Problem with "Insert" and "Overwrite Sequence Content"

I'm working with XDCAM footage. I like to take all the individual clips recorded on the XDCAM disc, and after getting them into FCP, taking them and putting them all in a sequence in FCP, then using that sequence as the source in the Viewer. This allows for quick scanning of all the clips, much as is it were a digitized tape.
I recently found the "Insert Sequence Content" and "Overwrite Sequence Content" commands in FCP, and like them in that they actually put the individual clips into my project timeline, and not just the combined sequence (which looks more or less like a nest when dropped into my project sequence).
Here's the problem: When I put IN and OUT points in the timeline, and "Insert or Overwrite Sequence Content" using the sequence containing all the clips, the video tends to be contained to between the IN and OUT points I set in the TIMELINE, but the audio tracks tend to expand past the OUT point I set in the TIMELINE, and I can't figure out why, or how to get around this.
Any assistance would be appreciated.

If you're inserting or overwriting, you're basically pasting the content that you've chosen. I wouldn't think the out point would be recognized, or even wanted. If you copied 5 minutes of clips and inserted it into a sequence with a 4 minute in/out point duration, do you want to only have the first 4 minutes inserted into the sequence? If you only place an in point, it will insert all the clips, starting at that point, and it will take up as much time as the clip content's duration.
Am I missing something here?

Similar Messages

Problem with Sections and Table of Contents

I have just purchased pages. Both my iMac and MacBook have Lion. I do not have the "sections" button on the toolbar. When I open the "inspector" and try to insert a Table of Contents, the "paragraph styles" pane is empty. How can I correct these problems as I would like to use pages for a family story

You have started your document with a Page Layout template. TOC doesn't work with text boxes. You need to use a Word Processing document and have the text in the main text layer.
In the New from Template Chooser you can see the types in the left side bar.

I am having problems with video and high content webpages freezing. I am also getting pixel lines across my webpages. Maybe two or three lines. I was running os 10.4 but I just up graded to 10.6 the other day. I have 2GB of RAM.

I am having problems with video and high content webpages freezing. I am also getting pixel lines across my webpages. Maybe two or three lines. I was running os 10.4 but I just up graded to 10.6 the other day. I have 2GB of RAM.

Exactlly which model iMac do you have?
see > How to identify iMac models
Unfortunately that is not all that uncommon for the Early Intel iMac's given there age and the fact that the air intakes are probably choked with dust. Then add the extra heat caused by running a more intense OS X which is causing it to run a little warmer than normal and putting extra stress on the graphic and display components.
My 6½ year old 17" Early 2006 Core Duo w/2GB of RAM is also running 10.6.8 and is also starting to get a single line that (knock on wood) goes away after a few minutes, while many others started getting permanent ones after 2 or 3 years. One thing that I think has helped, is that about every 3 or 4 months I shutdown and vigorously vacuum out the bottom grill work and small vent under the stand to keep it running cool.
On that note: unfortunately I can only suggest that you clean your intake vents and hope that no permanent or irreversible damage has been done.

Problem with trigger and entity in JHeadsart, JBO-25019

Hi to all,
I am using JDeveloper 10.1.2 and developing an application using ADF Business Components and JheadStart 10.1.2.27
I have a problem with trigger and entity in JHeadsart
I have 3 entity and 3 views
DsitTelephoneView based on DsitTelephone entity based on DSIT_TELEPHONE database table.
TelUoView based on TelUo entity based on TEL_UO database table.
NewAnnuaireView based on NewAnnuaire entity based on NEW_ANNUAIRE database view.
I am using JHS to create :
A JHS table-form based on DsitTelephoneView
A JHS table based on TelUoView
A JHS table based on NewAnnuaireView
LIB_POSTE is a :
DSIT_TELEPHONE column
TEL_UO column
NEW_ANNUAIRE column
NEW_ANNUAIRE database view is built from DSIT_TELEPHONE database table.
Lib_poste is an updatable attribut in TelUo entity, DsitTelephone entity, NewAnnuaire entity.
Lib_poste is upadated in JHS table based on TelUoView
I added a trigger on my database shema « IAN » to upadate LIB_POSTE in DSIT_TELEPHONE database table :
CREATE OR REPLACES TRIGGER “IAN”.TEL_UO_UPDATE_LIB_POSTE
AFTER INSERT OR UPDATE OFF lib_poste ONE IAN.TEL_UO
FOR EACH ROW
BEGIN
UPDATE DSIT_TELEPHONE T
SET t.lib_poste = :new.lib_poste
WHERE t.id_tel = :new.id_tel;
END;
When I change the lib_poste with the application :
- the lib_poste in DSIT_TELEPHONE database table is correctly updated by trigger.
- but in JHS table-form based on DsitTelephoneView the lib_poste is not updated. If I do a quicksearch it is updated.
- in JHS table based on NewAnnuaireView the lib_poste is not updated. if I do a quicksearch, I have an error:
oracle.jbo.RowAlreadyDeletedException: JBO-25019: The row of entity of the key oracle.jbo. Key [null 25588] is not found in NewAnnuaire.
25588 is the primary key off row in NEW_ANNUAIRE whose lib_poste was updated by the trigger.
It is as if it had lost the bond with the row in the entity.
Could you help me please ?
Regards
Laurent

