Problem with develop module

I have LR 5.4 running on a mac OS 10.7.5. I am having problems with the software locking up in the Develop module. Sometimes a new image won't open and the preview screen stays black. I go back to the Library module and try to reneter the Develop module and get an error message saying there was an error trying to open the module. The entire LR screen is gray. I have to quit LR and restart the software to continue. I downloaded my software from Abobe and I was wondering if I can download a new version again and use my same serial number to reinstall the software.

Hi Rodney,
No custom print templates and this is a relatively new problem. It just
started about a week ago. I have been using the software steady for months
now. It did it once or twice last week but this weekend and today it has done
it about six times so it seems the problem is getting worse. That¹s why I
think the software may have been corrupted. I didn¹t keep a copy of the
software I downloaded so I can¹t reinstall. That¹s why I was wondering if I
could download it again and use the same serial number as before. I have only
loaded the latest version on my desktop. I also have LR 4 still installed on
my laptop and desktop. I have a big project to complete and this is really
slowing me down.
Michael
Problem with develop module
created by Andrew Rodney <https://forums.adobe.com/people/thedigitaldog> in
Photoshop Lightroom - View the full discussion
<https://forums.adobe.com/message/6445126#6445126>
Do you have any custom print templates? That might be the case, it was an
issue at one time. Delete them and try using one of the default presets.
Crash?
Please note that the Adobe Forums do not accept email attachments. If you want
to embed a screen image in your message please visit the thread in the forum
to embed the image at https://forums.adobe.com/message/6445126#6445126 Replies
to this message go to everyone subscribed to this thread, not directly to the
person who posted the message. To post a reply, either reply to this email or
visit the message page: To
unsubscribe from this thread, please visit the message page at
. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Photoshop Lightroom by email
<mailto:[email protected]> or
at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
&container=3316> For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
>

Similar Messages

Having problem with develop module

When I take a pic from library to develop module, I get the "loading" message but then it doesn't go off (and doesn't load); this is a new problem; hasn't happened before; I don't know if recent loading of 2.6 version caused a problem. Thanks for any insight.

Is there anyone that can help? This is frustrating to say the least. The edits are taking effect, but only showing on the filmstrip. If I go back to library the edits are there, and will then show in develop when I take it back again. This makes it just about impossible to apply anything like cloning, or minute edits, because I can't see them when they happen!!

Hello i was editing in lightroom and all of a sudden it pops up with " Develop module is disabled, please renew your membership" how do i fix this?

Hello i was editing in lightroom and all of a sudden it pops up with "Develop module is disabled, please renew your membership" How do i do this???

Please look at the links to the right of the page under "MORE LIKE THIS".

