Problem with initial page load

Hi,
I have created an interactive guide to Yellowstone:
http://www.expeditionguides.com/yellowstone/yellowstoneXG.html
However, when I visit the site for the first time the main menu's background image doesn't show up. Instead, the page is black for 10-15 seconds (when I view it in a Firefox browser on my Galaxy smartphone, it never changes from black). On my desktop Firefox browser, the main menu's background image eventually shows up and from that point on there is no problem.
I am guessing that the problem stems from the fact that the page features a video and an extensive virtual tour, both of which are pretty large in size. My objective was to fade the main menu image when either the video or virtual tour buttons are selected, revealing the applicable content below. Does anyone have a suggestion on how to tweak this to make the main menu image and buttons show up faster?
Thanks,
Paul

I would try using OpenDNS servers. System Preferences>Network>Advanced>DNS. In the left side column click on the + sign and add the following:
208.67.222.222
208.67.220.220
Click OK. Then click Apply.
Info on OpenDNS is here:
http://www.opendns.com/

Similar Messages

Problem with JSF Page loading with WAS 6.1.0.2

We are using Trindad Faces & the app server is Websphere 6.1.0.2.
When the server starts up, its gives lots of logs (does not say error or warning) as below.
11:13:58:881 EST] 00000019 jsf W com.ibm.ws.jsf.configuration.FacesConfigParser parseShared FacesConfigParser.parseShared(): unable to locate : [group]
[11/10/06 11:13:59:061 EST] 00000019 jsf W com.ibm.ws.jsf.configuration.FacesConfigParser parseShared FacesConfigParser.parseShared(): unable to locate : [property-metadata]
[11/10/06 11:13:59:231 EST] 00000019 jsf W com.ibm.ws.jsf.configuration.FacesConfigParser parseShared FacesConfigParser.parseShared(): unable to locate : [group]
[11/10/06 11:13:59:372 EST] 00000019 jsf W com.ibm.ws.jsf.configuration.FacesConfigParser parseShared FacesConfigParser.parseShared(): unable to locate : [property-metadata]
[11/10/06 11:13:59:532 EST] 00000019 jsf W com.ibm.ws.jsf.configuration.FacesConfigParser parseShared FacesConfigParser.parseShared(): unable to locate : [group]
[11/10/06 11:13:59:782 EST] 00000019 jsf W com.ibm.ws.jsf.configuration.FacesConfigParser parseShared FacesConfigParser.parseShared(): unable to locate : [property-metadata]
[11/10/06 11:13:59:942 EST] 00000019 jsf W com.ibm.ws.jsf.configuration.FacesConfigParser parseShared Face
And, when I try to access the Page, the following error message is shown up and the page is not getting displayed.
java.lang.NullPointerException
at javax.faces.component.UIComponentBase.encodeEnd(UIComponentBase.java:754)
at org.apache.myfaces.trinidad.render.RenderUtils.encodeRecursive(RenderUtils.java:66)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:255)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:277)
at org.apache.myfaces.trinidadinternal.renderkit.core.xhtml.PanelPartialRootRenderer.renderContent(PanelPartialRootRenderer.java:70)
at org.apache.myfaces.trinidadinternal.renderkit.core.xhtml.BodyRenderer.renderContent(BodyRenderer.java:134)
at org.apache.myfaces.trinidadinternal.renderkit.core.xhtml.PanelPartialRootRenderer.encodeAll(PanelPartialRootRenderer.java:150)
at org.apache.myfaces.trinidadinternal.renderkit.core.xhtml.BodyRenderer.encodeAll(BodyRenderer.java:76)
at org.apache.myfaces.trinidad.render.CoreRenderer.delegateRenderer(CoreRenderer.java:294)
Any thoughts on what could be the issue?
Thanks in advance!!

Hi Raymond,
Is it possible to package a JSF implementation with your web application and then use the usual classloading order?
* Tried that, looks like that wont work. WAS throws all sorts of exceptions :
java.lang.NoSuchMethodError: javax/servlet/jsp/JspFactory.getJspApplicationContext(Ljavax/servlet/ServletContext;)Ljavax/servlet/jsp/JspApplicationContext;
+Caused by: org.springframework.binding.expression.EvaluationException: An ELException occurred getting the value for expression 'ehrRequest.savePractice(practice)' on context [class org.springframework.webflow.engine.impl.RequestControlContextImpl]+
+.....+
What about hiding the JMS queuing behind an EJB (that way the JMS happens in the EJB container, not the web container, a total hack but what can you do)? Have you tried moving all of your classes and libraries from the WAR and into the application space?
Thats actually a pretty good idea. I am gonna try that.

