Problem with IPhone4, maybe you have the same!! (related to Micro SIM Slot)

Hi,
I have bought Iphone 4 from "Carphonewarehouse" and when I got back home and after I put the micro sim card I shook the Iphone (it is my habit to check if a device properly assembled)
then I heared sound as if something lose inside, when I tried to figure out I found that the small part, which used to push the Sim out of the slot, is moving so it creates that sound
So please is that with everyone or just my mobile? let me now so that I can ask for replacement.
Regards,

Many thanks for your kind reply. Of course, that's common sense but if some have and others haven't,it means something has to be checked, otherwise if that resulted in other problem I would have no right to complain since that might be considered abuse.
So please I still need real cases whether this problem exists in all Iphones 4 or not.
Regards,

Similar Messages

Everytime I try to start FaceTime it says: "There has occured a problem with FaceTime. You have to stop FaceTime and start it again" What can I do about this?

Everytime I try to start FaceTime it says: "There has occured a problem with FaceTime. You have to stop FaceTime and start it again" What can I do about this?

Same problem as well as the network failure. Apple Care was suggesting a full reinstall and I declined. I thought it worked once but I can't be sure ... it might have been Skype which works perfectly.

3 year old iMac 24 running OS10.7.4. After it has been on for a day or so, it stops going to sleep and becomes very slow. This only happens when Safari is running. Quitting Safari solves the problem. Has anyone else have the same problem?

3 year old iMac 24 running OS 10.7.4. After it has been on for a day or so, it stops going to sleep and becomes very slow. This only happens when Safari is running. Quitting Safari solves the problem. Has anyone else have the same problem? Does not happen on MacBookpro only on iMac.

Hello Albert, see how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?

If i buy a movie in itunes, the movie will be avaliable on my iMac and my computer with itunes? They have the same ID Apple...

if i buy a movie in itunes, the movie will be avaliable on my iMac and my computer with itunes? They have the same ID Apple...

Once the movie has completey download, having an Internet connection is no longer necessary. It would be wise to test the movie before you leave, though, in case of glitches.
Regards.

How do i get a engraving on my iphone4 if you have the iphone right now

how do i get a engraving on my iphone4 if you have the iphone right now

You find a local shop that does it, not Apple store-they don't.
It might also void your warranty.

Aperture replaces images with other images that have the same image number

Help! Aperture has started replacing images in recent projects with older images from elsewhere on my hard drive that have the same image number. Obviously I need a better numbering system, but can someone help me figure out why this is happening? I store master files on an external drive and the "replacement" files seem to be coming from identically named images on my local HD or in iPhoto.

I started renaming all of my images when I import them. I'm using referenced images to an external drive, although I still have a bunch of older images stored in the Aperture library under my old numbering system (which was basically whatever image number the camera generated)....need to move them all to the external drive but haven't had time.
So here's the latest problem: Today, Aperture started replacing images in albums (referenced images with unique file names under my new system) with old images even though the file names weren't even remotely close. It also replaced the images with the preview for the old image (230 pixels wide). "Show master" showed me the preview for the old image, not the correct image.
I tried forcing an update to the preview, but it had no effect. The real masters are intact on the external drive, but this is really scaring me. It happens out of the blue, right in front of me...I watch as my images appear to be replaced with random old images in Aperture. It appears to have nothing to do with file names, as I'm now using totally unique file names.

