Problem with length of Textfield when converted to Bitmap
im using this code from the docs
import flash.display.Bitmap;
import flash.display.BitmapData;
import flash.text.TextField;
var tf:TextField = new TextField();
tf.text = "bitmap text";
var myBitmapData:BitmapData = new BitmapData(80, 20);
myBitmapData.draw(tf);
var bmp:Bitmap = new Bitmap(myBitmapData);
this.addChild(bmp);
the problem is when i make the string longer - there are
characters missing in the Bitmap - ive used the TestFormat to no
avail
any one any ideas
tks
M
Did you make the myBitmapData bigger on subsequent occasions?
BitmapData(80, 20); means 80 pixels wide by 20 high : if your
textfield gets bigger than that then it won't fit onto the
bitmapdata
Similar Messages
-
Having problems with adobe color engine when converting a 32bit file into an 8bit in Photoshop CC.
I'm having problems with the "adobe color engine" when converting a 32bit file into an 8bit.
Error Message reads: "could not convert the image to 8 bit/channel because of a problem using the adobe color engine.
Never had this problem before, just recently started happening! I've tried multiply files since and some work, some don't, can't work out why!? thought it might be due to a large file size?...any suggestions?That would require much more info about your files, your system and the version of PS you are using. Presumably there is some color profile issue at play here.
Mylenium -
Spool to PDF - Problems with downloading PDF file when converting with job
Hi all!
I've got a problem. I've got a program that writes a smartform into the spool. After that, I am using the function modules RSTS_GET_ATTRIBUTES and CONVERT_OTFSPOOLJOB_2_PDF to convert it into PDF. I retrieve a internal table with the binary content for the PDF file. Now i can download the file to the desktop by using the method cl_gui_frontend_services=>gui_download.
But there is a problem: when the spool excesses 99 pages, the function module CONVERT_OTFSPOOLJOB_2_PDF asks the user via popup if the PDF should be created in background. If the user commits, the internal tables that should contain the binary PDF data is emtpy. A background job writes the binary data into the spool. The user has got an empty file that will be generated by cl_gui_frontend_services=>gui_download.
So, is it possible to suppress the popup to create the PDF allways online? Or how can I write the PDF file if there will be create any spool id in background? You'll find my current code below.
* Prüfen ob es die übergebene Spoolnummer überhaupt gibt
SELECT SINGLE * FROM tsp01 INTO ls_tsp01 WHERE rqident = id_spoolid.
IF ( sy-subrc <> 0 ).
cf_error = 'X'.
EXIT.
ENDIF.
* TemSe-Objekte speichern sequentielle Daten. Ein TemSe-Objekt kann aus
* mehreren Teilen bestehen. Dieser FB ermittelt die wichtigsten Attribute
* eines TemSe-Objekts. Falls das Objekt aus mehreren Teilen besteht, werden
* die Attribute entsprechend zusammengefaßt.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
client = ls_tsp01-rqclient
name = ls_tsp01-rqo1name
part = 1
IMPORTING
objtype = ld_objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF ( sy-subrc <> 0 ).
cf_error = 'X'.
EXIT.
ENDIF.
IF ld_objtype(3) = 'OTF'.
lf_is_otf = 'X'.
ELSE.
lf_is_otf = ' '.
ENDIF.
IF ( lf_is_otf = 'X' ).
* Konvertiere OTF-Spoolauftrag nach PDF
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = id_spoolid
no_dialog = ' '
* pdf_destination = 'T'
IMPORTING
pdf_bytecount = ld_numbytes
pdf_spoolid = ld_pdfspoolid
btc_jobname = ld_jobname
btc_jobcount = ld_jobcount
TABLES
pdf = lt_pdf
EXCEPTIONS
err_no_otf_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_dstdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
IF ( sy-subrc <> 0 ).
cf_error = 'X'.
EXIT.
ENDIF.
ELSE.
