Problem with memory module

The problem with upgrade memory module.
Available:
  Cisco 2951 router with the default memory module 512Mb.
Additionally purchased:
  Memory Module MEM-2951-1GB (SG572288FG8P6ILMH4)
  Problem Description:
  When you start seeing a hardware router modules, after loading the ROMMON
  reading failure IOS image
  The first module is worth the default 512M, 1G second unit acquired
  The permutation modules as well as single use module 1G situation has not changed.
Work whether the module supplier sold me?

It shouldn't cost you a fortune, John.  I usually find Apple re-sellers very obliging on matters like this.  Where did you buy your memory from?   If it was Apple retail they may help and explain about the residue at the same time.
It's not unusual to meet difficulties with the fitting of memory but the residue is something I haven't met before.  

Similar Messages

  • Strange problems with memory dimms(Banks) in imac 27in mid2010

    Hello dear Apple community. I had a really strange problem with memory dimms(modules anyway)
    I have one really good imac 27in with i7 but as you know after some years the lcd screen became yellowish and cloudy
    So i decided to clean it as i have some knowledge and i did that to others lcd screens with success.
    OK so after successfully cleaning and working like new ( i mean not the external screen with magnets but the lcd internally)i started it.
    Before dismantling my memory was 16gb ( 4x4 dimms)
    After starting it a strange problem arise without any reason! Memory reduced TO 8 GB!!!! memory banks on the right as we seeing it didnt worked at all
    and it was not from dimms because i swapped them..!!!
    So after a lot of thinking and asking tech guys to take a second opinion all the saying (including me that logic board failed for some strange reason.
    Some days before i installed CCleaner and also Onyx because after a lot of installations and uninstallations my mac became a little sluggish..
    I thought that some serious preferences files removed or some hardware settings deleted with Onyx ( is very good and powerful program that can fix the pc and also destroy it in a second) so i removed and reset all preferences. But nothing changed.. So i put a new hard drive and reinstall OXS to see if something can change.
    After formating HD to appleHFS+ saw system profiler that still couldn't see all banks(16gb). I remove logic board and i put another processor i7 that i have as a back up and still nothing( some saying that only these 2 things must be faulty if memory banks not working , processor an logic board and sometimes reinsatlling OS can fix it as i mentioned before. But still nothing...
    So from my nerves and after so much testings and no sleeping for 2 days as it was working i pulled off the memory modules from the right bank i put them again ( off course nothing changed) and i close it. After i restarted it like a miracle finally i saw that i have again 16gb in system profiler!!
    Tech guys here please give me an explanation to this because i gooing crazy! What happened and after i pulled off the dimms while it was working the problem fixed?? It is not recomended at all this action. I forgot to mention that i did Apple hardware test and nothing found..
    Sorry for long post.

    Okay great news...  My memory problems are solved and my Mac Mini is now running at 8 gigs of Ram. I tried the suggested DD3 1333 which  the computer wouldn't even recognize.
    So after visiting the Apple Store in the Fair Oaks VA shopping mall; they suggested that I try DDR3 8500 ram.    I visited Micro Center in Vienna VA, and I purchased BGreg's Suggested Crucial Brand Ram.  10 minutes after I got home the Mac Mini booted on the 1st try with 8 gigs of Ram.
    Some venting that Apple hopefully will read and mention to their resellers....
    The people in the Apple section of MicroCenter in Vienna at first argued that the Mac Mini only supports 4 gigs. EVEN AFTER I SHOWED THEM THE SPECS on the Apple website.  The clerk (who I am calling a clerk because by no means was he a "specialist") even suggested that the Apple site was wrong.  On a later visit to MicroCenter to purchase the DDR3 8500, that the people at Apple recomended; Microcenter even suggested and argued that I needed DDR3 1333 and NOT DD3 8500.  THIS WAS AFTER I TOLD THEM THAT Mac Mini WOULD NOT RECOGNIZE the DD3 1333 Dimms.   Working in retail myself I don't go along with the concept that the customer is always right, however in this instance clearly I was.
    I should point out that some of the staff in Microcenter really do try hard, however like with any business it only takes a few "know it all" bad examples to turn customers off.
    Curious post thought; I wasted about $75 in gas driving to and from Microcenter because of their bad advice. 

