Problem with jms tutorial

I try to run Chapter 7 simple example with j2ee in sun's jms tutorial.
I followed instruction in tutorial to compile,create queue, create MDBApp.ear, run j2ee server and depoly message-driven ejb. But there is a strange thing
On the client terminal
Initiating login ...
Binding name:'java:comp/env/jms/QueueName"
Binding name: 'java:comp/env/jms/MyQueueConnectionFactory"
Java(TM) Message Service 1.0.2 Reference Implementation (build b14)
Sending message: This is message 1
then client stop
But on the j2ee server side, nothing happened.
still display
Deploying message driven bean MessageBean, consuming from jms/MyQueue
Application SampleMDBApp deployed.
I even tried run
runclient -client SampleMDBApp.ear -name SimpleClient
but the result is same.

I'm having a similar problem when I tried to publish some message to
my client. EJB seems to send the message but client never receives it.
Anyone care to shed some light?

Similar Messages

Problem with JMS migration when using Ctrl+C to stop the managed server in cluster

          Hi,
          I am having a clustered weblogic application running on Weblogic 7.0 SP5. My application
          uses JMS as a asynchrous communication. We have MDB which listens to these JMS
          messages.
          If something is being processed on Managed Server 1 and while the request is in
          process, i am stopping the the MAnaged SErver 1 using Ctrl+C.
          After this, i go to admin console and migrate teh JTA and JMS. After this, i am
          expecting other running Managed Server should restart the incomplete transaction.
          But this is not happening. The Managed Serve2 doesn't process the requst.
          But when i restart teh MAnaged SErver 1 again, it takes up the same request and
          processes it.
          Is this a known problem with Weblogic that it doesn't support Ctlr+C case?
          Please note that the same thing is working fine when i stop the server using Admin
          console(Normal shutdown OR forced shutdown).
          Any comments in this regards are apprecciated.
          Thanks,
          Naresh


          Hi,
          I am having a clustered weblogic application running on Weblogic 7.0 SP5. My application
          uses JMS as a asynchrous communication. We have MDB which listens to these JMS
          messages.
          If something is being processed on Managed Server 1 and while the request is in
          process, i am stopping the the MAnaged SErver 1 using Ctrl+C.
          After this, i go to admin console and migrate teh JTA and JMS. After this, i am
          expecting other running Managed Server should restart the incomplete transaction.
          But this is not happening. The Managed Serve2 doesn't process the requst.
          But when i restart teh MAnaged SErver 1 again, it takes up the same request and
          processes it.
          Is this a known problem with Weblogic that it doesn't support Ctlr+C case?
          Please note that the same thing is working fine when i stop the server using Admin
          console(Normal shutdown OR forced shutdown).
          Any comments in this regards are apprecciated.
          Thanks,
          Naresh

Problem with JMS in a Cluster

In summary I am having a problem with my application when it is running on the server that does not contain the JMS.
          Setup:
          2 machines:- Server 1 with the Admin Server and a Managed Server with JMS and a Distributed Queue. Second machine (Server 2) with a managed server. The two managed servers are in a Cluster.
          The connection factory has xa enabled.
          The queue is a distributed queue, with one member queue - on server 1.
          Scenario 1 (works):
          Deploy my application on Server 1 only
          Scenario 2 (works):
          Deploy my application on Server 1 and Server 2
          When the application puts messages on the JMS queue, the messages are processed round robin by the MDB on both Server 1 and Server 2 - as expected.
          Scenario 3 - Does not work
          Deploy my application on Server 2 only
          The application successfully sends a message to the queue - I can see it in queue through the console.
          However the MDB never processes the message. On the queue, I can see 0 consumers.
          Essentially the MDB appears to deploy correctly from the server log but never appears as a consumer on the queue.
          I know the above information is very brief, however I can provide more configuration details and detailed logging if required.