Problem with UITableViewCell, can´t add the same custom cell

Hi,
I have a table view which I populate the cells with a UITableView class that i wrote. This custom class has two labels and a image view. In the method cellForRowAtIndexPath, i use the following code:
[cell addSubview:myTableViewCellClass];
the first cell is ok, the cell displays my custom cell. But the second cell can´t display the same custom cell object. Is there something I can do to avoid this problem?
I have another problem. When i scroll my table view very fast, the program crashes with the following message:
[Session started at 2008-08-24 18:30:10 -0700.]
Loading program into debugger…
GNU gdb 6.3.50-20050815 (Apple version gdb-960) (Sun May 18 18:38:33 UTC 2008)
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i386-apple-darwin".warning: Unable to read symbols >for
"/System/Library/Frameworks/UIKit.framework/UIKit" (file not found).
warning: Unable to read symbols from "UIKit" (not yet mapped into memory).
warning: Unable to read symbols for "/System/Library/Frameworks>/CoreGraphics.framework/CoreGraphics" (file not
found).
warning: Unable to read symbols from "CoreGraphics" (not yet mapped into memory).
Program loaded.
sharedlibrary apply-load-rules all
Attaching to program: `/Users/pitteri/Library/Application Support/iPhone
Simulator/User/Applications/9F7BD517-CB1E-49C5-BD30-24831239120F/OndeEstou.app/O ndeEstou', process 11209.

This is not the correct method for using custom table cells with a table. You need to create a custom cell class that extends UITableViewCell. This class should handle the layout and display for the content of a single cell.
In your table view delegate's 'cellForRowAtIndexPath' method, you create or obtain an instance of your custom cell, configure the cell by setting the title or other properties appropriate for you custom cell, then return the cell. That's it.
It appears, from your code, that you are trying to add the table view cell class to the cell. Maybe you mistyped. But don't call 'addSubview' on anything within the table view delegate.
Have a look at the UICatalog example app. It has several custom table cells and shows both how to implement a custom cell, but also how to use it in a table.
Enjoy.

Problems with multiple TestStand versions on the same computer

I installed LabVIEW 2014 and TestStand 2014; then later I installed TestStand 2010 SP1 and have been using it since. (I also updated LabVIEW 2014 to 14.0f1; I think I did that after installing TestStand 2010 SP1.) Is this "legal?" I have been seeing strange behavior with TestStand 2010 SP1:
- if I type in any expression text boxes in the Sequence Editor (e.g., for a pre-expression), I periodically get an error dialog as I type:
"The .NET support dll could not be loaded. This is caused by an assembly path that could not be resolved. Error Code: -18700, The .NET support dll could not be loaded. This is caused by an assembly path that could not be resolved! Source: 'TSAPI'
After I acknowledging the dialog, I can contine to type a little more before getting the dialog again, but it doesn't seem to invalidate anything I type.
- If I open the Simple LabVIEW Simple User Interface that ships with TestStand 2014 while TestStand 2010 SP1 is active, LabVIEW immediately crashes. I can open all the subVIs without a problem, but the top-level VI always crashes LabVIEW.
So I used the TestStand Version Switcher to make TestStand 2014 active, opened the top-level Simple UI VI, and deleted all the UI controls. Then I switched back to TestStand 2010 SP1, and then I was able to open the top-level VI. I added back the TestStand UI controls to the VI, and now the VI runs. But many operations return a TestStand error dialog, such as Close Execution ("Value invalid or out of range [Error Code: -17300]"), Logout ("Cannot find item to select in ComboBox [Error Code: -2147467259]"), and (critically) Exit ("Operation Failed. Error Code: -17500]") and the X in the upper right corner of the window ("Operation Failed. Unknown System Error in <VI name>"). So I can't exit without killing LabVIEW.
These two issues may be unrelated. But maybe installing an older version of TS after installing a newer version is not a valid use case? Is the ActiveX error a result of this? Should it be possible to use a (simple) UI written for a newer version of TestStand be able to work with an older version of TestStand?
I have another issue that is probably unrelated, but I'll bring it up here just for completeness. If I right-click on a LV property node or invoke node for a property or method from the TS API and ask for help for the property or method, a command window flashes briefly before showing the TS help window with the top-level item selected (i.e., it doesn't take me to the help for the selected property or method). I have this problem with either version of TS active, and I saw this problem even before I installed TS 2010 SP1. I seem to recall having this problem once before, but I can't find the solution. I don't know if this problem is an indication of some other larger problem.
For what it's worth, I am running WIndows 8.1 on a virtual machine.