Specific Problem with Library Module 1:1 Preview Loading

Hi everyone. I've spent hours searching Google & forums for specific tips to try but I've found nothing that solved my problem. I have a very specific problem loading 1:1 previews in Lightroom 3.3 while zoomed to 1:1.
When I initially import a shoot (usually 3000 to 6000 images), I always render 1:1 previews during import. My understanding is that this activity writes full-sized previews to the "Previews" folder, but I also have observed that .DAT files are created in the "Camera Raw Cache" folder. I have my Lightroom Previews folder and my Adobe Camera Raw Cache folder on the **same** solid-state hard disk, which is dedicated to Lightroom.
When I browse these newly-imported images in the Library module in Loupe view at 1:1 zoom, it's very zippy and fast to switch between images. The images load without any message at a lower resolution, and then "snap" to full resolution after 0.25 to 0.5 seconds. No "Loading" message appears.
However, once the previews have "sat around for a while", even if they are still supposedly available in the Previews folder, loading the image at 1:1 in Loupe as described takes 3-5 seconds. Shortly after going to an image, the message "Loading..." is displayed (it doesn't say where from), and 3-5 seconds later, the full res image appears.
This has nothing to do with changes to image settings requiring re-rendering of the preview. These are images that I've imported but haven't browsed in a while. I know that the previews are valid, because I can go to "Library > Previews > Render 1:1 Previews", and the task will complete within 20 or 30 seconds without re-rendering any photos after examining them and apparently finding that there are still valid 1:1 previews for all 4000 of them. After doing this "re-render," the slow loading behavior is the same as before, because the re-render process always completes without actually updating the previews that it found are already there and presumably decided were still valid. Discarding previews by "Library > Previews > Discard 1:1 Previews" and then trying to re-render them also does nothing, because LR3 apparently doesn't immediately delete the discarded previews, so they are picked back up again As-Is by the re-rendering process.
If I had to guess at the reason for this behavior based on the symptoms, I would say that it seems like Lightroom is forcing itself to re-render 1:1 previews upon browsing to images that are older than a certain age (very possibly the same "30 days" after which the 1:1 previews are supposed to be discarded).
Now, I've also observed that deleting the DAT files in the Camera Raw Cache folder has no adverse impact on load speed (which is what I would have expected to see if LR3 was looking for and loading images from this cache instead of the Previews folder).
What this means to me is that once the image previews reach this "outdated" state, I can't get fast 1:1 browsing performance in Loupe with any reliable procedure other than manually deleting [in Windows Explorer] the entire Preview folder and then re-rendering the 1:1 previews for this shoot. This is of course terribly inconvenient when there are recent previews that I want to save.
Note: I do not have any slowness under any circumstance when browsing at "Zoom to Fit". This is only a problem when I'm browsing at 1:1 zoom (like when I'm comparing sharpness between a set of photos).
Note: For images with the slow behavior described, once the image has been loaded once at 1:1 zoom, it's henceforth snappy again when returning to the image (as if Lightroom was once again accepting the Preview file as valid).
So, here's a summary:
Previews (X:\Lightroom Catalog Previews\) and Camera Raw Cache (X:\Lightroom Cache\) are on same, dedicated, fast drive
1:1 previews from recently-imported files load full-res at 1:1 zoom in less than 1/2 second.
Older 1:1 previews take 3-5 seconds to load full-res at 1:1 zoom, even though the previews are supposedly being loaded from still-valid 1:1 previews in the Previews folder.
I'm really tired, so i hope this makes sense. I don't see how this could be a hardware problem, because I get good performance with recently-imported images. I'm running LR3.3 on Win 7 Pro x64 with 8 GB of RAM and a 2.4 GHz Intel Core2 Quad CPU. Never had LR3 beta installed - upgraded to 3.0 from the last 2.X version. After upgrading, in response to this exact issue, I deleted my entire previews folder and rebuilt, but I continue to have the exact same problem on every shoot that I import. It's most noticeable on the large shoots, because I end up having to browse at 1:1 zoom to compare a set of similar images.
Only workaround I've found: in Windows Explorer, manually delete the Previews folder. Return to Lightroom and rebuild 1:1 previews. This forces the previews to be rebuilt for all images.
Another possible workaround I am going to experiment with: setting the Previews to "Do Not Discard", in case the defualt "Discard after 30 days" that I've used is causing or contributing to the problem. If Lightroom is actually discarding the images after 30 days but forgetting that it had discarded them when asked to re-render 1:1's, maybe setting to "Do not discard" will bandage that problem by never discarding them to begin with.
All right, I'm falling asleep at the keyboard. I'm afraid to add more details as they may become incoherent. Hope to hear some good news, as fixing this problem would make my LR3 experience so much more pleasant.
Can anyone assist with this problem?
- Tyson