On a further look through the logs, I have found the following Warning message which may point to the reason why my MDB is not receiving messages from JMS:
          <25-Apr-2005 17:26:01 o'clock IST> <Warning> <EJB> <BEA-010220> <The jms destination 'AsyncMessageQueue' is a distributed destination and it has no physical destination(s) on the current weblogic server. As per distributed destination co-location rules, no pool was creted for the MDB 'AsyncMessage(Application: m3-j2ee_Weblogic21apr_2, EJBComponent: ejb_framework.jar)' on this weblogic server. Hence the MDB 'AsyncMessage(Application: m3-j2ee_Weblogic21apr_2, EJBComponent: ejb_framework.jar)' cannot receive any messages on this server.>
          I have created a Destination on the JMS Server ("Replicate JNDI Name In Cluster" is set), and I have created a Distributed Destination, which has as its member the Destination associated with the JMS Server.
          If the JMS is not on the same server as the deployed application, how do I get the MDB to connect to the physical destination?
          Do I always need a Physical Destination on the the same server as my deployed application? If so, how do I create a Physical Destination on the server that does not have the JMS?
          Any help appreciated.

Problem with Photoshop tutorial

I'm trying to follow this tutorial here,
http://www.layersmagazine.com/photoshop-cs4-a-picture-worth-a-thousand-words.html
Which is turning a portrait into a portrait of words, and i'm having a problem with step 9.
"9 PASTE INTO A LAYER MASK
Show all layers and activate the layer with the painted words. Click on the Add Layer Mask icon at the bottom of the Layers panel to add a layer mask. Hold down Option (PC: Alt) and click on the layer mask thumbnail (this will hide the painted text and show just the mask). Press Command-V (PC: Ctrl-V) to paste the copied pixels onto the mask. Press Command-D (PC: Ctrl-D) to Deselect. Press Command-I (PC: Ctrl-I) to Invert the mask (your mask should look like a negative of the black-and-gray pixel image that you pasted)."
When I paste, the image comes up in a new layer, and not on the mask. I've gone over it multiple times, and went back to previous steps to make sure I did everything right, so i'm not sure what the problem is. Can anyone help?
Thanks,
Brian

Did you Alt click on the mask thumbnail
(the image turns white) and then paste?
MTSTUNER

Problem with JMS Dispatcher in 10.1.3

When we try to set up the JMS Dispatcher in Oracle SES 10.1.3, we always get an error while starting the SES:
Missing class: oracle.edge.impl.dispatcher.JMSEventDispatcher
Any ideas how to make JMS Dispatcher working under 10.1.3? It is quite urgent...
Thank you!!!
DM

Hi DM,
We had some problems with the new JMS framework.
We are working on it.
I'll post any news once we have them.
Regards,
Ron

Problem with Composition Tutorial

Hi at first,
I am new to this forum as well as new to the SAP composition application topics
Since I want to learn how to build composite applications with the Netweaver Developer Studio/ Process Composer I started with the tutorial "Getting Started with Composite Designer" included in the Studio.
If I follow the instructions up to modeling of data objects the final step of generating the tables of the emplserv.bl.caf package fails with the error message:
com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Problem with WSDL file parsing. See nested message.
Problem with WSDL file parsing. See nested message.
IO Exception occurred while parsing file:unknown protocol: c
unknown protocol: c
Can anyone help me with this problem?
Thanks in advance

Hi Felixw,
You are probably using JDK 1.6 instead of JDK 1.5.
Please adjust the startup -vm parameter to be the javaw.exe of JDK 1.5 and you are just fine!
For instance:
C:\IDE\eclipse\SapNetweaverDeveloperStudio.exe -vm "c:\jdk1.5.0_18\bin\javaw.exe"
Kind regards,
Ivan