  • Problems with Memory on upgrading

    Problems with Memory. I Dide not hace space to upgrade. Now i do, but It still cancels for lack of space

    Actually, your problem does not sound like memory, but hard drive space. By default, you lose 10% of your drive to the OS and formatting. To tell how much hard drive space you have go to:
    >Finder
    >At the bottom of finder in the gray bar it will tell you how much space you have available on your hard drive.
    Your hard drive should be no more than 85% full! If it is, delete, get a larger hard drive, remove items to an external drive.
    GarageBand only needs 1.2 MB of space.
    In order to use GarageBand, some additional content is required. If you do not already have the content installed, it must be downloaded.
    Make more disk space available by moving some of your files to a different disk (such as an external hard disk or a USB flash drive), or by deleting files you don't need and then emptying the Trash

  • Problem with develop module

    I have LR 5.4 running on a mac OS 10.7.5. I am having problems with the software locking up in the Develop module. Sometimes a new image won't open and the preview screen stays black. I go back to the Library module and try to reneter the Develop module and get an error message saying there was an error trying to open the module. The entire LR screen is gray. I have to quit LR and restart the software to continue. I downloaded my software from Abobe and I was wondering if I can download a new version again and use my same serial number to reinstall the software.

    Hi Rodney,
    No custom print templates and this is a relatively new problem. It just
    started about a week ago. I have been using the software steady for months
    now. It did it once or twice last week but this weekend and today it has done
    it about six times so it seems the problem is getting worse. That¹s why I
    think the software may have been corrupted. I didn¹t keep a copy of the
    software I downloaded so I can¹t reinstall. That¹s why I was wondering if I
    could download it again and use the same serial number as before. I have only
    loaded the latest version on my desktop. I also have LR 4 still installed on
    my laptop and desktop. I have a big project to complete and this is really
    slowing me down.
    Michael
    Problem with develop module
    created by Andrew Rodney <https://forums.adobe.com/people/thedigitaldog>  in
    Photoshop Lightroom - View the full discussion
    <https://forums.adobe.com/message/6445126#6445126>
    Do you have any custom print templates? That might be the case, it was an
    issue at one time. Delete them and try using one of the default presets.
    Crash?
    Please note that the Adobe Forums do not accept email attachments. If you want
    to embed a screen image in your message please visit the thread in the forum
    to embed the image at https://forums.adobe.com/message/6445126#6445126 Replies
    to this message go to everyone subscribed to this thread, not directly to the
    person who posted the message. To post a reply, either reply to this email or
    visit the message page:  To
    unsubscribe from this thread, please visit the message page at
    . In the Actions box on the
    right, click the Stop Email Notifications link. Start a new discussion in
    Photoshop Lightroom by email
    <mailto:[email protected]>  or
    at Adobe Community
    <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
    &container=3316>  For more information about maintaining your forum email
    notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
    >

  • Problem with memory in k7t turbo limited ed.

    serious problem!! i've got mainbord k7t turbo limited edition with vhipset via vt82c686b. untill now i had one 128 MB memory installed. I want to extend my memory but when i insert another memory to another slot computer does not start... (led status i all red!) no metter to with slot i insert new memory (its the right pc133 memory type) and no matter if it's 128 or 256 MB. Witho only one slot used it work properly even with 256 MB. Problem occurs only with 2 or more slots sed... this memory works with no problems in other computer (different mainboard)
    PLEASE HELP!!!!
    thanks in advance

    Most times is due to incompatibility between memory modules. Best way to avoid it is to buy 2 modules same brand, or one bigger module.

  • MSI 645Ultra and problem with memory.

    Hello.
    I have big problem with my mobo. I can't run 645Ultra mobo (MSI 6547) with other memory than installed actually. Now I have Samsung DDR333 128MB (one-sided), and everything works well. But I tried to install another modules (2 pieces - 256MB DDR266 double-sided). After install one of those modules, my comp doesn't start. Mobo only beeps and there has no signal on my monitor. With installed two modules - my memory (ddr333) and one of those 256MB ddr266, computer runs, but POST shows me only 128MB :(.
    What is going on? Does this mobo supports memory other than ddr333 (user manual says - YES, but now I'm not sure).