* Konvertiere ABAP-Liste-Spoolauftrag nach PDF
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = id_spoolid
no_dialog = ' '
IMPORTING
pdf_bytecount = ld_numbytes
pdf_spoolid = ld_pdfspoolid
btc_jobname = ld_jobname
btc_jobcount = ld_jobcount
TABLES
pdf = lt_pdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
IF ( sy-subrc <> 0 ).
cf_error = 'X'.
EXIT.
ENDIF.
ENDIF.
WHILE ( lf_file_ok = '' ).
* Die in der Tabelle lt_pdf enthaltenen Binärdaten werden nun in eine
* Datei geschrieben. Da alle übergebenen Tickets in die gleiche Datei
* geschrieben werden, kann der im Speicher gehaltente Protokolleintrag
* gelesen werden
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = ld_numbytes
filename = cd_filename
filetype = 'BIN'
* append = SPACE
* write_field_separator = SPACE
* header = '00'
* trunc_trailing_blanks = SPACE
* write_lf = 'X'
* col_select = SPACE
* col_select_mask = SPACE
* dat_mode = SPACE
confirm_overwrite = 'X'
* no_auth_check = SPACE
* codepage = SPACE
* ignore_cerr = ABAP_TRUE
* replacement = '#'
* write_bom = SPACE
* trunc_trailing_blanks_eol = 'X'
* wk1_n_format = SPACE
* wk1_n_size = SPACE
* wk1_t_format = SPACE
* wk1_t_size = SPACE
* IMPORTING
* filelength =
CHANGING
data_tab = lt_pdf
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
not_supported_by_gui = 22
error_no_gui = 23
OTHERS = 24.Creating a PDF file with over 99 pages through SAP seems rather unreasonable to me. What are you printing - Encyclopedia Britannica? For cripes sake... Have you thought about creating more than one spool request or using something completely different? Why do you have to do this through spool? You can get Smartform output directly into PDF, there are a lot of example out there.
The only solution that comes to mind is rather brutal - create a copy of the function module and get rid of the popup. Although it just might time out after that... -
Problems with Custom Data Types when converting from TS 1.0 to 3.0.
I am currently involved in the process of converting a test environment from TestStand 1.0, LabVIEW 5.1, and Windows NT to TestStand 3.0, LabVIEW 7.0, and Windows XP. We use a custom Operator Interface developed in LV. Based on the entered Model and Serial number, the appropriate Test Sequence is called. We also use a custom Process Model. The steps in the Test Sequence are either LV code modules or DLLs created in C++. We have LV SubVIs and C++ API functions that allow the developers of the test steps to add data to various Custom Data Types. For example, a developer may set up a test to add a note (Step.Result.Notes[x].String) when the test fails. Step.Result.Notes is a container for an array of strings. The attempt to set a note first attempts to use SetDimensions to redimension the array, then SetValString to set the value. These notes are added to the report. On the old system, everything worked fine. A note could be added to any result. On the new system, if a note is added to say the 5th result, but results 1-4 do not have a note, the test sequence ends and the Operator Interface returns to waiting for data entry (as if no test ever happened). No report is generated. The LabVIEW libraries have been modified to solve this problem by calling SetDimensions to incrementally increase the array size by one, and populating the unused TestStand array elements with an empty array of LabVIEW strings using the SetValString call . In other words, based on the previous example, if the user wants to set a note for the 5th result, the notes for results 1-4 must first be sent an empty array of strings. The report will only display the note for Result 5 (as desired). In addition to this being cumbersome, attempting to implement the same workaround in the C++ API has been unsuccessful because even though the note arrays for unwanted notes (1-4) is initialized with nothing, it is still displayed as a note (empty) on the report. If anybody knows what is wrong and what the solution is, it will be appreciated.