function(){return A.apply(null,[this].concat($A(arguments)))}
Ian Lyons wrote:
The behaviour after previews have been around for a while (i.e. previews for unedited images) is not normal. There have been a few other reports of similar behaviour, but no real clues as to why it happens.
Yes - this is my problem. Previews should still be valid, and "Library > Previews > Render 1:1 Previews" says the images are still valid, but then Loupe rebuilds them anyways.
function(){return A.apply(null,[this].concat($A(arguments)))}
Ian Lyons wrote:
If everything was working correctly, the setting for discard shouldn't have any effect on whether the previews go stale or not. ...
My understanding is that if everything were working as intended, the "setting for discard" that I was referring to (Edit > Catalog Settings > File Handling > "Automatically Discard 1:1 Previews") should be the sole determinant of whether 1:1 previews must be rebuilt for images with unmodified settings.
For example, if I import an image and render a 1:1 preview, and if I set the "Auto Discard 1:1" setting to "30 Days", and if I make no changes to the image's settings, then I would expect that the image should render quickly (under 1/2 second) at 1:1 zoom in Loupe view for the next 30 days. On the 31st day, I would expect the image to take longer to load as a new 1:1 preview was rendered and stored, and then I would expect this new preview to be retained for another 30 days.
I would furthermore expect that the 30-day counter would be reset every time the image was re-rendered (i.e. if I go into Develop and change something).
To a certain extent, this is functioning correctly on my system. When I go to one of these "problem images" that inexplicably load slowly, returning to them subsequently is quick. I think my problem is just, as Rob suggested, that some part of Lightroom's "brain" has wacky ideas about whether an up-to-date 1:1 preview exists or not.
If I choose to "Never" automatically discard 1:1 previews (which is what I just switched to), then I should "Never" see unmodified images taking 3-5 seconds to "Load" at 1:1 zoom in Loupe.
Since I just nuked my Previews folder again last night and re-rendered 1:1's overnight for a 3000 image shoot, it might be a while before I start encountering this bug again. I will certainly post any further related experiences here and will keep checking for anyone who has further insight.
function(){return A.apply(null,[this].concat($A(arguments)))}
Ian Lyons wrote:
...we know that Lr3.4 RC fixed the manual discard bug, so, if I were you I would focus any further tests on Lr3.4RC.
Thanks for pointing this out. I will upgrade to 3.4RC - at least then I will be able to force a rebuild of previews from one shoot without having to manually delete the previews for my entire catalog. I'll no longer have to throw out all the food in the refrigerator just because something smells funny.
function(){return A.apply(null,[this].concat($A(arguments)))}
Ian Lyons wrote:
The DAT files are created at the same time as Library previews. However, they are only used in Develop module.
Yes, I definitely agree with this (although, the Cache is probably also used while rendering new previews after "Quick Develop" changes in the Library module....). I posted my observations to this effect just in case someone else wondered the same thing I did. It is clear that the DAT files get written every time a preview is rendered for RAW file. Rob, now that I'm thinking with a clearer mind, I think the only thing these Cached files are used for is if you "return" to recently rendered settings in Develop or Quick Develop - then, that particular combination of settings yields a match in the cache, and LR loads the image from the Cache into Previews and onto the screen. It is logical that the cache wouldn't help us when going to new settings, because the new settings would create a partially or completely different rendering than any other combination of settings. Adobe may be going to more advanced levels of "reusability" than this, but I'm sure this is the general state of things.
You may want to open back up write access to that Cache folder...
Thanks, Rob & Ian!
So, my question, or bug report, still remains for now - why am I biting into a bag of chips marked "Fresh" and finding them Stale? And why does it say "Paper Jam" when there is no paper jam?

Color label setting problems in Develop module

Today is the first day with Lightroom 3, where I have over 200 photos from an event, that I am walking through each photo. I am in the develop module and I am setting the color label to red or blue. What seems to be constantly (not every time) happening is when I click the color for the label, LR will move to the next photo, but not apply the color label.
As I write this I'm trying it out to notice a pattern. What I see is photo 1, I click on the red label and the photo is labeled red and LR moves to photo 2. I click on the red label and LR does not set any color label and moves to photo 3.
Another thing that happened is I was then at photo 3 and clicked on the blue label. LR did not set the blue label but jumped to photo 4 and put the blue label on that photo.
This is very annoying.
Where might I report this bug to Adobe?

Same bug as with ratings. http://forums.adobe.com/thread/679696?tstart=0
Flagging via the toolbar, also shows this problem.
As noted above, use keyboard shortcuts.