    "645 ultra" DDR Brands  tested with this board
    http://www.msi.com.tw/html/support/testreport/6547/memory.htm
    ddr 333 what brand :O
    ddr 266 what brand :O
    DDR 266 aka 2100 Cant run at 333 aka 2700 ;(  

  • Problem with memory usage and CPU usage

    Hello,
    i have a problem with the memory usage and cpu usage in my project!
    My application must run for more than 24 hrs. The problem is that the longer it runs the bigger is the memory and cpu usage!
    It starts with ~15% CPU usage and ~70 MBytes memory usage. After ~ 24hrs the CPU usage is ~60% and the memory usage is ~170 MBytes!
    After  3 days the CPU usage is almost about 70% and the memory usage is about 360 MBytes!
    What can I do to reduce this huge recource usage?
    Thank you!

    Hi Pahe,
       I think the issue is memory usage, since CPU usage can increase due to greater memory requirements.
       Anyway, it's difficult to debug without seeing your code, can you post it (possibly for LV 7.1 compatibility)?  Or just post a JPEG of the piece of code that can give problems...
       I guess you're appending data to an array instead of replace data elements, but I can't be sure...
       Have a nice day!
    graziano

  • Problem with Fabric Module 2 in Nexus 7010

    Hi, I’ve got this problem with my N7K and 2 of the fabric module’s.  The front LED of the N7K is yellow/orange instead of green (it’s supposed to be green I believe).  Not sure what this relates to, hw issue, config issue or?
    As you can see below, 2 of the fabric module are powered down.  Restarting the fab’s og restarting the N7K does not power up the fab module’s.
    VDC-ADMIN# sh module
    Mod  Ports  Module-Type                         Model              Status
    4    12     10/40 Gbps Ethernet Module          N7K-F312FQ-25      ok
    5    0      Supervisor Module-2                 N7K-SUP2E          active *
    6    0      Supervisor Module-2                 N7K-SUP2E          ha-standby
    7    12     10/40 Gbps Ethernet Module          N7K-F312FQ-25      ok
    10   4      Network Analysis Module NAM-NX1     N7K-SM-NAM-K9      ok
    Mod  Sw              Hw
    4    6.2(6a)         1.0
    5    6.2(6a)         6.0
    6    6.2(6a)         6.0
    7    6.2(6a)         1.0
    10   6.2(6a)         1.0
    Mod      Application Image Description    Application Image Version   Status
    10       Application linecard image       6.0(1)                      ok
    Mod  MAC-Address(es)                         Serial-Num
    4    28-34-a2-ab-e1-dc to 28-34-a2-ab-e2-17  JAE181002NA
    5    e4-c7-22-10-2f-4f to e4-c7-22-10-2f-61  JAF1748AFJR
    6    e4-c7-22-0f-dd-13 to e4-c7-22-0f-dd-25  JAF1748AFKG
    7    54-4a-00-ac-09-d8 to 54-4a-00-ac-0a-13  JAE181002PX
    10   e4-c7-22-0f-95-e6 to e4-c7-22-0f-95-ef  JAF1801AABH
    Mod  Online Diag Status
    4    Pass
    5    Pass
    6    Pass
    7    Pass
    10   Pass
    Xbar Ports  Module-Type                         Model              Status
    1    0      Fabric Module 2                     N7K-C7010-FAB-2    ok
    2    0      Fabric Module 2                     N7K-C7010-FAB-2    ok
    3    0      Fabric Module 2                     N7K-C7010-FAB-2    ok
    4    0      Fabric Module 2                     N7K-C7010-FAB-2    powered-dn
    5    0      Fabric Module 2                     N7K-C7010-FAB-2    powered-dn
    Xbar Power-Status  Reason
    4    powered-dn     Reset (powered-down) because module does not boot
    5    powered-dn     Reset (powered-down) because module does not boot
    Xbar Sw              Hw
    1    NA              1.5
    2    NA              1.5
    3    NA              1.5
    Xbar MAC-Address(es)                         Serial-Num
    1    NA                                      JAF1749AFAB
    2    NA                                      JAF1749AFDF
    3    NA                                      JAF1748AEQR
    4    NA                                      JAF1746BEFB
    5    NA                                      JAF1749AMCA
    * this terminal session
    VDC-ADMIN#

