Problem With Logging in to Palm website

Here is a problem I posted to another topic but it belongs here under browser questions. When I try to open the Palm Inc. website, the various parts of the site seem to overlay earch other. It's as if the page were cut up and dropped onto my screen, with some areas not readable or partially visible, (and usually all the blanks to fill in are covered. ) I have tried to log into their discussion group but when I try to activate my account, I find the Continue button is covered by the site's various other tabs. An email to Palm has resulted in no answer yet, but I'm hoping someone here has had a similar problem. This has happened on only one or two other websites and I can't remember which ones.
By the way, I am using the Explorer 5.3 browser which comes with my bellsouth.net email program. Besides the loyalty to Mac, should I switch over to using Safari? Before posting this, I tried the Palm website and it opened fine, every piece of it where it should be. I have seen a number of problems using it, like not being able to log into bank checking account websites.
This is my first login here on Apple discoussions, so if I am in the wrong area, pls let me know. bob.c

Bob,Welcome to Apple Discussions. Palm web site seems fine in Safari 1.3.1 under Panther, but is improperly rendered in IE 5.2. There are several Web Browsers available for the Mac and IE is one that is no longer supported. I've not come across any issues with Safari yet. (Just a couple of sites tell me I'm going to have problems - but I don't). Here are some other choices of Mac Web browsers. (The ones in Red are the full on browsers.)
What version of Safari are you using?
regards
mrtotes

Similar Messages

  • Problem With Logging in for some websites...

    there are some korean websites that I used to go
    frequently with my PC....
    they work with the web browsers I have...
    and yet,I cannot log in for some reason...
    can somebody help me find out
    why it is not logging in or
    if somebody knows will u tell me??
    also if there are any ways to log in....;;;
    +_ +
    thank you....

    Here is another similar problem altho unfortunately not an answer to the first problem.. When I try to open the Palm Inc. website, the various parts of the site seem to overlay earch other. It's as if the page were cut up and dropped onto my screen, with some areas not readable or partially visible, and usually all the blanks to fill in are covered. I have tried to log into their discussion group but when I try to activate my account. I find the Continue button is covered by the site's various tabs. An email to Palm has resulted in no answer yet, but I'm hoping someone here has had a similar problem. This has happened on only one or two other websites and I can't remember which ones.
    By the way, I am using the Explorer 5.3 browser which comes with my bellsouth.net email program. Besides the loyalty to Mac, should I switch over to using Safari? I see a number of problems using it, like not being able to log into bank chsecking account websites.
    This is my first login here on Apple discoussions, so if I am in the wrong area, pls let me know. bob.c

  • Problem with youtube and other video websites

    I have a problem with youtube and other video websites:
    Everything is up to date (flash, FF, my plug ins..) but i keep getting freezes when the video loads. I can hear sound but i can only see the first frame of the video.
    I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
    I hope someone could help out, i've searched for answer on google before and tried everything i saw but it didn't helped.
    grts,
    agrash

    Hmm, so that person had a conflicting plug in.
    Problem is that whenever i enter firefoxes safe mode which disables every plug in, i still have the youtube freeze/crash

  • Problem with logging in to BW after installation finished

    Hi all,
    I've a problem with logging in to my BW after i've finished installing it.
    First, i'd add that my system is a standalone server. the GUI and the Froentend are already installed on the server. I'm trying to login the BW from the server.
    After i'm starting my BW server from the R3 Management Console I'm trying to login my system and i get dump even before i'm getting the Log-In screen of SAP BW.
    the dump i'm getting is "DBIF_RSQL_INVALID_REQUEST".
    I've no idea what to do, i am stuck in that situation for 1 week, couldn't find any information about it. I've tried to read logs and couldn't find something specific.
    Someone suggested it's a connection problem, but couldn't help more than that.
    Any help or suggestion is mostly welcomed,
    Thank you all in advance,
    Yoav.

    Hi again,
    I've increased the virtual memeory, but it didn't help. Doesn't seem to be memory or space problem but more like a connection problem (to the SQL server - which is located at same computer where i'm tryinf to run the BW).
    And to your answer: I'm using SAP Gui 6.4
    Any more suggestions?
    Thank you,
    Yoav.

  • Help intermittent problem with logging in

    Help i have intermittent problem with logging in, sometimes it just comes up with the desktop without any icons or dock and i have to restart the server so i can log on properly, but it doesn't happen all the time, any ideas would be appreciated???

