Problem with lenovo T530 display

I have recently bought lenovo T530, it had win7 pre-installed. and win8 upgrade disks available. I have immediatly upgraded to windows 8 then win8.1.
the problem is that the display is showing yello color instead of white, the yello keep flickering and although I have upgraded the drivers I still see the white colors as having spots of yello.
please help.

Okay here it goes...
1. First you need to save the T/W icc profile from this link: My custom profile
2. Right Click your Desktop and select "Screen Resolution"
3. Click "Advanced Settings"
4. Select "Color Management" Tab
5. Click "Color Management" button
This is where it can get a little confusing but I will try to make it clear.
6. Now that you are at the "Color Management" window, go to the "Advanced" Tab
7. Click the "Change system defaults..." button
Another "Color Management" window will open that looks just like the window you were in before, the only difference is that this one is called "Color Management - System Defaults"
8. Now go to the "Advanced" Tab in this new Window.
9. Next to the "Calibrate display" button there is a little square tick box which says "Use Windows display calibration", normally this does not have a tick in the box. Please tick this box and then press "Close"
You will now be back at the "Color Management" window, not the "Color Management - System Defaults" window.
10. In the "Color Management" window go to the "Devices" Tab
11. Place a tick next to the "Use my settings for this device" box.
12. Below go and press the "Add" button.
13. Browse to where you saved the .icc or .icm profile you want to apply and select it.
14. Now select your profile and press the "Set as Default Profile" button
If all has been done correctly you should notice a big difference on how colors are displayed. It should be for the better. If you want to toggle between having your profile ON and OFF, just tick or untick the "Use my settings for this device" box.
If you've been used to using your display with poorly calibrated colors, the new profile may come as a bit of a shock to your eyes but the colors should now be much closer to being correct than the default factory profile which is not even calibrated for the display. For example, if you are using the Windows 7 theme, you will immediately notice that the greys around boxes are grey now, not a light bluish grey.
Cheers
W530 | 3840QM | 32g @ 1.35v CL9 1986z | 512g 840 Pro | 1t HGST 7200 | FHD AUO v.4 | Quadro K2k | GOBI 5k | Centrino 6300

Similar Messages

Problem with repaint of display after a click event

Hi,
I have a problem with repaint of display. In particular in method keyPressed() i inserted a statement that, after i clicked bottom 2 of phone, must draw a string. But this string doesn't drawing.
Instead if i reduce to icon the window, which emulate my application, and then i enlarge it, i see display repainted with the string.
I don't know why.
Any suggestions?
Please help me.

modified your code little
don't draw in keyPressed
import java.io.IOException;
import javax.microedition.lcdui.Canvas;
import javax.microedition.lcdui.Command;
import javax.microedition.lcdui.CommandListener;
import javax.microedition.lcdui.Display;
import javax.microedition.lcdui.Displayable;
import javax.microedition.lcdui.Graphics;
import javax.microedition.lcdui.Image;
public class PlayerCanvas extends Canvas implements CommandListener{
     Display display;
     Displayable dsp11;
private Image play, pause, stop, next, previous = null;
private int gamcode;
private Command quitCmd = new Command("Back", Command.ITEM, 1);
public PlayerCanvas(Display display,Displayable dsp11){
     this.display =display;
     this.dsp11 =dsp11;
     addCommand(quitCmd);
     createController();
     setCommandListener(this);
     display.setCurrent(this);
          protected void paint(Graphics g)
          g.setColor(255,200,150);
          g.fillRect(0, 0, getWidth(), getHeight());
          if (play != null){
          g.drawImage(play, getWidth()/5, getHeight()-50, Graphics.BOTTOM | Graphics.HCENTER);
          if (stop != null){
          g.drawImage(stop, getWidth()/5, getHeight()-10, Graphics.BOTTOM | Graphics.HCENTER);
          if (next != null){
          g.drawImage(next, (getWidth()/5)+10, getHeight()-30, Graphics.BOTTOM | Graphics.LEFT);
          if (previous != null){
          g.drawImage(previous, (getWidth()/5)-30, getHeight()-30, Graphics.BOTTOM | Graphics.LEFT);
               /////this will draw on key UP
               g.setColor(0,0,0);
               System.out.print(gamcode);
               if(gamcode==Canvas.UP){
                    g.drawString("PROVA",10, 0, 0);
               }else if(gamcode==Canvas.DOWN){
                    g.drawString("DIFFERENT",10, 30, 0);
private void createController()
try {
play = Image.createImage("/icon3.png");//replace your original images plz
pause = Image.createImage("/icon3.png");
stop = Image.createImage("/icon3.png");
next = Image.createImage("/icon3.png");
previous = Image.createImage("/icon3.png");
} catch (IOException e) {
play = null;
pause = null;
stop = null;
next = null;
previous = null;
if (play == null){
System.out.println("cannot load play.png");
if (pause == null){
System.out.println("cannot load pause.png");
if (stop == null){
System.out.println("cannot load stop.png");
if (next == null){
System.out.println("cannot load next.png");
if (previous == null){
System.out.println("cannot load previous.png");
          protected void keyPressed(int keyCode)
               repaint();
               if ( (keyCode == 2) || (UP == getGameAction(keyCode)) ){
                    gamcode = UP;
                    repaint();
                    else if ( (keyCode == 8) || (DOWN == getGameAction(keyCode)) ){
                         gamcode =DOWN;
                         repaint();
          else if ( (keyCode == 4) || (LEFT == getGameAction(keyCode)) ){
          else if ( (keyCode == 6) || (RIGHT == getGameAction(keyCode)) ){
          public void commandAction(Command arg0, Displayable arg1) {
               // TODO Auto-generated method stub
               if(arg0==quitCmd){
                    display.setCurrent(dsp11);
}