When i try to open a site, i get several new pages open with 4 tabs apiece, 2 index of files pages and 2 server not found pages. i have had as many as 10 of these pop up one after the other. initial page loads but i have to close all the other pages.

i have an HP with mozilla 4 browser

Hi,
Thanks for the reply. I have tried this on another machine running the same version of Blackboard. It works fine.
Only difference is that the machine that has the JVM crash is running on Fujitsu PrimePower and the OS is Solaris 9 (but twigged for PrimePower).
The one where it runs and starts up successfully is running on SunFire (OS is Solaris 10).
I am wondering if there is a problem with the JVM loading required libraries because of the OS being different versions.
Any leads on this is welcomed. Thank you.
Regards,
Hon Peng
===================
On Fujitsu Primepower
SunOS 5.9 Generic_118558-33 sun4us sparc FJSV,GPUS
the Dependencies for libjvm.so are as follows:
===================
bash-2.05$ ldd -r libjvm.so
libsocket.so.1 => /usr/lib/libsocket.so.1
libsched.so.1 => /usr/lib/libsched.so.1
libdl.so.1 => /usr/lib/libdl.so.1
libCrun.so.1 => /usr/lib/libCrun.so.1
libm.so.1 => /usr/lib/libm.so.1
libthread.so.1 => /usr/lib/libthread.so.1
libc.so.1 => /usr/lib/libc.so.1
libnsl.so.1 => /usr/lib/libnsl.so.1
libmp.so.2 => /usr/lib/libmp.so.2
/usr/platform/FJSV,GPUS/lib/libc_psr.so.1
=====================================
On SunFire, Sun machine
SunOS 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-280R
the dependencies are different for the libjvm.so:
=====================================
bash-2.05$ ldd -r libjvm.so
libsocket.so.1 => /lib/libsocket.so.1
libsched.so.1 => /usr/lib/libsched.so.1
libdl.so.1 => /lib/libdl.so.1
libCrun.so.1 => /usr/lib/libCrun.so.1
libm.so.1 => /lib/libm.so.1
libthread.so.1 => /lib/libthread.so.1
libc.so.1 => /lib/libc.so.1
libnsl.so.1 => /lib/libnsl.so.1
libmp.so.2 => /lib/libmp.so.2
libmd5.so.1 => /lib/libmd5.so.1
libscf.so.1 => /lib/libscf.so.1
libdoor.so.1 => /lib/libdoor.so.1
libuutil.so.1 => /lib/libuutil.so.1
/platform/SUNW,Sun-Fire-280R/lib/libc_psr.so.1
libm.so.2 => /lib/libm.so.2
/platform/SUNW,Sun-Fire-280R/lib/libmd5_psr.so.1

Problem with module lazy loading in flex 3

Hi every body!
I have some problems with Module lazy loading. I am using flex 3.5, Module-flex3-0.14, parsley 3.2.
I can't get the LazyModuleLoadPolicy working correctly.
In my main application (the one that loads the modules), my parsley context is the following:
        <cairngorm:LazyModuleLoadPolicy objectId="lazyLoadPolicy" type="{ OpenViewMessage }" />
     <cairngorm:ModuleMessageInterceptor type="{ OpenViewMessage }"/>
     <cairngorm:ParsleyModuleDescriptor objectId="test"
          url="TestModule.swf"
          applicationDomain="{ClassInfo.currentDomain}"
     />
And to load my module:
[Inject(id="test")]
[Bindable] public var test:IModuleManager;
<core:LazyModulePod
     id="moduleLoader"
     moduleManager="{test}"
     moduleId="testModule"
/>
with LazyModulePod.mxml:
<mx:Canvas
    xmlns:mx="http://www.adobe.com/2006/mxml"
    xmlns:module="com.adobe.cairngorm.module.*"
    xmlns:parsley="http://www.spicefactory.org/parsley">
    <mx:Script>
        <![CDATA[
            import com.adobe.cairngorm.module.ILoadPolicy;
            import com.adobe.cairngorm.module.IModuleManager;
            [Bindable]
            public var moduleId:String;
            [Bindable]
            public var moduleManager:IModuleManager;
            [Bindable]
            [Inject(id="lazyLoadPolicy")]
            public var lazyLoadPolicy:ILoadPolicy;
        ]]>
    </mx:Script>
    <parsley:Configure/>
    <module:ViewLoader id="moduleLoader"
        moduleId="{ moduleId }"
        moduleManager="{ moduleManager }"
        loadPolicy="{lazyLoadPolicy}">
         
