Problem with Mobile Phone Samsung G800 when put in "data transfer" mode

Greetings everyone.
I have a Samsung SGH G800 Phone with a 4 GB SD on it. Everything works fine except from when the I connect the phone to the computer and enable "data transfer mode" which should make the phone appear as a hard disk on my iMac.
the errors I'm getting from dmesg are these:
isk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6276] [LBlkNum 0] [FSLogMsgID 1281672978] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1281672978] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6532] [LBlkNum 32] [FSLogMsgID 2089623797] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 2089623797] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6788] [LBlkNum 64] [FSLogMsgID 2018660302] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 2018660302] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7044] [LBlkNum 96] [FSLogMsgID 1586086454] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1586086454] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6540] [LBlkNum 33] [FSLogMsgID 1771542890] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1771542890] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6796] [LBlkNum 65] [FSLogMsgID 977677278] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 977677278] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7052] [LBlkNum 97] [FSLogMsgID 1983087645] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1983087645] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7308] [LBlkNum 129] [FSLogMsgID 1984679439] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1984679439] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7564] [LBlkNum 161] [FSLogMsgID 882699219] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 882699219] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7820] [LBlkNum 193] [FSLogMsgID 1191153157] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1191153157] [FSLogMsgOrder Last]
Apparently it tries to mount the device but it gets an IO error, what could it be the reason in your opinion? It appears as a hardware level error to me, do you think is it so?
thanks for your time in advance.

HI,
If you go here you will see your phone is not supported by Mac OS X 10.5.
http://support.apple.com/kb/HT2824
Carolyn
Message was edited by: Carolyn Samit

Similar Messages

There is a problem with the phone app. When I want to call somebody the phone screen come too late. This will cause a problem if I call the wrong number

There is a problem with the phone app. When I want to call somebody the phone screen come too late. This will cause a problem if I call the wrong number. Apple please please please fix it as soon as possible and also check why the phone is always restart. I prefer to let us use the iOS 7 until you finished from the IOS 8 because Ios 8 still under construction there is a tones problems in the system. And this Will cause undirect problem for the iPhone 6

There is no apple here in this user to user technical forum.
Do this Use iTunes to restore your iOS device to factory settings

HT1222 I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit

I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit and sometimes it vanishes automatically. I,m confused.
Secondly i have an update IOS 7.0.4 waiting in my Software Update menu. I have tried so many times to update my iphone but it always fails to update the IOS 7.0.4. Any body suggest anything regarding this

Wow. Lots of help. Thanks apple

HT4993 I recently downloaded the latest iOS 7.1. A few days later I had an unrelated problem with my phone and Apple Store provided me with a new iPhone 5. However, when I tried to restore my backup from the Cloud, it said that iOS7 is required. what do

I recently downloaded the latest iOS 7.1. A few days later I had an unrelated problem with my phone and Apple Store provided me with a new iPhone 5. However, when I tried to restore my backup from the Cloud, it said that iOS7 is required. what do I do?

Update your iphone to ios 7.

Hi every time I go to write a tx on my iPhone it asks for my apple I'd sign in like when I buy an app or something and you have to enter your password is there a way to stop it doing this or is there some kind of problem with the phone

Hi every time I go to write a tx my phone asked for my sign in details like I have just bought something like an app of song ect I just press cancel and it goes away but still pretty annoying is there a way to stop this or is there a problem with the phone ? Thanks

If the login box keeps popping up either your acct is disabled or you are mistyping your pw.
Go here and try out your pw and reset if necessary:
http://appleid.apple.com/
Click on Manage ID and go from there.