Problems with JGSS tutorial - AccessControlException

Hi all,
unfortunately I've got a big problem with the ClientServer JGSS tutorial.
After doing everything like the HTML file said, I firt started the server and then the client.
The client then produces this exception:
Kerberos username [stnt1]: myName
Kerberos password for benni: myPass
java.security.AccessControlException caught
access denied (javax.security.auth.kerberos.ServicePermission SampleServer/[email protected] initiate)
java.security.AccessControlException: access denied (javax.security.auth.kerberos.ServicePermission SampleServer/[email protected] initiate)
     at java.security.AccessControlContext.checkPermission(AccessControlContext.java:269)
     at java.security.AccessController.checkPermission(AccessController.java:401)
     at java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
     at sun.security.jgss.krb5.Krb5Context.checkPermission(Krb5Context.java:1089)
     at sun.security.jgss.krb5.Krb5Context.initSecContext(Krb5Context.java:527)
     at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:213)
     at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:158)
     at SampleClient.main(SampleClient.java:150)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at MyAction.run(Login.java:241)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     at Login.main(Login.java:200)
... and I really don't have any clue about why exactly I'm getting this error.
Thanx a lot for hints and help ...
Benjamin

Hi again,
got it ... I hat my computer name written wrong in the start script.
Bye,
Benjamin

Is there a problem with JMS and Weblogic?

          Hi,
          I am using JMS and Weblogic (Not Message Driven bean).
          My problem is that after some time my listeners disappears.
          I am sending them a message and instead of 6 listeners
          I get only 4 messages.
          So, My question is: Is there any problem working with JMS
          and Weblogic???
          Thanks,
          Tal.


Too little information and a very vague question. Need more info.
          "Tal" <[email protected]> wrote in message
          news:[email protected]..
          >
          > Hi,
          > I am using JMS and Weblogic (Not Message Driven bean).
          > My problem is that after some time my listeners disappears.
          > I am sending them a message and instead of 6 listeners
          > I get only 4 messages.
          > So, My question is: Is there any problem working with JMS
          > and Weblogic???
          > Thanks,
          > Tal.

Problem with OrderBooking tutorial

A little problem...when i do obant in PriceQuote I have no problem with RapidDistributors but with SelectManifacturing I have:
all:
[bpelc]Convalida BPEL non riuscita
lettura file wsdl non riuscita...
in TaskManager?wsdl perchÃ¨ ...PARSER ERROR...
Accertarsi che il file esiste nella posizione specifica...
soluzione:Se il sito dispone di un server proxy puÃ² essere necesssario configurare BPEL server, designer e browser con le impostazioni del server proxy.
I have not proxy server!But in Preferences I have put (as the guide says) localhost|127.0.0.1 in exception.
Thanks,
Ema

BPEL Process Manager 10.1.2 GA
Bpel designer
Oracle IDE     10.1.2.17.84
Business Components Version     10.1.2.17.96
UML Modelers Version     10.1.2.16.71
Versioning Support     10.1.2.16.71
WebDAV Support Version     10.1.2.16.71
Struts Modeler Version     10.1.2.6.15
BPEL Designer     10.1.2.0.0 (Build 050504)
Designer Generators Framework     10.1.2.7.56
ADF UIX     2.2.16
java.version     1.4.2_06
java.home     C:\Programmi\OracleBPELPM1\jdk\jre
java.vm.name     Java HotSpot(TM) Client VM
java.vm.vendor     Sun Microsystems Inc.
java.vm.version     1.4.2_06-b03
user.language     it
user.region     <no value assigned>
user.name     emanuele
user.home     C:\Documents and Settings\emanuele
user.dir     C:\Programmi\OracleBPELPM1\integration\jdev\jdev\bin
os.name     Windows XP
os.version     5.1
os.arch     x86
Ema