    Well, not much info from that command.  
    VDC-ADMIN# sh environment power
    Power Supply:
    Voltage: 50 Volts
    Power                              Actual        Total
    Supply    Model                    Output     Capacity    Status
                                     (Watts )     (Watts )
    1        N7K-AC-6.0KW               800 W       6000 W     Ok
    2        N7K-AC-6.0KW               641 W       6000 W     Ok
    3        ------------                 0 W          0 W     Absent
                                      Actual        Power
    Module    Model                     Draw    Allocated    Status
                                     (Watts )     (Watts )
    4        N7K-F312FQ-25              289 W        340 W    Powered-Up
    5        N7K-SUP2E                  128 W        265 W    Powered-Up
    6        N7K-SUP2E                  128 W        265 W    Powered-Up
    7        N7K-F312FQ-25              281 W        340 W    Powered-Up
    10       N7K-SM-NAM-K9              333 W        750 W    Powered-Up
    Xb1      N7K-C7010-FAB-2             39 W         80 W    Powered-Up
    Xb2      N7K-C7010-FAB-2             39 W         80 W    Powered-Up
    Xb3      N7K-C7010-FAB-2             44 W         80 W    Powered-Up
    Xb4      N7K-C7010-FAB-2            N/A           80 W    Powered-Dn
    Xb5      N7K-C7010-FAB-2            N/A           80 W    Powered-Dn
    fan1     N7K-C7010-FAN-S            198 W        720 W    Powered-Up
    fan2     N7K-C7010-FAN-S            198 W        720 W    Powered-Up
    fan3     N7K-C7010-FAN-F             14 W        120 W    Powered-Up
    fan4     N7K-C7010-FAN-F             14 W        120 W    Powered-Up
    N/A - Per module power not available
    Power Usage Summary:
    Power Supply redundancy mode (configured)                PS-Redundant
    Power Supply redundancy mode (operational)               PS-Redundant
    Total Power Capacity (based on configured mode)               6000 W
    Total Power of all Inputs (cumulative)                       12000 W
    Total Power Output (actual draw)                              1441 W
    Total Power Allocated (budget)                                4040 W
    Total Power Available for additional modules                  1960 W
    VDC-ADMIN#

  • I have a huge problem with memory usage.

    I am having two very huge problems with the amount of memory the game I'm working on is using. The first is that the background image for a part of my game takes up ~45mb of memory, but believe it or not, that's not my worst problem. i'm not worried about that right now.
    The really, really big problem does involve that image, though.
    Whn I'm done using the image, I can't get the resources it uses to be freed. As a result, the program uses more and more memory every time you go into that area of the game, because the memory used by tha area is just sitting there.
    I used Jprofiler to figure out exactly what wasn't getting released, because I do everything I know how to make everything be garbage collected, including setting all the references to the image to null after you leave that area of the game, but nothing worked.
    After I leave the area with the huge memory leak and give everything time to garbage collect, the main screen for memory usage shows about 45mb of memory used by 20 or so instances of int[], which is obviously the image.
    However, this obscenely huge int array doesn't show up in the heap snapshot, which according to them means there's no reference to it or the image anywhere in the program.
    Here's my question: If there's no reference anywhere to this int array, then why isn't it being garbage collected?

    Maybe you haven't actually released all references to that data.
    Or if you have one 45mb image, maybe you have a bunch of other huge ones and you're just seeing those.
    Why do you have a 45mb background image, though? Can't you use a standard technique like tiling it?

  • Problem with viewing modules on iPhone / iPad

    Hello. I have a problem with viewing my modules on iPhone and iPad. I have the same problem previously with Captivate 6, which I honestly thought that it is solved on Captivate 7, downloaded the trial version just to test it and I got nothing improved about that,
    So, when I publish and upload my course on cloud.scorm.com I got this:
    iPhone - It only shows the top left of slides and I get full voiceover
    iPad - shows photo top left on last slide (not first?) and hangs with no voiceover
    This is a simple 4 slide course which I use for testing the project.
    If someone wants to test here is a link: http://cloud.scorm.com/sc//InvitationLaunch?userInvitationId=d75b27a6-e7df-41fa-87e6-d7576 48aea93
    And I really expect some help with this, because it's really important not to have this type of problems.
    Thanks.

    "And I really expect some help with this..."
    Please remember that this is a user forum, not Adobe Support.  If you've paid some money for something and it's not working as you expect, you certainly have the right to require the manufacturer to provide after sales support. 
    But you would not track down another purchaser of the same product and tell them they owe you support...would you?