Problem with Fabric Module 2 in Nexus 7010

Hi, I’ve got this problem with my N7K and 2 of the fabric module’s. The front LED of the N7K is yellow/orange instead of green (it’s supposed to be green I believe). Not sure what this relates to, hw issue, config issue or?
As you can see below, 2 of the fabric module are powered down. Restarting the fab’s og restarting the N7K does not power up the fab module’s.
VDC-ADMIN# sh module
Mod Ports Module-Type                         Model              Status
4    12     10/40 Gbps Ethernet Module          N7K-F312FQ-25      ok
5    0      Supervisor Module-2                 N7K-SUP2E          active *
6    0      Supervisor Module-2                 N7K-SUP2E          ha-standby
7    12     10/40 Gbps Ethernet Module          N7K-F312FQ-25      ok
10   4      Network Analysis Module NAM-NX1     N7K-SM-NAM-K9      ok
Mod Sw              Hw
4    6.2(6a)         1.0
5    6.2(6a)         6.0
6    6.2(6a)         6.0
7    6.2(6a)         1.0
10   6.2(6a)         1.0
Mod      Application Image Description    Application Image Version   Status
10       Application linecard image       6.0(1)                      ok
Mod MAC-Address(es)                         Serial-Num
4    28-34-a2-ab-e1-dc to 28-34-a2-ab-e2-17 JAE181002NA
5    e4-c7-22-10-2f-4f to e4-c7-22-10-2f-61 JAF1748AFJR
6    e4-c7-22-0f-dd-13 to e4-c7-22-0f-dd-25 JAF1748AFKG
7    54-4a-00-ac-09-d8 to 54-4a-00-ac-0a-13 JAE181002PX
10   e4-c7-22-0f-95-e6 to e4-c7-22-0f-95-ef JAF1801AABH
Mod Online Diag Status
4    Pass
5    Pass
6    Pass
7    Pass
10   Pass
Xbar Ports Module-Type                         Model              Status
1    0      Fabric Module 2                     N7K-C7010-FAB-2    ok
2    0      Fabric Module 2                     N7K-C7010-FAB-2    ok
3    0      Fabric Module 2                     N7K-C7010-FAB-2    ok
4    0      Fabric Module 2                     N7K-C7010-FAB-2    powered-dn
5    0      Fabric Module 2                     N7K-C7010-FAB-2    powered-dn
Xbar Power-Status Reason
4    powered-dn     Reset (powered-down) because module does not boot
5    powered-dn     Reset (powered-down) because module does not boot
Xbar Sw              Hw
1    NA              1.5
2    NA              1.5
3    NA              1.5
Xbar MAC-Address(es)                         Serial-Num
1    NA                                      JAF1749AFAB
2    NA                                      JAF1749AFDF
3    NA                                      JAF1748AEQR
4    NA                                      JAF1746BEFB
5    NA                                      JAF1749AMCA
* this terminal session
VDC-ADMIN#

Well, not much info from that command.
VDC-ADMIN# sh environment power
Power Supply:
Voltage: 50 Volts
Power                              Actual        Total
Supply    Model                    Output     Capacity    Status
                                 (Watts )     (Watts )
1        N7K-AC-6.0KW               800 W       6000 W     Ok
2        N7K-AC-6.0KW               641 W       6000 W     Ok
3        ------------                 0 W          0 W     Absent
                                  Actual        Power
Module    Model                     Draw    Allocated    Status
                                 (Watts )     (Watts )
4        N7K-F312FQ-25              289 W        340 W    Powered-Up
5        N7K-SUP2E                  128 W        265 W    Powered-Up
6        N7K-SUP2E                  128 W        265 W    Powered-Up
7        N7K-F312FQ-25              281 W        340 W    Powered-Up
10       N7K-SM-NAM-K9              333 W        750 W    Powered-Up
Xb1      N7K-C7010-FAB-2             39 W         80 W    Powered-Up
Xb2      N7K-C7010-FAB-2             39 W         80 W    Powered-Up
Xb3      N7K-C7010-FAB-2             44 W         80 W    Powered-Up
Xb4      N7K-C7010-FAB-2            N/A           80 W    Powered-Dn
Xb5      N7K-C7010-FAB-2            N/A          80 W    Powered-Dn
fan1     N7K-C7010-FAN-S            198 W        720 W    Powered-Up
fan2     N7K-C7010-FAN-S            198 W        720 W    Powered-Up
fan3     N7K-C7010-FAN-F             14 W        120 W    Powered-Up
fan4     N7K-C7010-FAN-F             14 W        120 W    Powered-Up
N/A - Per module power not available
Power Usage Summary:
Power Supply redundancy mode (configured)                PS-Redundant
Power Supply redundancy mode (operational)               PS-Redundant
Total Power Capacity (based on configured mode)               6000 W
Total Power of all Inputs (cumulative)                       12000 W
Total Power Output (actual draw)                              1441 W
Total Power Allocated (budget)                                4040 W
Total Power Available for additional modules                  1960 W
VDC-ADMIN#