Problems with JMS: Error JMS BEA-040368

Hi,
I have run into a problem using JMS on BEA. It appears to happen when we run huge amounts of messages through the queue (100 000+).
Once this error occurs, we cant get rid of it. Restarting server, re-dployment, nothing works. Every subsequent message sent to the JMS produces this error.
According to the error message, we have exceeded the maximum allowed transactions for the server, but how do we reset the transactions? And what is causing the error to appear in the first place? Somthing I forget to close or flush?
I have QueueConnection, QueueSession and QueueRecevier objects open for all transactions, and close them when the bean is destroyed. Should I rather create and close them for each transaction?
Here is the exception:
<15.jun.2005 kl 14.55 CEST> <Error> <JMS> <BEA-040368> <The following exception has occurred:
java.lang.RuntimeException: [EJB:010166]Error occurred while starting transaction: javax.transaction.SystemException: Exceeded maximum allowed transactions on server 'myserver'.
at weblogic.ejb20.internal.MDListener.perhapsBeginTransaction()V(MDListener.java:325)
at weblogic.ejb20.internal.MDListener.execute(Lweblogic.kernel.ExecuteThread; )V(MDListener.java:339)
at weblogic.ejb20.internal.MDListener.onMessage(Ljavax.jms.Message; )V(MDListener.java:262)
at weblogic.jms.client.JMSSession.onMessage(Ljavax.jms.MessageListener;Lweblogic.jms.common.MessageImpl; )V(JMSSession.java:2678)
at weblogic.jms.client.JMSSession.execute(Lweblogic.kernel.ExecuteThread; )V(JMSSession.java:2598)
at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest; )V(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:178)
at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread; )V(Unknown Source)
>

Developments
It turned out that my "client" used: this.queueSession = queueConnection.createQueueSession(false, Session.AUTO_ACKNOWLEDGE);
While the "server" used: this.queueSession = queueConnection.createQueueSession(true, Session.AUTO_ACKNOWLEDGE);
Now changing both sessions to use transactions (createQueueSession(true, Session.AUTO_ACKNOWLEDGE)) and fortifying the use of QueueSession.commit() when sending and receiving messages seemed to solve the problem... for a while.
After a few new tests the problem appeared again, this time on the "client" side. It is obvious that transaction are somehow not commited correctly even though Session.commit() is called after each and every message is sent and received.
Btw. To make the app "clean up" hanging transactions faster you can change the value in the console at:
Mydomain --> Services --> JTA --> Abandon Timeout Seconds
weblogic.jms.common.TransactionRolledBackException: Exceeded maximum allowed transactions on server 'myserver':error beginning transacted session's internal transaction
at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:137)
at weblogic.jms.dispatcher.DispatcherImpl_814_WLStub.dispatchSyncNoTranFuture(Unknown Source)
at weblogic.jms.dispatcher.DispatcherWrapperState.dispatchSyncNoTran(DispatcherWrapperState.java:472)
at weblogic.jms.client.JMSProducer.sendInternal(JMSProducer.java:391)
at weblogic.jms.client.JMSProducer.send(JMSProducer.java:186)
at no.nrk.returia.test.TestSMSInAdapter.send(TestSMSInAdapter.java:133)
at no.nrk.returia.test.TestSMSInAdapter.main(TestSMSInAdapter.java:206)