    </module:ViewLoader>
</mx:Canvas>
OpenViewMessage.as in a swc:
public class OpenViewMessage
        private var _moduleId:String;
        private var _viewId:String;
        public function OpenViewMessage(moduleId:String, viewId:String)
            this._moduleId = moduleId;
            this._viewId = viewId;
        public function get viewId():String{
            return _viewId;
        [ModuleId]
        public function get moduleId():String
            return _moduleId;
In another flex project, my module context is:
<mx:Object
     xmlns:mx="http://www.adobe.com/2006/mxml"
     xmlns:controler="com.cegedim.myit.controler.*">
     <controler:WindowControler/>
</mx:Object>
The module implements IParsleyModule
<mx:Module xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical"
     implements="com.adobe.cairngorm.module.IParsleyModule"
     xmlns:spicefactory="http://www.spicefactory.org/parsley">
     <mx:Script>
          <![CDATA[
               import org.spicefactory.parsley.flex.FlexContextBuilder;
               import com.adobe.cairngorm.module.IParsleyModule;
               public function get contextBuilder():ContextBuilderTag
                return contextBuilderTag;
          ]]>
     </mx:Script>
     <spicefactory:ContextBuilder id="contextBuilderTag" config="{ MyITTestModuleContext }"/>
     <spicefactory:Configure/>
</mx:Module>
and the WindowControler:
public class WindowControler
     public function WindowControler(){}
     [Init]
        public function initialize():void
            Alert.show("Module Initialized");
        [MessageHandler(scope="local")]
        public function openViewMessageHandler(message:OpenViewMessage):void
            Alert.show("Opening view " + message.viewId + " in the module " + message.moduleId);
If i uncomment the basicLoadPolicy in LazyModulePod.mxml and remove the lazyModuleLoadPolicy, everything works fine. The module is loaded when it's added to stage and it receives correctly messages dispatched to it. But with the lazy policy the module never loads.
I may have missed something or there is somthing i don't understand because i tried the ModuleTest provided in example in cairngorm sources. It works fine (i mean loading the moduleA2 when receiving a message), but if i replace the change the lazyModulePolicy to listen to broadcasted messages instead of a pingMessage, the module never loads too.
    <cairngorm:LazyModuleLoadPolicy objectId="lazyLoadPolicy" type="{ BroadcastMessage }" />
    <cairngorm:ModuleMessageInterceptor
        type="{ BroadcastMessage }" moduleRef="moduleA" />
public class BroadcastMessage
    public function BroadcastMessage()
If someone has any clue, i'll be happy to test it =)
Thanks.

Hello, back on my issue, i tested a little bit more the message dispaching.
I read the lazyLoadPolicy class and noticed that it always has to have a ModuleId property in the message to work, that's why the broadcast message didn't work to awake the module with the lazy loading policy.
So i added copy of my module:
     <cairngorm:ParsleyModuleDescriptor objectId="test"
          url="TestModule.swf"
          applicationDomain="{ClassInfo.currentDomain}"
     />
     <cairngorm:ParsleyModuleDescriptor objectId="testbis"
          url="TestModuleBis.swf"
          applicationDomain="{ClassInfo.currentDomain}"
     />
Set them both with a basicLoadPolicy, and tries to dispatch a message to only one of them using the ModuleId metatag. I then noticed that both modules received the message and not only the one i expected.
I then changed the ModuleMessageInterceptor configuration to dispatch to only one kind of module:
<cairngorm:ModuleMessageInterceptor type="{ OpenViewMessage }" moduleRef="test"/>
and this worked as expected. Only the first module catched the message. I am obiously messing with the ModuleId metatag but i cannot see what's wrong...
I compiled with
-keep-as3-metadata+=ModuleId
but this hasn't changed anything...

OCI bowser generates new session with each page load

Here is a summary of my problem:
I am trying to implement the SAP Open Catalog Interface (OCI) with our eCommerce software, but I am having issues with the Web browser that OCI uses.
Our eCommerce software utilizes the browser session id to identify the user. Our issues is that the OCI browser supplies a new session id with each page load.
The weird part is that if I open a standard instance of IE, access the site, and then access the site though OCI the same session is shared by both the OCI browser and the IE browser. The OCI browser is now able to maintain the session ID as the user browses the site.
Thanks.