Strange problem with Lenovo S650

I have an interesting problem with Lenovo S650.
If it stay in 2G/3G mode - it connect and work in 3G network well. But if I put "only 3G" mode, it don't connect to the 3G network.
I changed SIM-cards, modems, firmware, mobile operators - Nothing change.
What is the problem? Thank you.

Because your network needs both 2G and 3G to establish an internet connection. When the signal is low ,3G is favored/preferred (WCDMA Preferred or Auto )...but that uses more power. Don't actually need 3G all the time.
This isn't the root of your problem ...Actually isn't a problem at all .
Now can you tell me your firmware build number(Settings>About phone.. ) ?
Did you had this problem from day 1?
Did you get the phone from China and flashed the ROW firmware yourself? Got the firmware from some Russian forum and changed some regional code at the first boot...by any chance?
Beside flashing different baseband modems, have made other alterations (Like changing engineering mode settings... )
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Problem with hotmail calendar display

Problems with hotmail calendar display.

I am almost a total computer novice and am having what I think is the same problem Just got my first Apple computer (Macbook Pro). MSN Hotmail is my email account. All the events on my 'hotmail' account are now unreadble because they are squished to the left side of the screen and I don't find any instructions as to how to fix this in the system. This problem didn't exist when I first started using my MAC two days ago, but now I'm stuck. Everything else in my 'hotmail' seems to work fine. Don't know what Chrome or Firefox is or if there is a cost for them. Also, have never downloaded a program if any kind.
My calendar is critically important to me and I don't have a clue as to what to do now. Hope you can help.
Thanks. Linda

Since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

Try using Settings > General > Reset > Reset All Settings.

Screen display problem with Lenovo 3000 N100

Hi,
My Lenovo laptop is having a problem with screen display. When i boot the laptop (keeping the screen at 90 degrees to the key board) , there is no display . However, when i tilt it down (lesser than 45 degrees) the display comes back to normal.
In addition, the mystery is that this doesnt happen if do the same after 5 minutes. No matter at what position i have the screen, it works perfect!
Is there a solution for this ? Can some one explain why the display is normal after warming up, but not in the begining (booting) stage.
Senthil.

Lose / pinched wires possibly.
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-63486upper
I had to re-seat mine , and I still have to wiggle the upper right corner .
A common issue I here,although I just purchased a second used N100 and the screen has no issures.

Problem with lenovo t60 and the vga output

I have a problem with the vga output and the lenovo t60
When i put the videoprojector connector in to the lenovo t 60, the projector reponde is:
Not supported
H: 48.20khz v: 143,10 hz
On my desktop pc the projector function on 1024x768 resolution and the 60 hz to refresh.
The same configurations are on my laptop and the projector doesn't function
Please help me.

I too have this problem. My T61 worked fine for about a year, and then suddenly would no longer project. I had made no changes to the settings for the external display, though since the problem started I've tried many combinations without success. Typically the projector reports that the frequency settings the laptop is sending are unsupported. In my case the vertical rate is usually correct (60 Hz) but the horizontal rate varies wildly.
I suspect a hardware problem, as this post suggests: http://www.edugeek.net/forums/av-multimedia-related/32128-laptop-wont-display-projector.html. (Note the message claiming that 6 out of 40 Lenovo laptops exhibited this problem.)
Since my system is still under warranty I guess I'll have to get it repaired, but I'd rather hear of a software fix...

