Problem with data acquisition and motion control
I have PCI-6024E and PCI-7342 cards on a single PC. Servo motion control works fine when it goes alone or is accompanied by one point data acquisition in a while loop, but when I start data acquisition with specified sample rate, the motor moves with breaks.
Does anybody know what is the problem? Is it possible to fix it?
How are you performing your motion? Is it a position move or a velocity move? How are your triggering the data acquisition? Using breakpoints on the 7342? If so, are you using single breakpoints or modulo? How are you configuring the data acquisition rate? Are you triggering just the start to the acquisition and the unsing the daq scan clock or are you using the motion controller to send the scan clock itself?
Similar Messages
-
A problem with data acquisitioning in LV 7.1 (transition from Traditional NI-DAQ to NI-DAQmx)
Hi to everyone,
I have a problem with data acquisitioning in LV 7.1.
I made a transition from Tradiotional NI-DAQ to NI-DAQmx in my LabVIEW application.
The problem I have is that when I acquire data in Traditional (without writing somewhere -
just reading) then there is no scan backlog data. But when I acquire data in application that
acquisition is based on DAQmx than a scan backlog indicator shows numbers from 20 to 50 for
about 6 min and then that number quite quickly increases until I get an error (unable to
acquire data. The data was overwritten).
Acquisition settings are the same in both cases. When I acquire with DAQmx I use a global
channels. Is a reason for that phenomenon in global channels data procesing? But it seems
strange why does it flows quite smoothly for about 6 min and then it stucks?
Best regards,
EroIf you have an old Daq unit it may not be compatible with DAQMX. Which DAQ unit do you have? I think NI have a list showing which DAQ driver you can use with your card
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far) -
Problem with Date Picker and wwv_flow_item.date_popup()
I have a Report based on the HTMLDB How-To âBuild Tabular Forms for Multi-Row Operationsâ
This is my code:
select
X.RRIT_UID,
X.DOS,
X.CPT_CODE,
X.MOD,
X.DX_CODE,
X.CHARGES,
X.UNITS
from
(select
htmldb_item.text(1,RRIT_UID) RRIT_UID,
wwv_flow_item.date_popup(2,null,RRIT_DATE_OF_SERVICE) DOS,
htmldb_item.text(4,RRIT_SUBMIT_SERVICE_CODE,6) CPT_CODE,
htmldb_item.text(5,RRIT_SUBMIT_MODIFIER,3) MOD,
htmldb_item.text(6,RRIT_ATT_DIAG_CODE,6) DX_CODE,
htmldb_item.text(7,RRIT_BILLED_CHARGES,9) CHARGES,
htmldb_item.text(8,RRIT_UNITS,3) UNITS
from
RRIT_REPRICE_ITEM
where
RRRR_UID = :P5_RRRR_UID
union all
select
htmldb_item.text(1,null) RRIT_UID,
wwv_flow_item.date_popup(2,null,null) DOS,
htmldb_item.text(4,null,6) CPT_CODE,
htmldb_item.text(5,null,3) MOD,
htmldb_item.text(6,null,6) DX_CODE,
htmldb_item.text(7,null,9) CHARGES,
htmldb_item.text(8,null,3) UNITS
from
dual)
X
My problem is when I run the page and select a date from the Pop-Up calendar I get this error:
Line 10
Error: âopener.document.forms.0.f02.0â is null or not an object
I know it is something to do with data formats and the fact that I do not fully understand the use of wwv_flow_item.date_popup().Hi DK,
It is a WD Java application, Backend is ABAP (MM module).
The UI is input field, where the context attribute type is Date, So its been changed to Date Picker.
The problem is when the user runs the WD application in Portal, The calendar format is being changed for some users. That is for few users the Week starts with Monday and for few users the week starts with Sunday.
I need all the users to have Monday as the First day of the week.
Please let me know, what will be solution for this.
Since I haven't done anything in regard to date, it is a simple Date format.
Thanks & Regards,
Palani -
Problem with Data Model and Analysis View
I create an analyze in BI Publisher and then i create a data model using this object.
When i try to generate an XML with a number of rows the BI Publisher return an empty XML (Only with de DATA_DS tags but no data). To bypass this problem i make and XML file by hand and this allow me to create reports and design it but when i try to view the reports i got the message that says "No Data Found".
So i was check the analysis and all looks appears to be fine, In the results tab it show me a complete table with the data i was looking to use.