Thanks for the information, Doug. Maybe the ActiveX error dialog I get while in the sequence editor is related to the fact that I'm running an unsupported operating system.
So using a UI that was created in a newer version of TS is not supposed to be able to run with an older version of TS. Is there any way to enforce this (like having a dialog appear informing you of the incompatibility when the TS engine is loaded) and avoid an immediate crash? (Maybe the crash has to do with the incomaptible OS as well.)
Is there a way to "relink" a UI to an older version of TestStand? Can you just relink all the ActiveX reference controls/constants to the TS ActiveX servers? As far as I can tell, everything I am trying to do with the new TS version should work with the old version. And also, as far as I can tell, the TS version switcher changes the version of the available ActiveX server; so unless my UI uses a feature unavailable in older TS versions, I would think it shouldn't know the difference. (I'm making a lot of assumptions in that last statement, so I may be totally wrong here.)
Thanks,
Jeff

Problem with multiple Ajax calls to the same Servlet

Hi,
I am new to AJAX. I have a requirement where in, i have to make ajax calls to the same servlet in an infinite loop and check for an application context attribute to refresh the contents in the JSP.I am using the following script in JSP. The problem is i am not able to invoke the servlet more than one time.But I am able to go through the script at specific time interval using setInterval() function of Javascript and able to get alerts.But the problem is with xmlhttp.open("Get", url, true);. Its not getting called more than one time, even though i make multiple calls to the function.
*<script type="text/javascript">*
var xmlhttp
var resp
function fAjax()
alert("Here");
xmlhttp=null;
resp=null;
// code for Mozilla, etc.
if (window.XMLHttpRequest)
xmlhttp=new XMLHttpRequest();
// code for IE
else if (window.ActiveXObject)
xmlhttp=new ActiveXObject("Microsoft.XMLHTTP");
if (xmlhttp!=null)
xmlhttp.onreadystatechange=state_Change;
xmlhttp.open("GET","/PSAPBackOffice/TestServlet",true);
xmlhttp.send(null);
else
alert("Your browser does not support XMLHTTP.")
function state_Change()
// if xmlhttp shows "loaded"
if (xmlhttp.readyState==4)
// if "OK"
if (xmlhttp.status==200)
     resp=xmlhttp.responseText;
     //alert(resp);
     if (resp=="CALL"){
     form.method="GET";
     form.action="/Project/Details.jsp
form.submit();
else
alert("Problem retrieving XML data")
function callTimer(){
     setInterval("fAjax()",5000);
*</script>*
*Code for Servlet here:*
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException
ServletContext objContext= getServletContext();
     String value;
     synchronized (objContext) {
               value=(String) objContext.getAttribute("Flag");
                    if(value==null){
                    else if(value.equals("Done")){
                         response.setContentType(CONTENT_TYPE);
                         PrintWriter out = null;
                              try {
                                   out = response.getWriter();
                              } catch (IOException e) {
                                   // TODO Auto-generated catch block
                                   e.printStackTrace();
                                                            } catch (NullPointerException npe) {
                                   // TODO Auto-generated catch block
                                   npe.printStackTrace();
                         objContext.setAttribute("Flag","No");
                         out.println("CALL");
Can someone figureout the problem or mistake and help me out.Its urgent and please help me in this regard.Thanks in Advance !

I'm not sure I'm following you. The mapping from URL to servlet can contain anything you want. So you could have the URL /blah/blah/blah that, with a mapping something like /blah/* would pass all requests with that URL pattern to your servlet - no one has to know it is a servlet. Your servlet could then parse the URL to see what it has to do or you could pass parameters as part of the URL or as hidden fields.