Problem with memory module

The problem with upgrade memory module.
Available:
Cisco 2951 router with the default memory module 512Mb.
Additionally purchased:
Memory Module MEM-2951-1GB (SG572288FG8P6ILMH4)
Problem Description:
When you start seeing a hardware router modules, after loading the ROMMON
reading failure IOS image
The first module is worth the default 512M, 1G second unit acquired
The permutation modules as well as single use module 1G situation has not changed.
Work whether the module supplier sold me?

It shouldn't cost you a fortune, John. I usually find Apple re-sellers very obliging on matters like this. Where did you buy your memory from? If it was Apple retail they may help and explain about the residue at the same time.
It's not unusual to meet difficulties with the fitting of memory but the residue is something I haven't met before.

Problem with viewing modules on iPhone / iPad

Hello. I have a problem with viewing my modules on iPhone and iPad. I have the same problem previously with Captivate 6, which I honestly thought that it is solved on Captivate 7, downloaded the trial version just to test it and I got nothing improved about that,
So, when I publish and upload my course on cloud.scorm.com I got this:
iPhone - It only shows the top left of slides and I get full voiceover
iPad - shows photo top left on last slide (not first?) and hangs with no voiceover
This is a simple 4 slide course which I use for testing the project.
If someone wants to test here is a link: http://cloud.scorm.com/sc//InvitationLaunch?userInvitationId=d75b27a6-e7df-41fa-87e6-d7576 48aea93
And I really expect some help with this, because it's really important not to have this type of problems.
Thanks.

"And I really expect some help with this..."
Please remember that this is a user forum, not Adobe Support. If you've paid some money for something and it's not working as you expect, you certainly have the right to require the manufacturer to provide after sales support.
But you would not track down another purchaser of the same product and tell them they owe you support...would you?

Windows 98 resource & memory problems with Developer/2k v2.1

Hi All
I have just started developing with Developer/2000 v2.1 on
Oracle v7.3. I recently purchased a Dell Inspiron 3500 notebook
PC running Windows 98 (64M RAM, 4.3G HD). I have had continuous
problems with the system running out of system resources and/or
memory.
The problem seems to be with both the development and runtime
programs. If I run the Form Builder and then exit it, the system
information program reports that the F50DES32.EXE is still
running, plus there are a load of 32-bit driver files left in
memory. The same problem occurs with the runtime, in that once
it's loaded, even after taking the exit option, the F50RUN32.EXE
is left running in memory. This would not be so bad if
subsequent loads of either program recognised that the program
was already running, but they do not so you end up with multiple
copies of the programs running. At the moment, with regular
changes, recompiles and reloads of the runtime going on, I have
to reboot the PC on average about once every 30 minutes.
I cannot find anything on either the Microsoft or Oracle web
sites about this problem, and really I'm not sure who's to
blame. I guess development on Windows 98 is still pretty young.
However, this seems to be a fairly serious problem and is
certainly having a major impact on productivity!
Am I missing something in terms of Oracle parameter settings or
in the way Windows 98 is set up? Has anybody out there had
similar problems? Can anybody help??
Thanks
Billy
null

I also observed something like this- but it was a programming error. I was using ADODB in LabVIEW to run SELECT statements and retrieve data from recordsets. My program would gradually consume more and more RAM over time. This was plainly visible on NTs Task Manager. My problem was that I was simply forgetting to close/destroy many of the object references. This would also sometimes cause my system to crash when I stopped the program and exited LabVIEW (or exited the run-time engine if it was an exe).
I might suggest you go through the program and make sure you use the Automation Close function to close the appropriate references.
Its especially important to close all "Fields" and "Field" references.
Also, I found that running the GET ROWS method or GE
T STRING method on a recordset works much better than retrieving data using "Fields" and "Field" objects... its faster, easier, less prone to causing problems, less trouble with references and stuff.