  • MSI Mainboard S-775 X48 - Problems with memory, i think

    MSI Mainboard S-775 X48
    INTEL Core 2 Quad Q6700 2.67GHz
    MSI GeForce 9800GTX 512MB GDDR3
    OCZ TECH DDR3 4GB ( OCZ TECH DDR3 PC3-12800 1600MHz Platinum XTC Dual Channel 2GB Kit(2x1024MB) 7-7-7 (OCZ3P16002GK))
    THERMALTAKE 750W ToughPower
    Hello.
    I have bought a new computer a week ago.
    First time i started the computer, two of the light diodes on the ram slot 3 and 4 was red. And have been ever since.
    The bios was on default, and the computer freezez now and then, maybe every hour or something. I tried to take out the 3 and 4 memory module and set the memory volt on 1.9. And everything worked very fine.
    So i tought maybe i should innstall the other two again. And now the computer is just unstable, artifacts in games, suddenly's restart's m.m.
    i know its something about "spd" ,but that its way over my league.
    So my questions, what is the right numbers to fill inn. ? and is it because of the memroy i have this problems?
    Appriciate all the help, and sorry for bad english.
    is this good enough?
    Memory Frequency   534.0 MHz (1:2)
    CAS#         7.0
    RAS# to CAS#      6
    RAS# Precharge      6
    Cycle Time (tRAS)   15
    Command Rate      1T
    Quote
      CPU-Z version 1.45
    Processors Map
    Number of processors   1
    Number of threads   4
    Processor 0
        -- Core 0
            -- Thread 0
        -- Core 1
            -- Thread 0
        -- Core 2
            -- Thread 0
        -- Core 3
            -- Thread 0
    Processors Information
    Processor 1 (ID = 0)
    Number of cores      4 (max 4)
    Number of threads   4 (max 4)
    Name         Intel Core 2 Quad Q6700
    Codename      Kentsfield
    Specification      Intel(R) Core(TM)2 Quad CPU    Q6700  @ 2.66GHz
    Package         Socket 775 LGA (platform ID = 4h)
    CPUID         6.F.B
    Extended CPUID      6.F
    Core Stepping      G0
    Technology      65 nm
    Core Speed      2670.2 MHz (10.0 x 267.0 MHz)
    Rated Bus speed      1068.1 MHz
    Stock frequency      2666 MHz
    Instructions sets   MMX, SSE, SSE2, SSE3, SSSE3, EM64T
    L1 Data cache      4 x 32 KBytes, 8-way set associative, 64-byte line size
    L1 Instruction cache   4 x 32 KBytes, 8-way set associative, 64-byte line size
    L2 cache      2 x 4096 KBytes, 16-way set associative, 64-byte line size
    FID/VID Control      yes
    FID range      6.0x - 10.0x
    max VID         1.263 V
    Features      , VT
    Chipset
    Northbridge      Intel X48 rev. 01
    Southbridge      Intel 82801IR (ICH9R) rev. 02
    Graphic Interface   PCI-Express
    PCI-E Link Width   x16
    PCI-E Max Link Width   x16
    Memory Type      DDR3
    Memory Size      4096 MBytes
    Channels      Dual (Symmetric)
    Memory Frequency   534.0 MHz (1:2)
    CAS#         7.0
    RAS# to CAS#      6
    RAS# Precharge      6
    Cycle Time (tRAS)   15
    Command Rate      1T
    Memory SPD
    DIMM #1
    General
    Memory type      DDR3
    Module format      UDIMM
    Manufacturer (ID)   OCZ (7F7F7F7FB0000000)
    Size         1024 MBytes
    Max bandwidth      PC3-10700F (667 MHz)
    Part number      OCZ3P16001G       
    Manufacturing date   Week 28/Year 07
    Attributes
    Number of banks      8
    Nominal Voltage      1.50 Volts
    EPP         no
    XMP         no
    Timings table
    Frequency (MHz)      476   571   667   762   857   