Thank you for your quick response.
I understand that session IDs are always unique, and should only last for as long as the instance of the browser is open.
What I have seen happen is that the session ID will get recreated with each page load with in a single instance of the OCI browser.
When the site is opened in OCI it logs the user in, and then redirects them to the homepage. The problem is that the load of the login page, and the load of the homepage have different session IDs. If the user then clicks on a link on the homepage that page load will again have a different page load. This causes the eCommerce system to see them as separate users.
As I described when I open an instance of IE first it seems to work. This leads me to believe that the OCI browser can read the cookie information, but can't write or create.
I am trying to figure out why the OCI browser keeps generating new Session IDs.

Execute search programatically during initial page load.

hi,
when the page is initially rendered, i have requirement to have the page automatically retrieve rows that belong to the user (ie execute a search programatically)
to achieve that i did the following -
1. created search page using autocustomizationcriteria
2. mapped all search fields to corresponding VO fields ( i intend to not override the default where clause since all my search can directly be mapped to a VO attribute)
3.populated the userlogin value into the corresponding search field as follows -
String lg = pageContext.getUserName();
OAMessageLovInputBean lovBean = (OAMessageLovInputBean)webBean.findChildRecursive("searchLogin"); //the searchfield is a messageLOVInput
lovBean.setValue(pageContext, lg);
the behavior i was expecting is for the page to automatically generate the where clause since i populated the search field that is mapped to the VO attribute and execute the query (i did not invoke executequery() per dev guide) BUT instead it is executing a BLIND query with no where clause.
would appreciate any insight into what i am doing wrong....
thank you.

hi, i had initially done the setting of the whereclause and executing programatically. however, when you do that, subsequently, the 'Go' button also needs to be handled programatically (including all search criteria whereclause generation) and then you loose all the features of the queryBean especially the different search options (eg like , starts with etc) on the Advanced Panel unless you code for all those features yourself...... NOTE - the need to handle the 'Go' button yourself happens even though after executeQuery() for just the initial page load, i reset the whereclause and whereclauseparams to NULL....
i also do not have a formvalue associated with the searchlogin field.
any other inputs please ?
thank you.
Edited by: user8249972 on Jan 28, 2013 10:22 AM

Whats the problem with this page

hi,
i have problem with this page
page
it loading the video but not showing any content related to
the video.
i use
[code]
var netCon:NetConnection = new NetConnection();
netCon.connect(null);
var netStr:NetStream = new NetStream(netCon);
netStr.addEventListener(AsyncErrorEvent.ASYNC_ERROR,
getError);
var video:Video = new Video();
video.attachNetStream(netStr);
addChild(video);
video.x=201;
video.y=125;
function getError(e:AsyncErrorEvent) {
play_btn.addEventListener(MouseEvent.MOUSE_DOWN, playVideo);
function playVideo(e:MouseEvent) {
netStr.resume();
removeEventListener(KeyboardEvent.KEY_DOWN, keyPressHandler
this.addEventListener(Event.ENTER_FRAME, fileLoaded);
var loaderBar:Sprite = new Sprite();
addChild(loaderBar);
function fileLoaded(e:Event) {
var percent:Number = (netStr.bytesLoaded * 100 ) /
netStr.bytesTotal;
loaderBar.graphics.clear();
loaderBar.graphics.beginFill(0xDE2C18);
loaderBar.graphics.drawRect(205,378,percent * 4.32,5);
loaderBar.graphics.endFill();
if (percent==100) {
this.removeEventListener(Event.ENTER_FRAME, fileLoaded);
[/code]