The following example should help.
SQL> create sequence workorders_seq
2 start with 1
3 increment by 1
4 nocycle
5 nocache;
Sequence created.
SQL> create table workorders(workorder_id number,
2 description varchar2(30),
3   created_date date default sysdate);
Table created.
SQL> CREATE OR REPLACE TRIGGER TIMESTAMP_CREATED
2 BEFORE INSERT ON workorders
3 FOR EACH ROW
4 BEGIN
5 SELECT workorders_seq.nextval
6    INTO :new.workorder_id
7    FROM dual;
8 END;
9 /
Trigger created.
SQL> ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH24:MI:SS';
Session altered.
SQL> insert into workorders(description) values('test1');
1 row created.
SQL> insert into workorders(description) values('test2');
1 row created.
SQL> select * from workorders;
WORKORDER_ID DESCRIPTION                    CREATED_DATE
           1 test1                          30-NOV-2004 15:30:34
           2 test2                          30-NOV-2004 15:30:42
2 rows selected.

Problem with IE and pubblishedIntoWall

Hi to all,
   i have a problem with InternetExplorer and CallBack
In my flex code i have :
flash.external.ExternalInterface.addCallback("pubblishedIntoWall", pubblishedIntoWall);
The javascript code:
function pubblishedIntoWallCarrello() {
        document.getElementById("composer").pubblishedIntoWall(1)
In both Firefox and Chrome the javascript works in the right way.
In internet explorer the function pubblishedIntoWall is not called.
Have some one got an idea of this problem?
Thanks for your time

First of all, thank for your reply
This is the code that i use in the HTML, i use   allowScriptAccess = sameDomain
----------- CODE -------------------
<div id="divContainercomposer" style="position:absolute;left:50%;top:0px;width:930;height:100%;margin-left:-465px">
            <script language="JavaScript" type="text/javascript">
            
            </script>
            <noscript>
                  <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
                        id="flashContent" width="930" height="100%"
                        codebase="http://fpdownload.macromedia.com/get/flashplayer/current/swflash.cab">
                        <param name="movie" value="composer.swf" />
                        <param name="quality" value="high" />
                        <param name="bgcolor" value="#ffffff" />
                        <param name="allowScriptAccess" value="sameDomain" />
                        <embed src="composer.swf" quality="high" bgcolor="#ffffff" id="composer"
                            width="930" height="100%" name="composer" align="middle"
                            play="true"
                            loop="false"
                            quality="high"
                           allowScriptAccess="sameDomain"
                            type="application/x-shockwave-flash"
                            pluginspage="http://www.adobe.com/go/getflashplayer">
                        </embed>
                </object>
            </noscript>
</div>

Problems with Safari and Firefox (HTTP?)

Problems with Safari and Firefox (HTTP?)
On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
and
defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
but that did not help,
Nanne

I'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled

Problem with ADS and LDAP

Problem with ADS and LDAP
I have installed Win2000 + sp1 and ADS on a computer. This computer is PDC.
After connection via LDAP I cann't get any object ( users or goups etc. ).
I try connect to ADS by java ( JNDI ).
When I use another clients of LDAP ( eg. Maxware Directory Explorer) I have
the same problem - no objects.
Can anybody help me?
Grzegorz Pszona
my e-mail: [email protected]