Experiencing three problems with Thinkpad T530 (Network, keyboard, and touch pad)

I bought thinkpad t530 2 years ago and gave it to my sister 4 monts age and recently she is experiencing few problems.
Before I mention any problems with it, I would like to mention that my sister hasn't updated software or driver for more than 60 days through lenovo solution center.
First, she cannot connect to a network (both wirelessly and internet cable).
The error says "There might be a problem with the driver for the Wireless Network Connection 2 adapter"
Second, the keyboard is not working.
The keyboard works fine when it was in BIOS mode and the keys associated with Fn keys work fine too, such as brightness contorl and backlit keyboard keys. However, it seems like the keyboard doesn't work in Windows 7. When she went into drivers manger to see what was the problem, it says, "Windows cannot load the device driver for this hardware. The driver may be computed or missing. (Code 39)"
Third, the touchpad and red pointer is not working.
Similar with the keyboard problem, the touchpad and red poting device is not working. In the device manger it says,"This device cannot start. (Code 10)."

Hi Rbtlr0215,
Welcome to Lenovo Community!
As per the query we understood that you are facing multiple issues on your ThinkPad T530.
For keyboard issue, check if the issue persisting in ‘Safe mode’ option. Check with uninstalling the Keyboard adapter from device manager.
For internet issue, check if the issue persists in ‘Safe mode with network’ option, Check with uninstalling the Wifi drivers from Control panel – Program & feature options.
For Touchpad issue, check with uninstalling the UltraNav drivers from Control panel – Program & feature options and restart the system, let the Windows install the generic driver for your system.
After performing all the above steps run thinkvantage system update utility to check for latest driver for your system.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Problem with data not displaying in website

Hello All,
I am having a problem with one of our applications. It is written in ColdFusion and uses SQL server. The problem that we are having is when we use the URL Http://bma.com (that is not actually the site name) we cannot see all the data that it is suppose to pull in. I get an error on page and when I select to view the error this is what I get
Message: 'WddxRecordset' is undefined Line: 184 Char: 2 Code: 0 URI: http://bma.com/user_maintenance.cfm and Message: 'jsusersTLV' is undefined Line: 3208 Char: 6 Code: 0 URI: http://bma.com/user_maintenance.cfm
If I put the IP address in the URL for example http://165.83.109.246/bma/login.cfm all of the data is displayed as it should.
Any thoughts or sugguestios on how to correct this?
Thanks

Yes, the user_maintenance.cfm is one of the forms that the data is not displaying on. There are multiple forms in the application and that just happens to be one of them. the login.cfm is just the login screen. Once you select your name and enter your password to the application then you can select the user maintenance form. If you select someones name the application should pull in all of that persons information. That is the problem, it is not pulling in any information on the user. We get a blank screen where data should be. When we use the IP address in the URL and select someones name in the user manintenance form, it pulls in all the data from that user as it should.

Problem with two thunderbolt display's daisychained

hey,
i'm having problems with my mac setup. i've got two thunderbolt displays, hooked to a 15" mbp retina laptop.
i've got my iphone hooked to one of the usb ports of the display then i've got a keyboard, a superdrive and a charger for my magic mouse hooked to the displays as well as a firewire hd. two usb 3 hard drives are hooked directly to the mbp.
i also changed the audio midi setup to let the audio pla through both of the displays to get a better sound. the mbp is closed so only those two displays get a video signal.
i have issues when data is transfered along the lines. f.eg my keyboard doesn't work from time to time, my iphone wont be recognized when connected to the dock. not really sure what the problems is a the transfercapacity shouldn't be to it's limit.
could it be a energy problem? that the displays don't get enough power, my power strip has a voltag controller in it, might that be a problem?
greets.

I think Apple should extend the warranty if they have a known manufacturing issue. I won't be investing another $1000 on a display from Apple ever again. I can't afford it. I can by an LG, Viewsonic, Dell, or "fill in the blank" for a fraction of the cost.
I expect a $1000 display to last me more than 20 months.
-md

Problem with daemons start display [SOLVED]

Hello,
I have a problem with the display of daemons startup, i'm not sure what could be wrong, here's a screenshot taken y fbgrab
rc.conf -> http://arch.pastebin.com/618485

_Gandalf_ wrote:Just edited mkinitramfs.conf and added my resolution and of course regenerated the archck image, this worked...
When adding the resolution and theme to mkinitramfs.conf, does it need to be presented in quotes (as shown below) or without quotes?:
Or does it make a difference??
# Add a theme to enable fbsplash, Try 'darch', it's included in the gensplashutils.
FBSPLASH_THEME="darch"
# Resolution to use, 1024x768 will be used if left blank. Format is '1024x768'
FBSPLASH_RES="1024x768"