here is the full code
and i have an error saying:
ArgumentError: Error #2004: One of the parameters is
invalid.
at flash.display::Graphics/drawRect()
at VIDEOPLAYER_fla::MainTimeline/fileLoaded()
[code]
import flash.display.Sprite;
import flash.net.NetConnection;
import flash.display.SimpleButton;
import flash.net.NetStream;
import flash.events.NetStatusEvent;
import flash.media.Video;
import flash.events.MouseEvent;
import flash.events.KeyboardEvent;
import flash.events.Event;
import flash.display.Graphics;
import flash.text.*;
var netCon:NetConnection = new NetConnection();
netCon.connect(null);
var netStr:NetStream = new NetStream(netCon);
netStr.addEventListener(AsyncErrorEvent.ASYNC_ERROR,
getError);
var URL:String =
"/hakans/videos/BEDUK_AUTOMATIK00.flv?start=";
var offset:uint = 1048576;
var tamURL:String = URL + offset;
trace(tamURL);
var video:Video = new Video();
video.attachNetStream(netStr);
video.x=201;
video.y=125;
netCon = new NetConnection();
netCon.addEventListener(NetStatusEvent.NET_STATUS,
netStatusHandler);
netCon.addEventListener(SecurityErrorEvent.SECURITY_ERROR,
securityErrorHandler);
function netStatusHandler(event:NetStatusEvent):void {
switch (event.info.code) {
case "NetConnection.Connect.Success":
connectStream();
break;
case "NetStream.Play.StreamNotFound":
trace("Unable to locate video: " + tamURL);
break;
function connectStream():void {
netStr.addEventListener(NetStatusEvent.NET_STATUS,
netStatusHandler);
netStr.addEventListener(AsyncErrorEvent.ASYNC_ERROR,
asyncErrorHandler);
netStr.play(tamURL);
addChild(video);
function securityErrorHandler(event:SecurityErrorEvent):void
trace("securityErrorHandler: " + event);
function asyncErrorHandler(event:AsyncErrorEvent):void {
// ignore AsyncErrorEvent events.
function getError(e:AsyncErrorEvent) {
var myTextBox:TextField = new TextField();
var myText:String = "Bytes loaded";
function TextWithImage()
addChild(myTextBox);
myTextBox.text = myText+netStr.bytesLoaded;
/*--------------< Videoyu Durdurma, Oynatma ve Başa
Alma >------------------*/
stage.addEventListener( KeyboardEvent.KEY_DOWN,
keyPressHandler );
function keyPressHandler( e:KeyboardEvent ):void {
// if the spaceBar is pressed then toggle video play/pause
if( e.charCode == 32 ) {
netStr.togglePause();
play_btn.addEventListener(MouseEvent.MOUSE_DOWN, playVideo);
function playVideo(e:MouseEvent) {
netStr.resume();
removeEventListener(KeyboardEvent.KEY_DOWN, keyPressHandler
pause_btn.addEventListener(MouseEvent.MOUSE_DOWN,
pauseVideo);
function pauseVideo(e:MouseEvent) {
netStr.pause();
stop_btn.addEventListener(MouseEvent.MOUSE_DOWN, stopVideo);
function stopVideo(e:MouseEvent) {
netStr.pause();
netStr.seek(0);
fastforward_btn.addEventListener(MouseEvent.MOUSE_DOWN,doForward);
function doForward(e:MouseEvent):void {
var f:int = 1; //you can schange the skipping time here
netStr.pause();
netStr.seek(netStr.time + f);
netStr.resume();
rewind_btn.addEventListener(MouseEvent.MOUSE_DOWN,doRewind);
function doRewind(e:MouseEvent):void{
var x:int = 2;
netStr.pause();
netStr.seek(netStr.time - x);
netStr.resume();
fullscreen_btn.addEventListener(MouseEvent.MOUSE_DOWN,doFull);
function doFull(e:MouseEvent):void{
stage.displayState = StageDisplayState.FULL_SCREEN;
/*--------------< Videoyu Durdurma, Oynatma ve Başa
Alma / >------------------*/
/*--------------< Video İçin Yükleme Bilgi
Çubuğu >------------------*/
