrow icon right to the input field (for eg. genList_f11_5()).
If the row is added by addRow, then it works fine, but if the row is is not empty
then the function call is like genList_f11_$_row() and the input field gets no value, when a LOV option is selected.
The other problem is about a select list which should have the possibility to enter a custom value and
also there should be the possibility to select several values. I tried to implement this by a text area containing the selected values and a multiple select list, with an event handler in each option. The user could click options and they would be copied to the text area. The problem is that I couldn't make the event handler work in IE.
I would appreciate any ideas about either of these problems.
Tiina

Hi,
If you download application you can see source.
I have not write any instructions, sorry.
If you are on Apex 4 you can just load jQuery UI autocomplete library and take ideas from my app.
If you download my sample in zip there is uncompressed htmldbQuery library.
You can see that and take only function htmldbAutocomplete.
Then check jQuery UI document
http://jqueryui.com/demos/autocomplete/#method-search
There is method search that you can use open list just by click of input.
I hope this helps at start.
Regards,
Jari

Problem with checkbox selection in Tableview

Similar Messages

Maybe you are looking for