Problem with subtitles automatically displaying when they shouldn't

Hi all,
I've got a DVD with multiple languages (English, Spanish, and French) and one subtitle stream (English) on the main program of a DVD I am authoring. I would like the DVD to default to the English audio stream and for the subtitles to be in the "off" state". The user can then select via a menu button if the subtitles are to be displayed or not.
The problem is, on certain (multiple) DVD players, the client is telling me that the subtitles are automatically displaying, regardless of whether or not they have chosen to show them. Of course, none of my test players exhibit this behavior, so it is difficult for me to troubleshoot what the problem might be.
I have tried setting it to default to a blank subtitle track and have also tried removing the English language designation on the subtitle track (which feel more like workarounds more than actual solutions), but the subtitles are still automatically displaying.
Any guess as to what is going on? Is this a problem on the client end, or is there scripting I will need to add to ensure consistent results from player to player?

I was able to solve the subtitle display problem with some simple scripting. For some reason certain DVD players (a fairly high percentage) are ignoring any Set System Stream commands from the DVD.

Problems With MBP Retina Display late '13

I Have some problems with my mbp:
-I Can't use bluetooth because wifi stop work, it's impossible to surf the internet.
-Raw and Jpeg preview too slow.
-Mail problems every time I open it.
-Music stop when I use lightroom.
-I had send 4 times the computer to SAT and APPLE don't give me a solution.
Any recommendation.

thanks! yeah i recorded it so i hope they will take the problem more seriously.
Unfortunately i don't have an applecare protection plan, but i hope that the proof that i've been in an apple store for the same issue already in april will help me somehow.
I also think that when i touch with my hand both chassis and display i make some connection working again. Maybe i'm the radioactive man, or i have some special powers...or for the first time time in my life i bought a bugged apple product. But i think is more possible one of the first two options!

TS3276 Problem with mail not displaying the arrow "replied"

Hi
I having a problem with my mail account. The arrow appearing on the side of a message after being replied do not appear anymore. It is therefore hard for me to keep track if I replied or not to a specific email. The email is still being sent and received.
Any help would be appreciated.

I am having the same issue. I have multiple imap accounts and one of the accounts does display the replied to arrow after replying to a e-mail. I have check every setting I can think of, with no sucess.. Any luck fixing this issue??

FireWire (and USB?) problems with 23" Cinema display

Hello.
Whenever my G5 wakes from sleep, I seem to have problems with FireWire devices attached to the Cinema Display (and, possibly, the USB ports also). Somehow, it seems that the "wake" signal is not transmitted to them.
Specifically:
a FireWire hard drive does not spin up (a USB drive connected to the back port does, as does a FW 800 drive also connected to my PowerMac). When I try to access it, then it finally spins up.
An EyeTV 200 device fails to connect (i.e., display TV or record shows) unless the Fi cable is unplugged and reattached.
This happens WHENEVER the Mac sleeps. However, if I attach those two devices directly to my PowerMac, they function just fine, using the same port the Cinema Display is attached to.
I don't have other comparable devices attached to the USB port of the Cinema Display, except (previously) for a Plextor ConvertX DVR (a USB 2 device), which exhibted the same problems as the EyeTV 200, which is why I tried swapping it with the FireWire-based EyeTV (unsuccessfully). So I have some evidence that the USB port has similar problems, but nothing conclusive.

Hey Scott
You are not alone. I'm beginning to think there is an issue with the power supplies of the 23" displays.
In my case, my computer is set to never sleep, while the display is set to sleep atfter 30 mins or so.
It appears that the computer won't wake up in these cases, but in fact what is happening is that the display won't wake up.
Multiple re-starts are sometimes necessary to get the display up and running again.
While your problem seems slightly different, I think that the two are related in that there is not enough power being delivered from the power supply for the monitor to both your USB and Firewire devices connected to your display.
I don't really have a solution as of yet.... aside from purchasing a new power supply from Apple... But, you are not exactly alone in your misery. Should I run across a fix for this aside from the power supply, I'll be glad to let you know.
Generally after HD's spin down, they usually don't spin up unless they are accessed. If you have any open files on your FW800, that may explain why it does spin up when you wake up your system.
One thing you can try, in the System Prefs, under Energy Saver, uncheck "Put HD's to sleep". This may cause all of them to spin up when you wake your system up.

Problem with lenovo T530 display

Similar Messages

Maybe you are looking for