    The clients login window just shakes and won't login. I did find one thing that helps some of my Mac Lab woes.
    Some students get a dock that only has 3 icons. These students also will have saving and printing problems when they get this default dock.
    I think some of the problems occur when the student gets over quota, some preference files get corrupted.
    1. Student will login.
    2. Open the student's home folder. Then open Library and Preferences.
    3. Find the file com.apple.homesync.plist and delete it.
    4. Empty Safari Cache and the user's Trash Can and make sure they are not over quota.
    5. Logout and login.
    This will fix some problems, but not the problem when students can't login at all.

  • Problem with logging

    Hi, I have a problem with logging into PSN. When I want to log into in there comes an error which is NW-31456-9. I have something like that for 1 day. Anyone know how to fix this? I tried manual settings for my internet but it doesn't work.

    Did some more debugging. The application is an application running under the Glassfish 2.1.1 application server. The logger is configured in a Lifecycle module and accessed in an EJB module. Here is what I found.
    With JDK 1.6.0_05, the logger that I get in the Lifecycle module is the same logger instance that I get within the EJB where I am logging. In the EJB, I get all of the handlers and print out the information and all is correct and the logging works with the handler.
    Change the symbolic link to point to JDK 1.6.0_22 and the logger that I get in the Lifecycle module is not the same logger instance that I get within the EJB where I am logging. This time in the EJB, the logger's level is "null" and there is no handler associated with the logger. So that is why it is not logging. What I don't understand is why the logger instance is retrieved in the EJB is not the same logger instance in the Lifecycle module.
    Any ideas will be greatly appreciated.

  • Problem with logging in to apex application builder listener

    I have problem with my settings and am posting this in hope that someone else out there had similar problem and solved it!
    I am trying to use reverseproxy to access to our db through apex listener.
    It's been all set-up and I can login to the application it self either through proxy or no proxy using the listener.
    But when I try to login to apex application builder I cannot do it through proxy(with no proxy, it works).
    It just refreshes the login page when I click login....
    I tried to upgrade the listener to the latest v1.1(using 1.0.2) but it causes my tomcat to crash...
    So solution i am looking for is how to make logging in work through proxy..
    In the firebug it is showing that below and few other request status as 302 moved temporariry
    http://myserver:8080/testsin/apex/wwv_flow.accept
    Where as with no proxy it is saying Found.....
    Any thoughts??
    Thanks
    Sin K

    Hello Sin K,
    so proxy and Tomcat are located on different machines as well? Is the proxy able to commuicate with the Tomcat on the configured internal ports and is the proxy able to lookup the hostname you configured for the Tomcat?
    For the connector, the proxyName and proxyPort should be the parameters the client uses to call APEX. So if your clients should call via http://proxyserver:8080/testsin/apex the settings would be
    proxyName=proxyserver
    proxyPort=8080Reason for this is that applications (e.g. the APEX Listener) generate there URL references with these parameters.
    But does your proxy actually serve on port 8080? And is that port accessible by clients? Do clients accept cookies from that server?
    In my case, there is only one 302 which redirects to http://host:port/apex/f?p=4500:1000:sessionid which is correct.
    If you look into your first post request in firebug, what's in the request header?
    -Udo

  • Problem with logging in Creative Cloud account

    Hi, I have a problem with my Creative Cloud account. It seems like I logged out about a week ago and when I tried to log in again just now I didn't succed as the program said I have logged out of the system. My password is correct, I even changed it, it still does not work. I can log in on the internet though and my subscribtion is paid, I have no idea what to do. Please. Help.

    Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
    -and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
    -and 'looping' https://forums.adobe.com/thread/1504792

  • Problems with Repeating Events on Palm and iCal

    Hi,
    I'm having a problem with daily-repeating events entered into either my Palm or iCal. When I put events in my palm and sync them to iCal, the iCal calendars look right, but then the Palm events become truncated,i.e. only the first day of daily event will be visible. If I do nothing but just sync again, the events in iCal become weirdly duplicated, i.e. if an event had two repeats, the "original" occurrance will be there, along with a second, starting on next day of the series, lasting for the same number of repeats. Is there any way to make one calendar the overwriting calendar while using iSync? Or do you know of some other fix? This problem doesn't seem to affect other repeating events, either monthly or yearly.
    Thanks
    20" iMac with Intel   Mac OS X (10.4.10)   500 GB HD, 2GB RAM 60GB Video iPod

    As I just posted in another thread, there are a whole series of 'representation disconnects' between the Palm calendaring application and iCal.
    While this article— iSync: About Syncing Recurrent Events Between iCal and Palm OS Based Devices—would lead to you believe that iSync is primarily the issue, it's not: this behavior occurs primarily because of the differences between the calendaring programs in each environment, and only secondarily because of the manner in which records are pushed and pulled by the synchronization framework.
    iSync itself is simply another compliant sync client, and there is unfortunately no workaround for the issues delineated in the article.