Thanks a lot.
Softerra's browser is really good.
Thanks
Rashmi
"Anant Kadiyala" <[email protected]> wrote:
>
I used Softerra's LDAP browser. The browser is free. There is also a
java baded
LDAP browser from Univ of Michigan. I found the Softerra browser to be
more easier
to use.
-anant
"rashmi" <[email protected]> wrote:
Hi,
Can you please let me know which exact ADS tool that you used to examine
the
DN. I have Active Directory Users and Computers, Sites and Servicesand
Domain
and Trusts installed on my machine but I am not able to figure out how
to get
the DN?
Thanks
Rashmi
for Stephen Davies <[email protected]> wrote:
Grzegorz,
I have had WLS6.1 & ADS working ok using LDAP V2. Mind you it did take
a
fair bit of messing around to get it going. MS does have a few oddities,
for example the Administrators DN might look something like this:
cn=Administrator,cn=Users,dc=eglobal,dc=net
One tool that I found invaluable came with the additional support tools
for Windows 2000. The 'Active Directory Administration Tool' made it
easy to list the directory contents and examine the DNs.
Regards,
Steve
Stephen Davies
Principal Consultant
eGlobal Services Pty. Ltd.
Sydney, Australia
Ph. +61 2 9283 1033
http://www.eglobal.net/

Problem with dreamweaver and Flash

Hi, maybe someone can help me, i have any problem with
dreamweaver and flash, i have a page and i have a menu and
sub-menu, and the same page i have a category en flash 550 x 700 (
photography and more... ) but when the menu to unfold
the menu to see under flash and it cant see ( sorry my
english is bad.... i hope you can understand me, and help me.. )
i dont now why always flash ever stay up, or first, and
another information under flash... this a problem... if you have
menus...
thanks.... have nice day.....

This is a drawback of using flash or any other active
content. By default, all active content including flash will
display over every other content and thats why your menu stays
under the flash movie. Some people make the flash background
transparent to show content under the flash movie, but that will
not work for menu items.
I would suggest that you make the menu such that it does not
overlap with the flash movie.

Problem with ECS and XSD

Hi B2B Gurus,
We are facing the problem with ECS and XSD files from past 2 weeks, Steps we followed
1. Created a ECS file in document editor version 11g: 6.6.0
2. ECS files consists only from ST and SE segments
Ex: ST
BCH
CUR
REF
PER -- Exclude
TAX -- Exclude
SE
3: Generated a XSD file from ECS file( File --> export---> Oracle B2B) in document ediotr
4. We imported a ECS and XSD file in B2B console( documents---docdef-transaction set ECS file) and XSD File
5. We tested one file from manually we face below error:
Error Code B2B-51507
Error Description Machine Info: (usmtnz-dinfap19.dev.emrsn.org) Description: Payload validation error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text
and some times it shows Guideline load Error or simply Error
Please help us to resolve this
Regards

Anuj,
We are sending the EDI XML file from backend, then B2B will convert it into EDI file, How can we analyze EDI XML file with ECS file, B2B is not converting to EDI.
1. Can we use 10g ECS file and XSD file in 11G
2. I tried to import it, but it showing below error while doing testing
App Message property     {MSG_ID=90422086, Sequencing=false, DOCTYPE_REVISION=5020, MSG_TYPE=1, FROM_PARTY=EMERSON, DOCTYPE_NAME=850, TO_PARTY=APLL, ATTACHMENT=}
Direction     OUTBOUND
State     MSG_ERROR
Error Code     B2B-51507
Error Text     Error Brief : The element does not include any significant data.
Error Description     Error : The Element PER02 does not include any significant data characters. Segment PER is defined in the guideline at position 3600.{br}{br}This error was detected at:{br}{tab}Segment Count: 11{br}{tab}Element Count: 2{br}{tab}Characters: 5395 through 5397
Created Date     06/20/2011 02:52 PM
Modified Date     06/20/2011 02:52 PM
Note: I used the same files in 10G its working fine.
Regards
Edited by: Francis on Jun 20, 2011 10:48 AM