So i try to repeat the error and when i try to create the XML for the Data Model i found this two error in the logs:
[root@server ~]# [2013-07-17T16:37:22.844-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b34,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:37:26.828-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:37:26.865-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] oracle.xdo.servlet.CreateException: Path: /FOLDER/MODEL.xdm is not pointing to a report. Actual type: ReportItem, sub-type: DataModel[[
at oracle.xdo.servlet.ReportException.fillInStackTrace(ReportException.java:124)
at java.lang.Throwable.<init>(Throwable.java:196)
at java.lang.Exception.<init>(Exception.java:41)
at oracle.xdo.servlet.ReportException.<init>(ReportException.java:36)
at oracle.xdo.servlet.CreateException.<init>(CreateException.java:18)
at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:104)
at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:128)
at oracle.xdo.servlet.dataengine.DataProcessorFactory.getDataModelPath(DataProcessorFactory.java:207)
at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:99)
at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:78)
at oracle.xdo.servlet.ReportModelContextImpl.getReportXMLData(ReportModelContextImpl.java:157)
at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:346)
at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:101)
at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1074)
at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:639)
at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:492)
at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:462)
at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:280)
at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:313)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:125)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
And when i try to view the report that use the analysis i got this two warning in the logs:
[2013-07-17T16:58:01.615-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d7c,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:58:02.034-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d84,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
As i understand there is has a reference to a null value but i cant find what column of the analysis has the problem.
Any ideas about how to solve or debug this?
ThanksI follow your instructions and it works fine. I can create the XML and the reports can show data.
So, i already know that there is no problem with the data and with the BI Publisher installation but i still doesn know what is the problem with the analysis view that fails.
Any idea how to debug it?
Thanks. -
Problem with data table and internal and external command button
thanks for your time,
i have this problem
<t:dataTable binding="#{manejadorAsociarEvaluadoresProyecto.tablaPosiblesEvaluadores}"
cellpadding = "6"
cellspacing = "3"
value = "#{manejadorAsociarEvaluadoresProyecto.listaPosiblesEvaluadores}"
var = "posibleEvaluador"
preserveDataModel="false">
<h:inputTextarea value="#{posibleEvaluador.correoActualCuerpo}"
cols="50"
rows="50"
rendered="#{posibleEvaluador.detalle}" />
<h:commandLink immediate="false" action="#{posibleEvaluador.editar}" value="Editar Correo"/>
</t:dataTable>
<h:panelGroup id="panelBotonEvaluadores" rendered="#{!manejadorAsociarEvaluadoresProyecto.b_mostrarEvaluadores && manejadorAsociarEvaluadoresProyecto.tieneProyectos}">
<h:commandButton action="#{manejadorAsociarEvaluadoresProyecto.mostrarEvaluadores}"
value="Asociar evaluadores"/>
</h:panelGroup>
this is the method of posibleEvaluador
public String editar()
setDetalle(!getDetalle());
return "";
all run perfect, until y click in "asociar evaluadores" button, after of this the commandLink "editar Correo" not run, this commanlLink is for not show the inputTextArea, i don't know what happend.
thanks for your helpHello,
I have replicated and confirmed the problem with LabVIEW 2010, Report Generation Toolkit 2010 and Word 2010. I have filed this to R&D under CAR ID #257414. As a workaround you can manually set each cell using Word Edit Cell.vi. I have attached a simplified representation of this unexpected behavior as well as the workaround. Hopefully this helps everyone out!
David_L | Certified LabVIEW Architect
LabVIEW Tools Network | LabVIEW Tools Network Developer Center
Attachments:
Word 2010 Table CAR.vi 17 KB
Word 2010 Table FIX.vi 22 KB -
Help: Problem with data types and classes
Hi there,
I'm currently struggling with getting a class to read in data from a file and from that select the correct constructor to use... Basically I read a line in from a file as follows:
<String Make>:<String model>:<String registrationNumber>:<String engineSize>
e.g.
Ford:Focus:HG42EG:1800
There is an Interface called Car, of which 'Ford' is an implementation along with 'Vauxhall', 'Chrysler', etc...
From this I wish to construct a new instance of a Ford called Focus with input parameters (RegNumber registration,int engineSize) i.e.
Car Focus = new Ford(HG4 2EG,1800);So far I can convert the engineSize String into an integer and can construct the RegNumber (a class of mine) but can only get it to construct a Ford by using a switch, i.e:
switch (modelKey){
case 'f': new Ford(); break;
case 'v': new Vauxhall(); break;
case 't': new Toyota(); break;
etc...
Now I do get this to work correctly but I'm concerned that it is not OOP therefore is the way I can get code to convert the String 'Ford' into Car 'Ford'.???
Many thanks in advance for any advice you can throw my way,
LeeboWhat is this anyway???