  • Problem with Picsel Smart Office Palm Pre 2

    I bought SmartOffice last weekend, but when I launch this app, the app tells me the licence is not verified in a red screen of death.
    I have an unlocked EU Palm Pre2, I use it in Spain. The device is activated with Movistar, but now it is use it with Simyo.
    I am extremely disappointed. I wish a solution or a refund. I have problems with NDrive and PDK GPS bug also, and after some months there is not a solution
    I cannot waste my money in apps that are not working.
    Post relates to: Pre p100ueu (Movistar)

    Well,
    I've solved my problem.
    I changed my Sim card with one of the carrier my Pre 2 was activated. Rebooted the Pre2 and then Smart Office was working.
    I replaced again, then sim card with my carrier one, and it worked again.
    This is a stupid thing, it seems that licenses are checked against carriers, but people change their carriers phone. 

  • Problems With Quicktime content from Apple website

    Hi
    I have problems visualizing various sections of the Apple website that contains quicktime content. (Safari thinks Quicktime is not installed)
    for example can't see shuffle giuded tour
    http://www.apple.com/ipodshuffle/guidedtour/tour/large.html
    or the video for the iphone os 3.0
    http://events.apple.com.edgesuite.net/0903lajkszg/event/index.html
    from the safari error console i can see there are runtime javascript errors on calls to
    'AC.Detector', whose result is non an object, as you can see here
    http://i40.tinypic.com/1jb1qc.jpg
    http://i42.tinypic.com/15ejrb9.jpg
    Any idea?
    Thanks
    PS: i have no problems with quicktime from other websites, or from other parts of
    Apple.

    i don't know
    it could be an issue with something else, maybe iTunes
    look here
    http://discussions.apple.com/thread.jspa?messageID=8689671&#8689671
    same issue with 'AC.Detector' (I don't know what that is)
    i have not had problems with Apple quicktime content in the recent past (same Safari 4 Beta)
    i installed iTunes 8.1 recently

  • Problem with logs in DB13

    Hello!
    I have problems with clearing logs via transaction DB13.
    When I start this operation for the first time after starting SAP system this job is finished successfully.
    But then I have error in this job:
    Job started
    Step 001 started (program RSDBAJOB, variant &0000000000033, user ID SAP*)
    Format "X_PAPER" not defined for printer "$LOCL"
    Execute logical command BRCONNECT On host SAP-TSC
    Parameters: -u / -jid CLNUP20140505004009 -c -f cleanup
    External communication error at program start (see system log)
    SAPXPG_START_XPG_LONG: sy-subrc ne 0
    destination = %_TCPIP_%1
    SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.006
    SXPG_COMMAND_EXECUTE(LONG)
    <timestamp> = 20140505004031
    COMMANDNAME = BRCONNECT
    ADDITIONAL_PARAMETERS = -u / -jid CLNUP20140505004009 -c -f cleanup
    LONG_PARAMS
    OPERATINGSYSTEM = ANYOS
    TARGETSYSTEM = SAP-TSC
    DESTINATION
    SY-SUBRC =  902
    SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: x_error
    Job cancelled after system exception ERROR_MESSAGE
    And i have to restart the SAP for using DB13.
    Why it's happening?
    P.s. Yes, i changed SAPSR3 passwords via brtools and brconnect.
    Thank you for answering.

    Hello Janos,
    I checked SAPDBHOST parameter in DEFAULT.PFL:
    SAPDBHOST = SAP-TSC
    BRCONNECT is located in the directory with appropriate user rights.
    Also I checked developer traces:dev_rd
    LOCATION    SAP-Gateway on host SAP-TSC / sapgw00
    *  ERROR       timeout during allocate
    *  TIME        Wen May 07 16:08:10 2014
    *  RELEASE     720
    *  COMPONENT   SAP-Gateway
    *  VERSION     2
    *  RC          242
    *  MODULE      gwr3cpic.c
    *  LINE        6070
    *  DETAIL      no connect of TP sapxpg from host SAP-TSC.localdomain after 20
    *              sec
    *  COUNTER     11
    But i can't understand why rebooting sap system the first clearing logs finish successfully, but then i have errors.

  • Just purchased Wndows Vista and having problems with the port for Palm 125

    I just purchased a Windows Vista computer and having problems with getting my Palm 125 to sync with the desktop.  I get an error message saying:  "Com1 not available"  What do I do?
    Thanks,
    Frustrated
    Post relates to: Palm m125
    This question was solved.
    View Solution.