Problem with JMS from session bean

My guess is that in your effort to work around the
clustering/ejb/jndi problems, you have a producer
sending on one topic, and a consumer listening on
another topic. You can check to see if they are the
same destination using the (uncompiled) code snippets
below at both the producer and consumer ends.
import weblogic.jms.common.DestinationImpl;
Topic topic;
DestinationImpl destination = (DestinationImpl) topic;
System.out.println("name = " + destination.getServerName() + "/" +
destination.getName());
System.out.println("back-end id = " + destination.getBackEndId());
System.out.println("destination id = " + destination.getDestinationId());
_sjz.
"Malcolm Robbins" <[email protected]> wrote in message
news:[email protected]...
>
This was also posted to the EJB newsgroup and was asked to post the secondissue
here. Please focus on the second issue, but the first providesbackground.
>
>
I have discovered two significant problems in WLS6.0 with JNDi and JMSthat do
not occur in the Sun Reference implementation (1.3 Beta).
Attached is some code you can try to see the problem.
I have developed a JmsClient that simply looks up a session bean andpasses it
a string to publish. The session bean is meant to publish to a JMS topic.
However I have discovered two problems:
1) In teh ejbCreate() method I look up the topic connection factory andtopic
in JNDI. These are referenced as "java:comp/env/jms/JmsConnectionFactory"and
"java:comp/env/jms/JmsTopic" respectively. Here's a fragment of theejb-jar
descriptor
<resource-ref>
<description>The (probably durable) Topic Connection Factory to connectto</description>
<res-ref-name>jms/JmsConnectionFactory</res-ref-name>
<res-type>javax.jms.TopicConnectionFactory</res-type>
<res-auth>Container</res-auth>
</resource-ref>
<resource-env-ref>
<description>The Jms Source Topic to publish to</description>
<resource-env-ref-name>jms/JmsTopic</resource-env-ref-name>
<resource-env-ref-type>javax.jms.Topic</resource-env-ref-type>
</resource-env-ref>
As you can see they are resource references and resoruce environmentreferences
respectively. The weblogic-ejb-jar maps these to the real JNDI names"TopicConnectionFactory"
amd "SchemaTopic" respectively as shown below by the fragment:
<weblogic-ejb-jar>
...etc...
<reference-descriptor>
<resource-description>
<res-ref-name>jms/JmsConnectionFactory</res-ref-name>
<jndi-name>TopicConnectionFactory</jndi-name>
</resource-description>
<resource-env-description>
<res-env-ref-name>jms/JmsTopic</res-env-ref-name>
<jndi-name>SchemaTopic</jndi-name>
</resource-env-description>
</reference-descriptor>
Now here's the first problem. When this is deployed the resourceenvironment
"logical" name (JNDI linkref) for the topic is not defined. The code willhappily
find the connection factory (presuming you've set these administeredobjects at
the console).
2) The second problem now arises. In the code I have ahcked it so thatwhen
the JNDI lookup fails it tries looking up the real topic in JNDI(SchemaTopic)
directly.
This works and teh bean now appears to work, albeit with a directlyhardcoded
JNDI reference in it. However, if you hook up a standard JMS consumer tothat
topic it will not consuem the message that is published!!! While thestats clock
up at the console the message appears to go into a black hole. I canprovdie
a stadnard consumer if you need one.
I have the code working fine as-is in teh Sun Reference implementation soI presume
these are bugs with WL6.0.
Can anyone advise workarounds and/or fix the problem?

Problem with JMS stores in 8.1 sp2

          Hi
          Everytime I use the wizard to create a JMS server/Queue and a store I get this
          kind of error. Am not able to figure out why this happens - why is the store assigned
          to this
          <WSReliableDeliveryPolicy Name="RMDefaultPolicy" Store="clsstore"
          DefaultRetryCount="10" DefaultTimeToLive="60000"/>
          guy? I never configured it! I am attaching the config.xml with this mail. Can
          anyone tell me what I doing wrong?
          error trace---------------------------
          <Mar 10, 2004 12:37:18 PM EST> <Notice> <Management> <BEA-140005> <Loading domai
          n configuration from configuration repository at C:\bea8\user_projects\domains\m
          yclsdomain\.\config.xml.>
          The WebLogic Server did not start up properly.
          Exception raised: 'weblogic.management.configuration.ConfigurationException: Set
          ting attribute Targets with values
          myclsdomain:Name=merlin_1,Type=Server
          for mbean myclsdomain:Name=clsjmsserver,Type=JMSServer - with nested exception:
          [javax.management.InvalidAttributeValueException: One of the stores configured
          f
          or JMS Server "clsjmsserver" is already configured for use by a reliable deliver
          y policy on a different server (A JMS store may only be used once).]'
          Reason: weblogic.management.configuration.ConfigurationException: Setting attrib
          ute Targets with values
          myclsdomain:Name=merlin_1,Type=Server
          for mbean myclsdomain:Name=clsjmsserver,Type=JMSServer - with nested exception:
          [javax.management.InvalidAttributeValueException: One of the stores configured
          f
          or JMS Server "clsjmsserver" is already configured for use by a reliable deliver
          y policy on a different server (A JMS store may only be used once).]
          thanks
          Anamitra
          [config.xml]