var loaderBg:Sprite = new Sprite();
loaderBg.graphics.beginFill(0xc78f8e);
loaderBg.graphics.drawRect(205 , 378 , 430 , 5);
loaderBg.graphics.endFill();
addChild(loaderBg);
this.addEventListener(Event.ENTER_FRAME, fileLoaded);
var loaderBar:Sprite = new Sprite();
addChild(loaderBar);
function fileLoaded(e:Event) {
var percent:Number = (netStr.bytesLoaded * 100 ) /
netStr.bytesTotal;
loaderBar.graphics.clear();
loaderBar.graphics.beginFill(0xDE2C18);
loaderBar.graphics.drawRect(205 , 378 , percent * 4.32 , 5);
loaderBar.graphics.endFill();
if (percent==100) {
this.removeEventListener(Event.ENTER_FRAME, fileLoaded);
/*--------------< Video İçin Yükleme Bilgi
Çubuğu / >------------------*/
/*--------------< Video Meta Bilgileri
>------------------*/
var metaObject:Object = new Object();
netStr.client = metaObject;
metaObject.onMetaData = getMetaInformation;
var lengthOfVideo:Number = 0;
function getMetaInformation(e:Object):void {
lengthOfVideo = e.duration;
trace("Genişlik :" + e.width);
trace("Yükseklik :" + e.height);
/*--------------< Video Meta Bilgileri /
>------------------*/
/*--------------< Videonun Durum Çubuğu
>------------------*/
//may cause problem part
var GraphicsExample :Sprite = new Sprite();
var size:uint = 10;
var bgColor:uint = 0x999999;
var borderColor:uint = 0x999999;
var borderSize:uint = 0;
var cornerRadius:uint = 9;
var gutter:uint = 5;
var dragBar:Sprite = new Sprite();
var halfSize:uint = Math.round(size / 2);
dragBar.graphics.beginFill(bgColor);
dragBar.graphics.lineStyle(borderSize, borderColor);
dragBar.graphics.drawCircle(halfSize, halfSize, halfSize);
dragBar.graphics.endFill();
dragBar.x=201;
dragBar.y=376;
addChild(dragBar);
var drag:Boolean = false;
this.addEventListener(Event.ENTER_FRAME, setDragBar);
function setDragBar(e:Event) {
if (!drag) {
dragBar.x = ((netStr.time / lengthOfVideo) * 429) + 201;
/*--------------< Videonun Durum Çubuğu /
>------------------*/
/*--------------< Videonun Kaydırma Çubuğu
>------------------*/
dragBar.addEventListener(MouseEvent.MOUSE_DOWN,
startDragging);
dragBar.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
dragBar.buttonMode = true;
var rect:Rectangle = new Rectangle(205,378,429,0);
function startDragging(e:MouseEvent) {
drag = true;
netStr.pause();
dragBar.startDrag(false,rect);
function stopDragging(e:MouseEvent) {
dragBar.stopDrag();
drag = false;
netStr.resume();
this.addEventListener(Event.ENTER_FRAME, reSetVideo);
function reSetVideo(e:Event) {
if (drag) {
netStr.seek(Math.floor(((dragBar.x-201) / 429) *
lengthOfVideo ));
/*--------------< Videonun Kaydırma Çubuğu
/ >------------------*/
netStr.addEventListener(NetStatusEvent.NET_STATUS,
netStatusHandler1);
function netStatusHandler1(e:NetStatusEvent):void
switch (e.info.code)
case "NetStream.Seek.InvalidTime":
trace("You have seeked too far ahead, the video hasn't fully
loaded yet");
break;
case "NetStream.Play.StreamNotFound":
trace("Unable to locate video");
break;
/*--------------< Video Ses Kontrolü
>------------------*/
sound_btn.addEventListener(MouseEvent.MOUSE_DOWN, setSound);
var checkSound:Boolean = true;
var soundTrans:SoundTransform = new SoundTransform();
function setSound(e:MouseEvent) {
if (checkSound) {
soundTrans.volume = 0;
checkSound = false;
} else {
soundTrans.volume = 1;
checkSound =true;
netStr.soundTransform = soundTrans;
/*--------------< Video Ses Kontrolü /
>------------------*/
[/code]