Problem with Roles and Triggers

I'm having a strange problem with Roles and Triggers in Oracle. It's a little difficult to describe, so bear with me...
I'm trying to create a trigger that inserts records into a table belonging to a different user/owner. Of course, the owner of this trigger needs rights to insert records into this other table. I find that if I add these rights directly to the owner of the trigger, everything works okay and the trigger compiles successfully.
However, if I first create a Role and grant the "insert" rights to it, and then assign this role to the owner of the trigger, the trigger does not compile successfully.
To illustrate this, here's an example script. I'm using Oracle 10g Release 2...
-- Clean up...
DROP TABLE TestUser.TrigTable;
DROP TABLE TestUser2.TestTable;
DROP ROLE TestRole;
DROP TRIGGER TestUser.TestTrigger;
DROP USER TestUser CASCADE;
DROP USER TestUser2 CASCADE;
-- Create Users...
CREATE USER TestUser IDENTIFIED BY password DEFAULT TABLESPACE "USERS" TEMPORARY TABLESPACE "TEMP" QUOTA UNLIMITED ON "USERS";
CREATE USER TestUser2 IDENTIFIED BY password DEFAULT TABLESPACE "USERS" TEMPORARY TABLESPACE "TEMP" QUOTA UNLIMITED ON "USERS";
CREATE TABLE TestUser.TrigTable (TestColumn VARCHAR2(40));
CREATE TABLE TestUser2.TestTable (TestColumn VARCHAR2(40));
-- Grant Insert rights on TestTable to TestRole...
CREATE ROLE TestRole NOT IDENTIFIED;
GRANT INSERT ON TestUser2.TestTable TO TestRole;
-- Add TestRole to TestUser. TestUser should now have rights to INSERT on TestTable
GRANT TestRole TO TestUser;
ALTER USER TestUser DEFAULT ROLE ALL;
-- Now, create the trigger. This compiles unsuccessfully...
CREATE TRIGGER TestUser.TestTrigger AFTER INSERT ON TestUser.TrigTable
BEGIN
INSERT INTO TestUser2.TestTable (TestColumn) VALUES ('Test');
END;
When I do a "SHOW ERRORS;" after this, I get:
SQL> show errors;
Errors for TRIGGER TESTUSER.TESTTRIGGER:
LINE/COL ERROR
2/3 PL/SQL: SQL Statement ignored
2/25 PL/SQL: ORA-00942: table or view does not exist
SQL>
As I said above, if I just add the Insert rights directly to TestUser, the trigger compiles perfectly. Does anyone know why this is happening?
Thanks!
Adrian

Hi Raghu,
If the insert rights exist only on TestRole, and TestRole is assigned to TestUser, I can do the INSERT statement you suggest with no problems if I just execute it from SQLPlus (logged in as TestUser).
The question is, why does the same INSERT fail when it's inside the trigger?

Problem with connecting and syncing (quicktime.qts)

Hi,
I have a problem with connecting and syncing my Iphone to itunes.
iphone alone on PC -> uploading files (fotos) is possible
itunes starts normaly, if iphone is not conected.
if i connect iphone after starting itunes, or if i start itunes after connecting iphone i get an itunes-error with message:
AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
ModVer: 7.65.17.80 Offset: 00909a47
i test different things...
- used another USB-port
- used another PC
- used macbook of my wife instead PC
- deinstalled and new installed of itunes (older and newer versions) folow tutorials of apple
- use another USB-Cable...
I'm resigned, Please help me..
Tom

AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
In this context, that can sometimes indicate trouble with a content file on the phone (or Touch).
Do you have any podcasts stored on the iPhone at the moment? If so, if you delete them from the phone, can you connect to iTunes without the error?

Problem with navigation and masthead by changing languages with Anonymous

Hi All,
i have a problem with navigation and masthead by changin the language when accessing as anonymous user.
Ive created two additional users anon_de (with language german )and anon_en (for english).
I've created also two links in the in masthead:
/irj/portal/anonymous?guest_user=anon_en and /irj/portal/anonymous?guest_user=anon_de
When i choose "de" for the first time it works fine, but when i choose "en" again the language in the content are is changing to english again, but not in navigation and masthead. When i click again on link for "en" the languge is set to english. Strange thing is that when i click on "de" instead the portal content change to german but masthead and navigation are in english now, as it should be before....
It seems that masthead and navigation have always prevoius language selected.
Do you know, what could be the reason of that strange behavior?
Thanks for help
Karol

Hi Detlev,
you are right. the user is not "updated" fast enough... the strange thing is, that it works by the first time i change the language...
well.. i can implement that workaround as you suposed, but it would be a really workaround as the same page will be requestes second time, causing requests number to be double..
Thanks for help
ps. i forgot to mark this message as question to give points.. if you tell me how i can change that ill reward your answer..