          Hi Dongbo
          I didnt configure any WS reliable messaging - it got the entry by default and
          am not sure whether this is a bug of the configure app or anything related to
          JMS config. But this happens consistently - I have tried on several different
          installation of WLS 8.1 sp2 and happens everywhere. What do I have to do to not
          have it?
          Also in ur reply I didnt quite get what u meant by this----------------
          This would be fine if the JMSServer and
          >the Web Services
          >policy is on the same server. The problem is that they are on two different
          >WebLogic
          >Servers.
          do let me know if this is a bug as all I am doing is setting up a Queue using
          the config wizard.
          thanks
          Anamitra
          Dongbo Xiao <[email protected]> wrote:
          >Hi Anamitra,
          >
          >I don't know how you instructed the wizard, however, it looks like that
          >the wizard
          >somehow configured the same JMS file to be used for both a JMSServer
          >and a policy for Web
          >Service's Reliable Messaging. This would be fine if the JMSServer and
          >the Web Services
          >policy is on the same server. The problem is that they are on two different
          >WebLogic
          >Servers.
          >Thanks,
          >Dongbo
          >
          >Anamitra wrote:
          >
          >> Hi
          >> Everytime I use the wizard to create a JMS server/Queue and a store
          >I get this
          >> kind of error. Am not able to figure out why this happens - why is
          >the store assigned
          >> to this
          >>
          >> <WSReliableDeliveryPolicy Name="RMDefaultPolicy" Store="clsstore"
          >> DefaultRetryCount="10" DefaultTimeToLive="60000"/>
          >>
          >> guy? I never configured it! I am attaching the config.xml with this
          >mail. Can
          >> anyone tell me what I doing wrong?
          >>
          >> error trace---------------------------
          >>
          >> <Mar 10, 2004 12:37:18 PM EST> <Notice> <Management> <BEA-140005> <Loading
          >domai
          >> n configuration from configuration repository at C:\bea8\user_projects\domains\m
          >> yclsdomain\.\config.xml.>
          >> ***************************************************************************
          >> The WebLogic Server did not start up properly.
          >> Exception raised: 'weblogic.management.configuration.ConfigurationException:
          >Set
          >> ting attribute Targets with values
          >> myclsdomain:Name=merlin_1,Type=Server
          >> for mbean myclsdomain:Name=clsjmsserver,Type=JMSServer - with nested
          >exception:
          >>
          >> [javax.management.InvalidAttributeValueException: One of the stores
          >configured
          >> f
          >> or JMS Server "clsjmsserver" is already configured for use by a reliable
          >deliver
          >> y policy on a different server (A JMS store may only be used once).]'
          >> Reason: weblogic.management.configuration.ConfigurationException: Setting
          >attrib
          >> ute Targets with values
          >> myclsdomain:Name=merlin_1,Type=Server
          >> for mbean myclsdomain:Name=clsjmsserver,Type=JMSServer - with nested
          >exception:
          >>
          >> [javax.management.InvalidAttributeValueException: One of the stores
          >configured
          >> f
          >> or JMS Server "clsjmsserver" is already configured for use by a reliable
          >deliver
          >> y policy on a different server (A JMS store may only be used once).]
          >> ***************************************************************************
          >>
          >> ----------------------------------------------------------------------
          >>
          >> thanks
          >> Anamitra
          >>
          >> ------------------------------------------------------------------------
          >> Name: config.xml
          >> config.xml Type: XML Document (text/xml)
          >> Encoding: base64
          >

New to JDeveloper, having problems with EJB tutorial.

