Problem with FNDLOAD upload command for Concurrent Program
Hi Apps Gurus,
I am facing a peculiar problem with the FNDLOAD command.
My customer has a concurrent program which is running fine in Prod, and now they have requeseted for a change in the program, the change requested was to modify the parameters and the name of the program. I have done the changes and when I try migrating this change from DEV instance to IAT using FNDLOAD commands it is not getting migrated. There does not seem to be any problem with the LDT file, There is no error message in the log as well.
However I have noticed something very peculiar.* In the target instance (IAT) , when i run the FNDLOAD command directly the migration is unsuccessful but when i delete the existing parameters of the prog and rename the concurrent program and then run the FNDLOAD command the migration is sucessful and the changes are getting reflected!!. I dont understand why this is happening. This is happening in preprod as well , the migration is unsucessfull initially when i directly run the command, when i modify the name and parameters of the prog and then run the command the migration is sucessful. Now i do not have access to prod and this trick of changing prog name and parameters cannot be done in prod , so I need a proper solution for the migration.
Any pointers to resolve this issue will be helpful.
Thanks,
Mahesh
I am facing a peculiar problem with the FNDLOAD command.
My customer has a concurrent program which is running fine in Prod, and now they have requeseted for a change in the program, the change requested was to modify the parameters and the name of the program. I have done the changes and when I try migrating this change from DEV instance to IAT using FNDLOAD commands it is not getting migrated. There does not seem to be any problem with the LDT file, There is no error message in the log as well.
However I have noticed something very peculiar.* In the target instance (IAT) , when i run the FNDLOAD command directly the migration is unsuccessful but when i delete the existing parameters of the prog and rename the concurrent program and then run the FNDLOAD command the migration is sucessful and the changes are getting reflected!!. I dont understand why this is happening. This is happening in preprod as well , the migration is unsucessfull initially when i directly run the command, when i modify the name and parameters of the prog and then run the command the migration is sucessful. Now i do not have access to prod and this trick of changing prog name and parameters cannot be done in prod , so I need a proper solution for the migration.
Any pointers to resolve this issue will be helpful.What are the commands you used for the download/upload?
Do you get any errors in the log files?
Please see (FNDLOAD Download / Upload Concurrent Programs Fails To Load Parameters [ID 1101946.1]).
Thanks,
Hussein
Similar Messages
-
Problem with a call to a concurrent program from a trigger body...
I have a table and a before update trigger on it.
The trigger calls a packaged procedure. that submits a concurrent request.
This concurrent request calls a packaged procedure.
This packaged procedure inserts data into another table and then commits the insert.
When I update the table with the trigger on it, (the above narrated scenario)....
I come up with the error...
ORA-04092: cannot SET SAVEPOINT in a trigger
I didnt use any savepoint in my code.
Any help is appreciated. Its a high priority issue.
Thnx,
KiranYou problem is that the standard PL/SQL code to submit a concurrent request (which is presumably what you are running) performs the savepoint, unless you have told it you are running from a database trigger. The processing performed by the concurrent request when it runs is not relevant to the processing of the trigger.
We have code that submits a concurrent request successfully from a trigger, but before the call to FND_Request.Submit_Request, we call FND_Request.Set_Mode(TRUE) which tells the processing in FND_Request.Submit_Request that we are running from a database trigger and not to perform it's savepoint processing. -
Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics. -
Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.
Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.
-
I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help
Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
http://www.apple.com/itunes/
If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
1. Open the control panel
2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
3. Navigate to "Apple Software Update" in the list and click on it
4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
Once you repair this, try running iTunes and the update again.
Fingers crossed! -
I keep getting an error message that reads: There is a problems with this windows installer package A program required for this install to complete could not be run. Contact your support personnel or package vendor. How do I correct this problem. HELP !!!!!!!!!!!!!!
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I went to upgrade itunes and when it finally downloaded, i got the following message: There is a problem with this windows installer. A program required for this install to complete could not be run.
I was advised to unistall the old itune, which i did and then loaded the latest itune 10.5 i think. It dowloaded fine to a point and before finishing, it came up with the same message.