Problem with XMLTABLE and LEFT OUTER JOIN

Hi all.
I have one problem with XMLTABLE and LEFT OUTER JOIN, in 11g it returns correct result but in 10g it doesn't, it is trated as INNER JOIN.
SELECT * FROM v$version;
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE     11.2.0.1.0     Production"
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
--test for 11g
CREATE TABLE XML_TEST(
     ID NUMBER(2,0),
     XML XMLTYPE
INSERT INTO XML_TEST
VALUES
     1,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g1</id>
                         <dat>data1</dat>
                    </fields>
               </data>
          </msg>
INSERT INTO XML_TEST
VALUES
     2,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g2</id>
                         <dat>data2</dat>
                    </fields>
               </data>
          </msg>
INSERT INTO XML_TEST
VALUES
     3,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g3</id>
                         <dat>data3</dat>
                    </fields>
                    <fields>
                         <id>g4</id>
                         <dat>data4</dat>
                    </fields>
                    <fields>
                         <dat>data5</dat>
                    </fields>
               </data>
          </msg>
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x LEFT OUTER JOIN
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )y ON 1=1
ID     DAT     SEQNO     ID_REAL
1     data1     1     g1
2     data2     1     g2
3     data3     1     g3
3     data4     1     g4
3     data5          Here's everything fine, now the problem:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
"CORE     10.2.0.1.0     Production"
TNS for HPUX: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
--exactly the same environment as 11g (tables and rows)
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x LEFT OUTER JOIN
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )y ON 1=1
ID     DAT     SEQNO     ID_REAL
1     data1     1     g1
2     data2     1     g2
3     data3     1     g3
3     data4     1     g4As you can see in 10g I don't have the last row, it seems that Oracle 10g doesn't recognize the LEFT OUTER JOIN.
Is this a bug?, Metalink says that sometimes we can have an ORA-0600 but in this case there is no error returned, just incorrect results.
Please help.
Regards.

Hi A_Non.
Thanks a lot, I tried with this:
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x,
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )(+) y ;And is giving me the complete output.
Thanks again.
Regards.

Problem with comma and point

Hello,
I have a problem with comma and point in a double-digit.
I use a english driver for HM8142. When I get the values then I only get
int-digits. How can I change "Use comma as separator" . I tried to change
the option in LabVIEW.
I changed it, then I got the window. "To change, restart the programm". I
have done this. But when I have a look at the option, it is not changed.
What can I do?
I am not the admin on the computer.
Martin

Hi Martin,
you do not have to change any system settings neither in LabVIEW nor in your windows.
All instrument drivers should use a point as decimal separator. You can overwrite the decimal point handling in the string functions "Scan from string" and "Format into string".
Make a right click on the function and use "Edit Scan String". In the dialog open the ring under "Selected operation", the last entry allows you to set the character for the decimal separator. This separator will be used for all the following floating point numbers.
From your name and problem I think you are located in central europe. I do not have a german version of LV so I cannot tell you how the elements are named in german.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Problem with PropertyChangeListener and JTextField

I'm having a problem with PropertyChangeListener and JTextField.
I can not seem to get the propertychange event to fire.
Anyone have any idea why the code below doesn't work?
* NewJFrame.java
* Created on May 15, 2005, 4:21 PM
import java.beans.*;
import javax.swing.*;
* @author wolfgray
public class NewJFrame extends javax.swing.JFrame
implements PropertyChangeListener {
/** Creates new form NewJFrame */
public NewJFrame() {
initComponents();
jTextField1.addPropertyChangeListener( this );
public void propertyChange(PropertyChangeEvent e) {
System.out.println(e);
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {
jTextField1 = new javax.swing.JTextField();
jScrollPane1 = new javax.swing.JScrollPane();
jFormattedTextField1 = new javax.swing.JFormattedTextField();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
jTextField1.setText("jTextField1");
getContentPane().add(jTextField1, java.awt.BorderLayout.NORTH);
jFormattedTextField1.setText("jFormattedTextField1");
jScrollPane1.setViewportView(jFormattedTextField1);
getContentPane().add(jScrollPane1, java.awt.BorderLayout.CENTER);
pack();
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new NewJFrame().setVisible(true);
// Variables declaration - do not modify
private javax.swing.JFormattedTextField jFormattedTextField1;
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JTextField jTextField1;
// End of variables declaration
}

If you want to listen to changes in the textfield's contents you should use a DocumentListener and not a PropertyChangeListener:
http://java.sun.com/docs/books/tutorial/uiswing/events/documentlistener.html
And please use [co[/i]de] tags when you are posting code (press the code button above the message window).

Problem with "Insert" and "Overwrite Sequence Content"

Similar Messages

Maybe you are looking for