If Car is an interface you can't create instances of it....No, if Car is an interface, his code should be (depending on what the RegNum constructor looks like:
Car Focus = new Ford(new RegNum("HG42EG"),1800);It's the same as:
List someList = new ArrayList();However, he won't be able to use a word read from the file as a variable name "Focus". He'll need a Map:
Map myCarMap = new HashMap();
myCarMap.put("Focus", new Ford(new RegNum("HG42EG"), 1800));(Could be defined as "Map<String, Car>" if he wants to use generics.) -
Tp ended with error code 0247 - addtobuffer has problems with data- and/or
Hello Experts,
If you give some idea, it will be greatly appreciated.
This transported issue started coming after power outage, sap system went hard shutdown.
Then we brought up the system. Before that , we do not have this transport issue.
our TMS landscape is
DEV QA-PRD
SED-SEQSEP
DEV is having the TMS domain controller.
FYI:
*At OS level, when we do scp command using root user, it is fine for any TR.
In STMS, while adding TR in SEQ(QA system), we are getting error like this.
Error:
Transport control program tp ended with error code 0247
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
Return code: 0247
Error text: addtobuffer has problems with data- and/or
Request: SEDK906339
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
This is tp version 372.04.71 (release 700, unicode enabled)
Addtobuffer failed for SEDK906339.
Neither datafile nor cofile exist (cofile may also be corrupted).
standard output from tp and from tools called by tp:
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247when we do scp using sm69,
SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
it throws the error like below,
Host key verification failed.
External program terminated with exit code 1
Thanks
Praba -
URGENT ! JDEV 10.1.2 Problem with data control generated from session bean
I got a problem with data control generated from session bean which return a collection of data transfer object.
The dto's seem to be correct. The session bean load correctly the data into and the object's are plenty of data. Using the console to display the dto content is ok.
When generating a data control from this session bean and associate the dto included in the collection only the first object level and one-to-one dto object are correctly setted in the data control. Object that represent collection into the dto (one-to-many foreign key) are setted as collection with an iterator but the structure of the object is not setted. I don't know how to associate this second level of collection with the dto bean class to obtain the attributes definition.
I created a case with hr schema like the hrApp demo application in the tutorial with departments and employees table. I got the same problem.
Is it a bug ?
It exists a workaround to force the data control to understand the collection data structure ?
Help is welcome ! this is urgent !!!we found the problem by assigning the child dto bean class to the node representing the iterator in the xml file corresponding to the master dto.
-
having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
I'm using Lion on an MBP and Numbers is the latest versionMay you give more details about what is wrong with your dates ?
M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios -
has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.
fair enough. No need for any unnecessary posts either. You issue had been addressed ad nauseum already in this forum had you bothered to search this forum (as forum etiquette would dictate) before posting.
In any case, I hope that your problem was solved. -
I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.
Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Does anyone have problems with data usage with att and Iphone5?
Hello, Does anyone have problems with data usage or non usage I should say with Iphone 5 and AT&T?
After 4+ months of dealing with this data usage and battery drain problem that included 3 data captures of my wife's iMac, the trigger for us regarding the problems syncing with iCloud, and 5 hours of logs off my iPhone 6 to be analyzed by Apple engineers that included times my wife's computer was both on and off to demonstrate the difference in data usage and battery drain under those conditions, I can say with very reasonable certainty that the iOS 8.3 and corresponding Mac OS 10.10.3 update has solved the problem.
We have now been running for about 2 weeks and data usage with the iCloud Servers attempting to sync has dropped from a rate of 31 GBs to under 15 MBs per month. Yes, you read it right. We were burning 2000 times as much data doing absolutely nothing important on both of our phones, a 5s and a 6. Just imagine what that does to battery life! The 5s would last about 5 hours and the 6 was dead in less than 14.
The distasteful aspect of this process was how the engineers were quietly fixing the problem at the same time sending messages to my contact person within Apple that were dismissive in nature in the face of indisputable unreasonable results. I must say, this experience with the multiple times the engineers' responses were inappropriate put a little tarnish on the old Apple shine of the ‘It just works’ mantra. This was my first experience in 34 years that caused me to stop recommending Apple products without reservations and with a disclaimer.
Since the update solved the problem, then I can only conclude that there was a logic bug regarding the reaction within the process to the incoming data that was corrected. There was noting short of logging out of iCloud that circumvented the problem for us, Gator5000e and probably many others noted on other threads. I am not trying to imply that this is the cause of everyones battery use problem, but it is reasonable that it was a cause for many. -
Problem with the MenuBar and how can i delete a own component out of the storage
Hello,
I opened this thread in the category "Flex Builder 2", but
under this category my questions fit better.
I have a problem with the MenuBar and a question to delete a
component out of storage.
1. We have implemented the MenuBar, which was filled
dynamically with XML data.
Sporadically it will appear following fault, if we "mousover"
the root layer.