    CAS#         5.0   6.0   7.0   8.0   9.0   
    RAS# to CAS# delay   5   6   8   9   9   
    RAS# Precharge      5   6   8   9   9   
    TRAS         15   18   21   23   26   
    TRC         20   24   28   32   36   
    DIMM #2
    General
    Memory type      DDR3
    Module format      UDIMM
    Manufacturer (ID)   OCZ (7F7F7F7FB0000000)
    Size         1024 MBytes
    Max bandwidth      PC3-10700F (667 MHz)
    Part number      OCZ3P16001G       
    Manufacturing date   Week 28/Year 07
    Attributes
    Number of banks      8
    Nominal Voltage      1.50 Volts
    EPP         no
    XMP         no
    Timings table
    Frequency (MHz)      476   571   667   762   857   
    CAS#         5.0   6.0   7.0   8.0   9.0   
    RAS# to CAS# delay   5   6   8   9   9   
    RAS# Precharge      5   6   8   9   9   
    TRAS         15   18   21   23   26   
    TRC         20   24   28   32   36   
    DIMM #3
    General
    Memory type      DDR3
    Module format      UDIMM
    Manufacturer (ID)   OCZ (7F7F7F7FB0000000)
    Size         1024 MBytes
    Max bandwidth      PC3-10700F (667 MHz)
    Part number      OCZ3P16001G       
    Manufacturing date   Week 28/Year 07
    Attributes
    Number of banks      8
    Nominal Voltage      1.50 Volts
    EPP         no
    XMP         no
    Timings table
    Frequency (MHz)      476   571   667   762   857   
    CAS#         5.0   6.0   7.0   8.0   9.0   
    RAS# to CAS# delay   5   6   8   9   9   
    RAS# Precharge      5   6   8   9   9   
    TRAS         15   18   21   23   26   
    TRC         20   24   28   32   36   
    DIMM #4
    General
    Memory type      DDR3
    Module format      UDIMM
    Manufacturer (ID)   OCZ (7F7F7F7FB0000000)
    Size         1024 MBytes
    Max bandwidth      PC3-10700F (667 MHz)
    Part number      OCZ3P16001G       
    Manufacturing date   Week 28/Year 07
    Attributes
    Number of banks      8
    Nominal Voltage      1.50 Volts
    EPP         no
    XMP         no
    Timings table
    Frequency (MHz)      476   571   667   762   857   
    CAS#         5.0   6.0   7.0   8.0   9.0   
    RAS# to CAS# delay   5   6   8   9   9   
    RAS# Precharge      5   6   8   9   9   
    TRAS         15   18   21   23   26   
    TRC         20   24   28   32   36   
    Hardware monitor
    Fintek F71882F hardware monitor
    Voltage sensor 0   3.33 Volts [0xD0] (+3.3V)
    Voltage sensor 1   1.23 Volts [0x9A] (CPU VCORE)
    Voltage sensor 2   0.31 Volts [0x27] (VIN2)
    Voltage sensor 3   0.98 Volts [0x7B] (VIN3)
    Voltage sensor 4   0.97 Volts [0x79] (VIN4)
    Voltage sensor 5   1.10 Volts [0x89] (VIN5)
    Voltage sensor 6   1.51 Volts [0xBD] (VIN6)
    Voltage sensor 7   3.33 Volts [0xD0] (VSB3V)
    Voltage sensor 8   3.20 Volts [0xC8] (VBAT)
    Temperature sensor 0   40°C (103°F) [0x28] (TMPIN0)
    Temperature sensor 1   37°C (98°F) [0x25] (TMPIN1)
    Temperature sensor 2   49°C (120°F) [0x31] (TMPIN2)
    Fan sensor 0      2019 RPM [0x2E7] (FANIN0)
    Hardware monitor
    Intel Core 2 Quad Q6700 hardware monitor
    Temperature sensor 0   44°C (111°F) [0x38] (core #0)
    Temperature sensor 1   42°C (107°F) [0x3A] (core #1)
    Temperature sensor 2   38°C (100°F) [0x3E] (core #2)
    Temperature sensor 3   36°C (96°F) [0x40] (core #3)
    Dump hardware monitor
    Hardware monitor
    GeForce 9800 GTX hardware monitor
    Temperature sensor 0   58°C (136°F) [0x3A] (GPU Core)