Is the problem with the itune installer or my windows installer on my laptop?Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
When `ve downloaded the latest itunes and then i go to install it i get a message saying there is a problem with this windows installer package a program required for the install to complete could not be run, contact your support personnal or package vendor any ideas anyone ? thanks
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Having trouble trying to install itunes 10.5. Receive message saying 'There is a problem with this installer package. A program required for this install to complete could not be found. Please contact product vendor'
Managed to get the installation sorted. Go to Control Panel, and where you have a list of all installed programs, repair all the Apple/Itunes related programs. Installation worked fine after that. Hopefully it helps you out too!
-
i neen try to down load the new itunes 10.5 for windows vista but for some reason it is not working at all . this is what it show for the errors is "there is a problem with this windows installer package . a program required for this install to complete could not be run. contact your support personnel or package vendor" plz help me with this!!!!!!!
Repair your Apple software update.
Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
Start > Control Panel > Programs n Features > highlight ASU and click CHANGE then REPAIR, -
I keep getting this error message that says "There is a problem with this windows intaller packaage.a program required for this install to complete could not be run.contact ur support personnel or package vendor" what does it mean? and how do i fix it?
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I downloaded itunes but when i try to install i get an error saying "There is a problem with the windows install. A programe needed to install could not be open"
can anyone help?Ok, Below is what worked for me somewhat.
Okay ... try downloading and saving a copy of the iTunesSetup.exe to your PC from the Apple website:
http://www.apple.com/itunes/download/
Now download a trial version of WinRAR:
http://www.rarlab.com/download.php
Open the iTunesSetup.exe with WinRAR, and try to run the standalone install of Apple Application Support from the AppleApplicationSupport.msi you find in there.
It works now BUT there are still problems. It is not allowing or recognizing my Cd/DVD player and i CANT burn. Looking still for this fix. -
I had itunes set up and working since i have had my iPhone and iPad. One day it asked to be updated, so i did. After it updated it stopped working because whenever i tried to open it it would say "this shortcut has either been deleted or moved would you like to delete this shortcut". This kept on happening so I uninstalled it and tried to reinstall it, but then comes my second problem. While itunes is downloading an error pops up saying "There is a problem with this windows installer package A program required for this install to complete could not be run contact your personnel or package vendor". This is my main problem and i don't know how to stop it i have tried a disc clean up, De frag and trying to completely take everything to do with itunes off my computer, but it still doesn’t work. HELP ME!!! I NEED ITUNES!!
Repair your Apple Software Update
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU in All Programs, go to Control Panel/Programs n Features(Win7 or Vista) or Add & Remove Programs(XP) -
trouble updating itunes - this message appears "there is a problem with this windows installer package. a program required for this install to complete could not be run"
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
when i run installation itunes,i see this massage "there is a problem with this windows installer package.a program required for this install to complete could not be run. contact your support personnel or package vendor."please help me for installation itunes on my pc completely.
Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm. So will have to wait
Maybe you are looking for
-
How to handle error message during PAI?
Hi Experts, Need help here. In my dialog screen, I have a field which is typed 'QUAN'. In entering different format , e.g. with non numeric value or a negative value, an error message appear and it does not process the MODULES inside the chain or FIE
-
Next posting date in payment proposal
Hello Experts, Can anyone tell me the table/field where the next posting date specified in the proposal is stored?
-
Error when recovering a database in a new server
Hi folks, I took a full RMAN backup from a Windows Server 2003 32bit and tried to restore it in a new server (Windows Server 2003 64bit). The restore was apparently ok, but when recovering, I got this error: archived log for thread 1 with sequence 0
-
Handling Oracle RAC Failover at the application layer
Hi All, I am currently researching best practices for handling oracle RAC failover at the application layer since transactional statements (INSERT,UPDATE and DELETE) are not handled transparently. So I have few questions for the community: 1. In case
-
How do I print from mini I pad to wireless HPOfficejet printer 4620
How do I print from my mini I Pad to my wireless HPOfficejet printer 4620.