    Sorry, that didn't work.  I get no drop down menu from the Hot Sync Manager for the Serial Port.  What comes up often is:  "The selected port, COM1, is not available at this time.  Hot Sync Manager will open the port when it becomes available." 
    Could it be the Norton Antivirus Firewall that is preventing the Hot Sync Manager to open the Serial Port?  Just a thought.  Thanks for your help.
    Post relates to: Palm m125

  • Problems with downloading driver from HP website

    I have purchased a used HP Deskjet 2050 All in 1 printer. The installation CD is cracked and cannot be used. I have gone to the website and downloaded the driver for my printer ( have Windows Vista 32 bit), following the instructions step by step.
    The last window that pops up asks if I want to install the driver modem, I click yes, the box stays on the screen showing the progress bar until it is done, then goes away. Then nothing......no install wizard or any instructions to complete the installation. I also have tried the add a printer on my Control Panel/printer screen, but my device is not listed in the selections available. Is there something else i should do....or should I just order the CD?

    You could possibly be having problems with the desktop computer that is keeping the installation from completing.  The laptop is probably Windows 7 whereas Vista can make installations harder sometimes.
    --The Progress Bar on the Software Installation Stops or Stalls--
    Click my link for detailed instructions on what to do.  Let me know if you get any error messages please and also I will need to know if you are trying to install the printer USB or wireless.
    I will be happy to help.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • FTP sync problems with Dreamweaver MX on Prostores website

    I ftp/sync, design and maintain my website Carnelian.com with Dreamweaver MX. My website is hosted by Prostore.com (an Ebay company). They have just recently migrated to new servers and are now requiring FTPES security which apparently is not supported via Dreamw
    eaver Mx (which uses SFTP). Because of this I can no longer FTP or syncronize my website, upload files, images etc. Is there some
    work around so that I can meet their secure ftp requirements and still use Dreamweaver to ftp/sync my website? I can get a third party FTPES client and upload my site changes, images etc but then my website will no longer be syncronized in Dreamweaver MX which would be a great inconvenience and problem for me.
    Is there a solution to this problem?
    ================================================================================
    Here is info on the Prostores migration from their support pages and support personel:
    2009-07-26 01:10:46 - ProStores Customer Support
    ProStores has decided to abandon FTP as an access method to the platform in order to remain compliant with certification authorities
    like PA-DSS and PCI. Dreamweaver does not support FTP TLS/ES or FTPS. Based on the research performed, it appears that Adobe is not
    working on providing this functionality anytime soon. The following options are taken from ProStores Knowledge Base:
    There are many FTP programs available. There are evaluation, free, shareware and paid versions of different FTP programs. ProStores
    only supports FTP programs that support FTPS with SSL/TLS encryption. Below is a list of widely used secure FTP programs (in no spec
    ific order) that are compatible with ProStores FTP services.
    · FileZilla (free)
    · FireFTP (Firefox add-on) (free)
    · WISE-FTP 6 ($)
    · CuteFTP ($)
    · And many others
    If you upload images using the FTP process, there are new security settings and requirements. FTP protocol changed to FTPS (FTP over
    SSL), also known as FTP/ES (Enhanced Security). Access to the new FTP/ES server will be through the URL myftp.prostores.com.
    Update your FTP settings as noted below. In some cases, you may need to use a different FTP client to support the additional securit
    y settings required on the new platform.
    hostname = myftp.prostores.com
    Server type = FTPES or FTPS
    port = 21
    Logon type = normal (not anonymous)
    username / password = primary ProStores login credentials
    Connection type = FTPS
    SSL Settings = Use SSL-encrypted connection with Auth TLS (or TLS 1)
    FTP client requirements = must support SSL-encrypted/TLS connection (Auth TLS or TLS 1)
    Several free and paid FTP clients that support SSL encrypted connections include:
    FileZilla (free)
    FireFTP (Firefox add-on) (free)
    WISE-FTP 6 ($)
    CuteFTP ($)
    And many others"
    Operating System: Windows XP Professional
    Browser: Firefox

    I'm going to give Adobe and Google the benefit of the doubt on this one, and assume it is eBay being ridiculous. My anecdotal experience with Adobe and Google is that they do pay attention to technology trends and usually incorporate industry standard technology into their software. If it were just Dreamweaver that didn't support SSL/TTS I might have a different attitude, however blogger.com doesn't support publishing via SSL/TTS either, so I think the error if there is one, is on the Prostores side of things, and I'm guessing it would have made sense for them to support SFTP.
    At the same time I assume the Adobe eco-system is more likely to render a solution here than the Prostores eco-system. Is there some sort of plugin/additional piece of software that lets Dreamweaver masquerade a SSL/TTS connection?
    Leif Jason
    Internet Marketing Strategist | Mastermynde
    LinkedIn | Twitter | Blog

Maybe you are looking for