Problems with 10049- start menu remains the same, flash crashes, spartan crashes

I updated from 10041, I cannot open start menu at first. After I restarted several times, I can open it but it seems to be the same with old version. I tried Spartan using the search function, and it always crash the time it opens.
Another problem I found is that I cannot use flash in all programs, it always said it crashed.
Additionally, the system becomes really slow compared with older versions.
Thank you for your help

Hi whOWe,
Please submit what you have encountered through Windows Feedback.
Take a try with the command suggested by team zigzag, run the following command first:
DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:\Sources\Install.wim:1 /LimitAccess
Where the X: is the mounted drive using the downloaded Windows 10 build 10041 ISO ifle.
See this thread for reference:
The "new" dism and sfc methods do not work
for me
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Help!! Helix Screen Issue - Refresh/Flicker in Some Cases: Do You Have the Same Issue?!

I'm hoping somebody reads this and does the quick test below to help see if I found a Lenovo Helix display issue, or if just mine is defective!
I just received my Helix Core i7/8GB RAM/256GB SSD/4G LTE. (I have udpated all software, drivers, and Windows. Screen set at normal 32 bit color, 50/60 Hz refresh rates tested - default options unchanged.)
Under some circumstances, I can see some flickering on the screen, like on an old CRTs when you set the refresh rate to very low. I've done some tests, and here is one quick way to reproduce it....can someone else try it so I can see if my Helix is defective?
Keep your helix in normal portrait mode. Open the Windows sticky notes (the built-in app since Windows 7 that lets you put a "postit" on the desktop). Put that note in the upper right corner, so it takes like a quarter of the screen. Leave it on for 2-3 minutes at least (5 minutes best). Then swipe on the right side to bring the charms menu, click settings: now the larger blue vertical bar showing settings/shutdown button etc shows up. Right there, on the blue bar, where the sticky notes used to be underneath, mine flickers a LOT sometimes, and sometimes it's just a little. It goes away after a few minutes. It's exactly and only where the sticknotes were (the rest of my desktop pic is blue).
It's not a software bug. The issue persists on that spot of the screen if you immediately reboot, and progressively diminishes until some time has passed (~2 minutes). The issue also stays in the same physical location if you rotate the display to vertical. It's not a software issue with stiky notes, it's just the color; if I take a screenshot of the color and leave it at the same location on the screen dsktop, then bring blue like the settings bar, it does it. It seems that having yellow on the screen displayed for a few minutes, followed by blue, does it.
So this is visible easily if you have a desktop picture with blue on it (like ocean/beach).
On some occasions too, it just seems that changing completely colors make the overal screen refresh rate seem low; this is very subtle and lasts only for a few seconds. What I'm more worried about is the above test, the flickering is obvious to anyone looking at the screen.
Can somebody try? Again, the yellow of the sticky notes needs to stay on screen for a few minuets, then bring the blue bar of the settings menu on top, and see if you see the "flickering".
Thanks so much in advance!
Nicolas

Anyone? At least someone from Lenovo? I have a limited time to decide if I keep my Helix or not. If I get no reply I'll just have to return it...and I haven't found another alternative tablet that works for me (12" screen, Core i5/i7 and 4GLTE).
BTW, the issue I have isn't hard to see on my tablet. Just use the default windows sticky notes and bring the settings bar on top of it after a few minutes, and you'll see.
My guess is it could be related to the burn in issue posted on this forum. I only see the flickering if the image is left on for a couple of minutes then changed. Only a couple of minutes is needed, not long. BTW I showed it to several poeple, without saying anything, they all saw it immediately.
Not a driver issue. Tried latest drivers, no change. Also, tried an Asus tablet (Vivo Tab) for comparison, I don't see this issue at all, no problem.
Even weirder, it really seems to be specific colors doing that. Leave yellow on the screen and switch to blue. But not any yellow. like the sticky notes have a gradient in color, well only part of the color of the sticky notes make the screen flicker when blue is then displayed on top after that.

Can you have the same smart object in two files?