    I think you are going to need to go into the bios and manually set the memory voltage and the memory settings.
    Try setting the memory voltage in the bios to 1.9 and then manually set the memory settings to 7-7-7-20 and see if that works.  If not; then change the memory settings 8-8-8-21 and see if that helps.  You might also need to up the northbridge voltage a notch or two since you are running memory in all four slots.
    Psy

  • Another Problem With Memory..

    Ok, so recently I just posted that I had a problem with mem... here is another. I just checked how much memory I'm using and it says I'm using 989 out of 1 gb.. is that normal? It was 504 about an hour ago and all I have open are Adium and Safari..

    The two important questions are 1) how much is inactive and 2) how many page outs are you showing in virtual memory. In fact, the second question is the one to key on. The number of page outs will indicate how often your computer has tried to access more memory than it has and as therefore been forced to copy RAM contents to the drive so it could perform the task it was asked to do. This is when your computer is being slowly choked to death.
    Now don't just open the Activity Monitor, look at the Page ins and Page outs and panic because you have 30,000 page outs. Keep in mind that's an accumulative number and if your Mac hasn't been restarted for 90 days, well that number may not be relevant at all. So restart the computer, and use it as you normally do. Then check the status of Page Outs at 30 minute intervals. The faster the Page Outs mount up with your normal usage the more you'll benefit from an upgrade.

  • PCI 5105 problems with memory

    Hi,
    I have a PCI 5105, and I have problems with it.
    I want get data with 60MS/s and 30M record lenght, but I got only 60MS/s and 20M record lenght. More than 20M record lenght, appear a error "Full Memory".
    My computer it's good, and the PCI 5105 can get 30M record lenght.
    Is trere a solution?
    Thanks.
    Sory my English.
    Marcela.

    Olá Marcela,
    Para evitar esse problema de memória cheia, você pode tentar usar a arquitetura produtor consumidor do exemplo abaixo para otimizar a tranferêcia de dados entre a sua placa  PCI 5105 e o seu computador. Com isso voce pode extrair o máximo de dados da usa placa e armazenar na memóra do seu PC até que os dados sejam gravados em disco.
    NI-SCOPE Stream to Disk Using Win32 File IO
    http://zone.ni.com/devzone/cda/epd/p/id/5273
    Espero ter ajudado,
    Atenciosamente,
    Osvaldo Santos

  • Problems with vmware module and Xorg

    Hello everybody!
    Today I wanted to install and setup Arch Linux on my computer into a VMware Virtual Machine, first steps were very nice and worked ok, but now I trying to install LXDE as a desktop I already installed xorg drivers and lxde this is my Xorg.0.log
    http://pastebin.com/f8gwbdcb
    [ 979.359] Current Operating System: Linux localhost 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 979.393] Initializing built-in extension MIT-SCREEN-SAVER
    [ 979.411] (EE) Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: /usr/lib/xorg/modules/drivers/vmware_drv.so: file too short
    [ 979.411] (EE) Failed to load module "vmware" (loader failed, 7)
    [ 979.411] (EE) No drivers available.
    [ 979.411] (EE)
    [ 979.411] (EE) no screens found(EE)
    [ 979.412] (EE)
    [ 979.412] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 979.413] (EE)
    If I want to see what's inside vmware_drv.so.... it's a empty file, all files under /usr/lib/xorg/modules/drivers are empty: `du *`
    4 Desktop
    0 /usr/lib/xorg/modules/drivers/ark_drv.so
    0 /usr/lib/xorg/modules/drivers/ast_drv.so
    0 /usr/lib/xorg/modules/drivers/ati_drv.so
    0 /usr/lib/xorg/modules/drivers/cirrus_alpine.so
    0 /usr/lib/xorg/modules/drivers/cirrus_drv.so
    0 /usr/lib/xorg/modules/drivers/cirrus_laguna.so
    0 /usr/lib/xorg/modules/drivers/dummy_drv.so
    0 /usr/lib/xorg/modules/drivers/fbdev_drv.so
    0 /usr/lib/xorg/modules/drivers/glint_drv.so
    0 /usr/lib/xorg/modules/drivers/i128_drv.so
    0 /usr/lib/xorg/modules/drivers/intel_drv.so
    0 /usr/lib/xorg/modules/drivers/mach64_drv.so
    0 /usr/lib/xorg/modules/drivers/mga_drv.so
    0 /usr/lib/xorg/modules/drivers/modesetting_drv.so
    0 /usr/lib/xorg/modules/drivers/neomagic_drv.so
    0 /usr/lib/xorg/modules/drivers/nouveau_drv.so
    0 /usr/lib/xorg/modules/drivers/nv_drv.so
    0 /usr/lib/xorg/modules/drivers/openchrome_drv.so
    0 /usr/lib/xorg/modules/drivers/r128_drv.so
    0 /usr/lib/xorg/modules/drivers/radeon_drv.so
    0 /usr/lib/xorg/modules/drivers/savage_drv.so
    0 /usr/lib/xorg/modules/drivers/siliconmotion_drv.so
    0 /usr/lib/xorg/modules/drivers/sis_drv.so
    0 /usr/lib/xorg/modules/drivers/tdfx_drv.so
    0 /usr/lib/xorg/modules/drivers/trident_drv.so
    0 /usr/lib/xorg/modules/drivers/v4l_drv.so
    0 /usr/lib/xorg/modules/drivers/vesa_drv.so
    0 /usr/lib/xorg/modules/drivers/vmware_drv.so
    0 /usr/lib/xorg/modules/drivers/voodoo_drv.so
    Arch linux looks really nice, clear and simple I want to go on playing with this distro but I have problems with this issue .
    Thanks!