MiniSAP - Problems with developer key

Hi @all,
today, I started installing the Minisap System on my PC. (SAP NetWeaver Sneak Preview on MaxDB).
After the installation I logged on to the System with the User "BCUSER".
I started t-code "SE38" to start developing some ABAP programms.
Now, I have to insert a valid developer key, which I can - according to the Installation Guide - find on<a href="http://www.sap.com/technology/minisap">http://www.sap.com/technology/minisap</a>.
The key I found there is: 29671482393151224771
So I entered this key in the field, but my System said, it was an invalid key.
Can anyone help me with this problem?
I checked many potential nonconformities, but had no success:
- I definitly inserted the correct key found on the website, because I used the copy and paste function.
- I restarted both the instance and after that the whole pc.
- I installed a new valid 90-day license key from SAP
- My SID is definitly "NSP", Installation-Number: "DEMOSYSTEM"
Does anyone has an Idea, how I can resolve this problem? Is there another developer key available for the NSP WebAS 6.40 System?
Thank you for answering
Best regards
Ralf

Thank you,
I tried to solve my problem on the way you said, but again, the error message "invalid key" appeared.
Is it possible, that there is a general problem with my installation?
Is there anyone else with the same problem?
Regards
Ralf

Problem with developer

Hi all
Im having a problem with my instalation od SQL developer, i initialy installed and set it up and was able to create and run packages.
the dba then changed ny permissions to allow greater access to more data and mow i get an error when trying to access packages and procedures the error is as follows
table or view does not exist --- vendor code 942 please can you help

Ok, that's slightly different, that's about what you can see, depending on privileges. We have a few bugs on that and have now earmarked these for the next release.
The issue as I understood from the initial query, was that having had the privilege level changed you erroneously got this table or view does not exist for any procedures or packages.
Either way, bugs are logged and noted.
Sue

Problems with vmware module and Xorg

Hello everybody!
Today I wanted to install and setup Arch Linux on my computer into a VMware Virtual Machine, first steps were very nice and worked ok, but now I trying to install LXDE as a desktop I already installed xorg drivers and lxde this is my Xorg.0.log
http://pastebin.com/f8gwbdcb
[ 979.359] Current Operating System: Linux localhost 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 979.393] Initializing built-in extension MIT-SCREEN-SAVER
[ 979.411] (EE) Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: /usr/lib/xorg/modules/drivers/vmware_drv.so: file too short
[ 979.411] (EE) Failed to load module "vmware" (loader failed, 7)
[ 979.411] (EE) No drivers available.
[ 979.411] (EE)
[ 979.411] (EE) no screens found(EE)
[ 979.412] (EE)
[ 979.412] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 979.413] (EE)
If I want to see what's inside vmware_drv.so.... it's a empty file, all files under /usr/lib/xorg/modules/drivers are empty: `du *`
4 Desktop
0 /usr/lib/xorg/modules/drivers/ark_drv.so
0 /usr/lib/xorg/modules/drivers/ast_drv.so
0 /usr/lib/xorg/modules/drivers/ati_drv.so
0 /usr/lib/xorg/modules/drivers/cirrus_alpine.so
0 /usr/lib/xorg/modules/drivers/cirrus_drv.so
0 /usr/lib/xorg/modules/drivers/cirrus_laguna.so
0 /usr/lib/xorg/modules/drivers/dummy_drv.so
0 /usr/lib/xorg/modules/drivers/fbdev_drv.so
0 /usr/lib/xorg/modules/drivers/glint_drv.so
0 /usr/lib/xorg/modules/drivers/i128_drv.so
0 /usr/lib/xorg/modules/drivers/intel_drv.so
0 /usr/lib/xorg/modules/drivers/mach64_drv.so
0 /usr/lib/xorg/modules/drivers/mga_drv.so
0 /usr/lib/xorg/modules/drivers/modesetting_drv.so
0 /usr/lib/xorg/modules/drivers/neomagic_drv.so
0 /usr/lib/xorg/modules/drivers/nouveau_drv.so
0 /usr/lib/xorg/modules/drivers/nv_drv.so
0 /usr/lib/xorg/modules/drivers/openchrome_drv.so
0 /usr/lib/xorg/modules/drivers/r128_drv.so
0 /usr/lib/xorg/modules/drivers/radeon_drv.so
0 /usr/lib/xorg/modules/drivers/savage_drv.so
0 /usr/lib/xorg/modules/drivers/siliconmotion_drv.so
0 /usr/lib/xorg/modules/drivers/sis_drv.so
0 /usr/lib/xorg/modules/drivers/tdfx_drv.so
0 /usr/lib/xorg/modules/drivers/trident_drv.so
0 /usr/lib/xorg/modules/drivers/v4l_drv.so
0 /usr/lib/xorg/modules/drivers/vesa_drv.so
0 /usr/lib/xorg/modules/drivers/vmware_drv.so
0 /usr/lib/xorg/modules/drivers/voodoo_drv.so
Arch linux looks really nice, clear and simple I want to go on playing with this distro but I have problems with this issue .
Thanks!