Aaron,
Thanks for your reply. I will attempt to clarify. I am working with a single step. The step calls a DLL. The DLL performs many 'checks' on the UUT (e.g. Model Number Check, Serial Number Check, Calibration Constants Check, etc.). Under the Type Palette - MyTypes.ini, we have a Step Type called TEST_DLL with a container in it called Results. In the Results container are a number of things, but I will only list the important ones:
Notes (Array of Type 'Notes'; Type 'Notes' is a Custom Data Type (container, Type Definition)containing an array of strings called 'String')
-Notes are generally set when on of the checks fails, otherwise no Note is set for the check.
Val (Array of Type 'Val'; Type 'Val' is Custom Data Type (container, Type Definition) containing a Boolean called 'Boolean')
-Val indicates whether the check passed of failed
Pseudocode example:
//Model Number Check
check# = 0;
resultBOOL = ModelNumberCheck();
SetDimensions("Step.Result.Val", 0, "[0]", check#);
SetValBoolean("Step.Result.Val[check#].Boolean", 0, resultBOOL);
if(resultBOOL == FAIL)
Note# = 0;
SetDimensions("Step.Result.Notes", 0, "[0]", check#);
SetDimensions(Step.Result.Notes[check#].String, 0, "[0]", Note#);
SetValString("Step.Result.Notes[check#].String[Note#]", 0, "Model Number Check failed");
Note# = 1;
SetDimensions(Step.Result.Notes[check#].String, 0, "[0]", Note#);
SetValString("Step.Result.Notes[check#].String[Note#]", 0, "Model Number = 1234");
//Serial Number Check
check# = 1;
resultBOOL = SerialNumberCheck();
SetDimensions("Step.Result.Val", 0, "[0]", check#);
SetValBoolean("Step.Result.Val[check#].Boolean", 0, resultBOOL);
if(resultBOOL == FAIL)
Note# = 0;
SetDimensions("Step.Result.Notes", 0, "[0]", check#);
SetDimensions(Step.Result.Notes[check#].String, 0, "[0]", Note#);
SetValString("Step.Result.Notes[check#].String[Note#]", 0, "Serial Number does not match expected");
More Checks
As you can see above, the "Step.Result.Val" array is redimensioned for every check. The "Step.Result.Notes" array is only redimensioned when a note needs to be added for a failing check. If the entire step executes and no check adds a note, the sequence is fine. If every check fails and therefore every check adds a note, the sequence is fine. However, if there are any gaps (e.g. check 0 adds a note, check 1 does not add a note, and check 2 tries to add a note), the sequence will stop. If I add blank notes for every check that would otherwise not have a note, the sequence completes, but the report shows the blank note.
Also, the exact code that is causing these problems runs fine on our old systems (TestStand 1.0). I hope that I clarified the problem and thanks again for the help. -
I have a problem with elements 8. When ever I start a new project, the program searches for the old, latest used filmmaterial, I have used before. That means, if I use a different DVD, it take so much time, until the program starts. So how can I stopp the automatically uploading of old material?
ThanksYou have 2 unreachable statements in this method.
public static int eval(String s2, String op, String s3) {
return lookup(s2);
return lookup(op);
return lookup(s3);
} You're missing a } at the end of this method:
public static int lookup(String s) {
for(int k = 0; k < symbols.length; k++){
String symbol = symbols[k];
if(s.equals(symbol))
return k;
}You have some loose } and ; at the end of the file:
public static void main(String args[])
commandline();
} -
When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. The change has something to do with Apple "push". I recently had a problem with"push" on iTunes when I tried to sync my iPod Touch. I have latest software for iTunes and iPod. Can anyone tell me what to do to get this change to install?
ptford wrote:
When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware
Since hardware cannot be changed with software, perhaps you would be so kind as to post the exact wording of the message? -
i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything
Will u help me or not?