Servlet streaming video to client, problem with Movie not loaded.

Ok, I am sorry if this question is beyond the scope of Servlets/Java or J2EE but I figured it was worth a shot:
I have two servlets, one is a very simple class consisting of a doGet which just calls doPost and the doPost which just plucks out a single parameter from the request and prints out some HTML. Here is the code:
     public void doPost(HttpServletRequest request, HttpServletResponse response)
               throws ServletException, IOException {
          String videoDir = request.getParameter("directoryofvideo");
          response.setContentType("text/html");
          PrintWriter out = response.getWriter();
          if (videoDir==null||videoDir.equals("")||!new File(videoDir).exists()) {
               out.println("<script type=\"text/javascript\">alert(\"There was an error locating the selected videos\");</script>");
               //return;
          out.println("<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01 Transitional//EN\">");
          out.println("<HTML>");
          out.println(" <HEAD><TITLE>A Servlet</TITLE></HEAD>");
          out.println(" <BODY>");*/
          out.println("   <object id=\"player1\" width=\"480\" height=\"360\" data=\"/MyApp/serveUploadedFile?url=//ns20/data3/Video/player_flv_maxi.swf\" type=\"application/x-shockwave-flash\">");
          out.println("    <param value=\"/MyApp/serveUploadedFile?url=//ns20/data3/Video/player_flv_maxi.swf\" name=\"movie\"/>");
          out.println("    <param value=\"true\" name=\"allowFullScreen\"/>");
          out.println("    <param value=\"configxml=/MyApp/serveUploadedFile?url=//ns20/data3/Video/1.xml\" name=\"FlashVars\"/>");
          out.println("   </object>");
          out.println(" </BODY>");
          out.println("</HTML>");
          out.flush();
          out.close();
     }In case that is hard to read, the HTML printed is this:
   <object id="player1" width="480" height="360" data="/MyApp/serveUploadedFile?url=//ns20/data3/Video/player_flv_maxi.swf" type="application/x-shockwave-flash">
    <param value="/MyApp/serveUploadedFile?url=//ns20/data3/Video/player_flv_maxi.swf" name="movie"/>
    <param value="true" name="allowFullScreen"/>
    <param value="configxml=/MyApp/serveUploadedFile?url=//ns20/data3/Video/1.xml" name="FlashVars"/>
   </object>The second servlet, appropriately named: serveUploadedFile, reads in from the file off the file system and streams the data back to the client and I know it works because I can hit /MyApp/serveUploadedFile?url=//ns20/data3/Video/player_flv_maxi.swf and get the swf player but if you'd like to see the code I can copy and paste that in here as well.
The problem is by page loads blank, all the html is written but in firebug the only thing actually downloaded to the client is the first swf player, and if I right click in the window it says "Movie Not Loaded" on Firefox, IE and Safari. I have a working example of a video that is hosted on our NAS with the exact same HTML (which is where I got that from) except the swf and xml files appear as just their names because they are in the same directory as the index.html.
Any ideas?
Thank you so much in advance.

Also, I realize the parameter is not being used here that is because in order to eliminate possibilities of the problem I hard coded the path into the println statements and I am sure the path and all the files exist as well ;)

Problem with LILO to loading the OS

Hello everyone.
We have a problem with LILO to loading the OS in a CS-MARS 110R, find attached a screenshot.
The only solution is recovery the MARS Operating System.
Thanks in advance.
Regards
Antonio

Hi Matthew.
The re-image was impossible because this CS-MARS didn´t read the DVD correctly (hardware error) and we asked to Cisco a RMA.
Thanks
Antonio

Problem with whitespace then loading and saving xml

i do not know how to handle this problem. i modifed a texteditor to send XML to a server and load XML back to the container.
but then i do changes to the Textlayout it shows up like this --->
Text in Container not modifed
Text in Container modifed ---> with space beween the colorchanged string
Text inContainersend and loaded ---> i think this has something to to with the
TextFilter.export(_textFlow,TextFilter.TEXT_LAYOUT_FORMAT,ConversionType.XML_TYPE)
can someone give me a hint...

Hi,
the link is --->
http://www.horstmann-architekten.de/contentmanagment/SimpleEditor.html
its a modified example of the texteditor provided by Adobe. You can send a xml to the server. and also read it from the server. You just use the xml identifer to give the xml a name.
Try it out:
1. change the text and
2. give a XML-Identifer
   and then send it to the server. --> send to server
3. type in the XML-Identifer you have used and
4.   load it from the server ---> Load from Server Button
evering works ok exept the columns formating.
I Think the colums Formating is not embeded in the XML as it should be. I attached the Files. (Newbie programmer)
With best regards
Michael Sprinzl
--- robin.briggs <[email protected]> schrieb am Do, 17.9.2009:
Von: robin.briggs <[email protected]>
Betreff: Problem with whitespace then loading and saving xml
An: "Michael sprinzl" <[email protected]>
Datum: Donnerstag, 17. September 2009, 2:12
Sounds like you have two different issues going on: (1) inline graphics aren't coming out correctly when you use the TextLineFactory, and (2) columns aren't working correctly. It's difficult for me to tell by looking at the application you link what is going wrong. One of the examples does seem to have columns working -- can you be more specific about what you're doing, and what results you are seeing? As for the inline graphics, there is a timing issue involved with using URLs, due to the asynchronous loading. See this comment in the docs for TextFlowTextLineFactory:
Note: When using inline graphics, the source property of the InlineGraphicElement object   must either be an instance of a DisplayObject or a Class object representing an embedded asset.   URLRequest objects cannot be used. The width and height of the inline graphic at the time the line   is created is used to compose the flow.
- robin