RangeError: Error #2006: Der angegebene Index liegt
außerhalb des zulässigen Bereichs.
at flash.display::DisplayObjectContainer/addChildAt()
at mx.managers::SystemManager/
http://www.adobe.com/2006/flex/mx/internal::rawChildren_addChildAt()
at mx.managers::SystemManager/addChild()
at mx.managers::PopUpManager$/addPopUp()
at mx.controls::Menu/show()
at mx.controls::MenuBar/::showMenu()
at mx.controls::MenuBar/::mouseOverHandler()
Here a abrid ged version of our XML to create the MenuBar:
<Menuebar>
<menu label="Artikel">
<menu label="Artikel anlegen" data="new_article" />
<menu label="Artikel bearbeiten" data="edit_article" />
<menu label="Verpackung">
<menu label="Verpackung anlegen" data="new_package" />
<menu label="Verpackung bearbeiten" data="edit_package"
/>
</menu>
<menu label="Materialgruppe">
<menu label="Materialgruppe anlegen"
data="new_materialgroup" />
<menu label="Materialgruppe bearbeiten"
data="edit_materialgroup" />
</menu>
</menu>
</Menuebar>
It is a well-formed XML.
2. Delete a component out of storage
We have some own components (basically forms), which will be
created and shown by an construct e.g.
var myComponent : T_Component = new T_Component ;
this.addChild(myComponent)
Some of our forms will be created in an popup. On every call
of the popup, we lost 5 mb or more, all childs on the windows will
be removed by formname.removeAllChild();
What cann we do, that the garbage collector will dispose this
objects.
Is there a way to show all objects with references (NOT
NULL)?
I have read in the Flex Help, that
this.removeChild(myComponent) not delete the form and/or object out
of the storage.
Rather the object must be destroyed.
It is sufficient to call delete(myComponent) about remove
this object out of the storage as the case may be that the
garbage-collector remove this object at any time?
Or how can I destroy a component correctly. What happens with
the widgets on this component e.g. input fields or datagrids?
Are they also being deleted?
Thanks for your help.
MatzeIf you mena the "photo Library" then you cannot delete it.
This is how iphone handles photos. There are not two copies. There a re simply two places from which to access the same photos. ALL photos synced to iphone can be accessed via Photo Library. Those same pics can be accessed via their individual folder. -
Driver missing - PCIe Data Acquisition and Signal .....
Hello, i recently used Boot Camp to install Windows XP on my 2010 15" Macbook Pro.
All the drivers are working (so far) and i haven't encountered many problems.
However, there is one thing bugging me:
When i go into Device Manager in Windows, and look down the list of installed/uninstalled devices, there is a device called "PCIe Data Acquisition and Signal Processing Controller" which has no driver installed.
I'm PC savvy, but i have never seen this before. My guess is that one of the motherboard drivers is missing, and Boot Camp installer doesn't include that driver?
Has anyone seen/resolved this, and if so, how?
Thanks.
Kaj.Okay, will do.
Thanks.
Also i wonder if you could help with another problem?
http://discussions.apple.com/thread.jspa?threadID=2758766&tstart=0 -
E5-571 PCI Data Acquisition and Signal Processing Controller & SM Bus Controller
I upgraded from Windows 8.1 to Windows 10. Windows Update says that it is up-to-date. Windows Devices Manager shows a problem with two devices: PCI Data Acquisition and Signal Processing ControllerSM Bus Controller What are these devices and where do I locate the drivers for them?
That should do it. I've been pleasantly surprised by how well older drivers are working in Windows 10. I had to install Vista 64bit drivers for an ATI video card (the latest working drivers for the card) and they actually worked!
Maybe you are looking for
-
HT201274 every time i open an app it says to connect to itunes to use push notifications
Anytime I open an app, it always tells me to "Connect to itunes to use push notifications." How do I fix that. Also, when i open youtube, it tells me i cannot connect to youtube.
-
HT2506 Preview always opens with full screen. Can I change this preference?
Is there an option to have Preview NOT open each image in full screen mode?
-
Problems moving from 1.3.1 to 1.4 (StreamCorruptedException)
Hi all, I'm having a terrible time moving my existing project from 1.3 to 1.4. The GUI (running on W2k) works fine, but the server side of the app (running on Solaris 2.6 w/ current patches & Java(TM) 2 Runtime Environment, Standard Edition (build 1.
-
Hi, Is there a reason why some command doesn't work anymore ? Like : <uitext name="LOGOCLICKURL" value="http://www.mycompanyname.com"/> or <uifont name="FONT_OUTLINE" value="Verdana,11,false,false,true"/> Thanks, Caroline
-
W540 ftp download = 4+ hours by DSL
Any way to know if the d/l is still happening when the computer blanks out the screen as per the power saving options? The only way right now that I can know what is happening, is to activate the computer, log on, maximize the d/loader, then see if t