Hello everybody!
Today I wanted to install and setup Arch Linux on my computer into a VMware Virtual Machine, first steps were very nice and worked ok, but now I trying to install LXDE as a desktop I already installed xorg drivers and lxde this is my Xorg.0.log
http://pastebin.com/f8gwbdcb
[ 979.359] Current Operating System: Linux localhost 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 979.393] Initializing built-in extension MIT-SCREEN-SAVER
[ 979.411] (EE) Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: /usr/lib/xorg/modules/drivers/vmware_drv.so: file too short
[ 979.411] (EE) Failed to load module "vmware" (loader failed, 7)
[ 979.411] (EE) No drivers available.
[ 979.411] (EE)
[ 979.411] (EE) no screens found(EE)
[ 979.412] (EE)
[ 979.412] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 979.413] (EE)
If I want to see what's inside vmware_drv.so.... it's a empty file, all files under /usr/lib/xorg/modules/drivers are empty: `du *`
4 Desktop
0 /usr/lib/xorg/modules/drivers/ark_drv.so
0 /usr/lib/xorg/modules/drivers/ast_drv.so
0 /usr/lib/xorg/modules/drivers/ati_drv.so
0 /usr/lib/xorg/modules/drivers/cirrus_alpine.so
0 /usr/lib/xorg/modules/drivers/cirrus_drv.so
0 /usr/lib/xorg/modules/drivers/cirrus_laguna.so
0 /usr/lib/xorg/modules/drivers/dummy_drv.so
0 /usr/lib/xorg/modules/drivers/fbdev_drv.so
0 /usr/lib/xorg/modules/drivers/glint_drv.so
0 /usr/lib/xorg/modules/drivers/i128_drv.so
0 /usr/lib/xorg/modules/drivers/intel_drv.so
0 /usr/lib/xorg/modules/drivers/mach64_drv.so
0 /usr/lib/xorg/modules/drivers/mga_drv.so
0 /usr/lib/xorg/modules/drivers/modesetting_drv.so
0 /usr/lib/xorg/modules/drivers/neomagic_drv.so
0 /usr/lib/xorg/modules/drivers/nouveau_drv.so
0 /usr/lib/xorg/modules/drivers/nv_drv.so
0 /usr/lib/xorg/modules/drivers/openchrome_drv.so
0 /usr/lib/xorg/modules/drivers/r128_drv.so
0 /usr/lib/xorg/modules/drivers/radeon_drv.so
0 /usr/lib/xorg/modules/drivers/savage_drv.so
0 /usr/lib/xorg/modules/drivers/siliconmotion_drv.so
0 /usr/lib/xorg/modules/drivers/sis_drv.so
0 /usr/lib/xorg/modules/drivers/tdfx_drv.so
0 /usr/lib/xorg/modules/drivers/trident_drv.so
0 /usr/lib/xorg/modules/drivers/v4l_drv.so
0 /usr/lib/xorg/modules/drivers/vesa_drv.so
0 /usr/lib/xorg/modules/drivers/vmware_drv.so
0 /usr/lib/xorg/modules/drivers/voodoo_drv.so
Arch linux looks really nice, clear and simple I want to go on playing with this distro but I have problems with this issue .
Thanks!