Problems with error-page in web.xml and page caching

Having a few problems with error pages and web.xml with browsers caching the error pages and strange errors coming out of weblogic.servlet.intenal.WebAppServletContext
I'm trying to set a web app up so that all http errors and all exceptions are routed thruogh predefined resources. For now, I'm simply send 400 errors to 400.html and the ServletException, IOException and RuntimeException to respective html pages.
What I'm finding is that the error codes work fine but the exceptions are only be routed to the correct error page for the first call to the servlet after server restart.
So for example, I have my servlet throwing a ServletException as a test case. The weblogic server log shows that ServletException is thrown, and the correct error page for ServletExceptions is shown.
If I change the Servlet code to throw IOException in place of SevletException, the weblogic.log shows that IOExceptyion is being thrown (so the servlet has deployed successfully), however the Servletxception error page is shown on the browser.
I'm using IE6 and I've changed the setting such that a new page is requested every time using the tools-internet options-temp internet files-settings option to "check for new versions of stored pages: Every visit to the page".
Despite this, the servlet exception error page still appears.
If you clear the cache from the temp intenet files->delete files IE option, the correct errror page will be shown so it appears that the browser cache is being used after all.
everytime I delete the temp intenet files I get the correct error page on the first request after but then not after that.
I have implemented the service method for this test to throw the exceptions - does this make a differecne?
As a test, I have moved the imlpementation to the doGet method instead bu I now get a strange eror from weblogic comlpaining about an arrayOutOfBoundsException because eror codes in the web.xml are not supported! - see error above.
Any help is appreciated

After further investigation: -
There are no problems with error pages based on error codes, only error exceptions.
As a test case, I have a service method in a servlet throwing either one of the three exception types that servlets can throw (Runtime, Servlet & IO) the following rules apply. The exception to be thrown is hardcoded and is changed and the web app rebuilt each time. The correct web.xml has been deployed to the app server (checked through console). the webapp is being redeployed correctly - this can be seen in the weblogic log, where the correct exception is reported.
I am using WLS 8.1, Servlet 2.3, JDK 1.4.1_02
In all cases, the weblogic log reports that the servlet is throwing the exception as expected.
Despite having set error-page for exception javax.servlet.ServletException, the exceptions are diverted to the error page that has been set up for http error code 500
The error page for ServletException is therefore never reached.
I have the browser set to request pages every time it is asked.
Once the servlet has thrown an IOException, the only way to get the browser to report an IO or Runtime exception error-page is to clear the browser cache. Restarting the server has no effect.
Once the servlet has responded with ANY exception, it is not possible to get it to report a ServletException (which is incorrectly reported as a 500 anyway) unless the cache is cleared. Restarting the server has no effect.
In the case where the servlet throws ServletException, it has no root exception. The servlet 2.3 spec states that if ServletException is thrown but cannot be found in the error pages, the root excpetion will be extracted and the error page list traversed again. Knowing that the RuntimeException error page is correct shown when RuntimeException is throwm, I have nested this inside the ServletException, however error page for http error 500 is still shown.
I don't believe this is a WLS 8.1 problem, as the console shows that the correct exception is thrown each time. this is backed up by the fact that the correct exception page is thrown when the cache is cleared regardless of what exception was previousdly thrown by the servlet. This excludes ServletException which is always incorrectly thrown as a 500.

How can I fix this problem with exporting Pages files?

Hello,
I'm having problems with exporting Pages files to Word or PDF (I haven't tried the other formats). Whenever I try to export the Page file, I get one message like this: "The document "XXXXXXX" could not be exported as "YYYYYYY". This problem started after the last Pages update, before that it was working fine. I restarted the computer, updated the OS, but the problem hasn't been solved.
Does anyone know how to fix this problem?
Thank you in advance!
Best regards,
Filipe

Computers are made of parts made by humans and assembled by humans of materials that are not perfect.
For example, a display cable that was accidentally pinched during assembly would pass quality control testing with flying colors and would not fail until the lid had been opened and closed several times.
Likewise a display might not fail until powered on and off a few hundred times.

I have a problem with searching page, whenever i try to open any page a blank paper cums appear only written custom search google in English

i have a problem with searching page, whenever i try to open any page a blank paper cums appear only written custom search by google this one is not such as my google home page
== This happened ==
Not sure how often
== i use to search any page like movies or etc

Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

I still am having problems with Aperture not loading, It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post wont work as it

I still am having problems with Aperture not loading, It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post doesn't work as it is for Ver 10.6.6 and I am running 10.6.7

Do you have Final Cut installed on your machine?
If so, you may want to look at this article: http://support.apple.com/kb/TS3528
Let us know if that helps.

Problem with initial page load

Similar Messages

Maybe you are looking for