Hi,
I'm new to the world of JDeveloper, I'm trying to follow this tutorial
http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/ejb/ejb.html
Firstly when I create an entity from a table I get the following error;
Starting Offline Database Synchronization
Generating classes for Entity CbsdSecurity...
Entity generation for CbsdSecurity failed.
I'm not really sure why this is, however I suspect this is at the heart of the problems.
If I continue I can get to the point where I create a EJB Diagram, however when I try to drag my autogenerated class onto the diagram I get the following error;
"Entity does not belong to Persistence Unit xxxxEJB which is associcated with Diagram EJB3.ejb_diagram"
In addition the log at the bottom has the following warnings.
23-Sep-2010 10:07:46 oracle.security.jps.internal.credstore.ssp.CsfWalletManager openWallet
WARNING: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
23-Sep-2010 10:07:53 oracle.adf.share.jndi.ReferenceStoreHelper getReferencesMapEx
WARNING: Incomplete connection reference object for connection:fcs2ukd
Now my database connection doesn't seem to remember the password even though I have ticked the 'remember password' tick box.
I am developing under Windows XP using JDK1.6.0.21
If anyone could point out what I'm going wrong I would be very grateful.
Thanks
Rich
Edited by: Rich Carless on Sep 23, 2010 9:32 AM

Try to test Your DB connection in JDeveloper. Is it success?
Best regards, Debuger!

Problem with HelloWorld tutorial

As I created HelloWorld process based on tutorial http://st-curriculum.oracle.com/obe/fmw/obpm/11g/r1/firstProcess/firstprocess_obpm11g.htm
Deployment fails with exception. Anybody can help with this?
java.lang.RuntimeException: oracle.bpm.metadata.exception.MetadataException: BPM
-70812: Process 'HelloWorldProcess' not found. Cause: The specified process was
not found. Action: Check that the name of the process is correct
at oracle.bpm.bpmn.engine.model.ModelCreator_FromMetadata.createModel(Mo
delCreator_FromMetadata.java:66)
at oracle.bpm.bpmn.engine.model.deploy.schema.BpmnDesignSchema.init(Bpmn
DesignSchema.java:203)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.deploy(BPMNServiceEn
gine.java:406)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.deploy(BPMNServiceEn
gine.java:104)

Im facing the same problem, the same stack trace but I'm trying to deploy two BPMN processes into my composition. Any idea??
<Nov 1, 2010 5:40:45 PM CST> <Error> <oracle.integration.platform.blocks.deploy.servlet> <SOA-21037> <Sending back error message: Error during deployment: Deployment Failed: Error occurred during deployment of component: Resguardo to service engine: implementation.bpmn, for composite: PSDProcesses: java.lang.NullPointerException..>
java.lang.RuntimeException: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'Process2' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct

Problem with official tutorial

Hello fellows,
I’ve got an doubt about tutorial that is on the net. I
have installed trial version and wanted to start with Flex, and I
took tour on tutorial that is on
http://www.adobe.com/devnet/flex/articles/first_flexapp_07.html
but I’ve meet next problems:
1.
<mx:Array id="identifier">
<mx:Object>
<label>literal string</label>
<data>another literal string</data>
</mx:Object>
</mx:Array>
This yield syntax error and only works if I write
<mx:Object label=”…”
data=”…” />
2.
After I added list, button, event and …
<mx:List id="cart"/>
<mx:Script>
<![CDATA[
function addToCart():Void {
cart.addItem(coffeeCombo.selectedItem.label,coffeeCombo.selecte
dItem.data);
]]>
</mx:Script>
But there is a message that function addItem doesn’t
exist on the list object. I was looking on the documentation and
there is only addChild method that receive object of type
DisplayObject.
Ok, probably you can notice by now that I am really newbie to
Flex but I would be very thankful if someone can point me what is
wrong and where to look for better and more accurately tutorial.
Thanks in advance for your effort and time.
Alex

I should say that it is a tutorial about Flex 1.5. Flex 2 has
changed much. So you could not compile codes of 1.5 using Flex
Builder 2.0 . I do not know what has changed to Object class so
that you can not complie it. But i do know the second question. In
Flex 2.0, you can no longer use the following line:
List.addItem();
Instead, using the following line:
List.dataProvider.addItem();

Problem with jms tutorial

Similar Messages

Maybe you are looking for