Error when create a BP with Mobile Phone Number

So boring, call the BAPI "BAPI_ISUPARTNER_CREATEFROMDATA" to create a BP.However how to set this BP's mobile phone?
I saw a table in tables named "TELEFONDATANONADDRESS" ,from the description,it seems has the indicator to tell this telephone is a mobilenumber, however ,if I add this table, always got error ."Internal Error - ADDR_MAINTAIN_COMPLETE call error"
Who can tell me this.thanks very much

Thanks very much for your help.
Currently I use this BAPI to create BP with Mobile Phone.
Below is some key code section, hope it help the others:
CALL FUNCTION 'BAPI_BUPA_CREATE_FROM_DATA'
                      EXPORTING
                        partnercategory                    = '1'
                        centraldata                        = lwa_central
                        CENTRALDATAPERSON                  = lwa_info
                        ADDRESSDATA                        = lwa_address
                        ACCEPT_ERROR                       = 'X'
                      IMPORTING
                       BUSINESSPARTNER                    = l_bp_no
                     TABLES
                        TELEFONDATA                        = li_tab_tel
                        FAXDATA                            = li_tab_fax
                        E_MAILDATA                         = li_tab_email
it works,and you can choice if to add some communications or not

Has anyone else had any problems with their phone over heating and shutting down?

I've had my phone for less a month and I've already had issues with my iphone 4. On several occassions it has overheated and shut down. On one occasion I put the phone in the side pocket of my purse where, I also had a charger for my camera. When I removed the phone, it was hot...not warm but hot! On another occasion I was at the movies and put the phone face down on my lap, at one point i touched the phone and again it was hot. When the movie was over, and I looked at the phone it had shut down....this has happened a few times more since then. I've also had problems with the phone shutting down on it's own. I took it to my local apple store and the representative looked at my phone and ran a diagnostic check for me. He said the everything on my phone looked normal and that my phone probably needs a "breaking in" period...to give it a couple of months...He really didn't tell me much more...I don't use my phone for more than the basics...calling, texting, and some mild app use...I don't understand how I can be having these problems when I've had my phone for less than a month...The rep tried selling my the Apple insurance. He told me that through ATT I only have 30 days, and I would be better off getting this insurance. I feel very dissastisfied with the service I got. I was done with my appointment within 10 mins, I don't think the representative took the time to listen to my concerns.

Thanks for your reply, but I guess whether this was a silly question is a matter of opinion. That is the whole purpose having these forums...so that people can post their questions, silly or not. Maybe you are an Apple expert or have "techy" knowledge, but I don't. So what may be silly or stupid for you, can be completely different for a novice apple consumer like me. If you must know, I did do my research, and I did do the basic trouble shooting.All to no avail. I took my phone to the apple store, had it diagnosed and was told some very inaccurate information. I ended up going back today, and got a second opinion. This person actually took the time to talk to me and to better explain Applecare and my warranty. She also told me that there is no such thing as a "break in" period, and when there is a shutting down issue, even after a "restore" that it was better to get it replaced. Which is what she did. She replaced my phone. Obviously, the first person, by his own admission, was too tired and ready to go home to actually take the time to explain and offer other options...

MS-6967 how to get it to work with mobile phone tools?

I've recently bought a MS-6967 after borrowing a TDK BT dongle from a mate and successfully used mobile phone tools to put MP3 tones into my Motorola V525 phone. So I gave my mate his TDK BT back and thought I'd start using my MS-6967 instead.
I can get it to connect phone to PC OK but not with mobile phone tools, every time I get to set up V525 in MPT and it seems to just about to stop and find my V525, then MPT program crashes. I'm using XP Pro SP1, MSI 1.4.3.4 drivers which just came out and version 2.21c MPT even updated to 2.21f and no difference. Its driving me mad, is it the MS-6967 or what?
Any help appreciated.
Andy.