The situation:
I have a 'base' file A, with two (different) smart objects B and C. Now I want B and C to both contain a third smart object D, and I can't get that to work.
I can place the same file as a smart object in B and C, but it becomes two different smart objects, which are seperately editable. I would like to be able to edit smart object D and the changes to be visible in both B and C and in turn in A.
Is this at all possible?
and please, I'm not looking for workarounds. I have plenty of those, but it would save me a lot of time time if this were possible.
thanks
btw working in photoshop CS5

@PECourtejoie
That's exactly what I need,
but,
some technical issues prevent it from working in Windows Vista or Windows 7
, I'm on win7
@c.pfaffenbichler
That's no problem. just 2 times a ctrl-s. Takes no time at all

Hi guys, Having a problem with emoji. I have the emoji on my dock which I found a shortcut on Cult of the Mac. I click on the emoji and drag it to my email or whatever, and it will not drop into place. There is a blue square. Other shortcuts don't work.

Hi Guys,
Having problem with emoji, I have the character palette shortcut on my dock which I found through article from Cult of the Mac. I click on the emoticon and drag it to my email or whatever and get a blue box - no emoji. I tried the keyboard shortcut - doesn't work. I tried the drop down the menu in edit - doesn't work either. I am running Lion and want to upgrade to Mountain Lion. Want to fix this before I upgrade or should I just upgrade and hope for the best? Been all over the net looking for solution.
Thanks for your help,
blueheron11

Pages does not support the Apple font used for color emoji, so that behavior is normal.
With what app are you reading the yahoo mail? There is really no guarantee than any other email service will show the special Apple font involved.
You should have no problem putting emoji directly into Mail or Text edit via drag drop from the Character Viewer as shown below.
You should also be able to upload graphics here easily by clicking on the camera icon. My email is tom at bluesky dot org.

Problems with multiple itunes accounts on the same computer

Does anyone have issues with this? My husband and I have seperate iTunes accounts, and eventhough I am logged in under my username, his music is loading and mine is gone...
Also, his iPad apps are syncing to my iTunes account - this happened just last night when I plugged my iPod in and was rearranging my playlists and his apps were syncing at the same time.

Well, I usually think of an 'iTunes account' as being an account at the iTunes Store... I take it you have different iTunes collections with separate library files for each of you.
It sounds like you have different user accounts on the computer. Figuring out what is going on will require us knowing a lot more about how you have your iTunes libraries set up. Do you also have a shared area or do you keep totally separate accounts? Are you positive you were't really in his account when this was happening?

Can you have the same song on 2 different albums ?

I would like to use the same track on 2 different albums.
For example, one track on the original album and the same track on my own compilation album.
One way would be to make two copies of the track and call them different names.
e.g. UseSomebody1.mp3 and UseSomebody2.mp3, then these two tracks can be added to the library.
But this seems a waste of space.
I have an existing compilation album with odds and sods of my own tracks. But I want to pick and choose a few tracks from other albums and add to my existing compilation album.
I know about playlists but this isnt the ideal solution either, because I have an existing compilation album already and I want the album to be in the main library (i.e. not have to go thru the playlist menu on the iPod).
I just wondered if there was a way of having 2 seperate tracks in iTunes that point to the same file.

sky_rat wrote:
I made a copy of an mp3 file on an existing album and tried to add it as a new file, but it doesnt appear....
I made a copy of this mp3 file on my desktop and called it "Kids_MGMT.mp3"
I added the file to library but the second copy does not appear, even after a refresh and a search.
Find the original library entry and change something in the metadata, e.g. add an Album Artist even if you don't need it. Then go back to the renamed copy and move it into your iTunes folder at an appropriate location, right-click the file, and choose Open With > iTunes. It will immediately show as a separate library entry.

Problem with IPhone4, maybe you have the same!! (related to Micro SIM Slot)

Similar Messages

Maybe you are looking for