    Hello everybody!
    Today I wanted to install and setup Arch Linux on my computer into a VMware Virtual Machine, first steps were very nice and worked ok, but now I trying to install LXDE as a desktop I already installed xorg drivers and lxde this is my Xorg.0.log
    http://pastebin.com/f8gwbdcb
    [ 979.359] Current Operating System: Linux localhost 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 979.393] Initializing built-in extension MIT-SCREEN-SAVER
    [ 979.411] (EE) Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: /usr/lib/xorg/modules/drivers/vmware_drv.so: file too short
    [ 979.411] (EE) Failed to load module "vmware" (loader failed, 7)
    [ 979.411] (EE) No drivers available.
    [ 979.411] (EE)
    [ 979.411] (EE) no screens found(EE)
    [ 979.412] (EE)
    [ 979.412] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 979.413] (EE)
    If I want to see what's inside vmware_drv.so.... it's a empty file, all files under /usr/lib/xorg/modules/drivers are empty: `du *`
    4 Desktop
    0 /usr/lib/xorg/modules/drivers/ark_drv.so
    0 /usr/lib/xorg/modules/drivers/ast_drv.so
    0 /usr/lib/xorg/modules/drivers/ati_drv.so
    0 /usr/lib/xorg/modules/drivers/cirrus_alpine.so
    0 /usr/lib/xorg/modules/drivers/cirrus_drv.so
    0 /usr/lib/xorg/modules/drivers/cirrus_laguna.so
    0 /usr/lib/xorg/modules/drivers/dummy_drv.so
    0 /usr/lib/xorg/modules/drivers/fbdev_drv.so
    0 /usr/lib/xorg/modules/drivers/glint_drv.so
    0 /usr/lib/xorg/modules/drivers/i128_drv.so
    0 /usr/lib/xorg/modules/drivers/intel_drv.so
    0 /usr/lib/xorg/modules/drivers/mach64_drv.so
    0 /usr/lib/xorg/modules/drivers/mga_drv.so
    0 /usr/lib/xorg/modules/drivers/modesetting_drv.so
    0 /usr/lib/xorg/modules/drivers/neomagic_drv.so
    0 /usr/lib/xorg/modules/drivers/nouveau_drv.so
    0 /usr/lib/xorg/modules/drivers/nv_drv.so
    0 /usr/lib/xorg/modules/drivers/openchrome_drv.so
    0 /usr/lib/xorg/modules/drivers/r128_drv.so
    0 /usr/lib/xorg/modules/drivers/radeon_drv.so
    0 /usr/lib/xorg/modules/drivers/savage_drv.so
    0 /usr/lib/xorg/modules/drivers/siliconmotion_drv.so
    0 /usr/lib/xorg/modules/drivers/sis_drv.so
    0 /usr/lib/xorg/modules/drivers/tdfx_drv.so
    0 /usr/lib/xorg/modules/drivers/trident_drv.so
    0 /usr/lib/xorg/modules/drivers/v4l_drv.so
    0 /usr/lib/xorg/modules/drivers/vesa_drv.so
    0 /usr/lib/xorg/modules/drivers/vmware_drv.so
    0 /usr/lib/xorg/modules/drivers/voodoo_drv.so
    Arch linux looks really nice, clear and simple I want to go on playing with this distro but I have problems with this issue .
    Thanks!

  • Problem with memory

    Hello everybody
    so i have problem with my ipod touch 16gb
    it had being unworking for year, but recently i have restored it in itunes
    problem is that itunes say that it is ipod touch 8gb, not 16
    Message was edited by: marsthe

    The back of your touch is engraved with the size. Does yours say 16GB?
    Since you are out of warranty, you can send it in for repairs (see the Apple Support site for details and costs) or you can just use it as an 8GB version and enjoy it.

Maybe you are looking for