Hi again, thanks for the help.
Her phone seems to have a whole section specifically for connecting to Yahoo Mail, but unfortunately she doesn't have Yahoo Mail, she has a (name)@btinternet.com address (which was set up automatically when she got BT Broadband), which she normally accesses via Outlook.
I think she just has to set it up with her server settings, there is the setup to do this on the phone, but so far it's not working - I don't know whether this is because she hasn't remembered them all correctly (her PC is currently without a monitor so she couldn't check them), or whether it's because she needs to subscribe to some additional service? I thought that seemed unlikely, my friends all check their emails on their phones without any extra services - I'm afraid I've never had a phone sophisticated enough to do anything more than text on though so I don't know how it's done! Anyway thanks again for taking the time to advise, it's much appreciated!
SCJ

I have a problem with the phone speaker

I started yesterday to have a problem with the phone speaker, I cant hear anything when using the normal speacker, but its ok when using the loud speaker. I dont know what happened. its not working nether with phone calls nor calling apps such as viber

If you have a docking station try putting it on there. I lost my sounds, docked it and they came back immediately.

Problems with IP Phones registration to CUCME on SG200-50P

Problems with IP Phones registration to CUCME on SG200-50P
System setup:
- Router Cisco 2811 with IOS 12.4(24)T5 Advanced IP Services, CUCME 7.1, DHCP Server
   with HWIC-4ESW
- Switches:
   - old - SLM224P
   - new - SG200-50P (SLM2048PT), OS v1.3.2.02
- IP Phones 7911 and 7931, OS v8.4.2
One VLAN (for desktops and IP Phones) and one IP subnet, no voice VLAN.
Network diagram:
C2811---HWIC-4ESW---SWITCH---IPPhones
Problem description:
1. In the old setup with SLM224P everything works fine.
   Connected phones almost immediately (1-2 sec. after power up) get ip address, configuration and registers to CUCME.
2. When switch is changed to new SG200-50G:
   - ip phones get their ip address and tftp configuration very slowly - about 10-20 seconds
   - ip phones cant register to CUCME at all. On the router with SCCP debugging turned on there is no sing of registration attempt
   - after reconnecting the old SLM224P situation backs to normal
Things that have been checked or tried without success:
- ports speed and duplex auto, correct detection - although not tested with manual settings
- CDP/LLDP on/off
- smartport mode auto and most static settings, also with disabled smartport
- power cycle / reset
- spanning tree and port security settings
- solutions from that post - https://supportforums.cisco.com/thread/2232161
None of the above methods worked.
The only action that allowed ip phones to register was changing smartport role to static IPPhone + Desktop.
After that when phone was disconnected and then reconnected the problem exists again - no registration (IP Phone status DECEASED in CUCME). Same with power cycle/reset.
Please advice.
Thanks in advance.

1 - You have created the voice vlan?
Nope, flat network, one ip subnet (10 hosts and 10 phones)
2 - Have you set a phone on an untagged access port for the voice vlan to see if it works?
Yep, phones are connected to untagged access ports of the one and only vlan
3 - Have you tried to set the auto voice vlan on the switch so it dynamically assigns the role for ip phone + desktop?
Not sure about auto voice vlan setting, although there was no triggers to AVV - no static voice vlan, no CDP/VSDP advertisements of voice vlan.
We've tested static and auto smartport roles (independently of auto voice vlan feature) with successful auto-detection.
The switch was pretty much in default out-of-the-box config (beside management parameters).
4 - When rebooting the switch, you did ensure to save the start up to running config?
Yes, running to startup
5 - Have you manually set spanning tree PORT FAST for the phone ports?
No, we haven't tested that. But portfast should be set automatically for the desktop and ip phone smartport roles.

I have a problem with my phone n73

i have a problem with my phone n73
my memory work good and i can see it from gallery but when i want to save some thing it save directelly in memory dont give me choise and when i want to sign ring tone for alert or ringtone or massege i dont see any thing i save in memory or phone i see only tones whice come with phone
what can i do plz.

you need to go to file manager scroll right to memory card
find the tune you want as ringtone
select options-copy to folder-choose phone memory-choose sounds-choose digital-choose tones-save it here-
it will now apper in the tones selection
you can directly save txts and mms to memory card via message settings
i think if you do this bluetooth files recieved will be saved to memory card as well
pics can be saved to memory card via camera settings and the same for video clips
to save music use pc suite or even better a card reader
hope that helps mate

HT4623 updated to ios7 on Sunday - I am having major problems with my phone since - keeps freezing - updated itunes first then backed up my phone to my laptop. Is it worth it at this stage doing a restore?