Editing a book image with Develop module on second screen

How would I edit a picture in the "Develop" Module while having the "Book" Module open? I have dual screens and would like to modify a pictures look and balance my pictures based on how the others look on the same page.
It is a very cumbersome process to switch between the two modules ("Develop" & "Book") when I could just use dual monitors.
Any ideas or solutions would be most helpful.
Thank you!

How would I edit a picture in the "Develop" Module while having the "Book" Module open? I have dual screens and would like to modify a pictures look and balance my pictures based on how the others look on the same page.
It is a very cumbersome process to switch between the two modules ("Develop" & "Book") when I could just use dual monitors.
Any ideas or solutions would be most helpful.
Thank you!

[Solved] Very strange problem with kernel-modules & NTFS write speed

I was getting very low copying speed when copying files to NTFS partitions, around 8-10 MB. But, when I commented the modules section in /etc/rc.conf file, the speed dramatically improved upto 5-6x. Now, it also created some problems for me. Like vboxdrv is required by Virtualbox to function & cpufreq_ondemand is required by my AMD processor. Please help me & tell what I'm doing wrong. I'm also posting the output of my /etc/rc.conf file here
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged.
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
# VERBOSE: Verbose level (from 1 to 8). man 3 syslog for level info
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="Asia/Kolkata"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
VERBOSE="3"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
#MOD_AUTOLOAD="yes"
#MODULES=(microcode powernow-k8 cpufreq_ondemand cpufreq_powersave vboxdrv vboxnetflt )
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="AX-64"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=192.168.1.2
netmask=255.255.255.0
gateway=192.168.1.1
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock @acpid syslog-ng network netfs dkms_autoinstaller sshd @crond @alsa dbus hal gdm @cpufreq @cpu)
Last edited by tarun.hellknight (2012-02-04 16:55:39)

Sorry for replying late.. Was very busy.. So, the thing is that I disabled every module & loaded only microcode & powernow-k8 in /etc/rc.local. Now, I'm getting good speed while copying data but the problem is that the processor is running & full speed i.e. 3.0 GHz. I checked it via cat /proc/cpuinfo. Also, there is a message in the bootime, that i'm posting here..
grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory
If it helps, here's the output of cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 5
model name : AMD Athlon(tm) II X4 640 Processor
stepping : 3
microcode : 0x10000b6
cpu MHz : 3000.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
bogomips : 6002.74
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
Last edited by tarun.hellknight (2012-02-01 18:49:55)

Video Playback Problem with Developer Walkthrough of the Continuous Measurement and Logging Sample Project

Hi!
I have serious problems playing the video Developer Walkthrough of the Continuous Measurement and Logging Sample Project.
As the video pauses every few seconds for buffering. I am not able to watch it. Just wanted to check if you can playback the video:
http://zone.ni.com/wv/app/doc/p/id/wv-3401
This happens on any browser (chrome, ie, firefox). I am using Win XP and the latest Adobe Flash Player. About 2 weeks ago NI Germany confirmed the problem and promised to contact NI USA as they are responsible for these videos. So far nothing happened. In the meantime I received an e-mail that the problem could not be confirmed although they had confirmed it before...
Thank you for any feedback.
Regards,
Anguel

Hello ctVolFan,
As indicated in the "support" section of the SPOT, you should get in touch with self-paced-training(at)ni(dot)com. I don't believe that team monitors these forums directly.
Regards,
Tom L.

Problem with develop module

Similar Messages

Maybe you are looking for