-
I have Windows 7 and just recently experienced a problem with itunes freezing up when I clicked on the "apps" tab which shows the apps that are loaded on my phone. Everything else in the itunes software seems to be working okay. The problem is in the part where you sync the newly purchased apps. The apps will all be blank that are downloaded and that part of the software crashes itunes or freezes up. I can get out of itunes okay after the freeze up, but it just stops me from syncing anything that I have newly added. If anyone has had this problem before or knows someone that has, please let me know how I can fix it. I have uninstalled and reloaded itunes 4 or 5 times, but the problem is still there. I might add that I have been using itunes and purchasing apps for 2 to 3 years without any problems. HELP.
You would get better response from the iTunes community forum.
Have a nice day! -
I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server where the PDFs open fine) I get an error 'There was an error processing a page. Invalid function resource' The other one just doesn't open at all. Can anyone help with this please?
Hello,
Are the pdf linked correctly in the website? Is this a public website? If yes, please post the link here.
~Deepak -
Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated
I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0) -
Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...
hi I have been trying to do this, but PE13 comes up with a fail message saying that file types are not supported, am only trying to import jpeg files so can't understand this. So far have been unable to use PE13 at all, any ideas anyone please!
-
Im have a problem with my adobe id when i try to covert pdf files.
Im have a problem with my adobe id when i try to covert pdf files.
I think your question should go in the ExportPDF forum,
http://forums.adobe.com/community/exportpdf -
Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks Ben [email protected]
Hello Trevor
Thanks for your message. You can custom set pages but there are no preset of page sizes like A4, A3, ect. I cannot click the size preference, nothing comes up
Ben -
hi, i have problem with my apple id when i want purchase app even free one, asked me for complete my card informations... but i don't want to use debit card because already i have gift card and charge it in my id... please help me.
when i unchek the card information it was show me an error!Though you are being asked for card details it doesn't necessarily mean that the card will be charged for the purchase (unless you want to gift content). Have you tried entering your card's details to confirm the account ? You should then be able to remove it.
From http://support.apple.com/kb/HT5582 :
When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance
Is it a new account ? If it is then unless a new account is created by following the instructions on this page (the instructions won't work with existing accounts) : http://support.apple.com/kb/HT2534
then you will need to enter card details (debit cards are no longer accepted in all countries) before the account can be used to download any item from the store. -
IS ANY ONE HAVING PROBLEM WITH LIGHTROOM CC BRUSH WHEN THE GPU IS TURN ON
F. McLion wrote:
Update your graphic card driver to the latest version.
btw.: Rule number 2 - Do not use all caps - Netiquette Wiki
And for a very practical reason from your point of view: using all caps looks like SHOUTING, and people will concentrate more on the SHOUTING than on answering your question. Some will just ignore you for this reason.
If updated drivers don't fix the problem, perhaps you can tell us what is the "PROBLEM WITH LIGHTROOM CC BRUSH WHEN THE GPU IS TURN ON" that you are having.
Maybe you are looking for
-
PS CS6 will not update to Camera Raw 7.2
I have a fully licenesed version of CS6, along with LR 4.x. LR updated to Camera Raw 7.2 about a week ago. PS CS6 (extended 64) will not find the update. It is a pain in my sitter every time I go to edit a photo to see a warning. I do not want to hid
-
For some time prior to Mar 7 FireFox (27.0.1) had started "not responding" when I clicked on any link on any page. In desperation I uninstalled and re-installed FireFox on Mar 7. The problem came back. The only other thing that I noticed when I looke
-
I restored my iPhone and I cant view the purchased apps
I also have mountain lion with the new itunes and I can't find the "purchased" button anywhere. My friend told me that she had the same situation and she had to install evrething from scratch - one by one. any help, please?
-
Many apps are crashing on start
My co-worker on an iMac running 10.6.8 today started having an issue where many apps are crashing on startup. They all have this stack trace in Thread 0, the thread that crashed: 0 com.apple.CoreFoundation 0x9505aaa3 CFDictionaryCont
-
Download firmware to UCS PE Fabric Interconnect fails
I think because the Local Storage Information shows the bootflash partition, opt partition and workspace partition all have a size of 0MB. How can I increase the size of the Local Storage in the UCS Platform Emulator? Thanks