I updated my iphone 5 to ios7 on Sunday and have been having m?ajor problems with my phone since. It keeps freezing and I have to constantly press the home and on/off switch to get it to restart. I had updated my itunes and backed up the phone before doing the update. I'm getting very frustrated at this stage as the phone is practically useless. Is it worth doing a restore? Bearing in mind that I just tried to do that and got a message to turn off the 'find phone' feature in settings and when I tried to get into settings the phone froze again.

I don't have a good answer for you but reading these forums, it seems that network drives can often cause problems with iTunes like you describe.
Patrick

I bought my iphone unlocked from carephone warehouse, I had a problem with the phone and apple swapped it over but they locked it to tmobile!!! what can i do?? I have changed contracts and can not use my phone!

I bought my iphone from carephone warehouse, sim free and with no contract. 5 months down the line I had a problem with the phone and I booked a genius appointment, they swapped my phone and gave me a new phone but they locked my phone to tmobile!!! I now do not use tmobile and I have an iphone which is locked to tmobile!!! I bought an unlocked phone and apple have locked it!!! what can i do?

In response to this, Carphone Warehouse (and Phones4U) sell what is commonly referred to as "sim free" handsets - these are not the same as unlocked. Sim free handsets will automatically lock to the first network sim card that the phone is activated with, and that will be permanently. The only way to unlock the handset would be to go through the network (T-Mobile I understand) and request they unlock it for you. More than likely, there will be a charge as you are no longer a T-Mobile customer.
If you ever want to purchase a new unlocked iPhone, the only place you can buy one is from Apple directly. Any other place will most likely sell sim free handsets.

I'm having an unusual problem with my iphone 4S. When I'm making a call, it suddenly sounds like my call has been invaded by aliens! Why is it doing this? I'm also having problems sending texts. Sometimes it sends sometimes it doesn't.

I'm having an unusual problem with my iphone 4S. When I'm making a call, it suddenly sounds like my call has been invaded by aliens! Why is it doing this? I'm also having problems sending texts. Sometimes it sends sometimes it doesn't. What is going on? Can it be fixed? I'm really not liking this new phone!!!!

Could be an issue with your Carrier and/or location...
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup... Restore as New...
Try a Reset...
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
http://support.apple.com/kb/ht1430

Problems with iPhone phone side

If this subject is in here already, I missed it in my search.
I've had my iPhone since Nov of 2007 and haven't had any problems with the phone side of it, until now. I've updated to 3.0.1, if I'm able to make/receive a call it's of very poor quality and usualy so bad I can't understand the person on the other end. If I haven't manually disconnected in frustration the phone will drop the call anyway.
The nearest Apple store is 3 hours away but from what I've been reading in here, the "Experts" don't know anything about v1.0 iPhones anyway so what would be the point of going. I have no need to upgrade to a 3G because I won't even use it for half of whats capable of. Heck, the v1.0 is more handheld than I need but up until now it has been the best phone I've ever had.
Is this an issue of the hardware being too old to play nice with the newer software or is this an ATT issue of using EDGE on a 3G network?

There is no issue with the older iPhones and the new OS (I have older original iPhone) running the latest OS (as so some of my friends, all with no issue).
Also, you are not using Edge on a 3G network, you are using Edge on Edge (they are different, the towers that had Edge get upgraded to add 3G or new towers are put in place with 3G and no Edge, yada, it isn't like Edge is replaced by 3G, they live separate lives)

Problem with Mobile Phone Samsung G800 when put in "data transfer" mode

Similar Messages

Maybe you are looking for